| #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt |
| |
| #include <linux/errno.h> |
| #include <linux/kernel.h> |
| #include <linux/mm.h> |
| #include <linux/smp.h> |
| #include <linux/prctl.h> |
| #include <linux/slab.h> |
| #include <linux/sched.h> |
| #include <linux/module.h> |
| #include <linux/pm.h> |
| #include <linux/clockchips.h> |
| #include <linux/random.h> |
| #include <linux/user-return-notifier.h> |
| #include <linux/dmi.h> |
| #include <linux/utsname.h> |
| #include <linux/stackprotector.h> |
| #include <linux/tick.h> |
| #include <linux/cpuidle.h> |
| #include <trace/events/power.h> |
| #include <linux/hw_breakpoint.h> |
| #include <asm/cpu.h> |
| #include <asm/apic.h> |
| #include <asm/syscalls.h> |
| #include <asm/idle.h> |
| #include <asm/uaccess.h> |
| #include <asm/i387.h> |
| #include <asm/fpu-internal.h> |
| #include <asm/debugreg.h> |
| #include <asm/nmi.h> |
| |
| /* |
| * per-CPU TSS segments. Threads are completely 'soft' on Linux, |
| * no more per-task TSS's. The TSS size is kept cacheline-aligned |
| * so they are allowed to end up in the .data..cacheline_aligned |
| * section. Since TSS's are completely CPU-local, we want them |
| * on exact cacheline boundaries, to eliminate cacheline ping-pong. |
| */ |
| DEFINE_PER_CPU_SHARED_ALIGNED(struct tss_struct, init_tss) = INIT_TSS; |
| |
| #ifdef CONFIG_X86_64 |
| static DEFINE_PER_CPU(unsigned char, is_idle); |
| static ATOMIC_NOTIFIER_HEAD(idle_notifier); |
| |
| void idle_notifier_register(struct notifier_block *n) |
| { |
| atomic_notifier_chain_register(&idle_notifier, n); |
| } |
| EXPORT_SYMBOL_GPL(idle_notifier_register); |
| |
| void idle_notifier_unregister(struct notifier_block *n) |
| { |
| atomic_notifier_chain_unregister(&idle_notifier, n); |
| } |
| EXPORT_SYMBOL_GPL(idle_notifier_unregister); |
| #endif |
| |
| struct kmem_cache *task_xstate_cachep; |
| EXPORT_SYMBOL_GPL(task_xstate_cachep); |
| |
| /* |
| * this gets called so that we can store lazy state into memory and copy the |
| * current task into the new thread. |
| */ |
| int arch_dup_task_struct(struct task_struct *dst, struct task_struct *src) |
| { |
| int ret; |
| |
| *dst = *src; |
| if (fpu_allocated(&src->thread.fpu)) { |
| memset(&dst->thread.fpu, 0, sizeof(dst->thread.fpu)); |
| ret = fpu_alloc(&dst->thread.fpu); |
| if (ret) |
| return ret; |
| fpu_copy(dst, src); |
| } |
| return 0; |
| } |
| |
| void free_thread_xstate(struct task_struct *tsk) |
| { |
| fpu_free(&tsk->thread.fpu); |
| } |
| |
| void arch_release_task_struct(struct task_struct *tsk) |
| { |
| free_thread_xstate(tsk); |
| } |
| |
| void arch_task_cache_init(void) |
| { |
| task_xstate_cachep = |
| kmem_cache_create("task_xstate", xstate_size, |
| __alignof__(union thread_xstate), |
| SLAB_PANIC | SLAB_NOTRACK, NULL); |
| } |
| |
| /* |
| * Free current thread data structures etc.. |
| */ |
| void exit_thread(void) |
| { |
| struct task_struct *me = current; |
| struct thread_struct *t = &me->thread; |
| unsigned long *bp = t->io_bitmap_ptr; |
| |
| if (bp) { |
| struct tss_struct *tss = &per_cpu(init_tss, get_cpu()); |
| |
| t->io_bitmap_ptr = NULL; |
| clear_thread_flag(TIF_IO_BITMAP); |
| /* |
| * Careful, clear this in the TSS too: |
| */ |
| memset(tss->io_bitmap, 0xff, t->io_bitmap_max); |
| t->io_bitmap_max = 0; |
| put_cpu(); |
| kfree(bp); |
| } |
| |
| drop_fpu(me); |
| } |
| |
| void show_regs_common(void) |
| { |
| const char *vendor, *product, *board; |
| |
| vendor = dmi_get_system_info(DMI_SYS_VENDOR); |
| if (!vendor) |
| vendor = ""; |
| product = dmi_get_system_info(DMI_PRODUCT_NAME); |
| if (!product) |
| product = ""; |
| |
| /* Board Name is optional */ |
| board = dmi_get_system_info(DMI_BOARD_NAME); |
| |
| printk(KERN_DEFAULT "Pid: %d, comm: %.20s %s %s %.*s %s %s%s%s\n", |
| current->pid, current->comm, print_tainted(), |
| init_utsname()->release, |
| (int)strcspn(init_utsname()->version, " "), |
| init_utsname()->version, |
| vendor, product, |
| board ? "/" : "", |
| board ? board : ""); |
| } |
| |
| void flush_thread(void) |
| { |
| struct task_struct *tsk = current; |
| |
| flush_ptrace_hw_breakpoint(tsk); |
| memset(tsk->thread.tls_array, 0, sizeof(tsk->thread.tls_array)); |
| drop_init_fpu(tsk); |
| /* |
| * Free the FPU state for non xsave platforms. They get reallocated |
| * lazily at the first use. |
| */ |
| if (!use_eager_fpu()) |
| free_thread_xstate(tsk); |
| } |
| |
| static void hard_disable_TSC(void) |
| { |
| write_cr4(read_cr4() | X86_CR4_TSD); |
| } |
| |
| void disable_TSC(void) |
| { |
| preempt_disable(); |
| if (!test_and_set_thread_flag(TIF_NOTSC)) |
| /* |
| * Must flip the CPU state synchronously with |
| * TIF_NOTSC in the current running context. |
| */ |
| hard_disable_TSC(); |
| preempt_enable(); |
| } |
| |
| static void hard_enable_TSC(void) |
| { |
| write_cr4(read_cr4() & ~X86_CR4_TSD); |
| } |
| |
| static void enable_TSC(void) |
| { |
| preempt_disable(); |
| if (test_and_clear_thread_flag(TIF_NOTSC)) |
| /* |
| * Must flip the CPU state synchronously with |
| * TIF_NOTSC in the current running context. |
| */ |
| hard_enable_TSC(); |
| preempt_enable(); |
| } |
| |
| int get_tsc_mode(unsigned long adr) |
| { |
| unsigned int val; |
| |
| if (test_thread_flag(TIF_NOTSC)) |
| val = PR_TSC_SIGSEGV; |
| else |
| val = PR_TSC_ENABLE; |
| |
| return put_user(val, (unsigned int __user *)adr); |
| } |
| |
| int set_tsc_mode(unsigned int val) |
| { |
| if (val == PR_TSC_SIGSEGV) |
| disable_TSC(); |
| else if (val == PR_TSC_ENABLE) |
| enable_TSC(); |
| else |
| return -EINVAL; |
| |
| return 0; |
| } |
| |
| void __switch_to_xtra(struct task_struct *prev_p, struct task_struct *next_p, |
| struct tss_struct *tss) |
| { |
| struct thread_struct *prev, *next; |
| |
| prev = &prev_p->thread; |
| next = &next_p->thread; |
| |
| if (test_tsk_thread_flag(prev_p, TIF_BLOCKSTEP) ^ |
| test_tsk_thread_flag(next_p, TIF_BLOCKSTEP)) { |
| unsigned long debugctl = get_debugctlmsr(); |
| |
| debugctl &= ~DEBUGCTLMSR_BTF; |
| if (test_tsk_thread_flag(next_p, TIF_BLOCKSTEP)) |
| debugctl |= DEBUGCTLMSR_BTF; |
| |
| update_debugctlmsr(debugctl); |
| } |
| |
| if (test_tsk_thread_flag(prev_p, TIF_NOTSC) ^ |
| test_tsk_thread_flag(next_p, TIF_NOTSC)) { |
| /* prev and next are different */ |
| if (test_tsk_thread_flag(next_p, TIF_NOTSC)) |
| hard_disable_TSC(); |
| else |
| hard_enable_TSC(); |
| } |
| |
| if (test_tsk_thread_flag(next_p, TIF_IO_BITMAP)) { |
| /* |
| * Copy the relevant range of the IO bitmap. |
| * Normally this is 128 bytes or less: |
| */ |
| memcpy(tss->io_bitmap, next->io_bitmap_ptr, |
| max(prev->io_bitmap_max, next->io_bitmap_max)); |
| } else if (test_tsk_thread_flag(prev_p, TIF_IO_BITMAP)) { |
| /* |
| * Clear any possible leftover bits: |
| */ |
| memset(tss->io_bitmap, 0xff, prev->io_bitmap_max); |
| } |
| propagate_user_return_notify(prev_p, next_p); |
| } |
| |
| /* |
| * Idle related variables and functions |
| */ |
| unsigned long boot_option_idle_override = IDLE_NO_OVERRIDE; |
| EXPORT_SYMBOL(boot_option_idle_override); |
| |
| static void (*x86_idle)(void); |
| |
| #ifndef CONFIG_SMP |
| static inline void play_dead(void) |
| { |
| BUG(); |
| } |
| #endif |
| |
| #ifdef CONFIG_X86_64 |
| void enter_idle(void) |
| { |
| this_cpu_write(is_idle, 1); |
| atomic_notifier_call_chain(&idle_notifier, IDLE_START, NULL); |
| } |
| |
| static void __exit_idle(void) |
| { |
| if (x86_test_and_clear_bit_percpu(0, is_idle) == 0) |
| return; |
| atomic_notifier_call_chain(&idle_notifier, IDLE_END, NULL); |
| } |
| |
| /* Called from interrupts to signify idle end */ |
| void exit_idle(void) |
| { |
| /* idle loop has pid 0 */ |
| if (current->pid) |
| return; |
| __exit_idle(); |
| } |
| #endif |
| |
| /* |
| * The idle thread. There's no useful work to be |
| * done, so just try to conserve power and have a |
| * low exit latency (ie sit in a loop waiting for |
| * somebody to say that they'd like to reschedule) |
| */ |
| void cpu_idle(void) |
| { |
| /* |
| * If we're the non-boot CPU, nothing set the stack canary up |
| * for us. CPU0 already has it initialized but no harm in |
| * doing it again. This is a good place for updating it, as |
| * we wont ever return from this function (so the invalid |
| * canaries already on the stack wont ever trigger). |
| */ |
| boot_init_stack_canary(); |
| current_thread_info()->status |= TS_POLLING; |
| |
| while (1) { |
| tick_nohz_idle_enter(); |
| |
| while (!need_resched()) { |
| rmb(); |
| |
| if (cpu_is_offline(smp_processor_id())) |
| play_dead(); |
| |
| /* |
| * Idle routines should keep interrupts disabled |
| * from here on, until they go to idle. |
| * Otherwise, idle callbacks can misfire. |
| */ |
| local_touch_nmi(); |
| local_irq_disable(); |
| |
| enter_idle(); |
| |
| /* Don't trace irqs off for idle */ |
| stop_critical_timings(); |
| |
| /* enter_idle() needs rcu for notifiers */ |
| rcu_idle_enter(); |
| |
| if (cpuidle_idle_call()) |
| x86_idle(); |
| |
| rcu_idle_exit(); |
| start_critical_timings(); |
| |
| /* In many cases the interrupt that ended idle |
| has already called exit_idle. But some idle |
| loops can be woken up without interrupt. */ |
| __exit_idle(); |
| } |
| |
| tick_nohz_idle_exit(); |
| preempt_enable_no_resched(); |
| schedule(); |
| preempt_disable(); |
| } |
| } |
| |
| /* |
| * We use this if we don't have any better |
| * idle routine.. |
| */ |
| void default_idle(void) |
| { |
| trace_cpu_idle_rcuidle(1, smp_processor_id()); |
| current_thread_info()->status &= ~TS_POLLING; |
| /* |
| * TS_POLLING-cleared state must be visible before we |
| * test NEED_RESCHED: |
| */ |
| smp_mb(); |
| |
| if (!need_resched()) |
| safe_halt(); /* enables interrupts racelessly */ |
| else |
| local_irq_enable(); |
| current_thread_info()->status |= TS_POLLING; |
| trace_cpu_idle_rcuidle(PWR_EVENT_EXIT, smp_processor_id()); |
| } |
| #ifdef CONFIG_APM_MODULE |
| EXPORT_SYMBOL(default_idle); |
| #endif |
| |
| #ifdef CONFIG_XEN |
| bool xen_set_default_idle(void) |
| { |
| bool ret = !!x86_idle; |
| |
| x86_idle = default_idle; |
| |
| return ret; |
| } |
| #endif |
| void stop_this_cpu(void *dummy) |
| { |
| local_irq_disable(); |
| /* |
| * Remove this CPU: |
| */ |
| set_cpu_online(smp_processor_id(), false); |
| disable_local_APIC(); |
| |
| for (;;) |
| halt(); |
| } |
| |
| /* |
| * On SMP it's slightly faster (but much more power-consuming!) |
| * to poll the ->work.need_resched flag instead of waiting for the |
| * cross-CPU IPI to arrive. Use this option with caution. |
| */ |
| static void poll_idle(void) |
| { |
| trace_cpu_idle_rcuidle(0, smp_processor_id()); |
| local_irq_enable(); |
| while (!need_resched()) |
| cpu_relax(); |
| trace_cpu_idle_rcuidle(PWR_EVENT_EXIT, smp_processor_id()); |
| } |
| |
| bool amd_e400_c1e_detected; |
| EXPORT_SYMBOL(amd_e400_c1e_detected); |
| |
| static cpumask_var_t amd_e400_c1e_mask; |
| |
| void amd_e400_remove_cpu(int cpu) |
| { |
| if (amd_e400_c1e_mask != NULL) |
| cpumask_clear_cpu(cpu, amd_e400_c1e_mask); |
| } |
| |
| /* |
| * AMD Erratum 400 aware idle routine. We check for C1E active in the interrupt |
| * pending message MSR. If we detect C1E, then we handle it the same |
| * way as C3 power states (local apic timer and TSC stop) |
| */ |
| static void amd_e400_idle(void) |
| { |
| if (need_resched()) |
| return; |
| |
| if (!amd_e400_c1e_detected) { |
| u32 lo, hi; |
| |
| rdmsr(MSR_K8_INT_PENDING_MSG, lo, hi); |
| |
| if (lo & K8_INTP_C1E_ACTIVE_MASK) { |
| amd_e400_c1e_detected = true; |
| if (!boot_cpu_has(X86_FEATURE_NONSTOP_TSC)) |
| mark_tsc_unstable("TSC halt in AMD C1E"); |
| pr_info("System has AMD C1E enabled\n"); |
| } |
| } |
| |
| if (amd_e400_c1e_detected) { |
| int cpu = smp_processor_id(); |
| |
| if (!cpumask_test_cpu(cpu, amd_e400_c1e_mask)) { |
| cpumask_set_cpu(cpu, amd_e400_c1e_mask); |
| /* |
| * Force broadcast so ACPI can not interfere. |
| */ |
| clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_FORCE, |
| &cpu); |
| pr_info("Switch to broadcast mode on CPU%d\n", cpu); |
| } |
| clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_ENTER, &cpu); |
| |
| default_idle(); |
| |
| /* |
| * The switch back from broadcast mode needs to be |
| * called with interrupts disabled. |
| */ |
| local_irq_disable(); |
| clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_EXIT, &cpu); |
| local_irq_enable(); |
| } else |
| default_idle(); |
| } |
| |
| void __cpuinit select_idle_routine(const struct cpuinfo_x86 *c) |
| { |
| #ifdef CONFIG_SMP |
| if (x86_idle == poll_idle && smp_num_siblings > 1) |
| pr_warn_once("WARNING: polling idle and HT enabled, performance may degrade\n"); |
| #endif |
| if (x86_idle) |
| return; |
| |
| if (cpu_has_amd_erratum(amd_erratum_400)) { |
| /* E400: APIC timer interrupt does not wake up CPU from C1e */ |
| pr_info("using AMD E400 aware idle routine\n"); |
| x86_idle = amd_e400_idle; |
| } else |
| x86_idle = default_idle; |
| } |
| |
| void __init init_amd_e400_c1e_mask(void) |
| { |
| /* If we're using amd_e400_idle, we need to allocate amd_e400_c1e_mask. */ |
| if (x86_idle == amd_e400_idle) |
| zalloc_cpumask_var(&amd_e400_c1e_mask, GFP_KERNEL); |
| } |
| |
| static int __init idle_setup(char *str) |
| { |
| if (!str) |
| return -EINVAL; |
| |
| if (!strcmp(str, "poll")) { |
| pr_info("using polling idle threads\n"); |
| x86_idle = poll_idle; |
| boot_option_idle_override = IDLE_POLL; |
| } else if (!strcmp(str, "halt")) { |
| /* |
| * When the boot option of idle=halt is added, halt is |
| * forced to be used for CPU idle. In such case CPU C2/C3 |
| * won't be used again. |
| * To continue to load the CPU idle driver, don't touch |
| * the boot_option_idle_override. |
| */ |
| x86_idle = default_idle; |
| boot_option_idle_override = IDLE_HALT; |
| } else if (!strcmp(str, "nomwait")) { |
| /* |
| * If the boot option of "idle=nomwait" is added, |
| * it means that mwait will be disabled for CPU C2/C3 |
| * states. In such case it won't touch the variable |
| * of boot_option_idle_override. |
| */ |
| boot_option_idle_override = IDLE_NOMWAIT; |
| } else |
| return -1; |
| |
| return 0; |
| } |
| early_param("idle", idle_setup); |
| |
| unsigned long arch_align_stack(unsigned long sp) |
| { |
| if (!(current->personality & ADDR_NO_RANDOMIZE) && randomize_va_space) |
| sp -= get_random_int() % 8192; |
| return sp & ~0xf; |
| } |
| |
| unsigned long arch_randomize_brk(struct mm_struct *mm) |
| { |
| unsigned long range_end = mm->brk + 0x02000000; |
| return randomize_range(mm->brk, range_end, 0) ? : mm->brk; |
| } |
| |