| /* |
| * This file is subject to the terms and conditions of the GNU General Public |
| * License. See the file "COPYING" in the main directory of this archive |
| * for more details. |
| * |
| * Copyright (C) 2004-2017 Cavium, Inc. |
| * Copyright (C) 2008 Wind River Systems |
| */ |
| |
| #include <linux/etherdevice.h> |
| #include <linux/of_platform.h> |
| #include <linux/of_fdt.h> |
| #include <linux/libfdt.h> |
| |
| #include <asm/octeon/octeon.h> |
| #include <asm/octeon/cvmx-helper-board.h> |
| |
| #ifdef CONFIG_USB |
| #include <linux/usb/ehci_def.h> |
| #include <linux/usb/ehci_pdriver.h> |
| #include <linux/usb/ohci_pdriver.h> |
| #include <asm/octeon/cvmx-uctlx-defs.h> |
| |
| #define CVMX_UAHCX_EHCI_USBCMD (CVMX_ADD_IO_SEG(0x00016F0000000010ull)) |
| #define CVMX_UAHCX_OHCI_USBCMD (CVMX_ADD_IO_SEG(0x00016F0000000408ull)) |
| |
| static DEFINE_MUTEX(octeon2_usb_clocks_mutex); |
| |
| static int octeon2_usb_clock_start_cnt; |
| |
| static int __init octeon2_usb_reset(void) |
| { |
| union cvmx_uctlx_clk_rst_ctl clk_rst_ctl; |
| u32 ucmd; |
| |
| if (!OCTEON_IS_OCTEON2()) |
| return 0; |
| |
| clk_rst_ctl.u64 = cvmx_read_csr(CVMX_UCTLX_CLK_RST_CTL(0)); |
| if (clk_rst_ctl.s.hrst) { |
| ucmd = cvmx_read64_uint32(CVMX_UAHCX_EHCI_USBCMD); |
| ucmd &= ~CMD_RUN; |
| cvmx_write64_uint32(CVMX_UAHCX_EHCI_USBCMD, ucmd); |
| mdelay(2); |
| ucmd |= CMD_RESET; |
| cvmx_write64_uint32(CVMX_UAHCX_EHCI_USBCMD, ucmd); |
| ucmd = cvmx_read64_uint32(CVMX_UAHCX_OHCI_USBCMD); |
| ucmd |= CMD_RUN; |
| cvmx_write64_uint32(CVMX_UAHCX_OHCI_USBCMD, ucmd); |
| } |
| |
| return 0; |
| } |
| arch_initcall(octeon2_usb_reset); |
| |
| static void octeon2_usb_clocks_start(struct device *dev) |
| { |
| u64 div; |
| union cvmx_uctlx_if_ena if_ena; |
| union cvmx_uctlx_clk_rst_ctl clk_rst_ctl; |
| union cvmx_uctlx_uphy_portx_ctl_status port_ctl_status; |
| int i; |
| unsigned long io_clk_64_to_ns; |
| u32 clock_rate = 12000000; |
| bool is_crystal_clock = false; |
| |
| |
| mutex_lock(&octeon2_usb_clocks_mutex); |
| |
| octeon2_usb_clock_start_cnt++; |
| if (octeon2_usb_clock_start_cnt != 1) |
| goto exit; |
| |
| io_clk_64_to_ns = 64000000000ull / octeon_get_io_clock_rate(); |
| |
| if (dev->of_node) { |
| struct device_node *uctl_node; |
| const char *clock_type; |
| |
| uctl_node = of_get_parent(dev->of_node); |
| if (!uctl_node) { |
| dev_err(dev, "No UCTL device node\n"); |
| goto exit; |
| } |
| i = of_property_read_u32(uctl_node, |
| "refclk-frequency", &clock_rate); |
| if (i) { |
| dev_err(dev, "No UCTL \"refclk-frequency\"\n"); |
| goto exit; |
| } |
| i = of_property_read_string(uctl_node, |
| "refclk-type", &clock_type); |
| |
| if (!i && strcmp("crystal", clock_type) == 0) |
| is_crystal_clock = true; |
| } |
| |
| /* |
| * Step 1: Wait for voltages stable. That surely happened |
| * before starting the kernel. |
| * |
| * Step 2: Enable SCLK of UCTL by writing UCTL0_IF_ENA[EN] = 1 |
| */ |
| if_ena.u64 = 0; |
| if_ena.s.en = 1; |
| cvmx_write_csr(CVMX_UCTLX_IF_ENA(0), if_ena.u64); |
| |
| for (i = 0; i <= 1; i++) { |
| port_ctl_status.u64 = |
| cvmx_read_csr(CVMX_UCTLX_UPHY_PORTX_CTL_STATUS(i, 0)); |
| /* Set txvreftune to 15 to obtain compliant 'eye' diagram. */ |
| port_ctl_status.s.txvreftune = 15; |
| port_ctl_status.s.txrisetune = 1; |
| port_ctl_status.s.txpreemphasistune = 1; |
| cvmx_write_csr(CVMX_UCTLX_UPHY_PORTX_CTL_STATUS(i, 0), |
| port_ctl_status.u64); |
| } |
| |
| /* Step 3: Configure the reference clock, PHY, and HCLK */ |
| clk_rst_ctl.u64 = cvmx_read_csr(CVMX_UCTLX_CLK_RST_CTL(0)); |
| |
| /* |
| * If the UCTL looks like it has already been started, skip |
| * the initialization, otherwise bus errors are obtained. |
| */ |
| if (clk_rst_ctl.s.hrst) |
| goto end_clock; |
| /* 3a */ |
| clk_rst_ctl.s.p_por = 1; |
| clk_rst_ctl.s.hrst = 0; |
| clk_rst_ctl.s.p_prst = 0; |
| clk_rst_ctl.s.h_clkdiv_rst = 0; |
| clk_rst_ctl.s.o_clkdiv_rst = 0; |
| clk_rst_ctl.s.h_clkdiv_en = 0; |
| clk_rst_ctl.s.o_clkdiv_en = 0; |
| cvmx_write_csr(CVMX_UCTLX_CLK_RST_CTL(0), clk_rst_ctl.u64); |
| |
| /* 3b */ |
| clk_rst_ctl.s.p_refclk_sel = is_crystal_clock ? 0 : 1; |
| switch (clock_rate) { |
| default: |
| pr_err("Invalid UCTL clock rate of %u, using 12000000 instead\n", |
| clock_rate); |
| /* Fall through */ |
| case 12000000: |
| clk_rst_ctl.s.p_refclk_div = 0; |
| break; |
| case 24000000: |
| clk_rst_ctl.s.p_refclk_div = 1; |
| break; |
| case 48000000: |
| clk_rst_ctl.s.p_refclk_div = 2; |
| break; |
| } |
| cvmx_write_csr(CVMX_UCTLX_CLK_RST_CTL(0), clk_rst_ctl.u64); |
| |
| /* 3c */ |
| div = octeon_get_io_clock_rate() / 130000000ull; |
| |
| switch (div) { |
| case 0: |
| div = 1; |
| break; |
| case 1: |
| case 2: |
| case 3: |
| case 4: |
| break; |
| case 5: |
| div = 4; |
| break; |
| case 6: |
| case 7: |
| div = 6; |
| break; |
| case 8: |
| case 9: |
| case 10: |
| case 11: |
| div = 8; |
| break; |
| default: |
| div = 12; |
| break; |
| } |
| clk_rst_ctl.s.h_div = div; |
| cvmx_write_csr(CVMX_UCTLX_CLK_RST_CTL(0), clk_rst_ctl.u64); |
| /* Read it back, */ |
| clk_rst_ctl.u64 = cvmx_read_csr(CVMX_UCTLX_CLK_RST_CTL(0)); |
| clk_rst_ctl.s.h_clkdiv_en = 1; |
| cvmx_write_csr(CVMX_UCTLX_CLK_RST_CTL(0), clk_rst_ctl.u64); |
| /* 3d */ |
| clk_rst_ctl.s.h_clkdiv_rst = 1; |
| cvmx_write_csr(CVMX_UCTLX_CLK_RST_CTL(0), clk_rst_ctl.u64); |
| |
| /* 3e: delay 64 io clocks */ |
| ndelay(io_clk_64_to_ns); |
| |
| /* |
| * Step 4: Program the power-on reset field in the UCTL |
| * clock-reset-control register. |
| */ |
| clk_rst_ctl.s.p_por = 0; |
| cvmx_write_csr(CVMX_UCTLX_CLK_RST_CTL(0), clk_rst_ctl.u64); |
| |
| /* Step 5: Wait 3 ms for the PHY clock to start. */ |
| mdelay(3); |
| |
| /* Steps 6..9 for ATE only, are skipped. */ |
| |
| /* Step 10: Configure the OHCI_CLK48 and OHCI_CLK12 clocks. */ |
| /* 10a */ |
| clk_rst_ctl.s.o_clkdiv_rst = 1; |
| cvmx_write_csr(CVMX_UCTLX_CLK_RST_CTL(0), clk_rst_ctl.u64); |
| |
| /* 10b */ |
| clk_rst_ctl.s.o_clkdiv_en = 1; |
| cvmx_write_csr(CVMX_UCTLX_CLK_RST_CTL(0), clk_rst_ctl.u64); |
| |
| /* 10c */ |
| ndelay(io_clk_64_to_ns); |
| |
| /* |
| * Step 11: Program the PHY reset field: |
| * UCTL0_CLK_RST_CTL[P_PRST] = 1 |
| */ |
| clk_rst_ctl.s.p_prst = 1; |
| cvmx_write_csr(CVMX_UCTLX_CLK_RST_CTL(0), clk_rst_ctl.u64); |
| |
| /* Step 11b */ |
| udelay(1); |
| |
| /* Step 11c */ |
| clk_rst_ctl.s.p_prst = 0; |
| cvmx_write_csr(CVMX_UCTLX_CLK_RST_CTL(0), clk_rst_ctl.u64); |
| |
| /* Step 11d */ |
| mdelay(1); |
| |
| /* Step 11e */ |
| clk_rst_ctl.s.p_prst = 1; |
| cvmx_write_csr(CVMX_UCTLX_CLK_RST_CTL(0), clk_rst_ctl.u64); |
| |
| /* Step 12: Wait 1 uS. */ |
| udelay(1); |
| |
| /* Step 13: Program the HRESET_N field: UCTL0_CLK_RST_CTL[HRST] = 1 */ |
| clk_rst_ctl.s.hrst = 1; |
| cvmx_write_csr(CVMX_UCTLX_CLK_RST_CTL(0), clk_rst_ctl.u64); |
| |
| end_clock: |
| /* Set uSOF cycle period to 60,000 bits. */ |
| cvmx_write_csr(CVMX_UCTLX_EHCI_FLA(0), 0x20ull); |
| |
| exit: |
| mutex_unlock(&octeon2_usb_clocks_mutex); |
| } |
| |
| static void octeon2_usb_clocks_stop(void) |
| { |
| mutex_lock(&octeon2_usb_clocks_mutex); |
| octeon2_usb_clock_start_cnt--; |
| mutex_unlock(&octeon2_usb_clocks_mutex); |
| } |
| |
| static int octeon_ehci_power_on(struct platform_device *pdev) |
| { |
| octeon2_usb_clocks_start(&pdev->dev); |
| return 0; |
| } |
| |
| static void octeon_ehci_power_off(struct platform_device *pdev) |
| { |
| octeon2_usb_clocks_stop(); |
| } |
| |
| static struct usb_ehci_pdata octeon_ehci_pdata = { |
| /* Octeon EHCI matches CPU endianness. */ |
| #ifdef __BIG_ENDIAN |
| .big_endian_mmio = 1, |
| #endif |
| /* |
| * We can DMA from anywhere. But the descriptors must be in |
| * the lower 4GB. |
| */ |
| .dma_mask_64 = 0, |
| .power_on = octeon_ehci_power_on, |
| .power_off = octeon_ehci_power_off, |
| }; |
| |
| static void __init octeon_ehci_hw_start(struct device *dev) |
| { |
| union cvmx_uctlx_ehci_ctl ehci_ctl; |
| |
| octeon2_usb_clocks_start(dev); |
| |
| ehci_ctl.u64 = cvmx_read_csr(CVMX_UCTLX_EHCI_CTL(0)); |
| /* Use 64-bit addressing. */ |
| ehci_ctl.s.ehci_64b_addr_en = 1; |
| ehci_ctl.s.l2c_addr_msb = 0; |
| #ifdef __BIG_ENDIAN |
| ehci_ctl.s.l2c_buff_emod = 1; /* Byte swapped. */ |
| ehci_ctl.s.l2c_desc_emod = 1; /* Byte swapped. */ |
| #else |
| ehci_ctl.s.l2c_buff_emod = 0; /* not swapped. */ |
| ehci_ctl.s.l2c_desc_emod = 0; /* not swapped. */ |
| ehci_ctl.s.inv_reg_a2 = 1; |
| #endif |
| cvmx_write_csr(CVMX_UCTLX_EHCI_CTL(0), ehci_ctl.u64); |
| |
| octeon2_usb_clocks_stop(); |
| } |
| |
| static int __init octeon_ehci_device_init(void) |
| { |
| struct platform_device *pd; |
| struct device_node *ehci_node; |
| int ret = 0; |
| |
| ehci_node = of_find_node_by_name(NULL, "ehci"); |
| if (!ehci_node) |
| return 0; |
| |
| pd = of_find_device_by_node(ehci_node); |
| of_node_put(ehci_node); |
| if (!pd) |
| return 0; |
| |
| pd->dev.platform_data = &octeon_ehci_pdata; |
| octeon_ehci_hw_start(&pd->dev); |
| put_device(&pd->dev); |
| |
| return ret; |
| } |
| device_initcall(octeon_ehci_device_init); |
| |
| static int octeon_ohci_power_on(struct platform_device *pdev) |
| { |
| octeon2_usb_clocks_start(&pdev->dev); |
| return 0; |
| } |
| |
| static void octeon_ohci_power_off(struct platform_device *pdev) |
| { |
| octeon2_usb_clocks_stop(); |
| } |
| |
| static struct usb_ohci_pdata octeon_ohci_pdata = { |
| /* Octeon OHCI matches CPU endianness. */ |
| #ifdef __BIG_ENDIAN |
| .big_endian_mmio = 1, |
| #endif |
| .power_on = octeon_ohci_power_on, |
| .power_off = octeon_ohci_power_off, |
| }; |
| |
| static void __init octeon_ohci_hw_start(struct device *dev) |
| { |
| union cvmx_uctlx_ohci_ctl ohci_ctl; |
| |
| octeon2_usb_clocks_start(dev); |
| |
| ohci_ctl.u64 = cvmx_read_csr(CVMX_UCTLX_OHCI_CTL(0)); |
| ohci_ctl.s.l2c_addr_msb = 0; |
| #ifdef __BIG_ENDIAN |
| ohci_ctl.s.l2c_buff_emod = 1; /* Byte swapped. */ |
| ohci_ctl.s.l2c_desc_emod = 1; /* Byte swapped. */ |
| #else |
| ohci_ctl.s.l2c_buff_emod = 0; /* not swapped. */ |
| ohci_ctl.s.l2c_desc_emod = 0; /* not swapped. */ |
| ohci_ctl.s.inv_reg_a2 = 1; |
| #endif |
| cvmx_write_csr(CVMX_UCTLX_OHCI_CTL(0), ohci_ctl.u64); |
| |
| octeon2_usb_clocks_stop(); |
| } |
| |
| static int __init octeon_ohci_device_init(void) |
| { |
| struct platform_device *pd; |
| struct device_node *ohci_node; |
| int ret = 0; |
| |
| ohci_node = of_find_node_by_name(NULL, "ohci"); |
| if (!ohci_node) |
| return 0; |
| |
| pd = of_find_device_by_node(ohci_node); |
| of_node_put(ohci_node); |
| if (!pd) |
| return 0; |
| |
| pd->dev.platform_data = &octeon_ohci_pdata; |
| octeon_ohci_hw_start(&pd->dev); |
| put_device(&pd->dev); |
| |
| return ret; |
| } |
| device_initcall(octeon_ohci_device_init); |
| |
| #endif /* CONFIG_USB */ |
| |
| /* Octeon Random Number Generator. */ |
| static int __init octeon_rng_device_init(void) |
| { |
| struct platform_device *pd; |
| int ret = 0; |
| |
| struct resource rng_resources[] = { |
| { |
| .flags = IORESOURCE_MEM, |
| .start = XKPHYS_TO_PHYS(CVMX_RNM_CTL_STATUS), |
| .end = XKPHYS_TO_PHYS(CVMX_RNM_CTL_STATUS) + 0xf |
| }, { |
| .flags = IORESOURCE_MEM, |
| .start = cvmx_build_io_address(8, 0), |
| .end = cvmx_build_io_address(8, 0) + 0x7 |
| } |
| }; |
| |
| pd = platform_device_alloc("octeon_rng", -1); |
| if (!pd) { |
| ret = -ENOMEM; |
| goto out; |
| } |
| |
| ret = platform_device_add_resources(pd, rng_resources, |
| ARRAY_SIZE(rng_resources)); |
| if (ret) |
| goto fail; |
| |
| ret = platform_device_add(pd); |
| if (ret) |
| goto fail; |
| |
| return ret; |
| fail: |
| platform_device_put(pd); |
| |
| out: |
| return ret; |
| } |
| device_initcall(octeon_rng_device_init); |
| |
| const struct of_device_id octeon_ids[] __initconst = { |
| { .compatible = "simple-bus", }, |
| { .compatible = "cavium,octeon-6335-uctl", }, |
| { .compatible = "cavium,octeon-5750-usbn", }, |
| { .compatible = "cavium,octeon-3860-bootbus", }, |
| { .compatible = "cavium,mdio-mux", }, |
| { .compatible = "gpio-leds", }, |
| { .compatible = "cavium,octeon-7130-usb-uctl", }, |
| {}, |
| }; |
| |
| static bool __init octeon_has_88e1145(void) |
| { |
| return !OCTEON_IS_MODEL(OCTEON_CN52XX) && |
| !OCTEON_IS_MODEL(OCTEON_CN6XXX) && |
| !OCTEON_IS_MODEL(OCTEON_CN56XX); |
| } |
| |
| static void __init octeon_fdt_set_phy(int eth, int phy_addr) |
| { |
| const __be32 *phy_handle; |
| const __be32 *alt_phy_handle; |
| const __be32 *reg; |
| u32 phandle; |
| int phy; |
| int alt_phy; |
| const char *p; |
| int current_len; |
| char new_name[20]; |
| |
| phy_handle = fdt_getprop(initial_boot_params, eth, "phy-handle", NULL); |
| if (!phy_handle) |
| return; |
| |
| phandle = be32_to_cpup(phy_handle); |
| phy = fdt_node_offset_by_phandle(initial_boot_params, phandle); |
| |
| alt_phy_handle = fdt_getprop(initial_boot_params, eth, "cavium,alt-phy-handle", NULL); |
| if (alt_phy_handle) { |
| u32 alt_phandle = be32_to_cpup(alt_phy_handle); |
| |
| alt_phy = fdt_node_offset_by_phandle(initial_boot_params, alt_phandle); |
| } else { |
| alt_phy = -1; |
| } |
| |
| if (phy_addr < 0 || phy < 0) { |
| /* Delete the PHY things */ |
| fdt_nop_property(initial_boot_params, eth, "phy-handle"); |
| /* This one may fail */ |
| fdt_nop_property(initial_boot_params, eth, "cavium,alt-phy-handle"); |
| if (phy >= 0) |
| fdt_nop_node(initial_boot_params, phy); |
| if (alt_phy >= 0) |
| fdt_nop_node(initial_boot_params, alt_phy); |
| return; |
| } |
| |
| if (phy_addr >= 256 && alt_phy > 0) { |
| const struct fdt_property *phy_prop; |
| struct fdt_property *alt_prop; |
| fdt32_t phy_handle_name; |
| |
| /* Use the alt phy node instead.*/ |
| phy_prop = fdt_get_property(initial_boot_params, eth, "phy-handle", NULL); |
| phy_handle_name = phy_prop->nameoff; |
| fdt_nop_node(initial_boot_params, phy); |
| fdt_nop_property(initial_boot_params, eth, "phy-handle"); |
| alt_prop = fdt_get_property_w(initial_boot_params, eth, "cavium,alt-phy-handle", NULL); |
| alt_prop->nameoff = phy_handle_name; |
| phy = alt_phy; |
| } |
| |
| phy_addr &= 0xff; |
| |
| if (octeon_has_88e1145()) { |
| fdt_nop_property(initial_boot_params, phy, "marvell,reg-init"); |
| memset(new_name, 0, sizeof(new_name)); |
| strcpy(new_name, "marvell,88e1145"); |
| p = fdt_getprop(initial_boot_params, phy, "compatible", |
| ¤t_len); |
| if (p && current_len >= strlen(new_name)) |
| fdt_setprop_inplace(initial_boot_params, phy, |
| "compatible", new_name, current_len); |
| } |
| |
| reg = fdt_getprop(initial_boot_params, phy, "reg", NULL); |
| if (phy_addr == be32_to_cpup(reg)) |
| return; |
| |
| fdt_setprop_inplace_cell(initial_boot_params, phy, "reg", phy_addr); |
| |
| snprintf(new_name, sizeof(new_name), "ethernet-phy@%x", phy_addr); |
| |
| p = fdt_get_name(initial_boot_params, phy, ¤t_len); |
| if (p && current_len == strlen(new_name)) |
| fdt_set_name(initial_boot_params, phy, new_name); |
| else |
| pr_err("Error: could not rename ethernet phy: <%s>", p); |
| } |
| |
| static void __init octeon_fdt_set_mac_addr(int n, u64 *pmac) |
| { |
| const u8 *old_mac; |
| int old_len; |
| u8 new_mac[6]; |
| u64 mac = *pmac; |
| int r; |
| |
| old_mac = fdt_getprop(initial_boot_params, n, "local-mac-address", |
| &old_len); |
| if (!old_mac || old_len != 6 || is_valid_ether_addr(old_mac)) |
| return; |
| |
| new_mac[0] = (mac >> 40) & 0xff; |
| new_mac[1] = (mac >> 32) & 0xff; |
| new_mac[2] = (mac >> 24) & 0xff; |
| new_mac[3] = (mac >> 16) & 0xff; |
| new_mac[4] = (mac >> 8) & 0xff; |
| new_mac[5] = mac & 0xff; |
| |
| r = fdt_setprop_inplace(initial_boot_params, n, "local-mac-address", |
| new_mac, sizeof(new_mac)); |
| |
| if (r) { |
| pr_err("Setting \"local-mac-address\" failed %d", r); |
| return; |
| } |
| *pmac = mac + 1; |
| } |
| |
| static void __init octeon_fdt_rm_ethernet(int node) |
| { |
| const __be32 *phy_handle; |
| |
| phy_handle = fdt_getprop(initial_boot_params, node, "phy-handle", NULL); |
| if (phy_handle) { |
| u32 ph = be32_to_cpup(phy_handle); |
| int p = fdt_node_offset_by_phandle(initial_boot_params, ph); |
| |
| if (p >= 0) |
| fdt_nop_node(initial_boot_params, p); |
| } |
| fdt_nop_node(initial_boot_params, node); |
| } |
| |
| static void __init octeon_fdt_pip_port(int iface, int i, int p, int max) |
| { |
| char name_buffer[20]; |
| int eth; |
| int phy_addr; |
| int ipd_port; |
| |
| snprintf(name_buffer, sizeof(name_buffer), "ethernet@%x", p); |
| eth = fdt_subnode_offset(initial_boot_params, iface, name_buffer); |
| if (eth < 0) |
| return; |
| if (p > max) { |
| pr_debug("Deleting port %x:%x\n", i, p); |
| octeon_fdt_rm_ethernet(eth); |
| return; |
| } |
| if (OCTEON_IS_MODEL(OCTEON_CN68XX)) |
| ipd_port = (0x100 * i) + (0x10 * p) + 0x800; |
| else |
| ipd_port = 16 * i + p; |
| |
| phy_addr = cvmx_helper_board_get_mii_address(ipd_port); |
| octeon_fdt_set_phy(eth, phy_addr); |
| } |
| |
| static void __init octeon_fdt_pip_iface(int pip, int idx) |
| { |
| char name_buffer[20]; |
| int iface; |
| int p; |
| int count = 0; |
| |
| snprintf(name_buffer, sizeof(name_buffer), "interface@%d", idx); |
| iface = fdt_subnode_offset(initial_boot_params, pip, name_buffer); |
| if (iface < 0) |
| return; |
| |
| if (cvmx_helper_interface_enumerate(idx) == 0) |
| count = cvmx_helper_ports_on_interface(idx); |
| |
| for (p = 0; p < 16; p++) |
| octeon_fdt_pip_port(iface, idx, p, count - 1); |
| } |
| |
| void __init octeon_fill_mac_addresses(void) |
| { |
| const char *alias_prop; |
| char name_buffer[20]; |
| u64 mac_addr_base; |
| int aliases; |
| int pip; |
| int i; |
| |
| aliases = fdt_path_offset(initial_boot_params, "/aliases"); |
| if (aliases < 0) |
| return; |
| |
| mac_addr_base = |
| ((octeon_bootinfo->mac_addr_base[0] & 0xffull)) << 40 | |
| ((octeon_bootinfo->mac_addr_base[1] & 0xffull)) << 32 | |
| ((octeon_bootinfo->mac_addr_base[2] & 0xffull)) << 24 | |
| ((octeon_bootinfo->mac_addr_base[3] & 0xffull)) << 16 | |
| ((octeon_bootinfo->mac_addr_base[4] & 0xffull)) << 8 | |
| (octeon_bootinfo->mac_addr_base[5] & 0xffull); |
| |
| for (i = 0; i < 2; i++) { |
| int mgmt; |
| |
| snprintf(name_buffer, sizeof(name_buffer), "mix%d", i); |
| alias_prop = fdt_getprop(initial_boot_params, aliases, |
| name_buffer, NULL); |
| if (!alias_prop) |
| continue; |
| mgmt = fdt_path_offset(initial_boot_params, alias_prop); |
| if (mgmt < 0) |
| continue; |
| octeon_fdt_set_mac_addr(mgmt, &mac_addr_base); |
| } |
| |
| alias_prop = fdt_getprop(initial_boot_params, aliases, "pip", NULL); |
| if (!alias_prop) |
| return; |
| |
| pip = fdt_path_offset(initial_boot_params, alias_prop); |
| if (pip < 0) |
| return; |
| |
| for (i = 0; i <= 4; i++) { |
| int iface; |
| int p; |
| |
| snprintf(name_buffer, sizeof(name_buffer), "interface@%d", i); |
| iface = fdt_subnode_offset(initial_boot_params, pip, |
| name_buffer); |
| if (iface < 0) |
| continue; |
| for (p = 0; p < 16; p++) { |
| int eth; |
| |
| snprintf(name_buffer, sizeof(name_buffer), |
| "ethernet@%x", p); |
| eth = fdt_subnode_offset(initial_boot_params, iface, |
| name_buffer); |
| if (eth < 0) |
| continue; |
| octeon_fdt_set_mac_addr(eth, &mac_addr_base); |
| } |
| } |
| } |
| |
| int __init octeon_prune_device_tree(void) |
| { |
| int i, max_port, uart_mask; |
| const char *pip_path; |
| const char *alias_prop; |
| char name_buffer[20]; |
| int aliases; |
| |
| if (fdt_check_header(initial_boot_params)) |
| panic("Corrupt Device Tree."); |
| |
| WARN(octeon_bootinfo->board_type == CVMX_BOARD_TYPE_CUST_DSR1000N, |
| "Built-in DTB booting is deprecated on %s. Please switch to use appended DTB.", |
| cvmx_board_type_to_string(octeon_bootinfo->board_type)); |
| |
| aliases = fdt_path_offset(initial_boot_params, "/aliases"); |
| if (aliases < 0) { |
| pr_err("Error: No /aliases node in device tree."); |
| return -EINVAL; |
| } |
| |
| if (OCTEON_IS_MODEL(OCTEON_CN52XX) || OCTEON_IS_MODEL(OCTEON_CN63XX)) |
| max_port = 2; |
| else if (OCTEON_IS_MODEL(OCTEON_CN56XX) || OCTEON_IS_MODEL(OCTEON_CN68XX)) |
| max_port = 1; |
| else |
| max_port = 0; |
| |
| if (octeon_bootinfo->board_type == CVMX_BOARD_TYPE_NIC10E) |
| max_port = 0; |
| |
| for (i = 0; i < 2; i++) { |
| int mgmt; |
| |
| snprintf(name_buffer, sizeof(name_buffer), |
| "mix%d", i); |
| alias_prop = fdt_getprop(initial_boot_params, aliases, |
| name_buffer, NULL); |
| if (alias_prop) { |
| mgmt = fdt_path_offset(initial_boot_params, alias_prop); |
| if (mgmt < 0) |
| continue; |
| if (i >= max_port) { |
| pr_debug("Deleting mix%d\n", i); |
| octeon_fdt_rm_ethernet(mgmt); |
| fdt_nop_property(initial_boot_params, aliases, |
| name_buffer); |
| } else { |
| int phy_addr = cvmx_helper_board_get_mii_address(CVMX_HELPER_BOARD_MGMT_IPD_PORT + i); |
| |
| octeon_fdt_set_phy(mgmt, phy_addr); |
| } |
| } |
| } |
| |
| pip_path = fdt_getprop(initial_boot_params, aliases, "pip", NULL); |
| if (pip_path) { |
| int pip = fdt_path_offset(initial_boot_params, pip_path); |
| |
| if (pip >= 0) |
| for (i = 0; i <= 4; i++) |
| octeon_fdt_pip_iface(pip, i); |
| } |
| |
| /* I2C */ |
| if (OCTEON_IS_MODEL(OCTEON_CN52XX) || |
| OCTEON_IS_MODEL(OCTEON_CN63XX) || |
| OCTEON_IS_MODEL(OCTEON_CN68XX) || |
| OCTEON_IS_MODEL(OCTEON_CN56XX)) |
| max_port = 2; |
| else |
| max_port = 1; |
| |
| for (i = 0; i < 2; i++) { |
| int i2c; |
| |
| snprintf(name_buffer, sizeof(name_buffer), |
| "twsi%d", i); |
| alias_prop = fdt_getprop(initial_boot_params, aliases, |
| name_buffer, NULL); |
| |
| if (alias_prop) { |
| i2c = fdt_path_offset(initial_boot_params, alias_prop); |
| if (i2c < 0) |
| continue; |
| if (i >= max_port) { |
| pr_debug("Deleting twsi%d\n", i); |
| fdt_nop_node(initial_boot_params, i2c); |
| fdt_nop_property(initial_boot_params, aliases, |
| name_buffer); |
| } |
| } |
| } |
| |
| /* SMI/MDIO */ |
| if (OCTEON_IS_MODEL(OCTEON_CN68XX)) |
| max_port = 4; |
| else if (OCTEON_IS_MODEL(OCTEON_CN52XX) || |
| OCTEON_IS_MODEL(OCTEON_CN63XX) || |
| OCTEON_IS_MODEL(OCTEON_CN56XX)) |
| max_port = 2; |
| else |
| max_port = 1; |
| |
| for (i = 0; i < 2; i++) { |
| int i2c; |
| |
| snprintf(name_buffer, sizeof(name_buffer), |
| "smi%d", i); |
| alias_prop = fdt_getprop(initial_boot_params, aliases, |
| name_buffer, NULL); |
| if (alias_prop) { |
| i2c = fdt_path_offset(initial_boot_params, alias_prop); |
| if (i2c < 0) |
| continue; |
| if (i >= max_port) { |
| pr_debug("Deleting smi%d\n", i); |
| fdt_nop_node(initial_boot_params, i2c); |
| fdt_nop_property(initial_boot_params, aliases, |
| name_buffer); |
| } |
| } |
| } |
| |
| /* Serial */ |
| uart_mask = 3; |
| |
| /* Right now CN52XX is the only chip with a third uart */ |
| if (OCTEON_IS_MODEL(OCTEON_CN52XX)) |
| uart_mask |= 4; /* uart2 */ |
| |
| for (i = 0; i < 3; i++) { |
| int uart; |
| |
| snprintf(name_buffer, sizeof(name_buffer), |
| "uart%d", i); |
| alias_prop = fdt_getprop(initial_boot_params, aliases, |
| name_buffer, NULL); |
| |
| if (alias_prop) { |
| uart = fdt_path_offset(initial_boot_params, alias_prop); |
| if (uart_mask & (1 << i)) { |
| __be32 f; |
| |
| f = cpu_to_be32(octeon_get_io_clock_rate()); |
| fdt_setprop_inplace(initial_boot_params, |
| uart, "clock-frequency", |
| &f, sizeof(f)); |
| continue; |
| } |
| pr_debug("Deleting uart%d\n", i); |
| fdt_nop_node(initial_boot_params, uart); |
| fdt_nop_property(initial_boot_params, aliases, |
| name_buffer); |
| } |
| } |
| |
| /* Compact Flash */ |
| alias_prop = fdt_getprop(initial_boot_params, aliases, |
| "cf0", NULL); |
| if (alias_prop) { |
| union cvmx_mio_boot_reg_cfgx mio_boot_reg_cfg; |
| unsigned long base_ptr, region_base, region_size; |
| unsigned long region1_base = 0; |
| unsigned long region1_size = 0; |
| int cs, bootbus; |
| bool is_16bit = false; |
| bool is_true_ide = false; |
| __be32 new_reg[6]; |
| __be32 *ranges; |
| int len; |
| |
| int cf = fdt_path_offset(initial_boot_params, alias_prop); |
| |
| base_ptr = 0; |
| if (octeon_bootinfo->major_version == 1 |
| && octeon_bootinfo->minor_version >= 1) { |
| if (octeon_bootinfo->compact_flash_common_base_addr) |
| base_ptr = octeon_bootinfo->compact_flash_common_base_addr; |
| } else { |
| base_ptr = 0x1d000800; |
| } |
| |
| if (!base_ptr) |
| goto no_cf; |
| |
| /* Find CS0 region. */ |
| for (cs = 0; cs < 8; cs++) { |
| mio_boot_reg_cfg.u64 = cvmx_read_csr(CVMX_MIO_BOOT_REG_CFGX(cs)); |
| region_base = mio_boot_reg_cfg.s.base << 16; |
| region_size = (mio_boot_reg_cfg.s.size + 1) << 16; |
| if (mio_boot_reg_cfg.s.en && base_ptr >= region_base |
| && base_ptr < region_base + region_size) { |
| is_16bit = mio_boot_reg_cfg.s.width; |
| break; |
| } |
| } |
| if (cs >= 7) { |
| /* cs and cs + 1 are CS0 and CS1, both must be less than 8. */ |
| goto no_cf; |
| } |
| |
| if (!(base_ptr & 0xfffful)) { |
| /* |
| * Boot loader signals availability of DMA (true_ide |
| * mode) by setting low order bits of base_ptr to |
| * zero. |
| */ |
| |
| /* Asume that CS1 immediately follows. */ |
| mio_boot_reg_cfg.u64 = |
| cvmx_read_csr(CVMX_MIO_BOOT_REG_CFGX(cs + 1)); |
| region1_base = mio_boot_reg_cfg.s.base << 16; |
| region1_size = (mio_boot_reg_cfg.s.size + 1) << 16; |
| if (!mio_boot_reg_cfg.s.en) |
| goto no_cf; |
| is_true_ide = true; |
| |
| } else { |
| fdt_nop_property(initial_boot_params, cf, "cavium,true-ide"); |
| fdt_nop_property(initial_boot_params, cf, "cavium,dma-engine-handle"); |
| if (!is_16bit) { |
| __be32 width = cpu_to_be32(8); |
| |
| fdt_setprop_inplace(initial_boot_params, cf, |
| "cavium,bus-width", &width, sizeof(width)); |
| } |
| } |
| new_reg[0] = cpu_to_be32(cs); |
| new_reg[1] = cpu_to_be32(0); |
| new_reg[2] = cpu_to_be32(0x10000); |
| new_reg[3] = cpu_to_be32(cs + 1); |
| new_reg[4] = cpu_to_be32(0); |
| new_reg[5] = cpu_to_be32(0x10000); |
| fdt_setprop_inplace(initial_boot_params, cf, |
| "reg", new_reg, sizeof(new_reg)); |
| |
| bootbus = fdt_parent_offset(initial_boot_params, cf); |
| if (bootbus < 0) |
| goto no_cf; |
| ranges = fdt_getprop_w(initial_boot_params, bootbus, "ranges", &len); |
| if (!ranges || len < (5 * 8 * sizeof(__be32))) |
| goto no_cf; |
| |
| ranges[(cs * 5) + 2] = cpu_to_be32(region_base >> 32); |
| ranges[(cs * 5) + 3] = cpu_to_be32(region_base & 0xffffffff); |
| ranges[(cs * 5) + 4] = cpu_to_be32(region_size); |
| if (is_true_ide) { |
| cs++; |
| ranges[(cs * 5) + 2] = cpu_to_be32(region1_base >> 32); |
| ranges[(cs * 5) + 3] = cpu_to_be32(region1_base & 0xffffffff); |
| ranges[(cs * 5) + 4] = cpu_to_be32(region1_size); |
| } |
| goto end_cf; |
| no_cf: |
| fdt_nop_node(initial_boot_params, cf); |
| |
| end_cf: |
| ; |
| } |
| |
| /* 8 char LED */ |
| alias_prop = fdt_getprop(initial_boot_params, aliases, |
| "led0", NULL); |
| if (alias_prop) { |
| union cvmx_mio_boot_reg_cfgx mio_boot_reg_cfg; |
| unsigned long base_ptr, region_base, region_size; |
| int cs, bootbus; |
| __be32 new_reg[6]; |
| __be32 *ranges; |
| int len; |
| int led = fdt_path_offset(initial_boot_params, alias_prop); |
| |
| base_ptr = octeon_bootinfo->led_display_base_addr; |
| if (base_ptr == 0) |
| goto no_led; |
| /* Find CS0 region. */ |
| for (cs = 0; cs < 8; cs++) { |
| mio_boot_reg_cfg.u64 = cvmx_read_csr(CVMX_MIO_BOOT_REG_CFGX(cs)); |
| region_base = mio_boot_reg_cfg.s.base << 16; |
| region_size = (mio_boot_reg_cfg.s.size + 1) << 16; |
| if (mio_boot_reg_cfg.s.en && base_ptr >= region_base |
| && base_ptr < region_base + region_size) |
| break; |
| } |
| |
| if (cs > 7) |
| goto no_led; |
| |
| new_reg[0] = cpu_to_be32(cs); |
| new_reg[1] = cpu_to_be32(0x20); |
| new_reg[2] = cpu_to_be32(0x20); |
| new_reg[3] = cpu_to_be32(cs); |
| new_reg[4] = cpu_to_be32(0); |
| new_reg[5] = cpu_to_be32(0x20); |
| fdt_setprop_inplace(initial_boot_params, led, |
| "reg", new_reg, sizeof(new_reg)); |
| |
| bootbus = fdt_parent_offset(initial_boot_params, led); |
| if (bootbus < 0) |
| goto no_led; |
| ranges = fdt_getprop_w(initial_boot_params, bootbus, "ranges", &len); |
| if (!ranges || len < (5 * 8 * sizeof(__be32))) |
| goto no_led; |
| |
| ranges[(cs * 5) + 2] = cpu_to_be32(region_base >> 32); |
| ranges[(cs * 5) + 3] = cpu_to_be32(region_base & 0xffffffff); |
| ranges[(cs * 5) + 4] = cpu_to_be32(region_size); |
| goto end_led; |
| |
| no_led: |
| fdt_nop_node(initial_boot_params, led); |
| end_led: |
| ; |
| } |
| |
| #ifdef CONFIG_USB |
| /* OHCI/UHCI USB */ |
| alias_prop = fdt_getprop(initial_boot_params, aliases, |
| "uctl", NULL); |
| if (alias_prop) { |
| int uctl = fdt_path_offset(initial_boot_params, alias_prop); |
| |
| if (uctl >= 0 && (!OCTEON_IS_MODEL(OCTEON_CN6XXX) || |
| octeon_bootinfo->board_type == CVMX_BOARD_TYPE_NIC2E)) { |
| pr_debug("Deleting uctl\n"); |
| fdt_nop_node(initial_boot_params, uctl); |
| fdt_nop_property(initial_boot_params, aliases, "uctl"); |
| } else if (octeon_bootinfo->board_type == CVMX_BOARD_TYPE_NIC10E || |
| octeon_bootinfo->board_type == CVMX_BOARD_TYPE_NIC4E) { |
| /* Missing "refclk-type" defaults to crystal. */ |
| fdt_nop_property(initial_boot_params, uctl, "refclk-type"); |
| } |
| } |
| |
| /* DWC2 USB */ |
| alias_prop = fdt_getprop(initial_boot_params, aliases, |
| "usbn", NULL); |
| if (alias_prop) { |
| int usbn = fdt_path_offset(initial_boot_params, alias_prop); |
| |
| if (usbn >= 0 && (current_cpu_type() == CPU_CAVIUM_OCTEON2 || |
| !octeon_has_feature(OCTEON_FEATURE_USB))) { |
| pr_debug("Deleting usbn\n"); |
| fdt_nop_node(initial_boot_params, usbn); |
| fdt_nop_property(initial_boot_params, aliases, "usbn"); |
| } else { |
| __be32 new_f[1]; |
| enum cvmx_helper_board_usb_clock_types c; |
| |
| c = __cvmx_helper_board_usb_get_clock_type(); |
| switch (c) { |
| case USB_CLOCK_TYPE_REF_48: |
| new_f[0] = cpu_to_be32(48000000); |
| fdt_setprop_inplace(initial_boot_params, usbn, |
| "refclk-frequency", new_f, sizeof(new_f)); |
| /* Fall through ...*/ |
| case USB_CLOCK_TYPE_REF_12: |
| /* Missing "refclk-type" defaults to external. */ |
| fdt_nop_property(initial_boot_params, usbn, "refclk-type"); |
| break; |
| default: |
| break; |
| } |
| } |
| } |
| #endif |
| |
| return 0; |
| } |
| |
| static int __init octeon_publish_devices(void) |
| { |
| return of_platform_bus_probe(NULL, octeon_ids, NULL); |
| } |
| arch_initcall(octeon_publish_devices); |