| /* |
| * Oak Generic NCR5380 driver |
| * |
| * Copyright 1995-2002, Russell King |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/signal.h> |
| #include <linux/ioport.h> |
| #include <linux/delay.h> |
| #include <linux/blkdev.h> |
| #include <linux/init.h> |
| |
| #include <asm/ecard.h> |
| #include <asm/io.h> |
| |
| #include "../scsi.h" |
| #include <scsi/scsi_host.h> |
| |
| #define AUTOSENSE |
| /*#define PSEUDO_DMA*/ |
| |
| #define OAKSCSI_PUBLIC_RELEASE 1 |
| #define DONT_USE_INTR |
| |
| #define priv(host) ((struct NCR5380_hostdata *)(host)->hostdata) |
| #define NCR5380_local_declare() void __iomem *_base |
| #define NCR5380_setup(host) _base = priv(host)->base |
| |
| #define NCR5380_read(reg) readb(_base + ((reg) << 2)) |
| #define NCR5380_write(reg, value) writeb(value, _base + ((reg) << 2)) |
| #define NCR5380_intr oakscsi_intr |
| #define NCR5380_queue_command oakscsi_queue_command |
| #define NCR5380_proc_info oakscsi_proc_info |
| |
| #define NCR5380_implementation_fields \ |
| void __iomem *base |
| |
| #define BOARD_NORMAL 0 |
| #define BOARD_NCR53C400 1 |
| |
| #include "../NCR5380.h" |
| |
| #undef START_DMA_INITIATOR_RECEIVE_REG |
| #define START_DMA_INITIATOR_RECEIVE_REG (128 + 7) |
| |
| const char * oakscsi_info (struct Scsi_Host *spnt) |
| { |
| return ""; |
| } |
| |
| #define STAT ((128 + 16) << 2) |
| #define DATA ((128 + 8) << 2) |
| |
| static inline int NCR5380_pwrite(struct Scsi_Host *instance, unsigned char *addr, |
| int len) |
| { |
| void __iomem *base = priv(instance)->base; |
| |
| printk("writing %p len %d\n",addr, len); |
| if(!len) return -1; |
| |
| while(1) |
| { |
| int status; |
| while (((status = readw(base + STAT)) & 0x100)==0); |
| } |
| } |
| |
| static inline int NCR5380_pread(struct Scsi_Host *instance, unsigned char *addr, |
| int len) |
| { |
| void __iomem *base = priv(instance)->base; |
| printk("reading %p len %d\n", addr, len); |
| while(len > 0) |
| { |
| unsigned int status, timeout; |
| unsigned long b; |
| |
| timeout = 0x01FFFFFF; |
| |
| while (((status = readw(base + STAT)) & 0x100)==0) |
| { |
| timeout--; |
| if(status & 0x200 || !timeout) |
| { |
| printk("status = %08X\n", status); |
| return 1; |
| } |
| } |
| |
| if(len >= 128) |
| { |
| readsw(base + DATA, addr, 128); |
| addr += 128; |
| len -= 128; |
| } |
| else |
| { |
| b = (unsigned long) readw(base + DATA); |
| *addr ++ = b; |
| len -= 1; |
| if(len) |
| *addr ++ = b>>8; |
| len -= 1; |
| } |
| } |
| return 0; |
| } |
| |
| #undef STAT |
| #undef DATA |
| |
| #include "../NCR5380.c" |
| |
| static struct scsi_host_template oakscsi_template = { |
| .module = THIS_MODULE, |
| .proc_info = oakscsi_proc_info, |
| .name = "Oak 16-bit SCSI", |
| .info = oakscsi_info, |
| .queuecommand = oakscsi_queue_command, |
| .eh_abort_handler = NCR5380_abort, |
| .eh_bus_reset_handler = NCR5380_bus_reset, |
| .can_queue = 16, |
| .this_id = 7, |
| .sg_tablesize = SG_ALL, |
| .cmd_per_lun = 2, |
| .use_clustering = DISABLE_CLUSTERING, |
| .proc_name = "oakscsi", |
| }; |
| |
| static int __devinit |
| oakscsi_probe(struct expansion_card *ec, const struct ecard_id *id) |
| { |
| struct Scsi_Host *host; |
| int ret = -ENOMEM; |
| |
| ret = ecard_request_resources(ec); |
| if (ret) |
| goto out; |
| |
| host = scsi_host_alloc(&oakscsi_template, sizeof(struct NCR5380_hostdata)); |
| if (!host) { |
| ret = -ENOMEM; |
| goto release; |
| } |
| |
| priv(host)->base = ioremap(ecard_resource_start(ec, ECARD_RES_MEMC), |
| ecard_resource_len(ec, ECARD_RES_MEMC)); |
| if (!priv(host)->base) { |
| ret = -ENOMEM; |
| goto unreg; |
| } |
| |
| host->irq = IRQ_NONE; |
| host->n_io_port = 255; |
| |
| NCR5380_init(host, 0); |
| |
| printk("scsi%d: at port 0x%08lx irqs disabled", |
| host->host_no, host->io_port); |
| printk(" options CAN_QUEUE=%d CMD_PER_LUN=%d release=%d", |
| host->can_queue, host->cmd_per_lun, OAKSCSI_PUBLIC_RELEASE); |
| printk("\nscsi%d:", host->host_no); |
| NCR5380_print_options(host); |
| printk("\n"); |
| |
| ret = scsi_add_host(host, &ec->dev); |
| if (ret) |
| goto out_unmap; |
| |
| scsi_scan_host(host); |
| goto out; |
| |
| out_unmap: |
| iounmap(priv(host)->base); |
| unreg: |
| scsi_host_put(host); |
| release: |
| ecard_release_resources(ec); |
| out: |
| return ret; |
| } |
| |
| static void __devexit oakscsi_remove(struct expansion_card *ec) |
| { |
| struct Scsi_Host *host = ecard_get_drvdata(ec); |
| |
| ecard_set_drvdata(ec, NULL); |
| scsi_remove_host(host); |
| |
| NCR5380_exit(host); |
| iounmap(priv(host)->base); |
| scsi_host_put(host); |
| ecard_release_resources(ec); |
| } |
| |
| static const struct ecard_id oakscsi_cids[] = { |
| { MANU_OAK, PROD_OAK_SCSI }, |
| { 0xffff, 0xffff } |
| }; |
| |
| static struct ecard_driver oakscsi_driver = { |
| .probe = oakscsi_probe, |
| .remove = __devexit_p(oakscsi_remove), |
| .id_table = oakscsi_cids, |
| .drv = { |
| .name = "oakscsi", |
| }, |
| }; |
| |
| static int __init oakscsi_init(void) |
| { |
| return ecard_register_driver(&oakscsi_driver); |
| } |
| |
| static void __exit oakscsi_exit(void) |
| { |
| ecard_remove_driver(&oakscsi_driver); |
| } |
| |
| module_init(oakscsi_init); |
| module_exit(oakscsi_exit); |
| |
| MODULE_AUTHOR("Russell King"); |
| MODULE_DESCRIPTION("Oak SCSI driver"); |
| MODULE_LICENSE("GPL"); |
| |