| /* |
| * linux/arch/m68k/kernel/ptrace.c |
| * |
| * Copyright (C) 1994 by Hamish Macdonald |
| * Taken from linux/kernel/ptrace.c and modified for M680x0. |
| * linux/kernel/ptrace.c is by Ross Biro 1/23/92, edited by Linus Torvalds |
| * |
| * This file is subject to the terms and conditions of the GNU General |
| * Public License. See the file COPYING in the main directory of |
| * this archive for more details. |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/sched.h> |
| #include <linux/mm.h> |
| #include <linux/smp.h> |
| #include <linux/smp_lock.h> |
| #include <linux/errno.h> |
| #include <linux/ptrace.h> |
| #include <linux/user.h> |
| #include <linux/config.h> |
| #include <linux/signal.h> |
| |
| #include <asm/uaccess.h> |
| #include <asm/page.h> |
| #include <asm/pgtable.h> |
| #include <asm/system.h> |
| #include <asm/processor.h> |
| |
| /* |
| * does not yet catch signals sent when the child dies. |
| * in exit.c or in signal.c. |
| */ |
| |
| /* determines which bits in the SR the user has access to. */ |
| /* 1 = access 0 = no access */ |
| #define SR_MASK 0x001f |
| |
| /* sets the trace bits. */ |
| #define TRACE_BITS 0x8000 |
| |
| /* Find the stack offset for a register, relative to thread.esp0. */ |
| #define PT_REG(reg) ((long)&((struct pt_regs *)0)->reg) |
| #define SW_REG(reg) ((long)&((struct switch_stack *)0)->reg \ |
| - sizeof(struct switch_stack)) |
| /* Mapping from PT_xxx to the stack offset at which the register is |
| saved. Notice that usp has no stack-slot and needs to be treated |
| specially (see get_reg/put_reg below). */ |
| static int regoff[] = { |
| [0] = PT_REG(d1), |
| [1] = PT_REG(d2), |
| [2] = PT_REG(d3), |
| [3] = PT_REG(d4), |
| [4] = PT_REG(d5), |
| [5] = SW_REG(d6), |
| [6] = SW_REG(d7), |
| [7] = PT_REG(a0), |
| [8] = PT_REG(a1), |
| [9] = PT_REG(a2), |
| [10] = SW_REG(a3), |
| [11] = SW_REG(a4), |
| [12] = SW_REG(a5), |
| [13] = SW_REG(a6), |
| [14] = PT_REG(d0), |
| [15] = -1, |
| [16] = PT_REG(orig_d0), |
| [17] = PT_REG(sr), |
| [18] = PT_REG(pc), |
| }; |
| |
| /* |
| * Get contents of register REGNO in task TASK. |
| */ |
| static inline long get_reg(struct task_struct *task, int regno) |
| { |
| unsigned long *addr; |
| |
| if (regno == PT_USP) |
| addr = &task->thread.usp; |
| else if (regno < sizeof(regoff)/sizeof(regoff[0])) |
| addr = (unsigned long *)(task->thread.esp0 + regoff[regno]); |
| else |
| return 0; |
| return *addr; |
| } |
| |
| /* |
| * Write contents of register REGNO in task TASK. |
| */ |
| static inline int put_reg(struct task_struct *task, int regno, |
| unsigned long data) |
| { |
| unsigned long *addr; |
| |
| if (regno == PT_USP) |
| addr = &task->thread.usp; |
| else if (regno < sizeof(regoff)/sizeof(regoff[0])) |
| addr = (unsigned long *)(task->thread.esp0 + regoff[regno]); |
| else |
| return -1; |
| *addr = data; |
| return 0; |
| } |
| |
| /* |
| * Make sure the single step bit is not set. |
| */ |
| static inline void singlestep_disable(struct task_struct *child) |
| { |
| unsigned long tmp = get_reg(child, PT_SR) & ~(TRACE_BITS << 16); |
| put_reg(child, PT_SR, tmp); |
| clear_tsk_thread_flag(child, TIF_DELAYED_TRACE); |
| } |
| |
| /* |
| * Called by kernel/ptrace.c when detaching.. |
| */ |
| void ptrace_disable(struct task_struct *child) |
| { |
| singlestep_disable(child); |
| clear_tsk_thread_flag(child, TIF_SYSCALL_TRACE); |
| } |
| |
| long arch_ptrace(struct task_struct *child, long request, long addr, long data) |
| { |
| unsigned long tmp; |
| int i, ret = 0; |
| |
| switch (request) { |
| /* when I and D space are separate, these will need to be fixed. */ |
| case PTRACE_PEEKTEXT: /* read word at location addr. */ |
| case PTRACE_PEEKDATA: |
| i = access_process_vm(child, addr, &tmp, sizeof(tmp), 0); |
| if (i != sizeof(tmp)) |
| goto out_eio; |
| ret = put_user(tmp, (unsigned long *)data); |
| break; |
| |
| /* read the word at location addr in the USER area. */ |
| case PTRACE_PEEKUSR: |
| if (addr & 3) |
| goto out_eio; |
| addr >>= 2; /* temporary hack. */ |
| |
| if (addr >= 0 && addr < 19) { |
| tmp = get_reg(child, addr); |
| if (addr == PT_SR) |
| tmp >>= 16; |
| } else if (addr >= 21 && addr < 49) { |
| tmp = child->thread.fp[addr - 21]; |
| /* Convert internal fpu reg representation |
| * into long double format |
| */ |
| if (FPU_IS_EMU && (addr < 45) && !(addr % 3)) |
| tmp = ((tmp & 0xffff0000) << 15) | |
| ((tmp & 0x0000ffff) << 16); |
| } else |
| break; |
| ret = put_user(tmp, (unsigned long *)data); |
| break; |
| |
| /* when I and D space are separate, this will have to be fixed. */ |
| case PTRACE_POKETEXT: /* write the word at location addr. */ |
| case PTRACE_POKEDATA: |
| if (access_process_vm(child, addr, &data, sizeof(data), 1) != sizeof(data)) |
| goto out_eio; |
| break; |
| |
| case PTRACE_POKEUSR: /* write the word at location addr in the USER area */ |
| if (addr & 3) |
| goto out_eio; |
| addr >>= 2; /* temporary hack. */ |
| |
| if (addr == PT_SR) { |
| data &= SR_MASK; |
| data <<= 16; |
| data |= get_reg(child, PT_SR) & ~(SR_MASK << 16); |
| } else if (addr >= 0 && addr < 19) { |
| if (put_reg(child, addr, data)) |
| goto out_eio; |
| } else if (addr >= 21 && addr < 48) { |
| /* Convert long double format |
| * into internal fpu reg representation |
| */ |
| if (FPU_IS_EMU && (addr < 45) && !(addr % 3)) { |
| data = (unsigned long)data << 15; |
| data = (data & 0xffff0000) | |
| ((data & 0x0000ffff) >> 1); |
| } |
| child->thread.fp[addr - 21] = data; |
| } else |
| goto out_eio; |
| break; |
| |
| case PTRACE_SYSCALL: /* continue and stop at next (return from) syscall */ |
| case PTRACE_CONT: /* restart after signal. */ |
| if (!valid_signal(data)) |
| goto out_eio; |
| |
| if (request == PTRACE_SYSCALL) |
| set_tsk_thread_flag(child, TIF_SYSCALL_TRACE); |
| else |
| clear_tsk_thread_flag(child, TIF_SYSCALL_TRACE); |
| child->exit_code = data; |
| singlestep_disable(child); |
| wake_up_process(child); |
| break; |
| |
| /* |
| * make the child exit. Best I can do is send it a sigkill. |
| * perhaps it should be put in the status that it wants to |
| * exit. |
| */ |
| case PTRACE_KILL: |
| if (child->exit_state == EXIT_ZOMBIE) /* already dead */ |
| break; |
| child->exit_code = SIGKILL; |
| singlestep_disable(child); |
| wake_up_process(child); |
| break; |
| |
| case PTRACE_SINGLESTEP: /* set the trap flag. */ |
| if (!valid_signal(data)) |
| goto out_eio; |
| |
| clear_tsk_thread_flag(child, TIF_SYSCALL_TRACE); |
| tmp = get_reg(child, PT_SR) | (TRACE_BITS << 16); |
| put_reg(child, PT_SR, tmp); |
| set_tsk_thread_flag(child, TIF_DELAYED_TRACE); |
| |
| child->exit_code = data; |
| /* give it a chance to run. */ |
| wake_up_process(child); |
| break; |
| |
| case PTRACE_DETACH: /* detach a process that was attached. */ |
| ret = ptrace_detach(child, data); |
| break; |
| |
| case PTRACE_GETREGS: /* Get all gp regs from the child. */ |
| for (i = 0; i < 19; i++) { |
| tmp = get_reg(child, i); |
| if (i == PT_SR) |
| tmp >>= 16; |
| ret = put_user(tmp, (unsigned long *)data); |
| if (ret) |
| break; |
| data += sizeof(long); |
| } |
| break; |
| |
| case PTRACE_SETREGS: /* Set all gp regs in the child. */ |
| for (i = 0; i < 19; i++) { |
| ret = get_user(tmp, (unsigned long *)data); |
| if (ret) |
| break; |
| if (i == PT_SR) { |
| tmp &= SR_MASK; |
| tmp <<= 16; |
| tmp |= get_reg(child, PT_SR) & ~(SR_MASK << 16); |
| } |
| put_reg(child, i, tmp); |
| data += sizeof(long); |
| } |
| break; |
| |
| case PTRACE_GETFPREGS: /* Get the child FPU state. */ |
| if (copy_to_user((void *)data, &child->thread.fp, |
| sizeof(struct user_m68kfp_struct))) |
| ret = -EFAULT; |
| break; |
| |
| case PTRACE_SETFPREGS: /* Set the child FPU state. */ |
| if (copy_from_user(&child->thread.fp, (void *)data, |
| sizeof(struct user_m68kfp_struct))) |
| ret = -EFAULT; |
| break; |
| |
| default: |
| ret = ptrace_request(child, request, addr, data); |
| break; |
| } |
| |
| return ret; |
| out_eio: |
| return -EIO; |
| } |
| |
| asmlinkage void syscall_trace(void) |
| { |
| ptrace_notify(SIGTRAP | ((current->ptrace & PT_TRACESYSGOOD) |
| ? 0x80 : 0)); |
| /* |
| * this isn't the same as continuing with a signal, but it will do |
| * for normal use. strace only continues with a signal if the |
| * stopping signal is not SIGTRAP. -brl |
| */ |
| if (current->exit_code) { |
| send_sig(current->exit_code, current, 1); |
| current->exit_code = 0; |
| } |
| } |