| #include <linux/config.h> |
| #include <linux/init.h> |
| #include <linux/kernel.h> |
| |
| #include <linux/string.h> |
| #include <linux/bitops.h> |
| #include <linux/smp.h> |
| #include <linux/thread_info.h> |
| |
| #include <asm/processor.h> |
| #include <asm/msr.h> |
| #include <asm/uaccess.h> |
| |
| #include "cpu.h" |
| |
| #ifdef CONFIG_X86_LOCAL_APIC |
| #include <asm/mpspec.h> |
| #include <asm/apic.h> |
| #include <mach_apic.h> |
| #endif |
| |
| extern int trap_init_f00f_bug(void); |
| |
| #ifdef CONFIG_X86_INTEL_USERCOPY |
| /* |
| * Alignment at which movsl is preferred for bulk memory copies. |
| */ |
| struct movsl_mask movsl_mask __read_mostly; |
| #endif |
| |
| void __devinit early_intel_workaround(struct cpuinfo_x86 *c) |
| { |
| if (c->x86_vendor != X86_VENDOR_INTEL) |
| return; |
| /* Netburst reports 64 bytes clflush size, but does IO in 128 bytes */ |
| if (c->x86 == 15 && c->x86_cache_alignment == 64) |
| c->x86_cache_alignment = 128; |
| } |
| |
| /* |
| * Early probe support logic for ppro memory erratum #50 |
| * |
| * This is called before we do cpu ident work |
| */ |
| |
| int __devinit ppro_with_ram_bug(void) |
| { |
| /* Uses data from early_cpu_detect now */ |
| if (boot_cpu_data.x86_vendor == X86_VENDOR_INTEL && |
| boot_cpu_data.x86 == 6 && |
| boot_cpu_data.x86_model == 1 && |
| boot_cpu_data.x86_mask < 8) { |
| printk(KERN_INFO "Pentium Pro with Errata#50 detected. Taking evasive action.\n"); |
| return 1; |
| } |
| return 0; |
| } |
| |
| |
| /* |
| * P4 Xeon errata 037 workaround. |
| * Hardware prefetcher may cause stale data to be loaded into the cache. |
| */ |
| static void __devinit Intel_errata_workarounds(struct cpuinfo_x86 *c) |
| { |
| unsigned long lo, hi; |
| |
| if ((c->x86 == 15) && (c->x86_model == 1) && (c->x86_mask == 1)) { |
| rdmsr (MSR_IA32_MISC_ENABLE, lo, hi); |
| if ((lo & (1<<9)) == 0) { |
| printk (KERN_INFO "CPU: C0 stepping P4 Xeon detected.\n"); |
| printk (KERN_INFO "CPU: Disabling hardware prefetching (Errata 037)\n"); |
| lo |= (1<<9); /* Disable hw prefetching */ |
| wrmsr (MSR_IA32_MISC_ENABLE, lo, hi); |
| } |
| } |
| } |
| |
| |
| /* |
| * find out the number of processor cores on the die |
| */ |
| static int __devinit num_cpu_cores(struct cpuinfo_x86 *c) |
| { |
| unsigned int eax, ebx, ecx, edx; |
| |
| if (c->cpuid_level < 4) |
| return 1; |
| |
| /* Intel has a non-standard dependency on %ecx for this CPUID level. */ |
| cpuid_count(4, 0, &eax, &ebx, &ecx, &edx); |
| if (eax & 0x1f) |
| return ((eax >> 26) + 1); |
| else |
| return 1; |
| } |
| |
| static void __devinit init_intel(struct cpuinfo_x86 *c) |
| { |
| unsigned int l2 = 0; |
| char *p = NULL; |
| |
| #ifdef CONFIG_X86_F00F_BUG |
| /* |
| * All current models of Pentium and Pentium with MMX technology CPUs |
| * have the F0 0F bug, which lets nonprivileged users lock up the system. |
| * Note that the workaround only should be initialized once... |
| */ |
| c->f00f_bug = 0; |
| if ( c->x86 == 5 ) { |
| static int f00f_workaround_enabled = 0; |
| |
| c->f00f_bug = 1; |
| if ( !f00f_workaround_enabled ) { |
| trap_init_f00f_bug(); |
| printk(KERN_NOTICE "Intel Pentium with F0 0F bug - workaround enabled.\n"); |
| f00f_workaround_enabled = 1; |
| } |
| } |
| #endif |
| |
| select_idle_routine(c); |
| l2 = init_intel_cacheinfo(c); |
| |
| /* SEP CPUID bug: Pentium Pro reports SEP but doesn't have it until model 3 mask 3 */ |
| if ((c->x86<<8 | c->x86_model<<4 | c->x86_mask) < 0x633) |
| clear_bit(X86_FEATURE_SEP, c->x86_capability); |
| |
| /* Names for the Pentium II/Celeron processors |
| detectable only by also checking the cache size. |
| Dixon is NOT a Celeron. */ |
| if (c->x86 == 6) { |
| switch (c->x86_model) { |
| case 5: |
| if (c->x86_mask == 0) { |
| if (l2 == 0) |
| p = "Celeron (Covington)"; |
| else if (l2 == 256) |
| p = "Mobile Pentium II (Dixon)"; |
| } |
| break; |
| |
| case 6: |
| if (l2 == 128) |
| p = "Celeron (Mendocino)"; |
| else if (c->x86_mask == 0 || c->x86_mask == 5) |
| p = "Celeron-A"; |
| break; |
| |
| case 8: |
| if (l2 == 128) |
| p = "Celeron (Coppermine)"; |
| break; |
| } |
| } |
| |
| if ( p ) |
| strcpy(c->x86_model_id, p); |
| |
| c->x86_num_cores = num_cpu_cores(c); |
| |
| detect_ht(c); |
| |
| /* Work around errata */ |
| Intel_errata_workarounds(c); |
| |
| #ifdef CONFIG_X86_INTEL_USERCOPY |
| /* |
| * Set up the preferred alignment for movsl bulk memory moves |
| */ |
| switch (c->x86) { |
| case 4: /* 486: untested */ |
| break; |
| case 5: /* Old Pentia: untested */ |
| break; |
| case 6: /* PII/PIII only like movsl with 8-byte alignment */ |
| movsl_mask.mask = 7; |
| break; |
| case 15: /* P4 is OK down to 8-byte alignment */ |
| movsl_mask.mask = 7; |
| break; |
| } |
| #endif |
| |
| if (c->x86 == 15) |
| set_bit(X86_FEATURE_P4, c->x86_capability); |
| if (c->x86 == 6) |
| set_bit(X86_FEATURE_P3, c->x86_capability); |
| } |
| |
| |
| static unsigned int intel_size_cache(struct cpuinfo_x86 * c, unsigned int size) |
| { |
| /* Intel PIII Tualatin. This comes in two flavours. |
| * One has 256kb of cache, the other 512. We have no way |
| * to determine which, so we use a boottime override |
| * for the 512kb model, and assume 256 otherwise. |
| */ |
| if ((c->x86 == 6) && (c->x86_model == 11) && (size == 0)) |
| size = 256; |
| return size; |
| } |
| |
| static struct cpu_dev intel_cpu_dev __devinitdata = { |
| .c_vendor = "Intel", |
| .c_ident = { "GenuineIntel" }, |
| .c_models = { |
| { .vendor = X86_VENDOR_INTEL, .family = 4, .model_names = |
| { |
| [0] = "486 DX-25/33", |
| [1] = "486 DX-50", |
| [2] = "486 SX", |
| [3] = "486 DX/2", |
| [4] = "486 SL", |
| [5] = "486 SX/2", |
| [7] = "486 DX/2-WB", |
| [8] = "486 DX/4", |
| [9] = "486 DX/4-WB" |
| } |
| }, |
| { .vendor = X86_VENDOR_INTEL, .family = 5, .model_names = |
| { |
| [0] = "Pentium 60/66 A-step", |
| [1] = "Pentium 60/66", |
| [2] = "Pentium 75 - 200", |
| [3] = "OverDrive PODP5V83", |
| [4] = "Pentium MMX", |
| [7] = "Mobile Pentium 75 - 200", |
| [8] = "Mobile Pentium MMX" |
| } |
| }, |
| { .vendor = X86_VENDOR_INTEL, .family = 6, .model_names = |
| { |
| [0] = "Pentium Pro A-step", |
| [1] = "Pentium Pro", |
| [3] = "Pentium II (Klamath)", |
| [4] = "Pentium II (Deschutes)", |
| [5] = "Pentium II (Deschutes)", |
| [6] = "Mobile Pentium II", |
| [7] = "Pentium III (Katmai)", |
| [8] = "Pentium III (Coppermine)", |
| [10] = "Pentium III (Cascades)", |
| [11] = "Pentium III (Tualatin)", |
| } |
| }, |
| { .vendor = X86_VENDOR_INTEL, .family = 15, .model_names = |
| { |
| [0] = "Pentium 4 (Unknown)", |
| [1] = "Pentium 4 (Willamette)", |
| [2] = "Pentium 4 (Northwood)", |
| [4] = "Pentium 4 (Foster)", |
| [5] = "Pentium 4 (Foster)", |
| } |
| }, |
| }, |
| .c_init = init_intel, |
| .c_identify = generic_identify, |
| .c_size_cache = intel_size_cache, |
| }; |
| |
| __init int intel_cpu_init(void) |
| { |
| cpu_devs[X86_VENDOR_INTEL] = &intel_cpu_dev; |
| return 0; |
| } |
| |
| // arch_initcall(intel_cpu_init); |
| |