drivers/net/wireless/brcm80211/brcmsmac/aiutils.c - LeafOS-Devices/android_kernel_samsung_gta4xl - Gitiles

 /*
  * Copyright (c) 2010 Broadcom Corporation
  *
  * Permission to use, copy, modify, and/or distribute this software for any
  * purpose with or without fee is hereby granted, provided that the above
  * copyright notice and this permission notice appear in all copies.
  *
  * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
  * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
  * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
  * SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
  * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION
  * OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN
  * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
  *
  * File contents: support functions for PCI/PCIe
  */

 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt

 #include <linux/delay.h>

 #include <defs.h>
 #include <chipcommon.h>
 #include <brcmu_utils.h>
 #include <brcm_hw_ids.h>
 #include <soc.h>
 #include "types.h"
 #include "pub.h"
 #include "pmu.h"
 #include "aiutils.h"

 /* slow_clk_ctl */
  /* slow clock source mask */
 #define SCC_SS_MASK		0x00000007
  /* source of slow clock is LPO */
 #define	SCC_SS_LPO		0x00000000
  /* source of slow clock is crystal */
 #define	SCC_SS_XTAL		0x00000001
  /* source of slow clock is PCI */
 #define	SCC_SS_PCI		0x00000002
  /* LPOFreqSel, 1: 160Khz, 0: 32KHz */
 #define SCC_LF			0x00000200
  /* LPOPowerDown, 1: LPO is disabled, 0: LPO is enabled */
 #define SCC_LP			0x00000400
  /* ForceSlowClk, 1: sb/cores running on slow clock, 0: power logic control */
 #define SCC_FS			0x00000800
  /* IgnorePllOffReq, 1/0:
   *  power logic ignores/honors PLL clock disable requests from core
   */
 #define SCC_IP			0x00001000
  /* XtalControlEn, 1/0:
   *  power logic does/doesn't disable crystal when appropriate
   */
 #define SCC_XC			0x00002000
  /* XtalPU (RO), 1/0: crystal running/disabled */
 #define SCC_XP			0x00004000
  /* ClockDivider (SlowClk = 1/(4+divisor)) */
 #define SCC_CD_MASK		0xffff0000
 #define SCC_CD_SHIFT		16

 /* system_clk_ctl */
  /* ILPen: Enable Idle Low Power */
 #define	SYCC_IE			0x00000001
  /* ALPen: Enable Active Low Power */
 #define	SYCC_AE			0x00000002
  /* ForcePLLOn */
 #define	SYCC_FP			0x00000004
  /* Force ALP (or HT if ALPen is not set */
 #define	SYCC_AR			0x00000008
  /* Force HT */
 #define	SYCC_HR			0x00000010
  /* ClkDiv  (ILP = 1/(4 * (divisor + 1)) */
 #define SYCC_CD_MASK		0xffff0000
 #define SYCC_CD_SHIFT		16

 #define CST4329_SPROM_OTP_SEL_MASK	0x00000003
  /* OTP is powered up, use def. CIS, no SPROM */
 #define CST4329_DEFCIS_SEL		0
  /* OTP is powered up, SPROM is present */
 #define CST4329_SPROM_SEL		1
  /* OTP is powered up, no SPROM */
 #define CST4329_OTP_SEL			2
  /* OTP is powered down, SPROM is present */
 #define CST4329_OTP_PWRDN		3

 #define CST4329_SPI_SDIO_MODE_MASK	0x00000004
 #define CST4329_SPI_SDIO_MODE_SHIFT	2

 /* 43224 chip-specific ChipControl register bits */
 #define CCTRL43224_GPIO_TOGGLE          0x8000
  /* 12 mA drive strength */
 #define CCTRL_43224A0_12MA_LED_DRIVE    0x00F000F0
  /* 12 mA drive strength for later 43224s */
 #define CCTRL_43224B0_12MA_LED_DRIVE    0xF0

 /* 43236 Chip specific ChipStatus register bits */
 #define CST43236_SFLASH_MASK		0x00000040
 #define CST43236_OTP_MASK		0x00000080
 #define CST43236_HSIC_MASK		0x00000100	/* USB/HSIC */
 #define CST43236_BP_CLK			0x00000200	/* 120/96Mbps */
 #define CST43236_BOOT_MASK		0x00001800
 #define CST43236_BOOT_SHIFT		11
 #define CST43236_BOOT_FROM_SRAM		0 /* boot from SRAM, ARM in reset */
 #define CST43236_BOOT_FROM_ROM		1 /* boot from ROM */
 #define CST43236_BOOT_FROM_FLASH	2 /* boot from FLASH */
 #define CST43236_BOOT_FROM_INVALID	3

 /* 4331 chip-specific ChipControl register bits */
  /* 0 disable */
 #define CCTRL4331_BT_COEXIST		(1<<0)
  /* 0 SECI is disabled (JTAG functional) */
 #define CCTRL4331_SECI			(1<<1)
  /* 0 disable */
 #define CCTRL4331_EXT_LNA		(1<<2)
  /* sprom/gpio13-15 mux */
 #define CCTRL4331_SPROM_GPIO13_15       (1<<3)
  /* 0 ext pa disable, 1 ext pa enabled */
 #define CCTRL4331_EXTPA_EN		(1<<4)
  /* set drive out GPIO_CLK on sprom_cs pin */
 #define CCTRL4331_GPIOCLK_ON_SPROMCS	(1<<5)
  /* use sprom_cs pin as PCIE mdio interface */
 #define CCTRL4331_PCIE_MDIO_ON_SPROMCS	(1<<6)
  /* aband extpa will be at gpio2/5 and sprom_dout */
 #define CCTRL4331_EXTPA_ON_GPIO2_5	(1<<7)
  /* override core control on pipe_AuxClkEnable */
 #define CCTRL4331_OVR_PIPEAUXCLKEN	(1<<8)
  /* override core control on pipe_AuxPowerDown */
 #define CCTRL4331_OVR_PIPEAUXPWRDOWN	(1<<9)
  /* pcie_auxclkenable */
 #define CCTRL4331_PCIE_AUXCLKEN		(1<<10)
  /* pcie_pipe_pllpowerdown */
 #define CCTRL4331_PCIE_PIPE_PLLDOWN	(1<<11)
  /* enable bt_shd0 at gpio4 */
 #define CCTRL4331_BT_SHD0_ON_GPIO4	(1<<16)
  /* enable bt_shd1 at gpio5 */
 #define CCTRL4331_BT_SHD1_ON_GPIO5	(1<<17)

 /* 4331 Chip specific ChipStatus register bits */
  /* crystal frequency 20/40Mhz */
 #define	CST4331_XTAL_FREQ		0x00000001
 #define	CST4331_SPROM_PRESENT		0x00000002
 #define	CST4331_OTP_PRESENT		0x00000004
 #define	CST4331_LDO_RF			0x00000008
 #define	CST4331_LDO_PAR			0x00000010

 /* 4319 chip-specific ChipStatus register bits */
 #define	CST4319_SPI_CPULESSUSB		0x00000001
 #define	CST4319_SPI_CLK_POL		0x00000002
 #define	CST4319_SPI_CLK_PH		0x00000008
  /* gpio [7:6], SDIO CIS selection */
 #define	CST4319_SPROM_OTP_SEL_MASK	0x000000c0
 #define	CST4319_SPROM_OTP_SEL_SHIFT	6
  /* use default CIS, OTP is powered up */
 #define	CST4319_DEFCIS_SEL		0x00000000
  /* use SPROM, OTP is powered up */
 #define	CST4319_SPROM_SEL		0x00000040
  /* use OTP, OTP is powered up */
 #define	CST4319_OTP_SEL			0x00000080
  /* use SPROM, OTP is powered down */
 #define	CST4319_OTP_PWRDN		0x000000c0
  /* gpio [8], sdio/usb mode */
 #define	CST4319_SDIO_USB_MODE		0x00000100
 #define	CST4319_REMAP_SEL_MASK		0x00000600
 #define	CST4319_ILPDIV_EN		0x00000800
 #define	CST4319_XTAL_PD_POL		0x00001000
 #define	CST4319_LPO_SEL			0x00002000
 #define	CST4319_RES_INIT_MODE		0x0000c000
  /* PALDO is configured with external PNP */
 #define	CST4319_PALDO_EXTPNP		0x00010000
 #define	CST4319_CBUCK_MODE_MASK		0x00060000
 #define CST4319_CBUCK_MODE_BURST	0x00020000
 #define CST4319_CBUCK_MODE_LPBURST	0x00060000
 #define	CST4319_RCAL_VALID		0x01000000
 #define	CST4319_RCAL_VALUE_MASK		0x3e000000
 #define	CST4319_RCAL_VALUE_SHIFT	25

 /* 4336 chip-specific ChipStatus register bits */
 #define	CST4336_SPI_MODE_MASK		0x00000001
 #define	CST4336_SPROM_PRESENT		0x00000002
 #define	CST4336_OTP_PRESENT		0x00000004
 #define	CST4336_ARMREMAP_0		0x00000008
 #define	CST4336_ILPDIV_EN_MASK		0x00000010
 #define	CST4336_ILPDIV_EN_SHIFT		4
 #define	CST4336_XTAL_PD_POL_MASK	0x00000020
 #define	CST4336_XTAL_PD_POL_SHIFT	5
 #define	CST4336_LPO_SEL_MASK		0x00000040
 #define	CST4336_LPO_SEL_SHIFT		6
 #define	CST4336_RES_INIT_MODE_MASK	0x00000180
 #define	CST4336_RES_INIT_MODE_SHIFT	7
 #define	CST4336_CBUCK_MODE_MASK		0x00000600
 #define	CST4336_CBUCK_MODE_SHIFT	9

 /* 4313 chip-specific ChipStatus register bits */
 #define	CST4313_SPROM_PRESENT			1
 #define	CST4313_OTP_PRESENT			2
 #define	CST4313_SPROM_OTP_SEL_MASK		0x00000002
 #define	CST4313_SPROM_OTP_SEL_SHIFT		0

 /* 4313 Chip specific ChipControl register bits */
  /* 12 mA drive strengh for later 4313 */
 #define CCTRL_4313_12MA_LED_DRIVE    0x00000007

 /* Manufacturer Ids */
 #define	MFGID_ARM		0x43b
 #define	MFGID_BRCM		0x4bf
 #define	MFGID_MIPS		0x4a7

 /* Enumeration ROM registers */
 #define	ER_EROMENTRY		0x000
 #define	ER_REMAPCONTROL		0xe00
 #define	ER_REMAPSELECT		0xe04
 #define	ER_MASTERSELECT		0xe10
 #define	ER_ITCR			0xf00
 #define	ER_ITIP			0xf04

 /* Erom entries */
 #define	ER_TAG			0xe
 #define	ER_TAG1			0x6
 #define	ER_VALID		1
 #define	ER_CI			0
 #define	ER_MP			2
 #define	ER_ADD			4
 #define	ER_END			0xe
 #define	ER_BAD			0xffffffff

 /* EROM CompIdentA */
 #define	CIA_MFG_MASK		0xfff00000
 #define	CIA_MFG_SHIFT		20
 #define	CIA_CID_MASK		0x000fff00
 #define	CIA_CID_SHIFT		8
 #define	CIA_CCL_MASK		0x000000f0
 #define	CIA_CCL_SHIFT		4

 /* EROM CompIdentB */
 #define	CIB_REV_MASK		0xff000000
 #define	CIB_REV_SHIFT		24
 #define	CIB_NSW_MASK		0x00f80000
 #define	CIB_NSW_SHIFT		19
 #define	CIB_NMW_MASK		0x0007c000
 #define	CIB_NMW_SHIFT		14
 #define	CIB_NSP_MASK		0x00003e00
 #define	CIB_NSP_SHIFT		9
 #define	CIB_NMP_MASK		0x000001f0
 #define	CIB_NMP_SHIFT		4

 /* EROM AddrDesc */
 #define	AD_ADDR_MASK		0xfffff000
 #define	AD_SP_MASK		0x00000f00
 #define	AD_SP_SHIFT		8
 #define	AD_ST_MASK		0x000000c0
 #define	AD_ST_SHIFT		6
 #define	AD_ST_SLAVE		0x00000000
 #define	AD_ST_BRIDGE		0x00000040
 #define	AD_ST_SWRAP		0x00000080
 #define	AD_ST_MWRAP		0x000000c0
 #define	AD_SZ_MASK		0x00000030
 #define	AD_SZ_SHIFT		4
 #define	AD_SZ_4K		0x00000000
 #define	AD_SZ_8K		0x00000010
 #define	AD_SZ_16K		0x00000020
 #define	AD_SZ_SZD		0x00000030
 #define	AD_AG32			0x00000008
 #define	AD_ADDR_ALIGN		0x00000fff
 #define	AD_SZ_BASE		0x00001000	/* 4KB */

 /* EROM SizeDesc */
 #define	SD_SZ_MASK		0xfffff000
 #define	SD_SG32			0x00000008
 #define	SD_SZ_ALIGN		0x00000fff

 /* PCI config space bit 4 for 4306c0 slow clock source */
 #define	PCI_CFG_GPIO_SCS	0x10
 /* PCI config space GPIO 14 for Xtal power-up */
 #define PCI_CFG_GPIO_XTAL	0x40
 /* PCI config space GPIO 15 for PLL power-down */
 #define PCI_CFG_GPIO_PLL	0x80

 /* power control defines */
 #define PLL_DELAY		150	/* us pll on delay */
 #define FREF_DELAY		200	/* us fref change delay */
 #define	XTAL_ON_DELAY		1000	/* us crystal power-on delay */

 /* resetctrl */
 #define	AIRC_RESET		1

 #define	NOREV		-1	/* Invalid rev */

 /* GPIO Based LED powersave defines */
 #define DEFAULT_GPIO_ONTIME	10	/* Default: 10% on */
 #define DEFAULT_GPIO_OFFTIME	90	/* Default: 10% on */

 /* When Srom support present, fields in sromcontrol */
 #define	SRC_START		0x80000000
 #define	SRC_BUSY		0x80000000
 #define	SRC_OPCODE		0x60000000
 #define	SRC_OP_READ		0x00000000
 #define	SRC_OP_WRITE		0x20000000
 #define	SRC_OP_WRDIS		0x40000000
 #define	SRC_OP_WREN		0x60000000
 #define	SRC_OTPSEL		0x00000010
 #define	SRC_LOCK		0x00000008
 #define	SRC_SIZE_MASK		0x00000006
 #define	SRC_SIZE_1K		0x00000000
 #define	SRC_SIZE_4K		0x00000002
 #define	SRC_SIZE_16K		0x00000004
 #define	SRC_SIZE_SHIFT		1
 #define	SRC_PRESENT		0x00000001

 /* External PA enable mask */
 #define GPIO_CTRL_EPA_EN_MASK 0x40

 #define DEFAULT_GPIOTIMERVAL \
 	((DEFAULT_GPIO_ONTIME << GPIO_ONTIME_SHIFT) | DEFAULT_GPIO_OFFTIME)

 #define	BADIDX		(SI_MAXCORES + 1)

 #define	IS_SIM(chippkg)	\
 	((chippkg == HDLSIM_PKG_ID) || (chippkg == HWSIM_PKG_ID))

 #ifdef DEBUG
 #define	SI_MSG(fmt, ...)	pr_debug(fmt, ##__VA_ARGS__)
 #else
 #define	SI_MSG(fmt, ...)	no_printk(fmt, ##__VA_ARGS__)
 #endif				/* DEBUG */

 #define	GOODCOREADDR(x, b) \
 	(((x) >= (b)) && ((x) < ((b) + SI_MAXCORES * SI_CORE_SIZE)) && \
 		IS_ALIGNED((x), SI_CORE_SIZE))

 struct aidmp {
 	u32 oobselina30;	/* 0x000 */
 	u32 oobselina74;	/* 0x004 */
 	u32 PAD[6];
 	u32 oobselinb30;	/* 0x020 */
 	u32 oobselinb74;	/* 0x024 */
 	u32 PAD[6];
 	u32 oobselinc30;	/* 0x040 */
 	u32 oobselinc74;	/* 0x044 */
 	u32 PAD[6];
 	u32 oobselind30;	/* 0x060 */
 	u32 oobselind74;	/* 0x064 */
 	u32 PAD[38];
 	u32 oobselouta30;	/* 0x100 */
 	u32 oobselouta74;	/* 0x104 */
 	u32 PAD[6];
 	u32 oobseloutb30;	/* 0x120 */
 	u32 oobseloutb74;	/* 0x124 */
 	u32 PAD[6];
 	u32 oobseloutc30;	/* 0x140 */
 	u32 oobseloutc74;	/* 0x144 */
 	u32 PAD[6];
 	u32 oobseloutd30;	/* 0x160 */
 	u32 oobseloutd74;	/* 0x164 */
 	u32 PAD[38];
 	u32 oobsynca;	/* 0x200 */
 	u32 oobseloutaen;	/* 0x204 */
 	u32 PAD[6];
 	u32 oobsyncb;	/* 0x220 */
 	u32 oobseloutben;	/* 0x224 */
 	u32 PAD[6];
 	u32 oobsyncc;	/* 0x240 */
 	u32 oobseloutcen;	/* 0x244 */
 	u32 PAD[6];
 	u32 oobsyncd;	/* 0x260 */
 	u32 oobseloutden;	/* 0x264 */
 	u32 PAD[38];
 	u32 oobaextwidth;	/* 0x300 */
 	u32 oobainwidth;	/* 0x304 */
 	u32 oobaoutwidth;	/* 0x308 */
 	u32 PAD[5];
 	u32 oobbextwidth;	/* 0x320 */
 	u32 oobbinwidth;	/* 0x324 */
 	u32 oobboutwidth;	/* 0x328 */
 	u32 PAD[5];
 	u32 oobcextwidth;	/* 0x340 */
 	u32 oobcinwidth;	/* 0x344 */
 	u32 oobcoutwidth;	/* 0x348 */
 	u32 PAD[5];
 	u32 oobdextwidth;	/* 0x360 */
 	u32 oobdinwidth;	/* 0x364 */
 	u32 oobdoutwidth;	/* 0x368 */
 	u32 PAD[37];
 	u32 ioctrlset;	/* 0x400 */
 	u32 ioctrlclear;	/* 0x404 */
 	u32 ioctrl;		/* 0x408 */
 	u32 PAD[61];
 	u32 iostatus;	/* 0x500 */
 	u32 PAD[127];
 	u32 ioctrlwidth;	/* 0x700 */
 	u32 iostatuswidth;	/* 0x704 */
 	u32 PAD[62];
 	u32 resetctrl;	/* 0x800 */
 	u32 resetstatus;	/* 0x804 */
 	u32 resetreadid;	/* 0x808 */
 	u32 resetwriteid;	/* 0x80c */
 	u32 PAD[60];
 	u32 errlogctrl;	/* 0x900 */
 	u32 errlogdone;	/* 0x904 */
 	u32 errlogstatus;	/* 0x908 */
 	u32 errlogaddrlo;	/* 0x90c */
 	u32 errlogaddrhi;	/* 0x910 */
 	u32 errlogid;	/* 0x914 */
 	u32 errloguser;	/* 0x918 */
 	u32 errlogflags;	/* 0x91c */
 	u32 PAD[56];
 	u32 intstatus;	/* 0xa00 */
 	u32 PAD[127];
 	u32 config;		/* 0xe00 */
 	u32 PAD[63];
 	u32 itcr;		/* 0xf00 */
 	u32 PAD[3];
 	u32 itipooba;	/* 0xf10 */
 	u32 itipoobb;	/* 0xf14 */
 	u32 itipoobc;	/* 0xf18 */
 	u32 itipoobd;	/* 0xf1c */
 	u32 PAD[4];
 	u32 itipoobaout;	/* 0xf30 */
 	u32 itipoobbout;	/* 0xf34 */
 	u32 itipoobcout;	/* 0xf38 */
 	u32 itipoobdout;	/* 0xf3c */
 	u32 PAD[4];
 	u32 itopooba;	/* 0xf50 */
 	u32 itopoobb;	/* 0xf54 */
 	u32 itopoobc;	/* 0xf58 */
 	u32 itopoobd;	/* 0xf5c */
 	u32 PAD[4];
 	u32 itopoobain;	/* 0xf70 */
 	u32 itopoobbin;	/* 0xf74 */
 	u32 itopoobcin;	/* 0xf78 */
 	u32 itopoobdin;	/* 0xf7c */
 	u32 PAD[4];
 	u32 itopreset;	/* 0xf90 */
 	u32 PAD[15];
 	u32 peripherialid4;	/* 0xfd0 */
 	u32 peripherialid5;	/* 0xfd4 */
 	u32 peripherialid6;	/* 0xfd8 */
 	u32 peripherialid7;	/* 0xfdc */
 	u32 peripherialid0;	/* 0xfe0 */
 	u32 peripherialid1;	/* 0xfe4 */
 	u32 peripherialid2;	/* 0xfe8 */
 	u32 peripherialid3;	/* 0xfec */
 	u32 componentid0;	/* 0xff0 */
 	u32 componentid1;	/* 0xff4 */
 	u32 componentid2;	/* 0xff8 */
 	u32 componentid3;	/* 0xffc */
 };

 static bool
 ai_buscore_setup(struct si_info *sii, struct bcma_device *cc)
 {
 	/* no cores found, bail out */
 	if (cc->bus->nr_cores == 0)
 		return false;

 	/* get chipcommon rev */
 	sii->pub.ccrev = cc->id.rev;

 	/* get chipcommon chipstatus */
 	sii->chipst = bcma_read32(cc, CHIPCREGOFFS(chipstatus));

 	/* get chipcommon capabilites */
 	sii->pub.cccaps = bcma_read32(cc, CHIPCREGOFFS(capabilities));

 	/* get pmu rev and caps */
 	if (ai_get_cccaps(&sii->pub) & CC_CAP_PMU) {
 		sii->pub.pmucaps = bcma_read32(cc,
 					       CHIPCREGOFFS(pmucapabilities));
 		sii->pub.pmurev = sii->pub.pmucaps & PCAP_REV_MASK;
 	}

 	return true;
 }

 static struct si_info *ai_doattach(struct si_info *sii,
 				   struct bcma_bus *pbus)
 {
 	struct si_pub *sih = &sii->pub;
 	struct bcma_device *cc;

 	sii->icbus = pbus;
 	sii->pcibus = pbus->host_pci;

 	/* switch to Chipcommon core */
 	cc = pbus->drv_cc.core;

 	sih->chip = pbus->chipinfo.id;
 	sih->chiprev = pbus->chipinfo.rev;
 	sih->chippkg = pbus->chipinfo.pkg;
 	sih->boardvendor = pbus->boardinfo.vendor;
 	sih->boardtype = pbus->boardinfo.type;

 	if (!ai_buscore_setup(sii, cc))
 		goto exit;

 	/* === NVRAM, clock is ready === */
 	bcma_write32(cc, CHIPCREGOFFS(gpiopullup), 0);
 	bcma_write32(cc, CHIPCREGOFFS(gpiopulldown), 0);

 	/* PMU specific initializations */
 	if (ai_get_cccaps(sih) & CC_CAP_PMU) {
 		(void)si_pmu_measure_alpclk(sih);
 	}

 	return sii;

  exit:

 	return NULL;
 }

 /*
  * Allocate a si handle and do the attach.
  */
 struct si_pub *
 ai_attach(struct bcma_bus *pbus)
 {
 	struct si_info *sii;

 	/* alloc struct si_info */
 	sii = kzalloc(sizeof(struct si_info), GFP_ATOMIC);
 	if (sii == NULL)
 		return NULL;

 	if (ai_doattach(sii, pbus) == NULL) {
 		kfree(sii);
 		return NULL;
 	}

 	return (struct si_pub *) sii;
 }

 /* may be called with core in reset */
 void ai_detach(struct si_pub *sih)
 {
 	struct si_info *sii;

 	sii = container_of(sih, struct si_info, pub);

 	if (sii == NULL)
 		return;

 	kfree(sii);
 }

 /*
  * read/modify chipcommon core register.
  */
 uint ai_cc_reg(struct si_pub *sih, uint regoff, u32 mask, u32 val)
 {
 	struct bcma_device *cc;
 	u32 w;
 	struct si_info *sii;

 	sii = container_of(sih, struct si_info, pub);
 	cc = sii->icbus->drv_cc.core;

 	/* mask and set */
 	if (mask || val)
 		bcma_maskset32(cc, regoff, ~mask, val);

 	/* readback */
 	w = bcma_read32(cc, regoff);

 	return w;
 }

 /* return the slow clock source - LPO, XTAL, or PCI */
 static uint ai_slowclk_src(struct si_pub *sih, struct bcma_device *cc)
 {
 	return SCC_SS_XTAL;
 }

 /*
 * return the ILP (slowclock) min or max frequency
 * precondition: we've established the chip has dynamic clk control
 */
 static uint ai_slowclk_freq(struct si_pub *sih, bool max_freq,
 			    struct bcma_device *cc)
 {
 	uint div;

 	/* Chipc rev 10 is InstaClock */
 	div = bcma_read32(cc, CHIPCREGOFFS(system_clk_ctl));
 	div = 4 * ((div >> SYCC_CD_SHIFT) + 1);
 	return max_freq ? XTALMAXFREQ : (XTALMINFREQ / div);
 }

 static void
 ai_clkctl_setdelay(struct si_pub *sih, struct bcma_device *cc)
 {
 	uint slowmaxfreq, pll_delay, slowclk;
 	uint pll_on_delay, fref_sel_delay;

 	pll_delay = PLL_DELAY;

 	/*
 	 * If the slow clock is not sourced by the xtal then
 	 * add the xtal_on_delay since the xtal will also be
 	 * powered down by dynamic clk control logic.
 	 */

 	slowclk = ai_slowclk_src(sih, cc);
 	if (slowclk != SCC_SS_XTAL)
 		pll_delay += XTAL_ON_DELAY;

 	/* Starting with 4318 it is ILP that is used for the delays */
 	slowmaxfreq =
 	    ai_slowclk_freq(sih, false, cc);

 	pll_on_delay = ((slowmaxfreq * pll_delay) + 999999) / 1000000;
 	fref_sel_delay = ((slowmaxfreq * FREF_DELAY) + 999999) / 1000000;

 	bcma_write32(cc, CHIPCREGOFFS(pll_on_delay), pll_on_delay);
 	bcma_write32(cc, CHIPCREGOFFS(fref_sel_delay), fref_sel_delay);
 }

 /* initialize power control delay registers */
 void ai_clkctl_init(struct si_pub *sih)
 {
 	struct si_info *sii = container_of(sih, struct si_info, pub);
 	struct bcma_device *cc;

 	if (!(ai_get_cccaps(sih) & CC_CAP_PWR_CTL))
 		return;

 	cc = sii->icbus->drv_cc.core;
 	if (cc == NULL)
 		return;

 	/* set all Instaclk chip ILP to 1 MHz */
 	bcma_maskset32(cc, CHIPCREGOFFS(system_clk_ctl), SYCC_CD_MASK,
 		       (ILP_DIV_1MHZ << SYCC_CD_SHIFT));

 	ai_clkctl_setdelay(sih, cc);
 }

 /*
  * return the value suitable for writing to the
  * dot11 core FAST_PWRUP_DELAY register
  */
 u16 ai_clkctl_fast_pwrup_delay(struct si_pub *sih)
 {
 	struct si_info *sii;
 	struct bcma_device *cc;
 	uint slowminfreq;
 	u16 fpdelay;

 	sii = container_of(sih, struct si_info, pub);
 	if (ai_get_cccaps(sih) & CC_CAP_PMU) {
 		fpdelay = si_pmu_fast_pwrup_delay(sih);
 		return fpdelay;
 	}

 	if (!(ai_get_cccaps(sih) & CC_CAP_PWR_CTL))
 		return 0;

 	fpdelay = 0;
 	cc = sii->icbus->drv_cc.core;
 	if (cc) {
 		slowminfreq = ai_slowclk_freq(sih, false, cc);
 		fpdelay = (((bcma_read32(cc, CHIPCREGOFFS(pll_on_delay)) + 2)
 			    * 1000000) + (slowminfreq - 1)) / slowminfreq;
 	}
 	return fpdelay;
 }

 /*
  *  clock control policy function throught chipcommon
  *
  *    set dynamic clk control mode (forceslow, forcefast, dynamic)
  *    returns true if we are forcing fast clock
  *    this is a wrapper over the next internal function
  *      to allow flexible policy settings for outside caller
  */
 bool ai_clkctl_cc(struct si_pub *sih, enum bcma_clkmode mode)
 {
 	struct si_info *sii;
 	struct bcma_device *cc;

 	sii = container_of(sih, struct si_info, pub);

 	cc = sii->icbus->drv_cc.core;
 	bcma_core_set_clockmode(cc, mode);
 	return mode == BCMA_CLKMODE_FAST;
 }

 void ai_pci_up(struct si_pub *sih)
 {
 	struct si_info *sii;

 	sii = container_of(sih, struct si_info, pub);

 	if (sii->icbus->hosttype == BCMA_HOSTTYPE_PCI)
 		bcma_core_pci_extend_L1timer(&sii->icbus->drv_pci, true);
 }

 /* Unconfigure and/or apply various WARs when going down */
 void ai_pci_down(struct si_pub *sih)
 {
 	struct si_info *sii;

 	sii = container_of(sih, struct si_info, pub);

 	if (sii->icbus->hosttype == BCMA_HOSTTYPE_PCI)
 		bcma_core_pci_extend_L1timer(&sii->icbus->drv_pci, false);
 }

 /* Enable BT-COEX & Ex-PA for 4313 */
 void ai_epa_4313war(struct si_pub *sih)
 {
 	struct si_info *sii = container_of(sih, struct si_info, pub);
 	struct bcma_device *cc;

 	cc = sii->icbus->drv_cc.core;

 	/* EPA Fix */
 	bcma_set32(cc, CHIPCREGOFFS(gpiocontrol), GPIO_CTRL_EPA_EN_MASK);
 }

 /* check if the device is removed */
 bool ai_deviceremoved(struct si_pub *sih)
 {
 	u32 w;
 	struct si_info *sii;

 	sii = container_of(sih, struct si_info, pub);

 	if (sii->icbus->hosttype != BCMA_HOSTTYPE_PCI)
 		return false;

 	pci_read_config_dword(sii->pcibus, PCI_VENDOR_ID, &w);
 	if ((w & 0xFFFF) != PCI_VENDOR_ID_BROADCOM)
 		return true;

 	return false;
 }
	/*
	* Copyright (c) 2010 Broadcom Corporation
	*
	* Permission to use, copy, modify, and/or distribute this software for any
	* purpose with or without fee is hereby granted, provided that the above
	* copyright notice and this permission notice appear in all copies.
	*
	* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
	* WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
	* MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
	* SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
	* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION
	* OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN
	* CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
	*
	* File contents: support functions for PCI/PCIe
	*/

	#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt

	#include <linux/delay.h>

	#include <defs.h>
	#include <chipcommon.h>
	#include <brcmu_utils.h>
	#include <brcm_hw_ids.h>
	#include <soc.h>
	#include "types.h"
	#include "pub.h"
	#include "pmu.h"
	#include "aiutils.h"

	/* slow_clk_ctl */
	/* slow clock source mask */
	#define SCC_SS_MASK 0x00000007
	/* source of slow clock is LPO */
	#define SCC_SS_LPO 0x00000000
	/* source of slow clock is crystal */
	#define SCC_SS_XTAL 0x00000001
	/* source of slow clock is PCI */
	#define SCC_SS_PCI 0x00000002
	/* LPOFreqSel, 1: 160Khz, 0: 32KHz */
	#define SCC_LF 0x00000200
	/* LPOPowerDown, 1: LPO is disabled, 0: LPO is enabled */
	#define SCC_LP 0x00000400
	/* ForceSlowClk, 1: sb/cores running on slow clock, 0: power logic control */
	#define SCC_FS 0x00000800
	/* IgnorePllOffReq, 1/0:
	* power logic ignores/honors PLL clock disable requests from core
	*/
	#define SCC_IP 0x00001000
	/* XtalControlEn, 1/0:
	* power logic does/doesn't disable crystal when appropriate
	*/
	#define SCC_XC 0x00002000
	/* XtalPU (RO), 1/0: crystal running/disabled */
	#define SCC_XP 0x00004000
	/* ClockDivider (SlowClk = 1/(4+divisor)) */
	#define SCC_CD_MASK 0xffff0000
	#define SCC_CD_SHIFT 16

	/* system_clk_ctl */
	/* ILPen: Enable Idle Low Power */
	#define SYCC_IE 0x00000001
	/* ALPen: Enable Active Low Power */
	#define SYCC_AE 0x00000002
	/* ForcePLLOn */
	#define SYCC_FP 0x00000004
	/* Force ALP (or HT if ALPen is not set */
	#define SYCC_AR 0x00000008
	/* Force HT */
	#define SYCC_HR 0x00000010
	/* ClkDiv (ILP = 1/(4 * (divisor + 1)) */
	#define SYCC_CD_MASK 0xffff0000
	#define SYCC_CD_SHIFT 16

	#define CST4329_SPROM_OTP_SEL_MASK 0x00000003
	/* OTP is powered up, use def. CIS, no SPROM */
	#define CST4329_DEFCIS_SEL 0
	/* OTP is powered up, SPROM is present */
	#define CST4329_SPROM_SEL 1
	/* OTP is powered up, no SPROM */
	#define CST4329_OTP_SEL 2
	/* OTP is powered down, SPROM is present */
	#define CST4329_OTP_PWRDN 3

	#define CST4329_SPI_SDIO_MODE_MASK 0x00000004
	#define CST4329_SPI_SDIO_MODE_SHIFT 2

	/* 43224 chip-specific ChipControl register bits */
	#define CCTRL43224_GPIO_TOGGLE 0x8000
	/* 12 mA drive strength */
	#define CCTRL_43224A0_12MA_LED_DRIVE 0x00F000F0
	/* 12 mA drive strength for later 43224s */
	#define CCTRL_43224B0_12MA_LED_DRIVE 0xF0

	/* 43236 Chip specific ChipStatus register bits */
	#define CST43236_SFLASH_MASK 0x00000040
	#define CST43236_OTP_MASK 0x00000080
	#define CST43236_HSIC_MASK 0x00000100 /* USB/HSIC */
	#define CST43236_BP_CLK 0x00000200 /* 120/96Mbps */
	#define CST43236_BOOT_MASK 0x00001800
	#define CST43236_BOOT_SHIFT 11
	#define CST43236_BOOT_FROM_SRAM 0 /* boot from SRAM, ARM in reset */
	#define CST43236_BOOT_FROM_ROM 1 /* boot from ROM */
	#define CST43236_BOOT_FROM_FLASH 2 /* boot from FLASH */
	#define CST43236_BOOT_FROM_INVALID 3

	/* 4331 chip-specific ChipControl register bits */
	/* 0 disable */
	#define CCTRL4331_BT_COEXIST (1<<0)
	/* 0 SECI is disabled (JTAG functional) */
	#define CCTRL4331_SECI (1<<1)
	/* 0 disable */
	#define CCTRL4331_EXT_LNA (1<<2)
	/* sprom/gpio13-15 mux */
	#define CCTRL4331_SPROM_GPIO13_15 (1<<3)
	/* 0 ext pa disable, 1 ext pa enabled */
	#define CCTRL4331_EXTPA_EN (1<<4)
	/* set drive out GPIO_CLK on sprom_cs pin */
	#define CCTRL4331_GPIOCLK_ON_SPROMCS (1<<5)
	/* use sprom_cs pin as PCIE mdio interface */
	#define CCTRL4331_PCIE_MDIO_ON_SPROMCS (1<<6)
	/* aband extpa will be at gpio2/5 and sprom_dout */
	#define CCTRL4331_EXTPA_ON_GPIO2_5 (1<<7)
	/* override core control on pipe_AuxClkEnable */
	#define CCTRL4331_OVR_PIPEAUXCLKEN (1<<8)
	/* override core control on pipe_AuxPowerDown */
	#define CCTRL4331_OVR_PIPEAUXPWRDOWN (1<<9)
	/* pcie_auxclkenable */
	#define CCTRL4331_PCIE_AUXCLKEN (1<<10)
	/* pcie_pipe_pllpowerdown */
	#define CCTRL4331_PCIE_PIPE_PLLDOWN (1<<11)
	/* enable bt_shd0 at gpio4 */
	#define CCTRL4331_BT_SHD0_ON_GPIO4 (1<<16)
	/* enable bt_shd1 at gpio5 */
	#define CCTRL4331_BT_SHD1_ON_GPIO5 (1<<17)

	/* 4331 Chip specific ChipStatus register bits */
	/* crystal frequency 20/40Mhz */
	#define CST4331_XTAL_FREQ 0x00000001
	#define CST4331_SPROM_PRESENT 0x00000002
	#define CST4331_OTP_PRESENT 0x00000004
	#define CST4331_LDO_RF 0x00000008
	#define CST4331_LDO_PAR 0x00000010

	/* 4319 chip-specific ChipStatus register bits */
	#define CST4319_SPI_CPULESSUSB 0x00000001
	#define CST4319_SPI_CLK_POL 0x00000002
	#define CST4319_SPI_CLK_PH 0x00000008
	/* gpio [7:6], SDIO CIS selection */
	#define CST4319_SPROM_OTP_SEL_MASK 0x000000c0
	#define CST4319_SPROM_OTP_SEL_SHIFT 6
	/* use default CIS, OTP is powered up */
	#define CST4319_DEFCIS_SEL 0x00000000
	/* use SPROM, OTP is powered up */
	#define CST4319_SPROM_SEL 0x00000040
	/* use OTP, OTP is powered up */
	#define CST4319_OTP_SEL 0x00000080
	/* use SPROM, OTP is powered down */
	#define CST4319_OTP_PWRDN 0x000000c0
	/* gpio [8], sdio/usb mode */
	#define CST4319_SDIO_USB_MODE 0x00000100
	#define CST4319_REMAP_SEL_MASK 0x00000600
	#define CST4319_ILPDIV_EN 0x00000800
	#define CST4319_XTAL_PD_POL 0x00001000
	#define CST4319_LPO_SEL 0x00002000
	#define CST4319_RES_INIT_MODE 0x0000c000
	/* PALDO is configured with external PNP */
	#define CST4319_PALDO_EXTPNP 0x00010000
	#define CST4319_CBUCK_MODE_MASK 0x00060000
	#define CST4319_CBUCK_MODE_BURST 0x00020000
	#define CST4319_CBUCK_MODE_LPBURST 0x00060000
	#define CST4319_RCAL_VALID 0x01000000
	#define CST4319_RCAL_VALUE_MASK 0x3e000000
	#define CST4319_RCAL_VALUE_SHIFT 25

	/* 4336 chip-specific ChipStatus register bits */
	#define CST4336_SPI_MODE_MASK 0x00000001
	#define CST4336_SPROM_PRESENT 0x00000002
	#define CST4336_OTP_PRESENT 0x00000004
	#define CST4336_ARMREMAP_0 0x00000008
	#define CST4336_ILPDIV_EN_MASK 0x00000010
	#define CST4336_ILPDIV_EN_SHIFT 4
	#define CST4336_XTAL_PD_POL_MASK 0x00000020
	#define CST4336_XTAL_PD_POL_SHIFT 5
	#define CST4336_LPO_SEL_MASK 0x00000040
	#define CST4336_LPO_SEL_SHIFT 6
	#define CST4336_RES_INIT_MODE_MASK 0x00000180
	#define CST4336_RES_INIT_MODE_SHIFT 7
	#define CST4336_CBUCK_MODE_MASK 0x00000600
	#define CST4336_CBUCK_MODE_SHIFT 9

	/* 4313 chip-specific ChipStatus register bits */
	#define CST4313_SPROM_PRESENT 1
	#define CST4313_OTP_PRESENT 2
	#define CST4313_SPROM_OTP_SEL_MASK 0x00000002
	#define CST4313_SPROM_OTP_SEL_SHIFT 0

	/* 4313 Chip specific ChipControl register bits */
	/* 12 mA drive strengh for later 4313 */
	#define CCTRL_4313_12MA_LED_DRIVE 0x00000007

	/* Manufacturer Ids */
	#define MFGID_ARM 0x43b
	#define MFGID_BRCM 0x4bf
	#define MFGID_MIPS 0x4a7

	/* Enumeration ROM registers */
	#define ER_EROMENTRY 0x000
	#define ER_REMAPCONTROL 0xe00
	#define ER_REMAPSELECT 0xe04
	#define ER_MASTERSELECT 0xe10
	#define ER_ITCR 0xf00
	#define ER_ITIP 0xf04

	/* Erom entries */
	#define ER_TAG 0xe
	#define ER_TAG1 0x6
	#define ER_VALID 1
	#define ER_CI 0
	#define ER_MP 2
	#define ER_ADD 4
	#define ER_END 0xe
	#define ER_BAD 0xffffffff

	/* EROM CompIdentA */
	#define CIA_MFG_MASK 0xfff00000
	#define CIA_MFG_SHIFT 20
	#define CIA_CID_MASK 0x000fff00
	#define CIA_CID_SHIFT 8
	#define CIA_CCL_MASK 0x000000f0
	#define CIA_CCL_SHIFT 4

	/* EROM CompIdentB */
	#define CIB_REV_MASK 0xff000000
	#define CIB_REV_SHIFT 24
	#define CIB_NSW_MASK 0x00f80000
	#define CIB_NSW_SHIFT 19
	#define CIB_NMW_MASK 0x0007c000
	#define CIB_NMW_SHIFT 14
	#define CIB_NSP_MASK 0x00003e00
	#define CIB_NSP_SHIFT 9
	#define CIB_NMP_MASK 0x000001f0
	#define CIB_NMP_SHIFT 4

	/* EROM AddrDesc */
	#define AD_ADDR_MASK 0xfffff000
	#define AD_SP_MASK 0x00000f00
	#define AD_SP_SHIFT 8
	#define AD_ST_MASK 0x000000c0
	#define AD_ST_SHIFT 6
	#define AD_ST_SLAVE 0x00000000
	#define AD_ST_BRIDGE 0x00000040
	#define AD_ST_SWRAP 0x00000080
	#define AD_ST_MWRAP 0x000000c0
	#define AD_SZ_MASK 0x00000030
	#define AD_SZ_SHIFT 4
	#define AD_SZ_4K 0x00000000
	#define AD_SZ_8K 0x00000010
	#define AD_SZ_16K 0x00000020
	#define AD_SZ_SZD 0x00000030
	#define AD_AG32 0x00000008
	#define AD_ADDR_ALIGN 0x00000fff
	#define AD_SZ_BASE 0x00001000 /* 4KB */

	/* EROM SizeDesc */
	#define SD_SZ_MASK 0xfffff000
	#define SD_SG32 0x00000008
	#define SD_SZ_ALIGN 0x00000fff

	/* PCI config space bit 4 for 4306c0 slow clock source */
	#define PCI_CFG_GPIO_SCS 0x10
	/* PCI config space GPIO 14 for Xtal power-up */
	#define PCI_CFG_GPIO_XTAL 0x40
	/* PCI config space GPIO 15 for PLL power-down */
	#define PCI_CFG_GPIO_PLL 0x80

	/* power control defines */
	#define PLL_DELAY 150 /* us pll on delay */
	#define FREF_DELAY 200 /* us fref change delay */
	#define XTAL_ON_DELAY 1000 /* us crystal power-on delay */

	/* resetctrl */
	#define AIRC_RESET 1

	#define NOREV -1 /* Invalid rev */

	/* GPIO Based LED powersave defines */
	#define DEFAULT_GPIO_ONTIME 10 /* Default: 10% on */
	#define DEFAULT_GPIO_OFFTIME 90 /* Default: 10% on */

	/* When Srom support present, fields in sromcontrol */
	#define SRC_START 0x80000000
	#define SRC_BUSY 0x80000000
	#define SRC_OPCODE 0x60000000
	#define SRC_OP_READ 0x00000000
	#define SRC_OP_WRITE 0x20000000
	#define SRC_OP_WRDIS 0x40000000
	#define SRC_OP_WREN 0x60000000
	#define SRC_OTPSEL 0x00000010
	#define SRC_LOCK 0x00000008
	#define SRC_SIZE_MASK 0x00000006
	#define SRC_SIZE_1K 0x00000000
	#define SRC_SIZE_4K 0x00000002
	#define SRC_SIZE_16K 0x00000004
	#define SRC_SIZE_SHIFT 1
	#define SRC_PRESENT 0x00000001

	/* External PA enable mask */
	#define GPIO_CTRL_EPA_EN_MASK 0x40

	#define DEFAULT_GPIOTIMERVAL \
	((DEFAULT_GPIO_ONTIME << GPIO_ONTIME_SHIFT) \| DEFAULT_GPIO_OFFTIME)

	#define BADIDX (SI_MAXCORES + 1)

	#define IS_SIM(chippkg) \
	((chippkg == HDLSIM_PKG_ID) \|\| (chippkg == HWSIM_PKG_ID))

	#ifdef DEBUG
	#define SI_MSG(fmt, ...) pr_debug(fmt, ##__VA_ARGS__)
	#else
	#define SI_MSG(fmt, ...) no_printk(fmt, ##__VA_ARGS__)
	#endif /* DEBUG */

	#define GOODCOREADDR(x, b) \
	(((x) >= (b)) && ((x) < ((b) + SI_MAXCORES * SI_CORE_SIZE)) && \
	IS_ALIGNED((x), SI_CORE_SIZE))

	struct aidmp {
	u32 oobselina30; /* 0x000 */
	u32 oobselina74; /* 0x004 */
	u32 PAD[6];
	u32 oobselinb30; /* 0x020 */
	u32 oobselinb74; /* 0x024 */
	u32 PAD[6];
	u32 oobselinc30; /* 0x040 */
	u32 oobselinc74; /* 0x044 */
	u32 PAD[6];
	u32 oobselind30; /* 0x060 */
	u32 oobselind74; /* 0x064 */
	u32 PAD[38];
	u32 oobselouta30; /* 0x100 */
	u32 oobselouta74; /* 0x104 */
	u32 PAD[6];
	u32 oobseloutb30; /* 0x120 */
	u32 oobseloutb74; /* 0x124 */
	u32 PAD[6];
	u32 oobseloutc30; /* 0x140 */
	u32 oobseloutc74; /* 0x144 */
	u32 PAD[6];
	u32 oobseloutd30; /* 0x160 */
	u32 oobseloutd74; /* 0x164 */
	u32 PAD[38];
	u32 oobsynca; /* 0x200 */
	u32 oobseloutaen; /* 0x204 */
	u32 PAD[6];
	u32 oobsyncb; /* 0x220 */
	u32 oobseloutben; /* 0x224 */
	u32 PAD[6];
	u32 oobsyncc; /* 0x240 */
	u32 oobseloutcen; /* 0x244 */
	u32 PAD[6];
	u32 oobsyncd; /* 0x260 */
	u32 oobseloutden; /* 0x264 */
	u32 PAD[38];
	u32 oobaextwidth; /* 0x300 */
	u32 oobainwidth; /* 0x304 */
	u32 oobaoutwidth; /* 0x308 */
	u32 PAD[5];
	u32 oobbextwidth; /* 0x320 */
	u32 oobbinwidth; /* 0x324 */
	u32 oobboutwidth; /* 0x328 */
	u32 PAD[5];
	u32 oobcextwidth; /* 0x340 */
	u32 oobcinwidth; /* 0x344 */
	u32 oobcoutwidth; /* 0x348 */
	u32 PAD[5];
	u32 oobdextwidth; /* 0x360 */
	u32 oobdinwidth; /* 0x364 */
	u32 oobdoutwidth; /* 0x368 */
	u32 PAD[37];
	u32 ioctrlset; /* 0x400 */
	u32 ioctrlclear; /* 0x404 */
	u32 ioctrl; /* 0x408 */
	u32 PAD[61];
	u32 iostatus; /* 0x500 */
	u32 PAD[127];
	u32 ioctrlwidth; /* 0x700 */
	u32 iostatuswidth; /* 0x704 */
	u32 PAD[62];
	u32 resetctrl; /* 0x800 */
	u32 resetstatus; /* 0x804 */
	u32 resetreadid; /* 0x808 */
	u32 resetwriteid; /* 0x80c */
	u32 PAD[60];
	u32 errlogctrl; /* 0x900 */
	u32 errlogdone; /* 0x904 */
	u32 errlogstatus; /* 0x908 */
	u32 errlogaddrlo; /* 0x90c */
	u32 errlogaddrhi; /* 0x910 */
	u32 errlogid; /* 0x914 */
	u32 errloguser; /* 0x918 */
	u32 errlogflags; /* 0x91c */
	u32 PAD[56];
	u32 intstatus; /* 0xa00 */
	u32 PAD[127];
	u32 config; /* 0xe00 */
	u32 PAD[63];
	u32 itcr; /* 0xf00 */
	u32 PAD[3];
	u32 itipooba; /* 0xf10 */
	u32 itipoobb; /* 0xf14 */
	u32 itipoobc; /* 0xf18 */
	u32 itipoobd; /* 0xf1c */
	u32 PAD[4];
	u32 itipoobaout; /* 0xf30 */
	u32 itipoobbout; /* 0xf34 */
	u32 itipoobcout; /* 0xf38 */
	u32 itipoobdout; /* 0xf3c */
	u32 PAD[4];
	u32 itopooba; /* 0xf50 */
	u32 itopoobb; /* 0xf54 */
	u32 itopoobc; /* 0xf58 */
	u32 itopoobd; /* 0xf5c */
	u32 PAD[4];
	u32 itopoobain; /* 0xf70 */
	u32 itopoobbin; /* 0xf74 */
	u32 itopoobcin; /* 0xf78 */
	u32 itopoobdin; /* 0xf7c */
	u32 PAD[4];
	u32 itopreset; /* 0xf90 */
	u32 PAD[15];
	u32 peripherialid4; /* 0xfd0 */
	u32 peripherialid5; /* 0xfd4 */
	u32 peripherialid6; /* 0xfd8 */
	u32 peripherialid7; /* 0xfdc */
	u32 peripherialid0; /* 0xfe0 */
	u32 peripherialid1; /* 0xfe4 */
	u32 peripherialid2; /* 0xfe8 */
	u32 peripherialid3; /* 0xfec */
	u32 componentid0; /* 0xff0 */
	u32 componentid1; /* 0xff4 */
	u32 componentid2; /* 0xff8 */
	u32 componentid3; /* 0xffc */
	};

	static bool
	ai_buscore_setup(struct si_info sii, struct bcma_device cc)
	{
	/* no cores found, bail out */
	if (cc->bus->nr_cores == 0)
	return false;

	/* get chipcommon rev */
	sii->pub.ccrev = cc->id.rev;

	/* get chipcommon chipstatus */
	sii->chipst = bcma_read32(cc, CHIPCREGOFFS(chipstatus));

	/* get chipcommon capabilites */
	sii->pub.cccaps = bcma_read32(cc, CHIPCREGOFFS(capabilities));

	/* get pmu rev and caps */
	if (ai_get_cccaps(&sii->pub) & CC_CAP_PMU) {
	sii->pub.pmucaps = bcma_read32(cc,
	CHIPCREGOFFS(pmucapabilities));
	sii->pub.pmurev = sii->pub.pmucaps & PCAP_REV_MASK;
	}

	return true;
	}

	static struct si_info ai_doattach(struct si_info sii,
	struct bcma_bus *pbus)
	{
	struct si_pub *sih = &sii->pub;
	struct bcma_device *cc;

	sii->icbus = pbus;
	sii->pcibus = pbus->host_pci;

	/* switch to Chipcommon core */
	cc = pbus->drv_cc.core;

	sih->chip = pbus->chipinfo.id;
	sih->chiprev = pbus->chipinfo.rev;
	sih->chippkg = pbus->chipinfo.pkg;
	sih->boardvendor = pbus->boardinfo.vendor;
	sih->boardtype = pbus->boardinfo.type;

	if (!ai_buscore_setup(sii, cc))
	goto exit;

	/* === NVRAM, clock is ready === */
	bcma_write32(cc, CHIPCREGOFFS(gpiopullup), 0);
	bcma_write32(cc, CHIPCREGOFFS(gpiopulldown), 0);

	/* PMU specific initializations */
	if (ai_get_cccaps(sih) & CC_CAP_PMU) {
	(void)si_pmu_measure_alpclk(sih);
	}

	return sii;

	exit:

	return NULL;
	}

	/*
	* Allocate a si handle and do the attach.
	*/
	struct si_pub *
	ai_attach(struct bcma_bus *pbus)
	{
	struct si_info *sii;

	/* alloc struct si_info */
	sii = kzalloc(sizeof(struct si_info), GFP_ATOMIC);
	if (sii == NULL)
	return NULL;

	if (ai_doattach(sii, pbus) == NULL) {
	kfree(sii);
	return NULL;
	}

	return (struct si_pub *) sii;
	}

	/* may be called with core in reset */
	void ai_detach(struct si_pub *sih)
	{
	struct si_info *sii;

	sii = container_of(sih, struct si_info, pub);

	if (sii == NULL)
	return;

	kfree(sii);
	}

	/*
	* read/modify chipcommon core register.
	*/
	uint ai_cc_reg(struct si_pub *sih, uint regoff, u32 mask, u32 val)
	{
	struct bcma_device *cc;
	u32 w;
	struct si_info *sii;

	sii = container_of(sih, struct si_info, pub);
	cc = sii->icbus->drv_cc.core;

	/* mask and set */
	if (mask \|\| val)
	bcma_maskset32(cc, regoff, ~mask, val);

	/* readback */
	w = bcma_read32(cc, regoff);

	return w;
	}

	/* return the slow clock source - LPO, XTAL, or PCI */
	static uint ai_slowclk_src(struct si_pub sih, struct bcma_device cc)
	{
	return SCC_SS_XTAL;
	}

	/*
	* return the ILP (slowclock) min or max frequency
	* precondition: we've established the chip has dynamic clk control
	*/
	static uint ai_slowclk_freq(struct si_pub *sih, bool max_freq,
	struct bcma_device *cc)
	{
	uint div;

	/* Chipc rev 10 is InstaClock */
	div = bcma_read32(cc, CHIPCREGOFFS(system_clk_ctl));
	div = 4 * ((div >> SYCC_CD_SHIFT) + 1);
	return max_freq ? XTALMAXFREQ : (XTALMINFREQ / div);
	}

	static void
	ai_clkctl_setdelay(struct si_pub sih, struct bcma_device cc)
	{
	uint slowmaxfreq, pll_delay, slowclk;
	uint pll_on_delay, fref_sel_delay;

	pll_delay = PLL_DELAY;

	/*
	* If the slow clock is not sourced by the xtal then
	* add the xtal_on_delay since the xtal will also be
	* powered down by dynamic clk control logic.
	*/

	slowclk = ai_slowclk_src(sih, cc);
	if (slowclk != SCC_SS_XTAL)
	pll_delay += XTAL_ON_DELAY;

	/* Starting with 4318 it is ILP that is used for the delays */
	slowmaxfreq =
	ai_slowclk_freq(sih, false, cc);

	pll_on_delay = ((slowmaxfreq * pll_delay) + 999999) / 1000000;
	fref_sel_delay = ((slowmaxfreq * FREF_DELAY) + 999999) / 1000000;

	bcma_write32(cc, CHIPCREGOFFS(pll_on_delay), pll_on_delay);
	bcma_write32(cc, CHIPCREGOFFS(fref_sel_delay), fref_sel_delay);
	}

	/* initialize power control delay registers */
	void ai_clkctl_init(struct si_pub *sih)
	{
	struct si_info *sii = container_of(sih, struct si_info, pub);
	struct bcma_device *cc;

	if (!(ai_get_cccaps(sih) & CC_CAP_PWR_CTL))
	return;

	cc = sii->icbus->drv_cc.core;
	if (cc == NULL)
	return;

	/* set all Instaclk chip ILP to 1 MHz */
	bcma_maskset32(cc, CHIPCREGOFFS(system_clk_ctl), SYCC_CD_MASK,
	(ILP_DIV_1MHZ << SYCC_CD_SHIFT));

	ai_clkctl_setdelay(sih, cc);
	}

	/*
	* return the value suitable for writing to the
	* dot11 core FAST_PWRUP_DELAY register
	*/
	u16 ai_clkctl_fast_pwrup_delay(struct si_pub *sih)
	{
	struct si_info *sii;
	struct bcma_device *cc;
	uint slowminfreq;
	u16 fpdelay;

	sii = container_of(sih, struct si_info, pub);
	if (ai_get_cccaps(sih) & CC_CAP_PMU) {
	fpdelay = si_pmu_fast_pwrup_delay(sih);
	return fpdelay;
	}

	if (!(ai_get_cccaps(sih) & CC_CAP_PWR_CTL))
	return 0;

	fpdelay = 0;
	cc = sii->icbus->drv_cc.core;
	if (cc) {
	slowminfreq = ai_slowclk_freq(sih, false, cc);
	fpdelay = (((bcma_read32(cc, CHIPCREGOFFS(pll_on_delay)) + 2)
	* 1000000) + (slowminfreq - 1)) / slowminfreq;
	}
	return fpdelay;
	}

	/*
	* clock control policy function throught chipcommon
	*
	* set dynamic clk control mode (forceslow, forcefast, dynamic)
	* returns true if we are forcing fast clock
	* this is a wrapper over the next internal function
	* to allow flexible policy settings for outside caller
	*/
	bool ai_clkctl_cc(struct si_pub *sih, enum bcma_clkmode mode)
	{
	struct si_info *sii;
	struct bcma_device *cc;

	sii = container_of(sih, struct si_info, pub);

	cc = sii->icbus->drv_cc.core;
	bcma_core_set_clockmode(cc, mode);
	return mode == BCMA_CLKMODE_FAST;
	}

	void ai_pci_up(struct si_pub *sih)
	{
	struct si_info *sii;

	sii = container_of(sih, struct si_info, pub);

	if (sii->icbus->hosttype == BCMA_HOSTTYPE_PCI)
	bcma_core_pci_extend_L1timer(&sii->icbus->drv_pci, true);
	}

	/* Unconfigure and/or apply various WARs when going down */
	void ai_pci_down(struct si_pub *sih)
	{
	struct si_info *sii;

	sii = container_of(sih, struct si_info, pub);

	if (sii->icbus->hosttype == BCMA_HOSTTYPE_PCI)
	bcma_core_pci_extend_L1timer(&sii->icbus->drv_pci, false);
	}

	/* Enable BT-COEX & Ex-PA for 4313 */
	void ai_epa_4313war(struct si_pub *sih)
	{
	struct si_info *sii = container_of(sih, struct si_info, pub);
	struct bcma_device *cc;

	cc = sii->icbus->drv_cc.core;

	/* EPA Fix */
	bcma_set32(cc, CHIPCREGOFFS(gpiocontrol), GPIO_CTRL_EPA_EN_MASK);
	}

	/* check if the device is removed */
	bool ai_deviceremoved(struct si_pub *sih)
	{
	u32 w;
	struct si_info *sii;

	sii = container_of(sih, struct si_info, pub);

	if (sii->icbus->hosttype != BCMA_HOSTTYPE_PCI)
	return false;

	pci_read_config_dword(sii->pcibus, PCI_VENDOR_ID, &w);
	if ((w & 0xFFFF) != PCI_VENDOR_ID_BROADCOM)
	return true;

	return false;
	}