| /* |
| * Afatech AF9013 demodulator driver |
| * |
| * Copyright (C) 2007 Antti Palosaari <crope@iki.fi> |
| * Copyright (C) 2011 Antti Palosaari <crope@iki.fi> |
| * |
| * Thanks to Afatech who kindly provided information. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. |
| * |
| */ |
| |
| #include "af9013_priv.h" |
| |
| /* Max transfer size done by I2C transfer functions */ |
| #define MAX_XFER_SIZE 64 |
| |
| struct af9013_state { |
| struct i2c_adapter *i2c; |
| struct dvb_frontend fe; |
| struct af9013_config config; |
| |
| /* tuner/demod RF and IF AGC limits used for signal strength calc */ |
| u8 signal_strength_en, rf_50, rf_80, if_50, if_80; |
| u16 signal_strength; |
| u32 ber; |
| u32 ucblocks; |
| u16 snr; |
| u32 bandwidth_hz; |
| fe_status_t fe_status; |
| unsigned long set_frontend_jiffies; |
| unsigned long read_status_jiffies; |
| bool first_tune; |
| bool i2c_gate_state; |
| unsigned int statistics_step:3; |
| struct delayed_work statistics_work; |
| }; |
| |
| /* write multiple registers */ |
| static int af9013_wr_regs_i2c(struct af9013_state *priv, u8 mbox, u16 reg, |
| const u8 *val, int len) |
| { |
| int ret; |
| u8 buf[MAX_XFER_SIZE]; |
| struct i2c_msg msg[1] = { |
| { |
| .addr = priv->config.i2c_addr, |
| .flags = 0, |
| .len = 3 + len, |
| .buf = buf, |
| } |
| }; |
| |
| if (3 + len > sizeof(buf)) { |
| dev_warn(&priv->i2c->dev, |
| "%s: i2c wr reg=%04x: len=%d is too big!\n", |
| KBUILD_MODNAME, reg, len); |
| return -EINVAL; |
| } |
| |
| buf[0] = (reg >> 8) & 0xff; |
| buf[1] = (reg >> 0) & 0xff; |
| buf[2] = mbox; |
| memcpy(&buf[3], val, len); |
| |
| ret = i2c_transfer(priv->i2c, msg, 1); |
| if (ret == 1) { |
| ret = 0; |
| } else { |
| dev_warn(&priv->i2c->dev, "%s: i2c wr failed=%d reg=%04x " \ |
| "len=%d\n", KBUILD_MODNAME, ret, reg, len); |
| ret = -EREMOTEIO; |
| } |
| return ret; |
| } |
| |
| /* read multiple registers */ |
| static int af9013_rd_regs_i2c(struct af9013_state *priv, u8 mbox, u16 reg, |
| u8 *val, int len) |
| { |
| int ret; |
| u8 buf[3]; |
| struct i2c_msg msg[2] = { |
| { |
| .addr = priv->config.i2c_addr, |
| .flags = 0, |
| .len = 3, |
| .buf = buf, |
| }, { |
| .addr = priv->config.i2c_addr, |
| .flags = I2C_M_RD, |
| .len = len, |
| .buf = val, |
| } |
| }; |
| |
| buf[0] = (reg >> 8) & 0xff; |
| buf[1] = (reg >> 0) & 0xff; |
| buf[2] = mbox; |
| |
| ret = i2c_transfer(priv->i2c, msg, 2); |
| if (ret == 2) { |
| ret = 0; |
| } else { |
| dev_warn(&priv->i2c->dev, "%s: i2c rd failed=%d reg=%04x " \ |
| "len=%d\n", KBUILD_MODNAME, ret, reg, len); |
| ret = -EREMOTEIO; |
| } |
| return ret; |
| } |
| |
| /* write multiple registers */ |
| static int af9013_wr_regs(struct af9013_state *priv, u16 reg, const u8 *val, |
| int len) |
| { |
| int ret, i; |
| u8 mbox = (0 << 7)|(0 << 6)|(1 << 1)|(1 << 0); |
| |
| if ((priv->config.ts_mode == AF9013_TS_USB) && |
| ((reg & 0xff00) != 0xff00) && ((reg & 0xff00) != 0xae00)) { |
| mbox |= ((len - 1) << 2); |
| ret = af9013_wr_regs_i2c(priv, mbox, reg, val, len); |
| } else { |
| for (i = 0; i < len; i++) { |
| ret = af9013_wr_regs_i2c(priv, mbox, reg+i, val+i, 1); |
| if (ret) |
| goto err; |
| } |
| } |
| |
| err: |
| return 0; |
| } |
| |
| /* read multiple registers */ |
| static int af9013_rd_regs(struct af9013_state *priv, u16 reg, u8 *val, int len) |
| { |
| int ret, i; |
| u8 mbox = (0 << 7)|(0 << 6)|(1 << 1)|(0 << 0); |
| |
| if ((priv->config.ts_mode == AF9013_TS_USB) && |
| ((reg & 0xff00) != 0xff00) && ((reg & 0xff00) != 0xae00)) { |
| mbox |= ((len - 1) << 2); |
| ret = af9013_rd_regs_i2c(priv, mbox, reg, val, len); |
| } else { |
| for (i = 0; i < len; i++) { |
| ret = af9013_rd_regs_i2c(priv, mbox, reg+i, val+i, 1); |
| if (ret) |
| goto err; |
| } |
| } |
| |
| err: |
| return 0; |
| } |
| |
| /* write single register */ |
| static int af9013_wr_reg(struct af9013_state *priv, u16 reg, u8 val) |
| { |
| return af9013_wr_regs(priv, reg, &val, 1); |
| } |
| |
| /* read single register */ |
| static int af9013_rd_reg(struct af9013_state *priv, u16 reg, u8 *val) |
| { |
| return af9013_rd_regs(priv, reg, val, 1); |
| } |
| |
| static int af9013_write_ofsm_regs(struct af9013_state *state, u16 reg, u8 *val, |
| u8 len) |
| { |
| u8 mbox = (1 << 7)|(1 << 6)|((len - 1) << 2)|(1 << 1)|(1 << 0); |
| return af9013_wr_regs_i2c(state, mbox, reg, val, len); |
| } |
| |
| static int af9013_wr_reg_bits(struct af9013_state *state, u16 reg, int pos, |
| int len, u8 val) |
| { |
| int ret; |
| u8 tmp, mask; |
| |
| /* no need for read if whole reg is written */ |
| if (len != 8) { |
| ret = af9013_rd_reg(state, reg, &tmp); |
| if (ret) |
| return ret; |
| |
| mask = (0xff >> (8 - len)) << pos; |
| val <<= pos; |
| tmp &= ~mask; |
| val |= tmp; |
| } |
| |
| return af9013_wr_reg(state, reg, val); |
| } |
| |
| static int af9013_rd_reg_bits(struct af9013_state *state, u16 reg, int pos, |
| int len, u8 *val) |
| { |
| int ret; |
| u8 tmp; |
| |
| ret = af9013_rd_reg(state, reg, &tmp); |
| if (ret) |
| return ret; |
| |
| *val = (tmp >> pos); |
| *val &= (0xff >> (8 - len)); |
| |
| return 0; |
| } |
| |
| static int af9013_set_gpio(struct af9013_state *state, u8 gpio, u8 gpioval) |
| { |
| int ret; |
| u8 pos; |
| u16 addr; |
| |
| dev_dbg(&state->i2c->dev, "%s: gpio=%d gpioval=%02x\n", |
| __func__, gpio, gpioval); |
| |
| /* |
| * GPIO0 & GPIO1 0xd735 |
| * GPIO2 & GPIO3 0xd736 |
| */ |
| |
| switch (gpio) { |
| case 0: |
| case 1: |
| addr = 0xd735; |
| break; |
| case 2: |
| case 3: |
| addr = 0xd736; |
| break; |
| |
| default: |
| dev_err(&state->i2c->dev, "%s: invalid gpio=%d\n", |
| KBUILD_MODNAME, gpio); |
| ret = -EINVAL; |
| goto err; |
| } |
| |
| switch (gpio) { |
| case 0: |
| case 2: |
| pos = 0; |
| break; |
| case 1: |
| case 3: |
| default: |
| pos = 4; |
| break; |
| } |
| |
| ret = af9013_wr_reg_bits(state, addr, pos, 4, gpioval); |
| if (ret) |
| goto err; |
| |
| return ret; |
| err: |
| dev_dbg(&state->i2c->dev, "%s: failed=%d\n", __func__, ret); |
| return ret; |
| } |
| |
| static u32 af9013_div(struct af9013_state *state, u32 a, u32 b, u32 x) |
| { |
| u32 r = 0, c = 0, i; |
| |
| dev_dbg(&state->i2c->dev, "%s: a=%d b=%d x=%d\n", __func__, a, b, x); |
| |
| if (a > b) { |
| c = a / b; |
| a = a - c * b; |
| } |
| |
| for (i = 0; i < x; i++) { |
| if (a >= b) { |
| r += 1; |
| a -= b; |
| } |
| a <<= 1; |
| r <<= 1; |
| } |
| r = (c << (u32)x) + r; |
| |
| dev_dbg(&state->i2c->dev, "%s: a=%d b=%d x=%d r=%d r=%x\n", |
| __func__, a, b, x, r, r); |
| |
| return r; |
| } |
| |
| static int af9013_power_ctrl(struct af9013_state *state, u8 onoff) |
| { |
| int ret, i; |
| u8 tmp; |
| |
| dev_dbg(&state->i2c->dev, "%s: onoff=%d\n", __func__, onoff); |
| |
| /* enable reset */ |
| ret = af9013_wr_reg_bits(state, 0xd417, 4, 1, 1); |
| if (ret) |
| goto err; |
| |
| /* start reset mechanism */ |
| ret = af9013_wr_reg(state, 0xaeff, 1); |
| if (ret) |
| goto err; |
| |
| /* wait reset performs */ |
| for (i = 0; i < 150; i++) { |
| ret = af9013_rd_reg_bits(state, 0xd417, 1, 1, &tmp); |
| if (ret) |
| goto err; |
| |
| if (tmp) |
| break; /* reset done */ |
| |
| usleep_range(5000, 25000); |
| } |
| |
| if (!tmp) |
| return -ETIMEDOUT; |
| |
| if (onoff) { |
| /* clear reset */ |
| ret = af9013_wr_reg_bits(state, 0xd417, 1, 1, 0); |
| if (ret) |
| goto err; |
| |
| /* disable reset */ |
| ret = af9013_wr_reg_bits(state, 0xd417, 4, 1, 0); |
| |
| /* power on */ |
| ret = af9013_wr_reg_bits(state, 0xd73a, 3, 1, 0); |
| } else { |
| /* power off */ |
| ret = af9013_wr_reg_bits(state, 0xd73a, 3, 1, 1); |
| } |
| |
| return ret; |
| err: |
| dev_dbg(&state->i2c->dev, "%s: failed=%d\n", __func__, ret); |
| return ret; |
| } |
| |
| static int af9013_statistics_ber_unc_start(struct dvb_frontend *fe) |
| { |
| struct af9013_state *state = fe->demodulator_priv; |
| int ret; |
| |
| dev_dbg(&state->i2c->dev, "%s:\n", __func__); |
| |
| /* reset and start BER counter */ |
| ret = af9013_wr_reg_bits(state, 0xd391, 4, 1, 1); |
| if (ret) |
| goto err; |
| |
| return ret; |
| err: |
| dev_dbg(&state->i2c->dev, "%s: failed=%d\n", __func__, ret); |
| return ret; |
| } |
| |
| static int af9013_statistics_ber_unc_result(struct dvb_frontend *fe) |
| { |
| struct af9013_state *state = fe->demodulator_priv; |
| int ret; |
| u8 buf[5]; |
| |
| dev_dbg(&state->i2c->dev, "%s:\n", __func__); |
| |
| /* check if error bit count is ready */ |
| ret = af9013_rd_reg_bits(state, 0xd391, 4, 1, &buf[0]); |
| if (ret) |
| goto err; |
| |
| if (!buf[0]) { |
| dev_dbg(&state->i2c->dev, "%s: not ready\n", __func__); |
| return 0; |
| } |
| |
| ret = af9013_rd_regs(state, 0xd387, buf, 5); |
| if (ret) |
| goto err; |
| |
| state->ber = (buf[2] << 16) | (buf[1] << 8) | buf[0]; |
| state->ucblocks += (buf[4] << 8) | buf[3]; |
| |
| return ret; |
| err: |
| dev_dbg(&state->i2c->dev, "%s: failed=%d\n", __func__, ret); |
| return ret; |
| } |
| |
| static int af9013_statistics_snr_start(struct dvb_frontend *fe) |
| { |
| struct af9013_state *state = fe->demodulator_priv; |
| int ret; |
| |
| dev_dbg(&state->i2c->dev, "%s:\n", __func__); |
| |
| /* start SNR meas */ |
| ret = af9013_wr_reg_bits(state, 0xd2e1, 3, 1, 1); |
| if (ret) |
| goto err; |
| |
| return ret; |
| err: |
| dev_dbg(&state->i2c->dev, "%s: failed=%d\n", __func__, ret); |
| return ret; |
| } |
| |
| static int af9013_statistics_snr_result(struct dvb_frontend *fe) |
| { |
| struct af9013_state *state = fe->demodulator_priv; |
| int ret, i, len; |
| u8 buf[3], tmp; |
| u32 snr_val; |
| const struct af9013_snr *uninitialized_var(snr_lut); |
| |
| dev_dbg(&state->i2c->dev, "%s:\n", __func__); |
| |
| /* check if SNR ready */ |
| ret = af9013_rd_reg_bits(state, 0xd2e1, 3, 1, &tmp); |
| if (ret) |
| goto err; |
| |
| if (!tmp) { |
| dev_dbg(&state->i2c->dev, "%s: not ready\n", __func__); |
| return 0; |
| } |
| |
| /* read value */ |
| ret = af9013_rd_regs(state, 0xd2e3, buf, 3); |
| if (ret) |
| goto err; |
| |
| snr_val = (buf[2] << 16) | (buf[1] << 8) | buf[0]; |
| |
| /* read current modulation */ |
| ret = af9013_rd_reg(state, 0xd3c1, &tmp); |
| if (ret) |
| goto err; |
| |
| switch ((tmp >> 6) & 3) { |
| case 0: |
| len = ARRAY_SIZE(qpsk_snr_lut); |
| snr_lut = qpsk_snr_lut; |
| break; |
| case 1: |
| len = ARRAY_SIZE(qam16_snr_lut); |
| snr_lut = qam16_snr_lut; |
| break; |
| case 2: |
| len = ARRAY_SIZE(qam64_snr_lut); |
| snr_lut = qam64_snr_lut; |
| break; |
| default: |
| goto err; |
| } |
| |
| for (i = 0; i < len; i++) { |
| tmp = snr_lut[i].snr; |
| |
| if (snr_val < snr_lut[i].val) |
| break; |
| } |
| state->snr = tmp * 10; /* dB/10 */ |
| |
| return ret; |
| err: |
| dev_dbg(&state->i2c->dev, "%s: failed=%d\n", __func__, ret); |
| return ret; |
| } |
| |
| static int af9013_statistics_signal_strength(struct dvb_frontend *fe) |
| { |
| struct af9013_state *state = fe->demodulator_priv; |
| int ret = 0; |
| u8 buf[2], rf_gain, if_gain; |
| int signal_strength; |
| |
| dev_dbg(&state->i2c->dev, "%s:\n", __func__); |
| |
| if (!state->signal_strength_en) |
| return 0; |
| |
| ret = af9013_rd_regs(state, 0xd07c, buf, 2); |
| if (ret) |
| goto err; |
| |
| rf_gain = buf[0]; |
| if_gain = buf[1]; |
| |
| signal_strength = (0xffff / \ |
| (9 * (state->rf_50 + state->if_50) - \ |
| 11 * (state->rf_80 + state->if_80))) * \ |
| (10 * (rf_gain + if_gain) - \ |
| 11 * (state->rf_80 + state->if_80)); |
| if (signal_strength < 0) |
| signal_strength = 0; |
| else if (signal_strength > 0xffff) |
| signal_strength = 0xffff; |
| |
| state->signal_strength = signal_strength; |
| |
| return ret; |
| err: |
| dev_dbg(&state->i2c->dev, "%s: failed=%d\n", __func__, ret); |
| return ret; |
| } |
| |
| static void af9013_statistics_work(struct work_struct *work) |
| { |
| struct af9013_state *state = container_of(work, |
| struct af9013_state, statistics_work.work); |
| unsigned int next_msec; |
| |
| /* update only signal strength when demod is not locked */ |
| if (!(state->fe_status & FE_HAS_LOCK)) { |
| state->statistics_step = 0; |
| state->ber = 0; |
| state->snr = 0; |
| } |
| |
| switch (state->statistics_step) { |
| default: |
| state->statistics_step = 0; |
| case 0: |
| af9013_statistics_signal_strength(&state->fe); |
| state->statistics_step++; |
| next_msec = 300; |
| break; |
| case 1: |
| af9013_statistics_snr_start(&state->fe); |
| state->statistics_step++; |
| next_msec = 200; |
| break; |
| case 2: |
| af9013_statistics_ber_unc_start(&state->fe); |
| state->statistics_step++; |
| next_msec = 1000; |
| break; |
| case 3: |
| af9013_statistics_snr_result(&state->fe); |
| state->statistics_step++; |
| next_msec = 400; |
| break; |
| case 4: |
| af9013_statistics_ber_unc_result(&state->fe); |
| state->statistics_step++; |
| next_msec = 100; |
| break; |
| } |
| |
| schedule_delayed_work(&state->statistics_work, |
| msecs_to_jiffies(next_msec)); |
| } |
| |
| static int af9013_get_tune_settings(struct dvb_frontend *fe, |
| struct dvb_frontend_tune_settings *fesettings) |
| { |
| fesettings->min_delay_ms = 800; |
| fesettings->step_size = 0; |
| fesettings->max_drift = 0; |
| |
| return 0; |
| } |
| |
| static int af9013_set_frontend(struct dvb_frontend *fe) |
| { |
| struct af9013_state *state = fe->demodulator_priv; |
| struct dtv_frontend_properties *c = &fe->dtv_property_cache; |
| int ret, i, sampling_freq; |
| bool auto_mode, spec_inv; |
| u8 buf[6]; |
| u32 if_frequency, freq_cw; |
| |
| dev_dbg(&state->i2c->dev, "%s: frequency=%d bandwidth_hz=%d\n", |
| __func__, c->frequency, c->bandwidth_hz); |
| |
| /* program tuner */ |
| if (fe->ops.tuner_ops.set_params) |
| fe->ops.tuner_ops.set_params(fe); |
| |
| /* program CFOE coefficients */ |
| if (c->bandwidth_hz != state->bandwidth_hz) { |
| for (i = 0; i < ARRAY_SIZE(coeff_lut); i++) { |
| if (coeff_lut[i].clock == state->config.clock && |
| coeff_lut[i].bandwidth_hz == c->bandwidth_hz) { |
| break; |
| } |
| } |
| |
| ret = af9013_wr_regs(state, 0xae00, coeff_lut[i].val, |
| sizeof(coeff_lut[i].val)); |
| } |
| |
| /* program frequency control */ |
| if (c->bandwidth_hz != state->bandwidth_hz || state->first_tune) { |
| /* get used IF frequency */ |
| if (fe->ops.tuner_ops.get_if_frequency) |
| fe->ops.tuner_ops.get_if_frequency(fe, &if_frequency); |
| else |
| if_frequency = state->config.if_frequency; |
| |
| dev_dbg(&state->i2c->dev, "%s: if_frequency=%d\n", |
| __func__, if_frequency); |
| |
| sampling_freq = if_frequency; |
| |
| while (sampling_freq > (state->config.clock / 2)) |
| sampling_freq -= state->config.clock; |
| |
| if (sampling_freq < 0) { |
| sampling_freq *= -1; |
| spec_inv = state->config.spec_inv; |
| } else { |
| spec_inv = !state->config.spec_inv; |
| } |
| |
| freq_cw = af9013_div(state, sampling_freq, state->config.clock, |
| 23); |
| |
| if (spec_inv) |
| freq_cw = 0x800000 - freq_cw; |
| |
| buf[0] = (freq_cw >> 0) & 0xff; |
| buf[1] = (freq_cw >> 8) & 0xff; |
| buf[2] = (freq_cw >> 16) & 0x7f; |
| |
| freq_cw = 0x800000 - freq_cw; |
| |
| buf[3] = (freq_cw >> 0) & 0xff; |
| buf[4] = (freq_cw >> 8) & 0xff; |
| buf[5] = (freq_cw >> 16) & 0x7f; |
| |
| ret = af9013_wr_regs(state, 0xd140, buf, 3); |
| if (ret) |
| goto err; |
| |
| ret = af9013_wr_regs(state, 0x9be7, buf, 6); |
| if (ret) |
| goto err; |
| } |
| |
| /* clear TPS lock flag */ |
| ret = af9013_wr_reg_bits(state, 0xd330, 3, 1, 1); |
| if (ret) |
| goto err; |
| |
| /* clear MPEG2 lock flag */ |
| ret = af9013_wr_reg_bits(state, 0xd507, 6, 1, 0); |
| if (ret) |
| goto err; |
| |
| /* empty channel function */ |
| ret = af9013_wr_reg_bits(state, 0x9bfe, 0, 1, 0); |
| if (ret) |
| goto err; |
| |
| /* empty DVB-T channel function */ |
| ret = af9013_wr_reg_bits(state, 0x9bc2, 0, 1, 0); |
| if (ret) |
| goto err; |
| |
| /* transmission parameters */ |
| auto_mode = false; |
| memset(buf, 0, 3); |
| |
| switch (c->transmission_mode) { |
| case TRANSMISSION_MODE_AUTO: |
| auto_mode = true; |
| break; |
| case TRANSMISSION_MODE_2K: |
| break; |
| case TRANSMISSION_MODE_8K: |
| buf[0] |= (1 << 0); |
| break; |
| default: |
| dev_dbg(&state->i2c->dev, "%s: invalid transmission_mode\n", |
| __func__); |
| auto_mode = true; |
| } |
| |
| switch (c->guard_interval) { |
| case GUARD_INTERVAL_AUTO: |
| auto_mode = true; |
| break; |
| case GUARD_INTERVAL_1_32: |
| break; |
| case GUARD_INTERVAL_1_16: |
| buf[0] |= (1 << 2); |
| break; |
| case GUARD_INTERVAL_1_8: |
| buf[0] |= (2 << 2); |
| break; |
| case GUARD_INTERVAL_1_4: |
| buf[0] |= (3 << 2); |
| break; |
| default: |
| dev_dbg(&state->i2c->dev, "%s: invalid guard_interval\n", |
| __func__); |
| auto_mode = true; |
| } |
| |
| switch (c->hierarchy) { |
| case HIERARCHY_AUTO: |
| auto_mode = true; |
| break; |
| case HIERARCHY_NONE: |
| break; |
| case HIERARCHY_1: |
| buf[0] |= (1 << 4); |
| break; |
| case HIERARCHY_2: |
| buf[0] |= (2 << 4); |
| break; |
| case HIERARCHY_4: |
| buf[0] |= (3 << 4); |
| break; |
| default: |
| dev_dbg(&state->i2c->dev, "%s: invalid hierarchy\n", __func__); |
| auto_mode = true; |
| } |
| |
| switch (c->modulation) { |
| case QAM_AUTO: |
| auto_mode = true; |
| break; |
| case QPSK: |
| break; |
| case QAM_16: |
| buf[1] |= (1 << 6); |
| break; |
| case QAM_64: |
| buf[1] |= (2 << 6); |
| break; |
| default: |
| dev_dbg(&state->i2c->dev, "%s: invalid modulation\n", __func__); |
| auto_mode = true; |
| } |
| |
| /* Use HP. How and which case we can switch to LP? */ |
| buf[1] |= (1 << 4); |
| |
| switch (c->code_rate_HP) { |
| case FEC_AUTO: |
| auto_mode = true; |
| break; |
| case FEC_1_2: |
| break; |
| case FEC_2_3: |
| buf[2] |= (1 << 0); |
| break; |
| case FEC_3_4: |
| buf[2] |= (2 << 0); |
| break; |
| case FEC_5_6: |
| buf[2] |= (3 << 0); |
| break; |
| case FEC_7_8: |
| buf[2] |= (4 << 0); |
| break; |
| default: |
| dev_dbg(&state->i2c->dev, "%s: invalid code_rate_HP\n", |
| __func__); |
| auto_mode = true; |
| } |
| |
| switch (c->code_rate_LP) { |
| case FEC_AUTO: |
| auto_mode = true; |
| break; |
| case FEC_1_2: |
| break; |
| case FEC_2_3: |
| buf[2] |= (1 << 3); |
| break; |
| case FEC_3_4: |
| buf[2] |= (2 << 3); |
| break; |
| case FEC_5_6: |
| buf[2] |= (3 << 3); |
| break; |
| case FEC_7_8: |
| buf[2] |= (4 << 3); |
| break; |
| case FEC_NONE: |
| break; |
| default: |
| dev_dbg(&state->i2c->dev, "%s: invalid code_rate_LP\n", |
| __func__); |
| auto_mode = true; |
| } |
| |
| switch (c->bandwidth_hz) { |
| case 6000000: |
| break; |
| case 7000000: |
| buf[1] |= (1 << 2); |
| break; |
| case 8000000: |
| buf[1] |= (2 << 2); |
| break; |
| default: |
| dev_dbg(&state->i2c->dev, "%s: invalid bandwidth_hz\n", |
| __func__); |
| ret = -EINVAL; |
| goto err; |
| } |
| |
| ret = af9013_wr_regs(state, 0xd3c0, buf, 3); |
| if (ret) |
| goto err; |
| |
| if (auto_mode) { |
| /* clear easy mode flag */ |
| ret = af9013_wr_reg(state, 0xaefd, 0); |
| if (ret) |
| goto err; |
| |
| dev_dbg(&state->i2c->dev, "%s: auto params\n", __func__); |
| } else { |
| /* set easy mode flag */ |
| ret = af9013_wr_reg(state, 0xaefd, 1); |
| if (ret) |
| goto err; |
| |
| ret = af9013_wr_reg(state, 0xaefe, 0); |
| if (ret) |
| goto err; |
| |
| dev_dbg(&state->i2c->dev, "%s: manual params\n", __func__); |
| } |
| |
| /* tune */ |
| ret = af9013_wr_reg(state, 0xffff, 0); |
| if (ret) |
| goto err; |
| |
| state->bandwidth_hz = c->bandwidth_hz; |
| state->set_frontend_jiffies = jiffies; |
| state->first_tune = false; |
| |
| return ret; |
| err: |
| dev_dbg(&state->i2c->dev, "%s: failed=%d\n", __func__, ret); |
| return ret; |
| } |
| |
| static int af9013_get_frontend(struct dvb_frontend *fe) |
| { |
| struct dtv_frontend_properties *c = &fe->dtv_property_cache; |
| struct af9013_state *state = fe->demodulator_priv; |
| int ret; |
| u8 buf[3]; |
| |
| dev_dbg(&state->i2c->dev, "%s:\n", __func__); |
| |
| ret = af9013_rd_regs(state, 0xd3c0, buf, 3); |
| if (ret) |
| goto err; |
| |
| switch ((buf[1] >> 6) & 3) { |
| case 0: |
| c->modulation = QPSK; |
| break; |
| case 1: |
| c->modulation = QAM_16; |
| break; |
| case 2: |
| c->modulation = QAM_64; |
| break; |
| } |
| |
| switch ((buf[0] >> 0) & 3) { |
| case 0: |
| c->transmission_mode = TRANSMISSION_MODE_2K; |
| break; |
| case 1: |
| c->transmission_mode = TRANSMISSION_MODE_8K; |
| } |
| |
| switch ((buf[0] >> 2) & 3) { |
| case 0: |
| c->guard_interval = GUARD_INTERVAL_1_32; |
| break; |
| case 1: |
| c->guard_interval = GUARD_INTERVAL_1_16; |
| break; |
| case 2: |
| c->guard_interval = GUARD_INTERVAL_1_8; |
| break; |
| case 3: |
| c->guard_interval = GUARD_INTERVAL_1_4; |
| break; |
| } |
| |
| switch ((buf[0] >> 4) & 7) { |
| case 0: |
| c->hierarchy = HIERARCHY_NONE; |
| break; |
| case 1: |
| c->hierarchy = HIERARCHY_1; |
| break; |
| case 2: |
| c->hierarchy = HIERARCHY_2; |
| break; |
| case 3: |
| c->hierarchy = HIERARCHY_4; |
| break; |
| } |
| |
| switch ((buf[2] >> 0) & 7) { |
| case 0: |
| c->code_rate_HP = FEC_1_2; |
| break; |
| case 1: |
| c->code_rate_HP = FEC_2_3; |
| break; |
| case 2: |
| c->code_rate_HP = FEC_3_4; |
| break; |
| case 3: |
| c->code_rate_HP = FEC_5_6; |
| break; |
| case 4: |
| c->code_rate_HP = FEC_7_8; |
| break; |
| } |
| |
| switch ((buf[2] >> 3) & 7) { |
| case 0: |
| c->code_rate_LP = FEC_1_2; |
| break; |
| case 1: |
| c->code_rate_LP = FEC_2_3; |
| break; |
| case 2: |
| c->code_rate_LP = FEC_3_4; |
| break; |
| case 3: |
| c->code_rate_LP = FEC_5_6; |
| break; |
| case 4: |
| c->code_rate_LP = FEC_7_8; |
| break; |
| } |
| |
| switch ((buf[1] >> 2) & 3) { |
| case 0: |
| c->bandwidth_hz = 6000000; |
| break; |
| case 1: |
| c->bandwidth_hz = 7000000; |
| break; |
| case 2: |
| c->bandwidth_hz = 8000000; |
| break; |
| } |
| |
| return ret; |
| err: |
| dev_dbg(&state->i2c->dev, "%s: failed=%d\n", __func__, ret); |
| return ret; |
| } |
| |
| static int af9013_read_status(struct dvb_frontend *fe, fe_status_t *status) |
| { |
| struct af9013_state *state = fe->demodulator_priv; |
| int ret; |
| u8 tmp; |
| |
| /* |
| * Return status from the cache if it is younger than 2000ms with the |
| * exception of last tune is done during 4000ms. |
| */ |
| if (time_is_after_jiffies( |
| state->read_status_jiffies + msecs_to_jiffies(2000)) && |
| time_is_before_jiffies( |
| state->set_frontend_jiffies + msecs_to_jiffies(4000)) |
| ) { |
| *status = state->fe_status; |
| return 0; |
| } else { |
| *status = 0; |
| } |
| |
| /* MPEG2 lock */ |
| ret = af9013_rd_reg_bits(state, 0xd507, 6, 1, &tmp); |
| if (ret) |
| goto err; |
| |
| if (tmp) |
| *status |= FE_HAS_SIGNAL | FE_HAS_CARRIER | FE_HAS_VITERBI | |
| FE_HAS_SYNC | FE_HAS_LOCK; |
| |
| if (!*status) { |
| /* TPS lock */ |
| ret = af9013_rd_reg_bits(state, 0xd330, 3, 1, &tmp); |
| if (ret) |
| goto err; |
| |
| if (tmp) |
| *status |= FE_HAS_SIGNAL | FE_HAS_CARRIER | |
| FE_HAS_VITERBI; |
| } |
| |
| state->fe_status = *status; |
| state->read_status_jiffies = jiffies; |
| |
| return ret; |
| err: |
| dev_dbg(&state->i2c->dev, "%s: failed=%d\n", __func__, ret); |
| return ret; |
| } |
| |
| static int af9013_read_snr(struct dvb_frontend *fe, u16 *snr) |
| { |
| struct af9013_state *state = fe->demodulator_priv; |
| *snr = state->snr; |
| return 0; |
| } |
| |
| static int af9013_read_signal_strength(struct dvb_frontend *fe, u16 *strength) |
| { |
| struct af9013_state *state = fe->demodulator_priv; |
| *strength = state->signal_strength; |
| return 0; |
| } |
| |
| static int af9013_read_ber(struct dvb_frontend *fe, u32 *ber) |
| { |
| struct af9013_state *state = fe->demodulator_priv; |
| *ber = state->ber; |
| return 0; |
| } |
| |
| static int af9013_read_ucblocks(struct dvb_frontend *fe, u32 *ucblocks) |
| { |
| struct af9013_state *state = fe->demodulator_priv; |
| *ucblocks = state->ucblocks; |
| return 0; |
| } |
| |
| static int af9013_init(struct dvb_frontend *fe) |
| { |
| struct af9013_state *state = fe->demodulator_priv; |
| int ret, i, len; |
| u8 buf[3], tmp; |
| u32 adc_cw; |
| const struct af9013_reg_bit *init; |
| |
| dev_dbg(&state->i2c->dev, "%s:\n", __func__); |
| |
| /* power on */ |
| ret = af9013_power_ctrl(state, 1); |
| if (ret) |
| goto err; |
| |
| /* enable ADC */ |
| ret = af9013_wr_reg(state, 0xd73a, 0xa4); |
| if (ret) |
| goto err; |
| |
| /* write API version to firmware */ |
| ret = af9013_wr_regs(state, 0x9bf2, state->config.api_version, 4); |
| if (ret) |
| goto err; |
| |
| /* program ADC control */ |
| switch (state->config.clock) { |
| case 28800000: /* 28.800 MHz */ |
| tmp = 0; |
| break; |
| case 20480000: /* 20.480 MHz */ |
| tmp = 1; |
| break; |
| case 28000000: /* 28.000 MHz */ |
| tmp = 2; |
| break; |
| case 25000000: /* 25.000 MHz */ |
| tmp = 3; |
| break; |
| default: |
| dev_err(&state->i2c->dev, "%s: invalid clock\n", |
| KBUILD_MODNAME); |
| return -EINVAL; |
| } |
| |
| adc_cw = af9013_div(state, state->config.clock, 1000000ul, 19); |
| buf[0] = (adc_cw >> 0) & 0xff; |
| buf[1] = (adc_cw >> 8) & 0xff; |
| buf[2] = (adc_cw >> 16) & 0xff; |
| |
| ret = af9013_wr_regs(state, 0xd180, buf, 3); |
| if (ret) |
| goto err; |
| |
| ret = af9013_wr_reg_bits(state, 0x9bd2, 0, 4, tmp); |
| if (ret) |
| goto err; |
| |
| /* set I2C master clock */ |
| ret = af9013_wr_reg(state, 0xd416, 0x14); |
| if (ret) |
| goto err; |
| |
| /* set 16 embx */ |
| ret = af9013_wr_reg_bits(state, 0xd700, 1, 1, 1); |
| if (ret) |
| goto err; |
| |
| /* set no trigger */ |
| ret = af9013_wr_reg_bits(state, 0xd700, 2, 1, 0); |
| if (ret) |
| goto err; |
| |
| /* set read-update bit for constellation */ |
| ret = af9013_wr_reg_bits(state, 0xd371, 1, 1, 1); |
| if (ret) |
| goto err; |
| |
| /* settings for mp2if */ |
| if (state->config.ts_mode == AF9013_TS_USB) { |
| /* AF9015 split PSB to 1.5k + 0.5k */ |
| ret = af9013_wr_reg_bits(state, 0xd50b, 2, 1, 1); |
| if (ret) |
| goto err; |
| } else { |
| /* AF9013 change the output bit to data7 */ |
| ret = af9013_wr_reg_bits(state, 0xd500, 3, 1, 1); |
| if (ret) |
| goto err; |
| |
| /* AF9013 set mpeg to full speed */ |
| ret = af9013_wr_reg_bits(state, 0xd502, 4, 1, 1); |
| if (ret) |
| goto err; |
| } |
| |
| ret = af9013_wr_reg_bits(state, 0xd520, 4, 1, 1); |
| if (ret) |
| goto err; |
| |
| /* load OFSM settings */ |
| dev_dbg(&state->i2c->dev, "%s: load ofsm settings\n", __func__); |
| len = ARRAY_SIZE(ofsm_init); |
| init = ofsm_init; |
| for (i = 0; i < len; i++) { |
| ret = af9013_wr_reg_bits(state, init[i].addr, init[i].pos, |
| init[i].len, init[i].val); |
| if (ret) |
| goto err; |
| } |
| |
| /* load tuner specific settings */ |
| dev_dbg(&state->i2c->dev, "%s: load tuner specific settings\n", |
| __func__); |
| switch (state->config.tuner) { |
| case AF9013_TUNER_MXL5003D: |
| len = ARRAY_SIZE(tuner_init_mxl5003d); |
| init = tuner_init_mxl5003d; |
| break; |
| case AF9013_TUNER_MXL5005D: |
| case AF9013_TUNER_MXL5005R: |
| case AF9013_TUNER_MXL5007T: |
| len = ARRAY_SIZE(tuner_init_mxl5005); |
| init = tuner_init_mxl5005; |
| break; |
| case AF9013_TUNER_ENV77H11D5: |
| len = ARRAY_SIZE(tuner_init_env77h11d5); |
| init = tuner_init_env77h11d5; |
| break; |
| case AF9013_TUNER_MT2060: |
| len = ARRAY_SIZE(tuner_init_mt2060); |
| init = tuner_init_mt2060; |
| break; |
| case AF9013_TUNER_MC44S803: |
| len = ARRAY_SIZE(tuner_init_mc44s803); |
| init = tuner_init_mc44s803; |
| break; |
| case AF9013_TUNER_QT1010: |
| case AF9013_TUNER_QT1010A: |
| len = ARRAY_SIZE(tuner_init_qt1010); |
| init = tuner_init_qt1010; |
| break; |
| case AF9013_TUNER_MT2060_2: |
| len = ARRAY_SIZE(tuner_init_mt2060_2); |
| init = tuner_init_mt2060_2; |
| break; |
| case AF9013_TUNER_TDA18271: |
| case AF9013_TUNER_TDA18218: |
| len = ARRAY_SIZE(tuner_init_tda18271); |
| init = tuner_init_tda18271; |
| break; |
| case AF9013_TUNER_UNKNOWN: |
| default: |
| len = ARRAY_SIZE(tuner_init_unknown); |
| init = tuner_init_unknown; |
| break; |
| } |
| |
| for (i = 0; i < len; i++) { |
| ret = af9013_wr_reg_bits(state, init[i].addr, init[i].pos, |
| init[i].len, init[i].val); |
| if (ret) |
| goto err; |
| } |
| |
| /* TS mode */ |
| ret = af9013_wr_reg_bits(state, 0xd500, 1, 2, state->config.ts_mode); |
| if (ret) |
| goto err; |
| |
| /* enable lock led */ |
| ret = af9013_wr_reg_bits(state, 0xd730, 0, 1, 1); |
| if (ret) |
| goto err; |
| |
| /* check if we support signal strength */ |
| if (!state->signal_strength_en) { |
| ret = af9013_rd_reg_bits(state, 0x9bee, 0, 1, |
| &state->signal_strength_en); |
| if (ret) |
| goto err; |
| } |
| |
| /* read values needed for signal strength calculation */ |
| if (state->signal_strength_en && !state->rf_50) { |
| ret = af9013_rd_reg(state, 0x9bbd, &state->rf_50); |
| if (ret) |
| goto err; |
| |
| ret = af9013_rd_reg(state, 0x9bd0, &state->rf_80); |
| if (ret) |
| goto err; |
| |
| ret = af9013_rd_reg(state, 0x9be2, &state->if_50); |
| if (ret) |
| goto err; |
| |
| ret = af9013_rd_reg(state, 0x9be4, &state->if_80); |
| if (ret) |
| goto err; |
| } |
| |
| /* SNR */ |
| ret = af9013_wr_reg(state, 0xd2e2, 1); |
| if (ret) |
| goto err; |
| |
| /* BER / UCB */ |
| buf[0] = (10000 >> 0) & 0xff; |
| buf[1] = (10000 >> 8) & 0xff; |
| ret = af9013_wr_regs(state, 0xd385, buf, 2); |
| if (ret) |
| goto err; |
| |
| /* enable FEC monitor */ |
| ret = af9013_wr_reg_bits(state, 0xd392, 1, 1, 1); |
| if (ret) |
| goto err; |
| |
| state->first_tune = true; |
| schedule_delayed_work(&state->statistics_work, msecs_to_jiffies(400)); |
| |
| return ret; |
| err: |
| dev_dbg(&state->i2c->dev, "%s: failed=%d\n", __func__, ret); |
| return ret; |
| } |
| |
| static int af9013_sleep(struct dvb_frontend *fe) |
| { |
| struct af9013_state *state = fe->demodulator_priv; |
| int ret; |
| |
| dev_dbg(&state->i2c->dev, "%s:\n", __func__); |
| |
| /* stop statistics polling */ |
| cancel_delayed_work_sync(&state->statistics_work); |
| |
| /* disable lock led */ |
| ret = af9013_wr_reg_bits(state, 0xd730, 0, 1, 0); |
| if (ret) |
| goto err; |
| |
| /* power off */ |
| ret = af9013_power_ctrl(state, 0); |
| if (ret) |
| goto err; |
| |
| return ret; |
| err: |
| dev_dbg(&state->i2c->dev, "%s: failed=%d\n", __func__, ret); |
| return ret; |
| } |
| |
| static int af9013_i2c_gate_ctrl(struct dvb_frontend *fe, int enable) |
| { |
| int ret; |
| struct af9013_state *state = fe->demodulator_priv; |
| |
| dev_dbg(&state->i2c->dev, "%s: enable=%d\n", __func__, enable); |
| |
| /* gate already open or close */ |
| if (state->i2c_gate_state == enable) |
| return 0; |
| |
| if (state->config.ts_mode == AF9013_TS_USB) |
| ret = af9013_wr_reg_bits(state, 0xd417, 3, 1, enable); |
| else |
| ret = af9013_wr_reg_bits(state, 0xd607, 2, 1, enable); |
| if (ret) |
| goto err; |
| |
| state->i2c_gate_state = enable; |
| |
| return ret; |
| err: |
| dev_dbg(&state->i2c->dev, "%s: failed=%d\n", __func__, ret); |
| return ret; |
| } |
| |
| static void af9013_release(struct dvb_frontend *fe) |
| { |
| struct af9013_state *state = fe->demodulator_priv; |
| kfree(state); |
| } |
| |
| static struct dvb_frontend_ops af9013_ops; |
| |
| static int af9013_download_firmware(struct af9013_state *state) |
| { |
| int i, len, remaining, ret; |
| const struct firmware *fw; |
| u16 checksum = 0; |
| u8 val; |
| u8 fw_params[4]; |
| u8 *fw_file = AF9013_FIRMWARE; |
| |
| msleep(100); |
| /* check whether firmware is already running */ |
| ret = af9013_rd_reg(state, 0x98be, &val); |
| if (ret) |
| goto err; |
| else |
| dev_dbg(&state->i2c->dev, "%s: firmware status=%02x\n", |
| __func__, val); |
| |
| if (val == 0x0c) /* fw is running, no need for download */ |
| goto exit; |
| |
| dev_info(&state->i2c->dev, "%s: found a '%s' in cold state, will try " \ |
| "to load a firmware\n", |
| KBUILD_MODNAME, af9013_ops.info.name); |
| |
| /* request the firmware, this will block and timeout */ |
| ret = request_firmware(&fw, fw_file, state->i2c->dev.parent); |
| if (ret) { |
| dev_info(&state->i2c->dev, "%s: did not find the firmware " \ |
| "file. (%s) Please see linux/Documentation/dvb/ for " \ |
| "more details on firmware-problems. (%d)\n", |
| KBUILD_MODNAME, fw_file, ret); |
| goto err; |
| } |
| |
| dev_info(&state->i2c->dev, "%s: downloading firmware from file '%s'\n", |
| KBUILD_MODNAME, fw_file); |
| |
| /* calc checksum */ |
| for (i = 0; i < fw->size; i++) |
| checksum += fw->data[i]; |
| |
| fw_params[0] = checksum >> 8; |
| fw_params[1] = checksum & 0xff; |
| fw_params[2] = fw->size >> 8; |
| fw_params[3] = fw->size & 0xff; |
| |
| /* write fw checksum & size */ |
| ret = af9013_write_ofsm_regs(state, 0x50fc, |
| fw_params, sizeof(fw_params)); |
| if (ret) |
| goto err_release; |
| |
| #define FW_ADDR 0x5100 /* firmware start address */ |
| #define LEN_MAX 16 /* max packet size */ |
| for (remaining = fw->size; remaining > 0; remaining -= LEN_MAX) { |
| len = remaining; |
| if (len > LEN_MAX) |
| len = LEN_MAX; |
| |
| ret = af9013_write_ofsm_regs(state, |
| FW_ADDR + fw->size - remaining, |
| (u8 *) &fw->data[fw->size - remaining], len); |
| if (ret) { |
| dev_err(&state->i2c->dev, |
| "%s: firmware download failed=%d\n", |
| KBUILD_MODNAME, ret); |
| goto err_release; |
| } |
| } |
| |
| /* request boot firmware */ |
| ret = af9013_wr_reg(state, 0xe205, 1); |
| if (ret) |
| goto err_release; |
| |
| for (i = 0; i < 15; i++) { |
| msleep(100); |
| |
| /* check firmware status */ |
| ret = af9013_rd_reg(state, 0x98be, &val); |
| if (ret) |
| goto err_release; |
| |
| dev_dbg(&state->i2c->dev, "%s: firmware status=%02x\n", |
| __func__, val); |
| |
| if (val == 0x0c || val == 0x04) /* success or fail */ |
| break; |
| } |
| |
| if (val == 0x04) { |
| dev_err(&state->i2c->dev, "%s: firmware did not run\n", |
| KBUILD_MODNAME); |
| ret = -ENODEV; |
| } else if (val != 0x0c) { |
| dev_err(&state->i2c->dev, "%s: firmware boot timeout\n", |
| KBUILD_MODNAME); |
| ret = -ENODEV; |
| } |
| |
| err_release: |
| release_firmware(fw); |
| err: |
| exit: |
| if (!ret) |
| dev_info(&state->i2c->dev, "%s: found a '%s' in warm state\n", |
| KBUILD_MODNAME, af9013_ops.info.name); |
| return ret; |
| } |
| |
| struct dvb_frontend *af9013_attach(const struct af9013_config *config, |
| struct i2c_adapter *i2c) |
| { |
| int ret; |
| struct af9013_state *state = NULL; |
| u8 buf[4], i; |
| |
| /* allocate memory for the internal state */ |
| state = kzalloc(sizeof(struct af9013_state), GFP_KERNEL); |
| if (state == NULL) |
| goto err; |
| |
| /* setup the state */ |
| state->i2c = i2c; |
| memcpy(&state->config, config, sizeof(struct af9013_config)); |
| |
| /* download firmware */ |
| if (state->config.ts_mode != AF9013_TS_USB) { |
| ret = af9013_download_firmware(state); |
| if (ret) |
| goto err; |
| } |
| |
| /* firmware version */ |
| ret = af9013_rd_regs(state, 0x5103, buf, 4); |
| if (ret) |
| goto err; |
| |
| dev_info(&state->i2c->dev, "%s: firmware version %d.%d.%d.%d\n", |
| KBUILD_MODNAME, buf[0], buf[1], buf[2], buf[3]); |
| |
| /* set GPIOs */ |
| for (i = 0; i < sizeof(state->config.gpio); i++) { |
| ret = af9013_set_gpio(state, i, state->config.gpio[i]); |
| if (ret) |
| goto err; |
| } |
| |
| /* create dvb_frontend */ |
| memcpy(&state->fe.ops, &af9013_ops, |
| sizeof(struct dvb_frontend_ops)); |
| state->fe.demodulator_priv = state; |
| |
| INIT_DELAYED_WORK(&state->statistics_work, af9013_statistics_work); |
| |
| return &state->fe; |
| err: |
| kfree(state); |
| return NULL; |
| } |
| EXPORT_SYMBOL(af9013_attach); |
| |
| static struct dvb_frontend_ops af9013_ops = { |
| .delsys = { SYS_DVBT }, |
| .info = { |
| .name = "Afatech AF9013", |
| .frequency_min = 174000000, |
| .frequency_max = 862000000, |
| .frequency_stepsize = 250000, |
| .frequency_tolerance = 0, |
| .caps = FE_CAN_FEC_1_2 | |
| FE_CAN_FEC_2_3 | |
| FE_CAN_FEC_3_4 | |
| FE_CAN_FEC_5_6 | |
| FE_CAN_FEC_7_8 | |
| FE_CAN_FEC_AUTO | |
| FE_CAN_QPSK | |
| FE_CAN_QAM_16 | |
| FE_CAN_QAM_64 | |
| FE_CAN_QAM_AUTO | |
| FE_CAN_TRANSMISSION_MODE_AUTO | |
| FE_CAN_GUARD_INTERVAL_AUTO | |
| FE_CAN_HIERARCHY_AUTO | |
| FE_CAN_RECOVER | |
| FE_CAN_MUTE_TS |
| }, |
| |
| .release = af9013_release, |
| |
| .init = af9013_init, |
| .sleep = af9013_sleep, |
| |
| .get_tune_settings = af9013_get_tune_settings, |
| .set_frontend = af9013_set_frontend, |
| .get_frontend = af9013_get_frontend, |
| |
| .read_status = af9013_read_status, |
| .read_snr = af9013_read_snr, |
| .read_signal_strength = af9013_read_signal_strength, |
| .read_ber = af9013_read_ber, |
| .read_ucblocks = af9013_read_ucblocks, |
| |
| .i2c_gate_ctrl = af9013_i2c_gate_ctrl, |
| }; |
| |
| MODULE_AUTHOR("Antti Palosaari <crope@iki.fi>"); |
| MODULE_DESCRIPTION("Afatech AF9013 DVB-T demodulator driver"); |
| MODULE_LICENSE("GPL"); |
| MODULE_FIRMWARE(AF9013_FIRMWARE); |