| /* |
| * AMD Cryptographic Coprocessor (CCP) driver |
| * |
| * Copyright (C) 2013 Advanced Micro Devices, Inc. |
| * |
| * Author: Tom Lendacky <thomas.lendacky@amd.com> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/kernel.h> |
| #include <linux/pci.h> |
| #include <linux/pci_ids.h> |
| #include <linux/kthread.h> |
| #include <linux/sched.h> |
| #include <linux/interrupt.h> |
| #include <linux/spinlock.h> |
| #include <linux/mutex.h> |
| #include <linux/delay.h> |
| #include <linux/ccp.h> |
| #include <linux/scatterlist.h> |
| #include <crypto/scatterwalk.h> |
| #include <crypto/sha.h> |
| |
| #include "ccp-dev.h" |
| |
| enum ccp_memtype { |
| CCP_MEMTYPE_SYSTEM = 0, |
| CCP_MEMTYPE_KSB, |
| CCP_MEMTYPE_LOCAL, |
| CCP_MEMTYPE__LAST, |
| }; |
| |
| struct ccp_dma_info { |
| dma_addr_t address; |
| unsigned int offset; |
| unsigned int length; |
| enum dma_data_direction dir; |
| }; |
| |
| struct ccp_dm_workarea { |
| struct device *dev; |
| struct dma_pool *dma_pool; |
| unsigned int length; |
| |
| u8 *address; |
| struct ccp_dma_info dma; |
| }; |
| |
| struct ccp_sg_workarea { |
| struct scatterlist *sg; |
| unsigned int nents; |
| unsigned int length; |
| |
| struct scatterlist *dma_sg; |
| struct device *dma_dev; |
| unsigned int dma_count; |
| enum dma_data_direction dma_dir; |
| |
| unsigned int sg_used; |
| |
| u64 bytes_left; |
| }; |
| |
| struct ccp_data { |
| struct ccp_sg_workarea sg_wa; |
| struct ccp_dm_workarea dm_wa; |
| }; |
| |
| struct ccp_mem { |
| enum ccp_memtype type; |
| union { |
| struct ccp_dma_info dma; |
| u32 ksb; |
| } u; |
| }; |
| |
| struct ccp_aes_op { |
| enum ccp_aes_type type; |
| enum ccp_aes_mode mode; |
| enum ccp_aes_action action; |
| }; |
| |
| struct ccp_xts_aes_op { |
| enum ccp_aes_action action; |
| enum ccp_xts_aes_unit_size unit_size; |
| }; |
| |
| struct ccp_sha_op { |
| enum ccp_sha_type type; |
| u64 msg_bits; |
| }; |
| |
| struct ccp_rsa_op { |
| u32 mod_size; |
| u32 input_len; |
| }; |
| |
| struct ccp_passthru_op { |
| enum ccp_passthru_bitwise bit_mod; |
| enum ccp_passthru_byteswap byte_swap; |
| }; |
| |
| struct ccp_ecc_op { |
| enum ccp_ecc_function function; |
| }; |
| |
| struct ccp_op { |
| struct ccp_cmd_queue *cmd_q; |
| |
| u32 jobid; |
| u32 ioc; |
| u32 soc; |
| u32 ksb_key; |
| u32 ksb_ctx; |
| u32 init; |
| u32 eom; |
| |
| struct ccp_mem src; |
| struct ccp_mem dst; |
| |
| union { |
| struct ccp_aes_op aes; |
| struct ccp_xts_aes_op xts; |
| struct ccp_sha_op sha; |
| struct ccp_rsa_op rsa; |
| struct ccp_passthru_op passthru; |
| struct ccp_ecc_op ecc; |
| } u; |
| }; |
| |
| /* SHA initial context values */ |
| static const __be32 ccp_sha1_init[CCP_SHA_CTXSIZE / sizeof(__be32)] = { |
| cpu_to_be32(SHA1_H0), cpu_to_be32(SHA1_H1), |
| cpu_to_be32(SHA1_H2), cpu_to_be32(SHA1_H3), |
| cpu_to_be32(SHA1_H4), 0, 0, 0, |
| }; |
| |
| static const __be32 ccp_sha224_init[CCP_SHA_CTXSIZE / sizeof(__be32)] = { |
| cpu_to_be32(SHA224_H0), cpu_to_be32(SHA224_H1), |
| cpu_to_be32(SHA224_H2), cpu_to_be32(SHA224_H3), |
| cpu_to_be32(SHA224_H4), cpu_to_be32(SHA224_H5), |
| cpu_to_be32(SHA224_H6), cpu_to_be32(SHA224_H7), |
| }; |
| |
| static const __be32 ccp_sha256_init[CCP_SHA_CTXSIZE / sizeof(__be32)] = { |
| cpu_to_be32(SHA256_H0), cpu_to_be32(SHA256_H1), |
| cpu_to_be32(SHA256_H2), cpu_to_be32(SHA256_H3), |
| cpu_to_be32(SHA256_H4), cpu_to_be32(SHA256_H5), |
| cpu_to_be32(SHA256_H6), cpu_to_be32(SHA256_H7), |
| }; |
| |
| /* The CCP cannot perform zero-length sha operations so the caller |
| * is required to buffer data for the final operation. However, a |
| * sha operation for a message with a total length of zero is valid |
| * so known values are required to supply the result. |
| */ |
| static const u8 ccp_sha1_zero[CCP_SHA_CTXSIZE] = { |
| 0xda, 0x39, 0xa3, 0xee, 0x5e, 0x6b, 0x4b, 0x0d, |
| 0x32, 0x55, 0xbf, 0xef, 0x95, 0x60, 0x18, 0x90, |
| 0xaf, 0xd8, 0x07, 0x09, 0x00, 0x00, 0x00, 0x00, |
| 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, |
| }; |
| |
| static const u8 ccp_sha224_zero[CCP_SHA_CTXSIZE] = { |
| 0xd1, 0x4a, 0x02, 0x8c, 0x2a, 0x3a, 0x2b, 0xc9, |
| 0x47, 0x61, 0x02, 0xbb, 0x28, 0x82, 0x34, 0xc4, |
| 0x15, 0xa2, 0xb0, 0x1f, 0x82, 0x8e, 0xa6, 0x2a, |
| 0xc5, 0xb3, 0xe4, 0x2f, 0x00, 0x00, 0x00, 0x00, |
| }; |
| |
| static const u8 ccp_sha256_zero[CCP_SHA_CTXSIZE] = { |
| 0xe3, 0xb0, 0xc4, 0x42, 0x98, 0xfc, 0x1c, 0x14, |
| 0x9a, 0xfb, 0xf4, 0xc8, 0x99, 0x6f, 0xb9, 0x24, |
| 0x27, 0xae, 0x41, 0xe4, 0x64, 0x9b, 0x93, 0x4c, |
| 0xa4, 0x95, 0x99, 0x1b, 0x78, 0x52, 0xb8, 0x55, |
| }; |
| |
| static u32 ccp_addr_lo(struct ccp_dma_info *info) |
| { |
| return lower_32_bits(info->address + info->offset); |
| } |
| |
| static u32 ccp_addr_hi(struct ccp_dma_info *info) |
| { |
| return upper_32_bits(info->address + info->offset) & 0x0000ffff; |
| } |
| |
| static int ccp_do_cmd(struct ccp_op *op, u32 *cr, unsigned int cr_count) |
| { |
| struct ccp_cmd_queue *cmd_q = op->cmd_q; |
| struct ccp_device *ccp = cmd_q->ccp; |
| void __iomem *cr_addr; |
| u32 cr0, cmd; |
| unsigned int i; |
| int ret = 0; |
| |
| /* We could read a status register to see how many free slots |
| * are actually available, but reading that register resets it |
| * and you could lose some error information. |
| */ |
| cmd_q->free_slots--; |
| |
| cr0 = (cmd_q->id << REQ0_CMD_Q_SHIFT) |
| | (op->jobid << REQ0_JOBID_SHIFT) |
| | REQ0_WAIT_FOR_WRITE; |
| |
| if (op->soc) |
| cr0 |= REQ0_STOP_ON_COMPLETE |
| | REQ0_INT_ON_COMPLETE; |
| |
| if (op->ioc || !cmd_q->free_slots) |
| cr0 |= REQ0_INT_ON_COMPLETE; |
| |
| /* Start at CMD_REQ1 */ |
| cr_addr = ccp->io_regs + CMD_REQ0 + CMD_REQ_INCR; |
| |
| mutex_lock(&ccp->req_mutex); |
| |
| /* Write CMD_REQ1 through CMD_REQx first */ |
| for (i = 0; i < cr_count; i++, cr_addr += CMD_REQ_INCR) |
| iowrite32(*(cr + i), cr_addr); |
| |
| /* Tell the CCP to start */ |
| wmb(); |
| iowrite32(cr0, ccp->io_regs + CMD_REQ0); |
| |
| mutex_unlock(&ccp->req_mutex); |
| |
| if (cr0 & REQ0_INT_ON_COMPLETE) { |
| /* Wait for the job to complete */ |
| ret = wait_event_interruptible(cmd_q->int_queue, |
| cmd_q->int_rcvd); |
| if (ret || cmd_q->cmd_error) { |
| /* On error delete all related jobs from the queue */ |
| cmd = (cmd_q->id << DEL_Q_ID_SHIFT) |
| | op->jobid; |
| |
| iowrite32(cmd, ccp->io_regs + DEL_CMD_Q_JOB); |
| |
| if (!ret) |
| ret = -EIO; |
| } else if (op->soc) { |
| /* Delete just head job from the queue on SoC */ |
| cmd = DEL_Q_ACTIVE |
| | (cmd_q->id << DEL_Q_ID_SHIFT) |
| | op->jobid; |
| |
| iowrite32(cmd, ccp->io_regs + DEL_CMD_Q_JOB); |
| } |
| |
| cmd_q->free_slots = CMD_Q_DEPTH(cmd_q->q_status); |
| |
| cmd_q->int_rcvd = 0; |
| } |
| |
| return ret; |
| } |
| |
| static int ccp_perform_aes(struct ccp_op *op) |
| { |
| u32 cr[6]; |
| |
| /* Fill out the register contents for REQ1 through REQ6 */ |
| cr[0] = (CCP_ENGINE_AES << REQ1_ENGINE_SHIFT) |
| | (op->u.aes.type << REQ1_AES_TYPE_SHIFT) |
| | (op->u.aes.mode << REQ1_AES_MODE_SHIFT) |
| | (op->u.aes.action << REQ1_AES_ACTION_SHIFT) |
| | (op->ksb_key << REQ1_KEY_KSB_SHIFT); |
| cr[1] = op->src.u.dma.length - 1; |
| cr[2] = ccp_addr_lo(&op->src.u.dma); |
| cr[3] = (op->ksb_ctx << REQ4_KSB_SHIFT) |
| | (CCP_MEMTYPE_SYSTEM << REQ4_MEMTYPE_SHIFT) |
| | ccp_addr_hi(&op->src.u.dma); |
| cr[4] = ccp_addr_lo(&op->dst.u.dma); |
| cr[5] = (CCP_MEMTYPE_SYSTEM << REQ6_MEMTYPE_SHIFT) |
| | ccp_addr_hi(&op->dst.u.dma); |
| |
| if (op->u.aes.mode == CCP_AES_MODE_CFB) |
| cr[0] |= ((0x7f) << REQ1_AES_CFB_SIZE_SHIFT); |
| |
| if (op->eom) |
| cr[0] |= REQ1_EOM; |
| |
| if (op->init) |
| cr[0] |= REQ1_INIT; |
| |
| return ccp_do_cmd(op, cr, ARRAY_SIZE(cr)); |
| } |
| |
| static int ccp_perform_xts_aes(struct ccp_op *op) |
| { |
| u32 cr[6]; |
| |
| /* Fill out the register contents for REQ1 through REQ6 */ |
| cr[0] = (CCP_ENGINE_XTS_AES_128 << REQ1_ENGINE_SHIFT) |
| | (op->u.xts.action << REQ1_AES_ACTION_SHIFT) |
| | (op->u.xts.unit_size << REQ1_XTS_AES_SIZE_SHIFT) |
| | (op->ksb_key << REQ1_KEY_KSB_SHIFT); |
| cr[1] = op->src.u.dma.length - 1; |
| cr[2] = ccp_addr_lo(&op->src.u.dma); |
| cr[3] = (op->ksb_ctx << REQ4_KSB_SHIFT) |
| | (CCP_MEMTYPE_SYSTEM << REQ4_MEMTYPE_SHIFT) |
| | ccp_addr_hi(&op->src.u.dma); |
| cr[4] = ccp_addr_lo(&op->dst.u.dma); |
| cr[5] = (CCP_MEMTYPE_SYSTEM << REQ6_MEMTYPE_SHIFT) |
| | ccp_addr_hi(&op->dst.u.dma); |
| |
| if (op->eom) |
| cr[0] |= REQ1_EOM; |
| |
| if (op->init) |
| cr[0] |= REQ1_INIT; |
| |
| return ccp_do_cmd(op, cr, ARRAY_SIZE(cr)); |
| } |
| |
| static int ccp_perform_sha(struct ccp_op *op) |
| { |
| u32 cr[6]; |
| |
| /* Fill out the register contents for REQ1 through REQ6 */ |
| cr[0] = (CCP_ENGINE_SHA << REQ1_ENGINE_SHIFT) |
| | (op->u.sha.type << REQ1_SHA_TYPE_SHIFT) |
| | REQ1_INIT; |
| cr[1] = op->src.u.dma.length - 1; |
| cr[2] = ccp_addr_lo(&op->src.u.dma); |
| cr[3] = (op->ksb_ctx << REQ4_KSB_SHIFT) |
| | (CCP_MEMTYPE_SYSTEM << REQ4_MEMTYPE_SHIFT) |
| | ccp_addr_hi(&op->src.u.dma); |
| |
| if (op->eom) { |
| cr[0] |= REQ1_EOM; |
| cr[4] = lower_32_bits(op->u.sha.msg_bits); |
| cr[5] = upper_32_bits(op->u.sha.msg_bits); |
| } else { |
| cr[4] = 0; |
| cr[5] = 0; |
| } |
| |
| return ccp_do_cmd(op, cr, ARRAY_SIZE(cr)); |
| } |
| |
| static int ccp_perform_rsa(struct ccp_op *op) |
| { |
| u32 cr[6]; |
| |
| /* Fill out the register contents for REQ1 through REQ6 */ |
| cr[0] = (CCP_ENGINE_RSA << REQ1_ENGINE_SHIFT) |
| | (op->u.rsa.mod_size << REQ1_RSA_MOD_SIZE_SHIFT) |
| | (op->ksb_key << REQ1_KEY_KSB_SHIFT) |
| | REQ1_EOM; |
| cr[1] = op->u.rsa.input_len - 1; |
| cr[2] = ccp_addr_lo(&op->src.u.dma); |
| cr[3] = (op->ksb_ctx << REQ4_KSB_SHIFT) |
| | (CCP_MEMTYPE_SYSTEM << REQ4_MEMTYPE_SHIFT) |
| | ccp_addr_hi(&op->src.u.dma); |
| cr[4] = ccp_addr_lo(&op->dst.u.dma); |
| cr[5] = (CCP_MEMTYPE_SYSTEM << REQ6_MEMTYPE_SHIFT) |
| | ccp_addr_hi(&op->dst.u.dma); |
| |
| return ccp_do_cmd(op, cr, ARRAY_SIZE(cr)); |
| } |
| |
| static int ccp_perform_passthru(struct ccp_op *op) |
| { |
| u32 cr[6]; |
| |
| /* Fill out the register contents for REQ1 through REQ6 */ |
| cr[0] = (CCP_ENGINE_PASSTHRU << REQ1_ENGINE_SHIFT) |
| | (op->u.passthru.bit_mod << REQ1_PT_BW_SHIFT) |
| | (op->u.passthru.byte_swap << REQ1_PT_BS_SHIFT); |
| |
| if (op->src.type == CCP_MEMTYPE_SYSTEM) |
| cr[1] = op->src.u.dma.length - 1; |
| else |
| cr[1] = op->dst.u.dma.length - 1; |
| |
| if (op->src.type == CCP_MEMTYPE_SYSTEM) { |
| cr[2] = ccp_addr_lo(&op->src.u.dma); |
| cr[3] = (CCP_MEMTYPE_SYSTEM << REQ4_MEMTYPE_SHIFT) |
| | ccp_addr_hi(&op->src.u.dma); |
| |
| if (op->u.passthru.bit_mod != CCP_PASSTHRU_BITWISE_NOOP) |
| cr[3] |= (op->ksb_key << REQ4_KSB_SHIFT); |
| } else { |
| cr[2] = op->src.u.ksb * CCP_KSB_BYTES; |
| cr[3] = (CCP_MEMTYPE_KSB << REQ4_MEMTYPE_SHIFT); |
| } |
| |
| if (op->dst.type == CCP_MEMTYPE_SYSTEM) { |
| cr[4] = ccp_addr_lo(&op->dst.u.dma); |
| cr[5] = (CCP_MEMTYPE_SYSTEM << REQ6_MEMTYPE_SHIFT) |
| | ccp_addr_hi(&op->dst.u.dma); |
| } else { |
| cr[4] = op->dst.u.ksb * CCP_KSB_BYTES; |
| cr[5] = (CCP_MEMTYPE_KSB << REQ6_MEMTYPE_SHIFT); |
| } |
| |
| if (op->eom) |
| cr[0] |= REQ1_EOM; |
| |
| return ccp_do_cmd(op, cr, ARRAY_SIZE(cr)); |
| } |
| |
| static int ccp_perform_ecc(struct ccp_op *op) |
| { |
| u32 cr[6]; |
| |
| /* Fill out the register contents for REQ1 through REQ6 */ |
| cr[0] = REQ1_ECC_AFFINE_CONVERT |
| | (CCP_ENGINE_ECC << REQ1_ENGINE_SHIFT) |
| | (op->u.ecc.function << REQ1_ECC_FUNCTION_SHIFT) |
| | REQ1_EOM; |
| cr[1] = op->src.u.dma.length - 1; |
| cr[2] = ccp_addr_lo(&op->src.u.dma); |
| cr[3] = (CCP_MEMTYPE_SYSTEM << REQ4_MEMTYPE_SHIFT) |
| | ccp_addr_hi(&op->src.u.dma); |
| cr[4] = ccp_addr_lo(&op->dst.u.dma); |
| cr[5] = (CCP_MEMTYPE_SYSTEM << REQ6_MEMTYPE_SHIFT) |
| | ccp_addr_hi(&op->dst.u.dma); |
| |
| return ccp_do_cmd(op, cr, ARRAY_SIZE(cr)); |
| } |
| |
| static u32 ccp_alloc_ksb(struct ccp_device *ccp, unsigned int count) |
| { |
| int start; |
| |
| for (;;) { |
| mutex_lock(&ccp->ksb_mutex); |
| |
| start = (u32)bitmap_find_next_zero_area(ccp->ksb, |
| ccp->ksb_count, |
| ccp->ksb_start, |
| count, 0); |
| if (start <= ccp->ksb_count) { |
| bitmap_set(ccp->ksb, start, count); |
| |
| mutex_unlock(&ccp->ksb_mutex); |
| break; |
| } |
| |
| ccp->ksb_avail = 0; |
| |
| mutex_unlock(&ccp->ksb_mutex); |
| |
| /* Wait for KSB entries to become available */ |
| if (wait_event_interruptible(ccp->ksb_queue, ccp->ksb_avail)) |
| return 0; |
| } |
| |
| return KSB_START + start; |
| } |
| |
| static void ccp_free_ksb(struct ccp_device *ccp, unsigned int start, |
| unsigned int count) |
| { |
| if (!start) |
| return; |
| |
| mutex_lock(&ccp->ksb_mutex); |
| |
| bitmap_clear(ccp->ksb, start - KSB_START, count); |
| |
| ccp->ksb_avail = 1; |
| |
| mutex_unlock(&ccp->ksb_mutex); |
| |
| wake_up_interruptible_all(&ccp->ksb_queue); |
| } |
| |
| static u32 ccp_gen_jobid(struct ccp_device *ccp) |
| { |
| return atomic_inc_return(&ccp->current_id) & CCP_JOBID_MASK; |
| } |
| |
| static void ccp_sg_free(struct ccp_sg_workarea *wa) |
| { |
| if (wa->dma_count) |
| dma_unmap_sg(wa->dma_dev, wa->dma_sg, wa->nents, wa->dma_dir); |
| |
| wa->dma_count = 0; |
| } |
| |
| static int ccp_init_sg_workarea(struct ccp_sg_workarea *wa, struct device *dev, |
| struct scatterlist *sg, u64 len, |
| enum dma_data_direction dma_dir) |
| { |
| memset(wa, 0, sizeof(*wa)); |
| |
| wa->sg = sg; |
| if (!sg) |
| return 0; |
| |
| wa->nents = sg_nents(sg); |
| wa->length = sg->length; |
| wa->bytes_left = len; |
| wa->sg_used = 0; |
| |
| if (len == 0) |
| return 0; |
| |
| if (dma_dir == DMA_NONE) |
| return 0; |
| |
| wa->dma_sg = sg; |
| wa->dma_dev = dev; |
| wa->dma_dir = dma_dir; |
| wa->dma_count = dma_map_sg(dev, sg, wa->nents, dma_dir); |
| if (!wa->dma_count) |
| return -ENOMEM; |
| |
| return 0; |
| } |
| |
| static void ccp_update_sg_workarea(struct ccp_sg_workarea *wa, unsigned int len) |
| { |
| unsigned int nbytes = min_t(u64, len, wa->bytes_left); |
| |
| if (!wa->sg) |
| return; |
| |
| wa->sg_used += nbytes; |
| wa->bytes_left -= nbytes; |
| if (wa->sg_used == wa->sg->length) { |
| wa->sg = sg_next(wa->sg); |
| wa->sg_used = 0; |
| } |
| } |
| |
| static void ccp_dm_free(struct ccp_dm_workarea *wa) |
| { |
| if (wa->length <= CCP_DMAPOOL_MAX_SIZE) { |
| if (wa->address) |
| dma_pool_free(wa->dma_pool, wa->address, |
| wa->dma.address); |
| } else { |
| if (wa->dma.address) |
| dma_unmap_single(wa->dev, wa->dma.address, wa->length, |
| wa->dma.dir); |
| kfree(wa->address); |
| } |
| |
| wa->address = NULL; |
| wa->dma.address = 0; |
| } |
| |
| static int ccp_init_dm_workarea(struct ccp_dm_workarea *wa, |
| struct ccp_cmd_queue *cmd_q, |
| unsigned int len, |
| enum dma_data_direction dir) |
| { |
| memset(wa, 0, sizeof(*wa)); |
| |
| if (!len) |
| return 0; |
| |
| wa->dev = cmd_q->ccp->dev; |
| wa->length = len; |
| |
| if (len <= CCP_DMAPOOL_MAX_SIZE) { |
| wa->dma_pool = cmd_q->dma_pool; |
| |
| wa->address = dma_pool_alloc(wa->dma_pool, GFP_KERNEL, |
| &wa->dma.address); |
| if (!wa->address) |
| return -ENOMEM; |
| |
| wa->dma.length = CCP_DMAPOOL_MAX_SIZE; |
| |
| memset(wa->address, 0, CCP_DMAPOOL_MAX_SIZE); |
| } else { |
| wa->address = kzalloc(len, GFP_KERNEL); |
| if (!wa->address) |
| return -ENOMEM; |
| |
| wa->dma.address = dma_map_single(wa->dev, wa->address, len, |
| dir); |
| if (!wa->dma.address) |
| return -ENOMEM; |
| |
| wa->dma.length = len; |
| } |
| wa->dma.dir = dir; |
| |
| return 0; |
| } |
| |
| static void ccp_set_dm_area(struct ccp_dm_workarea *wa, unsigned int wa_offset, |
| struct scatterlist *sg, unsigned int sg_offset, |
| unsigned int len) |
| { |
| WARN_ON(!wa->address); |
| |
| scatterwalk_map_and_copy(wa->address + wa_offset, sg, sg_offset, len, |
| 0); |
| } |
| |
| static void ccp_get_dm_area(struct ccp_dm_workarea *wa, unsigned int wa_offset, |
| struct scatterlist *sg, unsigned int sg_offset, |
| unsigned int len) |
| { |
| WARN_ON(!wa->address); |
| |
| scatterwalk_map_and_copy(wa->address + wa_offset, sg, sg_offset, len, |
| 1); |
| } |
| |
| static void ccp_reverse_set_dm_area(struct ccp_dm_workarea *wa, |
| struct scatterlist *sg, |
| unsigned int len, unsigned int se_len, |
| bool sign_extend) |
| { |
| unsigned int nbytes, sg_offset, dm_offset, ksb_len, i; |
| u8 buffer[CCP_REVERSE_BUF_SIZE]; |
| |
| BUG_ON(se_len > sizeof(buffer)); |
| |
| sg_offset = len; |
| dm_offset = 0; |
| nbytes = len; |
| while (nbytes) { |
| ksb_len = min_t(unsigned int, nbytes, se_len); |
| sg_offset -= ksb_len; |
| |
| scatterwalk_map_and_copy(buffer, sg, sg_offset, ksb_len, 0); |
| for (i = 0; i < ksb_len; i++) |
| wa->address[dm_offset + i] = buffer[ksb_len - i - 1]; |
| |
| dm_offset += ksb_len; |
| nbytes -= ksb_len; |
| |
| if ((ksb_len != se_len) && sign_extend) { |
| /* Must sign-extend to nearest sign-extend length */ |
| if (wa->address[dm_offset - 1] & 0x80) |
| memset(wa->address + dm_offset, 0xff, |
| se_len - ksb_len); |
| } |
| } |
| } |
| |
| static void ccp_reverse_get_dm_area(struct ccp_dm_workarea *wa, |
| struct scatterlist *sg, |
| unsigned int len) |
| { |
| unsigned int nbytes, sg_offset, dm_offset, ksb_len, i; |
| u8 buffer[CCP_REVERSE_BUF_SIZE]; |
| |
| sg_offset = 0; |
| dm_offset = len; |
| nbytes = len; |
| while (nbytes) { |
| ksb_len = min_t(unsigned int, nbytes, sizeof(buffer)); |
| dm_offset -= ksb_len; |
| |
| for (i = 0; i < ksb_len; i++) |
| buffer[ksb_len - i - 1] = wa->address[dm_offset + i]; |
| scatterwalk_map_and_copy(buffer, sg, sg_offset, ksb_len, 1); |
| |
| sg_offset += ksb_len; |
| nbytes -= ksb_len; |
| } |
| } |
| |
| static void ccp_free_data(struct ccp_data *data, struct ccp_cmd_queue *cmd_q) |
| { |
| ccp_dm_free(&data->dm_wa); |
| ccp_sg_free(&data->sg_wa); |
| } |
| |
| static int ccp_init_data(struct ccp_data *data, struct ccp_cmd_queue *cmd_q, |
| struct scatterlist *sg, u64 sg_len, |
| unsigned int dm_len, |
| enum dma_data_direction dir) |
| { |
| int ret; |
| |
| memset(data, 0, sizeof(*data)); |
| |
| ret = ccp_init_sg_workarea(&data->sg_wa, cmd_q->ccp->dev, sg, sg_len, |
| dir); |
| if (ret) |
| goto e_err; |
| |
| ret = ccp_init_dm_workarea(&data->dm_wa, cmd_q, dm_len, dir); |
| if (ret) |
| goto e_err; |
| |
| return 0; |
| |
| e_err: |
| ccp_free_data(data, cmd_q); |
| |
| return ret; |
| } |
| |
| static unsigned int ccp_queue_buf(struct ccp_data *data, unsigned int from) |
| { |
| struct ccp_sg_workarea *sg_wa = &data->sg_wa; |
| struct ccp_dm_workarea *dm_wa = &data->dm_wa; |
| unsigned int buf_count, nbytes; |
| |
| /* Clear the buffer if setting it */ |
| if (!from) |
| memset(dm_wa->address, 0, dm_wa->length); |
| |
| if (!sg_wa->sg) |
| return 0; |
| |
| /* Perform the copy operation |
| * nbytes will always be <= UINT_MAX because dm_wa->length is |
| * an unsigned int |
| */ |
| nbytes = min_t(u64, sg_wa->bytes_left, dm_wa->length); |
| scatterwalk_map_and_copy(dm_wa->address, sg_wa->sg, sg_wa->sg_used, |
| nbytes, from); |
| |
| /* Update the structures and generate the count */ |
| buf_count = 0; |
| while (sg_wa->bytes_left && (buf_count < dm_wa->length)) { |
| nbytes = min(sg_wa->sg->length - sg_wa->sg_used, |
| dm_wa->length - buf_count); |
| nbytes = min_t(u64, sg_wa->bytes_left, nbytes); |
| |
| buf_count += nbytes; |
| ccp_update_sg_workarea(sg_wa, nbytes); |
| } |
| |
| return buf_count; |
| } |
| |
| static unsigned int ccp_fill_queue_buf(struct ccp_data *data) |
| { |
| return ccp_queue_buf(data, 0); |
| } |
| |
| static unsigned int ccp_empty_queue_buf(struct ccp_data *data) |
| { |
| return ccp_queue_buf(data, 1); |
| } |
| |
| static void ccp_prepare_data(struct ccp_data *src, struct ccp_data *dst, |
| struct ccp_op *op, unsigned int block_size, |
| bool blocksize_op) |
| { |
| unsigned int sg_src_len, sg_dst_len, op_len; |
| |
| /* The CCP can only DMA from/to one address each per operation. This |
| * requires that we find the smallest DMA area between the source |
| * and destination. The resulting len values will always be <= UINT_MAX |
| * because the dma length is an unsigned int. |
| */ |
| sg_src_len = sg_dma_len(src->sg_wa.sg) - src->sg_wa.sg_used; |
| sg_src_len = min_t(u64, src->sg_wa.bytes_left, sg_src_len); |
| |
| if (dst) { |
| sg_dst_len = sg_dma_len(dst->sg_wa.sg) - dst->sg_wa.sg_used; |
| sg_dst_len = min_t(u64, src->sg_wa.bytes_left, sg_dst_len); |
| op_len = min(sg_src_len, sg_dst_len); |
| } else { |
| op_len = sg_src_len; |
| } |
| |
| /* The data operation length will be at least block_size in length |
| * or the smaller of available sg room remaining for the source or |
| * the destination |
| */ |
| op_len = max(op_len, block_size); |
| |
| /* Unless we have to buffer data, there's no reason to wait */ |
| op->soc = 0; |
| |
| if (sg_src_len < block_size) { |
| /* Not enough data in the sg element, so it |
| * needs to be buffered into a blocksize chunk |
| */ |
| int cp_len = ccp_fill_queue_buf(src); |
| |
| op->soc = 1; |
| op->src.u.dma.address = src->dm_wa.dma.address; |
| op->src.u.dma.offset = 0; |
| op->src.u.dma.length = (blocksize_op) ? block_size : cp_len; |
| } else { |
| /* Enough data in the sg element, but we need to |
| * adjust for any previously copied data |
| */ |
| op->src.u.dma.address = sg_dma_address(src->sg_wa.sg); |
| op->src.u.dma.offset = src->sg_wa.sg_used; |
| op->src.u.dma.length = op_len & ~(block_size - 1); |
| |
| ccp_update_sg_workarea(&src->sg_wa, op->src.u.dma.length); |
| } |
| |
| if (dst) { |
| if (sg_dst_len < block_size) { |
| /* Not enough room in the sg element or we're on the |
| * last piece of data (when using padding), so the |
| * output needs to be buffered into a blocksize chunk |
| */ |
| op->soc = 1; |
| op->dst.u.dma.address = dst->dm_wa.dma.address; |
| op->dst.u.dma.offset = 0; |
| op->dst.u.dma.length = op->src.u.dma.length; |
| } else { |
| /* Enough room in the sg element, but we need to |
| * adjust for any previously used area |
| */ |
| op->dst.u.dma.address = sg_dma_address(dst->sg_wa.sg); |
| op->dst.u.dma.offset = dst->sg_wa.sg_used; |
| op->dst.u.dma.length = op->src.u.dma.length; |
| } |
| } |
| } |
| |
| static void ccp_process_data(struct ccp_data *src, struct ccp_data *dst, |
| struct ccp_op *op) |
| { |
| op->init = 0; |
| |
| if (dst) { |
| if (op->dst.u.dma.address == dst->dm_wa.dma.address) |
| ccp_empty_queue_buf(dst); |
| else |
| ccp_update_sg_workarea(&dst->sg_wa, |
| op->dst.u.dma.length); |
| } |
| } |
| |
| static int ccp_copy_to_from_ksb(struct ccp_cmd_queue *cmd_q, |
| struct ccp_dm_workarea *wa, u32 jobid, u32 ksb, |
| u32 byte_swap, bool from) |
| { |
| struct ccp_op op; |
| |
| memset(&op, 0, sizeof(op)); |
| |
| op.cmd_q = cmd_q; |
| op.jobid = jobid; |
| op.eom = 1; |
| |
| if (from) { |
| op.soc = 1; |
| op.src.type = CCP_MEMTYPE_KSB; |
| op.src.u.ksb = ksb; |
| op.dst.type = CCP_MEMTYPE_SYSTEM; |
| op.dst.u.dma.address = wa->dma.address; |
| op.dst.u.dma.length = wa->length; |
| } else { |
| op.src.type = CCP_MEMTYPE_SYSTEM; |
| op.src.u.dma.address = wa->dma.address; |
| op.src.u.dma.length = wa->length; |
| op.dst.type = CCP_MEMTYPE_KSB; |
| op.dst.u.ksb = ksb; |
| } |
| |
| op.u.passthru.byte_swap = byte_swap; |
| |
| return ccp_perform_passthru(&op); |
| } |
| |
| static int ccp_copy_to_ksb(struct ccp_cmd_queue *cmd_q, |
| struct ccp_dm_workarea *wa, u32 jobid, u32 ksb, |
| u32 byte_swap) |
| { |
| return ccp_copy_to_from_ksb(cmd_q, wa, jobid, ksb, byte_swap, false); |
| } |
| |
| static int ccp_copy_from_ksb(struct ccp_cmd_queue *cmd_q, |
| struct ccp_dm_workarea *wa, u32 jobid, u32 ksb, |
| u32 byte_swap) |
| { |
| return ccp_copy_to_from_ksb(cmd_q, wa, jobid, ksb, byte_swap, true); |
| } |
| |
| static int ccp_run_aes_cmac_cmd(struct ccp_cmd_queue *cmd_q, |
| struct ccp_cmd *cmd) |
| { |
| struct ccp_aes_engine *aes = &cmd->u.aes; |
| struct ccp_dm_workarea key, ctx; |
| struct ccp_data src; |
| struct ccp_op op; |
| unsigned int dm_offset; |
| int ret; |
| |
| if (!((aes->key_len == AES_KEYSIZE_128) || |
| (aes->key_len == AES_KEYSIZE_192) || |
| (aes->key_len == AES_KEYSIZE_256))) |
| return -EINVAL; |
| |
| if (aes->src_len & (AES_BLOCK_SIZE - 1)) |
| return -EINVAL; |
| |
| if (aes->iv_len != AES_BLOCK_SIZE) |
| return -EINVAL; |
| |
| if (!aes->key || !aes->iv || !aes->src) |
| return -EINVAL; |
| |
| if (aes->cmac_final) { |
| if (aes->cmac_key_len != AES_BLOCK_SIZE) |
| return -EINVAL; |
| |
| if (!aes->cmac_key) |
| return -EINVAL; |
| } |
| |
| BUILD_BUG_ON(CCP_AES_KEY_KSB_COUNT != 1); |
| BUILD_BUG_ON(CCP_AES_CTX_KSB_COUNT != 1); |
| |
| ret = -EIO; |
| memset(&op, 0, sizeof(op)); |
| op.cmd_q = cmd_q; |
| op.jobid = ccp_gen_jobid(cmd_q->ccp); |
| op.ksb_key = cmd_q->ksb_key; |
| op.ksb_ctx = cmd_q->ksb_ctx; |
| op.init = 1; |
| op.u.aes.type = aes->type; |
| op.u.aes.mode = aes->mode; |
| op.u.aes.action = aes->action; |
| |
| /* All supported key sizes fit in a single (32-byte) KSB entry |
| * and must be in little endian format. Use the 256-bit byte |
| * swap passthru option to convert from big endian to little |
| * endian. |
| */ |
| ret = ccp_init_dm_workarea(&key, cmd_q, |
| CCP_AES_KEY_KSB_COUNT * CCP_KSB_BYTES, |
| DMA_TO_DEVICE); |
| if (ret) |
| return ret; |
| |
| dm_offset = CCP_KSB_BYTES - aes->key_len; |
| ccp_set_dm_area(&key, dm_offset, aes->key, 0, aes->key_len); |
| ret = ccp_copy_to_ksb(cmd_q, &key, op.jobid, op.ksb_key, |
| CCP_PASSTHRU_BYTESWAP_256BIT); |
| if (ret) { |
| cmd->engine_error = cmd_q->cmd_error; |
| goto e_key; |
| } |
| |
| /* The AES context fits in a single (32-byte) KSB entry and |
| * must be in little endian format. Use the 256-bit byte swap |
| * passthru option to convert from big endian to little endian. |
| */ |
| ret = ccp_init_dm_workarea(&ctx, cmd_q, |
| CCP_AES_CTX_KSB_COUNT * CCP_KSB_BYTES, |
| DMA_BIDIRECTIONAL); |
| if (ret) |
| goto e_key; |
| |
| dm_offset = CCP_KSB_BYTES - AES_BLOCK_SIZE; |
| ccp_set_dm_area(&ctx, dm_offset, aes->iv, 0, aes->iv_len); |
| ret = ccp_copy_to_ksb(cmd_q, &ctx, op.jobid, op.ksb_ctx, |
| CCP_PASSTHRU_BYTESWAP_256BIT); |
| if (ret) { |
| cmd->engine_error = cmd_q->cmd_error; |
| goto e_ctx; |
| } |
| |
| /* Send data to the CCP AES engine */ |
| ret = ccp_init_data(&src, cmd_q, aes->src, aes->src_len, |
| AES_BLOCK_SIZE, DMA_TO_DEVICE); |
| if (ret) |
| goto e_ctx; |
| |
| while (src.sg_wa.bytes_left) { |
| ccp_prepare_data(&src, NULL, &op, AES_BLOCK_SIZE, true); |
| if (aes->cmac_final && !src.sg_wa.bytes_left) { |
| op.eom = 1; |
| |
| /* Push the K1/K2 key to the CCP now */ |
| ret = ccp_copy_from_ksb(cmd_q, &ctx, op.jobid, |
| op.ksb_ctx, |
| CCP_PASSTHRU_BYTESWAP_256BIT); |
| if (ret) { |
| cmd->engine_error = cmd_q->cmd_error; |
| goto e_src; |
| } |
| |
| ccp_set_dm_area(&ctx, 0, aes->cmac_key, 0, |
| aes->cmac_key_len); |
| ret = ccp_copy_to_ksb(cmd_q, &ctx, op.jobid, op.ksb_ctx, |
| CCP_PASSTHRU_BYTESWAP_256BIT); |
| if (ret) { |
| cmd->engine_error = cmd_q->cmd_error; |
| goto e_src; |
| } |
| } |
| |
| ret = ccp_perform_aes(&op); |
| if (ret) { |
| cmd->engine_error = cmd_q->cmd_error; |
| goto e_src; |
| } |
| |
| ccp_process_data(&src, NULL, &op); |
| } |
| |
| /* Retrieve the AES context - convert from LE to BE using |
| * 32-byte (256-bit) byteswapping |
| */ |
| ret = ccp_copy_from_ksb(cmd_q, &ctx, op.jobid, op.ksb_ctx, |
| CCP_PASSTHRU_BYTESWAP_256BIT); |
| if (ret) { |
| cmd->engine_error = cmd_q->cmd_error; |
| goto e_src; |
| } |
| |
| /* ...but we only need AES_BLOCK_SIZE bytes */ |
| dm_offset = CCP_KSB_BYTES - AES_BLOCK_SIZE; |
| ccp_get_dm_area(&ctx, dm_offset, aes->iv, 0, aes->iv_len); |
| |
| e_src: |
| ccp_free_data(&src, cmd_q); |
| |
| e_ctx: |
| ccp_dm_free(&ctx); |
| |
| e_key: |
| ccp_dm_free(&key); |
| |
| return ret; |
| } |
| |
| static int ccp_run_aes_cmd(struct ccp_cmd_queue *cmd_q, struct ccp_cmd *cmd) |
| { |
| struct ccp_aes_engine *aes = &cmd->u.aes; |
| struct ccp_dm_workarea key, ctx; |
| struct ccp_data src, dst; |
| struct ccp_op op; |
| unsigned int dm_offset; |
| bool in_place = false; |
| int ret; |
| |
| if (aes->mode == CCP_AES_MODE_CMAC) |
| return ccp_run_aes_cmac_cmd(cmd_q, cmd); |
| |
| if (!((aes->key_len == AES_KEYSIZE_128) || |
| (aes->key_len == AES_KEYSIZE_192) || |
| (aes->key_len == AES_KEYSIZE_256))) |
| return -EINVAL; |
| |
| if (((aes->mode == CCP_AES_MODE_ECB) || |
| (aes->mode == CCP_AES_MODE_CBC) || |
| (aes->mode == CCP_AES_MODE_CFB)) && |
| (aes->src_len & (AES_BLOCK_SIZE - 1))) |
| return -EINVAL; |
| |
| if (!aes->key || !aes->src || !aes->dst) |
| return -EINVAL; |
| |
| if (aes->mode != CCP_AES_MODE_ECB) { |
| if (aes->iv_len != AES_BLOCK_SIZE) |
| return -EINVAL; |
| |
| if (!aes->iv) |
| return -EINVAL; |
| } |
| |
| BUILD_BUG_ON(CCP_AES_KEY_KSB_COUNT != 1); |
| BUILD_BUG_ON(CCP_AES_CTX_KSB_COUNT != 1); |
| |
| ret = -EIO; |
| memset(&op, 0, sizeof(op)); |
| op.cmd_q = cmd_q; |
| op.jobid = ccp_gen_jobid(cmd_q->ccp); |
| op.ksb_key = cmd_q->ksb_key; |
| op.ksb_ctx = cmd_q->ksb_ctx; |
| op.init = (aes->mode == CCP_AES_MODE_ECB) ? 0 : 1; |
| op.u.aes.type = aes->type; |
| op.u.aes.mode = aes->mode; |
| op.u.aes.action = aes->action; |
| |
| /* All supported key sizes fit in a single (32-byte) KSB entry |
| * and must be in little endian format. Use the 256-bit byte |
| * swap passthru option to convert from big endian to little |
| * endian. |
| */ |
| ret = ccp_init_dm_workarea(&key, cmd_q, |
| CCP_AES_KEY_KSB_COUNT * CCP_KSB_BYTES, |
| DMA_TO_DEVICE); |
| if (ret) |
| return ret; |
| |
| dm_offset = CCP_KSB_BYTES - aes->key_len; |
| ccp_set_dm_area(&key, dm_offset, aes->key, 0, aes->key_len); |
| ret = ccp_copy_to_ksb(cmd_q, &key, op.jobid, op.ksb_key, |
| CCP_PASSTHRU_BYTESWAP_256BIT); |
| if (ret) { |
| cmd->engine_error = cmd_q->cmd_error; |
| goto e_key; |
| } |
| |
| /* The AES context fits in a single (32-byte) KSB entry and |
| * must be in little endian format. Use the 256-bit byte swap |
| * passthru option to convert from big endian to little endian. |
| */ |
| ret = ccp_init_dm_workarea(&ctx, cmd_q, |
| CCP_AES_CTX_KSB_COUNT * CCP_KSB_BYTES, |
| DMA_BIDIRECTIONAL); |
| if (ret) |
| goto e_key; |
| |
| if (aes->mode != CCP_AES_MODE_ECB) { |
| /* Load the AES context - conver to LE */ |
| dm_offset = CCP_KSB_BYTES - AES_BLOCK_SIZE; |
| ccp_set_dm_area(&ctx, dm_offset, aes->iv, 0, aes->iv_len); |
| ret = ccp_copy_to_ksb(cmd_q, &ctx, op.jobid, op.ksb_ctx, |
| CCP_PASSTHRU_BYTESWAP_256BIT); |
| if (ret) { |
| cmd->engine_error = cmd_q->cmd_error; |
| goto e_ctx; |
| } |
| } |
| |
| /* Prepare the input and output data workareas. For in-place |
| * operations we need to set the dma direction to BIDIRECTIONAL |
| * and copy the src workarea to the dst workarea. |
| */ |
| if (sg_virt(aes->src) == sg_virt(aes->dst)) |
| in_place = true; |
| |
| ret = ccp_init_data(&src, cmd_q, aes->src, aes->src_len, |
| AES_BLOCK_SIZE, |
| in_place ? DMA_BIDIRECTIONAL : DMA_TO_DEVICE); |
| if (ret) |
| goto e_ctx; |
| |
| if (in_place) { |
| dst = src; |
| } else { |
| ret = ccp_init_data(&dst, cmd_q, aes->dst, aes->src_len, |
| AES_BLOCK_SIZE, DMA_FROM_DEVICE); |
| if (ret) |
| goto e_src; |
| } |
| |
| /* Send data to the CCP AES engine */ |
| while (src.sg_wa.bytes_left) { |
| ccp_prepare_data(&src, &dst, &op, AES_BLOCK_SIZE, true); |
| if (!src.sg_wa.bytes_left) { |
| op.eom = 1; |
| |
| /* Since we don't retrieve the AES context in ECB |
| * mode we have to wait for the operation to complete |
| * on the last piece of data |
| */ |
| if (aes->mode == CCP_AES_MODE_ECB) |
| op.soc = 1; |
| } |
| |
| ret = ccp_perform_aes(&op); |
| if (ret) { |
| cmd->engine_error = cmd_q->cmd_error; |
| goto e_dst; |
| } |
| |
| ccp_process_data(&src, &dst, &op); |
| } |
| |
| if (aes->mode != CCP_AES_MODE_ECB) { |
| /* Retrieve the AES context - convert from LE to BE using |
| * 32-byte (256-bit) byteswapping |
| */ |
| ret = ccp_copy_from_ksb(cmd_q, &ctx, op.jobid, op.ksb_ctx, |
| CCP_PASSTHRU_BYTESWAP_256BIT); |
| if (ret) { |
| cmd->engine_error = cmd_q->cmd_error; |
| goto e_dst; |
| } |
| |
| /* ...but we only need AES_BLOCK_SIZE bytes */ |
| dm_offset = CCP_KSB_BYTES - AES_BLOCK_SIZE; |
| ccp_get_dm_area(&ctx, dm_offset, aes->iv, 0, aes->iv_len); |
| } |
| |
| e_dst: |
| if (!in_place) |
| ccp_free_data(&dst, cmd_q); |
| |
| e_src: |
| ccp_free_data(&src, cmd_q); |
| |
| e_ctx: |
| ccp_dm_free(&ctx); |
| |
| e_key: |
| ccp_dm_free(&key); |
| |
| return ret; |
| } |
| |
| static int ccp_run_xts_aes_cmd(struct ccp_cmd_queue *cmd_q, |
| struct ccp_cmd *cmd) |
| { |
| struct ccp_xts_aes_engine *xts = &cmd->u.xts; |
| struct ccp_dm_workarea key, ctx; |
| struct ccp_data src, dst; |
| struct ccp_op op; |
| unsigned int unit_size, dm_offset; |
| bool in_place = false; |
| int ret; |
| |
| switch (xts->unit_size) { |
| case CCP_XTS_AES_UNIT_SIZE_16: |
| unit_size = 16; |
| break; |
| case CCP_XTS_AES_UNIT_SIZE_512: |
| unit_size = 512; |
| break; |
| case CCP_XTS_AES_UNIT_SIZE_1024: |
| unit_size = 1024; |
| break; |
| case CCP_XTS_AES_UNIT_SIZE_2048: |
| unit_size = 2048; |
| break; |
| case CCP_XTS_AES_UNIT_SIZE_4096: |
| unit_size = 4096; |
| break; |
| |
| default: |
| return -EINVAL; |
| } |
| |
| if (xts->key_len != AES_KEYSIZE_128) |
| return -EINVAL; |
| |
| if (!xts->final && (xts->src_len & (AES_BLOCK_SIZE - 1))) |
| return -EINVAL; |
| |
| if (xts->iv_len != AES_BLOCK_SIZE) |
| return -EINVAL; |
| |
| if (!xts->key || !xts->iv || !xts->src || !xts->dst) |
| return -EINVAL; |
| |
| BUILD_BUG_ON(CCP_XTS_AES_KEY_KSB_COUNT != 1); |
| BUILD_BUG_ON(CCP_XTS_AES_CTX_KSB_COUNT != 1); |
| |
| ret = -EIO; |
| memset(&op, 0, sizeof(op)); |
| op.cmd_q = cmd_q; |
| op.jobid = ccp_gen_jobid(cmd_q->ccp); |
| op.ksb_key = cmd_q->ksb_key; |
| op.ksb_ctx = cmd_q->ksb_ctx; |
| op.init = 1; |
| op.u.xts.action = xts->action; |
| op.u.xts.unit_size = xts->unit_size; |
| |
| /* All supported key sizes fit in a single (32-byte) KSB entry |
| * and must be in little endian format. Use the 256-bit byte |
| * swap passthru option to convert from big endian to little |
| * endian. |
| */ |
| ret = ccp_init_dm_workarea(&key, cmd_q, |
| CCP_XTS_AES_KEY_KSB_COUNT * CCP_KSB_BYTES, |
| DMA_TO_DEVICE); |
| if (ret) |
| return ret; |
| |
| dm_offset = CCP_KSB_BYTES - AES_KEYSIZE_128; |
| ccp_set_dm_area(&key, dm_offset, xts->key, 0, xts->key_len); |
| ccp_set_dm_area(&key, 0, xts->key, dm_offset, xts->key_len); |
| ret = ccp_copy_to_ksb(cmd_q, &key, op.jobid, op.ksb_key, |
| CCP_PASSTHRU_BYTESWAP_256BIT); |
| if (ret) { |
| cmd->engine_error = cmd_q->cmd_error; |
| goto e_key; |
| } |
| |
| /* The AES context fits in a single (32-byte) KSB entry and |
| * for XTS is already in little endian format so no byte swapping |
| * is needed. |
| */ |
| ret = ccp_init_dm_workarea(&ctx, cmd_q, |
| CCP_XTS_AES_CTX_KSB_COUNT * CCP_KSB_BYTES, |
| DMA_BIDIRECTIONAL); |
| if (ret) |
| goto e_key; |
| |
| ccp_set_dm_area(&ctx, 0, xts->iv, 0, xts->iv_len); |
| ret = ccp_copy_to_ksb(cmd_q, &ctx, op.jobid, op.ksb_ctx, |
| CCP_PASSTHRU_BYTESWAP_NOOP); |
| if (ret) { |
| cmd->engine_error = cmd_q->cmd_error; |
| goto e_ctx; |
| } |
| |
| /* Prepare the input and output data workareas. For in-place |
| * operations we need to set the dma direction to BIDIRECTIONAL |
| * and copy the src workarea to the dst workarea. |
| */ |
| if (sg_virt(xts->src) == sg_virt(xts->dst)) |
| in_place = true; |
| |
| ret = ccp_init_data(&src, cmd_q, xts->src, xts->src_len, |
| unit_size, |
| in_place ? DMA_BIDIRECTIONAL : DMA_TO_DEVICE); |
| if (ret) |
| goto e_ctx; |
| |
| if (in_place) { |
| dst = src; |
| } else { |
| ret = ccp_init_data(&dst, cmd_q, xts->dst, xts->src_len, |
| unit_size, DMA_FROM_DEVICE); |
| if (ret) |
| goto e_src; |
| } |
| |
| /* Send data to the CCP AES engine */ |
| while (src.sg_wa.bytes_left) { |
| ccp_prepare_data(&src, &dst, &op, unit_size, true); |
| if (!src.sg_wa.bytes_left) |
| op.eom = 1; |
| |
| ret = ccp_perform_xts_aes(&op); |
| if (ret) { |
| cmd->engine_error = cmd_q->cmd_error; |
| goto e_dst; |
| } |
| |
| ccp_process_data(&src, &dst, &op); |
| } |
| |
| /* Retrieve the AES context - convert from LE to BE using |
| * 32-byte (256-bit) byteswapping |
| */ |
| ret = ccp_copy_from_ksb(cmd_q, &ctx, op.jobid, op.ksb_ctx, |
| CCP_PASSTHRU_BYTESWAP_256BIT); |
| if (ret) { |
| cmd->engine_error = cmd_q->cmd_error; |
| goto e_dst; |
| } |
| |
| /* ...but we only need AES_BLOCK_SIZE bytes */ |
| dm_offset = CCP_KSB_BYTES - AES_BLOCK_SIZE; |
| ccp_get_dm_area(&ctx, dm_offset, xts->iv, 0, xts->iv_len); |
| |
| e_dst: |
| if (!in_place) |
| ccp_free_data(&dst, cmd_q); |
| |
| e_src: |
| ccp_free_data(&src, cmd_q); |
| |
| e_ctx: |
| ccp_dm_free(&ctx); |
| |
| e_key: |
| ccp_dm_free(&key); |
| |
| return ret; |
| } |
| |
| static int ccp_run_sha_cmd(struct ccp_cmd_queue *cmd_q, struct ccp_cmd *cmd) |
| { |
| struct ccp_sha_engine *sha = &cmd->u.sha; |
| struct ccp_dm_workarea ctx; |
| struct ccp_data src; |
| struct ccp_op op; |
| int ret; |
| |
| if (sha->ctx_len != CCP_SHA_CTXSIZE) |
| return -EINVAL; |
| |
| if (!sha->ctx) |
| return -EINVAL; |
| |
| if (!sha->final && (sha->src_len & (CCP_SHA_BLOCKSIZE - 1))) |
| return -EINVAL; |
| |
| if (!sha->src_len) { |
| const u8 *sha_zero; |
| |
| /* Not final, just return */ |
| if (!sha->final) |
| return 0; |
| |
| /* CCP can't do a zero length sha operation so the caller |
| * must buffer the data. |
| */ |
| if (sha->msg_bits) |
| return -EINVAL; |
| |
| /* A sha operation for a message with a total length of zero, |
| * return known result. |
| */ |
| switch (sha->type) { |
| case CCP_SHA_TYPE_1: |
| sha_zero = ccp_sha1_zero; |
| break; |
| case CCP_SHA_TYPE_224: |
| sha_zero = ccp_sha224_zero; |
| break; |
| case CCP_SHA_TYPE_256: |
| sha_zero = ccp_sha256_zero; |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| scatterwalk_map_and_copy((void *)sha_zero, sha->ctx, 0, |
| sha->ctx_len, 1); |
| |
| return 0; |
| } |
| |
| if (!sha->src) |
| return -EINVAL; |
| |
| BUILD_BUG_ON(CCP_SHA_KSB_COUNT != 1); |
| |
| memset(&op, 0, sizeof(op)); |
| op.cmd_q = cmd_q; |
| op.jobid = ccp_gen_jobid(cmd_q->ccp); |
| op.ksb_ctx = cmd_q->ksb_ctx; |
| op.u.sha.type = sha->type; |
| op.u.sha.msg_bits = sha->msg_bits; |
| |
| /* The SHA context fits in a single (32-byte) KSB entry and |
| * must be in little endian format. Use the 256-bit byte swap |
| * passthru option to convert from big endian to little endian. |
| */ |
| ret = ccp_init_dm_workarea(&ctx, cmd_q, |
| CCP_SHA_KSB_COUNT * CCP_KSB_BYTES, |
| DMA_BIDIRECTIONAL); |
| if (ret) |
| return ret; |
| |
| if (sha->first) { |
| const __be32 *init; |
| |
| switch (sha->type) { |
| case CCP_SHA_TYPE_1: |
| init = ccp_sha1_init; |
| break; |
| case CCP_SHA_TYPE_224: |
| init = ccp_sha224_init; |
| break; |
| case CCP_SHA_TYPE_256: |
| init = ccp_sha256_init; |
| break; |
| default: |
| ret = -EINVAL; |
| goto e_ctx; |
| } |
| memcpy(ctx.address, init, CCP_SHA_CTXSIZE); |
| } else { |
| ccp_set_dm_area(&ctx, 0, sha->ctx, 0, sha->ctx_len); |
| } |
| |
| ret = ccp_copy_to_ksb(cmd_q, &ctx, op.jobid, op.ksb_ctx, |
| CCP_PASSTHRU_BYTESWAP_256BIT); |
| if (ret) { |
| cmd->engine_error = cmd_q->cmd_error; |
| goto e_ctx; |
| } |
| |
| /* Send data to the CCP SHA engine */ |
| ret = ccp_init_data(&src, cmd_q, sha->src, sha->src_len, |
| CCP_SHA_BLOCKSIZE, DMA_TO_DEVICE); |
| if (ret) |
| goto e_ctx; |
| |
| while (src.sg_wa.bytes_left) { |
| ccp_prepare_data(&src, NULL, &op, CCP_SHA_BLOCKSIZE, false); |
| if (sha->final && !src.sg_wa.bytes_left) |
| op.eom = 1; |
| |
| ret = ccp_perform_sha(&op); |
| if (ret) { |
| cmd->engine_error = cmd_q->cmd_error; |
| goto e_data; |
| } |
| |
| ccp_process_data(&src, NULL, &op); |
| } |
| |
| /* Retrieve the SHA context - convert from LE to BE using |
| * 32-byte (256-bit) byteswapping to BE |
| */ |
| ret = ccp_copy_from_ksb(cmd_q, &ctx, op.jobid, op.ksb_ctx, |
| CCP_PASSTHRU_BYTESWAP_256BIT); |
| if (ret) { |
| cmd->engine_error = cmd_q->cmd_error; |
| goto e_data; |
| } |
| |
| ccp_get_dm_area(&ctx, 0, sha->ctx, 0, sha->ctx_len); |
| |
| if (sha->final && sha->opad) { |
| /* HMAC operation, recursively perform final SHA */ |
| struct ccp_cmd hmac_cmd; |
| struct scatterlist sg; |
| u64 block_size, digest_size; |
| u8 *hmac_buf; |
| |
| switch (sha->type) { |
| case CCP_SHA_TYPE_1: |
| block_size = SHA1_BLOCK_SIZE; |
| digest_size = SHA1_DIGEST_SIZE; |
| break; |
| case CCP_SHA_TYPE_224: |
| block_size = SHA224_BLOCK_SIZE; |
| digest_size = SHA224_DIGEST_SIZE; |
| break; |
| case CCP_SHA_TYPE_256: |
| block_size = SHA256_BLOCK_SIZE; |
| digest_size = SHA256_DIGEST_SIZE; |
| break; |
| default: |
| ret = -EINVAL; |
| goto e_data; |
| } |
| |
| if (sha->opad_len != block_size) { |
| ret = -EINVAL; |
| goto e_data; |
| } |
| |
| hmac_buf = kmalloc(block_size + digest_size, GFP_KERNEL); |
| if (!hmac_buf) { |
| ret = -ENOMEM; |
| goto e_data; |
| } |
| sg_init_one(&sg, hmac_buf, block_size + digest_size); |
| |
| scatterwalk_map_and_copy(hmac_buf, sha->opad, 0, block_size, 0); |
| memcpy(hmac_buf + block_size, ctx.address, digest_size); |
| |
| memset(&hmac_cmd, 0, sizeof(hmac_cmd)); |
| hmac_cmd.engine = CCP_ENGINE_SHA; |
| hmac_cmd.u.sha.type = sha->type; |
| hmac_cmd.u.sha.ctx = sha->ctx; |
| hmac_cmd.u.sha.ctx_len = sha->ctx_len; |
| hmac_cmd.u.sha.src = &sg; |
| hmac_cmd.u.sha.src_len = block_size + digest_size; |
| hmac_cmd.u.sha.opad = NULL; |
| hmac_cmd.u.sha.opad_len = 0; |
| hmac_cmd.u.sha.first = 1; |
| hmac_cmd.u.sha.final = 1; |
| hmac_cmd.u.sha.msg_bits = (block_size + digest_size) << 3; |
| |
| ret = ccp_run_sha_cmd(cmd_q, &hmac_cmd); |
| if (ret) |
| cmd->engine_error = hmac_cmd.engine_error; |
| |
| kfree(hmac_buf); |
| } |
| |
| e_data: |
| ccp_free_data(&src, cmd_q); |
| |
| e_ctx: |
| ccp_dm_free(&ctx); |
| |
| return ret; |
| } |
| |
| static int ccp_run_rsa_cmd(struct ccp_cmd_queue *cmd_q, struct ccp_cmd *cmd) |
| { |
| struct ccp_rsa_engine *rsa = &cmd->u.rsa; |
| struct ccp_dm_workarea exp, src; |
| struct ccp_data dst; |
| struct ccp_op op; |
| unsigned int ksb_count, i_len, o_len; |
| int ret; |
| |
| if (rsa->key_size > CCP_RSA_MAX_WIDTH) |
| return -EINVAL; |
| |
| if (!rsa->exp || !rsa->mod || !rsa->src || !rsa->dst) |
| return -EINVAL; |
| |
| /* The RSA modulus must precede the message being acted upon, so |
| * it must be copied to a DMA area where the message and the |
| * modulus can be concatenated. Therefore the input buffer |
| * length required is twice the output buffer length (which |
| * must be a multiple of 256-bits). |
| */ |
| o_len = ((rsa->key_size + 255) / 256) * 32; |
| i_len = o_len * 2; |
| |
| ksb_count = o_len / CCP_KSB_BYTES; |
| |
| memset(&op, 0, sizeof(op)); |
| op.cmd_q = cmd_q; |
| op.jobid = ccp_gen_jobid(cmd_q->ccp); |
| op.ksb_key = ccp_alloc_ksb(cmd_q->ccp, ksb_count); |
| if (!op.ksb_key) |
| return -EIO; |
| |
| /* The RSA exponent may span multiple (32-byte) KSB entries and must |
| * be in little endian format. Reverse copy each 32-byte chunk |
| * of the exponent (En chunk to E0 chunk, E(n-1) chunk to E1 chunk) |
| * and each byte within that chunk and do not perform any byte swap |
| * operations on the passthru operation. |
| */ |
| ret = ccp_init_dm_workarea(&exp, cmd_q, o_len, DMA_TO_DEVICE); |
| if (ret) |
| goto e_ksb; |
| |
| ccp_reverse_set_dm_area(&exp, rsa->exp, rsa->exp_len, CCP_KSB_BYTES, |
| false); |
| ret = ccp_copy_to_ksb(cmd_q, &exp, op.jobid, op.ksb_key, |
| CCP_PASSTHRU_BYTESWAP_NOOP); |
| if (ret) { |
| cmd->engine_error = cmd_q->cmd_error; |
| goto e_exp; |
| } |
| |
| /* Concatenate the modulus and the message. Both the modulus and |
| * the operands must be in little endian format. Since the input |
| * is in big endian format it must be converted. |
| */ |
| ret = ccp_init_dm_workarea(&src, cmd_q, i_len, DMA_TO_DEVICE); |
| if (ret) |
| goto e_exp; |
| |
| ccp_reverse_set_dm_area(&src, rsa->mod, rsa->mod_len, CCP_KSB_BYTES, |
| false); |
| src.address += o_len; /* Adjust the address for the copy operation */ |
| ccp_reverse_set_dm_area(&src, rsa->src, rsa->src_len, CCP_KSB_BYTES, |
| false); |
| src.address -= o_len; /* Reset the address to original value */ |
| |
| /* Prepare the output area for the operation */ |
| ret = ccp_init_data(&dst, cmd_q, rsa->dst, rsa->mod_len, |
| o_len, DMA_FROM_DEVICE); |
| if (ret) |
| goto e_src; |
| |
| op.soc = 1; |
| op.src.u.dma.address = src.dma.address; |
| op.src.u.dma.offset = 0; |
| op.src.u.dma.length = i_len; |
| op.dst.u.dma.address = dst.dm_wa.dma.address; |
| op.dst.u.dma.offset = 0; |
| op.dst.u.dma.length = o_len; |
| |
| op.u.rsa.mod_size = rsa->key_size; |
| op.u.rsa.input_len = i_len; |
| |
| ret = ccp_perform_rsa(&op); |
| if (ret) { |
| cmd->engine_error = cmd_q->cmd_error; |
| goto e_dst; |
| } |
| |
| ccp_reverse_get_dm_area(&dst.dm_wa, rsa->dst, rsa->mod_len); |
| |
| e_dst: |
| ccp_free_data(&dst, cmd_q); |
| |
| e_src: |
| ccp_dm_free(&src); |
| |
| e_exp: |
| ccp_dm_free(&exp); |
| |
| e_ksb: |
| ccp_free_ksb(cmd_q->ccp, op.ksb_key, ksb_count); |
| |
| return ret; |
| } |
| |
| static int ccp_run_passthru_cmd(struct ccp_cmd_queue *cmd_q, |
| struct ccp_cmd *cmd) |
| { |
| struct ccp_passthru_engine *pt = &cmd->u.passthru; |
| struct ccp_dm_workarea mask; |
| struct ccp_data src, dst; |
| struct ccp_op op; |
| bool in_place = false; |
| unsigned int i; |
| int ret; |
| |
| if (!pt->final && (pt->src_len & (CCP_PASSTHRU_BLOCKSIZE - 1))) |
| return -EINVAL; |
| |
| if (!pt->src || !pt->dst) |
| return -EINVAL; |
| |
| if (pt->bit_mod != CCP_PASSTHRU_BITWISE_NOOP) { |
| if (pt->mask_len != CCP_PASSTHRU_MASKSIZE) |
| return -EINVAL; |
| if (!pt->mask) |
| return -EINVAL; |
| } |
| |
| BUILD_BUG_ON(CCP_PASSTHRU_KSB_COUNT != 1); |
| |
| memset(&op, 0, sizeof(op)); |
| op.cmd_q = cmd_q; |
| op.jobid = ccp_gen_jobid(cmd_q->ccp); |
| |
| if (pt->bit_mod != CCP_PASSTHRU_BITWISE_NOOP) { |
| /* Load the mask */ |
| op.ksb_key = cmd_q->ksb_key; |
| |
| ret = ccp_init_dm_workarea(&mask, cmd_q, |
| CCP_PASSTHRU_KSB_COUNT * |
| CCP_KSB_BYTES, |
| DMA_TO_DEVICE); |
| if (ret) |
| return ret; |
| |
| ccp_set_dm_area(&mask, 0, pt->mask, 0, pt->mask_len); |
| ret = ccp_copy_to_ksb(cmd_q, &mask, op.jobid, op.ksb_key, |
| CCP_PASSTHRU_BYTESWAP_NOOP); |
| if (ret) { |
| cmd->engine_error = cmd_q->cmd_error; |
| goto e_mask; |
| } |
| } |
| |
| /* Prepare the input and output data workareas. For in-place |
| * operations we need to set the dma direction to BIDIRECTIONAL |
| * and copy the src workarea to the dst workarea. |
| */ |
| if (sg_virt(pt->src) == sg_virt(pt->dst)) |
| in_place = true; |
| |
| ret = ccp_init_data(&src, cmd_q, pt->src, pt->src_len, |
| CCP_PASSTHRU_MASKSIZE, |
| in_place ? DMA_BIDIRECTIONAL : DMA_TO_DEVICE); |
| if (ret) |
| goto e_mask; |
| |
| if (in_place) { |
| dst = src; |
| } else { |
| ret = ccp_init_data(&dst, cmd_q, pt->dst, pt->src_len, |
| CCP_PASSTHRU_MASKSIZE, DMA_FROM_DEVICE); |
| if (ret) |
| goto e_src; |
| } |
| |
| /* Send data to the CCP Passthru engine |
| * Because the CCP engine works on a single source and destination |
| * dma address at a time, each entry in the source scatterlist |
| * (after the dma_map_sg call) must be less than or equal to the |
| * (remaining) length in the destination scatterlist entry and the |
| * length must be a multiple of CCP_PASSTHRU_BLOCKSIZE |
| */ |
| dst.sg_wa.sg_used = 0; |
| for (i = 1; i <= src.sg_wa.dma_count; i++) { |
| if (!dst.sg_wa.sg || |
| (dst.sg_wa.sg->length < src.sg_wa.sg->length)) { |
| ret = -EINVAL; |
| goto e_dst; |
| } |
| |
| if (i == src.sg_wa.dma_count) { |
| op.eom = 1; |
| op.soc = 1; |
| } |
| |
| op.src.type = CCP_MEMTYPE_SYSTEM; |
| op.src.u.dma.address = sg_dma_address(src.sg_wa.sg); |
| op.src.u.dma.offset = 0; |
| op.src.u.dma.length = sg_dma_len(src.sg_wa.sg); |
| |
| op.dst.type = CCP_MEMTYPE_SYSTEM; |
| op.dst.u.dma.address = sg_dma_address(dst.sg_wa.sg); |
| op.dst.u.dma.offset = dst.sg_wa.sg_used; |
| op.dst.u.dma.length = op.src.u.dma.length; |
| |
| ret = ccp_perform_passthru(&op); |
| if (ret) { |
| cmd->engine_error = cmd_q->cmd_error; |
| goto e_dst; |
| } |
| |
| dst.sg_wa.sg_used += src.sg_wa.sg->length; |
| if (dst.sg_wa.sg_used == dst.sg_wa.sg->length) { |
| dst.sg_wa.sg = sg_next(dst.sg_wa.sg); |
| dst.sg_wa.sg_used = 0; |
| } |
| src.sg_wa.sg = sg_next(src.sg_wa.sg); |
| } |
| |
| e_dst: |
| if (!in_place) |
| ccp_free_data(&dst, cmd_q); |
| |
| e_src: |
| ccp_free_data(&src, cmd_q); |
| |
| e_mask: |
| if (pt->bit_mod != CCP_PASSTHRU_BITWISE_NOOP) |
| ccp_dm_free(&mask); |
| |
| return ret; |
| } |
| |
| static int ccp_run_ecc_mm_cmd(struct ccp_cmd_queue *cmd_q, struct ccp_cmd *cmd) |
| { |
| struct ccp_ecc_engine *ecc = &cmd->u.ecc; |
| struct ccp_dm_workarea src, dst; |
| struct ccp_op op; |
| int ret; |
| u8 *save; |
| |
| if (!ecc->u.mm.operand_1 || |
| (ecc->u.mm.operand_1_len > CCP_ECC_MODULUS_BYTES)) |
| return -EINVAL; |
| |
| if (ecc->function != CCP_ECC_FUNCTION_MINV_384BIT) |
| if (!ecc->u.mm.operand_2 || |
| (ecc->u.mm.operand_2_len > CCP_ECC_MODULUS_BYTES)) |
| return -EINVAL; |
| |
| if (!ecc->u.mm.result || |
| (ecc->u.mm.result_len < CCP_ECC_MODULUS_BYTES)) |
| return -EINVAL; |
| |
| memset(&op, 0, sizeof(op)); |
| op.cmd_q = cmd_q; |
| op.jobid = ccp_gen_jobid(cmd_q->ccp); |
| |
| /* Concatenate the modulus and the operands. Both the modulus and |
| * the operands must be in little endian format. Since the input |
| * is in big endian format it must be converted and placed in a |
| * fixed length buffer. |
| */ |
| ret = ccp_init_dm_workarea(&src, cmd_q, CCP_ECC_SRC_BUF_SIZE, |
| DMA_TO_DEVICE); |
| if (ret) |
| return ret; |
| |
| /* Save the workarea address since it is updated in order to perform |
| * the concatenation |
| */ |
| save = src.address; |
| |
| /* Copy the ECC modulus */ |
| ccp_reverse_set_dm_area(&src, ecc->mod, ecc->mod_len, |
| CCP_ECC_OPERAND_SIZE, false); |
| src.address += CCP_ECC_OPERAND_SIZE; |
| |
| /* Copy the first operand */ |
| ccp_reverse_set_dm_area(&src, ecc->u.mm.operand_1, |
| ecc->u.mm.operand_1_len, |
| CCP_ECC_OPERAND_SIZE, false); |
| src.address += CCP_ECC_OPERAND_SIZE; |
| |
| if (ecc->function != CCP_ECC_FUNCTION_MINV_384BIT) { |
| /* Copy the second operand */ |
| ccp_reverse_set_dm_area(&src, ecc->u.mm.operand_2, |
| ecc->u.mm.operand_2_len, |
| CCP_ECC_OPERAND_SIZE, false); |
| src.address += CCP_ECC_OPERAND_SIZE; |
| } |
| |
| /* Restore the workarea address */ |
| src.address = save; |
| |
| /* Prepare the output area for the operation */ |
| ret = ccp_init_dm_workarea(&dst, cmd_q, CCP_ECC_DST_BUF_SIZE, |
| DMA_FROM_DEVICE); |
| if (ret) |
| goto e_src; |
| |
| op.soc = 1; |
| op.src.u.dma.address = src.dma.address; |
| op.src.u.dma.offset = 0; |
| op.src.u.dma.length = src.length; |
| op.dst.u.dma.address = dst.dma.address; |
| op.dst.u.dma.offset = 0; |
| op.dst.u.dma.length = dst.length; |
| |
| op.u.ecc.function = cmd->u.ecc.function; |
| |
| ret = ccp_perform_ecc(&op); |
| if (ret) { |
| cmd->engine_error = cmd_q->cmd_error; |
| goto e_dst; |
| } |
| |
| ecc->ecc_result = le16_to_cpup( |
| (const __le16 *)(dst.address + CCP_ECC_RESULT_OFFSET)); |
| if (!(ecc->ecc_result & CCP_ECC_RESULT_SUCCESS)) { |
| ret = -EIO; |
| goto e_dst; |
| } |
| |
| /* Save the ECC result */ |
| ccp_reverse_get_dm_area(&dst, ecc->u.mm.result, CCP_ECC_MODULUS_BYTES); |
| |
| e_dst: |
| ccp_dm_free(&dst); |
| |
| e_src: |
| ccp_dm_free(&src); |
| |
| return ret; |
| } |
| |
| static int ccp_run_ecc_pm_cmd(struct ccp_cmd_queue *cmd_q, struct ccp_cmd *cmd) |
| { |
| struct ccp_ecc_engine *ecc = &cmd->u.ecc; |
| struct ccp_dm_workarea src, dst; |
| struct ccp_op op; |
| int ret; |
| u8 *save; |
| |
| if (!ecc->u.pm.point_1.x || |
| (ecc->u.pm.point_1.x_len > CCP_ECC_MODULUS_BYTES) || |
| !ecc->u.pm.point_1.y || |
| (ecc->u.pm.point_1.y_len > CCP_ECC_MODULUS_BYTES)) |
| return -EINVAL; |
| |
| if (ecc->function == CCP_ECC_FUNCTION_PADD_384BIT) { |
| if (!ecc->u.pm.point_2.x || |
| (ecc->u.pm.point_2.x_len > CCP_ECC_MODULUS_BYTES) || |
| !ecc->u.pm.point_2.y || |
| (ecc->u.pm.point_2.y_len > CCP_ECC_MODULUS_BYTES)) |
| return -EINVAL; |
| } else { |
| if (!ecc->u.pm.domain_a || |
| (ecc->u.pm.domain_a_len > CCP_ECC_MODULUS_BYTES)) |
| return -EINVAL; |
| |
| if (ecc->function == CCP_ECC_FUNCTION_PMUL_384BIT) |
| if (!ecc->u.pm.scalar || |
| (ecc->u.pm.scalar_len > CCP_ECC_MODULUS_BYTES)) |
| return -EINVAL; |
| } |
| |
| if (!ecc->u.pm.result.x || |
| (ecc->u.pm.result.x_len < CCP_ECC_MODULUS_BYTES) || |
| !ecc->u.pm.result.y || |
| (ecc->u.pm.result.y_len < CCP_ECC_MODULUS_BYTES)) |
| return -EINVAL; |
| |
| memset(&op, 0, sizeof(op)); |
| op.cmd_q = cmd_q; |
| op.jobid = ccp_gen_jobid(cmd_q->ccp); |
| |
| /* Concatenate the modulus and the operands. Both the modulus and |
| * the operands must be in little endian format. Since the input |
| * is in big endian format it must be converted and placed in a |
| * fixed length buffer. |
| */ |
| ret = ccp_init_dm_workarea(&src, cmd_q, CCP_ECC_SRC_BUF_SIZE, |
| DMA_TO_DEVICE); |
| if (ret) |
| return ret; |
| |
| /* Save the workarea address since it is updated in order to perform |
| * the concatenation |
| */ |
| save = src.address; |
| |
| /* Copy the ECC modulus */ |
| ccp_reverse_set_dm_area(&src, ecc->mod, ecc->mod_len, |
| CCP_ECC_OPERAND_SIZE, false); |
| src.address += CCP_ECC_OPERAND_SIZE; |
| |
| /* Copy the first point X and Y coordinate */ |
| ccp_reverse_set_dm_area(&src, ecc->u.pm.point_1.x, |
| ecc->u.pm.point_1.x_len, |
| CCP_ECC_OPERAND_SIZE, false); |
| src.address += CCP_ECC_OPERAND_SIZE; |
| ccp_reverse_set_dm_area(&src, ecc->u.pm.point_1.y, |
| ecc->u.pm.point_1.y_len, |
| CCP_ECC_OPERAND_SIZE, false); |
| src.address += CCP_ECC_OPERAND_SIZE; |
| |
| /* Set the first point Z coordianate to 1 */ |
| *src.address = 0x01; |
| src.address += CCP_ECC_OPERAND_SIZE; |
| |
| if (ecc->function == CCP_ECC_FUNCTION_PADD_384BIT) { |
| /* Copy the second point X and Y coordinate */ |
| ccp_reverse_set_dm_area(&src, ecc->u.pm.point_2.x, |
| ecc->u.pm.point_2.x_len, |
| CCP_ECC_OPERAND_SIZE, false); |
| src.address += CCP_ECC_OPERAND_SIZE; |
| ccp_reverse_set_dm_area(&src, ecc->u.pm.point_2.y, |
| ecc->u.pm.point_2.y_len, |
| CCP_ECC_OPERAND_SIZE, false); |
| src.address += CCP_ECC_OPERAND_SIZE; |
| |
| /* Set the second point Z coordianate to 1 */ |
| *src.address = 0x01; |
| src.address += CCP_ECC_OPERAND_SIZE; |
| } else { |
| /* Copy the Domain "a" parameter */ |
| ccp_reverse_set_dm_area(&src, ecc->u.pm.domain_a, |
| ecc->u.pm.domain_a_len, |
| CCP_ECC_OPERAND_SIZE, false); |
| src.address += CCP_ECC_OPERAND_SIZE; |
| |
| if (ecc->function == CCP_ECC_FUNCTION_PMUL_384BIT) { |
| /* Copy the scalar value */ |
| ccp_reverse_set_dm_area(&src, ecc->u.pm.scalar, |
| ecc->u.pm.scalar_len, |
| CCP_ECC_OPERAND_SIZE, false); |
| src.address += CCP_ECC_OPERAND_SIZE; |
| } |
| } |
| |
| /* Restore the workarea address */ |
| src.address = save; |
| |
| /* Prepare the output area for the operation */ |
| ret = ccp_init_dm_workarea(&dst, cmd_q, CCP_ECC_DST_BUF_SIZE, |
| DMA_FROM_DEVICE); |
| if (ret) |
| goto e_src; |
| |
| op.soc = 1; |
| op.src.u.dma.address = src.dma.address; |
| op.src.u.dma.offset = 0; |
| op.src.u.dma.length = src.length; |
| op.dst.u.dma.address = dst.dma.address; |
| op.dst.u.dma.offset = 0; |
| op.dst.u.dma.length = dst.length; |
| |
| op.u.ecc.function = cmd->u.ecc.function; |
| |
| ret = ccp_perform_ecc(&op); |
| if (ret) { |
| cmd->engine_error = cmd_q->cmd_error; |
| goto e_dst; |
| } |
| |
| ecc->ecc_result = le16_to_cpup( |
| (const __le16 *)(dst.address + CCP_ECC_RESULT_OFFSET)); |
| if (!(ecc->ecc_result & CCP_ECC_RESULT_SUCCESS)) { |
| ret = -EIO; |
| goto e_dst; |
| } |
| |
| /* Save the workarea address since it is updated as we walk through |
| * to copy the point math result |
| */ |
| save = dst.address; |
| |
| /* Save the ECC result X and Y coordinates */ |
| ccp_reverse_get_dm_area(&dst, ecc->u.pm.result.x, |
| CCP_ECC_MODULUS_BYTES); |
| dst.address += CCP_ECC_OUTPUT_SIZE; |
| ccp_reverse_get_dm_area(&dst, ecc->u.pm.result.y, |
| CCP_ECC_MODULUS_BYTES); |
| dst.address += CCP_ECC_OUTPUT_SIZE; |
| |
| /* Restore the workarea address */ |
| dst.address = save; |
| |
| e_dst: |
| ccp_dm_free(&dst); |
| |
| e_src: |
| ccp_dm_free(&src); |
| |
| return ret; |
| } |
| |
| static int ccp_run_ecc_cmd(struct ccp_cmd_queue *cmd_q, struct ccp_cmd *cmd) |
| { |
| struct ccp_ecc_engine *ecc = &cmd->u.ecc; |
| |
| ecc->ecc_result = 0; |
| |
| if (!ecc->mod || |
| (ecc->mod_len > CCP_ECC_MODULUS_BYTES)) |
| return -EINVAL; |
| |
| switch (ecc->function) { |
| case CCP_ECC_FUNCTION_MMUL_384BIT: |
| case CCP_ECC_FUNCTION_MADD_384BIT: |
| case CCP_ECC_FUNCTION_MINV_384BIT: |
| return ccp_run_ecc_mm_cmd(cmd_q, cmd); |
| |
| case CCP_ECC_FUNCTION_PADD_384BIT: |
| case CCP_ECC_FUNCTION_PMUL_384BIT: |
| case CCP_ECC_FUNCTION_PDBL_384BIT: |
| return ccp_run_ecc_pm_cmd(cmd_q, cmd); |
| |
| default: |
| return -EINVAL; |
| } |
| } |
| |
| int ccp_run_cmd(struct ccp_cmd_queue *cmd_q, struct ccp_cmd *cmd) |
| { |
| int ret; |
| |
| cmd->engine_error = 0; |
| cmd_q->cmd_error = 0; |
| cmd_q->int_rcvd = 0; |
| cmd_q->free_slots = CMD_Q_DEPTH(ioread32(cmd_q->reg_status)); |
| |
| switch (cmd->engine) { |
| case CCP_ENGINE_AES: |
| ret = ccp_run_aes_cmd(cmd_q, cmd); |
| break; |
| case CCP_ENGINE_XTS_AES_128: |
| ret = ccp_run_xts_aes_cmd(cmd_q, cmd); |
| break; |
| case CCP_ENGINE_SHA: |
| ret = ccp_run_sha_cmd(cmd_q, cmd); |
| break; |
| case CCP_ENGINE_RSA: |
| ret = ccp_run_rsa_cmd(cmd_q, cmd); |
| break; |
| case CCP_ENGINE_PASSTHRU: |
| ret = ccp_run_passthru_cmd(cmd_q, cmd); |
| break; |
| case CCP_ENGINE_ECC: |
| ret = ccp_run_ecc_cmd(cmd_q, cmd); |
| break; |
| default: |
| ret = -EINVAL; |
| } |
| |
| return ret; |
| } |