| #ifndef _LINUX_TIME_H |
| #define _LINUX_TIME_H |
| |
| # include <linux/cache.h> |
| # include <linux/seqlock.h> |
| # include <linux/math64.h> |
| # include <linux/time64.h> |
| |
| extern struct timezone sys_tz; |
| |
| int get_timespec64(struct timespec64 *ts, |
| const struct timespec __user *uts); |
| int put_timespec64(const struct timespec64 *ts, |
| struct timespec __user *uts); |
| int get_itimerspec64(struct itimerspec64 *it, |
| const struct itimerspec __user *uit); |
| int put_itimerspec64(const struct itimerspec64 *it, |
| struct itimerspec __user *uit); |
| |
| #define TIME_T_MAX (time_t)((1UL << ((sizeof(time_t) << 3) - 1)) - 1) |
| |
| static inline int timespec_equal(const struct timespec *a, |
| const struct timespec *b) |
| { |
| return (a->tv_sec == b->tv_sec) && (a->tv_nsec == b->tv_nsec); |
| } |
| |
| /* |
| * lhs < rhs: return <0 |
| * lhs == rhs: return 0 |
| * lhs > rhs: return >0 |
| */ |
| static inline int timespec_compare(const struct timespec *lhs, const struct timespec *rhs) |
| { |
| if (lhs->tv_sec < rhs->tv_sec) |
| return -1; |
| if (lhs->tv_sec > rhs->tv_sec) |
| return 1; |
| return lhs->tv_nsec - rhs->tv_nsec; |
| } |
| |
| static inline int timeval_compare(const struct timeval *lhs, const struct timeval *rhs) |
| { |
| if (lhs->tv_sec < rhs->tv_sec) |
| return -1; |
| if (lhs->tv_sec > rhs->tv_sec) |
| return 1; |
| return lhs->tv_usec - rhs->tv_usec; |
| } |
| |
| extern time64_t mktime64(const unsigned int year, const unsigned int mon, |
| const unsigned int day, const unsigned int hour, |
| const unsigned int min, const unsigned int sec); |
| |
| /** |
| * Deprecated. Use mktime64(). |
| */ |
| static inline unsigned long mktime(const unsigned int year, |
| const unsigned int mon, const unsigned int day, |
| const unsigned int hour, const unsigned int min, |
| const unsigned int sec) |
| { |
| return mktime64(year, mon, day, hour, min, sec); |
| } |
| |
| extern void set_normalized_timespec(struct timespec *ts, time_t sec, s64 nsec); |
| |
| /* |
| * timespec_add_safe assumes both values are positive and checks |
| * for overflow. It will return TIME_T_MAX if the reutrn would be |
| * smaller then either of the arguments. |
| */ |
| extern struct timespec timespec_add_safe(const struct timespec lhs, |
| const struct timespec rhs); |
| |
| |
| static inline struct timespec timespec_add(struct timespec lhs, |
| struct timespec rhs) |
| { |
| struct timespec ts_delta; |
| set_normalized_timespec(&ts_delta, lhs.tv_sec + rhs.tv_sec, |
| lhs.tv_nsec + rhs.tv_nsec); |
| return ts_delta; |
| } |
| |
| /* |
| * sub = lhs - rhs, in normalized form |
| */ |
| static inline struct timespec timespec_sub(struct timespec lhs, |
| struct timespec rhs) |
| { |
| struct timespec ts_delta; |
| set_normalized_timespec(&ts_delta, lhs.tv_sec - rhs.tv_sec, |
| lhs.tv_nsec - rhs.tv_nsec); |
| return ts_delta; |
| } |
| |
| /* |
| * Returns true if the timespec is norm, false if denorm: |
| */ |
| static inline bool timespec_valid(const struct timespec *ts) |
| { |
| /* Dates before 1970 are bogus */ |
| if (ts->tv_sec < 0) |
| return false; |
| /* Can't have more nanoseconds then a second */ |
| if ((unsigned long)ts->tv_nsec >= NSEC_PER_SEC) |
| return false; |
| return true; |
| } |
| |
| static inline bool timespec_valid_strict(const struct timespec *ts) |
| { |
| if (!timespec_valid(ts)) |
| return false; |
| /* Disallow values that could overflow ktime_t */ |
| if ((unsigned long long)ts->tv_sec >= KTIME_SEC_MAX) |
| return false; |
| return true; |
| } |
| |
| static inline bool timeval_valid(const struct timeval *tv) |
| { |
| /* Dates before 1970 are bogus */ |
| if (tv->tv_sec < 0) |
| return false; |
| |
| /* Can't have more microseconds then a second */ |
| if (tv->tv_usec < 0 || tv->tv_usec >= USEC_PER_SEC) |
| return false; |
| |
| return true; |
| } |
| |
| extern struct timespec timespec_trunc(struct timespec t, unsigned gran); |
| |
| /* |
| * Validates if a timespec/timeval used to inject a time offset is valid. |
| * Offsets can be postive or negative. The value of the timeval/timespec |
| * is the sum of its fields, but *NOTE*: the field tv_usec/tv_nsec must |
| * always be non-negative. |
| */ |
| static inline bool timeval_inject_offset_valid(const struct timeval *tv) |
| { |
| /* We don't check the tv_sec as it can be positive or negative */ |
| |
| /* Can't have more microseconds then a second */ |
| if (tv->tv_usec < 0 || tv->tv_usec >= USEC_PER_SEC) |
| return false; |
| return true; |
| } |
| |
| static inline bool timespec_inject_offset_valid(const struct timespec *ts) |
| { |
| /* We don't check the tv_sec as it can be positive or negative */ |
| |
| /* Can't have more nanoseconds then a second */ |
| if (ts->tv_nsec < 0 || ts->tv_nsec >= NSEC_PER_SEC) |
| return false; |
| return true; |
| } |
| |
| /* Some architectures do not supply their own clocksource. |
| * This is mainly the case in architectures that get their |
| * inter-tick times by reading the counter on their interval |
| * timer. Since these timers wrap every tick, they're not really |
| * useful as clocksources. Wrapping them to act like one is possible |
| * but not very efficient. So we provide a callout these arches |
| * can implement for use with the jiffies clocksource to provide |
| * finer then tick granular time. |
| */ |
| #ifdef CONFIG_ARCH_USES_GETTIMEOFFSET |
| extern u32 (*arch_gettimeoffset)(void); |
| #endif |
| |
| struct itimerval; |
| extern int do_setitimer(int which, struct itimerval *value, |
| struct itimerval *ovalue); |
| extern int do_getitimer(int which, struct itimerval *value); |
| |
| extern long do_utimes(int dfd, const char __user *filename, struct timespec64 *times, int flags); |
| |
| /* |
| * Similar to the struct tm in userspace <time.h>, but it needs to be here so |
| * that the kernel source is self contained. |
| */ |
| struct tm { |
| /* |
| * the number of seconds after the minute, normally in the range |
| * 0 to 59, but can be up to 60 to allow for leap seconds |
| */ |
| int tm_sec; |
| /* the number of minutes after the hour, in the range 0 to 59*/ |
| int tm_min; |
| /* the number of hours past midnight, in the range 0 to 23 */ |
| int tm_hour; |
| /* the day of the month, in the range 1 to 31 */ |
| int tm_mday; |
| /* the number of months since January, in the range 0 to 11 */ |
| int tm_mon; |
| /* the number of years since 1900 */ |
| long tm_year; |
| /* the number of days since Sunday, in the range 0 to 6 */ |
| int tm_wday; |
| /* the number of days since January 1, in the range 0 to 365 */ |
| int tm_yday; |
| }; |
| |
| void time64_to_tm(time64_t totalsecs, int offset, struct tm *result); |
| |
| /** |
| * time_to_tm - converts the calendar time to local broken-down time |
| * |
| * @totalsecs the number of seconds elapsed since 00:00:00 on January 1, 1970, |
| * Coordinated Universal Time (UTC). |
| * @offset offset seconds adding to totalsecs. |
| * @result pointer to struct tm variable to receive broken-down time |
| */ |
| static inline void time_to_tm(time_t totalsecs, int offset, struct tm *result) |
| { |
| time64_to_tm(totalsecs, offset, result); |
| } |
| |
| /** |
| * timespec_to_ns - Convert timespec to nanoseconds |
| * @ts: pointer to the timespec variable to be converted |
| * |
| * Returns the scalar nanosecond representation of the timespec |
| * parameter. |
| */ |
| static inline s64 timespec_to_ns(const struct timespec *ts) |
| { |
| return ((s64) ts->tv_sec * NSEC_PER_SEC) + ts->tv_nsec; |
| } |
| |
| /** |
| * timeval_to_ns - Convert timeval to nanoseconds |
| * @ts: pointer to the timeval variable to be converted |
| * |
| * Returns the scalar nanosecond representation of the timeval |
| * parameter. |
| */ |
| static inline s64 timeval_to_ns(const struct timeval *tv) |
| { |
| return ((s64) tv->tv_sec * NSEC_PER_SEC) + |
| tv->tv_usec * NSEC_PER_USEC; |
| } |
| |
| /** |
| * ns_to_timespec - Convert nanoseconds to timespec |
| * @nsec: the nanoseconds value to be converted |
| * |
| * Returns the timespec representation of the nsec parameter. |
| */ |
| extern struct timespec ns_to_timespec(const s64 nsec); |
| |
| /** |
| * ns_to_timeval - Convert nanoseconds to timeval |
| * @nsec: the nanoseconds value to be converted |
| * |
| * Returns the timeval representation of the nsec parameter. |
| */ |
| extern struct timeval ns_to_timeval(const s64 nsec); |
| |
| /** |
| * timespec_add_ns - Adds nanoseconds to a timespec |
| * @a: pointer to timespec to be incremented |
| * @ns: unsigned nanoseconds value to be added |
| * |
| * This must always be inlined because its used from the x86-64 vdso, |
| * which cannot call other kernel functions. |
| */ |
| static __always_inline void timespec_add_ns(struct timespec *a, u64 ns) |
| { |
| a->tv_sec += __iter_div_u64_rem(a->tv_nsec + ns, NSEC_PER_SEC, &ns); |
| a->tv_nsec = ns; |
| } |
| |
| static inline bool itimerspec64_valid(const struct itimerspec64 *its) |
| { |
| if (!timespec64_valid(&(its->it_interval)) || |
| !timespec64_valid(&(its->it_value))) |
| return false; |
| |
| return true; |
| } |
| |
| #endif |