| # |
| # USB Serial device configuration |
| # |
| |
| menuconfig USB_SERIAL |
| tristate "USB Serial Converter support" |
| depends on TTY |
| ---help--- |
| Say Y here if you have a USB device that provides normal serial |
| ports, or acts like a serial device, and you want to connect it to |
| your USB bus. |
| |
| Please read <file:Documentation/usb/usb-serial.txt> for more |
| information on the specifics of the different devices that are |
| supported, and on how to use them. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called usbserial. |
| |
| if USB_SERIAL |
| |
| config USB_SERIAL_CONSOLE |
| bool "USB Serial Console device support" |
| depends on USB_SERIAL=y |
| ---help--- |
| If you say Y here, it will be possible to use a USB to serial |
| converter port as the system console (the system console is the |
| device which receives all kernel messages and warnings and which |
| allows logins in single user mode). This could be useful if some |
| terminal or printer is connected to that serial port. |
| |
| Even if you say Y here, the currently visible virtual console |
| (/dev/tty0) will still be used as the system console by default, but |
| you can alter that using a kernel command line option such as |
| "console=ttyUSB0". (Try "man bootparam" or see the documentation of |
| your boot loader (lilo or loadlin) about how to pass options to the |
| kernel at boot time.) |
| |
| If you don't have a VGA card installed and you say Y here, the |
| kernel will automatically use the first USB to serial converter |
| port, /dev/ttyUSB0, as system console. |
| |
| If unsure, say N. |
| |
| config USB_SERIAL_GENERIC |
| bool "USB Generic Serial Driver" |
| help |
| Say Y here if you want to use the generic USB serial driver. Please |
| read <file:Documentation/usb/usb-serial.txt> for more information on |
| using this driver. It is recommended that the "USB Serial converter |
| support" be compiled as a module for this driver to be used |
| properly. |
| |
| config USB_SERIAL_SIMPLE |
| tristate "USB Serial Simple Driver" |
| help |
| Say Y here to use the USB serial "simple" driver. This driver |
| handles a wide range of very simple devices, all in one |
| driver. Specifically, it supports: |
| - Suunto ANT+ USB device. |
| - Medtronic CareLink USB device |
| - Fundamental Software dongle. |
| - Google USB serial devices |
| - HP4x calculators |
| - a number of Motorola phones |
| - Novatel Wireless GPS receivers |
| - Siemens USB/MPI adapter. |
| - ViVOtech ViVOpay USB device. |
| - Infineon Modem Flashloader USB interface |
| - ZIO Motherboard USB serial interface |
| |
| To compile this driver as a module, choose M here: the module |
| will be called usb-serial-simple. |
| |
| config USB_SERIAL_AIRCABLE |
| tristate "USB AIRcable Bluetooth Dongle Driver" |
| help |
| Say Y here if you want to use USB AIRcable Bluetooth Dongle. |
| |
| To compile this driver as a module, choose M here: the module |
| will be called aircable. |
| |
| config USB_SERIAL_ARK3116 |
| tristate "USB ARK Micro 3116 USB Serial Driver" |
| help |
| Say Y here if you want to use a ARK Micro 3116 USB to Serial |
| device. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called ark3116 |
| |
| config USB_SERIAL_BELKIN |
| tristate "USB Belkin and Peracom Single Port Serial Driver" |
| help |
| Say Y here if you want to use a Belkin USB Serial single port |
| adaptor (F5U103 is one of the model numbers) or the Peracom single |
| port USB to serial adapter. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called belkin_sa. |
| |
| config USB_SERIAL_CH341 |
| tristate "USB Winchiphead CH341 Single Port Serial Driver" |
| help |
| Say Y here if you want to use a Winchiphead CH341 single port |
| USB to serial adapter. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called ch341. |
| |
| config USB_SERIAL_WHITEHEAT |
| tristate "USB ConnectTech WhiteHEAT Serial Driver" |
| select USB_EZUSB_FX2 |
| help |
| Say Y here if you want to use a ConnectTech WhiteHEAT 4 port |
| USB to serial converter device. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called whiteheat. |
| |
| config USB_SERIAL_DIGI_ACCELEPORT |
| tristate "USB Digi International AccelePort USB Serial Driver" |
| ---help--- |
| Say Y here if you want to use Digi AccelePort USB 2 or 4 devices, |
| 2 port (plus parallel port) and 4 port USB serial converters. The |
| parallel port on the USB 2 appears as a third serial port on Linux. |
| The Digi Acceleport USB 8 is not yet supported by this driver. |
| |
| This driver works under SMP with the usb-uhci driver. It does not |
| work under SMP with the uhci driver. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called digi_acceleport. |
| |
| config USB_SERIAL_CP210X |
| tristate "USB CP210x family of UART Bridge Controllers" |
| help |
| Say Y here if you want to use a CP2101/CP2102/CP2103 based USB |
| to RS232 converters. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called cp210x. |
| |
| config USB_SERIAL_CYPRESS_M8 |
| tristate "USB Cypress M8 USB Serial Driver" |
| help |
| Say Y here if you want to use a device that contains the Cypress |
| USB to Serial microcontroller, such as the DeLorme Earthmate GPS. |
| |
| Attempted SMP support... send bug reports! |
| |
| Supported microcontrollers in the CY4601 family are: |
| CY7C63741 CY7C63742 CY7C63743 CY7C64013 |
| |
| To compile this driver as a module, choose M here: the |
| module will be called cypress_m8. |
| |
| config USB_SERIAL_EMPEG |
| tristate "USB Empeg empeg-car Mark I/II Driver" |
| help |
| Say Y here if you want to connect to your Empeg empeg-car Mark I/II |
| mp3 player via USB. The driver uses a single ttyUSB{0,1,2,...} |
| device node. See <file:Documentation/usb/usb-serial.txt> for more |
| tidbits of information. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called empeg. |
| |
| config USB_SERIAL_FTDI_SIO |
| tristate "USB FTDI Single Port Serial Driver" |
| ---help--- |
| Say Y here if you want to use a FTDI SIO single port USB to serial |
| converter device. The implementation I have is called the USC-1000. |
| This driver has also been tested with the 245 and 232 devices. |
| |
| See <http://ftdi-usb-sio.sourceforge.net/> for more |
| information on this driver and the device. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called ftdi_sio. |
| |
| config USB_SERIAL_VISOR |
| tristate "USB Handspring Visor / Palm m50x / Sony Clie Driver" |
| help |
| Say Y here if you want to connect to your HandSpring Visor, Palm |
| m500 or m505 through its USB docking station. See |
| <http://usbvisor.sourceforge.net/index.php3> for more information on using this |
| driver. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called visor. |
| |
| config USB_SERIAL_IPAQ |
| tristate "USB PocketPC PDA Driver" |
| help |
| Say Y here if you want to connect to your Compaq iPAQ, HP Jornada |
| or any other PDA running Windows CE 3.0 or PocketPC 2002 |
| using a USB cradle/cable. For information on using the driver, |
| read <file:Documentation/usb/usb-serial.txt>. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called ipaq. |
| |
| config USB_SERIAL_IR |
| tristate "USB IR Dongle Serial Driver" |
| help |
| Say Y here if you want to enable simple serial support for USB IrDA |
| devices. This is useful if you do not want to use the full IrDA |
| stack. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called ir-usb. |
| |
| config USB_SERIAL_EDGEPORT |
| tristate "USB Inside Out Edgeport Serial Driver" |
| ---help--- |
| Say Y here if you want to use any of the following devices from |
| Inside Out Networks (Digi): |
| Edgeport/4 |
| Rapidport/4 |
| Edgeport/4t |
| Edgeport/2 |
| Edgeport/4i |
| Edgeport/2i |
| Edgeport/421 |
| Edgeport/21 |
| Edgeport/8 |
| Edgeport/8 Dual |
| Edgeport/2D8 |
| Edgeport/4D8 |
| Edgeport/8i |
| Edgeport/2 DIN |
| Edgeport/4 DIN |
| Edgeport/16 Dual |
| |
| To compile this driver as a module, choose M here: the |
| module will be called io_edgeport. |
| |
| config USB_SERIAL_EDGEPORT_TI |
| tristate "USB Inside Out Edgeport Serial Driver (TI devices)" |
| help |
| Say Y here if you want to use any of the devices from Inside Out |
| Networks (Digi) that are not supported by the io_edgeport driver. |
| This includes the Edgeport/1 device. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called io_ti. |
| |
| config USB_SERIAL_F81232 |
| tristate "USB Fintek F81232 Single Port Serial Driver" |
| help |
| Say Y here if you want to use the Fintek F81232 single |
| port usb to serial adapter. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called f81232. |
| |
| config USB_SERIAL_GARMIN |
| tristate "USB Garmin GPS driver" |
| help |
| Say Y here if you want to connect to your Garmin GPS. |
| Should work with most Garmin GPS devices which have a native USB port. |
| |
| See <http://sourceforge.net/projects/garmin-gps> for the latest |
| version of the driver. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called garmin_gps. |
| |
| config USB_SERIAL_IPW |
| tristate "USB IPWireless (3G UMTS TDD) Driver" |
| select USB_SERIAL_WWAN |
| help |
| Say Y here if you want to use a IPWireless USB modem such as |
| the ones supplied by Axity3G/Sentech South Africa. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called ipw. |
| |
| config USB_SERIAL_IUU |
| tristate "USB Infinity USB Unlimited Phoenix Driver" |
| help |
| Say Y here if you want to use a IUU in phoenix mode and get |
| an extra ttyUSBx device. More information available on |
| http://eczema.ecze.com/iuu_phoenix.html |
| |
| To compile this driver as a module, choose M here: the |
| module will be called iuu_phoenix.o |
| |
| config USB_SERIAL_KEYSPAN_PDA |
| tristate "USB Keyspan PDA Single Port Serial Driver" |
| select USB_EZUSB_FX2 |
| help |
| Say Y here if you want to use a Keyspan PDA single port USB to |
| serial converter device. This driver makes use of firmware |
| developed from scratch by Brian Warner. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called keyspan_pda. |
| |
| config USB_SERIAL_KEYSPAN |
| tristate "USB Keyspan USA-xxx Serial Driver" |
| select USB_EZUSB_FX2 |
| ---help--- |
| Say Y here if you want to use Keyspan USB to serial converter |
| devices. This driver makes use of Keyspan's official firmware |
| and was developed with their support. You must also include |
| firmware to support your particular device(s). |
| |
| See <http://blemings.org/hugh/keyspan.html> for more information. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called keyspan. |
| |
| config USB_SERIAL_KEYSPAN_MPR |
| bool "USB Keyspan MPR Firmware" |
| depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL |
| help |
| Say Y here to include firmware for the Keyspan MPR converter. |
| |
| config USB_SERIAL_KEYSPAN_USA28 |
| bool "USB Keyspan USA-28 Firmware" |
| depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL |
| help |
| Say Y here to include firmware for the USA-28 converter. |
| |
| config USB_SERIAL_KEYSPAN_USA28X |
| bool "USB Keyspan USA-28X Firmware" |
| depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL |
| help |
| Say Y here to include firmware for the USA-28X converter. |
| Be sure you have a USA-28X, there are also 28XA and 28XB |
| models, the label underneath has the actual part number. |
| |
| config USB_SERIAL_KEYSPAN_USA28XA |
| bool "USB Keyspan USA-28XA Firmware" |
| depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL |
| help |
| Say Y here to include firmware for the USA-28XA converter. |
| Be sure you have a USA-28XA, there are also 28X and 28XB |
| models, the label underneath has the actual part number. |
| |
| config USB_SERIAL_KEYSPAN_USA28XB |
| bool "USB Keyspan USA-28XB Firmware" |
| depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL |
| help |
| Say Y here to include firmware for the USA-28XB converter. |
| Be sure you have a USA-28XB, there are also 28X and 28XA |
| models, the label underneath has the actual part number. |
| |
| config USB_SERIAL_KEYSPAN_USA19 |
| bool "USB Keyspan USA-19 Firmware" |
| depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL |
| help |
| Say Y here to include firmware for the USA-19 converter. |
| |
| config USB_SERIAL_KEYSPAN_USA18X |
| bool "USB Keyspan USA-18X Firmware" |
| depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL |
| help |
| Say Y here to include firmware for the USA-18X converter. |
| |
| config USB_SERIAL_KEYSPAN_USA19W |
| bool "USB Keyspan USA-19W Firmware" |
| depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL |
| help |
| Say Y here to include firmware for the USA-19W converter. |
| |
| config USB_SERIAL_KEYSPAN_USA19QW |
| bool "USB Keyspan USA-19QW Firmware" |
| depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL |
| help |
| Say Y here to include firmware for the USA-19QW converter. |
| |
| config USB_SERIAL_KEYSPAN_USA19QI |
| bool "USB Keyspan USA-19QI Firmware" |
| depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL |
| help |
| Say Y here to include firmware for the USA-19QI converter. |
| |
| config USB_SERIAL_KEYSPAN_USA49W |
| bool "USB Keyspan USA-49W Firmware" |
| depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL |
| help |
| Say Y here to include firmware for the USA-49W converter. |
| |
| config USB_SERIAL_KEYSPAN_USA49WLC |
| bool "USB Keyspan USA-49WLC Firmware" |
| depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL |
| help |
| Say Y here to include firmware for the USA-49WLC converter. |
| |
| config USB_SERIAL_KLSI |
| tristate "USB KL5KUSB105 (Palmconnect) Driver" |
| ---help--- |
| Say Y here if you want to use a KL5KUSB105 - based single port |
| serial adapter. The most widely known -- and currently the only |
| tested -- device in this category is the PalmConnect USB Serial |
| adapter sold by Palm Inc. for use with their Palm III and Palm V |
| series PDAs. |
| |
| Please read <file:Documentation/usb/usb-serial.txt> for more |
| information. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called kl5kusb105. |
| |
| config USB_SERIAL_KOBIL_SCT |
| tristate "USB KOBIL chipcard reader" |
| ---help--- |
| Say Y here if you want to use one of the following KOBIL USB chipcard |
| readers: |
| |
| - USB TWIN |
| - KAAN Standard Plus |
| - KAAN SIM |
| - SecOVID Reader Plus |
| - B1 Professional |
| - KAAN Professional |
| |
| Note that you need a current CT-API. |
| To compile this driver as a module, choose M here: the |
| module will be called kobil_sct. |
| |
| config USB_SERIAL_MCT_U232 |
| tristate "USB MCT Single Port Serial Driver" |
| ---help--- |
| Say Y here if you want to use a USB Serial single port adapter from |
| Magic Control Technology Corp. (U232 is one of the model numbers). |
| |
| This driver also works with Sitecom U232-P25 and D-Link DU-H3SP USB |
| BAY, Belkin F5U109, and Belkin F5U409 devices. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called mct_u232. |
| |
| config USB_SERIAL_METRO |
| tristate "USB Metrologic Instruments USB-POS Barcode Scanner Driver" |
| ---help--- |
| Say Y here if you want to use a USB POS Metrologic barcode scanner. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called metro-usb. |
| |
| config USB_SERIAL_MOS7720 |
| tristate "USB Moschip 7720 Serial Driver" |
| ---help--- |
| Say Y here if you want to use USB Serial single and double |
| port adapters from Moschip Semiconductor Tech. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called mos7720. |
| |
| config USB_SERIAL_MOS7715_PARPORT |
| bool "Support for parallel port on the Moschip 7715" |
| depends on USB_SERIAL_MOS7720 |
| depends on PARPORT=y || PARPORT=USB_SERIAL_MOS7720 |
| select PARPORT_NOT_PC |
| ---help--- |
| Say Y if you have a Moschip 7715 device and would like to use |
| the parallel port it provides. The port will register with |
| the parport subsystem as a low-level driver. |
| |
| config USB_SERIAL_MOS7840 |
| tristate "USB Moschip 7840/7820 USB Serial Driver" |
| ---help--- |
| Say Y here if you want to use a MCS7840 Quad-Serial or MCS7820 |
| Dual-Serial port device from MosChip Semiconductor. |
| |
| The MCS7840 and MCS7820 have been developed to connect a wide range |
| of standard serial devices to a USB host. The MCS7840 has a USB |
| device controller connected to four (4) individual UARTs while the |
| MCS7820 controller connects to two (2) individual UARTs. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called mos7840. If unsure, choose N. |
| |
| config USB_SERIAL_MXUPORT11 |
| tristate "USB Moxa UPORT 11x0 Serial Driver" |
| ---help--- |
| Say Y here if you want to use a MOXA UPort 11x0 Serial hub. |
| |
| This driver supports: |
| |
| - UPort 1110 : 1 port RS-232 USB to Serial Hub. |
| - UPort 1130 : 1 port RS-422/485 USB to Serial Hub. |
| - UPort 1130I : 1 port RS-422/485 USB to Serial Hub with Isolation. |
| - UPort 1150 : 1 port RS-232/422/485 USB to Serial Hub. |
| - UPort 1150I : 1 port RS-232/422/485 USB to Serial Hub with Isolation. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called mxu11x0. |
| |
| config USB_SERIAL_MXUPORT |
| tristate "USB Moxa UPORT Serial Driver" |
| ---help--- |
| Say Y here if you want to use a MOXA UPort Serial hub. |
| |
| This driver supports: |
| |
| [2 Port] |
| - UPort 1250 : 2 Port RS-232/422/485 USB to Serial Hub |
| - UPort 1250I : 2 Port RS-232/422/485 USB to Serial Hub with |
| Isolation |
| |
| [4 Port] |
| - UPort 1410 : 4 Port RS-232 USB to Serial Hub |
| - UPort 1450 : 4 Port RS-232/422/485 USB to Serial Hub |
| - UPort 1450I : 4 Port RS-232/422/485 USB to Serial Hub with |
| Isolation |
| |
| [8 Port] |
| - UPort 1610-8 : 8 Port RS-232 USB to Serial Hub |
| - UPort 1650-8 : 8 Port RS-232/422/485 USB to Serial Hub |
| |
| [16 Port] |
| - UPort 1610-16 : 16 Port RS-232 USB to Serial Hub |
| - UPort 1650-16 : 16 Port RS-232/422/485 USB to Serial Hub |
| |
| To compile this driver as a module, choose M here: the |
| module will be called mxuport. |
| |
| config USB_SERIAL_NAVMAN |
| tristate "USB Navman GPS device" |
| help |
| To compile this driver as a module, choose M here: the |
| module will be called navman. |
| |
| config USB_SERIAL_PL2303 |
| tristate "USB Prolific 2303 Single Port Serial Driver" |
| help |
| Say Y here if you want to use the PL2303 USB Serial single port |
| adapter from Prolific. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called pl2303. |
| |
| config USB_SERIAL_OTI6858 |
| tristate "USB Ours Technology Inc. OTi-6858 USB To RS232 Bridge Controller" |
| help |
| Say Y here if you want to use the OTi-6858 single port USB to serial |
| converter device. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called oti6858. |
| |
| config USB_SERIAL_QCAUX |
| tristate "USB Qualcomm Auxiliary Serial Port Driver" |
| help |
| Say Y here if you want to use the auxiliary serial ports provided |
| by many modems based on Qualcomm chipsets. These ports often use |
| a proprietary protocol called DM and cannot be used for AT- or |
| PPP-based communication. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called qcaux. If unsure, choose N. |
| |
| config USB_SERIAL_QUALCOMM |
| tristate "USB Qualcomm Serial modem" |
| select USB_SERIAL_WWAN |
| help |
| Say Y here if you have a Qualcomm USB modem device. These are |
| usually wireless cellular modems. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called qcserial. |
| |
| config USB_SERIAL_SPCP8X5 |
| tristate "USB SPCP8x5 USB To Serial Driver" |
| help |
| Say Y here if you want to use the spcp8x5 converter chip. This is |
| commonly found in some Z-Wave USB devices. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called spcp8x5. |
| |
| config USB_SERIAL_SAFE |
| tristate "USB Safe Serial (Encapsulated) Driver" |
| |
| config USB_SERIAL_SAFE_PADDED |
| bool "USB Secure Encapsulated Driver - Padded" |
| depends on USB_SERIAL_SAFE |
| |
| config USB_SERIAL_SIERRAWIRELESS |
| tristate "USB Sierra Wireless Driver" |
| help |
| Say M here if you want to use Sierra Wireless devices. |
| |
| Many devices have a feature known as TRU-Install. For those devices |
| to work properly, the USB Storage Sierra feature must be enabled. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called sierra. |
| |
| config USB_SERIAL_SYMBOL |
| tristate "USB Symbol Barcode driver (serial mode)" |
| help |
| Say Y here if you want to use a Symbol USB Barcode device |
| in serial emulation mode. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called symbolserial. |
| |
| config USB_SERIAL_TI |
| tristate "USB TI 3410/5052 Serial Driver" |
| help |
| Say Y here if you want to use the TI USB 3410 or 5052 |
| serial devices. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called ti_usb_3410_5052. |
| |
| config USB_SERIAL_CYBERJACK |
| tristate "USB REINER SCT cyberJack pinpad/e-com chipcard reader" |
| ---help--- |
| Say Y here if you want to use a cyberJack pinpad/e-com USB chipcard |
| reader. This is an interface to ISO 7816 compatible contact-based |
| chipcards, e.g. GSM SIMs. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called cyberjack. |
| |
| If unsure, say N. |
| |
| config USB_SERIAL_XIRCOM |
| tristate "USB Xircom / Entrega Single Port Serial Driver" |
| select USB_EZUSB_FX2 |
| help |
| Say Y here if you want to use a Xircom or Entrega single port USB to |
| serial converter device. This driver makes use of firmware |
| developed from scratch by Brian Warner. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called keyspan_pda. |
| |
| config USB_SERIAL_WWAN |
| tristate |
| |
| config USB_SERIAL_OPTION |
| tristate "USB driver for GSM and CDMA modems" |
| select USB_SERIAL_WWAN |
| help |
| Say Y here if you have a GSM or CDMA modem that's connected to USB. |
| |
| This driver also supports several PCMCIA cards which have a |
| built-in OHCI-USB adapter and an internally-connected GSM modem. |
| The USB bus on these cards is not accessible externally. |
| |
| Supported devices include (some of?) those made by: |
| Option, Huawei, Audiovox, Novatel Wireless, or Anydata. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called option. |
| |
| If this driver doesn't recognize your device, |
| it might be accessible via the FTDI_SIO driver. |
| |
| config USB_SERIAL_OMNINET |
| tristate "USB ZyXEL omni.net LCD Plus Driver" |
| help |
| Say Y here if you want to use a ZyXEL omni.net LCD ISDN TA. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called omninet. |
| |
| config USB_SERIAL_OPTICON |
| tristate "USB Opticon Barcode driver (serial mode)" |
| help |
| Say Y here if you want to use a Opticon USB Barcode device |
| in serial emulation mode. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called opticon. |
| |
| config USB_SERIAL_XSENS_MT |
| tristate "Xsens motion tracker serial interface driver" |
| help |
| Say Y here if you want to use Xsens motion trackers. |
| |
| This driver supports the new generation of motion trackers |
| by Xsens. Older devices can be accessed using the FTDI_SIO |
| driver. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called xsens_mt. |
| |
| config USB_SERIAL_WISHBONE |
| tristate "USB-Wishbone adapter interface driver" |
| help |
| Say Y here if you want to use a USB attached Wishbone bus. |
| |
| Wishbone is an open hardware SoC bus commonly used in FPGA |
| designs. Bus access can be serialized using the Etherbone |
| protocol <http://www.ohwr.org/projects/etherbone-core>. |
| |
| This driver is intended to be used with devices which attach |
| their internal Wishbone bus to a USB serial interface using |
| the Etherbone protocol. A userspace library is required to |
| speak the protocol made available by this driver as ttyUSBx. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called wishbone-serial. |
| |
| config USB_SERIAL_SSU100 |
| tristate "USB Quatech SSU-100 Single Port Serial Driver" |
| help |
| Say Y here if you want to use the Quatech SSU-100 single |
| port usb to serial adapter. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called ssu100. |
| |
| config USB_SERIAL_QT2 |
| tristate "USB Quatech Serial Driver for USB 2 devices" |
| help |
| Say Y here if you want to use the Quatech USB 2 |
| serial adapters. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called quatech-serial. |
| |
| config USB_SERIAL_DEBUG |
| tristate "USB Debugging Device" |
| help |
| Say Y here if you have a USB debugging device used to receive |
| debugging data from another machine. The most common of these |
| devices is the NetChip TurboCONNECT device. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called usb-debug. |
| |
| endif # USB_SERIAL |