| /* Kernel module help for PPC64. |
| Copyright (C) 2001, 2003 Rusty Russell IBM Corporation. |
| |
| This program is free software; you can redistribute it and/or modify |
| it under the terms of the GNU General Public License as published by |
| the Free Software Foundation; either version 2 of the License, or |
| (at your option) any later version. |
| |
| This program is distributed in the hope that it will be useful, |
| but WITHOUT ANY WARRANTY; without even the implied warranty of |
| MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| GNU General Public License for more details. |
| |
| You should have received a copy of the GNU General Public License |
| along with this program; if not, write to the Free Software |
| Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA |
| */ |
| #include <linux/module.h> |
| #include <linux/elf.h> |
| #include <linux/moduleloader.h> |
| #include <linux/err.h> |
| #include <linux/vmalloc.h> |
| #include <linux/bug.h> |
| #include <linux/uaccess.h> |
| #include <asm/module.h> |
| #include <asm/sections.h> |
| #include <asm/firmware.h> |
| #include <asm/code-patching.h> |
| #include <linux/sort.h> |
| |
| #include "setup.h" |
| |
| /* FIXME: We don't do .init separately. To do this, we'd need to have |
| a separate r2 value in the init and core section, and stub between |
| them, too. |
| |
| Using a magic allocator which places modules within 32MB solves |
| this, and makes other things simpler. Anton? |
| --RR. */ |
| #if 0 |
| #define DEBUGP printk |
| #else |
| #define DEBUGP(fmt , ...) |
| #endif |
| |
| /* There's actually a third entry here, but it's unused */ |
| struct ppc64_opd_entry |
| { |
| unsigned long funcaddr; |
| unsigned long r2; |
| }; |
| |
| /* Like PPC32, we need little trampolines to do > 24-bit jumps (into |
| the kernel itself). But on PPC64, these need to be used for every |
| jump, actually, to reset r2 (TOC+0x8000). */ |
| struct ppc64_stub_entry |
| { |
| /* 28 byte jump instruction sequence (7 instructions) */ |
| unsigned char jump[28]; |
| unsigned char unused[4]; |
| /* Data for the above code */ |
| struct ppc64_opd_entry opd; |
| }; |
| |
| /* We use a stub to fix up r2 (TOC ptr) and to jump to the (external) |
| function which may be more than 24-bits away. We could simply |
| patch the new r2 value and function pointer into the stub, but it's |
| significantly shorter to put these values at the end of the stub |
| code, and patch the stub address (32-bits relative to the TOC ptr, |
| r2) into the stub. */ |
| static struct ppc64_stub_entry ppc64_stub = |
| { .jump = { |
| 0x3d, 0x82, 0x00, 0x00, /* addis r12,r2, <high> */ |
| 0x39, 0x8c, 0x00, 0x00, /* addi r12,r12, <low> */ |
| /* Save current r2 value in magic place on the stack. */ |
| 0xf8, 0x41, 0x00, 0x28, /* std r2,40(r1) */ |
| 0xe9, 0x6c, 0x00, 0x20, /* ld r11,32(r12) */ |
| 0xe8, 0x4c, 0x00, 0x28, /* ld r2,40(r12) */ |
| 0x7d, 0x69, 0x03, 0xa6, /* mtctr r11 */ |
| 0x4e, 0x80, 0x04, 0x20 /* bctr */ |
| } }; |
| |
| /* Count how many different 24-bit relocations (different symbol, |
| different addend) */ |
| static unsigned int count_relocs(const Elf64_Rela *rela, unsigned int num) |
| { |
| unsigned int i, r_info, r_addend, _count_relocs; |
| |
| /* FIXME: Only count external ones --RR */ |
| _count_relocs = 0; |
| r_info = 0; |
| r_addend = 0; |
| for (i = 0; i < num; i++) |
| /* Only count 24-bit relocs, others don't need stubs */ |
| if (ELF64_R_TYPE(rela[i].r_info) == R_PPC_REL24 && |
| (r_info != ELF64_R_SYM(rela[i].r_info) || |
| r_addend != rela[i].r_addend)) { |
| _count_relocs++; |
| r_info = ELF64_R_SYM(rela[i].r_info); |
| r_addend = rela[i].r_addend; |
| } |
| |
| return _count_relocs; |
| } |
| |
| static int relacmp(const void *_x, const void *_y) |
| { |
| const Elf64_Rela *x, *y; |
| |
| y = (Elf64_Rela *)_x; |
| x = (Elf64_Rela *)_y; |
| |
| /* Compare the entire r_info (as opposed to ELF64_R_SYM(r_info) only) to |
| * make the comparison cheaper/faster. It won't affect the sorting or |
| * the counting algorithms' performance |
| */ |
| if (x->r_info < y->r_info) |
| return -1; |
| else if (x->r_info > y->r_info) |
| return 1; |
| else if (x->r_addend < y->r_addend) |
| return -1; |
| else if (x->r_addend > y->r_addend) |
| return 1; |
| else |
| return 0; |
| } |
| |
| static void relaswap(void *_x, void *_y, int size) |
| { |
| uint64_t *x, *y, tmp; |
| int i; |
| |
| y = (uint64_t *)_x; |
| x = (uint64_t *)_y; |
| |
| for (i = 0; i < sizeof(Elf64_Rela) / sizeof(uint64_t); i++) { |
| tmp = x[i]; |
| x[i] = y[i]; |
| y[i] = tmp; |
| } |
| } |
| |
| /* Get size of potential trampolines required. */ |
| static unsigned long get_stubs_size(const Elf64_Ehdr *hdr, |
| const Elf64_Shdr *sechdrs) |
| { |
| /* One extra reloc so it's always 0-funcaddr terminated */ |
| unsigned long relocs = 1; |
| unsigned i; |
| |
| /* Every relocated section... */ |
| for (i = 1; i < hdr->e_shnum; i++) { |
| if (sechdrs[i].sh_type == SHT_RELA) { |
| DEBUGP("Found relocations in section %u\n", i); |
| DEBUGP("Ptr: %p. Number: %lu\n", |
| (void *)sechdrs[i].sh_addr, |
| sechdrs[i].sh_size / sizeof(Elf64_Rela)); |
| |
| /* Sort the relocation information based on a symbol and |
| * addend key. This is a stable O(n*log n) complexity |
| * alogrithm but it will reduce the complexity of |
| * count_relocs() to linear complexity O(n) |
| */ |
| sort((void *)sechdrs[i].sh_addr, |
| sechdrs[i].sh_size / sizeof(Elf64_Rela), |
| sizeof(Elf64_Rela), relacmp, relaswap); |
| |
| relocs += count_relocs((void *)sechdrs[i].sh_addr, |
| sechdrs[i].sh_size |
| / sizeof(Elf64_Rela)); |
| } |
| } |
| |
| DEBUGP("Looks like a total of %lu stubs, max\n", relocs); |
| return relocs * sizeof(struct ppc64_stub_entry); |
| } |
| |
| static void dedotify_versions(struct modversion_info *vers, |
| unsigned long size) |
| { |
| struct modversion_info *end; |
| |
| for (end = (void *)vers + size; vers < end; vers++) |
| if (vers->name[0] == '.') |
| memmove(vers->name, vers->name+1, strlen(vers->name)); |
| } |
| |
| /* Undefined symbols which refer to .funcname, hack to funcname */ |
| static void dedotify(Elf64_Sym *syms, unsigned int numsyms, char *strtab) |
| { |
| unsigned int i; |
| |
| for (i = 1; i < numsyms; i++) { |
| if (syms[i].st_shndx == SHN_UNDEF) { |
| char *name = strtab + syms[i].st_name; |
| if (name[0] == '.') |
| memmove(name, name+1, strlen(name)); |
| } |
| } |
| } |
| |
| int module_frob_arch_sections(Elf64_Ehdr *hdr, |
| Elf64_Shdr *sechdrs, |
| char *secstrings, |
| struct module *me) |
| { |
| unsigned int i; |
| |
| /* Find .toc and .stubs sections, symtab and strtab */ |
| for (i = 1; i < hdr->e_shnum; i++) { |
| char *p; |
| if (strcmp(secstrings + sechdrs[i].sh_name, ".stubs") == 0) |
| me->arch.stubs_section = i; |
| else if (strcmp(secstrings + sechdrs[i].sh_name, ".toc") == 0) |
| me->arch.toc_section = i; |
| else if (strcmp(secstrings+sechdrs[i].sh_name,"__versions")==0) |
| dedotify_versions((void *)hdr + sechdrs[i].sh_offset, |
| sechdrs[i].sh_size); |
| |
| /* We don't handle .init for the moment: rename to _init */ |
| while ((p = strstr(secstrings + sechdrs[i].sh_name, ".init"))) |
| p[0] = '_'; |
| |
| if (sechdrs[i].sh_type == SHT_SYMTAB) |
| dedotify((void *)hdr + sechdrs[i].sh_offset, |
| sechdrs[i].sh_size / sizeof(Elf64_Sym), |
| (void *)hdr |
| + sechdrs[sechdrs[i].sh_link].sh_offset); |
| } |
| |
| if (!me->arch.stubs_section) { |
| printk("%s: doesn't contain .stubs.\n", me->name); |
| return -ENOEXEC; |
| } |
| |
| /* If we don't have a .toc, just use .stubs. We need to set r2 |
| to some reasonable value in case the module calls out to |
| other functions via a stub, or if a function pointer escapes |
| the module by some means. */ |
| if (!me->arch.toc_section) |
| me->arch.toc_section = me->arch.stubs_section; |
| |
| /* Override the stubs size */ |
| sechdrs[me->arch.stubs_section].sh_size = get_stubs_size(hdr, sechdrs); |
| return 0; |
| } |
| |
| int apply_relocate(Elf64_Shdr *sechdrs, |
| const char *strtab, |
| unsigned int symindex, |
| unsigned int relsec, |
| struct module *me) |
| { |
| printk(KERN_ERR "%s: Non-ADD RELOCATION unsupported\n", me->name); |
| return -ENOEXEC; |
| } |
| |
| /* r2 is the TOC pointer: it actually points 0x8000 into the TOC (this |
| gives the value maximum span in an instruction which uses a signed |
| offset) */ |
| static inline unsigned long my_r2(Elf64_Shdr *sechdrs, struct module *me) |
| { |
| return sechdrs[me->arch.toc_section].sh_addr + 0x8000; |
| } |
| |
| /* Both low and high 16 bits are added as SIGNED additions, so if low |
| 16 bits has high bit set, high 16 bits must be adjusted. These |
| macros do that (stolen from binutils). */ |
| #define PPC_LO(v) ((v) & 0xffff) |
| #define PPC_HI(v) (((v) >> 16) & 0xffff) |
| #define PPC_HA(v) PPC_HI ((v) + 0x8000) |
| |
| /* Patch stub to reference function and correct r2 value. */ |
| static inline int create_stub(Elf64_Shdr *sechdrs, |
| struct ppc64_stub_entry *entry, |
| struct ppc64_opd_entry *opd, |
| struct module *me) |
| { |
| Elf64_Half *loc1, *loc2; |
| long reladdr; |
| |
| *entry = ppc64_stub; |
| |
| loc1 = (Elf64_Half *)&entry->jump[2]; |
| loc2 = (Elf64_Half *)&entry->jump[6]; |
| |
| /* Stub uses address relative to r2. */ |
| reladdr = (unsigned long)entry - my_r2(sechdrs, me); |
| if (reladdr > 0x7FFFFFFF || reladdr < -(0x80000000L)) { |
| printk("%s: Address %p of stub out of range of %p.\n", |
| me->name, (void *)reladdr, (void *)my_r2); |
| return 0; |
| } |
| DEBUGP("Stub %p get data from reladdr %li\n", entry, reladdr); |
| |
| *loc1 = PPC_HA(reladdr); |
| *loc2 = PPC_LO(reladdr); |
| entry->opd.funcaddr = opd->funcaddr; |
| entry->opd.r2 = opd->r2; |
| return 1; |
| } |
| |
| /* Create stub to jump to function described in this OPD: we need the |
| stub to set up the TOC ptr (r2) for the function. */ |
| static unsigned long stub_for_addr(Elf64_Shdr *sechdrs, |
| unsigned long opdaddr, |
| struct module *me) |
| { |
| struct ppc64_stub_entry *stubs; |
| struct ppc64_opd_entry *opd = (void *)opdaddr; |
| unsigned int i, num_stubs; |
| |
| num_stubs = sechdrs[me->arch.stubs_section].sh_size / sizeof(*stubs); |
| |
| /* Find this stub, or if that fails, the next avail. entry */ |
| stubs = (void *)sechdrs[me->arch.stubs_section].sh_addr; |
| for (i = 0; stubs[i].opd.funcaddr; i++) { |
| BUG_ON(i >= num_stubs); |
| |
| if (stubs[i].opd.funcaddr == opd->funcaddr) |
| return (unsigned long)&stubs[i]; |
| } |
| |
| if (!create_stub(sechdrs, &stubs[i], opd, me)) |
| return 0; |
| |
| return (unsigned long)&stubs[i]; |
| } |
| |
| /* We expect a noop next: if it is, replace it with instruction to |
| restore r2. */ |
| static int restore_r2(u32 *instruction, struct module *me) |
| { |
| if (*instruction != PPC_NOP_INSTR) { |
| printk("%s: Expect noop after relocate, got %08x\n", |
| me->name, *instruction); |
| return 0; |
| } |
| *instruction = 0xe8410028; /* ld r2,40(r1) */ |
| return 1; |
| } |
| |
| int apply_relocate_add(Elf64_Shdr *sechdrs, |
| const char *strtab, |
| unsigned int symindex, |
| unsigned int relsec, |
| struct module *me) |
| { |
| unsigned int i; |
| Elf64_Rela *rela = (void *)sechdrs[relsec].sh_addr; |
| Elf64_Sym *sym; |
| unsigned long *location; |
| unsigned long value; |
| |
| DEBUGP("Applying ADD relocate section %u to %u\n", relsec, |
| sechdrs[relsec].sh_info); |
| for (i = 0; i < sechdrs[relsec].sh_size / sizeof(*rela); i++) { |
| /* This is where to make the change */ |
| location = (void *)sechdrs[sechdrs[relsec].sh_info].sh_addr |
| + rela[i].r_offset; |
| /* This is the symbol it is referring to */ |
| sym = (Elf64_Sym *)sechdrs[symindex].sh_addr |
| + ELF64_R_SYM(rela[i].r_info); |
| |
| DEBUGP("RELOC at %p: %li-type as %s (%lu) + %li\n", |
| location, (long)ELF64_R_TYPE(rela[i].r_info), |
| strtab + sym->st_name, (unsigned long)sym->st_value, |
| (long)rela[i].r_addend); |
| |
| /* `Everything is relative'. */ |
| value = sym->st_value + rela[i].r_addend; |
| |
| switch (ELF64_R_TYPE(rela[i].r_info)) { |
| case R_PPC64_ADDR32: |
| /* Simply set it */ |
| *(u32 *)location = value; |
| break; |
| |
| case R_PPC64_ADDR64: |
| /* Simply set it */ |
| *(unsigned long *)location = value; |
| break; |
| |
| case R_PPC64_TOC: |
| *(unsigned long *)location = my_r2(sechdrs, me); |
| break; |
| |
| case R_PPC64_TOC16: |
| /* Subtract TOC pointer */ |
| value -= my_r2(sechdrs, me); |
| if (value + 0x8000 > 0xffff) { |
| printk("%s: bad TOC16 relocation (%lu)\n", |
| me->name, value); |
| return -ENOEXEC; |
| } |
| *((uint16_t *) location) |
| = (*((uint16_t *) location) & ~0xffff) |
| | (value & 0xffff); |
| break; |
| |
| case R_PPC64_TOC16_DS: |
| /* Subtract TOC pointer */ |
| value -= my_r2(sechdrs, me); |
| if ((value & 3) != 0 || value + 0x8000 > 0xffff) { |
| printk("%s: bad TOC16_DS relocation (%lu)\n", |
| me->name, value); |
| return -ENOEXEC; |
| } |
| *((uint16_t *) location) |
| = (*((uint16_t *) location) & ~0xfffc) |
| | (value & 0xfffc); |
| break; |
| |
| case R_PPC_REL24: |
| /* FIXME: Handle weak symbols here --RR */ |
| if (sym->st_shndx == SHN_UNDEF) { |
| /* External: go via stub */ |
| value = stub_for_addr(sechdrs, value, me); |
| if (!value) |
| return -ENOENT; |
| if (!restore_r2((u32 *)location + 1, me)) |
| return -ENOEXEC; |
| } |
| |
| /* Convert value to relative */ |
| value -= (unsigned long)location; |
| if (value + 0x2000000 > 0x3ffffff || (value & 3) != 0){ |
| printk("%s: REL24 %li out of range!\n", |
| me->name, (long int)value); |
| return -ENOEXEC; |
| } |
| |
| /* Only replace bits 2 through 26 */ |
| *(uint32_t *)location |
| = (*(uint32_t *)location & ~0x03fffffc) |
| | (value & 0x03fffffc); |
| break; |
| |
| case R_PPC64_REL64: |
| /* 64 bits relative (used by features fixups) */ |
| *location = value - (unsigned long)location; |
| break; |
| |
| default: |
| printk("%s: Unknown ADD relocation: %lu\n", |
| me->name, |
| (unsigned long)ELF64_R_TYPE(rela[i].r_info)); |
| return -ENOEXEC; |
| } |
| } |
| |
| return 0; |
| } |
| |
| void *dereference_function_descriptor(void *ptr) |
| { |
| struct ppc64_opd_entry *desc = ptr; |
| void *p; |
| |
| if (!probe_kernel_address(&desc->funcaddr, p)) |
| ptr = p; |
| return ptr; |
| } |