| /* |
| * File: msi.c |
| * Purpose: PCI Message Signaled Interrupt (MSI) |
| * |
| * Copyright (C) 2003-2004 Intel |
| * Copyright (C) Tom Long Nguyen (tom.l.nguyen@intel.com) |
| */ |
| |
| #include <linux/err.h> |
| #include <linux/mm.h> |
| #include <linux/irq.h> |
| #include <linux/interrupt.h> |
| #include <linux/init.h> |
| #include <linux/export.h> |
| #include <linux/ioport.h> |
| #include <linux/pci.h> |
| #include <linux/proc_fs.h> |
| #include <linux/msi.h> |
| #include <linux/smp.h> |
| #include <linux/errno.h> |
| #include <linux/io.h> |
| #include <linux/slab.h> |
| |
| #include "pci.h" |
| #include "msi.h" |
| |
| static int pci_msi_enable = 1; |
| |
| /* Arch hooks */ |
| |
| #ifndef arch_msi_check_device |
| int arch_msi_check_device(struct pci_dev *dev, int nvec, int type) |
| { |
| return 0; |
| } |
| #endif |
| |
| #ifndef arch_setup_msi_irqs |
| # define arch_setup_msi_irqs default_setup_msi_irqs |
| # define HAVE_DEFAULT_MSI_SETUP_IRQS |
| #endif |
| |
| #ifdef HAVE_DEFAULT_MSI_SETUP_IRQS |
| int default_setup_msi_irqs(struct pci_dev *dev, int nvec, int type) |
| { |
| struct msi_desc *entry; |
| int ret; |
| |
| /* |
| * If an architecture wants to support multiple MSI, it needs to |
| * override arch_setup_msi_irqs() |
| */ |
| if (type == PCI_CAP_ID_MSI && nvec > 1) |
| return 1; |
| |
| list_for_each_entry(entry, &dev->msi_list, list) { |
| ret = arch_setup_msi_irq(dev, entry); |
| if (ret < 0) |
| return ret; |
| if (ret > 0) |
| return -ENOSPC; |
| } |
| |
| return 0; |
| } |
| #endif |
| |
| #ifndef arch_teardown_msi_irqs |
| # define arch_teardown_msi_irqs default_teardown_msi_irqs |
| # define HAVE_DEFAULT_MSI_TEARDOWN_IRQS |
| #endif |
| |
| #ifdef HAVE_DEFAULT_MSI_TEARDOWN_IRQS |
| void default_teardown_msi_irqs(struct pci_dev *dev) |
| { |
| struct msi_desc *entry; |
| |
| list_for_each_entry(entry, &dev->msi_list, list) { |
| int i, nvec; |
| if (entry->irq == 0) |
| continue; |
| nvec = 1 << entry->msi_attrib.multiple; |
| for (i = 0; i < nvec; i++) |
| arch_teardown_msi_irq(entry->irq + i); |
| } |
| } |
| #endif |
| |
| static void msi_set_enable(struct pci_dev *dev, int pos, int enable) |
| { |
| u16 control; |
| |
| BUG_ON(!pos); |
| |
| pci_read_config_word(dev, pos + PCI_MSI_FLAGS, &control); |
| control &= ~PCI_MSI_FLAGS_ENABLE; |
| if (enable) |
| control |= PCI_MSI_FLAGS_ENABLE; |
| pci_write_config_word(dev, pos + PCI_MSI_FLAGS, control); |
| } |
| |
| static void msix_set_enable(struct pci_dev *dev, int enable) |
| { |
| int pos; |
| u16 control; |
| |
| pos = pci_find_capability(dev, PCI_CAP_ID_MSIX); |
| if (pos) { |
| pci_read_config_word(dev, pos + PCI_MSIX_FLAGS, &control); |
| control &= ~PCI_MSIX_FLAGS_ENABLE; |
| if (enable) |
| control |= PCI_MSIX_FLAGS_ENABLE; |
| pci_write_config_word(dev, pos + PCI_MSIX_FLAGS, control); |
| } |
| } |
| |
| static inline __attribute_const__ u32 msi_mask(unsigned x) |
| { |
| /* Don't shift by >= width of type */ |
| if (x >= 5) |
| return 0xffffffff; |
| return (1 << (1 << x)) - 1; |
| } |
| |
| static inline __attribute_const__ u32 msi_capable_mask(u16 control) |
| { |
| return msi_mask((control >> 1) & 7); |
| } |
| |
| static inline __attribute_const__ u32 msi_enabled_mask(u16 control) |
| { |
| return msi_mask((control >> 4) & 7); |
| } |
| |
| /* |
| * PCI 2.3 does not specify mask bits for each MSI interrupt. Attempting to |
| * mask all MSI interrupts by clearing the MSI enable bit does not work |
| * reliably as devices without an INTx disable bit will then generate a |
| * level IRQ which will never be cleared. |
| */ |
| static u32 __msi_mask_irq(struct msi_desc *desc, u32 mask, u32 flag) |
| { |
| u32 mask_bits = desc->masked; |
| |
| if (!desc->msi_attrib.maskbit) |
| return 0; |
| |
| mask_bits &= ~mask; |
| mask_bits |= flag; |
| pci_write_config_dword(desc->dev, desc->mask_pos, mask_bits); |
| |
| return mask_bits; |
| } |
| |
| static void msi_mask_irq(struct msi_desc *desc, u32 mask, u32 flag) |
| { |
| desc->masked = __msi_mask_irq(desc, mask, flag); |
| } |
| |
| /* |
| * This internal function does not flush PCI writes to the device. |
| * All users must ensure that they read from the device before either |
| * assuming that the device state is up to date, or returning out of this |
| * file. This saves a few milliseconds when initialising devices with lots |
| * of MSI-X interrupts. |
| */ |
| static u32 __msix_mask_irq(struct msi_desc *desc, u32 flag) |
| { |
| u32 mask_bits = desc->masked; |
| unsigned offset = desc->msi_attrib.entry_nr * PCI_MSIX_ENTRY_SIZE + |
| PCI_MSIX_ENTRY_VECTOR_CTRL; |
| mask_bits &= ~PCI_MSIX_ENTRY_CTRL_MASKBIT; |
| if (flag) |
| mask_bits |= PCI_MSIX_ENTRY_CTRL_MASKBIT; |
| writel(mask_bits, desc->mask_base + offset); |
| |
| return mask_bits; |
| } |
| |
| static void msix_mask_irq(struct msi_desc *desc, u32 flag) |
| { |
| desc->masked = __msix_mask_irq(desc, flag); |
| } |
| |
| static void msi_set_mask_bit(struct irq_data *data, u32 flag) |
| { |
| struct msi_desc *desc = irq_data_get_msi(data); |
| |
| if (desc->msi_attrib.is_msix) { |
| msix_mask_irq(desc, flag); |
| readl(desc->mask_base); /* Flush write to device */ |
| } else { |
| unsigned offset = data->irq - desc->dev->irq; |
| msi_mask_irq(desc, 1 << offset, flag << offset); |
| } |
| } |
| |
| void mask_msi_irq(struct irq_data *data) |
| { |
| msi_set_mask_bit(data, 1); |
| } |
| |
| void unmask_msi_irq(struct irq_data *data) |
| { |
| msi_set_mask_bit(data, 0); |
| } |
| |
| void __read_msi_msg(struct msi_desc *entry, struct msi_msg *msg) |
| { |
| BUG_ON(entry->dev->current_state != PCI_D0); |
| |
| if (entry->msi_attrib.is_msix) { |
| void __iomem *base = entry->mask_base + |
| entry->msi_attrib.entry_nr * PCI_MSIX_ENTRY_SIZE; |
| |
| msg->address_lo = readl(base + PCI_MSIX_ENTRY_LOWER_ADDR); |
| msg->address_hi = readl(base + PCI_MSIX_ENTRY_UPPER_ADDR); |
| msg->data = readl(base + PCI_MSIX_ENTRY_DATA); |
| } else { |
| struct pci_dev *dev = entry->dev; |
| int pos = entry->msi_attrib.pos; |
| u16 data; |
| |
| pci_read_config_dword(dev, msi_lower_address_reg(pos), |
| &msg->address_lo); |
| if (entry->msi_attrib.is_64) { |
| pci_read_config_dword(dev, msi_upper_address_reg(pos), |
| &msg->address_hi); |
| pci_read_config_word(dev, msi_data_reg(pos, 1), &data); |
| } else { |
| msg->address_hi = 0; |
| pci_read_config_word(dev, msi_data_reg(pos, 0), &data); |
| } |
| msg->data = data; |
| } |
| } |
| |
| void read_msi_msg(unsigned int irq, struct msi_msg *msg) |
| { |
| struct msi_desc *entry = irq_get_msi_desc(irq); |
| |
| __read_msi_msg(entry, msg); |
| } |
| |
| void __get_cached_msi_msg(struct msi_desc *entry, struct msi_msg *msg) |
| { |
| /* Assert that the cache is valid, assuming that |
| * valid messages are not all-zeroes. */ |
| BUG_ON(!(entry->msg.address_hi | entry->msg.address_lo | |
| entry->msg.data)); |
| |
| *msg = entry->msg; |
| } |
| |
| void get_cached_msi_msg(unsigned int irq, struct msi_msg *msg) |
| { |
| struct msi_desc *entry = irq_get_msi_desc(irq); |
| |
| __get_cached_msi_msg(entry, msg); |
| } |
| |
| void __write_msi_msg(struct msi_desc *entry, struct msi_msg *msg) |
| { |
| if (entry->dev->current_state != PCI_D0) { |
| /* Don't touch the hardware now */ |
| } else if (entry->msi_attrib.is_msix) { |
| void __iomem *base; |
| base = entry->mask_base + |
| entry->msi_attrib.entry_nr * PCI_MSIX_ENTRY_SIZE; |
| |
| writel(msg->address_lo, base + PCI_MSIX_ENTRY_LOWER_ADDR); |
| writel(msg->address_hi, base + PCI_MSIX_ENTRY_UPPER_ADDR); |
| writel(msg->data, base + PCI_MSIX_ENTRY_DATA); |
| } else { |
| struct pci_dev *dev = entry->dev; |
| int pos = entry->msi_attrib.pos; |
| u16 msgctl; |
| |
| pci_read_config_word(dev, msi_control_reg(pos), &msgctl); |
| msgctl &= ~PCI_MSI_FLAGS_QSIZE; |
| msgctl |= entry->msi_attrib.multiple << 4; |
| pci_write_config_word(dev, msi_control_reg(pos), msgctl); |
| |
| pci_write_config_dword(dev, msi_lower_address_reg(pos), |
| msg->address_lo); |
| if (entry->msi_attrib.is_64) { |
| pci_write_config_dword(dev, msi_upper_address_reg(pos), |
| msg->address_hi); |
| pci_write_config_word(dev, msi_data_reg(pos, 1), |
| msg->data); |
| } else { |
| pci_write_config_word(dev, msi_data_reg(pos, 0), |
| msg->data); |
| } |
| } |
| entry->msg = *msg; |
| } |
| |
| void write_msi_msg(unsigned int irq, struct msi_msg *msg) |
| { |
| struct msi_desc *entry = irq_get_msi_desc(irq); |
| |
| __write_msi_msg(entry, msg); |
| } |
| |
| static void free_msi_irqs(struct pci_dev *dev) |
| { |
| struct msi_desc *entry, *tmp; |
| |
| list_for_each_entry(entry, &dev->msi_list, list) { |
| int i, nvec; |
| if (!entry->irq) |
| continue; |
| nvec = 1 << entry->msi_attrib.multiple; |
| for (i = 0; i < nvec; i++) |
| BUG_ON(irq_has_action(entry->irq + i)); |
| } |
| |
| arch_teardown_msi_irqs(dev); |
| |
| list_for_each_entry_safe(entry, tmp, &dev->msi_list, list) { |
| if (entry->msi_attrib.is_msix) { |
| if (list_is_last(&entry->list, &dev->msi_list)) |
| iounmap(entry->mask_base); |
| } |
| kobject_del(&entry->kobj); |
| kobject_put(&entry->kobj); |
| list_del(&entry->list); |
| kfree(entry); |
| } |
| } |
| |
| static struct msi_desc *alloc_msi_entry(struct pci_dev *dev) |
| { |
| struct msi_desc *desc = kzalloc(sizeof(*desc), GFP_KERNEL); |
| if (!desc) |
| return NULL; |
| |
| INIT_LIST_HEAD(&desc->list); |
| desc->dev = dev; |
| |
| return desc; |
| } |
| |
| static void pci_intx_for_msi(struct pci_dev *dev, int enable) |
| { |
| if (!(dev->dev_flags & PCI_DEV_FLAGS_MSI_INTX_DISABLE_BUG)) |
| pci_intx(dev, enable); |
| } |
| |
| static void __pci_restore_msi_state(struct pci_dev *dev) |
| { |
| int pos; |
| u16 control; |
| struct msi_desc *entry; |
| |
| if (!dev->msi_enabled) |
| return; |
| |
| entry = irq_get_msi_desc(dev->irq); |
| pos = entry->msi_attrib.pos; |
| |
| pci_intx_for_msi(dev, 0); |
| msi_set_enable(dev, pos, 0); |
| write_msi_msg(dev->irq, &entry->msg); |
| |
| pci_read_config_word(dev, pos + PCI_MSI_FLAGS, &control); |
| msi_mask_irq(entry, msi_capable_mask(control), entry->masked); |
| control &= ~PCI_MSI_FLAGS_QSIZE; |
| control |= (entry->msi_attrib.multiple << 4) | PCI_MSI_FLAGS_ENABLE; |
| pci_write_config_word(dev, pos + PCI_MSI_FLAGS, control); |
| } |
| |
| static void __pci_restore_msix_state(struct pci_dev *dev) |
| { |
| int pos; |
| struct msi_desc *entry; |
| u16 control; |
| |
| if (!dev->msix_enabled) |
| return; |
| BUG_ON(list_empty(&dev->msi_list)); |
| entry = list_first_entry(&dev->msi_list, struct msi_desc, list); |
| pos = entry->msi_attrib.pos; |
| pci_read_config_word(dev, pos + PCI_MSIX_FLAGS, &control); |
| |
| /* route the table */ |
| pci_intx_for_msi(dev, 0); |
| control |= PCI_MSIX_FLAGS_ENABLE | PCI_MSIX_FLAGS_MASKALL; |
| pci_write_config_word(dev, pos + PCI_MSIX_FLAGS, control); |
| |
| list_for_each_entry(entry, &dev->msi_list, list) { |
| write_msi_msg(entry->irq, &entry->msg); |
| msix_mask_irq(entry, entry->masked); |
| } |
| |
| control &= ~PCI_MSIX_FLAGS_MASKALL; |
| pci_write_config_word(dev, pos + PCI_MSIX_FLAGS, control); |
| } |
| |
| void pci_restore_msi_state(struct pci_dev *dev) |
| { |
| __pci_restore_msi_state(dev); |
| __pci_restore_msix_state(dev); |
| } |
| EXPORT_SYMBOL_GPL(pci_restore_msi_state); |
| |
| |
| #define to_msi_attr(obj) container_of(obj, struct msi_attribute, attr) |
| #define to_msi_desc(obj) container_of(obj, struct msi_desc, kobj) |
| |
| struct msi_attribute { |
| struct attribute attr; |
| ssize_t (*show)(struct msi_desc *entry, struct msi_attribute *attr, |
| char *buf); |
| ssize_t (*store)(struct msi_desc *entry, struct msi_attribute *attr, |
| const char *buf, size_t count); |
| }; |
| |
| static ssize_t show_msi_mode(struct msi_desc *entry, struct msi_attribute *atr, |
| char *buf) |
| { |
| return sprintf(buf, "%s\n", entry->msi_attrib.is_msix ? "msix" : "msi"); |
| } |
| |
| static ssize_t msi_irq_attr_show(struct kobject *kobj, |
| struct attribute *attr, char *buf) |
| { |
| struct msi_attribute *attribute = to_msi_attr(attr); |
| struct msi_desc *entry = to_msi_desc(kobj); |
| |
| if (!attribute->show) |
| return -EIO; |
| |
| return attribute->show(entry, attribute, buf); |
| } |
| |
| static const struct sysfs_ops msi_irq_sysfs_ops = { |
| .show = msi_irq_attr_show, |
| }; |
| |
| static struct msi_attribute mode_attribute = |
| __ATTR(mode, S_IRUGO, show_msi_mode, NULL); |
| |
| |
| struct attribute *msi_irq_default_attrs[] = { |
| &mode_attribute.attr, |
| NULL |
| }; |
| |
| void msi_kobj_release(struct kobject *kobj) |
| { |
| struct msi_desc *entry = to_msi_desc(kobj); |
| |
| pci_dev_put(entry->dev); |
| } |
| |
| static struct kobj_type msi_irq_ktype = { |
| .release = msi_kobj_release, |
| .sysfs_ops = &msi_irq_sysfs_ops, |
| .default_attrs = msi_irq_default_attrs, |
| }; |
| |
| static int populate_msi_sysfs(struct pci_dev *pdev) |
| { |
| struct msi_desc *entry; |
| struct kobject *kobj; |
| int ret; |
| int count = 0; |
| |
| pdev->msi_kset = kset_create_and_add("msi_irqs", NULL, &pdev->dev.kobj); |
| if (!pdev->msi_kset) |
| return -ENOMEM; |
| |
| list_for_each_entry(entry, &pdev->msi_list, list) { |
| kobj = &entry->kobj; |
| kobj->kset = pdev->msi_kset; |
| pci_dev_get(pdev); |
| ret = kobject_init_and_add(kobj, &msi_irq_ktype, NULL, |
| "%u", entry->irq); |
| if (ret) |
| goto out_unroll; |
| |
| count++; |
| } |
| |
| return 0; |
| |
| out_unroll: |
| list_for_each_entry(entry, &pdev->msi_list, list) { |
| if (!count) |
| break; |
| kobject_del(&entry->kobj); |
| kobject_put(&entry->kobj); |
| count--; |
| } |
| return ret; |
| } |
| |
| /** |
| * msi_capability_init - configure device's MSI capability structure |
| * @dev: pointer to the pci_dev data structure of MSI device function |
| * @nvec: number of interrupts to allocate |
| * |
| * Setup the MSI capability structure of the device with the requested |
| * number of interrupts. A return value of zero indicates the successful |
| * setup of an entry with the new MSI irq. A negative return value indicates |
| * an error, and a positive return value indicates the number of interrupts |
| * which could have been allocated. |
| */ |
| static int msi_capability_init(struct pci_dev *dev, int nvec) |
| { |
| struct msi_desc *entry; |
| int pos, ret; |
| u16 control; |
| unsigned mask; |
| |
| pos = pci_find_capability(dev, PCI_CAP_ID_MSI); |
| msi_set_enable(dev, pos, 0); /* Disable MSI during set up */ |
| |
| pci_read_config_word(dev, msi_control_reg(pos), &control); |
| /* MSI Entry Initialization */ |
| entry = alloc_msi_entry(dev); |
| if (!entry) |
| return -ENOMEM; |
| |
| entry->msi_attrib.is_msix = 0; |
| entry->msi_attrib.is_64 = is_64bit_address(control); |
| entry->msi_attrib.entry_nr = 0; |
| entry->msi_attrib.maskbit = is_mask_bit_support(control); |
| entry->msi_attrib.default_irq = dev->irq; /* Save IOAPIC IRQ */ |
| entry->msi_attrib.pos = pos; |
| |
| entry->mask_pos = msi_mask_reg(pos, entry->msi_attrib.is_64); |
| /* All MSIs are unmasked by default, Mask them all */ |
| if (entry->msi_attrib.maskbit) |
| pci_read_config_dword(dev, entry->mask_pos, &entry->masked); |
| mask = msi_capable_mask(control); |
| msi_mask_irq(entry, mask, mask); |
| |
| list_add_tail(&entry->list, &dev->msi_list); |
| |
| /* Configure MSI capability structure */ |
| ret = arch_setup_msi_irqs(dev, nvec, PCI_CAP_ID_MSI); |
| if (ret) { |
| msi_mask_irq(entry, mask, ~mask); |
| free_msi_irqs(dev); |
| return ret; |
| } |
| |
| ret = populate_msi_sysfs(dev); |
| if (ret) { |
| msi_mask_irq(entry, mask, ~mask); |
| free_msi_irqs(dev); |
| return ret; |
| } |
| |
| /* Set MSI enabled bits */ |
| pci_intx_for_msi(dev, 0); |
| msi_set_enable(dev, pos, 1); |
| dev->msi_enabled = 1; |
| |
| dev->irq = entry->irq; |
| return 0; |
| } |
| |
| static void __iomem *msix_map_region(struct pci_dev *dev, unsigned pos, |
| unsigned nr_entries) |
| { |
| resource_size_t phys_addr; |
| u32 table_offset; |
| u8 bir; |
| |
| pci_read_config_dword(dev, msix_table_offset_reg(pos), &table_offset); |
| bir = (u8)(table_offset & PCI_MSIX_FLAGS_BIRMASK); |
| table_offset &= ~PCI_MSIX_FLAGS_BIRMASK; |
| phys_addr = pci_resource_start(dev, bir) + table_offset; |
| |
| return ioremap_nocache(phys_addr, nr_entries * PCI_MSIX_ENTRY_SIZE); |
| } |
| |
| static int msix_setup_entries(struct pci_dev *dev, unsigned pos, |
| void __iomem *base, struct msix_entry *entries, |
| int nvec) |
| { |
| struct msi_desc *entry; |
| int i; |
| |
| for (i = 0; i < nvec; i++) { |
| entry = alloc_msi_entry(dev); |
| if (!entry) { |
| if (!i) |
| iounmap(base); |
| else |
| free_msi_irqs(dev); |
| /* No enough memory. Don't try again */ |
| return -ENOMEM; |
| } |
| |
| entry->msi_attrib.is_msix = 1; |
| entry->msi_attrib.is_64 = 1; |
| entry->msi_attrib.entry_nr = entries[i].entry; |
| entry->msi_attrib.default_irq = dev->irq; |
| entry->msi_attrib.pos = pos; |
| entry->mask_base = base; |
| |
| list_add_tail(&entry->list, &dev->msi_list); |
| } |
| |
| return 0; |
| } |
| |
| static void msix_program_entries(struct pci_dev *dev, |
| struct msix_entry *entries) |
| { |
| struct msi_desc *entry; |
| int i = 0; |
| |
| list_for_each_entry(entry, &dev->msi_list, list) { |
| int offset = entries[i].entry * PCI_MSIX_ENTRY_SIZE + |
| PCI_MSIX_ENTRY_VECTOR_CTRL; |
| |
| entries[i].vector = entry->irq; |
| irq_set_msi_desc(entry->irq, entry); |
| entry->masked = readl(entry->mask_base + offset); |
| msix_mask_irq(entry, 1); |
| i++; |
| } |
| } |
| |
| /** |
| * msix_capability_init - configure device's MSI-X capability |
| * @dev: pointer to the pci_dev data structure of MSI-X device function |
| * @entries: pointer to an array of struct msix_entry entries |
| * @nvec: number of @entries |
| * |
| * Setup the MSI-X capability structure of device function with a |
| * single MSI-X irq. A return of zero indicates the successful setup of |
| * requested MSI-X entries with allocated irqs or non-zero for otherwise. |
| **/ |
| static int msix_capability_init(struct pci_dev *dev, |
| struct msix_entry *entries, int nvec) |
| { |
| int pos, ret; |
| u16 control; |
| void __iomem *base; |
| |
| pos = pci_find_capability(dev, PCI_CAP_ID_MSIX); |
| pci_read_config_word(dev, pos + PCI_MSIX_FLAGS, &control); |
| |
| /* Ensure MSI-X is disabled while it is set up */ |
| control &= ~PCI_MSIX_FLAGS_ENABLE; |
| pci_write_config_word(dev, pos + PCI_MSIX_FLAGS, control); |
| |
| /* Request & Map MSI-X table region */ |
| base = msix_map_region(dev, pos, multi_msix_capable(control)); |
| if (!base) |
| return -ENOMEM; |
| |
| ret = msix_setup_entries(dev, pos, base, entries, nvec); |
| if (ret) |
| return ret; |
| |
| ret = arch_setup_msi_irqs(dev, nvec, PCI_CAP_ID_MSIX); |
| if (ret) |
| goto error; |
| |
| /* |
| * Some devices require MSI-X to be enabled before we can touch the |
| * MSI-X registers. We need to mask all the vectors to prevent |
| * interrupts coming in before they're fully set up. |
| */ |
| control |= PCI_MSIX_FLAGS_MASKALL | PCI_MSIX_FLAGS_ENABLE; |
| pci_write_config_word(dev, pos + PCI_MSIX_FLAGS, control); |
| |
| msix_program_entries(dev, entries); |
| |
| ret = populate_msi_sysfs(dev); |
| if (ret) { |
| ret = 0; |
| goto error; |
| } |
| |
| /* Set MSI-X enabled bits and unmask the function */ |
| pci_intx_for_msi(dev, 0); |
| dev->msix_enabled = 1; |
| |
| control &= ~PCI_MSIX_FLAGS_MASKALL; |
| pci_write_config_word(dev, pos + PCI_MSIX_FLAGS, control); |
| |
| return 0; |
| |
| error: |
| if (ret < 0) { |
| /* |
| * If we had some success, report the number of irqs |
| * we succeeded in setting up. |
| */ |
| struct msi_desc *entry; |
| int avail = 0; |
| |
| list_for_each_entry(entry, &dev->msi_list, list) { |
| if (entry->irq != 0) |
| avail++; |
| } |
| if (avail != 0) |
| ret = avail; |
| } |
| |
| free_msi_irqs(dev); |
| |
| return ret; |
| } |
| |
| /** |
| * pci_msi_check_device - check whether MSI may be enabled on a device |
| * @dev: pointer to the pci_dev data structure of MSI device function |
| * @nvec: how many MSIs have been requested ? |
| * @type: are we checking for MSI or MSI-X ? |
| * |
| * Look at global flags, the device itself, and its parent busses |
| * to determine if MSI/-X are supported for the device. If MSI/-X is |
| * supported return 0, else return an error code. |
| **/ |
| static int pci_msi_check_device(struct pci_dev *dev, int nvec, int type) |
| { |
| struct pci_bus *bus; |
| int ret; |
| |
| /* MSI must be globally enabled and supported by the device */ |
| if (!pci_msi_enable || !dev || dev->no_msi) |
| return -EINVAL; |
| |
| /* |
| * You can't ask to have 0 or less MSIs configured. |
| * a) it's stupid .. |
| * b) the list manipulation code assumes nvec >= 1. |
| */ |
| if (nvec < 1) |
| return -ERANGE; |
| |
| /* |
| * Any bridge which does NOT route MSI transactions from its |
| * secondary bus to its primary bus must set NO_MSI flag on |
| * the secondary pci_bus. |
| * We expect only arch-specific PCI host bus controller driver |
| * or quirks for specific PCI bridges to be setting NO_MSI. |
| */ |
| for (bus = dev->bus; bus; bus = bus->parent) |
| if (bus->bus_flags & PCI_BUS_FLAGS_NO_MSI) |
| return -EINVAL; |
| |
| ret = arch_msi_check_device(dev, nvec, type); |
| if (ret) |
| return ret; |
| |
| if (!pci_find_capability(dev, type)) |
| return -EINVAL; |
| |
| return 0; |
| } |
| |
| /** |
| * pci_enable_msi_block - configure device's MSI capability structure |
| * @dev: device to configure |
| * @nvec: number of interrupts to configure |
| * |
| * Allocate IRQs for a device with the MSI capability. |
| * This function returns a negative errno if an error occurs. If it |
| * is unable to allocate the number of interrupts requested, it returns |
| * the number of interrupts it might be able to allocate. If it successfully |
| * allocates at least the number of interrupts requested, it returns 0 and |
| * updates the @dev's irq member to the lowest new interrupt number; the |
| * other interrupt numbers allocated to this device are consecutive. |
| */ |
| int pci_enable_msi_block(struct pci_dev *dev, unsigned int nvec) |
| { |
| int status, pos, maxvec; |
| u16 msgctl; |
| |
| pos = pci_find_capability(dev, PCI_CAP_ID_MSI); |
| if (!pos) |
| return -EINVAL; |
| pci_read_config_word(dev, pos + PCI_MSI_FLAGS, &msgctl); |
| maxvec = 1 << ((msgctl & PCI_MSI_FLAGS_QMASK) >> 1); |
| if (nvec > maxvec) |
| return maxvec; |
| |
| status = pci_msi_check_device(dev, nvec, PCI_CAP_ID_MSI); |
| if (status) |
| return status; |
| |
| WARN_ON(!!dev->msi_enabled); |
| |
| /* Check whether driver already requested MSI-X irqs */ |
| if (dev->msix_enabled) { |
| dev_info(&dev->dev, "can't enable MSI " |
| "(MSI-X already enabled)\n"); |
| return -EINVAL; |
| } |
| |
| status = msi_capability_init(dev, nvec); |
| return status; |
| } |
| EXPORT_SYMBOL(pci_enable_msi_block); |
| |
| void pci_msi_shutdown(struct pci_dev *dev) |
| { |
| struct msi_desc *desc; |
| u32 mask; |
| u16 ctrl; |
| unsigned pos; |
| |
| if (!pci_msi_enable || !dev || !dev->msi_enabled) |
| return; |
| |
| BUG_ON(list_empty(&dev->msi_list)); |
| desc = list_first_entry(&dev->msi_list, struct msi_desc, list); |
| pos = desc->msi_attrib.pos; |
| |
| msi_set_enable(dev, pos, 0); |
| pci_intx_for_msi(dev, 1); |
| dev->msi_enabled = 0; |
| |
| /* Return the device with MSI unmasked as initial states */ |
| pci_read_config_word(dev, pos + PCI_MSI_FLAGS, &ctrl); |
| mask = msi_capable_mask(ctrl); |
| /* Keep cached state to be restored */ |
| __msi_mask_irq(desc, mask, ~mask); |
| |
| /* Restore dev->irq to its default pin-assertion irq */ |
| dev->irq = desc->msi_attrib.default_irq; |
| } |
| |
| void pci_disable_msi(struct pci_dev *dev) |
| { |
| if (!pci_msi_enable || !dev || !dev->msi_enabled) |
| return; |
| |
| pci_msi_shutdown(dev); |
| free_msi_irqs(dev); |
| kset_unregister(dev->msi_kset); |
| dev->msi_kset = NULL; |
| } |
| EXPORT_SYMBOL(pci_disable_msi); |
| |
| /** |
| * pci_msix_table_size - return the number of device's MSI-X table entries |
| * @dev: pointer to the pci_dev data structure of MSI-X device function |
| */ |
| int pci_msix_table_size(struct pci_dev *dev) |
| { |
| int pos; |
| u16 control; |
| |
| pos = pci_find_capability(dev, PCI_CAP_ID_MSIX); |
| if (!pos) |
| return 0; |
| |
| pci_read_config_word(dev, msi_control_reg(pos), &control); |
| return multi_msix_capable(control); |
| } |
| |
| /** |
| * pci_enable_msix - configure device's MSI-X capability structure |
| * @dev: pointer to the pci_dev data structure of MSI-X device function |
| * @entries: pointer to an array of MSI-X entries |
| * @nvec: number of MSI-X irqs requested for allocation by device driver |
| * |
| * Setup the MSI-X capability structure of device function with the number |
| * of requested irqs upon its software driver call to request for |
| * MSI-X mode enabled on its hardware device function. A return of zero |
| * indicates the successful configuration of MSI-X capability structure |
| * with new allocated MSI-X irqs. A return of < 0 indicates a failure. |
| * Or a return of > 0 indicates that driver request is exceeding the number |
| * of irqs or MSI-X vectors available. Driver should use the returned value to |
| * re-send its request. |
| **/ |
| int pci_enable_msix(struct pci_dev *dev, struct msix_entry *entries, int nvec) |
| { |
| int status, nr_entries; |
| int i, j; |
| |
| if (!entries) |
| return -EINVAL; |
| |
| status = pci_msi_check_device(dev, nvec, PCI_CAP_ID_MSIX); |
| if (status) |
| return status; |
| |
| nr_entries = pci_msix_table_size(dev); |
| if (nvec > nr_entries) |
| return nr_entries; |
| |
| /* Check for any invalid entries */ |
| for (i = 0; i < nvec; i++) { |
| if (entries[i].entry >= nr_entries) |
| return -EINVAL; /* invalid entry */ |
| for (j = i + 1; j < nvec; j++) { |
| if (entries[i].entry == entries[j].entry) |
| return -EINVAL; /* duplicate entry */ |
| } |
| } |
| WARN_ON(!!dev->msix_enabled); |
| |
| /* Check whether driver already requested for MSI irq */ |
| if (dev->msi_enabled) { |
| dev_info(&dev->dev, "can't enable MSI-X " |
| "(MSI IRQ already assigned)\n"); |
| return -EINVAL; |
| } |
| status = msix_capability_init(dev, entries, nvec); |
| return status; |
| } |
| EXPORT_SYMBOL(pci_enable_msix); |
| |
| void pci_msix_shutdown(struct pci_dev *dev) |
| { |
| struct msi_desc *entry; |
| |
| if (!pci_msi_enable || !dev || !dev->msix_enabled) |
| return; |
| |
| /* Return the device with MSI-X masked as initial states */ |
| list_for_each_entry(entry, &dev->msi_list, list) { |
| /* Keep cached states to be restored */ |
| __msix_mask_irq(entry, 1); |
| } |
| |
| msix_set_enable(dev, 0); |
| pci_intx_for_msi(dev, 1); |
| dev->msix_enabled = 0; |
| } |
| |
| void pci_disable_msix(struct pci_dev *dev) |
| { |
| if (!pci_msi_enable || !dev || !dev->msix_enabled) |
| return; |
| |
| pci_msix_shutdown(dev); |
| free_msi_irqs(dev); |
| kset_unregister(dev->msi_kset); |
| dev->msi_kset = NULL; |
| } |
| EXPORT_SYMBOL(pci_disable_msix); |
| |
| /** |
| * msi_remove_pci_irq_vectors - reclaim MSI(X) irqs to unused state |
| * @dev: pointer to the pci_dev data structure of MSI(X) device function |
| * |
| * Being called during hotplug remove, from which the device function |
| * is hot-removed. All previous assigned MSI/MSI-X irqs, if |
| * allocated for this device function, are reclaimed to unused state, |
| * which may be used later on. |
| **/ |
| void msi_remove_pci_irq_vectors(struct pci_dev *dev) |
| { |
| if (!pci_msi_enable || !dev) |
| return; |
| |
| if (dev->msi_enabled || dev->msix_enabled) |
| free_msi_irqs(dev); |
| } |
| |
| void pci_no_msi(void) |
| { |
| pci_msi_enable = 0; |
| } |
| |
| /** |
| * pci_msi_enabled - is MSI enabled? |
| * |
| * Returns true if MSI has not been disabled by the command-line option |
| * pci=nomsi. |
| **/ |
| int pci_msi_enabled(void) |
| { |
| return pci_msi_enable; |
| } |
| EXPORT_SYMBOL(pci_msi_enabled); |
| |
| void pci_msi_init_pci_dev(struct pci_dev *dev) |
| { |
| INIT_LIST_HEAD(&dev->msi_list); |
| } |