arch/arm/plat-s3c24xx/s3c2443-clock.c - LeafOS-Devices/android_kernel_samsung_gta4xl - Gitiles

 /* linux/arch/arm/plat-s3c24xx/s3c2443-clock.c
  *
  * Copyright (c) 2007, 2010 Simtec Electronics
  *	Ben Dooks <ben@simtec.co.uk>
  *
  * S3C2443 Clock control suport - common code
  */

 #include <linux/init.h>
 #include <linux/clk.h>
 #include <linux/io.h>

 #include <mach/regs-s3c2443-clock.h>

 #include <plat/s3c2443.h>
 #include <plat/clock.h>
 #include <plat/clock-clksrc.h>
 #include <plat/cpu.h>

 #include <plat/cpu-freq.h>


 static int s3c2443_gate(void __iomem *reg, struct clk *clk, int enable)
 {
 	u32 ctrlbit = clk->ctrlbit;
 	u32 con = __raw_readl(reg);

 	if (enable)
 		con |= ctrlbit;
 	else
 		con &= ~ctrlbit;

 	__raw_writel(con, reg);
 	return 0;
 }

 int s3c2443_clkcon_enable_h(struct clk *clk, int enable)
 {
 	return s3c2443_gate(S3C2443_HCLKCON, clk, enable);
 }

 int s3c2443_clkcon_enable_p(struct clk *clk, int enable)
 {
 	return s3c2443_gate(S3C2443_PCLKCON, clk, enable);
 }

 int s3c2443_clkcon_enable_s(struct clk *clk, int enable)
 {
 	return s3c2443_gate(S3C2443_SCLKCON, clk, enable);
 }

 /* mpllref is a direct descendant of clk_xtal by default, but it is not
  * elided as the EPLL can be either sourced by the XTAL or EXTCLK and as
  * such directly equating the two source clocks is impossible.
  */
 struct clk clk_mpllref = {
 	.name		= "mpllref",
 	.parent		= &clk_xtal,
 };

 static struct clk *clk_epllref_sources[] = {
 	[0] = &clk_mpllref,
 	[1] = &clk_mpllref,
 	[2] = &clk_xtal,
 	[3] = &clk_ext,
 };

 struct clksrc_clk clk_epllref = {
 	.clk	= {
 		.name		= "epllref",
 	},
 	.sources = &(struct clksrc_sources) {
 		.sources = clk_epllref_sources,
 		.nr_sources = ARRAY_SIZE(clk_epllref_sources),
 	},
 	.reg_src = { .reg = S3C2443_CLKSRC, .size = 2, .shift = 7 },
 };

 /* esysclk
  *
  * this is sourced from either the EPLL or the EPLLref clock
 */

 static struct clk *clk_sysclk_sources[] = {
 	[0] = &clk_epllref.clk,
 	[1] = &clk_epll,
 };

 struct clksrc_clk clk_esysclk = {
 	.clk	= {
 		.name		= "esysclk",
 		.parent		= &clk_epll,
 	},
 	.sources = &(struct clksrc_sources) {
 		.sources = clk_sysclk_sources,
 		.nr_sources = ARRAY_SIZE(clk_sysclk_sources),
 	},
 	.reg_src = { .reg = S3C2443_CLKSRC, .size = 1, .shift = 6 },
 };

 static unsigned long s3c2443_getrate_mdivclk(struct clk *clk)
 {
 	unsigned long parent_rate = clk_get_rate(clk->parent);
 	unsigned long div = __raw_readl(S3C2443_CLKDIV0);

 	div  &= S3C2443_CLKDIV0_EXTDIV_MASK;
 	div >>= (S3C2443_CLKDIV0_EXTDIV_SHIFT-1);	/* x2 */

 	return parent_rate / (div + 1);
 }

 static struct clk clk_mdivclk = {
 	.name		= "mdivclk",
 	.parent		= &clk_mpllref,
 	.ops		= &(struct clk_ops) {
 		.get_rate	= s3c2443_getrate_mdivclk,
 	},
 };

 static struct clk *clk_msysclk_sources[] = {
 	[0] = &clk_mpllref,
 	[1] = &clk_mpll,
 	[2] = &clk_mdivclk,
 	[3] = &clk_mpllref,
 };

 struct clksrc_clk clk_msysclk = {
 	.clk	= {
 		.name		= "msysclk",
 		.parent		= &clk_xtal,
 	},
 	.sources = &(struct clksrc_sources) {
 		.sources = clk_msysclk_sources,
 		.nr_sources = ARRAY_SIZE(clk_msysclk_sources),
 	},
 	.reg_src = { .reg = S3C2443_CLKSRC, .size = 2, .shift = 3 },
 };

 /* prediv
  *
  * this divides the msysclk down to pass to h/p/etc.
  */

 static unsigned long s3c2443_prediv_getrate(struct clk *clk)
 {
 	unsigned long rate = clk_get_rate(clk->parent);
 	unsigned long clkdiv0 = __raw_readl(S3C2443_CLKDIV0);

 	clkdiv0 &= S3C2443_CLKDIV0_PREDIV_MASK;
 	clkdiv0 >>= S3C2443_CLKDIV0_PREDIV_SHIFT;

 	return rate / (clkdiv0 + 1);
 }

 static struct clk clk_prediv = {
 	.name		= "prediv",
 	.parent		= &clk_msysclk.clk,
 	.ops		= &(struct clk_ops) {
 		.get_rate	= s3c2443_prediv_getrate,
 	},
 };

 /* armdiv
  *
  * this clock is sourced from msysclk and can have a number of
  * divider values applied to it to then be fed into armclk.
 */

 static unsigned int *armdiv;
 static int nr_armdiv;
 static int armdivmask;

 static unsigned long s3c2443_armclk_roundrate(struct clk *clk,
 					      unsigned long rate)
 {
 	unsigned long parent = clk_get_rate(clk->parent);
 	unsigned long calc;
 	unsigned best = 256; /* bigger than any value */
 	unsigned div;
 	int ptr;

 	for (ptr = 0; ptr < nr_armdiv; ptr++) {
 		div = armdiv[ptr];
 		calc = parent / div;
 		if (calc <= rate && div < best)
 			best = div;
 	}

 	return parent / best;
 }

 static int s3c2443_armclk_setrate(struct clk *clk, unsigned long rate)
 {
 	unsigned long parent = clk_get_rate(clk->parent);
 	unsigned long calc;
 	unsigned div;
 	unsigned best = 256; /* bigger than any value */
 	int ptr;
 	int val = -1;

 	for (ptr = 0; ptr < nr_armdiv; ptr++) {
 		div = armdiv[ptr];
 		calc = parent / div;
 		if (calc <= rate && div < best) {
 			best = div;
 			val = ptr;
 		}
 	}

 	if (val >= 0) {
 		unsigned long clkcon0;

 		clkcon0 = __raw_readl(S3C2443_CLKDIV0);
 		clkcon0 &= ~armdivmask;
 		clkcon0 |= val << S3C2443_CLKDIV0_ARMDIV_SHIFT;
 		__raw_writel(clkcon0, S3C2443_CLKDIV0);
 	}

 	return (val == -1) ? -EINVAL : 0;
 }

 static struct clk clk_armdiv = {
 	.name		= "armdiv",
 	.parent		= &clk_msysclk.clk,
 	.ops		= &(struct clk_ops) {
 		.round_rate = s3c2443_armclk_roundrate,
 		.set_rate = s3c2443_armclk_setrate,
 	},
 };

 /* armclk
  *
  * this is the clock fed into the ARM core itself, from armdiv or from hclk.
  */

 static struct clk *clk_arm_sources[] = {
 	[0] = &clk_armdiv,
 	[1] = &clk_h,
 };

 static struct clksrc_clk clk_arm = {
 	.clk	= {
 		.name		= "armclk",
 	},
 	.sources = &(struct clksrc_sources) {
 		.sources = clk_arm_sources,
 		.nr_sources = ARRAY_SIZE(clk_arm_sources),
 	},
 	.reg_src = { .reg = S3C2443_CLKDIV0, .size = 1, .shift = 13 },
 };

 /* usbhost
  *
  * usb host bus-clock, usually 48MHz to provide USB bus clock timing
 */

 static struct clksrc_clk clk_usb_bus_host = {
 	.clk	= {
 		.name		= "usb-bus-host-parent",
 		.parent		= &clk_esysclk.clk,
 		.ctrlbit	= S3C2443_SCLKCON_USBHOST,
 		.enable		= s3c2443_clkcon_enable_s,
 	},
 	.reg_div = { .reg = S3C2443_CLKDIV1, .size = 2, .shift = 4 },
 };

 /* common clksrc clocks */

 static struct clksrc_clk clksrc_clks[] = {
 	{
 		/* ART baud-rate clock sourced from esysclk via a divisor */
 		.clk	= {
 			.name		= "uartclk",
 			.parent		= &clk_esysclk.clk,
 		},
 		.reg_div = { .reg = S3C2443_CLKDIV1, .size = 4, .shift = 8 },
 	}, {
 		/* camera interface bus-clock, divided down from esysclk */
 		.clk	= {
 			.name		= "camif-upll",	/* same as 2440 name */
 			.parent		= &clk_esysclk.clk,
 			.ctrlbit	= S3C2443_SCLKCON_CAMCLK,
 			.enable		= s3c2443_clkcon_enable_s,
 		},
 		.reg_div = { .reg = S3C2443_CLKDIV1, .size = 4, .shift = 26 },
 	}, {
 		.clk	= {
 			.name		= "display-if",
 			.parent		= &clk_esysclk.clk,
 			.ctrlbit	= S3C2443_SCLKCON_DISPCLK,
 			.enable		= s3c2443_clkcon_enable_s,
 		},
 		.reg_div = { .reg = S3C2443_CLKDIV1, .size = 8, .shift = 16 },
 	},
 };

 static struct clk clk_i2s_ext = {
 	.name		= "i2s-ext",
 };

 /* i2s_eplldiv
  *
  * This clock is the output from the I2S divisor of ESYSCLK, and is separate
  * from the mux that comes after it (cannot merge into one single clock)
 */

 static struct clksrc_clk clk_i2s_eplldiv = {
 	.clk	= {
 		.name		= "i2s-eplldiv",
 		.parent		= &clk_esysclk.clk,
 	},
 	.reg_div = { .reg = S3C2443_CLKDIV1, .size = 4, .shift = 12, },
 };

 /* i2s-ref
  *
  * i2s bus reference clock, selectable from external, esysclk or epllref
  *
  * Note, this used to be two clocks, but was compressed into one.
 */

 static struct clk *clk_i2s_srclist[] = {
 	[0] = &clk_i2s_eplldiv.clk,
 	[1] = &clk_i2s_ext,
 	[2] = &clk_epllref.clk,
 	[3] = &clk_epllref.clk,
 };

 static struct clksrc_clk clk_i2s = {
 	.clk	= {
 		.name		= "i2s-if",
 		.ctrlbit	= S3C2443_SCLKCON_I2SCLK,
 		.enable		= s3c2443_clkcon_enable_s,

 	},
 	.sources = &(struct clksrc_sources) {
 		.sources = clk_i2s_srclist,
 		.nr_sources = ARRAY_SIZE(clk_i2s_srclist),
 	},
 	.reg_src = { .reg = S3C2443_CLKSRC, .size = 2, .shift = 14 },
 };

 static struct clk init_clocks_off[] = {
 	{
 		.name		= "iis",
 		.parent		= &clk_p,
 		.enable		= s3c2443_clkcon_enable_p,
 		.ctrlbit	= S3C2443_PCLKCON_IIS,
 	}, {
 		.name		= "hsspi",
 		.parent		= &clk_p,
 		.enable		= s3c2443_clkcon_enable_p,
 		.ctrlbit	= S3C2443_PCLKCON_HSSPI,
 	}, {
 		.name		= "adc",
 		.parent		= &clk_p,
 		.enable		= s3c2443_clkcon_enable_p,
 		.ctrlbit	= S3C2443_PCLKCON_ADC,
 	}, {
 		.name		= "i2c",
 		.parent		= &clk_p,
 		.enable		= s3c2443_clkcon_enable_p,
 		.ctrlbit	= S3C2443_PCLKCON_IIC,
 	}
 };

 static struct clk init_clocks[] = {
 	{
 		.name		= "dma",
 		.parent		= &clk_h,
 		.enable		= s3c2443_clkcon_enable_h,
 		.ctrlbit	= S3C2443_HCLKCON_DMA0,
 	}, {
 		.name		= "dma",
 		.parent		= &clk_h,
 		.enable		= s3c2443_clkcon_enable_h,
 		.ctrlbit	= S3C2443_HCLKCON_DMA1,
 	}, {
 		.name		= "dma",
 		.parent		= &clk_h,
 		.enable		= s3c2443_clkcon_enable_h,
 		.ctrlbit	= S3C2443_HCLKCON_DMA2,
 	}, {
 		.name		= "dma",
 		.parent		= &clk_h,
 		.enable		= s3c2443_clkcon_enable_h,
 		.ctrlbit	= S3C2443_HCLKCON_DMA3,
 	}, {
 		.name		= "dma",
 		.parent		= &clk_h,
 		.enable		= s3c2443_clkcon_enable_h,
 		.ctrlbit	= S3C2443_HCLKCON_DMA4,
 	}, {
 		.name		= "dma",
 		.parent		= &clk_h,
 		.enable		= s3c2443_clkcon_enable_h,
 		.ctrlbit	= S3C2443_HCLKCON_DMA5,
 	}, {
 		.name		= "hsmmc",
 		.parent		= &clk_h,
 		.enable		= s3c2443_clkcon_enable_h,
 		.ctrlbit	= S3C2443_HCLKCON_HSMMC,
 	}, {
 		.name		= "gpio",
 		.parent		= &clk_p,
 		.enable		= s3c2443_clkcon_enable_p,
 		.ctrlbit	= S3C2443_PCLKCON_GPIO,
 	}, {
 		.name		= "usb-host",
 		.parent		= &clk_h,
 		.enable		= s3c2443_clkcon_enable_h,
 		.ctrlbit	= S3C2443_HCLKCON_USBH,
 	}, {
 		.name		= "usb-device",
 		.parent		= &clk_h,
 		.enable		= s3c2443_clkcon_enable_h,
 		.ctrlbit	= S3C2443_HCLKCON_USBD,
 	}, {
 		.name		= "lcd",
 		.parent		= &clk_h,
 		.enable		= s3c2443_clkcon_enable_h,
 		.ctrlbit	= S3C2443_HCLKCON_LCDC,

 	}, {
 		.name		= "timers",
 		.parent		= &clk_p,
 		.enable		= s3c2443_clkcon_enable_p,
 		.ctrlbit	= S3C2443_PCLKCON_PWMT,
 	}, {
 		.name		= "cfc",
 		.parent		= &clk_h,
 		.enable		= s3c2443_clkcon_enable_h,
 		.ctrlbit	= S3C2443_HCLKCON_CFC,
 	}, {
 		.name		= "ssmc",
 		.parent		= &clk_h,
 		.enable		= s3c2443_clkcon_enable_h,
 		.ctrlbit	= S3C2443_HCLKCON_SSMC,
 	}, {
 		.name		= "uart",
 		.devname	= "s3c2440-uart.0",
 		.parent		= &clk_p,
 		.enable		= s3c2443_clkcon_enable_p,
 		.ctrlbit	= S3C2443_PCLKCON_UART0,
 	}, {
 		.name		= "uart",
 		.devname	= "s3c2440-uart.1",
 		.parent		= &clk_p,
 		.enable		= s3c2443_clkcon_enable_p,
 		.ctrlbit	= S3C2443_PCLKCON_UART1,
 	}, {
 		.name		= "uart",
 		.devname	= "s3c2440-uart.2",
 		.parent		= &clk_p,
 		.enable		= s3c2443_clkcon_enable_p,
 		.ctrlbit	= S3C2443_PCLKCON_UART2,
 	}, {
 		.name		= "uart",
 		.devname	= "s3c2440-uart.3",
 		.parent		= &clk_p,
 		.enable		= s3c2443_clkcon_enable_p,
 		.ctrlbit	= S3C2443_PCLKCON_UART3,
 	}, {
 		.name		= "rtc",
 		.parent		= &clk_p,
 		.enable		= s3c2443_clkcon_enable_p,
 		.ctrlbit	= S3C2443_PCLKCON_RTC,
 	}, {
 		.name		= "watchdog",
 		.parent		= &clk_p,
 		.ctrlbit	= S3C2443_PCLKCON_WDT,
 	}, {
 		.name		= "ac97",
 		.parent		= &clk_p,
 		.ctrlbit	= S3C2443_PCLKCON_AC97,
 	}, {
 		.name		= "nand",
 		.parent		= &clk_h,
 	}, {
 		.name		= "usb-bus-host",
 		.parent		= &clk_usb_bus_host.clk,
 	}
 };

 static inline unsigned long s3c2443_get_hdiv(unsigned long clkcon0)
 {
 	clkcon0 &= S3C2443_CLKDIV0_HCLKDIV_MASK;

 	return clkcon0 + 1;
 }

 /* EPLLCON compatible enough to get on/off information */

 void __init_or_cpufreq s3c2443_common_setup_clocks(pll_fn get_mpll,
 						   fdiv_fn get_fdiv)
 {
 	unsigned long epllcon = __raw_readl(S3C2443_EPLLCON);
 	unsigned long mpllcon = __raw_readl(S3C2443_MPLLCON);
 	unsigned long clkdiv0 = __raw_readl(S3C2443_CLKDIV0);
 	struct clk *xtal_clk;
 	unsigned long xtal;
 	unsigned long pll;
 	unsigned long fclk;
 	unsigned long hclk;
 	unsigned long pclk;
 	int ptr;

 	xtal_clk = clk_get(NULL, "xtal");
 	xtal = clk_get_rate(xtal_clk);
 	clk_put(xtal_clk);

 	pll = get_mpll(mpllcon, xtal);
 	clk_msysclk.clk.rate = pll;

 	fclk = pll / get_fdiv(clkdiv0);
 	hclk = s3c2443_prediv_getrate(&clk_prediv);
 	hclk /= s3c2443_get_hdiv(clkdiv0);
 	pclk = hclk / ((clkdiv0 & S3C2443_CLKDIV0_HALF_PCLK) ? 2 : 1);

 	s3c24xx_setup_clocks(fclk, hclk, pclk);

 	printk("CPU: MPLL %s %ld.%03ld MHz, cpu %ld.%03ld MHz, mem %ld.%03ld MHz, pclk %ld.%03ld MHz\n",
 	       (mpllcon & S3C2443_PLLCON_OFF) ? "off":"on",
 	       print_mhz(pll), print_mhz(fclk),
 	       print_mhz(hclk), print_mhz(pclk));

 	for (ptr = 0; ptr < ARRAY_SIZE(clksrc_clks); ptr++)
 		s3c_set_clksrc(&clksrc_clks[ptr], true);

 	/* ensure usb bus clock is within correct rate of 48MHz */

 	if (clk_get_rate(&clk_usb_bus_host.clk) != (48 * 1000 * 1000)) {
 		printk(KERN_INFO "Warning: USB host bus not at 48MHz\n");
 		clk_set_rate(&clk_usb_bus_host.clk, 48*1000*1000);
 	}

 	printk("CPU: EPLL %s %ld.%03ld MHz, usb-bus %ld.%03ld MHz\n",
 	       (epllcon & S3C2443_PLLCON_OFF) ? "off":"on",
 	       print_mhz(clk_get_rate(&clk_epll)),
 	       print_mhz(clk_get_rate(&clk_usb_bus)));
 }

 static struct clk *clks[] __initdata = {
 	&clk_prediv,
 	&clk_mpllref,
 	&clk_mdivclk,
 	&clk_ext,
 	&clk_epll,
 	&clk_usb_bus,
 	&clk_armdiv,
 };

 static struct clksrc_clk *clksrcs[] __initdata = {
 	&clk_i2s_eplldiv,
 	&clk_i2s,
 	&clk_usb_bus_host,
 	&clk_epllref,
 	&clk_esysclk,
 	&clk_msysclk,
 	&clk_arm,
 };

 void __init s3c2443_common_init_clocks(int xtal, pll_fn get_mpll,
 				       fdiv_fn get_fdiv,
 				       unsigned int *divs, int nr_divs,
 				       int divmask)
 {
 	int ptr;

 	armdiv = divs;
 	nr_armdiv = nr_divs;
 	armdivmask = divmask;

 	/* s3c2443 parents h and p clocks from prediv */
 	clk_h.parent = &clk_prediv;
 	clk_p.parent = &clk_prediv;

 	clk_usb_bus.parent = &clk_usb_bus_host.clk;
 	clk_epll.parent = &clk_epllref.clk;

 	s3c24xx_register_baseclocks(xtal);
 	s3c24xx_register_clocks(clks, ARRAY_SIZE(clks));

 	for (ptr = 0; ptr < ARRAY_SIZE(clksrcs); ptr++)
 		s3c_register_clksrc(clksrcs[ptr], 1);

 	s3c_register_clksrc(clksrc_clks, ARRAY_SIZE(clksrc_clks));
 	s3c_register_clocks(init_clocks, ARRAY_SIZE(init_clocks));

 	/* See s3c2443/etc notes on disabling clocks at init time */
 	s3c_register_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
 	s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));

 	s3c2443_common_setup_clocks(get_mpll, get_fdiv);
 }
	/* linux/arch/arm/plat-s3c24xx/s3c2443-clock.c
	*
	* Copyright (c) 2007, 2010 Simtec Electronics
	* Ben Dooks <ben@simtec.co.uk>
	*
	* S3C2443 Clock control suport - common code
	*/

	#include <linux/init.h>
	#include <linux/clk.h>
	#include <linux/io.h>

	#include <mach/regs-s3c2443-clock.h>

	#include <plat/s3c2443.h>
	#include <plat/clock.h>
	#include <plat/clock-clksrc.h>
	#include <plat/cpu.h>

	#include <plat/cpu-freq.h>


	static int s3c2443_gate(void __iomem reg, struct clk clk, int enable)
	{
	u32 ctrlbit = clk->ctrlbit;
	u32 con = __raw_readl(reg);

	if (enable)
	con \|= ctrlbit;
	else
	con &= ~ctrlbit;

	__raw_writel(con, reg);
	return 0;
	}

	int s3c2443_clkcon_enable_h(struct clk *clk, int enable)
	{
	return s3c2443_gate(S3C2443_HCLKCON, clk, enable);
	}

	int s3c2443_clkcon_enable_p(struct clk *clk, int enable)
	{
	return s3c2443_gate(S3C2443_PCLKCON, clk, enable);
	}

	int s3c2443_clkcon_enable_s(struct clk *clk, int enable)
	{
	return s3c2443_gate(S3C2443_SCLKCON, clk, enable);
	}

	/* mpllref is a direct descendant of clk_xtal by default, but it is not
	* elided as the EPLL can be either sourced by the XTAL or EXTCLK and as
	* such directly equating the two source clocks is impossible.
	*/
	struct clk clk_mpllref = {
	.name = "mpllref",
	.parent = &clk_xtal,
	};

	static struct clk *clk_epllref_sources[] = {
	[0] = &clk_mpllref,
	[1] = &clk_mpllref,
	[2] = &clk_xtal,
	[3] = &clk_ext,
	};

	struct clksrc_clk clk_epllref = {
	.clk = {
	.name = "epllref",
	},
	.sources = &(struct clksrc_sources) {
	.sources = clk_epllref_sources,
	.nr_sources = ARRAY_SIZE(clk_epllref_sources),
	},
	.reg_src = { .reg = S3C2443_CLKSRC, .size = 2, .shift = 7 },
	};

	/* esysclk
	*
	* this is sourced from either the EPLL or the EPLLref clock
	*/

	static struct clk *clk_sysclk_sources[] = {
	[0] = &clk_epllref.clk,
	[1] = &clk_epll,
	};

	struct clksrc_clk clk_esysclk = {
	.clk = {
	.name = "esysclk",
	.parent = &clk_epll,
	},
	.sources = &(struct clksrc_sources) {
	.sources = clk_sysclk_sources,
	.nr_sources = ARRAY_SIZE(clk_sysclk_sources),
	},
	.reg_src = { .reg = S3C2443_CLKSRC, .size = 1, .shift = 6 },
	};

	static unsigned long s3c2443_getrate_mdivclk(struct clk *clk)
	{
	unsigned long parent_rate = clk_get_rate(clk->parent);
	unsigned long div = __raw_readl(S3C2443_CLKDIV0);

	div &= S3C2443_CLKDIV0_EXTDIV_MASK;
	div >>= (S3C2443_CLKDIV0_EXTDIV_SHIFT-1); /* x2 */

	return parent_rate / (div + 1);
	}

	static struct clk clk_mdivclk = {
	.name = "mdivclk",
	.parent = &clk_mpllref,
	.ops = &(struct clk_ops) {
	.get_rate = s3c2443_getrate_mdivclk,
	},
	};

	static struct clk *clk_msysclk_sources[] = {
	[0] = &clk_mpllref,
	[1] = &clk_mpll,
	[2] = &clk_mdivclk,
	[3] = &clk_mpllref,
	};

	struct clksrc_clk clk_msysclk = {
	.clk = {
	.name = "msysclk",
	.parent = &clk_xtal,
	},
	.sources = &(struct clksrc_sources) {
	.sources = clk_msysclk_sources,
	.nr_sources = ARRAY_SIZE(clk_msysclk_sources),
	},
	.reg_src = { .reg = S3C2443_CLKSRC, .size = 2, .shift = 3 },
	};

	/* prediv
	*
	* this divides the msysclk down to pass to h/p/etc.
	*/

	static unsigned long s3c2443_prediv_getrate(struct clk *clk)
	{
	unsigned long rate = clk_get_rate(clk->parent);
	unsigned long clkdiv0 = __raw_readl(S3C2443_CLKDIV0);

	clkdiv0 &= S3C2443_CLKDIV0_PREDIV_MASK;
	clkdiv0 >>= S3C2443_CLKDIV0_PREDIV_SHIFT;

	return rate / (clkdiv0 + 1);
	}

	static struct clk clk_prediv = {
	.name = "prediv",
	.parent = &clk_msysclk.clk,
	.ops = &(struct clk_ops) {
	.get_rate = s3c2443_prediv_getrate,
	},
	};

	/* armdiv
	*
	* this clock is sourced from msysclk and can have a number of
	* divider values applied to it to then be fed into armclk.
	*/

	static unsigned int *armdiv;
	static int nr_armdiv;
	static int armdivmask;

	static unsigned long s3c2443_armclk_roundrate(struct clk *clk,
	unsigned long rate)
	{
	unsigned long parent = clk_get_rate(clk->parent);
	unsigned long calc;
	unsigned best = 256; /* bigger than any value */
	unsigned div;
	int ptr;

	for (ptr = 0; ptr < nr_armdiv; ptr++) {
	div = armdiv[ptr];
	calc = parent / div;
	if (calc <= rate && div < best)
	best = div;
	}

	return parent / best;
	}

	static int s3c2443_armclk_setrate(struct clk *clk, unsigned long rate)
	{
	unsigned long parent = clk_get_rate(clk->parent);
	unsigned long calc;
	unsigned div;
	unsigned best = 256; /* bigger than any value */
	int ptr;
	int val = -1;

	for (ptr = 0; ptr < nr_armdiv; ptr++) {
	div = armdiv[ptr];
	calc = parent / div;
	if (calc <= rate && div < best) {
	best = div;
	val = ptr;
	}
	}

	if (val >= 0) {
	unsigned long clkcon0;

	clkcon0 = __raw_readl(S3C2443_CLKDIV0);
	clkcon0 &= ~armdivmask;
	clkcon0 \|= val << S3C2443_CLKDIV0_ARMDIV_SHIFT;
	__raw_writel(clkcon0, S3C2443_CLKDIV0);
	}

	return (val == -1) ? -EINVAL : 0;
	}

	static struct clk clk_armdiv = {
	.name = "armdiv",
	.parent = &clk_msysclk.clk,
	.ops = &(struct clk_ops) {
	.round_rate = s3c2443_armclk_roundrate,
	.set_rate = s3c2443_armclk_setrate,
	},
	};

	/* armclk
	*
	* this is the clock fed into the ARM core itself, from armdiv or from hclk.
	*/

	static struct clk *clk_arm_sources[] = {
	[0] = &clk_armdiv,
	[1] = &clk_h,
	};

	static struct clksrc_clk clk_arm = {
	.clk = {
	.name = "armclk",
	},
	.sources = &(struct clksrc_sources) {
	.sources = clk_arm_sources,
	.nr_sources = ARRAY_SIZE(clk_arm_sources),
	},
	.reg_src = { .reg = S3C2443_CLKDIV0, .size = 1, .shift = 13 },
	};

	/* usbhost
	*
	* usb host bus-clock, usually 48MHz to provide USB bus clock timing
	*/

	static struct clksrc_clk clk_usb_bus_host = {
	.clk = {
	.name = "usb-bus-host-parent",
	.parent = &clk_esysclk.clk,
	.ctrlbit = S3C2443_SCLKCON_USBHOST,
	.enable = s3c2443_clkcon_enable_s,
	},
	.reg_div = { .reg = S3C2443_CLKDIV1, .size = 2, .shift = 4 },
	};

	/* common clksrc clocks */

	static struct clksrc_clk clksrc_clks[] = {
	{
	/* ART baud-rate clock sourced from esysclk via a divisor */
	.clk = {
	.name = "uartclk",
	.parent = &clk_esysclk.clk,
	},
	.reg_div = { .reg = S3C2443_CLKDIV1, .size = 4, .shift = 8 },
	}, {
	/* camera interface bus-clock, divided down from esysclk */
	.clk = {
	.name = "camif-upll", /* same as 2440 name */
	.parent = &clk_esysclk.clk,
	.ctrlbit = S3C2443_SCLKCON_CAMCLK,
	.enable = s3c2443_clkcon_enable_s,
	},
	.reg_div = { .reg = S3C2443_CLKDIV1, .size = 4, .shift = 26 },
	}, {
	.clk = {
	.name = "display-if",
	.parent = &clk_esysclk.clk,
	.ctrlbit = S3C2443_SCLKCON_DISPCLK,
	.enable = s3c2443_clkcon_enable_s,
	},
	.reg_div = { .reg = S3C2443_CLKDIV1, .size = 8, .shift = 16 },
	},
	};

	static struct clk clk_i2s_ext = {
	.name = "i2s-ext",
	};

	/* i2s_eplldiv
	*
	* This clock is the output from the I2S divisor of ESYSCLK, and is separate
	* from the mux that comes after it (cannot merge into one single clock)
	*/

	static struct clksrc_clk clk_i2s_eplldiv = {
	.clk = {
	.name = "i2s-eplldiv",
	.parent = &clk_esysclk.clk,
	},
	.reg_div = { .reg = S3C2443_CLKDIV1, .size = 4, .shift = 12, },
	};

	/* i2s-ref
	*
	* i2s bus reference clock, selectable from external, esysclk or epllref
	*
	* Note, this used to be two clocks, but was compressed into one.
	*/

	static struct clk *clk_i2s_srclist[] = {
	[0] = &clk_i2s_eplldiv.clk,
	[1] = &clk_i2s_ext,
	[2] = &clk_epllref.clk,
	[3] = &clk_epllref.clk,
	};

	static struct clksrc_clk clk_i2s = {
	.clk = {
	.name = "i2s-if",
	.ctrlbit = S3C2443_SCLKCON_I2SCLK,
	.enable = s3c2443_clkcon_enable_s,

	},
	.sources = &(struct clksrc_sources) {
	.sources = clk_i2s_srclist,
	.nr_sources = ARRAY_SIZE(clk_i2s_srclist),
	},
	.reg_src = { .reg = S3C2443_CLKSRC, .size = 2, .shift = 14 },
	};

	static struct clk init_clocks_off[] = {
	{
	.name = "iis",
	.parent = &clk_p,
	.enable = s3c2443_clkcon_enable_p,
	.ctrlbit = S3C2443_PCLKCON_IIS,
	}, {
	.name = "hsspi",
	.parent = &clk_p,
	.enable = s3c2443_clkcon_enable_p,
	.ctrlbit = S3C2443_PCLKCON_HSSPI,
	}, {
	.name = "adc",
	.parent = &clk_p,
	.enable = s3c2443_clkcon_enable_p,
	.ctrlbit = S3C2443_PCLKCON_ADC,
	}, {
	.name = "i2c",
	.parent = &clk_p,
	.enable = s3c2443_clkcon_enable_p,
	.ctrlbit = S3C2443_PCLKCON_IIC,
	}
	};

	static struct clk init_clocks[] = {
	{
	.name = "dma",
	.parent = &clk_h,
	.enable = s3c2443_clkcon_enable_h,
	.ctrlbit = S3C2443_HCLKCON_DMA0,
	}, {
	.name = "dma",
	.parent = &clk_h,
	.enable = s3c2443_clkcon_enable_h,
	.ctrlbit = S3C2443_HCLKCON_DMA1,
	}, {
	.name = "dma",
	.parent = &clk_h,
	.enable = s3c2443_clkcon_enable_h,
	.ctrlbit = S3C2443_HCLKCON_DMA2,
	}, {
	.name = "dma",
	.parent = &clk_h,
	.enable = s3c2443_clkcon_enable_h,
	.ctrlbit = S3C2443_HCLKCON_DMA3,
	}, {
	.name = "dma",
	.parent = &clk_h,
	.enable = s3c2443_clkcon_enable_h,
	.ctrlbit = S3C2443_HCLKCON_DMA4,
	}, {
	.name = "dma",
	.parent = &clk_h,
	.enable = s3c2443_clkcon_enable_h,
	.ctrlbit = S3C2443_HCLKCON_DMA5,
	}, {
	.name = "hsmmc",
	.parent = &clk_h,
	.enable = s3c2443_clkcon_enable_h,
	.ctrlbit = S3C2443_HCLKCON_HSMMC,
	}, {
	.name = "gpio",
	.parent = &clk_p,
	.enable = s3c2443_clkcon_enable_p,
	.ctrlbit = S3C2443_PCLKCON_GPIO,
	}, {
	.name = "usb-host",
	.parent = &clk_h,
	.enable = s3c2443_clkcon_enable_h,
	.ctrlbit = S3C2443_HCLKCON_USBH,
	}, {
	.name = "usb-device",
	.parent = &clk_h,
	.enable = s3c2443_clkcon_enable_h,
	.ctrlbit = S3C2443_HCLKCON_USBD,
	}, {
	.name = "lcd",
	.parent = &clk_h,
	.enable = s3c2443_clkcon_enable_h,
	.ctrlbit = S3C2443_HCLKCON_LCDC,

	}, {
	.name = "timers",
	.parent = &clk_p,
	.enable = s3c2443_clkcon_enable_p,
	.ctrlbit = S3C2443_PCLKCON_PWMT,
	}, {
	.name = "cfc",
	.parent = &clk_h,
	.enable = s3c2443_clkcon_enable_h,
	.ctrlbit = S3C2443_HCLKCON_CFC,
	}, {
	.name = "ssmc",
	.parent = &clk_h,
	.enable = s3c2443_clkcon_enable_h,
	.ctrlbit = S3C2443_HCLKCON_SSMC,
	}, {
	.name = "uart",
	.devname = "s3c2440-uart.0",
	.parent = &clk_p,
	.enable = s3c2443_clkcon_enable_p,
	.ctrlbit = S3C2443_PCLKCON_UART0,
	}, {
	.name = "uart",
	.devname = "s3c2440-uart.1",
	.parent = &clk_p,
	.enable = s3c2443_clkcon_enable_p,
	.ctrlbit = S3C2443_PCLKCON_UART1,
	}, {
	.name = "uart",
	.devname = "s3c2440-uart.2",
	.parent = &clk_p,
	.enable = s3c2443_clkcon_enable_p,
	.ctrlbit = S3C2443_PCLKCON_UART2,
	}, {
	.name = "uart",
	.devname = "s3c2440-uart.3",
	.parent = &clk_p,
	.enable = s3c2443_clkcon_enable_p,
	.ctrlbit = S3C2443_PCLKCON_UART3,
	}, {
	.name = "rtc",
	.parent = &clk_p,
	.enable = s3c2443_clkcon_enable_p,
	.ctrlbit = S3C2443_PCLKCON_RTC,
	}, {
	.name = "watchdog",
	.parent = &clk_p,
	.ctrlbit = S3C2443_PCLKCON_WDT,
	}, {
	.name = "ac97",
	.parent = &clk_p,
	.ctrlbit = S3C2443_PCLKCON_AC97,
	}, {
	.name = "nand",
	.parent = &clk_h,
	}, {
	.name = "usb-bus-host",
	.parent = &clk_usb_bus_host.clk,
	}
	};

	static inline unsigned long s3c2443_get_hdiv(unsigned long clkcon0)
	{
	clkcon0 &= S3C2443_CLKDIV0_HCLKDIV_MASK;

	return clkcon0 + 1;
	}

	/* EPLLCON compatible enough to get on/off information */

	void __init_or_cpufreq s3c2443_common_setup_clocks(pll_fn get_mpll,
	fdiv_fn get_fdiv)
	{
	unsigned long epllcon = __raw_readl(S3C2443_EPLLCON);
	unsigned long mpllcon = __raw_readl(S3C2443_MPLLCON);
	unsigned long clkdiv0 = __raw_readl(S3C2443_CLKDIV0);
	struct clk *xtal_clk;
	unsigned long xtal;
	unsigned long pll;
	unsigned long fclk;
	unsigned long hclk;
	unsigned long pclk;
	int ptr;

	xtal_clk = clk_get(NULL, "xtal");
	xtal = clk_get_rate(xtal_clk);
	clk_put(xtal_clk);

	pll = get_mpll(mpllcon, xtal);
	clk_msysclk.clk.rate = pll;

	fclk = pll / get_fdiv(clkdiv0);
	hclk = s3c2443_prediv_getrate(&clk_prediv);
	hclk /= s3c2443_get_hdiv(clkdiv0);
	pclk = hclk / ((clkdiv0 & S3C2443_CLKDIV0_HALF_PCLK) ? 2 : 1);

	s3c24xx_setup_clocks(fclk, hclk, pclk);

	printk("CPU: MPLL %s %ld.%03ld MHz, cpu %ld.%03ld MHz, mem %ld.%03ld MHz, pclk %ld.%03ld MHz\n",
	(mpllcon & S3C2443_PLLCON_OFF) ? "off":"on",
	print_mhz(pll), print_mhz(fclk),
	print_mhz(hclk), print_mhz(pclk));

	for (ptr = 0; ptr < ARRAY_SIZE(clksrc_clks); ptr++)
	s3c_set_clksrc(&clksrc_clks[ptr], true);

	/* ensure usb bus clock is within correct rate of 48MHz */

	if (clk_get_rate(&clk_usb_bus_host.clk) != (48 * 1000 * 1000)) {
	printk(KERN_INFO "Warning: USB host bus not at 48MHz\n");
	clk_set_rate(&clk_usb_bus_host.clk, 4810001000);
	}

	printk("CPU: EPLL %s %ld.%03ld MHz, usb-bus %ld.%03ld MHz\n",
	(epllcon & S3C2443_PLLCON_OFF) ? "off":"on",
	print_mhz(clk_get_rate(&clk_epll)),
	print_mhz(clk_get_rate(&clk_usb_bus)));
	}

	static struct clk *clks[] __initdata = {
	&clk_prediv,
	&clk_mpllref,
	&clk_mdivclk,
	&clk_ext,
	&clk_epll,
	&clk_usb_bus,
	&clk_armdiv,
	};

	static struct clksrc_clk *clksrcs[] __initdata = {
	&clk_i2s_eplldiv,
	&clk_i2s,
	&clk_usb_bus_host,
	&clk_epllref,
	&clk_esysclk,
	&clk_msysclk,
	&clk_arm,
	};

	void __init s3c2443_common_init_clocks(int xtal, pll_fn get_mpll,
	fdiv_fn get_fdiv,
	unsigned int *divs, int nr_divs,
	int divmask)
	{
	int ptr;

	armdiv = divs;
	nr_armdiv = nr_divs;
	armdivmask = divmask;

	/* s3c2443 parents h and p clocks from prediv */
	clk_h.parent = &clk_prediv;
	clk_p.parent = &clk_prediv;

	clk_usb_bus.parent = &clk_usb_bus_host.clk;
	clk_epll.parent = &clk_epllref.clk;

	s3c24xx_register_baseclocks(xtal);
	s3c24xx_register_clocks(clks, ARRAY_SIZE(clks));

	for (ptr = 0; ptr < ARRAY_SIZE(clksrcs); ptr++)
	s3c_register_clksrc(clksrcs[ptr], 1);

	s3c_register_clksrc(clksrc_clks, ARRAY_SIZE(clksrc_clks));
	s3c_register_clocks(init_clocks, ARRAY_SIZE(init_clocks));

	/* See s3c2443/etc notes on disabling clocks at init time */
	s3c_register_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
	s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));

	s3c2443_common_setup_clocks(get_mpll, get_fdiv);
	}