| /* |
| * wm8940.c -- WM8940 ALSA Soc Audio driver |
| * |
| * Author: Jonathan Cameron <jic23@cam.ac.uk> |
| * |
| * Based on wm8510.c |
| * Copyright 2006 Wolfson Microelectronics PLC. |
| * Author: Liam Girdwood <lrg@slimlogic.co.uk> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| * |
| * Not currently handled: |
| * Notch filter control |
| * AUXMode (inverting vs mixer) |
| * No means to obtain current gain if alc enabled. |
| * No use made of gpio |
| * Fast VMID discharge for power down |
| * Soft Start |
| * DLR and ALR Swaps not enabled |
| * Digital Sidetone not supported |
| */ |
| #include <linux/module.h> |
| #include <linux/moduleparam.h> |
| #include <linux/kernel.h> |
| #include <linux/init.h> |
| #include <linux/delay.h> |
| #include <linux/pm.h> |
| #include <linux/i2c.h> |
| #include <linux/platform_device.h> |
| #include <linux/spi/spi.h> |
| #include <sound/core.h> |
| #include <sound/pcm.h> |
| #include <sound/pcm_params.h> |
| #include <sound/soc.h> |
| #include <sound/soc-dapm.h> |
| #include <sound/initval.h> |
| #include <sound/tlv.h> |
| |
| #include "wm8940.h" |
| |
| struct wm8940_priv { |
| unsigned int sysclk; |
| u16 reg_cache[WM8940_CACHEREGNUM]; |
| struct snd_soc_codec codec; |
| }; |
| |
| static u16 wm8940_reg_defaults[] = { |
| 0x8940, /* Soft Reset */ |
| 0x0000, /* Power 1 */ |
| 0x0000, /* Power 2 */ |
| 0x0000, /* Power 3 */ |
| 0x0010, /* Interface Control */ |
| 0x0000, /* Companding Control */ |
| 0x0140, /* Clock Control */ |
| 0x0000, /* Additional Controls */ |
| 0x0000, /* GPIO Control */ |
| 0x0002, /* Auto Increment Control */ |
| 0x0000, /* DAC Control */ |
| 0x00FF, /* DAC Volume */ |
| 0, |
| 0, |
| 0x0100, /* ADC Control */ |
| 0x00FF, /* ADC Volume */ |
| 0x0000, /* Notch Filter 1 Control 1 */ |
| 0x0000, /* Notch Filter 1 Control 2 */ |
| 0x0000, /* Notch Filter 2 Control 1 */ |
| 0x0000, /* Notch Filter 2 Control 2 */ |
| 0x0000, /* Notch Filter 3 Control 1 */ |
| 0x0000, /* Notch Filter 3 Control 2 */ |
| 0x0000, /* Notch Filter 4 Control 1 */ |
| 0x0000, /* Notch Filter 4 Control 2 */ |
| 0x0032, /* DAC Limit Control 1 */ |
| 0x0000, /* DAC Limit Control 2 */ |
| 0, |
| 0, |
| 0, |
| 0, |
| 0, |
| 0, |
| 0x0038, /* ALC Control 1 */ |
| 0x000B, /* ALC Control 2 */ |
| 0x0032, /* ALC Control 3 */ |
| 0x0000, /* Noise Gate */ |
| 0x0041, /* PLLN */ |
| 0x000C, /* PLLK1 */ |
| 0x0093, /* PLLK2 */ |
| 0x00E9, /* PLLK3 */ |
| 0, |
| 0, |
| 0x0030, /* ALC Control 4 */ |
| 0, |
| 0x0002, /* Input Control */ |
| 0x0050, /* PGA Gain */ |
| 0, |
| 0x0002, /* ADC Boost Control */ |
| 0, |
| 0x0002, /* Output Control */ |
| 0x0000, /* Speaker Mixer Control */ |
| 0, |
| 0, |
| 0, |
| 0x0079, /* Speaker Volume */ |
| 0, |
| 0x0000, /* Mono Mixer Control */ |
| }; |
| |
| static const char *wm8940_companding[] = { "Off", "NC", "u-law", "A-law" }; |
| static const struct soc_enum wm8940_adc_companding_enum |
| = SOC_ENUM_SINGLE(WM8940_COMPANDINGCTL, 1, 4, wm8940_companding); |
| static const struct soc_enum wm8940_dac_companding_enum |
| = SOC_ENUM_SINGLE(WM8940_COMPANDINGCTL, 3, 4, wm8940_companding); |
| |
| static const char *wm8940_alc_mode_text[] = {"ALC", "Limiter"}; |
| static const struct soc_enum wm8940_alc_mode_enum |
| = SOC_ENUM_SINGLE(WM8940_ALC3, 8, 2, wm8940_alc_mode_text); |
| |
| static const char *wm8940_mic_bias_level_text[] = {"0.9", "0.65"}; |
| static const struct soc_enum wm8940_mic_bias_level_enum |
| = SOC_ENUM_SINGLE(WM8940_INPUTCTL, 8, 2, wm8940_mic_bias_level_text); |
| |
| static const char *wm8940_filter_mode_text[] = {"Audio", "Application"}; |
| static const struct soc_enum wm8940_filter_mode_enum |
| = SOC_ENUM_SINGLE(WM8940_ADC, 7, 2, wm8940_filter_mode_text); |
| |
| static DECLARE_TLV_DB_SCALE(wm8940_spk_vol_tlv, -5700, 100, 1); |
| static DECLARE_TLV_DB_SCALE(wm8940_att_tlv, -1000, 1000, 0); |
| static DECLARE_TLV_DB_SCALE(wm8940_pga_vol_tlv, -1200, 75, 0); |
| static DECLARE_TLV_DB_SCALE(wm8940_alc_min_tlv, -1200, 600, 0); |
| static DECLARE_TLV_DB_SCALE(wm8940_alc_max_tlv, 675, 600, 0); |
| static DECLARE_TLV_DB_SCALE(wm8940_alc_tar_tlv, -2250, 50, 0); |
| static DECLARE_TLV_DB_SCALE(wm8940_lim_boost_tlv, 0, 100, 0); |
| static DECLARE_TLV_DB_SCALE(wm8940_lim_thresh_tlv, -600, 100, 0); |
| static DECLARE_TLV_DB_SCALE(wm8940_adc_tlv, -12750, 50, 1); |
| static DECLARE_TLV_DB_SCALE(wm8940_capture_boost_vol_tlv, 0, 2000, 0); |
| |
| static const struct snd_kcontrol_new wm8940_snd_controls[] = { |
| SOC_SINGLE("Digital Loopback Switch", WM8940_COMPANDINGCTL, |
| 6, 1, 0), |
| SOC_ENUM("DAC Companding", wm8940_dac_companding_enum), |
| SOC_ENUM("ADC Companding", wm8940_adc_companding_enum), |
| |
| SOC_ENUM("ALC Mode", wm8940_alc_mode_enum), |
| SOC_SINGLE("ALC Switch", WM8940_ALC1, 8, 1, 0), |
| SOC_SINGLE_TLV("ALC Capture Max Gain", WM8940_ALC1, |
| 3, 7, 1, wm8940_alc_max_tlv), |
| SOC_SINGLE_TLV("ALC Capture Min Gain", WM8940_ALC1, |
| 0, 7, 0, wm8940_alc_min_tlv), |
| SOC_SINGLE_TLV("ALC Capture Target", WM8940_ALC2, |
| 0, 14, 0, wm8940_alc_tar_tlv), |
| SOC_SINGLE("ALC Capture Hold", WM8940_ALC2, 4, 10, 0), |
| SOC_SINGLE("ALC Capture Decay", WM8940_ALC3, 4, 10, 0), |
| SOC_SINGLE("ALC Capture Attach", WM8940_ALC3, 0, 10, 0), |
| SOC_SINGLE("ALC ZC Switch", WM8940_ALC4, 1, 1, 0), |
| SOC_SINGLE("ALC Capture Noise Gate Switch", WM8940_NOISEGATE, |
| 3, 1, 0), |
| SOC_SINGLE("ALC Capture Noise Gate Threshold", WM8940_NOISEGATE, |
| 0, 7, 0), |
| |
| SOC_SINGLE("DAC Playback Limiter Switch", WM8940_DACLIM1, 8, 1, 0), |
| SOC_SINGLE("DAC Playback Limiter Attack", WM8940_DACLIM1, 0, 9, 0), |
| SOC_SINGLE("DAC Playback Limiter Decay", WM8940_DACLIM1, 4, 11, 0), |
| SOC_SINGLE_TLV("DAC Playback Limiter Threshold", WM8940_DACLIM2, |
| 4, 9, 1, wm8940_lim_thresh_tlv), |
| SOC_SINGLE_TLV("DAC Playback Limiter Boost", WM8940_DACLIM2, |
| 0, 12, 0, wm8940_lim_boost_tlv), |
| |
| SOC_SINGLE("Capture PGA ZC Switch", WM8940_PGAGAIN, 7, 1, 0), |
| SOC_SINGLE_TLV("Capture PGA Volume", WM8940_PGAGAIN, |
| 0, 63, 0, wm8940_pga_vol_tlv), |
| SOC_SINGLE_TLV("Digital Playback Volume", WM8940_DACVOL, |
| 0, 255, 0, wm8940_adc_tlv), |
| SOC_SINGLE_TLV("Digital Capture Volume", WM8940_ADCVOL, |
| 0, 255, 0, wm8940_adc_tlv), |
| SOC_ENUM("Mic Bias Level", wm8940_mic_bias_level_enum), |
| SOC_SINGLE_TLV("Capture Boost Volue", WM8940_ADCBOOST, |
| 8, 1, 0, wm8940_capture_boost_vol_tlv), |
| SOC_SINGLE_TLV("Speaker Playback Volume", WM8940_SPKVOL, |
| 0, 63, 0, wm8940_spk_vol_tlv), |
| SOC_SINGLE("Speaker Playback Switch", WM8940_SPKVOL, 6, 1, 1), |
| |
| SOC_SINGLE_TLV("Speaker Mixer Line Bypass Volume", WM8940_SPKVOL, |
| 8, 1, 1, wm8940_att_tlv), |
| SOC_SINGLE("Speaker Playback ZC Switch", WM8940_SPKVOL, 7, 1, 0), |
| |
| SOC_SINGLE("Mono Out Switch", WM8940_MONOMIX, 6, 1, 1), |
| SOC_SINGLE_TLV("Mono Mixer Line Bypass Volume", WM8940_MONOMIX, |
| 7, 1, 1, wm8940_att_tlv), |
| |
| SOC_SINGLE("High Pass Filter Switch", WM8940_ADC, 8, 1, 0), |
| SOC_ENUM("High Pass Filter Mode", wm8940_filter_mode_enum), |
| SOC_SINGLE("High Pass Filter Cut Off", WM8940_ADC, 4, 7, 0), |
| SOC_SINGLE("ADC Inversion Switch", WM8940_ADC, 0, 1, 0), |
| SOC_SINGLE("DAC Inversion Switch", WM8940_DAC, 0, 1, 0), |
| SOC_SINGLE("DAC Auto Mute Switch", WM8940_DAC, 2, 1, 0), |
| SOC_SINGLE("ZC Timeout Clock Switch", WM8940_ADDCNTRL, 0, 1, 0), |
| }; |
| |
| static const struct snd_kcontrol_new wm8940_speaker_mixer_controls[] = { |
| SOC_DAPM_SINGLE("Line Bypass Switch", WM8940_SPKMIX, 1, 1, 0), |
| SOC_DAPM_SINGLE("Aux Playback Switch", WM8940_SPKMIX, 5, 1, 0), |
| SOC_DAPM_SINGLE("PCM Playback Switch", WM8940_SPKMIX, 0, 1, 0), |
| }; |
| |
| static const struct snd_kcontrol_new wm8940_mono_mixer_controls[] = { |
| SOC_DAPM_SINGLE("Line Bypass Switch", WM8940_MONOMIX, 1, 1, 0), |
| SOC_DAPM_SINGLE("Aux Playback Switch", WM8940_MONOMIX, 2, 1, 0), |
| SOC_DAPM_SINGLE("PCM Playback Switch", WM8940_MONOMIX, 0, 1, 0), |
| }; |
| |
| static DECLARE_TLV_DB_SCALE(wm8940_boost_vol_tlv, -1500, 300, 1); |
| static const struct snd_kcontrol_new wm8940_input_boost_controls[] = { |
| SOC_DAPM_SINGLE("Mic PGA Switch", WM8940_PGAGAIN, 6, 1, 1), |
| SOC_DAPM_SINGLE_TLV("Aux Volume", WM8940_ADCBOOST, |
| 0, 7, 0, wm8940_boost_vol_tlv), |
| SOC_DAPM_SINGLE_TLV("Mic Volume", WM8940_ADCBOOST, |
| 4, 7, 0, wm8940_boost_vol_tlv), |
| }; |
| |
| static const struct snd_kcontrol_new wm8940_micpga_controls[] = { |
| SOC_DAPM_SINGLE("AUX Switch", WM8940_INPUTCTL, 2, 1, 0), |
| SOC_DAPM_SINGLE("MICP Switch", WM8940_INPUTCTL, 0, 1, 0), |
| SOC_DAPM_SINGLE("MICN Switch", WM8940_INPUTCTL, 1, 1, 0), |
| }; |
| |
| static const struct snd_soc_dapm_widget wm8940_dapm_widgets[] = { |
| SND_SOC_DAPM_MIXER("Speaker Mixer", WM8940_POWER3, 2, 0, |
| &wm8940_speaker_mixer_controls[0], |
| ARRAY_SIZE(wm8940_speaker_mixer_controls)), |
| SND_SOC_DAPM_MIXER("Mono Mixer", WM8940_POWER3, 3, 0, |
| &wm8940_mono_mixer_controls[0], |
| ARRAY_SIZE(wm8940_mono_mixer_controls)), |
| SND_SOC_DAPM_DAC("DAC", "HiFi Playback", WM8940_POWER3, 0, 0), |
| |
| SND_SOC_DAPM_PGA("SpkN Out", WM8940_POWER3, 5, 0, NULL, 0), |
| SND_SOC_DAPM_PGA("SpkP Out", WM8940_POWER3, 6, 0, NULL, 0), |
| SND_SOC_DAPM_PGA("Mono Out", WM8940_POWER3, 7, 0, NULL, 0), |
| SND_SOC_DAPM_OUTPUT("MONOOUT"), |
| SND_SOC_DAPM_OUTPUT("SPKOUTP"), |
| SND_SOC_DAPM_OUTPUT("SPKOUTN"), |
| |
| SND_SOC_DAPM_PGA("Aux Input", WM8940_POWER1, 6, 0, NULL, 0), |
| SND_SOC_DAPM_ADC("ADC", "HiFi Capture", WM8940_POWER2, 0, 0), |
| SND_SOC_DAPM_MIXER("Mic PGA", WM8940_POWER2, 2, 0, |
| &wm8940_micpga_controls[0], |
| ARRAY_SIZE(wm8940_micpga_controls)), |
| SND_SOC_DAPM_MIXER("Boost Mixer", WM8940_POWER2, 4, 0, |
| &wm8940_input_boost_controls[0], |
| ARRAY_SIZE(wm8940_input_boost_controls)), |
| SND_SOC_DAPM_MICBIAS("Mic Bias", WM8940_POWER1, 4, 0), |
| |
| SND_SOC_DAPM_INPUT("MICN"), |
| SND_SOC_DAPM_INPUT("MICP"), |
| SND_SOC_DAPM_INPUT("AUX"), |
| }; |
| |
| static const struct snd_soc_dapm_route audio_map[] = { |
| /* Mono output mixer */ |
| {"Mono Mixer", "PCM Playback Switch", "DAC"}, |
| {"Mono Mixer", "Aux Playback Switch", "Aux Input"}, |
| {"Mono Mixer", "Line Bypass Switch", "Boost Mixer"}, |
| |
| /* Speaker output mixer */ |
| {"Speaker Mixer", "PCM Playback Switch", "DAC"}, |
| {"Speaker Mixer", "Aux Playback Switch", "Aux Input"}, |
| {"Speaker Mixer", "Line Bypass Switch", "Boost Mixer"}, |
| |
| /* Outputs */ |
| {"Mono Out", NULL, "Mono Mixer"}, |
| {"MONOOUT", NULL, "Mono Out"}, |
| {"SpkN Out", NULL, "Speaker Mixer"}, |
| {"SpkP Out", NULL, "Speaker Mixer"}, |
| {"SPKOUTN", NULL, "SpkN Out"}, |
| {"SPKOUTP", NULL, "SpkP Out"}, |
| |
| /* Microphone PGA */ |
| {"Mic PGA", "MICN Switch", "MICN"}, |
| {"Mic PGA", "MICP Switch", "MICP"}, |
| {"Mic PGA", "AUX Switch", "AUX"}, |
| |
| /* Boost Mixer */ |
| {"Boost Mixer", "Mic PGA Switch", "Mic PGA"}, |
| {"Boost Mixer", "Mic Volume", "MICP"}, |
| {"Boost Mixer", "Aux Volume", "Aux Input"}, |
| |
| {"ADC", NULL, "Boost Mixer"}, |
| }; |
| |
| static int wm8940_add_widgets(struct snd_soc_codec *codec) |
| { |
| int ret; |
| |
| ret = snd_soc_dapm_new_controls(codec, wm8940_dapm_widgets, |
| ARRAY_SIZE(wm8940_dapm_widgets)); |
| if (ret) |
| goto error_ret; |
| ret = snd_soc_dapm_add_routes(codec, audio_map, ARRAY_SIZE(audio_map)); |
| if (ret) |
| goto error_ret; |
| |
| error_ret: |
| return ret; |
| } |
| |
| #define wm8940_reset(c) snd_soc_write(c, WM8940_SOFTRESET, 0); |
| |
| static int wm8940_set_dai_fmt(struct snd_soc_dai *codec_dai, |
| unsigned int fmt) |
| { |
| struct snd_soc_codec *codec = codec_dai->codec; |
| u16 iface = snd_soc_read(codec, WM8940_IFACE) & 0xFE67; |
| u16 clk = snd_soc_read(codec, WM8940_CLOCK) & 0x1fe; |
| |
| switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) { |
| case SND_SOC_DAIFMT_CBM_CFM: |
| clk |= 1; |
| break; |
| case SND_SOC_DAIFMT_CBS_CFS: |
| break; |
| default: |
| return -EINVAL; |
| } |
| snd_soc_write(codec, WM8940_CLOCK, clk); |
| |
| switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) { |
| case SND_SOC_DAIFMT_I2S: |
| iface |= (2 << 3); |
| break; |
| case SND_SOC_DAIFMT_LEFT_J: |
| iface |= (1 << 3); |
| break; |
| case SND_SOC_DAIFMT_RIGHT_J: |
| break; |
| case SND_SOC_DAIFMT_DSP_A: |
| iface |= (3 << 3); |
| break; |
| case SND_SOC_DAIFMT_DSP_B: |
| iface |= (3 << 3) | (1 << 7); |
| break; |
| } |
| |
| switch (fmt & SND_SOC_DAIFMT_INV_MASK) { |
| case SND_SOC_DAIFMT_NB_NF: |
| break; |
| case SND_SOC_DAIFMT_NB_IF: |
| iface |= (1 << 7); |
| break; |
| case SND_SOC_DAIFMT_IB_NF: |
| iface |= (1 << 8); |
| break; |
| case SND_SOC_DAIFMT_IB_IF: |
| iface |= (1 << 8) | (1 << 7); |
| break; |
| } |
| |
| snd_soc_write(codec, WM8940_IFACE, iface); |
| |
| return 0; |
| } |
| |
| static int wm8940_i2s_hw_params(struct snd_pcm_substream *substream, |
| struct snd_pcm_hw_params *params, |
| struct snd_soc_dai *dai) |
| { |
| struct snd_soc_pcm_runtime *rtd = substream->private_data; |
| struct snd_soc_device *socdev = rtd->socdev; |
| struct snd_soc_codec *codec = socdev->card->codec; |
| u16 iface = snd_soc_read(codec, WM8940_IFACE) & 0xFD9F; |
| u16 addcntrl = snd_soc_read(codec, WM8940_ADDCNTRL) & 0xFFF1; |
| u16 companding = snd_soc_read(codec, |
| WM8940_COMPANDINGCTL) & 0xFFDF; |
| int ret; |
| |
| /* LoutR control */ |
| if (substream->stream == SNDRV_PCM_STREAM_CAPTURE |
| && params_channels(params) == 2) |
| iface |= (1 << 9); |
| |
| switch (params_rate(params)) { |
| case 8000: |
| addcntrl |= (0x5 << 1); |
| break; |
| case 11025: |
| addcntrl |= (0x4 << 1); |
| break; |
| case 16000: |
| addcntrl |= (0x3 << 1); |
| break; |
| case 22050: |
| addcntrl |= (0x2 << 1); |
| break; |
| case 32000: |
| addcntrl |= (0x1 << 1); |
| break; |
| case 44100: |
| case 48000: |
| break; |
| } |
| ret = snd_soc_write(codec, WM8940_ADDCNTRL, addcntrl); |
| if (ret) |
| goto error_ret; |
| |
| switch (params_format(params)) { |
| case SNDRV_PCM_FORMAT_S8: |
| companding = companding | (1 << 5); |
| break; |
| case SNDRV_PCM_FORMAT_S16_LE: |
| break; |
| case SNDRV_PCM_FORMAT_S20_3LE: |
| iface |= (1 << 5); |
| break; |
| case SNDRV_PCM_FORMAT_S24_LE: |
| iface |= (2 << 5); |
| break; |
| case SNDRV_PCM_FORMAT_S32_LE: |
| iface |= (3 << 5); |
| break; |
| } |
| ret = snd_soc_write(codec, WM8940_COMPANDINGCTL, companding); |
| if (ret) |
| goto error_ret; |
| ret = snd_soc_write(codec, WM8940_IFACE, iface); |
| |
| error_ret: |
| return ret; |
| } |
| |
| static int wm8940_mute(struct snd_soc_dai *dai, int mute) |
| { |
| struct snd_soc_codec *codec = dai->codec; |
| u16 mute_reg = snd_soc_read(codec, WM8940_DAC) & 0xffbf; |
| |
| if (mute) |
| mute_reg |= 0x40; |
| |
| return snd_soc_write(codec, WM8940_DAC, mute_reg); |
| } |
| |
| static int wm8940_set_bias_level(struct snd_soc_codec *codec, |
| enum snd_soc_bias_level level) |
| { |
| u16 val; |
| u16 pwr_reg = snd_soc_read(codec, WM8940_POWER1) & 0x1F0; |
| int ret = 0; |
| |
| switch (level) { |
| case SND_SOC_BIAS_ON: |
| /* ensure bufioen and biasen */ |
| pwr_reg |= (1 << 2) | (1 << 3); |
| /* Enable thermal shutdown */ |
| val = snd_soc_read(codec, WM8940_OUTPUTCTL); |
| ret = snd_soc_write(codec, WM8940_OUTPUTCTL, val | 0x2); |
| if (ret) |
| break; |
| /* set vmid to 75k */ |
| ret = snd_soc_write(codec, WM8940_POWER1, pwr_reg | 0x1); |
| break; |
| case SND_SOC_BIAS_PREPARE: |
| /* ensure bufioen and biasen */ |
| pwr_reg |= (1 << 2) | (1 << 3); |
| ret = snd_soc_write(codec, WM8940_POWER1, pwr_reg | 0x1); |
| break; |
| case SND_SOC_BIAS_STANDBY: |
| /* ensure bufioen and biasen */ |
| pwr_reg |= (1 << 2) | (1 << 3); |
| /* set vmid to 300k for standby */ |
| ret = snd_soc_write(codec, WM8940_POWER1, pwr_reg | 0x2); |
| break; |
| case SND_SOC_BIAS_OFF: |
| ret = snd_soc_write(codec, WM8940_POWER1, pwr_reg); |
| break; |
| } |
| |
| return ret; |
| } |
| |
| struct pll_ { |
| unsigned int pre_scale:2; |
| unsigned int n:4; |
| unsigned int k; |
| }; |
| |
| static struct pll_ pll_div; |
| |
| /* The size in bits of the pll divide multiplied by 10 |
| * to allow rounding later */ |
| #define FIXED_PLL_SIZE ((1 << 24) * 10) |
| static void pll_factors(unsigned int target, unsigned int source) |
| { |
| unsigned long long Kpart; |
| unsigned int K, Ndiv, Nmod; |
| /* The left shift ist to avoid accuracy loss when right shifting */ |
| Ndiv = target / source; |
| |
| if (Ndiv > 12) { |
| source <<= 1; |
| /* Multiply by 2 */ |
| pll_div.pre_scale = 0; |
| Ndiv = target / source; |
| } else if (Ndiv < 3) { |
| source >>= 2; |
| /* Divide by 4 */ |
| pll_div.pre_scale = 3; |
| Ndiv = target / source; |
| } else if (Ndiv < 6) { |
| source >>= 1; |
| /* divide by 2 */ |
| pll_div.pre_scale = 2; |
| Ndiv = target / source; |
| } else |
| pll_div.pre_scale = 1; |
| |
| if ((Ndiv < 6) || (Ndiv > 12)) |
| printk(KERN_WARNING |
| "WM8940 N value %d outwith recommended range!d\n", |
| Ndiv); |
| |
| pll_div.n = Ndiv; |
| Nmod = target % source; |
| Kpart = FIXED_PLL_SIZE * (long long)Nmod; |
| |
| do_div(Kpart, source); |
| |
| K = Kpart & 0xFFFFFFFF; |
| |
| /* Check if we need to round */ |
| if ((K % 10) >= 5) |
| K += 5; |
| |
| /* Move down to proper range now rounding is done */ |
| K /= 10; |
| |
| pll_div.k = K; |
| } |
| |
| /* Untested at the moment */ |
| static int wm8940_set_dai_pll(struct snd_soc_dai *codec_dai, int pll_id, |
| int source, unsigned int freq_in, unsigned int freq_out) |
| { |
| struct snd_soc_codec *codec = codec_dai->codec; |
| u16 reg; |
| |
| /* Turn off PLL */ |
| reg = snd_soc_read(codec, WM8940_POWER1); |
| snd_soc_write(codec, WM8940_POWER1, reg & 0x1df); |
| |
| if (freq_in == 0 || freq_out == 0) { |
| /* Clock CODEC directly from MCLK */ |
| reg = snd_soc_read(codec, WM8940_CLOCK); |
| snd_soc_write(codec, WM8940_CLOCK, reg & 0x0ff); |
| /* Pll power down */ |
| snd_soc_write(codec, WM8940_PLLN, (1 << 7)); |
| return 0; |
| } |
| |
| /* Pll is followed by a frequency divide by 4 */ |
| pll_factors(freq_out*4, freq_in); |
| if (pll_div.k) |
| snd_soc_write(codec, WM8940_PLLN, |
| (pll_div.pre_scale << 4) | pll_div.n | (1 << 6)); |
| else /* No factional component */ |
| snd_soc_write(codec, WM8940_PLLN, |
| (pll_div.pre_scale << 4) | pll_div.n); |
| snd_soc_write(codec, WM8940_PLLK1, pll_div.k >> 18); |
| snd_soc_write(codec, WM8940_PLLK2, (pll_div.k >> 9) & 0x1ff); |
| snd_soc_write(codec, WM8940_PLLK3, pll_div.k & 0x1ff); |
| /* Enable the PLL */ |
| reg = snd_soc_read(codec, WM8940_POWER1); |
| snd_soc_write(codec, WM8940_POWER1, reg | 0x020); |
| |
| /* Run CODEC from PLL instead of MCLK */ |
| reg = snd_soc_read(codec, WM8940_CLOCK); |
| snd_soc_write(codec, WM8940_CLOCK, reg | 0x100); |
| |
| return 0; |
| } |
| |
| static int wm8940_set_dai_sysclk(struct snd_soc_dai *codec_dai, |
| int clk_id, unsigned int freq, int dir) |
| { |
| struct snd_soc_codec *codec = codec_dai->codec; |
| struct wm8940_priv *wm8940 = snd_soc_codec_get_drvdata(codec); |
| |
| switch (freq) { |
| case 11289600: |
| case 12000000: |
| case 12288000: |
| case 16934400: |
| case 18432000: |
| wm8940->sysclk = freq; |
| return 0; |
| } |
| return -EINVAL; |
| } |
| |
| static int wm8940_set_dai_clkdiv(struct snd_soc_dai *codec_dai, |
| int div_id, int div) |
| { |
| struct snd_soc_codec *codec = codec_dai->codec; |
| u16 reg; |
| int ret = 0; |
| |
| switch (div_id) { |
| case WM8940_BCLKDIV: |
| reg = snd_soc_read(codec, WM8940_CLOCK) & 0xFFEF3; |
| ret = snd_soc_write(codec, WM8940_CLOCK, reg | (div << 2)); |
| break; |
| case WM8940_MCLKDIV: |
| reg = snd_soc_read(codec, WM8940_CLOCK) & 0xFF1F; |
| ret = snd_soc_write(codec, WM8940_CLOCK, reg | (div << 5)); |
| break; |
| case WM8940_OPCLKDIV: |
| reg = snd_soc_read(codec, WM8940_ADDCNTRL) & 0xFFCF; |
| ret = snd_soc_write(codec, WM8940_ADDCNTRL, reg | (div << 4)); |
| break; |
| } |
| return ret; |
| } |
| |
| #define WM8940_RATES SNDRV_PCM_RATE_8000_48000 |
| |
| #define WM8940_FORMATS (SNDRV_PCM_FMTBIT_S8 | \ |
| SNDRV_PCM_FMTBIT_S16_LE | \ |
| SNDRV_PCM_FMTBIT_S20_3LE | \ |
| SNDRV_PCM_FMTBIT_S24_LE | \ |
| SNDRV_PCM_FMTBIT_S32_LE) |
| |
| static struct snd_soc_dai_ops wm8940_dai_ops = { |
| .hw_params = wm8940_i2s_hw_params, |
| .set_sysclk = wm8940_set_dai_sysclk, |
| .digital_mute = wm8940_mute, |
| .set_fmt = wm8940_set_dai_fmt, |
| .set_clkdiv = wm8940_set_dai_clkdiv, |
| .set_pll = wm8940_set_dai_pll, |
| }; |
| |
| struct snd_soc_dai wm8940_dai = { |
| .name = "WM8940", |
| .playback = { |
| .stream_name = "Playback", |
| .channels_min = 1, |
| .channels_max = 2, |
| .rates = WM8940_RATES, |
| .formats = WM8940_FORMATS, |
| }, |
| .capture = { |
| .stream_name = "Capture", |
| .channels_min = 1, |
| .channels_max = 2, |
| .rates = WM8940_RATES, |
| .formats = WM8940_FORMATS, |
| }, |
| .ops = &wm8940_dai_ops, |
| .symmetric_rates = 1, |
| }; |
| EXPORT_SYMBOL_GPL(wm8940_dai); |
| |
| static int wm8940_suspend(struct platform_device *pdev, pm_message_t state) |
| { |
| struct snd_soc_device *socdev = platform_get_drvdata(pdev); |
| struct snd_soc_codec *codec = socdev->card->codec; |
| |
| return wm8940_set_bias_level(codec, SND_SOC_BIAS_OFF); |
| } |
| |
| static int wm8940_resume(struct platform_device *pdev) |
| { |
| struct snd_soc_device *socdev = platform_get_drvdata(pdev); |
| struct snd_soc_codec *codec = socdev->card->codec; |
| int i; |
| int ret; |
| u8 data[3]; |
| u16 *cache = codec->reg_cache; |
| |
| /* Sync reg_cache with the hardware |
| * Could use auto incremented writes to speed this up |
| */ |
| for (i = 0; i < ARRAY_SIZE(wm8940_reg_defaults); i++) { |
| data[0] = i; |
| data[1] = (cache[i] & 0xFF00) >> 8; |
| data[2] = cache[i] & 0x00FF; |
| ret = codec->hw_write(codec->control_data, data, 3); |
| if (ret < 0) |
| goto error_ret; |
| else if (ret != 3) { |
| ret = -EIO; |
| goto error_ret; |
| } |
| } |
| ret = wm8940_set_bias_level(codec, SND_SOC_BIAS_STANDBY); |
| if (ret) |
| goto error_ret; |
| ret = wm8940_set_bias_level(codec, codec->suspend_bias_level); |
| |
| error_ret: |
| return ret; |
| } |
| |
| static struct snd_soc_codec *wm8940_codec; |
| |
| static int wm8940_probe(struct platform_device *pdev) |
| { |
| struct snd_soc_device *socdev = platform_get_drvdata(pdev); |
| struct snd_soc_codec *codec; |
| |
| int ret = 0; |
| |
| if (wm8940_codec == NULL) { |
| dev_err(&pdev->dev, "Codec device not registered\n"); |
| return -ENODEV; |
| } |
| |
| socdev->card->codec = wm8940_codec; |
| codec = wm8940_codec; |
| |
| mutex_init(&codec->mutex); |
| /* register pcms */ |
| ret = snd_soc_new_pcms(socdev, SNDRV_DEFAULT_IDX1, SNDRV_DEFAULT_STR1); |
| if (ret < 0) { |
| dev_err(codec->dev, "failed to create pcms: %d\n", ret); |
| goto pcm_err; |
| } |
| |
| ret = snd_soc_add_controls(codec, wm8940_snd_controls, |
| ARRAY_SIZE(wm8940_snd_controls)); |
| if (ret) |
| goto error_free_pcms; |
| ret = wm8940_add_widgets(codec); |
| if (ret) |
| goto error_free_pcms; |
| |
| return ret; |
| |
| error_free_pcms: |
| snd_soc_free_pcms(socdev); |
| snd_soc_dapm_free(socdev); |
| pcm_err: |
| return ret; |
| } |
| |
| static int wm8940_remove(struct platform_device *pdev) |
| { |
| struct snd_soc_device *socdev = platform_get_drvdata(pdev); |
| |
| snd_soc_free_pcms(socdev); |
| snd_soc_dapm_free(socdev); |
| |
| return 0; |
| } |
| |
| struct snd_soc_codec_device soc_codec_dev_wm8940 = { |
| .probe = wm8940_probe, |
| .remove = wm8940_remove, |
| .suspend = wm8940_suspend, |
| .resume = wm8940_resume, |
| }; |
| EXPORT_SYMBOL_GPL(soc_codec_dev_wm8940); |
| |
| static int wm8940_register(struct wm8940_priv *wm8940, |
| enum snd_soc_control_type control) |
| { |
| struct wm8940_setup_data *pdata = wm8940->codec.dev->platform_data; |
| struct snd_soc_codec *codec = &wm8940->codec; |
| int ret; |
| u16 reg; |
| if (wm8940_codec) { |
| dev_err(codec->dev, "Another WM8940 is registered\n"); |
| return -EINVAL; |
| } |
| |
| INIT_LIST_HEAD(&codec->dapm_widgets); |
| INIT_LIST_HEAD(&codec->dapm_paths); |
| |
| snd_soc_codec_set_drvdata(codec, wm8940); |
| codec->name = "WM8940"; |
| codec->owner = THIS_MODULE; |
| codec->bias_level = SND_SOC_BIAS_OFF; |
| codec->set_bias_level = wm8940_set_bias_level; |
| codec->dai = &wm8940_dai; |
| codec->num_dai = 1; |
| codec->reg_cache_size = ARRAY_SIZE(wm8940_reg_defaults); |
| codec->reg_cache = &wm8940->reg_cache; |
| |
| ret = snd_soc_codec_set_cache_io(codec, 8, 16, control); |
| if (ret < 0) { |
| dev_err(codec->dev, "Failed to set cache I/O: %d\n", ret); |
| return ret; |
| } |
| |
| memcpy(codec->reg_cache, wm8940_reg_defaults, |
| sizeof(wm8940_reg_defaults)); |
| |
| ret = wm8940_reset(codec); |
| if (ret < 0) { |
| dev_err(codec->dev, "Failed to issue reset\n"); |
| return ret; |
| } |
| |
| wm8940_dai.dev = codec->dev; |
| |
| wm8940_set_bias_level(codec, SND_SOC_BIAS_STANDBY); |
| |
| ret = snd_soc_write(codec, WM8940_POWER1, 0x180); |
| if (ret < 0) |
| return ret; |
| |
| if (!pdata) |
| dev_warn(codec->dev, "No platform data supplied\n"); |
| else { |
| reg = snd_soc_read(codec, WM8940_OUTPUTCTL); |
| ret = snd_soc_write(codec, WM8940_OUTPUTCTL, reg | pdata->vroi); |
| if (ret < 0) |
| return ret; |
| } |
| |
| |
| wm8940_codec = codec; |
| |
| ret = snd_soc_register_codec(codec); |
| if (ret) { |
| dev_err(codec->dev, "Failed to register codec: %d\n", ret); |
| return ret; |
| } |
| |
| ret = snd_soc_register_dai(&wm8940_dai); |
| if (ret) { |
| dev_err(codec->dev, "Failed to register DAI: %d\n", ret); |
| snd_soc_unregister_codec(codec); |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| static void wm8940_unregister(struct wm8940_priv *wm8940) |
| { |
| wm8940_set_bias_level(&wm8940->codec, SND_SOC_BIAS_OFF); |
| snd_soc_unregister_dai(&wm8940_dai); |
| snd_soc_unregister_codec(&wm8940->codec); |
| kfree(wm8940); |
| wm8940_codec = NULL; |
| } |
| |
| static int wm8940_i2c_probe(struct i2c_client *i2c, |
| const struct i2c_device_id *id) |
| { |
| struct wm8940_priv *wm8940; |
| struct snd_soc_codec *codec; |
| |
| wm8940 = kzalloc(sizeof *wm8940, GFP_KERNEL); |
| if (wm8940 == NULL) |
| return -ENOMEM; |
| |
| codec = &wm8940->codec; |
| codec->hw_write = (hw_write_t)i2c_master_send; |
| i2c_set_clientdata(i2c, wm8940); |
| codec->control_data = i2c; |
| codec->dev = &i2c->dev; |
| |
| return wm8940_register(wm8940, SND_SOC_I2C); |
| } |
| |
| static int __devexit wm8940_i2c_remove(struct i2c_client *client) |
| { |
| struct wm8940_priv *wm8940 = i2c_get_clientdata(client); |
| |
| wm8940_unregister(wm8940); |
| |
| return 0; |
| } |
| |
| static const struct i2c_device_id wm8940_i2c_id[] = { |
| { "wm8940", 0 }, |
| { } |
| }; |
| MODULE_DEVICE_TABLE(i2c, wm8940_i2c_id); |
| |
| static struct i2c_driver wm8940_i2c_driver = { |
| .driver = { |
| .name = "WM8940 I2C Codec", |
| .owner = THIS_MODULE, |
| }, |
| .probe = wm8940_i2c_probe, |
| .remove = __devexit_p(wm8940_i2c_remove), |
| .id_table = wm8940_i2c_id, |
| }; |
| |
| static int __init wm8940_modinit(void) |
| { |
| int ret; |
| |
| ret = i2c_add_driver(&wm8940_i2c_driver); |
| if (ret) |
| printk(KERN_ERR "Failed to register WM8940 I2C driver: %d\n", |
| ret); |
| return ret; |
| } |
| module_init(wm8940_modinit); |
| |
| static void __exit wm8940_exit(void) |
| { |
| i2c_del_driver(&wm8940_i2c_driver); |
| } |
| module_exit(wm8940_exit); |
| |
| MODULE_DESCRIPTION("ASoC WM8940 driver"); |
| MODULE_AUTHOR("Jonathan Cameron"); |
| MODULE_LICENSE("GPL"); |