| /* |
| * linux/arch/mips/txx9/pci.c |
| * |
| * Based on linux/arch/mips/txx9/rbtx4927/setup.c, |
| * linux/arch/mips/txx9/rbtx4938/setup.c, |
| * and RBTX49xx patch from CELF patch archive. |
| * |
| * Copyright 2001-2005 MontaVista Software Inc. |
| * Copyright (C) 1996, 97, 2001, 04 Ralf Baechle (ralf@linux-mips.org) |
| * (C) Copyright TOSHIBA CORPORATION 2000-2001, 2004-2007 |
| * |
| * This file is subject to the terms and conditions of the GNU General Public |
| * License. See the file "COPYING" in the main directory of this archive |
| * for more details. |
| */ |
| #include <linux/delay.h> |
| #include <linux/jiffies.h> |
| #include <linux/io.h> |
| #include <asm/txx9/generic.h> |
| #include <asm/txx9/pci.h> |
| #ifdef CONFIG_TOSHIBA_FPCIB0 |
| #include <linux/interrupt.h> |
| #include <linux/slab.h> |
| #include <asm/i8259.h> |
| #include <asm/txx9/smsc_fdc37m81x.h> |
| #endif |
| |
| static int __init |
| early_read_config_word(struct pci_controller *hose, |
| int top_bus, int bus, int devfn, int offset, u16 *value) |
| { |
| struct pci_dev fake_dev; |
| struct pci_bus fake_bus; |
| |
| fake_dev.bus = &fake_bus; |
| fake_dev.sysdata = hose; |
| fake_dev.devfn = devfn; |
| fake_bus.number = bus; |
| fake_bus.sysdata = hose; |
| fake_bus.ops = hose->pci_ops; |
| |
| if (bus != top_bus) |
| /* Fake a parent bus structure. */ |
| fake_bus.parent = &fake_bus; |
| else |
| fake_bus.parent = NULL; |
| |
| return pci_read_config_word(&fake_dev, offset, value); |
| } |
| |
| int __init txx9_pci66_check(struct pci_controller *hose, int top_bus, |
| int current_bus) |
| { |
| u32 pci_devfn; |
| unsigned short vid; |
| int cap66 = -1; |
| u16 stat; |
| |
| /* It seems SLC90E66 needs some time after PCI reset... */ |
| mdelay(80); |
| |
| printk(KERN_INFO "PCI: Checking 66MHz capabilities...\n"); |
| |
| for (pci_devfn = 0; pci_devfn < 0xff; pci_devfn++) { |
| if (PCI_FUNC(pci_devfn)) |
| continue; |
| if (early_read_config_word(hose, top_bus, current_bus, |
| pci_devfn, PCI_VENDOR_ID, &vid) != |
| PCIBIOS_SUCCESSFUL) |
| continue; |
| if (vid == 0xffff) |
| continue; |
| |
| /* check 66MHz capability */ |
| if (cap66 < 0) |
| cap66 = 1; |
| if (cap66) { |
| early_read_config_word(hose, top_bus, current_bus, |
| pci_devfn, PCI_STATUS, &stat); |
| if (!(stat & PCI_STATUS_66MHZ)) { |
| printk(KERN_DEBUG |
| "PCI: %02x:%02x not 66MHz capable.\n", |
| current_bus, pci_devfn); |
| cap66 = 0; |
| break; |
| } |
| } |
| } |
| return cap66 > 0; |
| } |
| |
| static struct resource primary_pci_mem_res[2] = { |
| { .name = "PCI MEM" }, |
| { .name = "PCI MMIO" }, |
| }; |
| static struct resource primary_pci_io_res = { .name = "PCI IO" }; |
| struct pci_controller txx9_primary_pcic = { |
| .mem_resource = &primary_pci_mem_res[0], |
| .io_resource = &primary_pci_io_res, |
| }; |
| |
| #ifdef CONFIG_64BIT |
| int txx9_pci_mem_high __initdata = 1; |
| #else |
| int txx9_pci_mem_high __initdata; |
| #endif |
| |
| /* |
| * allocate pci_controller and resources. |
| * mem_base, io_base: physical address. 0 for auto assignment. |
| * mem_size and io_size means max size on auto assignment. |
| * pcic must be &txx9_primary_pcic or NULL. |
| */ |
| struct pci_controller *__init |
| txx9_alloc_pci_controller(struct pci_controller *pcic, |
| unsigned long mem_base, unsigned long mem_size, |
| unsigned long io_base, unsigned long io_size) |
| { |
| struct pcic { |
| struct pci_controller c; |
| struct resource r_mem[2]; |
| struct resource r_io; |
| } *new = NULL; |
| int min_size = 0x10000; |
| |
| if (!pcic) { |
| new = kzalloc(sizeof(*new), GFP_KERNEL); |
| if (!new) |
| return NULL; |
| new->r_mem[0].name = "PCI mem"; |
| new->r_mem[1].name = "PCI mmio"; |
| new->r_io.name = "PCI io"; |
| new->c.mem_resource = new->r_mem; |
| new->c.io_resource = &new->r_io; |
| pcic = &new->c; |
| } else |
| BUG_ON(pcic != &txx9_primary_pcic); |
| pcic->io_resource->flags = IORESOURCE_IO; |
| |
| /* |
| * for auto assignment, first search a (big) region for PCI |
| * MEM, then search a region for PCI IO. |
| */ |
| if (mem_base) { |
| pcic->mem_resource[0].start = mem_base; |
| pcic->mem_resource[0].end = mem_base + mem_size - 1; |
| if (request_resource(&iomem_resource, &pcic->mem_resource[0])) |
| goto free_and_exit; |
| } else { |
| unsigned long min = 0, max = 0x20000000; /* low 512MB */ |
| if (!mem_size) { |
| /* default size for auto assignment */ |
| if (txx9_pci_mem_high) |
| mem_size = 0x20000000; /* mem:512M(max) */ |
| else |
| mem_size = 0x08000000; /* mem:128M(max) */ |
| } |
| if (txx9_pci_mem_high) { |
| min = 0x20000000; |
| max = 0xe0000000; |
| } |
| /* search free region for PCI MEM */ |
| for (; mem_size >= min_size; mem_size /= 2) { |
| if (allocate_resource(&iomem_resource, |
| &pcic->mem_resource[0], |
| mem_size, min, max, |
| mem_size, NULL, NULL) == 0) |
| break; |
| } |
| if (mem_size < min_size) |
| goto free_and_exit; |
| } |
| |
| pcic->mem_resource[1].flags = IORESOURCE_MEM | IORESOURCE_BUSY; |
| if (io_base) { |
| pcic->mem_resource[1].start = io_base; |
| pcic->mem_resource[1].end = io_base + io_size - 1; |
| if (request_resource(&iomem_resource, &pcic->mem_resource[1])) |
| goto release_and_exit; |
| } else { |
| if (!io_size) |
| /* default size for auto assignment */ |
| io_size = 0x01000000; /* io:16M(max) */ |
| /* search free region for PCI IO in low 512MB */ |
| for (; io_size >= min_size; io_size /= 2) { |
| if (allocate_resource(&iomem_resource, |
| &pcic->mem_resource[1], |
| io_size, 0, 0x20000000, |
| io_size, NULL, NULL) == 0) |
| break; |
| } |
| if (io_size < min_size) |
| goto release_and_exit; |
| io_base = pcic->mem_resource[1].start; |
| } |
| |
| pcic->mem_resource[0].flags = IORESOURCE_MEM; |
| if (pcic == &txx9_primary_pcic && |
| mips_io_port_base == (unsigned long)-1) { |
| /* map ioport 0 to PCI I/O space address 0 */ |
| set_io_port_base(IO_BASE + pcic->mem_resource[1].start); |
| pcic->io_resource->start = 0; |
| pcic->io_offset = 0; /* busaddr == ioaddr */ |
| pcic->io_map_base = IO_BASE + pcic->mem_resource[1].start; |
| } else { |
| /* physaddr to ioaddr */ |
| pcic->io_resource->start = |
| io_base - (mips_io_port_base - IO_BASE); |
| pcic->io_offset = io_base - (mips_io_port_base - IO_BASE); |
| pcic->io_map_base = mips_io_port_base; |
| } |
| pcic->io_resource->end = pcic->io_resource->start + io_size - 1; |
| |
| pcic->mem_offset = 0; /* busaddr == physaddr */ |
| |
| printk(KERN_INFO "PCI: IO %pR MEM %pR\n", |
| &pcic->mem_resource[1], &pcic->mem_resource[0]); |
| |
| /* register_pci_controller() will request MEM resource */ |
| release_resource(&pcic->mem_resource[0]); |
| return pcic; |
| release_and_exit: |
| release_resource(&pcic->mem_resource[0]); |
| free_and_exit: |
| kfree(new); |
| printk(KERN_ERR "PCI: Failed to allocate resources.\n"); |
| return NULL; |
| } |
| |
| static int __init |
| txx9_arch_pci_init(void) |
| { |
| PCIBIOS_MIN_IO = 0x8000; /* reseve legacy I/O space */ |
| return 0; |
| } |
| arch_initcall(txx9_arch_pci_init); |
| |
| /* IRQ/IDSEL mapping */ |
| int txx9_pci_option = |
| #ifdef CONFIG_PICMG_PCI_BACKPLANE_DEFAULT |
| TXX9_PCI_OPT_PICMG | |
| #endif |
| TXX9_PCI_OPT_CLK_AUTO; |
| |
| enum txx9_pci_err_action txx9_pci_err_action = TXX9_PCI_ERR_REPORT; |
| |
| #ifdef CONFIG_TOSHIBA_FPCIB0 |
| static irqreturn_t i8259_interrupt(int irq, void *dev_id) |
| { |
| int isairq; |
| |
| isairq = i8259_irq(); |
| if (unlikely(isairq <= I8259A_IRQ_BASE)) |
| return IRQ_NONE; |
| generic_handle_irq(isairq); |
| return IRQ_HANDLED; |
| } |
| |
| static int __devinit |
| txx9_i8259_irq_setup(int irq) |
| { |
| int err; |
| |
| init_i8259_irqs(); |
| err = request_irq(irq, &i8259_interrupt, IRQF_SHARED, |
| "cascade(i8259)", (void *)(long)irq); |
| if (!err) |
| printk(KERN_INFO "PCI-ISA bridge PIC (irq %d)\n", irq); |
| return err; |
| } |
| |
| static void __devinit quirk_slc90e66_bridge(struct pci_dev *dev) |
| { |
| int irq; /* PCI/ISA Bridge interrupt */ |
| u8 reg_64; |
| u32 reg_b0; |
| u8 reg_e1; |
| irq = pcibios_map_irq(dev, PCI_SLOT(dev->devfn), 1); /* INTA */ |
| if (!irq) |
| return; |
| txx9_i8259_irq_setup(irq); |
| pci_read_config_byte(dev, 0x64, ®_64); |
| pci_read_config_dword(dev, 0xb0, ®_b0); |
| pci_read_config_byte(dev, 0xe1, ®_e1); |
| /* serial irq control */ |
| reg_64 = 0xd0; |
| /* serial irq pin */ |
| reg_b0 |= 0x00010000; |
| /* ide irq on isa14 */ |
| reg_e1 &= 0xf0; |
| reg_e1 |= 0x0d; |
| pci_write_config_byte(dev, 0x64, reg_64); |
| pci_write_config_dword(dev, 0xb0, reg_b0); |
| pci_write_config_byte(dev, 0xe1, reg_e1); |
| |
| smsc_fdc37m81x_init(0x3f0); |
| smsc_fdc37m81x_config_beg(); |
| smsc_fdc37m81x_config_set(SMSC_FDC37M81X_DNUM, |
| SMSC_FDC37M81X_KBD); |
| smsc_fdc37m81x_config_set(SMSC_FDC37M81X_INT, 1); |
| smsc_fdc37m81x_config_set(SMSC_FDC37M81X_INT2, 12); |
| smsc_fdc37m81x_config_set(SMSC_FDC37M81X_ACTIVE, |
| 1); |
| smsc_fdc37m81x_config_end(); |
| } |
| |
| static void __devinit quirk_slc90e66_ide(struct pci_dev *dev) |
| { |
| unsigned char dat; |
| int regs[2] = {0x41, 0x43}; |
| int i; |
| |
| /* SMSC SLC90E66 IDE uses irq 14, 15 (default) */ |
| pci_write_config_byte(dev, PCI_INTERRUPT_LINE, 14); |
| pci_read_config_byte(dev, PCI_INTERRUPT_LINE, &dat); |
| printk(KERN_INFO "PCI: %s: IRQ %02x", pci_name(dev), dat); |
| /* enable SMSC SLC90E66 IDE */ |
| for (i = 0; i < ARRAY_SIZE(regs); i++) { |
| pci_read_config_byte(dev, regs[i], &dat); |
| pci_write_config_byte(dev, regs[i], dat | 0x80); |
| pci_read_config_byte(dev, regs[i], &dat); |
| printk(KERN_CONT " IDETIM%d %02x", i, dat); |
| } |
| pci_read_config_byte(dev, 0x5c, &dat); |
| /* |
| * !!! DO NOT REMOVE THIS COMMENT IT IS REQUIRED BY SMSC !!! |
| * |
| * This line of code is intended to provide the user with a work |
| * around solution to the anomalies cited in SMSC's anomaly sheet |
| * entitled, "SLC90E66 Functional Rev.J_0.1 Anomalies"". |
| * |
| * !!! DO NOT REMOVE THIS COMMENT IT IS REQUIRED BY SMSC !!! |
| */ |
| dat |= 0x01; |
| pci_write_config_byte(dev, regs[i], dat); |
| pci_read_config_byte(dev, 0x5c, &dat); |
| printk(KERN_CONT " REG5C %02x", dat); |
| printk(KERN_CONT "\n"); |
| } |
| #endif /* CONFIG_TOSHIBA_FPCIB0 */ |
| |
| static void __devinit tc35815_fixup(struct pci_dev *dev) |
| { |
| /* This device may have PM registers but not they are not supported. */ |
| if (dev->pm_cap) { |
| dev_info(&dev->dev, "PM disabled\n"); |
| dev->pm_cap = 0; |
| } |
| } |
| |
| static void __devinit final_fixup(struct pci_dev *dev) |
| { |
| unsigned char bist; |
| |
| /* Do build-in self test */ |
| if (pci_read_config_byte(dev, PCI_BIST, &bist) == PCIBIOS_SUCCESSFUL && |
| (bist & PCI_BIST_CAPABLE)) { |
| unsigned long timeout; |
| pci_set_power_state(dev, PCI_D0); |
| printk(KERN_INFO "PCI: %s BIST...", pci_name(dev)); |
| pci_write_config_byte(dev, PCI_BIST, PCI_BIST_START); |
| timeout = jiffies + HZ * 2; /* timeout after 2 sec */ |
| do { |
| pci_read_config_byte(dev, PCI_BIST, &bist); |
| if (time_after(jiffies, timeout)) |
| break; |
| } while (bist & PCI_BIST_START); |
| if (bist & (PCI_BIST_CODE_MASK | PCI_BIST_START)) |
| printk(KERN_CONT "failed. (0x%x)\n", bist); |
| else |
| printk(KERN_CONT "OK.\n"); |
| } |
| } |
| |
| #ifdef CONFIG_TOSHIBA_FPCIB0 |
| #define PCI_DEVICE_ID_EFAR_SLC90E66_0 0x9460 |
| DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_EFAR, PCI_DEVICE_ID_EFAR_SLC90E66_0, |
| quirk_slc90e66_bridge); |
| DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_EFAR, PCI_DEVICE_ID_EFAR_SLC90E66_1, |
| quirk_slc90e66_ide); |
| DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_EFAR, PCI_DEVICE_ID_EFAR_SLC90E66_1, |
| quirk_slc90e66_ide); |
| #endif |
| DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_TOSHIBA_2, |
| PCI_DEVICE_ID_TOSHIBA_TC35815_NWU, tc35815_fixup); |
| DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_TOSHIBA_2, |
| PCI_DEVICE_ID_TOSHIBA_TC35815_TX4939, tc35815_fixup); |
| DECLARE_PCI_FIXUP_FINAL(PCI_ANY_ID, PCI_ANY_ID, final_fixup); |
| DECLARE_PCI_FIXUP_RESUME(PCI_ANY_ID, PCI_ANY_ID, final_fixup); |
| |
| int pcibios_plat_dev_init(struct pci_dev *dev) |
| { |
| return 0; |
| } |
| |
| int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) |
| { |
| return txx9_board_vec->pci_map_irq(dev, slot, pin); |
| } |
| |
| char * (*txx9_board_pcibios_setup)(char *str) __initdata; |
| |
| char *__init txx9_pcibios_setup(char *str) |
| { |
| if (txx9_board_pcibios_setup && !txx9_board_pcibios_setup(str)) |
| return NULL; |
| if (!strcmp(str, "picmg")) { |
| /* PICMG compliant backplane (TOSHIBA JMB-PICMG-ATX |
| (5V or 3.3V), JMB-PICMG-L2 (5V only), etc.) */ |
| txx9_pci_option |= TXX9_PCI_OPT_PICMG; |
| return NULL; |
| } else if (!strcmp(str, "nopicmg")) { |
| /* non-PICMG compliant backplane (TOSHIBA |
| RBHBK4100,RBHBK4200, Interface PCM-PCM05, etc.) */ |
| txx9_pci_option &= ~TXX9_PCI_OPT_PICMG; |
| return NULL; |
| } else if (!strncmp(str, "clk=", 4)) { |
| char *val = str + 4; |
| txx9_pci_option &= ~TXX9_PCI_OPT_CLK_MASK; |
| if (strcmp(val, "33") == 0) |
| txx9_pci_option |= TXX9_PCI_OPT_CLK_33; |
| else if (strcmp(val, "66") == 0) |
| txx9_pci_option |= TXX9_PCI_OPT_CLK_66; |
| else /* "auto" */ |
| txx9_pci_option |= TXX9_PCI_OPT_CLK_AUTO; |
| return NULL; |
| } else if (!strncmp(str, "err=", 4)) { |
| if (!strcmp(str + 4, "panic")) |
| txx9_pci_err_action = TXX9_PCI_ERR_PANIC; |
| else if (!strcmp(str + 4, "ignore")) |
| txx9_pci_err_action = TXX9_PCI_ERR_IGNORE; |
| return NULL; |
| } |
| return str; |
| } |