| /* |
| * Driver for the Conexant CX23885 PCIe bridge |
| * |
| * Copyright (c) 2006 Steven Toth <stoth@linuxtv.org> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. |
| */ |
| |
| #include <linux/init.h> |
| #include <linux/module.h> |
| #include <linux/pci.h> |
| #include <linux/delay.h> |
| #include <media/cx25840.h> |
| #include <linux/firmware.h> |
| #include <misc/altera.h> |
| |
| #include "cx23885.h" |
| #include "tuner-xc2028.h" |
| #include "netup-eeprom.h" |
| #include "netup-init.h" |
| #include "altera-ci.h" |
| #include "xc4000.h" |
| #include "xc5000.h" |
| #include "cx23888-ir.h" |
| |
| static unsigned int netup_card_rev = 1; |
| module_param(netup_card_rev, int, 0644); |
| MODULE_PARM_DESC(netup_card_rev, |
| "NetUP Dual DVB-T/C CI card revision"); |
| static unsigned int enable_885_ir; |
| module_param(enable_885_ir, int, 0644); |
| MODULE_PARM_DESC(enable_885_ir, |
| "Enable integrated IR controller for supported\n" |
| "\t\t CX2388[57] boards that are wired for it:\n" |
| "\t\t\tHVR-1250 (reported safe)\n" |
| "\t\t\tTeVii S470 (reported unsafe)\n" |
| "\t\t This can cause an interrupt storm with some cards.\n" |
| "\t\t Default: 0 [Disabled]"); |
| |
| /* ------------------------------------------------------------------ */ |
| /* board config info */ |
| |
| struct cx23885_board cx23885_boards[] = { |
| [CX23885_BOARD_UNKNOWN] = { |
| .name = "UNKNOWN/GENERIC", |
| /* Ensure safe default for unknown boards */ |
| .clk_freq = 0, |
| .input = {{ |
| .type = CX23885_VMUX_COMPOSITE1, |
| .vmux = 0, |
| }, { |
| .type = CX23885_VMUX_COMPOSITE2, |
| .vmux = 1, |
| }, { |
| .type = CX23885_VMUX_COMPOSITE3, |
| .vmux = 2, |
| }, { |
| .type = CX23885_VMUX_COMPOSITE4, |
| .vmux = 3, |
| } }, |
| }, |
| [CX23885_BOARD_HAUPPAUGE_HVR1800lp] = { |
| .name = "Hauppauge WinTV-HVR1800lp", |
| .portc = CX23885_MPEG_DVB, |
| .input = {{ |
| .type = CX23885_VMUX_TELEVISION, |
| .vmux = 0, |
| .gpio0 = 0xff00, |
| }, { |
| .type = CX23885_VMUX_DEBUG, |
| .vmux = 0, |
| .gpio0 = 0xff01, |
| }, { |
| .type = CX23885_VMUX_COMPOSITE1, |
| .vmux = 1, |
| .gpio0 = 0xff02, |
| }, { |
| .type = CX23885_VMUX_SVIDEO, |
| .vmux = 2, |
| .gpio0 = 0xff02, |
| } }, |
| }, |
| [CX23885_BOARD_HAUPPAUGE_HVR1800] = { |
| .name = "Hauppauge WinTV-HVR1800", |
| .porta = CX23885_ANALOG_VIDEO, |
| .portb = CX23885_MPEG_ENCODER, |
| .portc = CX23885_MPEG_DVB, |
| .tuner_type = TUNER_PHILIPS_TDA8290, |
| .tuner_addr = 0x42, /* 0x84 >> 1 */ |
| .tuner_bus = 1, |
| .input = {{ |
| .type = CX23885_VMUX_TELEVISION, |
| .vmux = CX25840_VIN7_CH3 | |
| CX25840_VIN5_CH2 | |
| CX25840_VIN2_CH1, |
| .amux = CX25840_AUDIO8, |
| .gpio0 = 0, |
| }, { |
| .type = CX23885_VMUX_COMPOSITE1, |
| .vmux = CX25840_VIN7_CH3 | |
| CX25840_VIN4_CH2 | |
| CX25840_VIN6_CH1, |
| .amux = CX25840_AUDIO7, |
| .gpio0 = 0, |
| }, { |
| .type = CX23885_VMUX_SVIDEO, |
| .vmux = CX25840_VIN7_CH3 | |
| CX25840_VIN4_CH2 | |
| CX25840_VIN8_CH1 | |
| CX25840_SVIDEO_ON, |
| .amux = CX25840_AUDIO7, |
| .gpio0 = 0, |
| } }, |
| }, |
| [CX23885_BOARD_HAUPPAUGE_HVR1250] = { |
| .name = "Hauppauge WinTV-HVR1250", |
| .porta = CX23885_ANALOG_VIDEO, |
| .portc = CX23885_MPEG_DVB, |
| #ifdef MT2131_NO_ANALOG_SUPPORT_YET |
| .tuner_type = TUNER_PHILIPS_TDA8290, |
| .tuner_addr = 0x42, /* 0x84 >> 1 */ |
| .tuner_bus = 1, |
| #endif |
| .force_bff = 1, |
| .input = {{ |
| #ifdef MT2131_NO_ANALOG_SUPPORT_YET |
| .type = CX23885_VMUX_TELEVISION, |
| .vmux = CX25840_VIN7_CH3 | |
| CX25840_VIN5_CH2 | |
| CX25840_VIN2_CH1, |
| .amux = CX25840_AUDIO8, |
| .gpio0 = 0xff00, |
| }, { |
| #endif |
| .type = CX23885_VMUX_COMPOSITE1, |
| .vmux = CX25840_VIN7_CH3 | |
| CX25840_VIN4_CH2 | |
| CX25840_VIN6_CH1, |
| .amux = CX25840_AUDIO7, |
| .gpio0 = 0xff02, |
| }, { |
| .type = CX23885_VMUX_SVIDEO, |
| .vmux = CX25840_VIN7_CH3 | |
| CX25840_VIN4_CH2 | |
| CX25840_VIN8_CH1 | |
| CX25840_SVIDEO_ON, |
| .amux = CX25840_AUDIO7, |
| .gpio0 = 0xff02, |
| } }, |
| }, |
| [CX23885_BOARD_DVICO_FUSIONHDTV_5_EXP] = { |
| .name = "DViCO FusionHDTV5 Express", |
| .portb = CX23885_MPEG_DVB, |
| }, |
| [CX23885_BOARD_HAUPPAUGE_HVR1500Q] = { |
| .name = "Hauppauge WinTV-HVR1500Q", |
| .portc = CX23885_MPEG_DVB, |
| }, |
| [CX23885_BOARD_HAUPPAUGE_HVR1500] = { |
| .name = "Hauppauge WinTV-HVR1500", |
| .porta = CX23885_ANALOG_VIDEO, |
| .portc = CX23885_MPEG_DVB, |
| .tuner_type = TUNER_XC2028, |
| .tuner_addr = 0x61, /* 0xc2 >> 1 */ |
| .input = {{ |
| .type = CX23885_VMUX_TELEVISION, |
| .vmux = CX25840_VIN7_CH3 | |
| CX25840_VIN5_CH2 | |
| CX25840_VIN2_CH1, |
| .gpio0 = 0, |
| }, { |
| .type = CX23885_VMUX_COMPOSITE1, |
| .vmux = CX25840_VIN7_CH3 | |
| CX25840_VIN4_CH2 | |
| CX25840_VIN6_CH1, |
| .gpio0 = 0, |
| }, { |
| .type = CX23885_VMUX_SVIDEO, |
| .vmux = CX25840_VIN7_CH3 | |
| CX25840_VIN4_CH2 | |
| CX25840_VIN8_CH1 | |
| CX25840_SVIDEO_ON, |
| .gpio0 = 0, |
| } }, |
| }, |
| [CX23885_BOARD_HAUPPAUGE_HVR1200] = { |
| .name = "Hauppauge WinTV-HVR1200", |
| .portc = CX23885_MPEG_DVB, |
| }, |
| [CX23885_BOARD_HAUPPAUGE_HVR1700] = { |
| .name = "Hauppauge WinTV-HVR1700", |
| .portc = CX23885_MPEG_DVB, |
| }, |
| [CX23885_BOARD_HAUPPAUGE_HVR1400] = { |
| .name = "Hauppauge WinTV-HVR1400", |
| .portc = CX23885_MPEG_DVB, |
| }, |
| [CX23885_BOARD_DVICO_FUSIONHDTV_7_DUAL_EXP] = { |
| .name = "DViCO FusionHDTV7 Dual Express", |
| .portb = CX23885_MPEG_DVB, |
| .portc = CX23885_MPEG_DVB, |
| }, |
| [CX23885_BOARD_DVICO_FUSIONHDTV_DVB_T_DUAL_EXP] = { |
| .name = "DViCO FusionHDTV DVB-T Dual Express", |
| .portb = CX23885_MPEG_DVB, |
| .portc = CX23885_MPEG_DVB, |
| }, |
| [CX23885_BOARD_LEADTEK_WINFAST_PXDVR3200_H] = { |
| .name = "Leadtek Winfast PxDVR3200 H", |
| .portc = CX23885_MPEG_DVB, |
| }, |
| [CX23885_BOARD_LEADTEK_WINFAST_PXDVR3200_H_XC4000] = { |
| .name = "Leadtek Winfast PxDVR3200 H XC4000", |
| .porta = CX23885_ANALOG_VIDEO, |
| .portc = CX23885_MPEG_DVB, |
| .tuner_type = TUNER_XC4000, |
| .tuner_addr = 0x61, |
| .radio_type = UNSET, |
| .radio_addr = ADDR_UNSET, |
| .input = {{ |
| .type = CX23885_VMUX_TELEVISION, |
| .vmux = CX25840_VIN2_CH1 | |
| CX25840_VIN5_CH2 | |
| CX25840_NONE0_CH3, |
| }, { |
| .type = CX23885_VMUX_COMPOSITE1, |
| .vmux = CX25840_COMPOSITE1, |
| }, { |
| .type = CX23885_VMUX_SVIDEO, |
| .vmux = CX25840_SVIDEO_LUMA3 | |
| CX25840_SVIDEO_CHROMA4, |
| }, { |
| .type = CX23885_VMUX_COMPONENT, |
| .vmux = CX25840_VIN7_CH1 | |
| CX25840_VIN6_CH2 | |
| CX25840_VIN8_CH3 | |
| CX25840_COMPONENT_ON, |
| } }, |
| }, |
| [CX23885_BOARD_COMPRO_VIDEOMATE_E650F] = { |
| .name = "Compro VideoMate E650F", |
| .portc = CX23885_MPEG_DVB, |
| }, |
| [CX23885_BOARD_TBS_6920] = { |
| .name = "TurboSight TBS 6920", |
| .portb = CX23885_MPEG_DVB, |
| }, |
| [CX23885_BOARD_TEVII_S470] = { |
| .name = "TeVii S470", |
| .portb = CX23885_MPEG_DVB, |
| }, |
| [CX23885_BOARD_DVBWORLD_2005] = { |
| .name = "DVBWorld DVB-S2 2005", |
| .portb = CX23885_MPEG_DVB, |
| }, |
| [CX23885_BOARD_NETUP_DUAL_DVBS2_CI] = { |
| .ci_type = 1, |
| .name = "NetUP Dual DVB-S2 CI", |
| .portb = CX23885_MPEG_DVB, |
| .portc = CX23885_MPEG_DVB, |
| }, |
| [CX23885_BOARD_HAUPPAUGE_HVR1270] = { |
| .name = "Hauppauge WinTV-HVR1270", |
| .portc = CX23885_MPEG_DVB, |
| }, |
| [CX23885_BOARD_HAUPPAUGE_HVR1275] = { |
| .name = "Hauppauge WinTV-HVR1275", |
| .portc = CX23885_MPEG_DVB, |
| }, |
| [CX23885_BOARD_HAUPPAUGE_HVR1255] = { |
| .name = "Hauppauge WinTV-HVR1255", |
| .porta = CX23885_ANALOG_VIDEO, |
| .portc = CX23885_MPEG_DVB, |
| .tuner_type = TUNER_ABSENT, |
| .tuner_addr = 0x42, /* 0x84 >> 1 */ |
| .force_bff = 1, |
| .input = {{ |
| .type = CX23885_VMUX_TELEVISION, |
| .vmux = CX25840_VIN7_CH3 | |
| CX25840_VIN5_CH2 | |
| CX25840_VIN2_CH1 | |
| CX25840_DIF_ON, |
| .amux = CX25840_AUDIO8, |
| }, { |
| .type = CX23885_VMUX_COMPOSITE1, |
| .vmux = CX25840_VIN7_CH3 | |
| CX25840_VIN4_CH2 | |
| CX25840_VIN6_CH1, |
| .amux = CX25840_AUDIO7, |
| }, { |
| .type = CX23885_VMUX_SVIDEO, |
| .vmux = CX25840_VIN7_CH3 | |
| CX25840_VIN4_CH2 | |
| CX25840_VIN8_CH1 | |
| CX25840_SVIDEO_ON, |
| .amux = CX25840_AUDIO7, |
| } }, |
| }, |
| [CX23885_BOARD_HAUPPAUGE_HVR1255_22111] = { |
| .name = "Hauppauge WinTV-HVR1255", |
| .porta = CX23885_ANALOG_VIDEO, |
| .portc = CX23885_MPEG_DVB, |
| .tuner_type = TUNER_ABSENT, |
| .tuner_addr = 0x42, /* 0x84 >> 1 */ |
| .force_bff = 1, |
| .input = {{ |
| .type = CX23885_VMUX_TELEVISION, |
| .vmux = CX25840_VIN7_CH3 | |
| CX25840_VIN5_CH2 | |
| CX25840_VIN2_CH1 | |
| CX25840_DIF_ON, |
| .amux = CX25840_AUDIO8, |
| }, { |
| .type = CX23885_VMUX_SVIDEO, |
| .vmux = CX25840_VIN7_CH3 | |
| CX25840_VIN4_CH2 | |
| CX25840_VIN8_CH1 | |
| CX25840_SVIDEO_ON, |
| .amux = CX25840_AUDIO7, |
| } }, |
| }, |
| [CX23885_BOARD_HAUPPAUGE_HVR1210] = { |
| .name = "Hauppauge WinTV-HVR1210", |
| .portc = CX23885_MPEG_DVB, |
| }, |
| [CX23885_BOARD_MYGICA_X8506] = { |
| .name = "Mygica X8506 DMB-TH", |
| .tuner_type = TUNER_XC5000, |
| .tuner_addr = 0x61, |
| .tuner_bus = 1, |
| .porta = CX23885_ANALOG_VIDEO, |
| .portb = CX23885_MPEG_DVB, |
| .input = { |
| { |
| .type = CX23885_VMUX_TELEVISION, |
| .vmux = CX25840_COMPOSITE2, |
| }, |
| { |
| .type = CX23885_VMUX_COMPOSITE1, |
| .vmux = CX25840_COMPOSITE8, |
| }, |
| { |
| .type = CX23885_VMUX_SVIDEO, |
| .vmux = CX25840_SVIDEO_LUMA3 | |
| CX25840_SVIDEO_CHROMA4, |
| }, |
| { |
| .type = CX23885_VMUX_COMPONENT, |
| .vmux = CX25840_COMPONENT_ON | |
| CX25840_VIN1_CH1 | |
| CX25840_VIN6_CH2 | |
| CX25840_VIN7_CH3, |
| }, |
| }, |
| }, |
| [CX23885_BOARD_MAGICPRO_PROHDTVE2] = { |
| .name = "Magic-Pro ProHDTV Extreme 2", |
| .tuner_type = TUNER_XC5000, |
| .tuner_addr = 0x61, |
| .tuner_bus = 1, |
| .porta = CX23885_ANALOG_VIDEO, |
| .portb = CX23885_MPEG_DVB, |
| .input = { |
| { |
| .type = CX23885_VMUX_TELEVISION, |
| .vmux = CX25840_COMPOSITE2, |
| }, |
| { |
| .type = CX23885_VMUX_COMPOSITE1, |
| .vmux = CX25840_COMPOSITE8, |
| }, |
| { |
| .type = CX23885_VMUX_SVIDEO, |
| .vmux = CX25840_SVIDEO_LUMA3 | |
| CX25840_SVIDEO_CHROMA4, |
| }, |
| { |
| .type = CX23885_VMUX_COMPONENT, |
| .vmux = CX25840_COMPONENT_ON | |
| CX25840_VIN1_CH1 | |
| CX25840_VIN6_CH2 | |
| CX25840_VIN7_CH3, |
| }, |
| }, |
| }, |
| [CX23885_BOARD_HAUPPAUGE_HVR1850] = { |
| .name = "Hauppauge WinTV-HVR1850", |
| .porta = CX23885_ANALOG_VIDEO, |
| .portb = CX23885_MPEG_ENCODER, |
| .portc = CX23885_MPEG_DVB, |
| .tuner_type = TUNER_ABSENT, |
| .tuner_addr = 0x42, /* 0x84 >> 1 */ |
| .force_bff = 1, |
| .input = {{ |
| .type = CX23885_VMUX_TELEVISION, |
| .vmux = CX25840_VIN7_CH3 | |
| CX25840_VIN5_CH2 | |
| CX25840_VIN2_CH1 | |
| CX25840_DIF_ON, |
| .amux = CX25840_AUDIO8, |
| }, { |
| .type = CX23885_VMUX_COMPOSITE1, |
| .vmux = CX25840_VIN7_CH3 | |
| CX25840_VIN4_CH2 | |
| CX25840_VIN6_CH1, |
| .amux = CX25840_AUDIO7, |
| }, { |
| .type = CX23885_VMUX_SVIDEO, |
| .vmux = CX25840_VIN7_CH3 | |
| CX25840_VIN4_CH2 | |
| CX25840_VIN8_CH1 | |
| CX25840_SVIDEO_ON, |
| .amux = CX25840_AUDIO7, |
| } }, |
| }, |
| [CX23885_BOARD_COMPRO_VIDEOMATE_E800] = { |
| .name = "Compro VideoMate E800", |
| .portc = CX23885_MPEG_DVB, |
| }, |
| [CX23885_BOARD_HAUPPAUGE_HVR1290] = { |
| .name = "Hauppauge WinTV-HVR1290", |
| .portc = CX23885_MPEG_DVB, |
| }, |
| [CX23885_BOARD_MYGICA_X8558PRO] = { |
| .name = "Mygica X8558 PRO DMB-TH", |
| .portb = CX23885_MPEG_DVB, |
| .portc = CX23885_MPEG_DVB, |
| }, |
| [CX23885_BOARD_LEADTEK_WINFAST_PXTV1200] = { |
| .name = "LEADTEK WinFast PxTV1200", |
| .porta = CX23885_ANALOG_VIDEO, |
| .tuner_type = TUNER_XC2028, |
| .tuner_addr = 0x61, |
| .tuner_bus = 1, |
| .input = {{ |
| .type = CX23885_VMUX_TELEVISION, |
| .vmux = CX25840_VIN2_CH1 | |
| CX25840_VIN5_CH2 | |
| CX25840_NONE0_CH3, |
| }, { |
| .type = CX23885_VMUX_COMPOSITE1, |
| .vmux = CX25840_COMPOSITE1, |
| }, { |
| .type = CX23885_VMUX_SVIDEO, |
| .vmux = CX25840_SVIDEO_LUMA3 | |
| CX25840_SVIDEO_CHROMA4, |
| }, { |
| .type = CX23885_VMUX_COMPONENT, |
| .vmux = CX25840_VIN7_CH1 | |
| CX25840_VIN6_CH2 | |
| CX25840_VIN8_CH3 | |
| CX25840_COMPONENT_ON, |
| } }, |
| }, |
| [CX23885_BOARD_GOTVIEW_X5_3D_HYBRID] = { |
| .name = "GoTView X5 3D Hybrid", |
| .tuner_type = TUNER_XC5000, |
| .tuner_addr = 0x64, |
| .tuner_bus = 1, |
| .porta = CX23885_ANALOG_VIDEO, |
| .portb = CX23885_MPEG_DVB, |
| .input = {{ |
| .type = CX23885_VMUX_TELEVISION, |
| .vmux = CX25840_VIN2_CH1 | |
| CX25840_VIN5_CH2, |
| .gpio0 = 0x02, |
| }, { |
| .type = CX23885_VMUX_COMPOSITE1, |
| .vmux = CX23885_VMUX_COMPOSITE1, |
| }, { |
| .type = CX23885_VMUX_SVIDEO, |
| .vmux = CX25840_SVIDEO_LUMA3 | |
| CX25840_SVIDEO_CHROMA4, |
| } }, |
| }, |
| [CX23885_BOARD_NETUP_DUAL_DVB_T_C_CI_RF] = { |
| .ci_type = 2, |
| .name = "NetUP Dual DVB-T/C-CI RF", |
| .porta = CX23885_ANALOG_VIDEO, |
| .portb = CX23885_MPEG_DVB, |
| .portc = CX23885_MPEG_DVB, |
| .num_fds_portb = 2, |
| .num_fds_portc = 2, |
| .tuner_type = TUNER_XC5000, |
| .tuner_addr = 0x64, |
| .input = { { |
| .type = CX23885_VMUX_TELEVISION, |
| .vmux = CX25840_COMPOSITE1, |
| } }, |
| }, |
| [CX23885_BOARD_MPX885] = { |
| .name = "MPX-885", |
| .porta = CX23885_ANALOG_VIDEO, |
| .input = {{ |
| .type = CX23885_VMUX_COMPOSITE1, |
| .vmux = CX25840_COMPOSITE1, |
| .amux = CX25840_AUDIO6, |
| .gpio0 = 0, |
| }, { |
| .type = CX23885_VMUX_COMPOSITE2, |
| .vmux = CX25840_COMPOSITE2, |
| .amux = CX25840_AUDIO6, |
| .gpio0 = 0, |
| }, { |
| .type = CX23885_VMUX_COMPOSITE3, |
| .vmux = CX25840_COMPOSITE3, |
| .amux = CX25840_AUDIO7, |
| .gpio0 = 0, |
| }, { |
| .type = CX23885_VMUX_COMPOSITE4, |
| .vmux = CX25840_COMPOSITE4, |
| .amux = CX25840_AUDIO7, |
| .gpio0 = 0, |
| } }, |
| }, |
| [CX23885_BOARD_MYGICA_X8507] = { |
| .name = "Mygica X8507", |
| .tuner_type = TUNER_XC5000, |
| .tuner_addr = 0x61, |
| .tuner_bus = 1, |
| .porta = CX23885_ANALOG_VIDEO, |
| .input = { |
| { |
| .type = CX23885_VMUX_TELEVISION, |
| .vmux = CX25840_COMPOSITE2, |
| .amux = CX25840_AUDIO8, |
| }, |
| { |
| .type = CX23885_VMUX_COMPOSITE1, |
| .vmux = CX25840_COMPOSITE8, |
| }, |
| { |
| .type = CX23885_VMUX_SVIDEO, |
| .vmux = CX25840_SVIDEO_LUMA3 | |
| CX25840_SVIDEO_CHROMA4, |
| }, |
| { |
| .type = CX23885_VMUX_COMPONENT, |
| .vmux = CX25840_COMPONENT_ON | |
| CX25840_VIN1_CH1 | |
| CX25840_VIN6_CH2 | |
| CX25840_VIN7_CH3, |
| }, |
| }, |
| }, |
| [CX23885_BOARD_TERRATEC_CINERGY_T_PCIE_DUAL] = { |
| .name = "TerraTec Cinergy T PCIe Dual", |
| .portb = CX23885_MPEG_DVB, |
| .portc = CX23885_MPEG_DVB, |
| }, |
| [CX23885_BOARD_TEVII_S471] = { |
| .name = "TeVii S471", |
| .portb = CX23885_MPEG_DVB, |
| } |
| }; |
| const unsigned int cx23885_bcount = ARRAY_SIZE(cx23885_boards); |
| |
| /* ------------------------------------------------------------------ */ |
| /* PCI subsystem IDs */ |
| |
| struct cx23885_subid cx23885_subids[] = { |
| { |
| .subvendor = 0x0070, |
| .subdevice = 0x3400, |
| .card = CX23885_BOARD_UNKNOWN, |
| }, { |
| .subvendor = 0x0070, |
| .subdevice = 0x7600, |
| .card = CX23885_BOARD_HAUPPAUGE_HVR1800lp, |
| }, { |
| .subvendor = 0x0070, |
| .subdevice = 0x7800, |
| .card = CX23885_BOARD_HAUPPAUGE_HVR1800, |
| }, { |
| .subvendor = 0x0070, |
| .subdevice = 0x7801, |
| .card = CX23885_BOARD_HAUPPAUGE_HVR1800, |
| }, { |
| .subvendor = 0x0070, |
| .subdevice = 0x7809, |
| .card = CX23885_BOARD_HAUPPAUGE_HVR1800, |
| }, { |
| .subvendor = 0x0070, |
| .subdevice = 0x7911, |
| .card = CX23885_BOARD_HAUPPAUGE_HVR1250, |
| }, { |
| .subvendor = 0x18ac, |
| .subdevice = 0xd500, |
| .card = CX23885_BOARD_DVICO_FUSIONHDTV_5_EXP, |
| }, { |
| .subvendor = 0x0070, |
| .subdevice = 0x7790, |
| .card = CX23885_BOARD_HAUPPAUGE_HVR1500Q, |
| }, { |
| .subvendor = 0x0070, |
| .subdevice = 0x7797, |
| .card = CX23885_BOARD_HAUPPAUGE_HVR1500Q, |
| }, { |
| .subvendor = 0x0070, |
| .subdevice = 0x7710, |
| .card = CX23885_BOARD_HAUPPAUGE_HVR1500, |
| }, { |
| .subvendor = 0x0070, |
| .subdevice = 0x7717, |
| .card = CX23885_BOARD_HAUPPAUGE_HVR1500, |
| }, { |
| .subvendor = 0x0070, |
| .subdevice = 0x71d1, |
| .card = CX23885_BOARD_HAUPPAUGE_HVR1200, |
| }, { |
| .subvendor = 0x0070, |
| .subdevice = 0x71d3, |
| .card = CX23885_BOARD_HAUPPAUGE_HVR1200, |
| }, { |
| .subvendor = 0x0070, |
| .subdevice = 0x8101, |
| .card = CX23885_BOARD_HAUPPAUGE_HVR1700, |
| }, { |
| .subvendor = 0x0070, |
| .subdevice = 0x8010, |
| .card = CX23885_BOARD_HAUPPAUGE_HVR1400, |
| }, { |
| .subvendor = 0x18ac, |
| .subdevice = 0xd618, |
| .card = CX23885_BOARD_DVICO_FUSIONHDTV_7_DUAL_EXP, |
| }, { |
| .subvendor = 0x18ac, |
| .subdevice = 0xdb78, |
| .card = CX23885_BOARD_DVICO_FUSIONHDTV_DVB_T_DUAL_EXP, |
| }, { |
| .subvendor = 0x107d, |
| .subdevice = 0x6681, |
| .card = CX23885_BOARD_LEADTEK_WINFAST_PXDVR3200_H, |
| }, { |
| .subvendor = 0x107d, |
| .subdevice = 0x6f39, |
| .card = CX23885_BOARD_LEADTEK_WINFAST_PXDVR3200_H_XC4000, |
| }, { |
| .subvendor = 0x185b, |
| .subdevice = 0xe800, |
| .card = CX23885_BOARD_COMPRO_VIDEOMATE_E650F, |
| }, { |
| .subvendor = 0x6920, |
| .subdevice = 0x8888, |
| .card = CX23885_BOARD_TBS_6920, |
| }, { |
| .subvendor = 0xd470, |
| .subdevice = 0x9022, |
| .card = CX23885_BOARD_TEVII_S470, |
| }, { |
| .subvendor = 0x0001, |
| .subdevice = 0x2005, |
| .card = CX23885_BOARD_DVBWORLD_2005, |
| }, { |
| .subvendor = 0x1b55, |
| .subdevice = 0x2a2c, |
| .card = CX23885_BOARD_NETUP_DUAL_DVBS2_CI, |
| }, { |
| .subvendor = 0x0070, |
| .subdevice = 0x2211, |
| .card = CX23885_BOARD_HAUPPAUGE_HVR1270, |
| }, { |
| .subvendor = 0x0070, |
| .subdevice = 0x2215, |
| .card = CX23885_BOARD_HAUPPAUGE_HVR1275, |
| }, { |
| .subvendor = 0x0070, |
| .subdevice = 0x221d, |
| .card = CX23885_BOARD_HAUPPAUGE_HVR1275, |
| }, { |
| .subvendor = 0x0070, |
| .subdevice = 0x2251, |
| .card = CX23885_BOARD_HAUPPAUGE_HVR1255, |
| }, { |
| .subvendor = 0x0070, |
| .subdevice = 0x2259, |
| .card = CX23885_BOARD_HAUPPAUGE_HVR1255_22111, |
| }, { |
| .subvendor = 0x0070, |
| .subdevice = 0x2291, |
| .card = CX23885_BOARD_HAUPPAUGE_HVR1210, |
| }, { |
| .subvendor = 0x0070, |
| .subdevice = 0x2295, |
| .card = CX23885_BOARD_HAUPPAUGE_HVR1210, |
| }, { |
| .subvendor = 0x0070, |
| .subdevice = 0x2299, |
| .card = CX23885_BOARD_HAUPPAUGE_HVR1210, |
| }, { |
| .subvendor = 0x0070, |
| .subdevice = 0x229d, |
| .card = CX23885_BOARD_HAUPPAUGE_HVR1210, /* HVR1215 */ |
| }, { |
| .subvendor = 0x0070, |
| .subdevice = 0x22f0, |
| .card = CX23885_BOARD_HAUPPAUGE_HVR1210, |
| }, { |
| .subvendor = 0x0070, |
| .subdevice = 0x22f1, |
| .card = CX23885_BOARD_HAUPPAUGE_HVR1255, |
| }, { |
| .subvendor = 0x0070, |
| .subdevice = 0x22f2, |
| .card = CX23885_BOARD_HAUPPAUGE_HVR1275, |
| }, { |
| .subvendor = 0x0070, |
| .subdevice = 0x22f3, |
| .card = CX23885_BOARD_HAUPPAUGE_HVR1210, /* HVR1215 */ |
| }, { |
| .subvendor = 0x0070, |
| .subdevice = 0x22f4, |
| .card = CX23885_BOARD_HAUPPAUGE_HVR1210, |
| }, { |
| .subvendor = 0x0070, |
| .subdevice = 0x22f5, |
| .card = CX23885_BOARD_HAUPPAUGE_HVR1210, /* HVR1215 */ |
| }, { |
| .subvendor = 0x14f1, |
| .subdevice = 0x8651, |
| .card = CX23885_BOARD_MYGICA_X8506, |
| }, { |
| .subvendor = 0x14f1, |
| .subdevice = 0x8657, |
| .card = CX23885_BOARD_MAGICPRO_PROHDTVE2, |
| }, { |
| .subvendor = 0x0070, |
| .subdevice = 0x8541, |
| .card = CX23885_BOARD_HAUPPAUGE_HVR1850, |
| }, { |
| .subvendor = 0x1858, |
| .subdevice = 0xe800, |
| .card = CX23885_BOARD_COMPRO_VIDEOMATE_E800, |
| }, { |
| .subvendor = 0x0070, |
| .subdevice = 0x8551, |
| .card = CX23885_BOARD_HAUPPAUGE_HVR1290, |
| }, { |
| .subvendor = 0x14f1, |
| .subdevice = 0x8578, |
| .card = CX23885_BOARD_MYGICA_X8558PRO, |
| }, { |
| .subvendor = 0x107d, |
| .subdevice = 0x6f22, |
| .card = CX23885_BOARD_LEADTEK_WINFAST_PXTV1200, |
| }, { |
| .subvendor = 0x5654, |
| .subdevice = 0x2390, |
| .card = CX23885_BOARD_GOTVIEW_X5_3D_HYBRID, |
| }, { |
| .subvendor = 0x1b55, |
| .subdevice = 0xe2e4, |
| .card = CX23885_BOARD_NETUP_DUAL_DVB_T_C_CI_RF, |
| }, { |
| .subvendor = 0x14f1, |
| .subdevice = 0x8502, |
| .card = CX23885_BOARD_MYGICA_X8507, |
| }, { |
| .subvendor = 0x153b, |
| .subdevice = 0x117e, |
| .card = CX23885_BOARD_TERRATEC_CINERGY_T_PCIE_DUAL, |
| }, { |
| .subvendor = 0xd471, |
| .subdevice = 0x9022, |
| .card = CX23885_BOARD_TEVII_S471, |
| }, |
| }; |
| const unsigned int cx23885_idcount = ARRAY_SIZE(cx23885_subids); |
| |
| void cx23885_card_list(struct cx23885_dev *dev) |
| { |
| int i; |
| |
| if (0 == dev->pci->subsystem_vendor && |
| 0 == dev->pci->subsystem_device) { |
| printk(KERN_INFO |
| "%s: Board has no valid PCIe Subsystem ID and can't\n" |
| "%s: be autodetected. Pass card=<n> insmod option\n" |
| "%s: to workaround that. Redirect complaints to the\n" |
| "%s: vendor of the TV card. Best regards,\n" |
| "%s: -- tux\n", |
| dev->name, dev->name, dev->name, dev->name, dev->name); |
| } else { |
| printk(KERN_INFO |
| "%s: Your board isn't known (yet) to the driver.\n" |
| "%s: Try to pick one of the existing card configs via\n" |
| "%s: card=<n> insmod option. Updating to the latest\n" |
| "%s: version might help as well.\n", |
| dev->name, dev->name, dev->name, dev->name); |
| } |
| printk(KERN_INFO "%s: Here is a list of valid choices for the card=<n> insmod option:\n", |
| dev->name); |
| for (i = 0; i < cx23885_bcount; i++) |
| printk(KERN_INFO "%s: card=%d -> %s\n", |
| dev->name, i, cx23885_boards[i].name); |
| } |
| |
| static void hauppauge_eeprom(struct cx23885_dev *dev, u8 *eeprom_data) |
| { |
| struct tveeprom tv; |
| |
| tveeprom_hauppauge_analog(&dev->i2c_bus[0].i2c_client, &tv, |
| eeprom_data); |
| |
| /* Make sure we support the board model */ |
| switch (tv.model) { |
| case 22001: |
| /* WinTV-HVR1270 (PCIe, Retail, half height) |
| * ATSC/QAM and basic analog, IR Blast */ |
| case 22009: |
| /* WinTV-HVR1210 (PCIe, Retail, half height) |
| * DVB-T and basic analog, IR Blast */ |
| case 22011: |
| /* WinTV-HVR1270 (PCIe, Retail, half height) |
| * ATSC/QAM and basic analog, IR Recv */ |
| case 22019: |
| /* WinTV-HVR1210 (PCIe, Retail, half height) |
| * DVB-T and basic analog, IR Recv */ |
| case 22021: |
| /* WinTV-HVR1275 (PCIe, Retail, half height) |
| * ATSC/QAM and basic analog, IR Recv */ |
| case 22029: |
| /* WinTV-HVR1210 (PCIe, Retail, half height) |
| * DVB-T and basic analog, IR Recv */ |
| case 22101: |
| /* WinTV-HVR1270 (PCIe, Retail, full height) |
| * ATSC/QAM and basic analog, IR Blast */ |
| case 22109: |
| /* WinTV-HVR1210 (PCIe, Retail, full height) |
| * DVB-T and basic analog, IR Blast */ |
| case 22111: |
| /* WinTV-HVR1270 (PCIe, Retail, full height) |
| * ATSC/QAM and basic analog, IR Recv */ |
| case 22119: |
| /* WinTV-HVR1210 (PCIe, Retail, full height) |
| * DVB-T and basic analog, IR Recv */ |
| case 22121: |
| /* WinTV-HVR1275 (PCIe, Retail, full height) |
| * ATSC/QAM and basic analog, IR Recv */ |
| case 22129: |
| /* WinTV-HVR1210 (PCIe, Retail, full height) |
| * DVB-T and basic analog, IR Recv */ |
| case 71009: |
| /* WinTV-HVR1200 (PCIe, Retail, full height) |
| * DVB-T and basic analog */ |
| case 71359: |
| /* WinTV-HVR1200 (PCIe, OEM, half height) |
| * DVB-T and basic analog */ |
| case 71439: |
| /* WinTV-HVR1200 (PCIe, OEM, half height) |
| * DVB-T and basic analog */ |
| case 71449: |
| /* WinTV-HVR1200 (PCIe, OEM, full height) |
| * DVB-T and basic analog */ |
| case 71939: |
| /* WinTV-HVR1200 (PCIe, OEM, half height) |
| * DVB-T and basic analog */ |
| case 71949: |
| /* WinTV-HVR1200 (PCIe, OEM, full height) |
| * DVB-T and basic analog */ |
| case 71959: |
| /* WinTV-HVR1200 (PCIe, OEM, full height) |
| * DVB-T and basic analog */ |
| case 71979: |
| /* WinTV-HVR1200 (PCIe, OEM, half height) |
| * DVB-T and basic analog */ |
| case 71999: |
| /* WinTV-HVR1200 (PCIe, OEM, full height) |
| * DVB-T and basic analog */ |
| case 76601: |
| /* WinTV-HVR1800lp (PCIe, Retail, No IR, Dual |
| channel ATSC and MPEG2 HW Encoder */ |
| case 77001: |
| /* WinTV-HVR1500 (Express Card, OEM, No IR, ATSC |
| and Basic analog */ |
| case 77011: |
| /* WinTV-HVR1500 (Express Card, Retail, No IR, ATSC |
| and Basic analog */ |
| case 77041: |
| /* WinTV-HVR1500Q (Express Card, OEM, No IR, ATSC/QAM |
| and Basic analog */ |
| case 77051: |
| /* WinTV-HVR1500Q (Express Card, Retail, No IR, ATSC/QAM |
| and Basic analog */ |
| case 78011: |
| /* WinTV-HVR1800 (PCIe, Retail, 3.5mm in, IR, No FM, |
| Dual channel ATSC and MPEG2 HW Encoder */ |
| case 78501: |
| /* WinTV-HVR1800 (PCIe, OEM, RCA in, No IR, FM, |
| Dual channel ATSC and MPEG2 HW Encoder */ |
| case 78521: |
| /* WinTV-HVR1800 (PCIe, OEM, RCA in, No IR, FM, |
| Dual channel ATSC and MPEG2 HW Encoder */ |
| case 78531: |
| /* WinTV-HVR1800 (PCIe, OEM, RCA in, No IR, No FM, |
| Dual channel ATSC and MPEG2 HW Encoder */ |
| case 78631: |
| /* WinTV-HVR1800 (PCIe, OEM, No IR, No FM, |
| Dual channel ATSC and MPEG2 HW Encoder */ |
| case 79001: |
| /* WinTV-HVR1250 (PCIe, Retail, IR, full height, |
| ATSC and Basic analog */ |
| case 79101: |
| /* WinTV-HVR1250 (PCIe, Retail, IR, half height, |
| ATSC and Basic analog */ |
| case 79501: |
| /* WinTV-HVR1250 (PCIe, No IR, half height, |
| ATSC [at least] and Basic analog) */ |
| case 79561: |
| /* WinTV-HVR1250 (PCIe, OEM, No IR, half height, |
| ATSC and Basic analog */ |
| case 79571: |
| /* WinTV-HVR1250 (PCIe, OEM, No IR, full height, |
| ATSC and Basic analog */ |
| case 79671: |
| /* WinTV-HVR1250 (PCIe, OEM, No IR, half height, |
| ATSC and Basic analog */ |
| case 80019: |
| /* WinTV-HVR1400 (Express Card, Retail, IR, |
| * DVB-T and Basic analog */ |
| case 81509: |
| /* WinTV-HVR1700 (PCIe, OEM, No IR, half height) |
| * DVB-T and MPEG2 HW Encoder */ |
| case 81519: |
| /* WinTV-HVR1700 (PCIe, OEM, No IR, full height) |
| * DVB-T and MPEG2 HW Encoder */ |
| break; |
| case 85021: |
| /* WinTV-HVR1850 (PCIe, Retail, 3.5mm in, IR, FM, |
| Dual channel ATSC and MPEG2 HW Encoder */ |
| break; |
| case 85721: |
| /* WinTV-HVR1290 (PCIe, OEM, RCA in, IR, |
| Dual channel ATSC and Basic analog */ |
| break; |
| default: |
| printk(KERN_WARNING "%s: warning: " |
| "unknown hauppauge model #%d\n", |
| dev->name, tv.model); |
| break; |
| } |
| |
| printk(KERN_INFO "%s: hauppauge eeprom: model=%d\n", |
| dev->name, tv.model); |
| } |
| |
| int cx23885_tuner_callback(void *priv, int component, int command, int arg) |
| { |
| struct cx23885_tsport *port = priv; |
| struct cx23885_dev *dev = port->dev; |
| u32 bitmask = 0; |
| |
| if ((command == XC2028_RESET_CLK) || (command == XC2028_I2C_FLUSH)) |
| return 0; |
| |
| if (command != 0) { |
| printk(KERN_ERR "%s(): Unknown command 0x%x.\n", |
| __func__, command); |
| return -EINVAL; |
| } |
| |
| switch (dev->board) { |
| case CX23885_BOARD_HAUPPAUGE_HVR1400: |
| case CX23885_BOARD_HAUPPAUGE_HVR1500: |
| case CX23885_BOARD_HAUPPAUGE_HVR1500Q: |
| case CX23885_BOARD_LEADTEK_WINFAST_PXDVR3200_H: |
| case CX23885_BOARD_LEADTEK_WINFAST_PXDVR3200_H_XC4000: |
| case CX23885_BOARD_COMPRO_VIDEOMATE_E650F: |
| case CX23885_BOARD_COMPRO_VIDEOMATE_E800: |
| case CX23885_BOARD_LEADTEK_WINFAST_PXTV1200: |
| /* Tuner Reset Command */ |
| bitmask = 0x04; |
| break; |
| case CX23885_BOARD_DVICO_FUSIONHDTV_7_DUAL_EXP: |
| case CX23885_BOARD_DVICO_FUSIONHDTV_DVB_T_DUAL_EXP: |
| /* Two identical tuners on two different i2c buses, |
| * we need to reset the correct gpio. */ |
| if (port->nr == 1) |
| bitmask = 0x01; |
| else if (port->nr == 2) |
| bitmask = 0x04; |
| break; |
| case CX23885_BOARD_GOTVIEW_X5_3D_HYBRID: |
| /* Tuner Reset Command */ |
| bitmask = 0x02; |
| break; |
| case CX23885_BOARD_NETUP_DUAL_DVB_T_C_CI_RF: |
| altera_ci_tuner_reset(dev, port->nr); |
| break; |
| } |
| |
| if (bitmask) { |
| /* Drive the tuner into reset and back out */ |
| cx_clear(GP0_IO, bitmask); |
| mdelay(200); |
| cx_set(GP0_IO, bitmask); |
| } |
| |
| return 0; |
| } |
| |
| void cx23885_gpio_setup(struct cx23885_dev *dev) |
| { |
| switch (dev->board) { |
| case CX23885_BOARD_HAUPPAUGE_HVR1250: |
| /* GPIO-0 cx24227 demodulator reset */ |
| cx_set(GP0_IO, 0x00010001); /* Bring the part out of reset */ |
| break; |
| case CX23885_BOARD_HAUPPAUGE_HVR1500: |
| /* GPIO-0 cx24227 demodulator */ |
| /* GPIO-2 xc3028 tuner */ |
| |
| /* Put the parts into reset */ |
| cx_set(GP0_IO, 0x00050000); |
| cx_clear(GP0_IO, 0x00000005); |
| msleep(5); |
| |
| /* Bring the parts out of reset */ |
| cx_set(GP0_IO, 0x00050005); |
| break; |
| case CX23885_BOARD_HAUPPAUGE_HVR1500Q: |
| /* GPIO-0 cx24227 demodulator reset */ |
| /* GPIO-2 xc5000 tuner reset */ |
| cx_set(GP0_IO, 0x00050005); /* Bring the part out of reset */ |
| break; |
| case CX23885_BOARD_HAUPPAUGE_HVR1800: |
| /* GPIO-0 656_CLK */ |
| /* GPIO-1 656_D0 */ |
| /* GPIO-2 8295A Reset */ |
| /* GPIO-3-10 cx23417 data0-7 */ |
| /* GPIO-11-14 cx23417 addr0-3 */ |
| /* GPIO-15-18 cx23417 READY, CS, RD, WR */ |
| /* GPIO-19 IR_RX */ |
| |
| /* CX23417 GPIO's */ |
| /* EIO15 Zilog Reset */ |
| /* EIO14 S5H1409/CX24227 Reset */ |
| mc417_gpio_enable(dev, GPIO_15 | GPIO_14, 1); |
| |
| /* Put the demod into reset and protect the eeprom */ |
| mc417_gpio_clear(dev, GPIO_15 | GPIO_14); |
| mdelay(100); |
| |
| /* Bring the demod and blaster out of reset */ |
| mc417_gpio_set(dev, GPIO_15 | GPIO_14); |
| mdelay(100); |
| |
| /* Force the TDA8295A into reset and back */ |
| cx23885_gpio_enable(dev, GPIO_2, 1); |
| cx23885_gpio_set(dev, GPIO_2); |
| mdelay(20); |
| cx23885_gpio_clear(dev, GPIO_2); |
| mdelay(20); |
| cx23885_gpio_set(dev, GPIO_2); |
| mdelay(20); |
| break; |
| case CX23885_BOARD_HAUPPAUGE_HVR1200: |
| /* GPIO-0 tda10048 demodulator reset */ |
| /* GPIO-2 tda18271 tuner reset */ |
| |
| /* Put the parts into reset and back */ |
| cx_set(GP0_IO, 0x00050000); |
| mdelay(20); |
| cx_clear(GP0_IO, 0x00000005); |
| mdelay(20); |
| cx_set(GP0_IO, 0x00050005); |
| break; |
| case CX23885_BOARD_HAUPPAUGE_HVR1700: |
| /* GPIO-0 TDA10048 demodulator reset */ |
| /* GPIO-2 TDA8295A Reset */ |
| /* GPIO-3-10 cx23417 data0-7 */ |
| /* GPIO-11-14 cx23417 addr0-3 */ |
| /* GPIO-15-18 cx23417 READY, CS, RD, WR */ |
| |
| /* The following GPIO's are on the interna AVCore (cx25840) */ |
| /* GPIO-19 IR_RX */ |
| /* GPIO-20 IR_TX 416/DVBT Select */ |
| /* GPIO-21 IIS DAT */ |
| /* GPIO-22 IIS WCLK */ |
| /* GPIO-23 IIS BCLK */ |
| |
| /* Put the parts into reset and back */ |
| cx_set(GP0_IO, 0x00050000); |
| mdelay(20); |
| cx_clear(GP0_IO, 0x00000005); |
| mdelay(20); |
| cx_set(GP0_IO, 0x00050005); |
| break; |
| case CX23885_BOARD_HAUPPAUGE_HVR1400: |
| /* GPIO-0 Dibcom7000p demodulator reset */ |
| /* GPIO-2 xc3028L tuner reset */ |
| /* GPIO-13 LED */ |
| |
| /* Put the parts into reset and back */ |
| cx_set(GP0_IO, 0x00050000); |
| mdelay(20); |
| cx_clear(GP0_IO, 0x00000005); |
| mdelay(20); |
| cx_set(GP0_IO, 0x00050005); |
| break; |
| case CX23885_BOARD_DVICO_FUSIONHDTV_7_DUAL_EXP: |
| /* GPIO-0 xc5000 tuner reset i2c bus 0 */ |
| /* GPIO-1 s5h1409 demod reset i2c bus 0 */ |
| /* GPIO-2 xc5000 tuner reset i2c bus 1 */ |
| /* GPIO-3 s5h1409 demod reset i2c bus 0 */ |
| |
| /* Put the parts into reset and back */ |
| cx_set(GP0_IO, 0x000f0000); |
| mdelay(20); |
| cx_clear(GP0_IO, 0x0000000f); |
| mdelay(20); |
| cx_set(GP0_IO, 0x000f000f); |
| break; |
| case CX23885_BOARD_DVICO_FUSIONHDTV_DVB_T_DUAL_EXP: |
| /* GPIO-0 portb xc3028 reset */ |
| /* GPIO-1 portb zl10353 reset */ |
| /* GPIO-2 portc xc3028 reset */ |
| /* GPIO-3 portc zl10353 reset */ |
| |
| /* Put the parts into reset and back */ |
| cx_set(GP0_IO, 0x000f0000); |
| mdelay(20); |
| cx_clear(GP0_IO, 0x0000000f); |
| mdelay(20); |
| cx_set(GP0_IO, 0x000f000f); |
| break; |
| case CX23885_BOARD_LEADTEK_WINFAST_PXDVR3200_H: |
| case CX23885_BOARD_LEADTEK_WINFAST_PXDVR3200_H_XC4000: |
| case CX23885_BOARD_COMPRO_VIDEOMATE_E650F: |
| case CX23885_BOARD_COMPRO_VIDEOMATE_E800: |
| case CX23885_BOARD_LEADTEK_WINFAST_PXTV1200: |
| /* GPIO-2 xc3028 tuner reset */ |
| |
| /* The following GPIO's are on the internal AVCore (cx25840) */ |
| /* GPIO-? zl10353 demod reset */ |
| |
| /* Put the parts into reset and back */ |
| cx_set(GP0_IO, 0x00040000); |
| mdelay(20); |
| cx_clear(GP0_IO, 0x00000004); |
| mdelay(20); |
| cx_set(GP0_IO, 0x00040004); |
| break; |
| case CX23885_BOARD_TBS_6920: |
| cx_write(MC417_CTL, 0x00000036); |
| cx_write(MC417_OEN, 0x00001000); |
| cx_set(MC417_RWD, 0x00000002); |
| mdelay(200); |
| cx_clear(MC417_RWD, 0x00000800); |
| mdelay(200); |
| cx_set(MC417_RWD, 0x00000800); |
| mdelay(200); |
| break; |
| case CX23885_BOARD_NETUP_DUAL_DVBS2_CI: |
| /* GPIO-0 INTA from CiMax1 |
| GPIO-1 INTB from CiMax2 |
| GPIO-2 reset chips |
| GPIO-3 to GPIO-10 data/addr for CA |
| GPIO-11 ~CS0 to CiMax1 |
| GPIO-12 ~CS1 to CiMax2 |
| GPIO-13 ADL0 load LSB addr |
| GPIO-14 ADL1 load MSB addr |
| GPIO-15 ~RDY from CiMax |
| GPIO-17 ~RD to CiMax |
| GPIO-18 ~WR to CiMax |
| */ |
| cx_set(GP0_IO, 0x00040000); /* GPIO as out */ |
| /* GPIO1 and GPIO2 as INTA and INTB from CiMaxes, reset low */ |
| cx_clear(GP0_IO, 0x00030004); |
| mdelay(100);/* reset delay */ |
| cx_set(GP0_IO, 0x00040004); /* GPIO as out, reset high */ |
| cx_write(MC417_CTL, 0x00000037);/* enable GPIO3-18 pins */ |
| /* GPIO-15 IN as ~ACK, rest as OUT */ |
| cx_write(MC417_OEN, 0x00001000); |
| /* ~RD, ~WR high; ADL0, ADL1 low; ~CS0, ~CS1 high */ |
| cx_write(MC417_RWD, 0x0000c300); |
| /* enable irq */ |
| cx_write(GPIO_ISM, 0x00000000);/* INTERRUPTS active low*/ |
| break; |
| case CX23885_BOARD_HAUPPAUGE_HVR1270: |
| case CX23885_BOARD_HAUPPAUGE_HVR1275: |
| case CX23885_BOARD_HAUPPAUGE_HVR1255: |
| case CX23885_BOARD_HAUPPAUGE_HVR1255_22111: |
| case CX23885_BOARD_HAUPPAUGE_HVR1210: |
| /* GPIO-5 RF Control: 0 = RF1 Terrestrial, 1 = RF2 Cable */ |
| /* GPIO-6 I2C Gate which can isolate the demod from the bus */ |
| /* GPIO-9 Demod reset */ |
| |
| /* Put the parts into reset and back */ |
| cx23885_gpio_enable(dev, GPIO_9 | GPIO_6 | GPIO_5, 1); |
| cx23885_gpio_set(dev, GPIO_9 | GPIO_6 | GPIO_5); |
| cx23885_gpio_clear(dev, GPIO_9); |
| mdelay(20); |
| cx23885_gpio_set(dev, GPIO_9); |
| break; |
| case CX23885_BOARD_MYGICA_X8506: |
| case CX23885_BOARD_MAGICPRO_PROHDTVE2: |
| case CX23885_BOARD_MYGICA_X8507: |
| /* GPIO-0 (0)Analog / (1)Digital TV */ |
| /* GPIO-1 reset XC5000 */ |
| /* GPIO-2 reset LGS8GL5 / LGS8G75 */ |
| cx23885_gpio_enable(dev, GPIO_0 | GPIO_1 | GPIO_2, 1); |
| cx23885_gpio_clear(dev, GPIO_1 | GPIO_2); |
| mdelay(100); |
| cx23885_gpio_set(dev, GPIO_0 | GPIO_1 | GPIO_2); |
| mdelay(100); |
| break; |
| case CX23885_BOARD_MYGICA_X8558PRO: |
| /* GPIO-0 reset first ATBM8830 */ |
| /* GPIO-1 reset second ATBM8830 */ |
| cx23885_gpio_enable(dev, GPIO_0 | GPIO_1, 1); |
| cx23885_gpio_clear(dev, GPIO_0 | GPIO_1); |
| mdelay(100); |
| cx23885_gpio_set(dev, GPIO_0 | GPIO_1); |
| mdelay(100); |
| break; |
| case CX23885_BOARD_HAUPPAUGE_HVR1850: |
| case CX23885_BOARD_HAUPPAUGE_HVR1290: |
| /* GPIO-0 656_CLK */ |
| /* GPIO-1 656_D0 */ |
| /* GPIO-2 Wake# */ |
| /* GPIO-3-10 cx23417 data0-7 */ |
| /* GPIO-11-14 cx23417 addr0-3 */ |
| /* GPIO-15-18 cx23417 READY, CS, RD, WR */ |
| /* GPIO-19 IR_RX */ |
| /* GPIO-20 C_IR_TX */ |
| /* GPIO-21 I2S DAT */ |
| /* GPIO-22 I2S WCLK */ |
| /* GPIO-23 I2S BCLK */ |
| /* ALT GPIO: EXP GPIO LATCH */ |
| |
| /* CX23417 GPIO's */ |
| /* GPIO-14 S5H1411/CX24228 Reset */ |
| /* GPIO-13 EEPROM write protect */ |
| mc417_gpio_enable(dev, GPIO_14 | GPIO_13, 1); |
| |
| /* Put the demod into reset and protect the eeprom */ |
| mc417_gpio_clear(dev, GPIO_14 | GPIO_13); |
| mdelay(100); |
| |
| /* Bring the demod out of reset */ |
| mc417_gpio_set(dev, GPIO_14); |
| mdelay(100); |
| |
| /* CX24228 GPIO */ |
| /* Connected to IF / Mux */ |
| break; |
| case CX23885_BOARD_GOTVIEW_X5_3D_HYBRID: |
| cx_set(GP0_IO, 0x00010001); /* Bring the part out of reset */ |
| break; |
| case CX23885_BOARD_NETUP_DUAL_DVB_T_C_CI_RF: |
| /* GPIO-0 ~INT in |
| GPIO-1 TMS out |
| GPIO-2 ~reset chips out |
| GPIO-3 to GPIO-10 data/addr for CA in/out |
| GPIO-11 ~CS out |
| GPIO-12 ADDR out |
| GPIO-13 ~WR out |
| GPIO-14 ~RD out |
| GPIO-15 ~RDY in |
| GPIO-16 TCK out |
| GPIO-17 TDO in |
| GPIO-18 TDI out |
| */ |
| cx_set(GP0_IO, 0x00060000); /* GPIO-1,2 as out */ |
| /* GPIO-0 as INT, reset & TMS low */ |
| cx_clear(GP0_IO, 0x00010006); |
| mdelay(100);/* reset delay */ |
| cx_set(GP0_IO, 0x00000004); /* reset high */ |
| cx_write(MC417_CTL, 0x00000037);/* enable GPIO-3..18 pins */ |
| /* GPIO-17 is TDO in, GPIO-15 is ~RDY in, rest is out */ |
| cx_write(MC417_OEN, 0x00005000); |
| /* ~RD, ~WR high; ADDR low; ~CS high */ |
| cx_write(MC417_RWD, 0x00000d00); |
| /* enable irq */ |
| cx_write(GPIO_ISM, 0x00000000);/* INTERRUPTS active low*/ |
| break; |
| } |
| } |
| |
| int cx23885_ir_init(struct cx23885_dev *dev) |
| { |
| static struct v4l2_subdev_io_pin_config ir_rxtx_pin_cfg[] = { |
| { |
| .flags = V4L2_SUBDEV_IO_PIN_INPUT, |
| .pin = CX23885_PIN_IR_RX_GPIO19, |
| .function = CX23885_PAD_IR_RX, |
| .value = 0, |
| .strength = CX25840_PIN_DRIVE_MEDIUM, |
| }, { |
| .flags = V4L2_SUBDEV_IO_PIN_OUTPUT, |
| .pin = CX23885_PIN_IR_TX_GPIO20, |
| .function = CX23885_PAD_IR_TX, |
| .value = 0, |
| .strength = CX25840_PIN_DRIVE_MEDIUM, |
| } |
| }; |
| const size_t ir_rxtx_pin_cfg_count = ARRAY_SIZE(ir_rxtx_pin_cfg); |
| |
| static struct v4l2_subdev_io_pin_config ir_rx_pin_cfg[] = { |
| { |
| .flags = V4L2_SUBDEV_IO_PIN_INPUT, |
| .pin = CX23885_PIN_IR_RX_GPIO19, |
| .function = CX23885_PAD_IR_RX, |
| .value = 0, |
| .strength = CX25840_PIN_DRIVE_MEDIUM, |
| } |
| }; |
| const size_t ir_rx_pin_cfg_count = ARRAY_SIZE(ir_rx_pin_cfg); |
| |
| struct v4l2_subdev_ir_parameters params; |
| int ret = 0; |
| switch (dev->board) { |
| case CX23885_BOARD_HAUPPAUGE_HVR1500: |
| case CX23885_BOARD_HAUPPAUGE_HVR1500Q: |
| case CX23885_BOARD_HAUPPAUGE_HVR1800: |
| case CX23885_BOARD_HAUPPAUGE_HVR1200: |
| case CX23885_BOARD_HAUPPAUGE_HVR1400: |
| case CX23885_BOARD_HAUPPAUGE_HVR1275: |
| case CX23885_BOARD_HAUPPAUGE_HVR1255: |
| case CX23885_BOARD_HAUPPAUGE_HVR1255_22111: |
| case CX23885_BOARD_HAUPPAUGE_HVR1210: |
| /* FIXME: Implement me */ |
| break; |
| case CX23885_BOARD_HAUPPAUGE_HVR1270: |
| ret = cx23888_ir_probe(dev); |
| if (ret) |
| break; |
| dev->sd_ir = cx23885_find_hw(dev, CX23885_HW_888_IR); |
| v4l2_subdev_call(dev->sd_cx25840, core, s_io_pin_config, |
| ir_rx_pin_cfg_count, ir_rx_pin_cfg); |
| break; |
| case CX23885_BOARD_HAUPPAUGE_HVR1850: |
| case CX23885_BOARD_HAUPPAUGE_HVR1290: |
| ret = cx23888_ir_probe(dev); |
| if (ret) |
| break; |
| dev->sd_ir = cx23885_find_hw(dev, CX23885_HW_888_IR); |
| v4l2_subdev_call(dev->sd_cx25840, core, s_io_pin_config, |
| ir_rxtx_pin_cfg_count, ir_rxtx_pin_cfg); |
| /* |
| * For these boards we need to invert the Tx output via the |
| * IR controller to have the LED off while idle |
| */ |
| v4l2_subdev_call(dev->sd_ir, ir, tx_g_parameters, ¶ms); |
| params.enable = false; |
| params.shutdown = false; |
| params.invert_level = true; |
| v4l2_subdev_call(dev->sd_ir, ir, tx_s_parameters, ¶ms); |
| params.shutdown = true; |
| v4l2_subdev_call(dev->sd_ir, ir, tx_s_parameters, ¶ms); |
| break; |
| case CX23885_BOARD_TEVII_S470: |
| if (!enable_885_ir) |
| break; |
| dev->sd_ir = cx23885_find_hw(dev, CX23885_HW_AV_CORE); |
| if (dev->sd_ir == NULL) { |
| ret = -ENODEV; |
| break; |
| } |
| v4l2_subdev_call(dev->sd_cx25840, core, s_io_pin_config, |
| ir_rx_pin_cfg_count, ir_rx_pin_cfg); |
| break; |
| case CX23885_BOARD_HAUPPAUGE_HVR1250: |
| if (!enable_885_ir) |
| break; |
| dev->sd_ir = cx23885_find_hw(dev, CX23885_HW_AV_CORE); |
| if (dev->sd_ir == NULL) { |
| ret = -ENODEV; |
| break; |
| } |
| v4l2_subdev_call(dev->sd_cx25840, core, s_io_pin_config, |
| ir_rxtx_pin_cfg_count, ir_rxtx_pin_cfg); |
| break; |
| case CX23885_BOARD_DVICO_FUSIONHDTV_DVB_T_DUAL_EXP: |
| request_module("ir-kbd-i2c"); |
| break; |
| } |
| |
| return ret; |
| } |
| |
| void cx23885_ir_fini(struct cx23885_dev *dev) |
| { |
| switch (dev->board) { |
| case CX23885_BOARD_HAUPPAUGE_HVR1270: |
| case CX23885_BOARD_HAUPPAUGE_HVR1850: |
| case CX23885_BOARD_HAUPPAUGE_HVR1290: |
| cx23885_irq_remove(dev, PCI_MSK_IR); |
| cx23888_ir_remove(dev); |
| dev->sd_ir = NULL; |
| break; |
| case CX23885_BOARD_TEVII_S470: |
| case CX23885_BOARD_HAUPPAUGE_HVR1250: |
| cx23885_irq_remove(dev, PCI_MSK_AV_CORE); |
| /* sd_ir is a duplicate pointer to the AV Core, just clear it */ |
| dev->sd_ir = NULL; |
| break; |
| } |
| } |
| |
| int netup_jtag_io(void *device, int tms, int tdi, int read_tdo) |
| { |
| int data; |
| int tdo = 0; |
| struct cx23885_dev *dev = (struct cx23885_dev *)device; |
| /*TMS*/ |
| data = ((cx_read(GP0_IO)) & (~0x00000002)); |
| data |= (tms ? 0x00020002 : 0x00020000); |
| cx_write(GP0_IO, data); |
| |
| /*TDI*/ |
| data = ((cx_read(MC417_RWD)) & (~0x0000a000)); |
| data |= (tdi ? 0x00008000 : 0); |
| cx_write(MC417_RWD, data); |
| if (read_tdo) |
| tdo = (data & 0x00004000) ? 1 : 0; /*TDO*/ |
| |
| cx_write(MC417_RWD, data | 0x00002000); |
| udelay(1); |
| /*TCK*/ |
| cx_write(MC417_RWD, data); |
| |
| return tdo; |
| } |
| |
| void cx23885_ir_pci_int_enable(struct cx23885_dev *dev) |
| { |
| switch (dev->board) { |
| case CX23885_BOARD_HAUPPAUGE_HVR1270: |
| case CX23885_BOARD_HAUPPAUGE_HVR1850: |
| case CX23885_BOARD_HAUPPAUGE_HVR1290: |
| if (dev->sd_ir) |
| cx23885_irq_add_enable(dev, PCI_MSK_IR); |
| break; |
| case CX23885_BOARD_TEVII_S470: |
| case CX23885_BOARD_HAUPPAUGE_HVR1250: |
| if (dev->sd_ir) |
| cx23885_irq_add_enable(dev, PCI_MSK_AV_CORE); |
| break; |
| } |
| } |
| |
| void cx23885_card_setup(struct cx23885_dev *dev) |
| { |
| struct cx23885_tsport *ts1 = &dev->ts1; |
| struct cx23885_tsport *ts2 = &dev->ts2; |
| |
| static u8 eeprom[256]; |
| |
| if (dev->i2c_bus[0].i2c_rc == 0) { |
| dev->i2c_bus[0].i2c_client.addr = 0xa0 >> 1; |
| tveeprom_read(&dev->i2c_bus[0].i2c_client, |
| eeprom, sizeof(eeprom)); |
| } |
| |
| switch (dev->board) { |
| case CX23885_BOARD_HAUPPAUGE_HVR1250: |
| if (dev->i2c_bus[0].i2c_rc == 0) { |
| if (eeprom[0x80] != 0x84) |
| hauppauge_eeprom(dev, eeprom+0xc0); |
| else |
| hauppauge_eeprom(dev, eeprom+0x80); |
| } |
| break; |
| case CX23885_BOARD_HAUPPAUGE_HVR1500: |
| case CX23885_BOARD_HAUPPAUGE_HVR1500Q: |
| case CX23885_BOARD_HAUPPAUGE_HVR1400: |
| if (dev->i2c_bus[0].i2c_rc == 0) |
| hauppauge_eeprom(dev, eeprom+0x80); |
| break; |
| case CX23885_BOARD_HAUPPAUGE_HVR1800: |
| case CX23885_BOARD_HAUPPAUGE_HVR1800lp: |
| case CX23885_BOARD_HAUPPAUGE_HVR1200: |
| case CX23885_BOARD_HAUPPAUGE_HVR1700: |
| case CX23885_BOARD_HAUPPAUGE_HVR1270: |
| case CX23885_BOARD_HAUPPAUGE_HVR1275: |
| case CX23885_BOARD_HAUPPAUGE_HVR1255: |
| case CX23885_BOARD_HAUPPAUGE_HVR1255_22111: |
| case CX23885_BOARD_HAUPPAUGE_HVR1210: |
| case CX23885_BOARD_HAUPPAUGE_HVR1850: |
| case CX23885_BOARD_HAUPPAUGE_HVR1290: |
| if (dev->i2c_bus[0].i2c_rc == 0) |
| hauppauge_eeprom(dev, eeprom+0xc0); |
| break; |
| } |
| |
| switch (dev->board) { |
| case CX23885_BOARD_DVICO_FUSIONHDTV_7_DUAL_EXP: |
| case CX23885_BOARD_DVICO_FUSIONHDTV_DVB_T_DUAL_EXP: |
| ts2->gen_ctrl_val = 0xc; /* Serial bus + punctured clock */ |
| ts2->ts_clk_en_val = 0x1; /* Enable TS_CLK */ |
| ts2->src_sel_val = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO; |
| /* break omitted intentionally */ |
| case CX23885_BOARD_DVICO_FUSIONHDTV_5_EXP: |
| ts1->gen_ctrl_val = 0xc; /* Serial bus + punctured clock */ |
| ts1->ts_clk_en_val = 0x1; /* Enable TS_CLK */ |
| ts1->src_sel_val = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO; |
| break; |
| case CX23885_BOARD_HAUPPAUGE_HVR1850: |
| case CX23885_BOARD_HAUPPAUGE_HVR1800: |
| /* Defaults for VID B - Analog encoder */ |
| /* DREQ_POL, SMODE, PUNC_CLK, MCLK_POL Serial bus + punc clk */ |
| ts1->gen_ctrl_val = 0x10e; |
| ts1->ts_clk_en_val = 0x1; /* Enable TS_CLK */ |
| ts1->src_sel_val = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO; |
| |
| /* APB_TSVALERR_POL (active low)*/ |
| ts1->vld_misc_val = 0x2000; |
| ts1->hw_sop_ctrl_val = (0x47 << 16 | 188 << 4 | 0xc); |
| cx_write(0x130184, 0xc); |
| |
| /* Defaults for VID C */ |
| ts2->gen_ctrl_val = 0xc; /* Serial bus + punctured clock */ |
| ts2->ts_clk_en_val = 0x1; /* Enable TS_CLK */ |
| ts2->src_sel_val = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO; |
| break; |
| case CX23885_BOARD_TBS_6920: |
| ts1->gen_ctrl_val = 0x4; /* Parallel */ |
| ts1->ts_clk_en_val = 0x1; /* Enable TS_CLK */ |
| ts1->src_sel_val = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO; |
| break; |
| case CX23885_BOARD_TEVII_S470: |
| case CX23885_BOARD_TEVII_S471: |
| case CX23885_BOARD_DVBWORLD_2005: |
| ts1->gen_ctrl_val = 0x5; /* Parallel */ |
| ts1->ts_clk_en_val = 0x1; /* Enable TS_CLK */ |
| ts1->src_sel_val = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO; |
| break; |
| case CX23885_BOARD_NETUP_DUAL_DVBS2_CI: |
| case CX23885_BOARD_NETUP_DUAL_DVB_T_C_CI_RF: |
| case CX23885_BOARD_TERRATEC_CINERGY_T_PCIE_DUAL: |
| ts1->gen_ctrl_val = 0xc; /* Serial bus + punctured clock */ |
| ts1->ts_clk_en_val = 0x1; /* Enable TS_CLK */ |
| ts1->src_sel_val = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO; |
| ts2->gen_ctrl_val = 0xc; /* Serial bus + punctured clock */ |
| ts2->ts_clk_en_val = 0x1; /* Enable TS_CLK */ |
| ts2->src_sel_val = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO; |
| break; |
| case CX23885_BOARD_MYGICA_X8506: |
| case CX23885_BOARD_MAGICPRO_PROHDTVE2: |
| ts1->gen_ctrl_val = 0x5; /* Parallel */ |
| ts1->ts_clk_en_val = 0x1; /* Enable TS_CLK */ |
| ts1->src_sel_val = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO; |
| break; |
| case CX23885_BOARD_MYGICA_X8558PRO: |
| ts1->gen_ctrl_val = 0x5; /* Parallel */ |
| ts1->ts_clk_en_val = 0x1; /* Enable TS_CLK */ |
| ts1->src_sel_val = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO; |
| ts2->gen_ctrl_val = 0xc; /* Serial bus + punctured clock */ |
| ts2->ts_clk_en_val = 0x1; /* Enable TS_CLK */ |
| ts2->src_sel_val = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO; |
| break; |
| case CX23885_BOARD_HAUPPAUGE_HVR1250: |
| case CX23885_BOARD_HAUPPAUGE_HVR1500: |
| case CX23885_BOARD_HAUPPAUGE_HVR1500Q: |
| case CX23885_BOARD_HAUPPAUGE_HVR1800lp: |
| case CX23885_BOARD_HAUPPAUGE_HVR1200: |
| case CX23885_BOARD_HAUPPAUGE_HVR1700: |
| case CX23885_BOARD_HAUPPAUGE_HVR1400: |
| case CX23885_BOARD_LEADTEK_WINFAST_PXDVR3200_H: |
| case CX23885_BOARD_LEADTEK_WINFAST_PXDVR3200_H_XC4000: |
| case CX23885_BOARD_COMPRO_VIDEOMATE_E650F: |
| case CX23885_BOARD_HAUPPAUGE_HVR1270: |
| case CX23885_BOARD_HAUPPAUGE_HVR1275: |
| case CX23885_BOARD_HAUPPAUGE_HVR1255: |
| case CX23885_BOARD_HAUPPAUGE_HVR1255_22111: |
| case CX23885_BOARD_HAUPPAUGE_HVR1210: |
| case CX23885_BOARD_COMPRO_VIDEOMATE_E800: |
| case CX23885_BOARD_HAUPPAUGE_HVR1290: |
| case CX23885_BOARD_GOTVIEW_X5_3D_HYBRID: |
| default: |
| ts2->gen_ctrl_val = 0xc; /* Serial bus + punctured clock */ |
| ts2->ts_clk_en_val = 0x1; /* Enable TS_CLK */ |
| ts2->src_sel_val = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO; |
| } |
| |
| /* Certain boards support analog, or require the avcore to be |
| * loaded, ensure this happens. |
| */ |
| switch (dev->board) { |
| case CX23885_BOARD_TEVII_S470: |
| /* Currently only enabled for the integrated IR controller */ |
| if (!enable_885_ir) |
| break; |
| case CX23885_BOARD_HAUPPAUGE_HVR1250: |
| case CX23885_BOARD_HAUPPAUGE_HVR1800: |
| case CX23885_BOARD_HAUPPAUGE_HVR1800lp: |
| case CX23885_BOARD_HAUPPAUGE_HVR1700: |
| case CX23885_BOARD_LEADTEK_WINFAST_PXDVR3200_H: |
| case CX23885_BOARD_LEADTEK_WINFAST_PXDVR3200_H_XC4000: |
| case CX23885_BOARD_COMPRO_VIDEOMATE_E650F: |
| case CX23885_BOARD_NETUP_DUAL_DVBS2_CI: |
| case CX23885_BOARD_NETUP_DUAL_DVB_T_C_CI_RF: |
| case CX23885_BOARD_COMPRO_VIDEOMATE_E800: |
| case CX23885_BOARD_HAUPPAUGE_HVR1255: |
| case CX23885_BOARD_HAUPPAUGE_HVR1255_22111: |
| case CX23885_BOARD_HAUPPAUGE_HVR1270: |
| case CX23885_BOARD_HAUPPAUGE_HVR1850: |
| case CX23885_BOARD_MYGICA_X8506: |
| case CX23885_BOARD_MAGICPRO_PROHDTVE2: |
| case CX23885_BOARD_HAUPPAUGE_HVR1290: |
| case CX23885_BOARD_LEADTEK_WINFAST_PXTV1200: |
| case CX23885_BOARD_GOTVIEW_X5_3D_HYBRID: |
| case CX23885_BOARD_HAUPPAUGE_HVR1500: |
| case CX23885_BOARD_MPX885: |
| case CX23885_BOARD_MYGICA_X8507: |
| case CX23885_BOARD_TERRATEC_CINERGY_T_PCIE_DUAL: |
| dev->sd_cx25840 = v4l2_i2c_new_subdev(&dev->v4l2_dev, |
| &dev->i2c_bus[2].i2c_adap, |
| "cx25840", 0x88 >> 1, NULL); |
| if (dev->sd_cx25840) { |
| dev->sd_cx25840->grp_id = CX23885_HW_AV_CORE; |
| v4l2_subdev_call(dev->sd_cx25840, core, load_fw); |
| } |
| break; |
| } |
| |
| /* AUX-PLL 27MHz CLK */ |
| switch (dev->board) { |
| case CX23885_BOARD_NETUP_DUAL_DVBS2_CI: |
| netup_initialize(dev); |
| break; |
| case CX23885_BOARD_NETUP_DUAL_DVB_T_C_CI_RF: { |
| int ret; |
| const struct firmware *fw; |
| const char *filename = "dvb-netup-altera-01.fw"; |
| char *action = "configure"; |
| static struct netup_card_info cinfo; |
| struct altera_config netup_config = { |
| .dev = dev, |
| .action = action, |
| .jtag_io = netup_jtag_io, |
| }; |
| |
| netup_initialize(dev); |
| |
| netup_get_card_info(&dev->i2c_bus[0].i2c_adap, &cinfo); |
| if (netup_card_rev) |
| cinfo.rev = netup_card_rev; |
| |
| switch (cinfo.rev) { |
| case 0x4: |
| filename = "dvb-netup-altera-04.fw"; |
| break; |
| default: |
| filename = "dvb-netup-altera-01.fw"; |
| break; |
| } |
| printk(KERN_INFO "NetUP card rev=0x%x fw_filename=%s\n", |
| cinfo.rev, filename); |
| |
| ret = request_firmware(&fw, filename, &dev->pci->dev); |
| if (ret != 0) |
| printk(KERN_ERR "did not find the firmware file. (%s) " |
| "Please see linux/Documentation/dvb/ for more details " |
| "on firmware-problems.", filename); |
| else |
| altera_init(&netup_config, fw); |
| |
| release_firmware(fw); |
| break; |
| } |
| } |
| } |
| |
| /* ------------------------------------------------------------------ */ |