| /* |
| * AMD Alchemy Semi PB1550 Referrence Board |
| * Board Registers defines. |
| * |
| * Copyright 2004 Embedded Edge LLC. |
| * Copyright 2005 Ralf Baechle (ralf@linux-mips.org) |
| * |
| * ######################################################################## |
| * |
| * This program is free software; you can distribute it and/or modify it |
| * under the terms of the GNU General Public License (Version 2) as |
| * published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope it will be useful, but WITHOUT |
| * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or |
| * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License |
| * for more details. |
| * |
| * You should have received a copy of the GNU General Public License along |
| * with this program; if not, write to the Free Software Foundation, Inc., |
| * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. |
| * |
| * ######################################################################## |
| * |
| * |
| */ |
| #ifndef __ASM_PB1550_H |
| #define __ASM_PB1550_H |
| |
| #include <linux/types.h> |
| #include <asm/mach-au1x00/au1xxx_psc.h> |
| |
| #define DBDMA_AC97_TX_CHAN DSCR_CMD0_PSC1_TX |
| #define DBDMA_AC97_RX_CHAN DSCR_CMD0_PSC1_RX |
| #define DBDMA_I2S_TX_CHAN DSCR_CMD0_PSC3_TX |
| #define DBDMA_I2S_RX_CHAN DSCR_CMD0_PSC3_RX |
| |
| #define SPI_PSC_BASE PSC0_BASE_ADDR |
| #define AC97_PSC_BASE PSC1_BASE_ADDR |
| #define SMBUS_PSC_BASE PSC2_BASE_ADDR |
| #define I2S_PSC_BASE PSC3_BASE_ADDR |
| |
| #if defined(CONFIG_MTD_PB1550_BOOT) && defined(CONFIG_MTD_PB1550_USER) |
| #define PB1550_BOTH_BANKS |
| #elif defined(CONFIG_MTD_PB1550_BOOT) && !defined(CONFIG_MTD_PB1550_USER) |
| #define PB1550_BOOT_ONLY |
| #elif !defined(CONFIG_MTD_PB1550_BOOT) && defined(CONFIG_MTD_PB1550_USER) |
| #define PB1550_USER_ONLY |
| #endif |
| |
| /* |
| * Timing values as described in databook, * ns value stripped of |
| * lower 2 bits. |
| * These defines are here rather than an SOC1550 generic file because |
| * the parts chosen on another board may be different and may require |
| * different timings. |
| */ |
| #define NAND_T_H (18 >> 2) |
| #define NAND_T_PUL (30 >> 2) |
| #define NAND_T_SU (30 >> 2) |
| #define NAND_T_WH (30 >> 2) |
| |
| /* Bitfield shift amounts */ |
| #define NAND_T_H_SHIFT 0 |
| #define NAND_T_PUL_SHIFT 4 |
| #define NAND_T_SU_SHIFT 8 |
| #define NAND_T_WH_SHIFT 12 |
| |
| #define NAND_TIMING (((NAND_T_H & 0xF) << NAND_T_H_SHIFT) | \ |
| ((NAND_T_PUL & 0xF) << NAND_T_PUL_SHIFT) | \ |
| ((NAND_T_SU & 0xF) << NAND_T_SU_SHIFT) | \ |
| ((NAND_T_WH & 0xF) << NAND_T_WH_SHIFT)) |
| |
| #define NAND_CS 1 |
| |
| /* Should be done by YAMON */ |
| #define NAND_STCFG 0x00400005 /* 8-bit NAND */ |
| #define NAND_STTIME 0x00007774 /* valid for 396 MHz SD=2 only */ |
| #define NAND_STADDR 0x12000FFF /* physical address 0x20000000 */ |
| |
| #endif /* __ASM_PB1550_H */ |