| /* |
| * Common code for mac80211 Prism54 drivers |
| * |
| * Copyright (c) 2006, Michael Wu <flamingice@sourmilk.net> |
| * Copyright (c) 2007-2009, Christian Lamparter <chunkeey@web.de> |
| * Copyright 2008, Johannes Berg <johannes@sipsolutions.net> |
| * |
| * Based on: |
| * - the islsm (softmac prism54) driver, which is: |
| * Copyright 2004-2006 Jean-Baptiste Note <jbnote@gmail.com>, et al. |
| * - stlc45xx driver |
| * Copyright (C) 2008 Nokia Corporation and/or its subsidiary(-ies). |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| */ |
| |
| #include <linux/init.h> |
| #include <linux/firmware.h> |
| #include <linux/etherdevice.h> |
| |
| #include <net/mac80211.h> |
| |
| #include "p54.h" |
| #include "lmac.h" |
| |
| #ifdef P54_MM_DEBUG |
| static void p54_dump_tx_queue(struct p54_common *priv) |
| { |
| unsigned long flags; |
| struct ieee80211_tx_info *info; |
| struct p54_tx_info *range; |
| struct sk_buff *skb; |
| struct p54_hdr *hdr; |
| unsigned int i = 0; |
| u32 prev_addr; |
| u32 largest_hole = 0, free; |
| |
| spin_lock_irqsave(&priv->tx_queue.lock, flags); |
| wiphy_debug(priv->hw->wiphy, "/ --- tx queue dump (%d entries) ---\n", |
| skb_queue_len(&priv->tx_queue)); |
| |
| prev_addr = priv->rx_start; |
| skb_queue_walk(&priv->tx_queue, skb) { |
| info = IEEE80211_SKB_CB(skb); |
| range = (void *) info->rate_driver_data; |
| hdr = (void *) skb->data; |
| |
| free = range->start_addr - prev_addr; |
| wiphy_debug(priv->hw->wiphy, |
| "| [%02d] => [skb:%p skb_len:0x%04x " |
| "hdr:{flags:%02x len:%04x req_id:%04x type:%02x} " |
| "mem:{start:%04x end:%04x, free:%d}]\n", |
| i++, skb, skb->len, |
| le16_to_cpu(hdr->flags), le16_to_cpu(hdr->len), |
| le32_to_cpu(hdr->req_id), le16_to_cpu(hdr->type), |
| range->start_addr, range->end_addr, free); |
| |
| prev_addr = range->end_addr; |
| largest_hole = max(largest_hole, free); |
| } |
| free = priv->rx_end - prev_addr; |
| largest_hole = max(largest_hole, free); |
| wiphy_debug(priv->hw->wiphy, |
| "\\ --- [free: %d], largest free block: %d ---\n", |
| free, largest_hole); |
| spin_unlock_irqrestore(&priv->tx_queue.lock, flags); |
| } |
| #endif /* P54_MM_DEBUG */ |
| |
| /* |
| * So, the firmware is somewhat stupid and doesn't know what places in its |
| * memory incoming data should go to. By poking around in the firmware, we |
| * can find some unused memory to upload our packets to. However, data that we |
| * want the card to TX needs to stay intact until the card has told us that |
| * it is done with it. This function finds empty places we can upload to and |
| * marks allocated areas as reserved if necessary. p54_find_and_unlink_skb or |
| * p54_free_skb frees allocated areas. |
| */ |
| static int p54_assign_address(struct p54_common *priv, struct sk_buff *skb) |
| { |
| struct sk_buff *entry, *target_skb = NULL; |
| struct ieee80211_tx_info *info; |
| struct p54_tx_info *range; |
| struct p54_hdr *data = (void *) skb->data; |
| unsigned long flags; |
| u32 last_addr = priv->rx_start; |
| u32 target_addr = priv->rx_start; |
| u16 len = priv->headroom + skb->len + priv->tailroom + 3; |
| |
| info = IEEE80211_SKB_CB(skb); |
| range = (void *) info->rate_driver_data; |
| len = (range->extra_len + len) & ~0x3; |
| |
| spin_lock_irqsave(&priv->tx_queue.lock, flags); |
| if (unlikely(skb_queue_len(&priv->tx_queue) == 32)) { |
| /* |
| * The tx_queue is now really full. |
| * |
| * TODO: check if the device has crashed and reset it. |
| */ |
| spin_unlock_irqrestore(&priv->tx_queue.lock, flags); |
| return -EBUSY; |
| } |
| |
| skb_queue_walk(&priv->tx_queue, entry) { |
| u32 hole_size; |
| info = IEEE80211_SKB_CB(entry); |
| range = (void *) info->rate_driver_data; |
| hole_size = range->start_addr - last_addr; |
| |
| if (!target_skb && hole_size >= len) { |
| target_skb = entry->prev; |
| hole_size -= len; |
| target_addr = last_addr; |
| break; |
| } |
| last_addr = range->end_addr; |
| } |
| if (unlikely(!target_skb)) { |
| if (priv->rx_end - last_addr >= len) { |
| target_skb = priv->tx_queue.prev; |
| if (!skb_queue_empty(&priv->tx_queue)) { |
| info = IEEE80211_SKB_CB(target_skb); |
| range = (void *)info->rate_driver_data; |
| target_addr = range->end_addr; |
| } |
| } else { |
| spin_unlock_irqrestore(&priv->tx_queue.lock, flags); |
| return -ENOSPC; |
| } |
| } |
| |
| info = IEEE80211_SKB_CB(skb); |
| range = (void *) info->rate_driver_data; |
| range->start_addr = target_addr; |
| range->end_addr = target_addr + len; |
| data->req_id = cpu_to_le32(target_addr + priv->headroom); |
| if (IS_DATA_FRAME(skb) && |
| unlikely(GET_HW_QUEUE(skb) == P54_QUEUE_BEACON)) |
| priv->beacon_req_id = data->req_id; |
| |
| __skb_queue_after(&priv->tx_queue, target_skb, skb); |
| spin_unlock_irqrestore(&priv->tx_queue.lock, flags); |
| return 0; |
| } |
| |
| static void p54_tx_pending(struct p54_common *priv) |
| { |
| struct sk_buff *skb; |
| int ret; |
| |
| skb = skb_dequeue(&priv->tx_pending); |
| if (unlikely(!skb)) |
| return ; |
| |
| ret = p54_assign_address(priv, skb); |
| if (unlikely(ret)) |
| skb_queue_head(&priv->tx_pending, skb); |
| else |
| priv->tx(priv->hw, skb); |
| } |
| |
| static void p54_wake_queues(struct p54_common *priv) |
| { |
| unsigned long flags; |
| unsigned int i; |
| |
| if (unlikely(priv->mode == NL80211_IFTYPE_UNSPECIFIED)) |
| return ; |
| |
| p54_tx_pending(priv); |
| |
| spin_lock_irqsave(&priv->tx_stats_lock, flags); |
| for (i = 0; i < priv->hw->queues; i++) { |
| if (priv->tx_stats[i + P54_QUEUE_DATA].len < |
| priv->tx_stats[i + P54_QUEUE_DATA].limit) |
| ieee80211_wake_queue(priv->hw, i); |
| } |
| spin_unlock_irqrestore(&priv->tx_stats_lock, flags); |
| } |
| |
| static int p54_tx_qos_accounting_alloc(struct p54_common *priv, |
| struct sk_buff *skb, |
| const u16 p54_queue) |
| { |
| struct p54_tx_queue_stats *queue; |
| unsigned long flags; |
| |
| if (WARN_ON(p54_queue >= P54_QUEUE_NUM)) |
| return -EINVAL; |
| |
| queue = &priv->tx_stats[p54_queue]; |
| |
| spin_lock_irqsave(&priv->tx_stats_lock, flags); |
| if (unlikely(queue->len >= queue->limit && IS_QOS_QUEUE(p54_queue))) { |
| spin_unlock_irqrestore(&priv->tx_stats_lock, flags); |
| return -ENOSPC; |
| } |
| |
| queue->len++; |
| queue->count++; |
| |
| if (unlikely(queue->len == queue->limit && IS_QOS_QUEUE(p54_queue))) { |
| u16 ac_queue = p54_queue - P54_QUEUE_DATA; |
| ieee80211_stop_queue(priv->hw, ac_queue); |
| } |
| |
| spin_unlock_irqrestore(&priv->tx_stats_lock, flags); |
| return 0; |
| } |
| |
| static void p54_tx_qos_accounting_free(struct p54_common *priv, |
| struct sk_buff *skb) |
| { |
| if (IS_DATA_FRAME(skb)) { |
| unsigned long flags; |
| |
| spin_lock_irqsave(&priv->tx_stats_lock, flags); |
| priv->tx_stats[GET_HW_QUEUE(skb)].len--; |
| spin_unlock_irqrestore(&priv->tx_stats_lock, flags); |
| |
| if (unlikely(GET_HW_QUEUE(skb) == P54_QUEUE_BEACON)) { |
| if (priv->beacon_req_id == GET_REQ_ID(skb)) { |
| /* this is the active beacon set anymore */ |
| priv->beacon_req_id = 0; |
| } |
| complete(&priv->beacon_comp); |
| } |
| } |
| p54_wake_queues(priv); |
| } |
| |
| void p54_free_skb(struct ieee80211_hw *dev, struct sk_buff *skb) |
| { |
| struct p54_common *priv = dev->priv; |
| if (unlikely(!skb)) |
| return ; |
| |
| skb_unlink(skb, &priv->tx_queue); |
| p54_tx_qos_accounting_free(priv, skb); |
| dev_kfree_skb_any(skb); |
| } |
| EXPORT_SYMBOL_GPL(p54_free_skb); |
| |
| static struct sk_buff *p54_find_and_unlink_skb(struct p54_common *priv, |
| const __le32 req_id) |
| { |
| struct sk_buff *entry; |
| unsigned long flags; |
| |
| spin_lock_irqsave(&priv->tx_queue.lock, flags); |
| skb_queue_walk(&priv->tx_queue, entry) { |
| struct p54_hdr *hdr = (struct p54_hdr *) entry->data; |
| |
| if (hdr->req_id == req_id) { |
| __skb_unlink(entry, &priv->tx_queue); |
| spin_unlock_irqrestore(&priv->tx_queue.lock, flags); |
| p54_tx_qos_accounting_free(priv, entry); |
| return entry; |
| } |
| } |
| spin_unlock_irqrestore(&priv->tx_queue.lock, flags); |
| return NULL; |
| } |
| |
| void p54_tx(struct p54_common *priv, struct sk_buff *skb) |
| { |
| skb_queue_tail(&priv->tx_pending, skb); |
| p54_tx_pending(priv); |
| } |
| |
| static int p54_rssi_to_dbm(struct p54_common *priv, int rssi) |
| { |
| int band = priv->hw->conf.channel->band; |
| |
| if (priv->rxhw != 5) { |
| return ((rssi * priv->rssical_db[band].mul) / 64 + |
| priv->rssical_db[band].add) / 4; |
| } else { |
| /* |
| * TODO: find the correct formula |
| */ |
| return rssi / 2 - 110; |
| } |
| } |
| |
| /* |
| * Even if the firmware is capable of dealing with incoming traffic, |
| * while dozing, we have to prepared in case mac80211 uses PS-POLL |
| * to retrieve outstanding frames from our AP. |
| * (see comment in net/mac80211/mlme.c @ line 1993) |
| */ |
| static void p54_pspoll_workaround(struct p54_common *priv, struct sk_buff *skb) |
| { |
| struct ieee80211_hdr *hdr = (void *) skb->data; |
| struct ieee80211_tim_ie *tim_ie; |
| u8 *tim; |
| u8 tim_len; |
| bool new_psm; |
| |
| /* only beacons have a TIM IE */ |
| if (!ieee80211_is_beacon(hdr->frame_control)) |
| return; |
| |
| if (!priv->aid) |
| return; |
| |
| /* only consider beacons from the associated BSSID */ |
| if (compare_ether_addr(hdr->addr3, priv->bssid)) |
| return; |
| |
| tim = p54_find_ie(skb, WLAN_EID_TIM); |
| if (!tim) |
| return; |
| |
| tim_len = tim[1]; |
| tim_ie = (struct ieee80211_tim_ie *) &tim[2]; |
| |
| new_psm = ieee80211_check_tim(tim_ie, tim_len, priv->aid); |
| if (new_psm != priv->powersave_override) { |
| priv->powersave_override = new_psm; |
| p54_set_ps(priv); |
| } |
| } |
| |
| static int p54_rx_data(struct p54_common *priv, struct sk_buff *skb) |
| { |
| struct p54_rx_data *hdr = (struct p54_rx_data *) skb->data; |
| struct ieee80211_rx_status *rx_status = IEEE80211_SKB_RXCB(skb); |
| u16 freq = le16_to_cpu(hdr->freq); |
| size_t header_len = sizeof(*hdr); |
| u32 tsf32; |
| u8 rate = hdr->rate & 0xf; |
| |
| /* |
| * If the device is in a unspecified state we have to |
| * ignore all data frames. Else we could end up with a |
| * nasty crash. |
| */ |
| if (unlikely(priv->mode == NL80211_IFTYPE_UNSPECIFIED)) |
| return 0; |
| |
| if (!(hdr->flags & cpu_to_le16(P54_HDR_FLAG_DATA_IN_FCS_GOOD))) |
| return 0; |
| |
| if (hdr->decrypt_status == P54_DECRYPT_OK) |
| rx_status->flag |= RX_FLAG_DECRYPTED; |
| if ((hdr->decrypt_status == P54_DECRYPT_FAIL_MICHAEL) || |
| (hdr->decrypt_status == P54_DECRYPT_FAIL_TKIP)) |
| rx_status->flag |= RX_FLAG_MMIC_ERROR; |
| |
| rx_status->signal = p54_rssi_to_dbm(priv, hdr->rssi); |
| if (hdr->rate & 0x10) |
| rx_status->flag |= RX_FLAG_SHORTPRE; |
| if (priv->hw->conf.channel->band == IEEE80211_BAND_5GHZ) |
| rx_status->rate_idx = (rate < 4) ? 0 : rate - 4; |
| else |
| rx_status->rate_idx = rate; |
| |
| rx_status->freq = freq; |
| rx_status->band = priv->hw->conf.channel->band; |
| rx_status->antenna = hdr->antenna; |
| |
| tsf32 = le32_to_cpu(hdr->tsf32); |
| if (tsf32 < priv->tsf_low32) |
| priv->tsf_high32++; |
| rx_status->mactime = ((u64)priv->tsf_high32) << 32 | tsf32; |
| priv->tsf_low32 = tsf32; |
| |
| rx_status->flag |= RX_FLAG_TSFT; |
| |
| if (hdr->flags & cpu_to_le16(P54_HDR_FLAG_DATA_ALIGN)) |
| header_len += hdr->align[0]; |
| |
| skb_pull(skb, header_len); |
| skb_trim(skb, le16_to_cpu(hdr->len)); |
| if (unlikely(priv->hw->conf.flags & IEEE80211_CONF_PS)) |
| p54_pspoll_workaround(priv, skb); |
| |
| ieee80211_rx_irqsafe(priv->hw, skb); |
| |
| ieee80211_queue_delayed_work(priv->hw, &priv->work, |
| msecs_to_jiffies(P54_STATISTICS_UPDATE)); |
| |
| return -1; |
| } |
| |
| static void p54_rx_frame_sent(struct p54_common *priv, struct sk_buff *skb) |
| { |
| struct p54_hdr *hdr = (struct p54_hdr *) skb->data; |
| struct p54_frame_sent *payload = (struct p54_frame_sent *) hdr->data; |
| struct ieee80211_tx_info *info; |
| struct p54_hdr *entry_hdr; |
| struct p54_tx_data *entry_data; |
| struct sk_buff *entry; |
| unsigned int pad = 0, frame_len; |
| int count, idx; |
| |
| entry = p54_find_and_unlink_skb(priv, hdr->req_id); |
| if (unlikely(!entry)) |
| return ; |
| |
| frame_len = entry->len; |
| info = IEEE80211_SKB_CB(entry); |
| entry_hdr = (struct p54_hdr *) entry->data; |
| entry_data = (struct p54_tx_data *) entry_hdr->data; |
| priv->stats.dot11ACKFailureCount += payload->tries - 1; |
| |
| /* |
| * Frames in P54_QUEUE_FWSCAN and P54_QUEUE_BEACON are |
| * generated by the driver. Therefore tx_status is bogus |
| * and we don't want to confuse the mac80211 stack. |
| */ |
| if (unlikely(entry_data->hw_queue < P54_QUEUE_FWSCAN)) { |
| dev_kfree_skb_any(entry); |
| return ; |
| } |
| |
| /* |
| * Clear manually, ieee80211_tx_info_clear_status would |
| * clear the counts too and we need them. |
| */ |
| memset(&info->status.ampdu_ack_len, 0, |
| sizeof(struct ieee80211_tx_info) - |
| offsetof(struct ieee80211_tx_info, status.ampdu_ack_len)); |
| BUILD_BUG_ON(offsetof(struct ieee80211_tx_info, |
| status.ampdu_ack_len) != 23); |
| |
| if (entry_hdr->flags & cpu_to_le16(P54_HDR_FLAG_DATA_ALIGN)) |
| pad = entry_data->align[0]; |
| |
| /* walk through the rates array and adjust the counts */ |
| count = payload->tries; |
| for (idx = 0; idx < 4; idx++) { |
| if (count >= info->status.rates[idx].count) { |
| count -= info->status.rates[idx].count; |
| } else if (count > 0) { |
| info->status.rates[idx].count = count; |
| count = 0; |
| } else { |
| info->status.rates[idx].idx = -1; |
| info->status.rates[idx].count = 0; |
| } |
| } |
| |
| if (!(info->flags & IEEE80211_TX_CTL_NO_ACK) && |
| !(payload->status & P54_TX_FAILED)) |
| info->flags |= IEEE80211_TX_STAT_ACK; |
| if (payload->status & P54_TX_PSM_CANCELLED) |
| info->flags |= IEEE80211_TX_STAT_TX_FILTERED; |
| info->status.ack_signal = p54_rssi_to_dbm(priv, |
| (int)payload->ack_rssi); |
| |
| /* Undo all changes to the frame. */ |
| switch (entry_data->key_type) { |
| case P54_CRYPTO_TKIPMICHAEL: { |
| u8 *iv = (u8 *)(entry_data->align + pad + |
| entry_data->crypt_offset); |
| |
| /* Restore the original TKIP IV. */ |
| iv[2] = iv[0]; |
| iv[0] = iv[1]; |
| iv[1] = (iv[0] | 0x20) & 0x7f; /* WEPSeed - 8.3.2.2 */ |
| |
| frame_len -= 12; /* remove TKIP_MMIC + TKIP_ICV */ |
| break; |
| } |
| case P54_CRYPTO_AESCCMP: |
| frame_len -= 8; /* remove CCMP_MIC */ |
| break; |
| case P54_CRYPTO_WEP: |
| frame_len -= 4; /* remove WEP_ICV */ |
| break; |
| } |
| |
| skb_trim(entry, frame_len); |
| skb_pull(entry, sizeof(*hdr) + pad + sizeof(*entry_data)); |
| ieee80211_tx_status_irqsafe(priv->hw, entry); |
| } |
| |
| static void p54_rx_eeprom_readback(struct p54_common *priv, |
| struct sk_buff *skb) |
| { |
| struct p54_hdr *hdr = (struct p54_hdr *) skb->data; |
| struct p54_eeprom_lm86 *eeprom = (struct p54_eeprom_lm86 *) hdr->data; |
| struct sk_buff *tmp; |
| |
| if (!priv->eeprom) |
| return ; |
| |
| if (priv->fw_var >= 0x509) { |
| memcpy(priv->eeprom, eeprom->v2.data, |
| le16_to_cpu(eeprom->v2.len)); |
| } else { |
| memcpy(priv->eeprom, eeprom->v1.data, |
| le16_to_cpu(eeprom->v1.len)); |
| } |
| |
| priv->eeprom = NULL; |
| tmp = p54_find_and_unlink_skb(priv, hdr->req_id); |
| dev_kfree_skb_any(tmp); |
| complete(&priv->eeprom_comp); |
| } |
| |
| static void p54_rx_stats(struct p54_common *priv, struct sk_buff *skb) |
| { |
| struct p54_hdr *hdr = (struct p54_hdr *) skb->data; |
| struct p54_statistics *stats = (struct p54_statistics *) hdr->data; |
| struct sk_buff *tmp; |
| u32 tsf32; |
| |
| if (unlikely(priv->mode == NL80211_IFTYPE_UNSPECIFIED)) |
| return ; |
| |
| tsf32 = le32_to_cpu(stats->tsf32); |
| if (tsf32 < priv->tsf_low32) |
| priv->tsf_high32++; |
| priv->tsf_low32 = tsf32; |
| |
| priv->stats.dot11RTSFailureCount = le32_to_cpu(stats->rts_fail); |
| priv->stats.dot11RTSSuccessCount = le32_to_cpu(stats->rts_success); |
| priv->stats.dot11FCSErrorCount = le32_to_cpu(stats->rx_bad_fcs); |
| |
| priv->noise = p54_rssi_to_dbm(priv, le32_to_cpu(stats->noise)); |
| |
| tmp = p54_find_and_unlink_skb(priv, hdr->req_id); |
| dev_kfree_skb_any(tmp); |
| } |
| |
| static void p54_rx_trap(struct p54_common *priv, struct sk_buff *skb) |
| { |
| struct p54_hdr *hdr = (struct p54_hdr *) skb->data; |
| struct p54_trap *trap = (struct p54_trap *) hdr->data; |
| u16 event = le16_to_cpu(trap->event); |
| u16 freq = le16_to_cpu(trap->frequency); |
| |
| switch (event) { |
| case P54_TRAP_BEACON_TX: |
| break; |
| case P54_TRAP_RADAR: |
| wiphy_info(priv->hw->wiphy, "radar (freq:%d MHz)\n", freq); |
| break; |
| case P54_TRAP_NO_BEACON: |
| if (priv->vif) |
| ieee80211_beacon_loss(priv->vif); |
| break; |
| case P54_TRAP_SCAN: |
| break; |
| case P54_TRAP_TBTT: |
| break; |
| case P54_TRAP_TIMER: |
| break; |
| case P54_TRAP_FAA_RADIO_OFF: |
| wiphy_rfkill_set_hw_state(priv->hw->wiphy, true); |
| break; |
| case P54_TRAP_FAA_RADIO_ON: |
| wiphy_rfkill_set_hw_state(priv->hw->wiphy, false); |
| break; |
| default: |
| wiphy_info(priv->hw->wiphy, "received event:%x freq:%d\n", |
| event, freq); |
| break; |
| } |
| } |
| |
| static int p54_rx_control(struct p54_common *priv, struct sk_buff *skb) |
| { |
| struct p54_hdr *hdr = (struct p54_hdr *) skb->data; |
| |
| switch (le16_to_cpu(hdr->type)) { |
| case P54_CONTROL_TYPE_TXDONE: |
| p54_rx_frame_sent(priv, skb); |
| break; |
| case P54_CONTROL_TYPE_TRAP: |
| p54_rx_trap(priv, skb); |
| break; |
| case P54_CONTROL_TYPE_BBP: |
| break; |
| case P54_CONTROL_TYPE_STAT_READBACK: |
| p54_rx_stats(priv, skb); |
| break; |
| case P54_CONTROL_TYPE_EEPROM_READBACK: |
| p54_rx_eeprom_readback(priv, skb); |
| break; |
| default: |
| wiphy_debug(priv->hw->wiphy, |
| "not handling 0x%02x type control frame\n", |
| le16_to_cpu(hdr->type)); |
| break; |
| } |
| return 0; |
| } |
| |
| /* returns zero if skb can be reused */ |
| int p54_rx(struct ieee80211_hw *dev, struct sk_buff *skb) |
| { |
| struct p54_common *priv = dev->priv; |
| u16 type = le16_to_cpu(*((__le16 *)skb->data)); |
| |
| if (type & P54_HDR_FLAG_CONTROL) |
| return p54_rx_control(priv, skb); |
| else |
| return p54_rx_data(priv, skb); |
| } |
| EXPORT_SYMBOL_GPL(p54_rx); |
| |
| static void p54_tx_80211_header(struct p54_common *priv, struct sk_buff *skb, |
| struct ieee80211_tx_info *info, u8 *queue, |
| u32 *extra_len, u16 *flags, u16 *aid, |
| bool *burst_possible) |
| { |
| struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data; |
| |
| if (ieee80211_is_data_qos(hdr->frame_control)) |
| *burst_possible = true; |
| else |
| *burst_possible = false; |
| |
| if (!(info->flags & IEEE80211_TX_CTL_ASSIGN_SEQ)) |
| *flags |= P54_HDR_FLAG_DATA_OUT_SEQNR; |
| |
| if (info->flags & IEEE80211_TX_CTL_PSPOLL_RESPONSE) |
| *flags |= P54_HDR_FLAG_DATA_OUT_NOCANCEL; |
| |
| if (info->flags & IEEE80211_TX_CTL_CLEAR_PS_FILT) |
| *flags |= P54_HDR_FLAG_DATA_OUT_NOCANCEL; |
| |
| *queue = skb_get_queue_mapping(skb) + P54_QUEUE_DATA; |
| |
| switch (priv->mode) { |
| case NL80211_IFTYPE_MONITOR: |
| /* |
| * We have to set P54_HDR_FLAG_DATA_OUT_PROMISC for |
| * every frame in promiscuous/monitor mode. |
| * see STSW45x0C LMAC API - page 12. |
| */ |
| *aid = 0; |
| *flags |= P54_HDR_FLAG_DATA_OUT_PROMISC; |
| break; |
| case NL80211_IFTYPE_STATION: |
| *aid = 1; |
| break; |
| case NL80211_IFTYPE_AP: |
| case NL80211_IFTYPE_ADHOC: |
| case NL80211_IFTYPE_MESH_POINT: |
| if (info->flags & IEEE80211_TX_CTL_SEND_AFTER_DTIM) { |
| *aid = 0; |
| *queue = P54_QUEUE_CAB; |
| return; |
| } |
| |
| if (unlikely(ieee80211_is_mgmt(hdr->frame_control))) { |
| if (ieee80211_is_probe_resp(hdr->frame_control)) { |
| *aid = 0; |
| *flags |= P54_HDR_FLAG_DATA_OUT_TIMESTAMP | |
| P54_HDR_FLAG_DATA_OUT_NOCANCEL; |
| return; |
| } else if (ieee80211_is_beacon(hdr->frame_control)) { |
| *aid = 0; |
| |
| if (info->flags & IEEE80211_TX_CTL_INJECTED) { |
| /* |
| * Injecting beacons on top of a AP is |
| * not a good idea... nevertheless, |
| * it should be doable. |
| */ |
| |
| return; |
| } |
| |
| *flags |= P54_HDR_FLAG_DATA_OUT_TIMESTAMP; |
| *queue = P54_QUEUE_BEACON; |
| *extra_len = IEEE80211_MAX_TIM_LEN; |
| return; |
| } |
| } |
| |
| if (info->control.sta) |
| *aid = info->control.sta->aid; |
| break; |
| } |
| } |
| |
| static u8 p54_convert_algo(u32 cipher) |
| { |
| switch (cipher) { |
| case WLAN_CIPHER_SUITE_WEP40: |
| case WLAN_CIPHER_SUITE_WEP104: |
| return P54_CRYPTO_WEP; |
| case WLAN_CIPHER_SUITE_TKIP: |
| return P54_CRYPTO_TKIPMICHAEL; |
| case WLAN_CIPHER_SUITE_CCMP: |
| return P54_CRYPTO_AESCCMP; |
| default: |
| return 0; |
| } |
| } |
| |
| int p54_tx_80211(struct ieee80211_hw *dev, struct sk_buff *skb) |
| { |
| struct p54_common *priv = dev->priv; |
| struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); |
| struct p54_tx_info *p54info; |
| struct p54_hdr *hdr; |
| struct p54_tx_data *txhdr; |
| unsigned int padding, len, extra_len; |
| int i, j, ridx; |
| u16 hdr_flags = 0, aid = 0; |
| u8 rate, queue = 0, crypt_offset = 0; |
| u8 cts_rate = 0x20; |
| u8 rc_flags; |
| u8 calculated_tries[4]; |
| u8 nrates = 0, nremaining = 8; |
| bool burst_allowed = false; |
| |
| p54_tx_80211_header(priv, skb, info, &queue, &extra_len, |
| &hdr_flags, &aid, &burst_allowed); |
| |
| if (p54_tx_qos_accounting_alloc(priv, skb, queue)) { |
| if (!IS_QOS_QUEUE(queue)) { |
| dev_kfree_skb_any(skb); |
| return NETDEV_TX_OK; |
| } else { |
| return NETDEV_TX_BUSY; |
| } |
| } |
| |
| padding = (unsigned long)(skb->data - (sizeof(*hdr) + sizeof(*txhdr))) & 3; |
| len = skb->len; |
| |
| if (info->control.hw_key) { |
| crypt_offset = ieee80211_get_hdrlen_from_skb(skb); |
| if (info->control.hw_key->cipher == WLAN_CIPHER_SUITE_TKIP) { |
| u8 *iv = (u8 *)(skb->data + crypt_offset); |
| /* |
| * The firmware excepts that the IV has to have |
| * this special format |
| */ |
| iv[1] = iv[0]; |
| iv[0] = iv[2]; |
| iv[2] = 0; |
| } |
| } |
| |
| txhdr = (struct p54_tx_data *) skb_push(skb, sizeof(*txhdr) + padding); |
| hdr = (struct p54_hdr *) skb_push(skb, sizeof(*hdr)); |
| |
| if (padding) |
| hdr_flags |= P54_HDR_FLAG_DATA_ALIGN; |
| hdr->type = cpu_to_le16(aid); |
| hdr->rts_tries = info->control.rates[0].count; |
| |
| /* |
| * we register the rates in perfect order, and |
| * RTS/CTS won't happen on 5 GHz |
| */ |
| cts_rate = info->control.rts_cts_rate_idx; |
| |
| memset(&txhdr->rateset, 0, sizeof(txhdr->rateset)); |
| |
| /* see how many rates got used */ |
| for (i = 0; i < dev->max_rates; i++) { |
| if (info->control.rates[i].idx < 0) |
| break; |
| nrates++; |
| } |
| |
| /* limit tries to 8/nrates per rate */ |
| for (i = 0; i < nrates; i++) { |
| /* |
| * The magic expression here is equivalent to 8/nrates for |
| * all values that matter, but avoids division and jumps. |
| * Note that nrates can only take the values 1 through 4. |
| */ |
| calculated_tries[i] = min_t(int, ((15 >> nrates) | 1) + 1, |
| info->control.rates[i].count); |
| nremaining -= calculated_tries[i]; |
| } |
| |
| /* if there are tries left, distribute from back to front */ |
| for (i = nrates - 1; nremaining > 0 && i >= 0; i--) { |
| int tmp = info->control.rates[i].count - calculated_tries[i]; |
| |
| if (tmp <= 0) |
| continue; |
| /* RC requested more tries at this rate */ |
| |
| tmp = min_t(int, tmp, nremaining); |
| calculated_tries[i] += tmp; |
| nremaining -= tmp; |
| } |
| |
| ridx = 0; |
| for (i = 0; i < nrates && ridx < 8; i++) { |
| /* we register the rates in perfect order */ |
| rate = info->control.rates[i].idx; |
| if (info->band == IEEE80211_BAND_5GHZ) |
| rate += 4; |
| |
| /* store the count we actually calculated for TX status */ |
| info->control.rates[i].count = calculated_tries[i]; |
| |
| rc_flags = info->control.rates[i].flags; |
| if (rc_flags & IEEE80211_TX_RC_USE_SHORT_PREAMBLE) { |
| rate |= 0x10; |
| cts_rate |= 0x10; |
| } |
| if (rc_flags & IEEE80211_TX_RC_USE_RTS_CTS) { |
| burst_allowed = false; |
| rate |= 0x40; |
| } else if (rc_flags & IEEE80211_TX_RC_USE_CTS_PROTECT) { |
| rate |= 0x20; |
| burst_allowed = false; |
| } |
| for (j = 0; j < calculated_tries[i] && ridx < 8; j++) { |
| txhdr->rateset[ridx] = rate; |
| ridx++; |
| } |
| } |
| |
| if (burst_allowed) |
| hdr_flags |= P54_HDR_FLAG_DATA_OUT_BURST; |
| |
| /* TODO: enable bursting */ |
| hdr->flags = cpu_to_le16(hdr_flags); |
| hdr->tries = ridx; |
| txhdr->rts_rate_idx = 0; |
| if (info->control.hw_key) { |
| txhdr->key_type = p54_convert_algo(info->control.hw_key->cipher); |
| txhdr->key_len = min((u8)16, info->control.hw_key->keylen); |
| memcpy(txhdr->key, info->control.hw_key->key, txhdr->key_len); |
| if (info->control.hw_key->cipher == WLAN_CIPHER_SUITE_TKIP) { |
| /* reserve space for the MIC key */ |
| len += 8; |
| memcpy(skb_put(skb, 8), &(info->control.hw_key->key |
| [NL80211_TKIP_DATA_OFFSET_TX_MIC_KEY]), 8); |
| } |
| /* reserve some space for ICV */ |
| len += info->control.hw_key->icv_len; |
| memset(skb_put(skb, info->control.hw_key->icv_len), 0, |
| info->control.hw_key->icv_len); |
| } else { |
| txhdr->key_type = 0; |
| txhdr->key_len = 0; |
| } |
| txhdr->crypt_offset = crypt_offset; |
| txhdr->hw_queue = queue; |
| txhdr->backlog = priv->tx_stats[queue].len - 1; |
| memset(txhdr->durations, 0, sizeof(txhdr->durations)); |
| txhdr->tx_antenna = ((info->antenna_sel_tx == 0) ? |
| 2 : info->antenna_sel_tx - 1) & priv->tx_diversity_mask; |
| if (priv->rxhw == 5) { |
| txhdr->longbow.cts_rate = cts_rate; |
| txhdr->longbow.output_power = cpu_to_le16(priv->output_power); |
| } else { |
| txhdr->normal.output_power = priv->output_power; |
| txhdr->normal.cts_rate = cts_rate; |
| } |
| if (padding) |
| txhdr->align[0] = padding; |
| |
| hdr->len = cpu_to_le16(len); |
| /* modifies skb->cb and with it info, so must be last! */ |
| p54info = (void *) info->rate_driver_data; |
| p54info->extra_len = extra_len; |
| |
| p54_tx(priv, skb); |
| return NETDEV_TX_OK; |
| } |