| /* |
| * wm9081.c -- WM9081 ALSA SoC Audio driver |
| * |
| * Author: Mark Brown |
| * |
| * Copyright 2009 Wolfson Microelectronics plc |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| * |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/moduleparam.h> |
| #include <linux/init.h> |
| #include <linux/delay.h> |
| #include <linux/pm.h> |
| #include <linux/i2c.h> |
| #include <linux/platform_device.h> |
| #include <sound/core.h> |
| #include <sound/pcm.h> |
| #include <sound/pcm_params.h> |
| #include <sound/soc.h> |
| #include <sound/soc-dapm.h> |
| #include <sound/initval.h> |
| #include <sound/tlv.h> |
| |
| #include <sound/wm9081.h> |
| #include "wm9081.h" |
| |
| static u16 wm9081_reg_defaults[] = { |
| 0x0000, /* R0 - Software Reset */ |
| 0x0000, /* R1 */ |
| 0x00B9, /* R2 - Analogue Lineout */ |
| 0x00B9, /* R3 - Analogue Speaker PGA */ |
| 0x0001, /* R4 - VMID Control */ |
| 0x0068, /* R5 - Bias Control 1 */ |
| 0x0000, /* R6 */ |
| 0x0000, /* R7 - Analogue Mixer */ |
| 0x0000, /* R8 - Anti Pop Control */ |
| 0x01DB, /* R9 - Analogue Speaker 1 */ |
| 0x0018, /* R10 - Analogue Speaker 2 */ |
| 0x0180, /* R11 - Power Management */ |
| 0x0000, /* R12 - Clock Control 1 */ |
| 0x0038, /* R13 - Clock Control 2 */ |
| 0x4000, /* R14 - Clock Control 3 */ |
| 0x0000, /* R15 */ |
| 0x0000, /* R16 - FLL Control 1 */ |
| 0x0200, /* R17 - FLL Control 2 */ |
| 0x0000, /* R18 - FLL Control 3 */ |
| 0x0204, /* R19 - FLL Control 4 */ |
| 0x0000, /* R20 - FLL Control 5 */ |
| 0x0000, /* R21 */ |
| 0x0000, /* R22 - Audio Interface 1 */ |
| 0x0002, /* R23 - Audio Interface 2 */ |
| 0x0008, /* R24 - Audio Interface 3 */ |
| 0x0022, /* R25 - Audio Interface 4 */ |
| 0x0000, /* R26 - Interrupt Status */ |
| 0x0006, /* R27 - Interrupt Status Mask */ |
| 0x0000, /* R28 - Interrupt Polarity */ |
| 0x0000, /* R29 - Interrupt Control */ |
| 0x00C0, /* R30 - DAC Digital 1 */ |
| 0x0008, /* R31 - DAC Digital 2 */ |
| 0x09AF, /* R32 - DRC 1 */ |
| 0x4201, /* R33 - DRC 2 */ |
| 0x0000, /* R34 - DRC 3 */ |
| 0x0000, /* R35 - DRC 4 */ |
| 0x0000, /* R36 */ |
| 0x0000, /* R37 */ |
| 0x0000, /* R38 - Write Sequencer 1 */ |
| 0x0000, /* R39 - Write Sequencer 2 */ |
| 0x0002, /* R40 - MW Slave 1 */ |
| 0x0000, /* R41 */ |
| 0x0000, /* R42 - EQ 1 */ |
| 0x0000, /* R43 - EQ 2 */ |
| 0x0FCA, /* R44 - EQ 3 */ |
| 0x0400, /* R45 - EQ 4 */ |
| 0x00B8, /* R46 - EQ 5 */ |
| 0x1EB5, /* R47 - EQ 6 */ |
| 0xF145, /* R48 - EQ 7 */ |
| 0x0B75, /* R49 - EQ 8 */ |
| 0x01C5, /* R50 - EQ 9 */ |
| 0x169E, /* R51 - EQ 10 */ |
| 0xF829, /* R52 - EQ 11 */ |
| 0x07AD, /* R53 - EQ 12 */ |
| 0x1103, /* R54 - EQ 13 */ |
| 0x1C58, /* R55 - EQ 14 */ |
| 0xF373, /* R56 - EQ 15 */ |
| 0x0A54, /* R57 - EQ 16 */ |
| 0x0558, /* R58 - EQ 17 */ |
| 0x0564, /* R59 - EQ 18 */ |
| 0x0559, /* R60 - EQ 19 */ |
| 0x4000, /* R61 - EQ 20 */ |
| }; |
| |
| static struct { |
| int ratio; |
| int clk_sys_rate; |
| } clk_sys_rates[] = { |
| { 64, 0 }, |
| { 128, 1 }, |
| { 192, 2 }, |
| { 256, 3 }, |
| { 384, 4 }, |
| { 512, 5 }, |
| { 768, 6 }, |
| { 1024, 7 }, |
| { 1408, 8 }, |
| { 1536, 9 }, |
| }; |
| |
| static struct { |
| int rate; |
| int sample_rate; |
| } sample_rates[] = { |
| { 8000, 0 }, |
| { 11025, 1 }, |
| { 12000, 2 }, |
| { 16000, 3 }, |
| { 22050, 4 }, |
| { 24000, 5 }, |
| { 32000, 6 }, |
| { 44100, 7 }, |
| { 48000, 8 }, |
| { 88200, 9 }, |
| { 96000, 10 }, |
| }; |
| |
| static struct { |
| int div; /* *10 due to .5s */ |
| int bclk_div; |
| } bclk_divs[] = { |
| { 10, 0 }, |
| { 15, 1 }, |
| { 20, 2 }, |
| { 30, 3 }, |
| { 40, 4 }, |
| { 50, 5 }, |
| { 55, 6 }, |
| { 60, 7 }, |
| { 80, 8 }, |
| { 100, 9 }, |
| { 110, 10 }, |
| { 120, 11 }, |
| { 160, 12 }, |
| { 200, 13 }, |
| { 220, 14 }, |
| { 240, 15 }, |
| { 250, 16 }, |
| { 300, 17 }, |
| { 320, 18 }, |
| { 440, 19 }, |
| { 480, 20 }, |
| }; |
| |
| struct wm9081_priv { |
| struct snd_soc_codec codec; |
| u16 reg_cache[WM9081_MAX_REGISTER + 1]; |
| int sysclk_source; |
| int mclk_rate; |
| int sysclk_rate; |
| int fs; |
| int bclk; |
| int master; |
| int fll_fref; |
| int fll_fout; |
| struct wm9081_retune_mobile_config *retune; |
| }; |
| |
| static int wm9081_reg_is_volatile(int reg) |
| { |
| switch (reg) { |
| default: |
| return 0; |
| } |
| } |
| |
| static unsigned int wm9081_read_reg_cache(struct snd_soc_codec *codec, |
| unsigned int reg) |
| { |
| u16 *cache = codec->reg_cache; |
| BUG_ON(reg > WM9081_MAX_REGISTER); |
| return cache[reg]; |
| } |
| |
| static unsigned int wm9081_read_hw(struct snd_soc_codec *codec, u8 reg) |
| { |
| struct i2c_msg xfer[2]; |
| u16 data; |
| int ret; |
| struct i2c_client *client = codec->control_data; |
| |
| BUG_ON(reg > WM9081_MAX_REGISTER); |
| |
| /* Write register */ |
| xfer[0].addr = client->addr; |
| xfer[0].flags = 0; |
| xfer[0].len = 1; |
| xfer[0].buf = ® |
| |
| /* Read data */ |
| xfer[1].addr = client->addr; |
| xfer[1].flags = I2C_M_RD; |
| xfer[1].len = 2; |
| xfer[1].buf = (u8 *)&data; |
| |
| ret = i2c_transfer(client->adapter, xfer, 2); |
| if (ret != 2) { |
| dev_err(&client->dev, "i2c_transfer() returned %d\n", ret); |
| return 0; |
| } |
| |
| return (data >> 8) | ((data & 0xff) << 8); |
| } |
| |
| static unsigned int wm9081_read(struct snd_soc_codec *codec, unsigned int reg) |
| { |
| if (wm9081_reg_is_volatile(reg)) |
| return wm9081_read_hw(codec, reg); |
| else |
| return wm9081_read_reg_cache(codec, reg); |
| } |
| |
| static int wm9081_write(struct snd_soc_codec *codec, unsigned int reg, |
| unsigned int value) |
| { |
| u16 *cache = codec->reg_cache; |
| u8 data[3]; |
| |
| BUG_ON(reg > WM9081_MAX_REGISTER); |
| |
| if (!wm9081_reg_is_volatile(reg)) |
| cache[reg] = value; |
| |
| data[0] = reg; |
| data[1] = value >> 8; |
| data[2] = value & 0x00ff; |
| |
| if (codec->hw_write(codec->control_data, data, 3) == 3) |
| return 0; |
| else |
| return -EIO; |
| } |
| |
| static int wm9081_reset(struct snd_soc_codec *codec) |
| { |
| return wm9081_write(codec, WM9081_SOFTWARE_RESET, 0); |
| } |
| |
| static const DECLARE_TLV_DB_SCALE(drc_in_tlv, -4500, 75, 0); |
| static const DECLARE_TLV_DB_SCALE(drc_out_tlv, -2250, 75, 0); |
| static const DECLARE_TLV_DB_SCALE(drc_min_tlv, -1800, 600, 0); |
| static unsigned int drc_max_tlv[] = { |
| TLV_DB_RANGE_HEAD(4), |
| 0, 0, TLV_DB_SCALE_ITEM(1200, 0, 0), |
| 1, 1, TLV_DB_SCALE_ITEM(1800, 0, 0), |
| 2, 2, TLV_DB_SCALE_ITEM(2400, 0, 0), |
| 3, 3, TLV_DB_SCALE_ITEM(3600, 0, 0), |
| }; |
| static const DECLARE_TLV_DB_SCALE(drc_qr_tlv, 1200, 600, 0); |
| static const DECLARE_TLV_DB_SCALE(drc_startup_tlv, -300, 50, 0); |
| |
| static const DECLARE_TLV_DB_SCALE(eq_tlv, -1200, 100, 0); |
| |
| static const DECLARE_TLV_DB_SCALE(in_tlv, -600, 600, 0); |
| static const DECLARE_TLV_DB_SCALE(dac_tlv, -7200, 75, 1); |
| static const DECLARE_TLV_DB_SCALE(out_tlv, -5700, 100, 0); |
| |
| static const char *drc_high_text[] = { |
| "1", |
| "1/2", |
| "1/4", |
| "1/8", |
| "1/16", |
| "0", |
| }; |
| |
| static const struct soc_enum drc_high = |
| SOC_ENUM_SINGLE(WM9081_DRC_3, 3, 6, drc_high_text); |
| |
| static const char *drc_low_text[] = { |
| "1", |
| "1/2", |
| "1/4", |
| "1/8", |
| "0", |
| }; |
| |
| static const struct soc_enum drc_low = |
| SOC_ENUM_SINGLE(WM9081_DRC_3, 0, 5, drc_low_text); |
| |
| static const char *drc_atk_text[] = { |
| "181us", |
| "181us", |
| "363us", |
| "726us", |
| "1.45ms", |
| "2.9ms", |
| "5.8ms", |
| "11.6ms", |
| "23.2ms", |
| "46.4ms", |
| "92.8ms", |
| "185.6ms", |
| }; |
| |
| static const struct soc_enum drc_atk = |
| SOC_ENUM_SINGLE(WM9081_DRC_2, 12, 12, drc_atk_text); |
| |
| static const char *drc_dcy_text[] = { |
| "186ms", |
| "372ms", |
| "743ms", |
| "1.49s", |
| "2.97s", |
| "5.94s", |
| "11.89s", |
| "23.78s", |
| "47.56s", |
| }; |
| |
| static const struct soc_enum drc_dcy = |
| SOC_ENUM_SINGLE(WM9081_DRC_2, 8, 9, drc_dcy_text); |
| |
| static const char *drc_qr_dcy_text[] = { |
| "0.725ms", |
| "1.45ms", |
| "5.8ms", |
| }; |
| |
| static const struct soc_enum drc_qr_dcy = |
| SOC_ENUM_SINGLE(WM9081_DRC_2, 4, 3, drc_qr_dcy_text); |
| |
| static const char *dac_deemph_text[] = { |
| "None", |
| "32kHz", |
| "44.1kHz", |
| "48kHz", |
| }; |
| |
| static const struct soc_enum dac_deemph = |
| SOC_ENUM_SINGLE(WM9081_DAC_DIGITAL_2, 1, 4, dac_deemph_text); |
| |
| static const char *speaker_mode_text[] = { |
| "Class D", |
| "Class AB", |
| }; |
| |
| static const struct soc_enum speaker_mode = |
| SOC_ENUM_SINGLE(WM9081_ANALOGUE_SPEAKER_2, 6, 2, speaker_mode_text); |
| |
| static int speaker_mode_get(struct snd_kcontrol *kcontrol, |
| struct snd_ctl_elem_value *ucontrol) |
| { |
| struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol); |
| unsigned int reg; |
| |
| reg = wm9081_read(codec, WM9081_ANALOGUE_SPEAKER_2); |
| if (reg & WM9081_SPK_MODE) |
| ucontrol->value.integer.value[0] = 1; |
| else |
| ucontrol->value.integer.value[0] = 0; |
| |
| return 0; |
| } |
| |
| /* |
| * Stop any attempts to change speaker mode while the speaker is enabled. |
| * |
| * We also have some special anti-pop controls dependant on speaker |
| * mode which must be changed along with the mode. |
| */ |
| static int speaker_mode_put(struct snd_kcontrol *kcontrol, |
| struct snd_ctl_elem_value *ucontrol) |
| { |
| struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol); |
| unsigned int reg_pwr = wm9081_read(codec, WM9081_POWER_MANAGEMENT); |
| unsigned int reg2 = wm9081_read(codec, WM9081_ANALOGUE_SPEAKER_2); |
| |
| /* Are we changing anything? */ |
| if (ucontrol->value.integer.value[0] == |
| ((reg2 & WM9081_SPK_MODE) != 0)) |
| return 0; |
| |
| /* Don't try to change modes while enabled */ |
| if (reg_pwr & WM9081_SPK_ENA) |
| return -EINVAL; |
| |
| if (ucontrol->value.integer.value[0]) { |
| /* Class AB */ |
| reg2 &= ~(WM9081_SPK_INV_MUTE | WM9081_OUT_SPK_CTRL); |
| reg2 |= WM9081_SPK_MODE; |
| } else { |
| /* Class D */ |
| reg2 |= WM9081_SPK_INV_MUTE | WM9081_OUT_SPK_CTRL; |
| reg2 &= ~WM9081_SPK_MODE; |
| } |
| |
| wm9081_write(codec, WM9081_ANALOGUE_SPEAKER_2, reg2); |
| |
| return 0; |
| } |
| |
| static const struct snd_kcontrol_new wm9081_snd_controls[] = { |
| SOC_SINGLE_TLV("IN1 Volume", WM9081_ANALOGUE_MIXER, 1, 1, 1, in_tlv), |
| SOC_SINGLE_TLV("IN2 Volume", WM9081_ANALOGUE_MIXER, 3, 1, 1, in_tlv), |
| |
| SOC_SINGLE_TLV("Playback Volume", WM9081_DAC_DIGITAL_1, 1, 96, 0, dac_tlv), |
| |
| SOC_SINGLE("LINEOUT Switch", WM9081_ANALOGUE_LINEOUT, 7, 1, 1), |
| SOC_SINGLE("LINEOUT ZC Switch", WM9081_ANALOGUE_LINEOUT, 6, 1, 0), |
| SOC_SINGLE_TLV("LINEOUT Volume", WM9081_ANALOGUE_LINEOUT, 0, 63, 0, out_tlv), |
| |
| SOC_SINGLE("DRC Switch", WM9081_DRC_1, 15, 1, 0), |
| SOC_ENUM("DRC High Slope", drc_high), |
| SOC_ENUM("DRC Low Slope", drc_low), |
| SOC_SINGLE_TLV("DRC Input Volume", WM9081_DRC_4, 5, 60, 1, drc_in_tlv), |
| SOC_SINGLE_TLV("DRC Output Volume", WM9081_DRC_4, 0, 30, 1, drc_out_tlv), |
| SOC_SINGLE_TLV("DRC Minimum Volume", WM9081_DRC_2, 2, 3, 1, drc_min_tlv), |
| SOC_SINGLE_TLV("DRC Maximum Volume", WM9081_DRC_2, 0, 3, 0, drc_max_tlv), |
| SOC_ENUM("DRC Attack", drc_atk), |
| SOC_ENUM("DRC Decay", drc_dcy), |
| SOC_SINGLE("DRC Quick Release Switch", WM9081_DRC_1, 2, 1, 0), |
| SOC_SINGLE_TLV("DRC Quick Release Volume", WM9081_DRC_2, 6, 3, 0, drc_qr_tlv), |
| SOC_ENUM("DRC Quick Release Decay", drc_qr_dcy), |
| SOC_SINGLE_TLV("DRC Startup Volume", WM9081_DRC_1, 6, 18, 0, drc_startup_tlv), |
| |
| SOC_SINGLE("EQ Switch", WM9081_EQ_1, 0, 1, 0), |
| |
| SOC_SINGLE("Speaker DC Volume", WM9081_ANALOGUE_SPEAKER_1, 3, 5, 0), |
| SOC_SINGLE("Speaker AC Volume", WM9081_ANALOGUE_SPEAKER_1, 0, 5, 0), |
| SOC_SINGLE("Speaker Switch", WM9081_ANALOGUE_SPEAKER_PGA, 7, 1, 1), |
| SOC_SINGLE("Speaker ZC Switch", WM9081_ANALOGUE_SPEAKER_PGA, 6, 1, 0), |
| SOC_SINGLE_TLV("Speaker Volume", WM9081_ANALOGUE_SPEAKER_PGA, 0, 63, 0, |
| out_tlv), |
| SOC_ENUM("DAC Deemphasis", dac_deemph), |
| SOC_ENUM_EXT("Speaker Mode", speaker_mode, speaker_mode_get, speaker_mode_put), |
| }; |
| |
| static const struct snd_kcontrol_new wm9081_eq_controls[] = { |
| SOC_SINGLE_TLV("EQ1 Volume", WM9081_EQ_1, 11, 24, 0, eq_tlv), |
| SOC_SINGLE_TLV("EQ2 Volume", WM9081_EQ_1, 6, 24, 0, eq_tlv), |
| SOC_SINGLE_TLV("EQ3 Volume", WM9081_EQ_1, 1, 24, 0, eq_tlv), |
| SOC_SINGLE_TLV("EQ4 Volume", WM9081_EQ_2, 11, 24, 0, eq_tlv), |
| SOC_SINGLE_TLV("EQ5 Volume", WM9081_EQ_2, 6, 24, 0, eq_tlv), |
| }; |
| |
| static const struct snd_kcontrol_new mixer[] = { |
| SOC_DAPM_SINGLE("IN1 Switch", WM9081_ANALOGUE_MIXER, 0, 1, 0), |
| SOC_DAPM_SINGLE("IN2 Switch", WM9081_ANALOGUE_MIXER, 2, 1, 0), |
| SOC_DAPM_SINGLE("Playback Switch", WM9081_ANALOGUE_MIXER, 4, 1, 0), |
| }; |
| |
| static int speaker_event(struct snd_soc_dapm_widget *w, |
| struct snd_kcontrol *kcontrol, int event) |
| { |
| struct snd_soc_codec *codec = w->codec; |
| unsigned int reg = wm9081_read(codec, WM9081_POWER_MANAGEMENT); |
| |
| switch (event) { |
| case SND_SOC_DAPM_POST_PMU: |
| reg |= WM9081_SPK_ENA; |
| break; |
| |
| case SND_SOC_DAPM_PRE_PMD: |
| reg &= ~WM9081_SPK_ENA; |
| break; |
| } |
| |
| wm9081_write(codec, WM9081_POWER_MANAGEMENT, reg); |
| |
| return 0; |
| } |
| |
| struct _fll_div { |
| u16 fll_fratio; |
| u16 fll_outdiv; |
| u16 fll_clk_ref_div; |
| u16 n; |
| u16 k; |
| }; |
| |
| /* The size in bits of the FLL divide multiplied by 10 |
| * to allow rounding later */ |
| #define FIXED_FLL_SIZE ((1 << 16) * 10) |
| |
| static struct { |
| unsigned int min; |
| unsigned int max; |
| u16 fll_fratio; |
| int ratio; |
| } fll_fratios[] = { |
| { 0, 64000, 4, 16 }, |
| { 64000, 128000, 3, 8 }, |
| { 128000, 256000, 2, 4 }, |
| { 256000, 1000000, 1, 2 }, |
| { 1000000, 13500000, 0, 1 }, |
| }; |
| |
| static int fll_factors(struct _fll_div *fll_div, unsigned int Fref, |
| unsigned int Fout) |
| { |
| u64 Kpart; |
| unsigned int K, Ndiv, Nmod, target; |
| unsigned int div; |
| int i; |
| |
| /* Fref must be <=13.5MHz */ |
| div = 1; |
| while ((Fref / div) > 13500000) { |
| div *= 2; |
| |
| if (div > 8) { |
| pr_err("Can't scale %dMHz input down to <=13.5MHz\n", |
| Fref); |
| return -EINVAL; |
| } |
| } |
| fll_div->fll_clk_ref_div = div / 2; |
| |
| pr_debug("Fref=%u Fout=%u\n", Fref, Fout); |
| |
| /* Apply the division for our remaining calculations */ |
| Fref /= div; |
| |
| /* Fvco should be 90-100MHz; don't check the upper bound */ |
| div = 0; |
| target = Fout * 2; |
| while (target < 90000000) { |
| div++; |
| target *= 2; |
| if (div > 7) { |
| pr_err("Unable to find FLL_OUTDIV for Fout=%uHz\n", |
| Fout); |
| return -EINVAL; |
| } |
| } |
| fll_div->fll_outdiv = div; |
| |
| pr_debug("Fvco=%dHz\n", target); |
| |
| /* Find an appropraite FLL_FRATIO and factor it out of the target */ |
| for (i = 0; i < ARRAY_SIZE(fll_fratios); i++) { |
| if (fll_fratios[i].min <= Fref && Fref <= fll_fratios[i].max) { |
| fll_div->fll_fratio = fll_fratios[i].fll_fratio; |
| target /= fll_fratios[i].ratio; |
| break; |
| } |
| } |
| if (i == ARRAY_SIZE(fll_fratios)) { |
| pr_err("Unable to find FLL_FRATIO for Fref=%uHz\n", Fref); |
| return -EINVAL; |
| } |
| |
| /* Now, calculate N.K */ |
| Ndiv = target / Fref; |
| |
| fll_div->n = Ndiv; |
| Nmod = target % Fref; |
| pr_debug("Nmod=%d\n", Nmod); |
| |
| /* Calculate fractional part - scale up so we can round. */ |
| Kpart = FIXED_FLL_SIZE * (long long)Nmod; |
| |
| do_div(Kpart, Fref); |
| |
| K = Kpart & 0xFFFFFFFF; |
| |
| if ((K % 10) >= 5) |
| K += 5; |
| |
| /* Move down to proper range now rounding is done */ |
| fll_div->k = K / 10; |
| |
| pr_debug("N=%x K=%x FLL_FRATIO=%x FLL_OUTDIV=%x FLL_CLK_REF_DIV=%x\n", |
| fll_div->n, fll_div->k, |
| fll_div->fll_fratio, fll_div->fll_outdiv, |
| fll_div->fll_clk_ref_div); |
| |
| return 0; |
| } |
| |
| static int wm9081_set_fll(struct snd_soc_codec *codec, int fll_id, |
| unsigned int Fref, unsigned int Fout) |
| { |
| struct wm9081_priv *wm9081 = codec->private_data; |
| u16 reg1, reg4, reg5; |
| struct _fll_div fll_div; |
| int ret; |
| int clk_sys_reg; |
| |
| /* Any change? */ |
| if (Fref == wm9081->fll_fref && Fout == wm9081->fll_fout) |
| return 0; |
| |
| /* Disable the FLL */ |
| if (Fout == 0) { |
| dev_dbg(codec->dev, "FLL disabled\n"); |
| wm9081->fll_fref = 0; |
| wm9081->fll_fout = 0; |
| |
| return 0; |
| } |
| |
| ret = fll_factors(&fll_div, Fref, Fout); |
| if (ret != 0) |
| return ret; |
| |
| reg5 = wm9081_read(codec, WM9081_FLL_CONTROL_5); |
| reg5 &= ~WM9081_FLL_CLK_SRC_MASK; |
| |
| switch (fll_id) { |
| case WM9081_SYSCLK_FLL_MCLK: |
| reg5 |= 0x1; |
| break; |
| |
| default: |
| dev_err(codec->dev, "Unknown FLL ID %d\n", fll_id); |
| return -EINVAL; |
| } |
| |
| /* Disable CLK_SYS while we reconfigure */ |
| clk_sys_reg = wm9081_read(codec, WM9081_CLOCK_CONTROL_3); |
| if (clk_sys_reg & WM9081_CLK_SYS_ENA) |
| wm9081_write(codec, WM9081_CLOCK_CONTROL_3, |
| clk_sys_reg & ~WM9081_CLK_SYS_ENA); |
| |
| /* Any FLL configuration change requires that the FLL be |
| * disabled first. */ |
| reg1 = wm9081_read(codec, WM9081_FLL_CONTROL_1); |
| reg1 &= ~WM9081_FLL_ENA; |
| wm9081_write(codec, WM9081_FLL_CONTROL_1, reg1); |
| |
| /* Apply the configuration */ |
| if (fll_div.k) |
| reg1 |= WM9081_FLL_FRAC_MASK; |
| else |
| reg1 &= ~WM9081_FLL_FRAC_MASK; |
| wm9081_write(codec, WM9081_FLL_CONTROL_1, reg1); |
| |
| wm9081_write(codec, WM9081_FLL_CONTROL_2, |
| (fll_div.fll_outdiv << WM9081_FLL_OUTDIV_SHIFT) | |
| (fll_div.fll_fratio << WM9081_FLL_FRATIO_SHIFT)); |
| wm9081_write(codec, WM9081_FLL_CONTROL_3, fll_div.k); |
| |
| reg4 = wm9081_read(codec, WM9081_FLL_CONTROL_4); |
| reg4 &= ~WM9081_FLL_N_MASK; |
| reg4 |= fll_div.n << WM9081_FLL_N_SHIFT; |
| wm9081_write(codec, WM9081_FLL_CONTROL_4, reg4); |
| |
| reg5 &= ~WM9081_FLL_CLK_REF_DIV_MASK; |
| reg5 |= fll_div.fll_clk_ref_div << WM9081_FLL_CLK_REF_DIV_SHIFT; |
| wm9081_write(codec, WM9081_FLL_CONTROL_5, reg5); |
| |
| /* Enable the FLL */ |
| wm9081_write(codec, WM9081_FLL_CONTROL_1, reg1 | WM9081_FLL_ENA); |
| |
| /* Then bring CLK_SYS up again if it was disabled */ |
| if (clk_sys_reg & WM9081_CLK_SYS_ENA) |
| wm9081_write(codec, WM9081_CLOCK_CONTROL_3, clk_sys_reg); |
| |
| dev_dbg(codec->dev, "FLL enabled at %dHz->%dHz\n", Fref, Fout); |
| |
| wm9081->fll_fref = Fref; |
| wm9081->fll_fout = Fout; |
| |
| return 0; |
| } |
| |
| static int configure_clock(struct snd_soc_codec *codec) |
| { |
| struct wm9081_priv *wm9081 = codec->private_data; |
| int new_sysclk, i, target; |
| unsigned int reg; |
| int ret = 0; |
| int mclkdiv = 0; |
| int fll = 0; |
| |
| switch (wm9081->sysclk_source) { |
| case WM9081_SYSCLK_MCLK: |
| if (wm9081->mclk_rate > 12225000) { |
| mclkdiv = 1; |
| wm9081->sysclk_rate = wm9081->mclk_rate / 2; |
| } else { |
| wm9081->sysclk_rate = wm9081->mclk_rate; |
| } |
| wm9081_set_fll(codec, WM9081_SYSCLK_FLL_MCLK, 0, 0); |
| break; |
| |
| case WM9081_SYSCLK_FLL_MCLK: |
| /* If we have a sample rate calculate a CLK_SYS that |
| * gives us a suitable DAC configuration, plus BCLK. |
| * Ideally we would check to see if we can clock |
| * directly from MCLK and only use the FLL if this is |
| * not the case, though care must be taken with free |
| * running mode. |
| */ |
| if (wm9081->master && wm9081->bclk) { |
| /* Make sure we can generate CLK_SYS and BCLK |
| * and that we've got 3MHz for optimal |
| * performance. */ |
| for (i = 0; i < ARRAY_SIZE(clk_sys_rates); i++) { |
| target = wm9081->fs * clk_sys_rates[i].ratio; |
| new_sysclk = target; |
| if (target >= wm9081->bclk && |
| target > 3000000) |
| break; |
| } |
| } else if (wm9081->fs) { |
| for (i = 0; i < ARRAY_SIZE(clk_sys_rates); i++) { |
| new_sysclk = clk_sys_rates[i].ratio |
| * wm9081->fs; |
| if (new_sysclk > 3000000) |
| break; |
| } |
| } else { |
| new_sysclk = 12288000; |
| } |
| |
| ret = wm9081_set_fll(codec, WM9081_SYSCLK_FLL_MCLK, |
| wm9081->mclk_rate, new_sysclk); |
| if (ret == 0) { |
| wm9081->sysclk_rate = new_sysclk; |
| |
| /* Switch SYSCLK over to FLL */ |
| fll = 1; |
| } else { |
| wm9081->sysclk_rate = wm9081->mclk_rate; |
| } |
| break; |
| |
| default: |
| return -EINVAL; |
| } |
| |
| reg = wm9081_read(codec, WM9081_CLOCK_CONTROL_1); |
| if (mclkdiv) |
| reg |= WM9081_MCLKDIV2; |
| else |
| reg &= ~WM9081_MCLKDIV2; |
| wm9081_write(codec, WM9081_CLOCK_CONTROL_1, reg); |
| |
| reg = wm9081_read(codec, WM9081_CLOCK_CONTROL_3); |
| if (fll) |
| reg |= WM9081_CLK_SRC_SEL; |
| else |
| reg &= ~WM9081_CLK_SRC_SEL; |
| wm9081_write(codec, WM9081_CLOCK_CONTROL_3, reg); |
| |
| dev_dbg(codec->dev, "CLK_SYS is %dHz\n", wm9081->sysclk_rate); |
| |
| return ret; |
| } |
| |
| static int clk_sys_event(struct snd_soc_dapm_widget *w, |
| struct snd_kcontrol *kcontrol, int event) |
| { |
| struct snd_soc_codec *codec = w->codec; |
| struct wm9081_priv *wm9081 = codec->private_data; |
| |
| /* This should be done on init() for bypass paths */ |
| switch (wm9081->sysclk_source) { |
| case WM9081_SYSCLK_MCLK: |
| dev_dbg(codec->dev, "Using %dHz MCLK\n", wm9081->mclk_rate); |
| break; |
| case WM9081_SYSCLK_FLL_MCLK: |
| dev_dbg(codec->dev, "Using %dHz MCLK with FLL\n", |
| wm9081->mclk_rate); |
| break; |
| default: |
| dev_err(codec->dev, "System clock not configured\n"); |
| return -EINVAL; |
| } |
| |
| switch (event) { |
| case SND_SOC_DAPM_PRE_PMU: |
| configure_clock(codec); |
| break; |
| |
| case SND_SOC_DAPM_POST_PMD: |
| /* Disable the FLL if it's running */ |
| wm9081_set_fll(codec, 0, 0, 0); |
| break; |
| } |
| |
| return 0; |
| } |
| |
| static const struct snd_soc_dapm_widget wm9081_dapm_widgets[] = { |
| SND_SOC_DAPM_INPUT("IN1"), |
| SND_SOC_DAPM_INPUT("IN2"), |
| |
| SND_SOC_DAPM_DAC("DAC", "HiFi Playback", WM9081_POWER_MANAGEMENT, 0, 0), |
| |
| SND_SOC_DAPM_MIXER_NAMED_CTL("Mixer", SND_SOC_NOPM, 0, 0, |
| mixer, ARRAY_SIZE(mixer)), |
| |
| SND_SOC_DAPM_PGA("LINEOUT PGA", WM9081_POWER_MANAGEMENT, 4, 0, NULL, 0), |
| |
| SND_SOC_DAPM_PGA_E("Speaker PGA", WM9081_POWER_MANAGEMENT, 2, 0, NULL, 0, |
| speaker_event, |
| SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_PRE_PMD), |
| |
| SND_SOC_DAPM_OUTPUT("LINEOUT"), |
| SND_SOC_DAPM_OUTPUT("SPKN"), |
| SND_SOC_DAPM_OUTPUT("SPKP"), |
| |
| SND_SOC_DAPM_SUPPLY("CLK_SYS", WM9081_CLOCK_CONTROL_3, 0, 0, clk_sys_event, |
| SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMD), |
| SND_SOC_DAPM_SUPPLY("CLK_DSP", WM9081_CLOCK_CONTROL_3, 1, 0, NULL, 0), |
| SND_SOC_DAPM_SUPPLY("TOCLK", WM9081_CLOCK_CONTROL_3, 2, 0, NULL, 0), |
| }; |
| |
| |
| static const struct snd_soc_dapm_route audio_paths[] = { |
| { "DAC", NULL, "CLK_SYS" }, |
| { "DAC", NULL, "CLK_DSP" }, |
| |
| { "Mixer", "IN1 Switch", "IN1" }, |
| { "Mixer", "IN2 Switch", "IN2" }, |
| { "Mixer", "Playback Switch", "DAC" }, |
| |
| { "LINEOUT PGA", NULL, "Mixer" }, |
| { "LINEOUT PGA", NULL, "TOCLK" }, |
| { "LINEOUT PGA", NULL, "CLK_SYS" }, |
| |
| { "LINEOUT", NULL, "LINEOUT PGA" }, |
| |
| { "Speaker PGA", NULL, "Mixer" }, |
| { "Speaker PGA", NULL, "TOCLK" }, |
| { "Speaker PGA", NULL, "CLK_SYS" }, |
| |
| { "SPKN", NULL, "Speaker PGA" }, |
| { "SPKP", NULL, "Speaker PGA" }, |
| }; |
| |
| static int wm9081_set_bias_level(struct snd_soc_codec *codec, |
| enum snd_soc_bias_level level) |
| { |
| u16 reg; |
| |
| switch (level) { |
| case SND_SOC_BIAS_ON: |
| break; |
| |
| case SND_SOC_BIAS_PREPARE: |
| /* VMID=2*40k */ |
| reg = wm9081_read(codec, WM9081_VMID_CONTROL); |
| reg &= ~WM9081_VMID_SEL_MASK; |
| reg |= 0x2; |
| wm9081_write(codec, WM9081_VMID_CONTROL, reg); |
| |
| /* Normal bias current */ |
| reg = wm9081_read(codec, WM9081_BIAS_CONTROL_1); |
| reg &= ~WM9081_STBY_BIAS_ENA; |
| wm9081_write(codec, WM9081_BIAS_CONTROL_1, reg); |
| break; |
| |
| case SND_SOC_BIAS_STANDBY: |
| /* Initial cold start */ |
| if (codec->bias_level == SND_SOC_BIAS_OFF) { |
| /* Disable LINEOUT discharge */ |
| reg = wm9081_read(codec, WM9081_ANTI_POP_CONTROL); |
| reg &= ~WM9081_LINEOUT_DISCH; |
| wm9081_write(codec, WM9081_ANTI_POP_CONTROL, reg); |
| |
| /* Select startup bias source */ |
| reg = wm9081_read(codec, WM9081_BIAS_CONTROL_1); |
| reg |= WM9081_BIAS_SRC | WM9081_BIAS_ENA; |
| wm9081_write(codec, WM9081_BIAS_CONTROL_1, reg); |
| |
| /* VMID 2*4k; Soft VMID ramp enable */ |
| reg = wm9081_read(codec, WM9081_VMID_CONTROL); |
| reg |= WM9081_VMID_RAMP | 0x6; |
| wm9081_write(codec, WM9081_VMID_CONTROL, reg); |
| |
| mdelay(100); |
| |
| /* Normal bias enable & soft start off */ |
| reg |= WM9081_BIAS_ENA; |
| reg &= ~WM9081_VMID_RAMP; |
| wm9081_write(codec, WM9081_VMID_CONTROL, reg); |
| |
| /* Standard bias source */ |
| reg = wm9081_read(codec, WM9081_BIAS_CONTROL_1); |
| reg &= ~WM9081_BIAS_SRC; |
| wm9081_write(codec, WM9081_BIAS_CONTROL_1, reg); |
| } |
| |
| /* VMID 2*240k */ |
| reg = wm9081_read(codec, WM9081_BIAS_CONTROL_1); |
| reg &= ~WM9081_VMID_SEL_MASK; |
| reg |= 0x40; |
| wm9081_write(codec, WM9081_VMID_CONTROL, reg); |
| |
| /* Standby bias current on */ |
| reg = wm9081_read(codec, WM9081_BIAS_CONTROL_1); |
| reg |= WM9081_STBY_BIAS_ENA; |
| wm9081_write(codec, WM9081_BIAS_CONTROL_1, reg); |
| break; |
| |
| case SND_SOC_BIAS_OFF: |
| /* Startup bias source */ |
| reg = wm9081_read(codec, WM9081_BIAS_CONTROL_1); |
| reg |= WM9081_BIAS_SRC; |
| wm9081_write(codec, WM9081_BIAS_CONTROL_1, reg); |
| |
| /* Disable VMID and biases with soft ramping */ |
| reg = wm9081_read(codec, WM9081_VMID_CONTROL); |
| reg &= ~(WM9081_VMID_SEL_MASK | WM9081_BIAS_ENA); |
| reg |= WM9081_VMID_RAMP; |
| wm9081_write(codec, WM9081_VMID_CONTROL, reg); |
| |
| /* Actively discharge LINEOUT */ |
| reg = wm9081_read(codec, WM9081_ANTI_POP_CONTROL); |
| reg |= WM9081_LINEOUT_DISCH; |
| wm9081_write(codec, WM9081_ANTI_POP_CONTROL, reg); |
| break; |
| } |
| |
| codec->bias_level = level; |
| |
| return 0; |
| } |
| |
| static int wm9081_set_dai_fmt(struct snd_soc_dai *dai, |
| unsigned int fmt) |
| { |
| struct snd_soc_codec *codec = dai->codec; |
| struct wm9081_priv *wm9081 = codec->private_data; |
| unsigned int aif2 = wm9081_read(codec, WM9081_AUDIO_INTERFACE_2); |
| |
| aif2 &= ~(WM9081_AIF_BCLK_INV | WM9081_AIF_LRCLK_INV | |
| WM9081_BCLK_DIR | WM9081_LRCLK_DIR | WM9081_AIF_FMT_MASK); |
| |
| switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) { |
| case SND_SOC_DAIFMT_CBS_CFS: |
| wm9081->master = 0; |
| break; |
| case SND_SOC_DAIFMT_CBS_CFM: |
| aif2 |= WM9081_LRCLK_DIR; |
| wm9081->master = 1; |
| break; |
| case SND_SOC_DAIFMT_CBM_CFS: |
| aif2 |= WM9081_BCLK_DIR; |
| wm9081->master = 1; |
| break; |
| case SND_SOC_DAIFMT_CBM_CFM: |
| aif2 |= WM9081_LRCLK_DIR | WM9081_BCLK_DIR; |
| wm9081->master = 1; |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) { |
| case SND_SOC_DAIFMT_DSP_B: |
| aif2 |= WM9081_AIF_LRCLK_INV; |
| case SND_SOC_DAIFMT_DSP_A: |
| aif2 |= 0x3; |
| break; |
| case SND_SOC_DAIFMT_I2S: |
| aif2 |= 0x2; |
| break; |
| case SND_SOC_DAIFMT_RIGHT_J: |
| break; |
| case SND_SOC_DAIFMT_LEFT_J: |
| aif2 |= 0x1; |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) { |
| case SND_SOC_DAIFMT_DSP_A: |
| case SND_SOC_DAIFMT_DSP_B: |
| /* frame inversion not valid for DSP modes */ |
| switch (fmt & SND_SOC_DAIFMT_INV_MASK) { |
| case SND_SOC_DAIFMT_NB_NF: |
| break; |
| case SND_SOC_DAIFMT_IB_NF: |
| aif2 |= WM9081_AIF_BCLK_INV; |
| break; |
| default: |
| return -EINVAL; |
| } |
| break; |
| |
| case SND_SOC_DAIFMT_I2S: |
| case SND_SOC_DAIFMT_RIGHT_J: |
| case SND_SOC_DAIFMT_LEFT_J: |
| switch (fmt & SND_SOC_DAIFMT_INV_MASK) { |
| case SND_SOC_DAIFMT_NB_NF: |
| break; |
| case SND_SOC_DAIFMT_IB_IF: |
| aif2 |= WM9081_AIF_BCLK_INV | WM9081_AIF_LRCLK_INV; |
| break; |
| case SND_SOC_DAIFMT_IB_NF: |
| aif2 |= WM9081_AIF_BCLK_INV; |
| break; |
| case SND_SOC_DAIFMT_NB_IF: |
| aif2 |= WM9081_AIF_LRCLK_INV; |
| break; |
| default: |
| return -EINVAL; |
| } |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| wm9081_write(codec, WM9081_AUDIO_INTERFACE_2, aif2); |
| |
| return 0; |
| } |
| |
| static int wm9081_hw_params(struct snd_pcm_substream *substream, |
| struct snd_pcm_hw_params *params, |
| struct snd_soc_dai *dai) |
| { |
| struct snd_soc_codec *codec = dai->codec; |
| struct wm9081_priv *wm9081 = codec->private_data; |
| int ret, i, best, best_val, cur_val; |
| unsigned int clk_ctrl2, aif1, aif2, aif3, aif4; |
| |
| clk_ctrl2 = wm9081_read(codec, WM9081_CLOCK_CONTROL_2); |
| clk_ctrl2 &= ~(WM9081_CLK_SYS_RATE_MASK | WM9081_SAMPLE_RATE_MASK); |
| |
| aif1 = wm9081_read(codec, WM9081_AUDIO_INTERFACE_1); |
| |
| aif2 = wm9081_read(codec, WM9081_AUDIO_INTERFACE_2); |
| aif2 &= ~WM9081_AIF_WL_MASK; |
| |
| aif3 = wm9081_read(codec, WM9081_AUDIO_INTERFACE_3); |
| aif3 &= ~WM9081_BCLK_DIV_MASK; |
| |
| aif4 = wm9081_read(codec, WM9081_AUDIO_INTERFACE_4); |
| aif4 &= ~WM9081_LRCLK_RATE_MASK; |
| |
| /* What BCLK do we need? */ |
| wm9081->fs = params_rate(params); |
| wm9081->bclk = 2 * wm9081->fs; |
| switch (params_format(params)) { |
| case SNDRV_PCM_FORMAT_S16_LE: |
| wm9081->bclk *= 16; |
| break; |
| case SNDRV_PCM_FORMAT_S20_3LE: |
| wm9081->bclk *= 20; |
| aif2 |= 0x4; |
| break; |
| case SNDRV_PCM_FORMAT_S24_LE: |
| wm9081->bclk *= 24; |
| aif2 |= 0x8; |
| break; |
| case SNDRV_PCM_FORMAT_S32_LE: |
| wm9081->bclk *= 32; |
| aif2 |= 0xc; |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| if (aif1 & WM9081_AIFDAC_TDM_MODE_MASK) { |
| int slots = ((aif1 & WM9081_AIFDAC_TDM_MODE_MASK) >> |
| WM9081_AIFDAC_TDM_MODE_SHIFT) + 1; |
| wm9081->bclk *= slots; |
| } |
| |
| dev_dbg(codec->dev, "Target BCLK is %dHz\n", wm9081->bclk); |
| |
| ret = configure_clock(codec); |
| if (ret != 0) |
| return ret; |
| |
| /* Select nearest CLK_SYS_RATE */ |
| best = 0; |
| best_val = abs((wm9081->sysclk_rate / clk_sys_rates[0].ratio) |
| - wm9081->fs); |
| for (i = 1; i < ARRAY_SIZE(clk_sys_rates); i++) { |
| cur_val = abs((wm9081->sysclk_rate / |
| clk_sys_rates[i].ratio) - wm9081->fs);; |
| if (cur_val < best_val) { |
| best = i; |
| best_val = cur_val; |
| } |
| } |
| dev_dbg(codec->dev, "Selected CLK_SYS_RATIO of %d\n", |
| clk_sys_rates[best].ratio); |
| clk_ctrl2 |= (clk_sys_rates[best].clk_sys_rate |
| << WM9081_CLK_SYS_RATE_SHIFT); |
| |
| /* SAMPLE_RATE */ |
| best = 0; |
| best_val = abs(wm9081->fs - sample_rates[0].rate); |
| for (i = 1; i < ARRAY_SIZE(sample_rates); i++) { |
| /* Closest match */ |
| cur_val = abs(wm9081->fs - sample_rates[i].rate); |
| if (cur_val < best_val) { |
| best = i; |
| best_val = cur_val; |
| } |
| } |
| dev_dbg(codec->dev, "Selected SAMPLE_RATE of %dHz\n", |
| sample_rates[best].rate); |
| clk_ctrl2 |= (sample_rates[best].sample_rate |
| << WM9081_SAMPLE_RATE_SHIFT); |
| |
| /* BCLK_DIV */ |
| best = 0; |
| best_val = INT_MAX; |
| for (i = 0; i < ARRAY_SIZE(bclk_divs); i++) { |
| cur_val = ((wm9081->sysclk_rate * 10) / bclk_divs[i].div) |
| - wm9081->bclk; |
| if (cur_val < 0) /* Table is sorted */ |
| break; |
| if (cur_val < best_val) { |
| best = i; |
| best_val = cur_val; |
| } |
| } |
| wm9081->bclk = (wm9081->sysclk_rate * 10) / bclk_divs[best].div; |
| dev_dbg(codec->dev, "Selected BCLK_DIV of %d for %dHz BCLK\n", |
| bclk_divs[best].div, wm9081->bclk); |
| aif3 |= bclk_divs[best].bclk_div; |
| |
| /* LRCLK is a simple fraction of BCLK */ |
| dev_dbg(codec->dev, "LRCLK_RATE is %d\n", wm9081->bclk / wm9081->fs); |
| aif4 |= wm9081->bclk / wm9081->fs; |
| |
| /* Apply a ReTune Mobile configuration if it's in use */ |
| if (wm9081->retune) { |
| struct wm9081_retune_mobile_config *retune = wm9081->retune; |
| struct wm9081_retune_mobile_setting *s; |
| int eq1; |
| |
| best = 0; |
| best_val = abs(retune->configs[0].rate - wm9081->fs); |
| for (i = 0; i < retune->num_configs; i++) { |
| cur_val = abs(retune->configs[i].rate - wm9081->fs); |
| if (cur_val < best_val) { |
| best_val = cur_val; |
| best = i; |
| } |
| } |
| s = &retune->configs[best]; |
| |
| dev_dbg(codec->dev, "ReTune Mobile %s tuned for %dHz\n", |
| s->name, s->rate); |
| |
| /* If the EQ is enabled then disable it while we write out */ |
| eq1 = wm9081_read(codec, WM9081_EQ_1) & WM9081_EQ_ENA; |
| if (eq1 & WM9081_EQ_ENA) |
| wm9081_write(codec, WM9081_EQ_1, 0); |
| |
| /* Write out the other values */ |
| for (i = 1; i < ARRAY_SIZE(s->config); i++) |
| wm9081_write(codec, WM9081_EQ_1 + i, s->config[i]); |
| |
| eq1 |= (s->config[0] & ~WM9081_EQ_ENA); |
| wm9081_write(codec, WM9081_EQ_1, eq1); |
| } |
| |
| wm9081_write(codec, WM9081_CLOCK_CONTROL_2, clk_ctrl2); |
| wm9081_write(codec, WM9081_AUDIO_INTERFACE_2, aif2); |
| wm9081_write(codec, WM9081_AUDIO_INTERFACE_3, aif3); |
| wm9081_write(codec, WM9081_AUDIO_INTERFACE_4, aif4); |
| |
| return 0; |
| } |
| |
| static int wm9081_digital_mute(struct snd_soc_dai *codec_dai, int mute) |
| { |
| struct snd_soc_codec *codec = codec_dai->codec; |
| unsigned int reg; |
| |
| reg = wm9081_read(codec, WM9081_DAC_DIGITAL_2); |
| |
| if (mute) |
| reg |= WM9081_DAC_MUTE; |
| else |
| reg &= ~WM9081_DAC_MUTE; |
| |
| wm9081_write(codec, WM9081_DAC_DIGITAL_2, reg); |
| |
| return 0; |
| } |
| |
| static int wm9081_set_sysclk(struct snd_soc_dai *codec_dai, |
| int clk_id, unsigned int freq, int dir) |
| { |
| struct snd_soc_codec *codec = codec_dai->codec; |
| struct wm9081_priv *wm9081 = codec->private_data; |
| |
| switch (clk_id) { |
| case WM9081_SYSCLK_MCLK: |
| case WM9081_SYSCLK_FLL_MCLK: |
| wm9081->sysclk_source = clk_id; |
| wm9081->mclk_rate = freq; |
| break; |
| |
| default: |
| return -EINVAL; |
| } |
| |
| return 0; |
| } |
| |
| static int wm9081_set_tdm_slot(struct snd_soc_dai *dai, |
| unsigned int mask, int slots) |
| { |
| struct snd_soc_codec *codec = dai->codec; |
| unsigned int aif1 = wm9081_read(codec, WM9081_AUDIO_INTERFACE_1); |
| |
| aif1 &= ~(WM9081_AIFDAC_TDM_SLOT_MASK | WM9081_AIFDAC_TDM_MODE_MASK); |
| |
| if (slots < 1 || slots > 4) |
| return -EINVAL; |
| |
| aif1 |= (slots - 1) << WM9081_AIFDAC_TDM_MODE_SHIFT; |
| |
| switch (mask) { |
| case 1: |
| break; |
| case 2: |
| aif1 |= 0x10; |
| break; |
| case 4: |
| aif1 |= 0x20; |
| break; |
| case 8: |
| aif1 |= 0x30; |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| wm9081_write(codec, WM9081_AUDIO_INTERFACE_1, aif1); |
| |
| return 0; |
| } |
| |
| #define WM9081_RATES SNDRV_PCM_RATE_8000_96000 |
| |
| #define WM9081_FORMATS \ |
| (SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S20_3LE | \ |
| SNDRV_PCM_FMTBIT_S24_LE | SNDRV_PCM_FMTBIT_S32_LE) |
| |
| static struct snd_soc_dai_ops wm9081_dai_ops = { |
| .hw_params = wm9081_hw_params, |
| .set_sysclk = wm9081_set_sysclk, |
| .set_fmt = wm9081_set_dai_fmt, |
| .digital_mute = wm9081_digital_mute, |
| .set_tdm_slot = wm9081_set_tdm_slot, |
| }; |
| |
| /* We report two channels because the CODEC processes a stereo signal, even |
| * though it is only capable of handling a mono output. |
| */ |
| struct snd_soc_dai wm9081_dai = { |
| .name = "WM9081", |
| .playback = { |
| .stream_name = "HiFi Playback", |
| .channels_min = 1, |
| .channels_max = 2, |
| .rates = WM9081_RATES, |
| .formats = WM9081_FORMATS, |
| }, |
| .ops = &wm9081_dai_ops, |
| }; |
| EXPORT_SYMBOL_GPL(wm9081_dai); |
| |
| |
| static struct snd_soc_codec *wm9081_codec; |
| |
| static int wm9081_probe(struct platform_device *pdev) |
| { |
| struct snd_soc_device *socdev = platform_get_drvdata(pdev); |
| struct snd_soc_codec *codec; |
| struct wm9081_priv *wm9081; |
| int ret = 0; |
| |
| if (wm9081_codec == NULL) { |
| dev_err(&pdev->dev, "Codec device not registered\n"); |
| return -ENODEV; |
| } |
| |
| socdev->card->codec = wm9081_codec; |
| codec = wm9081_codec; |
| wm9081 = codec->private_data; |
| |
| /* register pcms */ |
| ret = snd_soc_new_pcms(socdev, SNDRV_DEFAULT_IDX1, SNDRV_DEFAULT_STR1); |
| if (ret < 0) { |
| dev_err(codec->dev, "failed to create pcms: %d\n", ret); |
| goto pcm_err; |
| } |
| |
| snd_soc_add_controls(codec, wm9081_snd_controls, |
| ARRAY_SIZE(wm9081_snd_controls)); |
| if (!wm9081->retune) { |
| dev_dbg(codec->dev, |
| "No ReTune Mobile data, using normal EQ\n"); |
| snd_soc_add_controls(codec, wm9081_eq_controls, |
| ARRAY_SIZE(wm9081_eq_controls)); |
| } |
| |
| snd_soc_dapm_new_controls(codec, wm9081_dapm_widgets, |
| ARRAY_SIZE(wm9081_dapm_widgets)); |
| snd_soc_dapm_add_routes(codec, audio_paths, ARRAY_SIZE(audio_paths)); |
| snd_soc_dapm_new_widgets(codec); |
| |
| ret = snd_soc_init_card(socdev); |
| if (ret < 0) { |
| dev_err(codec->dev, "failed to register card: %d\n", ret); |
| goto card_err; |
| } |
| |
| return ret; |
| |
| card_err: |
| snd_soc_free_pcms(socdev); |
| snd_soc_dapm_free(socdev); |
| pcm_err: |
| return ret; |
| } |
| |
| static int wm9081_remove(struct platform_device *pdev) |
| { |
| struct snd_soc_device *socdev = platform_get_drvdata(pdev); |
| |
| snd_soc_free_pcms(socdev); |
| snd_soc_dapm_free(socdev); |
| |
| return 0; |
| } |
| |
| #ifdef CONFIG_PM |
| static int wm9081_suspend(struct platform_device *pdev, pm_message_t state) |
| { |
| struct snd_soc_device *socdev = platform_get_drvdata(pdev); |
| struct snd_soc_codec *codec = socdev->card->codec; |
| |
| wm9081_set_bias_level(codec, SND_SOC_BIAS_OFF); |
| |
| return 0; |
| } |
| |
| static int wm9081_resume(struct platform_device *pdev) |
| { |
| struct snd_soc_device *socdev = platform_get_drvdata(pdev); |
| struct snd_soc_codec *codec = socdev->card->codec; |
| u16 *reg_cache = codec->reg_cache; |
| int i; |
| |
| for (i = 0; i < codec->reg_cache_size; i++) { |
| if (i == WM9081_SOFTWARE_RESET) |
| continue; |
| |
| wm9081_write(codec, i, reg_cache[i]); |
| } |
| |
| wm9081_set_bias_level(codec, SND_SOC_BIAS_STANDBY); |
| |
| return 0; |
| } |
| #else |
| #define wm9081_suspend NULL |
| #define wm9081_resume NULL |
| #endif |
| |
| struct snd_soc_codec_device soc_codec_dev_wm9081 = { |
| .probe = wm9081_probe, |
| .remove = wm9081_remove, |
| .suspend = wm9081_suspend, |
| .resume = wm9081_resume, |
| }; |
| EXPORT_SYMBOL_GPL(soc_codec_dev_wm9081); |
| |
| static int wm9081_register(struct wm9081_priv *wm9081) |
| { |
| struct snd_soc_codec *codec = &wm9081->codec; |
| int ret; |
| u16 reg; |
| |
| if (wm9081_codec) { |
| dev_err(codec->dev, "Another WM9081 is registered\n"); |
| ret = -EINVAL; |
| goto err; |
| } |
| |
| mutex_init(&codec->mutex); |
| INIT_LIST_HEAD(&codec->dapm_widgets); |
| INIT_LIST_HEAD(&codec->dapm_paths); |
| |
| codec->private_data = wm9081; |
| codec->name = "WM9081"; |
| codec->owner = THIS_MODULE; |
| codec->read = wm9081_read; |
| codec->write = wm9081_write; |
| codec->dai = &wm9081_dai; |
| codec->num_dai = 1; |
| codec->reg_cache_size = ARRAY_SIZE(wm9081->reg_cache); |
| codec->reg_cache = &wm9081->reg_cache; |
| codec->bias_level = SND_SOC_BIAS_OFF; |
| codec->set_bias_level = wm9081_set_bias_level; |
| |
| memcpy(codec->reg_cache, wm9081_reg_defaults, |
| sizeof(wm9081_reg_defaults)); |
| |
| reg = wm9081_read_hw(codec, WM9081_SOFTWARE_RESET); |
| if (reg != 0x9081) { |
| dev_err(codec->dev, "Device is not a WM9081: ID=0x%x\n", reg); |
| ret = -EINVAL; |
| goto err; |
| } |
| |
| ret = wm9081_reset(codec); |
| if (ret < 0) { |
| dev_err(codec->dev, "Failed to issue reset\n"); |
| return ret; |
| } |
| |
| wm9081_set_bias_level(codec, SND_SOC_BIAS_STANDBY); |
| |
| /* Enable zero cross by default */ |
| reg = wm9081_read(codec, WM9081_ANALOGUE_LINEOUT); |
| wm9081_write(codec, WM9081_ANALOGUE_LINEOUT, reg | WM9081_LINEOUTZC); |
| reg = wm9081_read(codec, WM9081_ANALOGUE_SPEAKER_PGA); |
| wm9081_write(codec, WM9081_ANALOGUE_SPEAKER_PGA, |
| reg | WM9081_SPKPGAZC); |
| |
| wm9081_dai.dev = codec->dev; |
| |
| wm9081_codec = codec; |
| |
| ret = snd_soc_register_codec(codec); |
| if (ret != 0) { |
| dev_err(codec->dev, "Failed to register codec: %d\n", ret); |
| return ret; |
| } |
| |
| ret = snd_soc_register_dai(&wm9081_dai); |
| if (ret != 0) { |
| dev_err(codec->dev, "Failed to register DAI: %d\n", ret); |
| snd_soc_unregister_codec(codec); |
| return ret; |
| } |
| |
| return 0; |
| |
| err: |
| kfree(wm9081); |
| return ret; |
| } |
| |
| static void wm9081_unregister(struct wm9081_priv *wm9081) |
| { |
| wm9081_set_bias_level(&wm9081->codec, SND_SOC_BIAS_OFF); |
| snd_soc_unregister_dai(&wm9081_dai); |
| snd_soc_unregister_codec(&wm9081->codec); |
| kfree(wm9081); |
| wm9081_codec = NULL; |
| } |
| |
| static __devinit int wm9081_i2c_probe(struct i2c_client *i2c, |
| const struct i2c_device_id *id) |
| { |
| struct wm9081_priv *wm9081; |
| struct snd_soc_codec *codec; |
| |
| wm9081 = kzalloc(sizeof(struct wm9081_priv), GFP_KERNEL); |
| if (wm9081 == NULL) |
| return -ENOMEM; |
| |
| codec = &wm9081->codec; |
| codec->hw_write = (hw_write_t)i2c_master_send; |
| wm9081->retune = i2c->dev.platform_data; |
| |
| i2c_set_clientdata(i2c, wm9081); |
| codec->control_data = i2c; |
| |
| codec->dev = &i2c->dev; |
| |
| return wm9081_register(wm9081); |
| } |
| |
| static __devexit int wm9081_i2c_remove(struct i2c_client *client) |
| { |
| struct wm9081_priv *wm9081 = i2c_get_clientdata(client); |
| wm9081_unregister(wm9081); |
| return 0; |
| } |
| |
| #ifdef CONFIG_PM |
| static int wm9081_i2c_suspend(struct i2c_client *client, pm_message_t msg) |
| { |
| return snd_soc_suspend_device(&client->dev); |
| } |
| |
| static int wm9081_i2c_resume(struct i2c_client *client) |
| { |
| return snd_soc_resume_device(&client->dev); |
| } |
| #else |
| #define wm9081_i2c_suspend NULL |
| #define wm9081_i2c_resume NULL |
| #endif |
| |
| static const struct i2c_device_id wm9081_i2c_id[] = { |
| { "wm9081", 0 }, |
| { } |
| }; |
| MODULE_DEVICE_TABLE(i2c, wm9081_i2c_id); |
| |
| static struct i2c_driver wm9081_i2c_driver = { |
| .driver = { |
| .name = "wm9081", |
| .owner = THIS_MODULE, |
| }, |
| .probe = wm9081_i2c_probe, |
| .remove = __devexit_p(wm9081_i2c_remove), |
| .suspend = wm9081_i2c_suspend, |
| .resume = wm9081_i2c_resume, |
| .id_table = wm9081_i2c_id, |
| }; |
| |
| static int __init wm9081_modinit(void) |
| { |
| int ret; |
| |
| ret = i2c_add_driver(&wm9081_i2c_driver); |
| if (ret != 0) { |
| printk(KERN_ERR "Failed to register WM9081 I2C driver: %d\n", |
| ret); |
| } |
| |
| return ret; |
| } |
| module_init(wm9081_modinit); |
| |
| static void __exit wm9081_exit(void) |
| { |
| i2c_del_driver(&wm9081_i2c_driver); |
| } |
| module_exit(wm9081_exit); |
| |
| |
| MODULE_DESCRIPTION("ASoC WM9081 driver"); |
| MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>"); |
| MODULE_LICENSE("GPL"); |