| /* |
| * This file is part of wl1271 |
| * |
| * Copyright (C) 2009 Nokia Corporation |
| * |
| * Contact: Luciano Coelho <luciano.coelho@nokia.com> |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License |
| * version 2 as published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, but |
| * WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU |
| * General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA |
| * 02110-1301 USA |
| * |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/platform_device.h> |
| #include <linux/crc7.h> |
| #include <linux/spi/spi.h> |
| #include <linux/etherdevice.h> |
| |
| #include "wl1271.h" |
| #include "wl1271_reg.h" |
| #include "wl1271_spi.h" |
| #include "wl1271_acx.h" |
| #include "wl12xx_80211.h" |
| #include "wl1271_cmd.h" |
| |
| /* |
| * send command to firmware |
| * |
| * @wl: wl struct |
| * @id: command id |
| * @buf: buffer containing the command, must work with dma |
| * @len: length of the buffer |
| */ |
| int wl1271_cmd_send(struct wl1271 *wl, u16 id, void *buf, size_t len) |
| { |
| struct wl1271_cmd_header *cmd; |
| unsigned long timeout; |
| u32 intr; |
| int ret = 0; |
| |
| cmd = buf; |
| cmd->id = id; |
| cmd->status = 0; |
| |
| WARN_ON(len % 4 != 0); |
| |
| wl1271_spi_mem_write(wl, wl->cmd_box_addr, buf, len); |
| |
| wl1271_reg_write32(wl, ACX_REG_INTERRUPT_TRIG, INTR_TRIG_CMD); |
| |
| timeout = jiffies + msecs_to_jiffies(WL1271_COMMAND_TIMEOUT); |
| |
| intr = wl1271_reg_read32(wl, ACX_REG_INTERRUPT_NO_CLEAR); |
| while (!(intr & WL1271_ACX_INTR_CMD_COMPLETE)) { |
| if (time_after(jiffies, timeout)) { |
| wl1271_error("command complete timeout"); |
| ret = -ETIMEDOUT; |
| goto out; |
| } |
| |
| msleep(1); |
| |
| intr = wl1271_reg_read32(wl, ACX_REG_INTERRUPT_NO_CLEAR); |
| } |
| |
| wl1271_reg_write32(wl, ACX_REG_INTERRUPT_ACK, |
| WL1271_ACX_INTR_CMD_COMPLETE); |
| |
| out: |
| return ret; |
| } |
| |
| int wl1271_cmd_cal_channel_tune(struct wl1271 *wl) |
| { |
| struct wl1271_cmd_cal_channel_tune *cmd; |
| int ret = 0; |
| |
| cmd = kzalloc(sizeof(*cmd), GFP_KERNEL); |
| if (!cmd) |
| return -ENOMEM; |
| |
| cmd->test.id = TEST_CMD_CHANNEL_TUNE; |
| |
| cmd->band = WL1271_CHANNEL_TUNE_BAND_2_4; |
| /* set up any channel, 7 is in the middle of the range */ |
| cmd->channel = 7; |
| |
| ret = wl1271_cmd_test(wl, cmd, sizeof(*cmd), 0); |
| if (ret < 0) |
| wl1271_warning("TEST_CMD_CHANNEL_TUNE failed"); |
| |
| kfree(cmd); |
| return ret; |
| } |
| |
| int wl1271_cmd_cal_update_ref_point(struct wl1271 *wl) |
| { |
| struct wl1271_cmd_cal_update_ref_point *cmd; |
| int ret = 0; |
| |
| cmd = kzalloc(sizeof(*cmd), GFP_KERNEL); |
| if (!cmd) |
| return -ENOMEM; |
| |
| cmd->test.id = TEST_CMD_UPDATE_PD_REFERENCE_POINT; |
| |
| /* FIXME: still waiting for the correct values */ |
| cmd->ref_power = 0; |
| cmd->ref_detector = 0; |
| |
| cmd->sub_band = WL1271_PD_REFERENCE_POINT_BAND_B_G; |
| |
| ret = wl1271_cmd_test(wl, cmd, sizeof(*cmd), 0); |
| if (ret < 0) |
| wl1271_warning("TEST_CMD_UPDATE_PD_REFERENCE_POINT failed"); |
| |
| kfree(cmd); |
| return ret; |
| } |
| |
| int wl1271_cmd_cal_p2g(struct wl1271 *wl) |
| { |
| struct wl1271_cmd_cal_p2g *cmd; |
| int ret = 0; |
| |
| cmd = kzalloc(sizeof(*cmd), GFP_KERNEL); |
| if (!cmd) |
| return -ENOMEM; |
| |
| cmd->test.id = TEST_CMD_P2G_CAL; |
| |
| cmd->sub_band_mask = WL1271_CAL_P2G_BAND_B_G; |
| |
| ret = wl1271_cmd_test(wl, cmd, sizeof(*cmd), 0); |
| if (ret < 0) |
| wl1271_warning("TEST_CMD_P2G_CAL failed"); |
| |
| kfree(cmd); |
| return ret; |
| } |
| |
| int wl1271_cmd_cal(struct wl1271 *wl) |
| { |
| /* |
| * FIXME: we must make sure that we're not sleeping when calibration |
| * is done |
| */ |
| int ret; |
| |
| wl1271_notice("performing tx calibration"); |
| |
| ret = wl1271_cmd_cal_channel_tune(wl); |
| if (ret < 0) |
| return ret; |
| |
| ret = wl1271_cmd_cal_update_ref_point(wl); |
| if (ret < 0) |
| return ret; |
| |
| ret = wl1271_cmd_cal_p2g(wl); |
| if (ret < 0) |
| return ret; |
| |
| return ret; |
| } |
| |
| int wl1271_cmd_join(struct wl1271 *wl, u8 bss_type, u8 dtim_interval, |
| u16 beacon_interval, u8 wait) |
| { |
| static bool do_cal = true; |
| unsigned long timeout; |
| struct wl1271_cmd_join *join; |
| int ret, i; |
| u8 *bssid; |
| |
| /* FIXME: remove when we get calibration from the factory */ |
| if (do_cal) { |
| ret = wl1271_cmd_cal(wl); |
| if (ret < 0) |
| wl1271_warning("couldn't calibrate"); |
| else |
| do_cal = false; |
| } |
| |
| |
| join = kzalloc(sizeof(*join), GFP_KERNEL); |
| if (!join) { |
| ret = -ENOMEM; |
| goto out; |
| } |
| |
| wl1271_debug(DEBUG_CMD, "cmd join"); |
| |
| /* Reverse order BSSID */ |
| bssid = (u8 *) &join->bssid_lsb; |
| for (i = 0; i < ETH_ALEN; i++) |
| bssid[i] = wl->bssid[ETH_ALEN - i - 1]; |
| |
| join->rx_config_options = wl->rx_config; |
| join->rx_filter_options = wl->rx_filter; |
| |
| join->basic_rate_set = RATE_MASK_1MBPS | RATE_MASK_2MBPS | |
| RATE_MASK_5_5MBPS | RATE_MASK_11MBPS; |
| |
| join->beacon_interval = beacon_interval; |
| join->dtim_interval = dtim_interval; |
| join->bss_type = bss_type; |
| join->channel = wl->channel; |
| join->ssid_len = wl->ssid_len; |
| memcpy(join->ssid, wl->ssid, wl->ssid_len); |
| join->ctrl = WL1271_JOIN_CMD_CTRL_TX_FLUSH; |
| |
| /* increment the session counter */ |
| wl->session_counter++; |
| if (wl->session_counter >= SESSION_COUNTER_MAX) |
| wl->session_counter = 0; |
| |
| join->ctrl |= wl->session_counter << WL1271_JOIN_CMD_TX_SESSION_OFFSET; |
| |
| |
| ret = wl1271_cmd_send(wl, CMD_START_JOIN, join, sizeof(*join)); |
| if (ret < 0) { |
| wl1271_error("failed to initiate cmd join"); |
| goto out_free; |
| } |
| |
| timeout = msecs_to_jiffies(JOIN_TIMEOUT); |
| |
| /* |
| * ugly hack: we should wait for JOIN_EVENT_COMPLETE_ID but to |
| * simplify locking we just sleep instead, for now |
| */ |
| if (wait) |
| msleep(10); |
| |
| out_free: |
| kfree(join); |
| |
| out: |
| return ret; |
| } |
| |
| /** |
| * send test command to firmware |
| * |
| * @wl: wl struct |
| * @buf: buffer containing the command, with all headers, must work with dma |
| * @len: length of the buffer |
| * @answer: is answer needed |
| */ |
| int wl1271_cmd_test(struct wl1271 *wl, void *buf, size_t buf_len, u8 answer) |
| { |
| int ret; |
| |
| wl1271_debug(DEBUG_CMD, "cmd test"); |
| |
| ret = wl1271_cmd_send(wl, CMD_TEST, buf, buf_len); |
| |
| if (ret < 0) { |
| wl1271_warning("TEST command failed"); |
| return ret; |
| } |
| |
| if (answer) { |
| struct wl1271_command *cmd_answer; |
| |
| /* |
| * The test command got in, we can read the answer. |
| * The answer would be a wl1271_command, where the |
| * parameter array contains the actual answer. |
| */ |
| wl1271_spi_mem_read(wl, wl->cmd_box_addr, buf, buf_len); |
| |
| cmd_answer = buf; |
| |
| if (cmd_answer->header.status != CMD_STATUS_SUCCESS) |
| wl1271_error("TEST command answer error: %d", |
| cmd_answer->header.status); |
| } |
| |
| return 0; |
| } |
| |
| /** |
| * read acx from firmware |
| * |
| * @wl: wl struct |
| * @id: acx id |
| * @buf: buffer for the response, including all headers, must work with dma |
| * @len: lenght of buf |
| */ |
| int wl1271_cmd_interrogate(struct wl1271 *wl, u16 id, void *buf, size_t len) |
| { |
| struct acx_header *acx = buf; |
| int ret; |
| |
| wl1271_debug(DEBUG_CMD, "cmd interrogate"); |
| |
| acx->id = id; |
| |
| /* payload length, does not include any headers */ |
| acx->len = len - sizeof(*acx); |
| |
| ret = wl1271_cmd_send(wl, CMD_INTERROGATE, acx, sizeof(*acx)); |
| if (ret < 0) { |
| wl1271_error("INTERROGATE command failed"); |
| goto out; |
| } |
| |
| /* the interrogate command got in, we can read the answer */ |
| wl1271_spi_mem_read(wl, wl->cmd_box_addr, buf, len); |
| |
| acx = buf; |
| if (acx->cmd.status != CMD_STATUS_SUCCESS) |
| wl1271_error("INTERROGATE command error: %d", |
| acx->cmd.status); |
| |
| out: |
| return ret; |
| } |
| |
| /** |
| * write acx value to firmware |
| * |
| * @wl: wl struct |
| * @id: acx id |
| * @buf: buffer containing acx, including all headers, must work with dma |
| * @len: length of buf |
| */ |
| int wl1271_cmd_configure(struct wl1271 *wl, u16 id, void *buf, size_t len) |
| { |
| struct acx_header *acx = buf; |
| int ret; |
| |
| wl1271_debug(DEBUG_CMD, "cmd configure"); |
| |
| acx->id = id; |
| |
| /* payload length, does not include any headers */ |
| acx->len = len - sizeof(*acx); |
| |
| ret = wl1271_cmd_send(wl, CMD_CONFIGURE, acx, len); |
| if (ret < 0) { |
| wl1271_warning("CONFIGURE command NOK"); |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| int wl1271_cmd_data_path(struct wl1271 *wl, u8 channel, bool enable) |
| { |
| struct cmd_enabledisable_path *cmd; |
| int ret; |
| u16 cmd_rx, cmd_tx; |
| |
| wl1271_debug(DEBUG_CMD, "cmd data path"); |
| |
| cmd = kzalloc(sizeof(*cmd), GFP_KERNEL); |
| if (!cmd) { |
| ret = -ENOMEM; |
| goto out; |
| } |
| |
| cmd->channel = channel; |
| |
| if (enable) { |
| cmd_rx = CMD_ENABLE_RX; |
| cmd_tx = CMD_ENABLE_TX; |
| } else { |
| cmd_rx = CMD_DISABLE_RX; |
| cmd_tx = CMD_DISABLE_TX; |
| } |
| |
| ret = wl1271_cmd_send(wl, cmd_rx, cmd, sizeof(*cmd)); |
| if (ret < 0) { |
| wl1271_error("rx %s cmd for channel %d failed", |
| enable ? "start" : "stop", channel); |
| goto out; |
| } |
| |
| wl1271_debug(DEBUG_BOOT, "rx %s cmd channel %d", |
| enable ? "start" : "stop", channel); |
| |
| ret = wl1271_cmd_send(wl, cmd_tx, cmd, sizeof(*cmd)); |
| if (ret < 0) { |
| wl1271_error("tx %s cmd for channel %d failed", |
| enable ? "start" : "stop", channel); |
| return ret; |
| } |
| |
| wl1271_debug(DEBUG_BOOT, "tx %s cmd channel %d", |
| enable ? "start" : "stop", channel); |
| |
| out: |
| kfree(cmd); |
| return ret; |
| } |
| |
| int wl1271_cmd_ps_mode(struct wl1271 *wl, u8 ps_mode) |
| { |
| struct wl1271_cmd_ps_params *ps_params = NULL; |
| int ret = 0; |
| |
| /* FIXME: this should be in ps.c */ |
| ret = wl1271_acx_wake_up_conditions(wl, WAKE_UP_EVENT_DTIM_BITMAP, |
| wl->listen_int); |
| if (ret < 0) { |
| wl1271_error("couldn't set wake up conditions"); |
| goto out; |
| } |
| |
| wl1271_debug(DEBUG_CMD, "cmd set ps mode"); |
| |
| ps_params = kzalloc(sizeof(*ps_params), GFP_KERNEL); |
| if (!ps_params) { |
| ret = -ENOMEM; |
| goto out; |
| } |
| |
| ps_params->ps_mode = ps_mode; |
| ps_params->send_null_data = 1; |
| ps_params->retries = 5; |
| ps_params->hang_over_period = 128; |
| ps_params->null_data_rate = 1; /* 1 Mbps */ |
| |
| ret = wl1271_cmd_send(wl, CMD_SET_PS_MODE, ps_params, |
| sizeof(*ps_params)); |
| if (ret < 0) { |
| wl1271_error("cmd set_ps_mode failed"); |
| goto out; |
| } |
| |
| out: |
| kfree(ps_params); |
| return ret; |
| } |
| |
| int wl1271_cmd_read_memory(struct wl1271 *wl, u32 addr, void *answer, |
| size_t len) |
| { |
| struct cmd_read_write_memory *cmd; |
| int ret = 0; |
| |
| wl1271_debug(DEBUG_CMD, "cmd read memory"); |
| |
| cmd = kzalloc(sizeof(*cmd), GFP_KERNEL); |
| if (!cmd) { |
| ret = -ENOMEM; |
| goto out; |
| } |
| |
| WARN_ON(len > MAX_READ_SIZE); |
| len = min_t(size_t, len, MAX_READ_SIZE); |
| |
| cmd->addr = addr; |
| cmd->size = len; |
| |
| ret = wl1271_cmd_send(wl, CMD_READ_MEMORY, cmd, sizeof(*cmd)); |
| if (ret < 0) { |
| wl1271_error("read memory command failed: %d", ret); |
| goto out; |
| } |
| |
| /* the read command got in, we can now read the answer */ |
| wl1271_spi_mem_read(wl, wl->cmd_box_addr, cmd, sizeof(*cmd)); |
| |
| if (cmd->header.status != CMD_STATUS_SUCCESS) |
| wl1271_error("error in read command result: %d", |
| cmd->header.status); |
| |
| memcpy(answer, cmd->value, len); |
| |
| out: |
| kfree(cmd); |
| return ret; |
| } |
| |
| int wl1271_cmd_scan(struct wl1271 *wl, u8 *ssid, size_t len, |
| u8 active_scan, u8 high_prio, u8 num_channels, |
| u8 probe_requests) |
| { |
| |
| struct wl1271_cmd_trigger_scan_to *trigger = NULL; |
| struct wl1271_cmd_scan *params = NULL; |
| int i, ret; |
| u16 scan_options = 0; |
| |
| if (wl->scanning) |
| return -EINVAL; |
| |
| params = kzalloc(sizeof(*params), GFP_KERNEL); |
| if (!params) |
| return -ENOMEM; |
| |
| params->params.rx_config_options = cpu_to_le32(CFG_RX_ALL_GOOD); |
| params->params.rx_filter_options = |
| cpu_to_le32(CFG_RX_PRSP_EN | CFG_RX_MGMT_EN | CFG_RX_BCN_EN); |
| |
| if (!active_scan) |
| scan_options |= WL1271_SCAN_OPT_PASSIVE; |
| if (high_prio) |
| scan_options |= WL1271_SCAN_OPT_PRIORITY_HIGH; |
| params->params.scan_options = scan_options; |
| |
| params->params.num_channels = num_channels; |
| params->params.num_probe_requests = probe_requests; |
| params->params.tx_rate = cpu_to_le32(RATE_MASK_2MBPS); |
| params->params.tid_trigger = 0; |
| params->params.scan_tag = WL1271_SCAN_DEFAULT_TAG; |
| |
| for (i = 0; i < num_channels; i++) { |
| params->channels[i].min_duration = |
| cpu_to_le32(WL1271_SCAN_CHAN_MIN_DURATION); |
| params->channels[i].max_duration = |
| cpu_to_le32(WL1271_SCAN_CHAN_MAX_DURATION); |
| memset(¶ms->channels[i].bssid_lsb, 0xff, 4); |
| memset(¶ms->channels[i].bssid_msb, 0xff, 2); |
| params->channels[i].early_termination = 0; |
| params->channels[i].tx_power_att = WL1271_SCAN_CURRENT_TX_PWR; |
| params->channels[i].channel = i + 1; |
| } |
| |
| if (len && ssid) { |
| params->params.ssid_len = len; |
| memcpy(params->params.ssid, ssid, len); |
| } |
| |
| ret = wl1271_cmd_build_probe_req(wl, ssid, len); |
| if (ret < 0) { |
| wl1271_error("PROBE request template failed"); |
| goto out; |
| } |
| |
| trigger = kzalloc(sizeof(*trigger), GFP_KERNEL); |
| if (!trigger) { |
| ret = -ENOMEM; |
| goto out; |
| } |
| |
| /* disable the timeout */ |
| trigger->timeout = 0; |
| |
| ret = wl1271_cmd_send(wl, CMD_TRIGGER_SCAN_TO, trigger, |
| sizeof(*trigger)); |
| if (ret < 0) { |
| wl1271_error("trigger scan to failed for hw scan"); |
| goto out; |
| } |
| |
| wl1271_dump(DEBUG_SCAN, "SCAN: ", params, sizeof(*params)); |
| |
| wl->scanning = true; |
| |
| ret = wl1271_cmd_send(wl, CMD_SCAN, params, sizeof(*params)); |
| if (ret < 0) { |
| wl1271_error("SCAN failed"); |
| goto out; |
| } |
| |
| wl1271_spi_mem_read(wl, wl->cmd_box_addr, params, sizeof(*params)); |
| |
| if (params->header.status != CMD_STATUS_SUCCESS) { |
| wl1271_error("Scan command error: %d", |
| params->header.status); |
| wl->scanning = false; |
| ret = -EIO; |
| goto out; |
| } |
| |
| out: |
| kfree(params); |
| return ret; |
| } |
| |
| int wl1271_cmd_template_set(struct wl1271 *wl, u16 template_id, |
| void *buf, size_t buf_len) |
| { |
| struct wl1271_cmd_template_set *cmd; |
| int ret = 0; |
| |
| wl1271_debug(DEBUG_CMD, "cmd template_set %d", template_id); |
| |
| WARN_ON(buf_len > WL1271_CMD_TEMPL_MAX_SIZE); |
| buf_len = min_t(size_t, buf_len, WL1271_CMD_TEMPL_MAX_SIZE); |
| |
| cmd = kzalloc(sizeof(*cmd), GFP_KERNEL); |
| if (!cmd) { |
| ret = -ENOMEM; |
| goto out; |
| } |
| |
| cmd->len = cpu_to_le16(buf_len); |
| cmd->template_type = template_id; |
| cmd->enabled_rates = ACX_RATE_MASK_UNSPECIFIED; |
| cmd->short_retry_limit = ACX_RATE_RETRY_LIMIT; |
| cmd->long_retry_limit = ACX_RATE_RETRY_LIMIT; |
| |
| if (buf) |
| memcpy(cmd->template_data, buf, buf_len); |
| |
| ret = wl1271_cmd_send(wl, CMD_SET_TEMPLATE, cmd, sizeof(*cmd)); |
| if (ret < 0) { |
| wl1271_warning("cmd set_template failed: %d", ret); |
| goto out_free; |
| } |
| |
| out_free: |
| kfree(cmd); |
| |
| out: |
| return ret; |
| } |
| |
| static int wl1271_build_basic_rates(char *rates) |
| { |
| u8 index = 0; |
| |
| rates[index++] = IEEE80211_BASIC_RATE_MASK | IEEE80211_CCK_RATE_1MB; |
| rates[index++] = IEEE80211_BASIC_RATE_MASK | IEEE80211_CCK_RATE_2MB; |
| rates[index++] = IEEE80211_BASIC_RATE_MASK | IEEE80211_CCK_RATE_5MB; |
| rates[index++] = IEEE80211_BASIC_RATE_MASK | IEEE80211_CCK_RATE_11MB; |
| |
| return index; |
| } |
| |
| static int wl1271_build_extended_rates(char *rates) |
| { |
| u8 index = 0; |
| |
| rates[index++] = IEEE80211_OFDM_RATE_6MB; |
| rates[index++] = IEEE80211_OFDM_RATE_9MB; |
| rates[index++] = IEEE80211_OFDM_RATE_12MB; |
| rates[index++] = IEEE80211_OFDM_RATE_18MB; |
| rates[index++] = IEEE80211_OFDM_RATE_24MB; |
| rates[index++] = IEEE80211_OFDM_RATE_36MB; |
| rates[index++] = IEEE80211_OFDM_RATE_48MB; |
| rates[index++] = IEEE80211_OFDM_RATE_54MB; |
| |
| return index; |
| } |
| |
| int wl1271_cmd_build_null_data(struct wl1271 *wl) |
| { |
| struct wl12xx_null_data_template template; |
| |
| if (!is_zero_ether_addr(wl->bssid)) { |
| memcpy(template.header.da, wl->bssid, ETH_ALEN); |
| memcpy(template.header.bssid, wl->bssid, ETH_ALEN); |
| } else { |
| memset(template.header.da, 0xff, ETH_ALEN); |
| memset(template.header.bssid, 0xff, ETH_ALEN); |
| } |
| |
| memcpy(template.header.sa, wl->mac_addr, ETH_ALEN); |
| template.header.frame_ctl = cpu_to_le16(IEEE80211_FTYPE_DATA | |
| IEEE80211_STYPE_NULLFUNC); |
| |
| return wl1271_cmd_template_set(wl, CMD_TEMPL_NULL_DATA, &template, |
| sizeof(template)); |
| |
| } |
| |
| int wl1271_cmd_build_ps_poll(struct wl1271 *wl, u16 aid) |
| { |
| struct wl12xx_ps_poll_template template; |
| |
| memcpy(template.bssid, wl->bssid, ETH_ALEN); |
| memcpy(template.ta, wl->mac_addr, ETH_ALEN); |
| template.aid = aid; |
| template.fc = cpu_to_le16(IEEE80211_FTYPE_CTL | IEEE80211_STYPE_PSPOLL); |
| |
| return wl1271_cmd_template_set(wl, CMD_TEMPL_PS_POLL, &template, |
| sizeof(template)); |
| |
| } |
| |
| int wl1271_cmd_build_probe_req(struct wl1271 *wl, u8 *ssid, size_t ssid_len) |
| { |
| struct wl12xx_probe_req_template template; |
| struct wl12xx_ie_rates *rates; |
| char *ptr; |
| u16 size; |
| |
| ptr = (char *)&template; |
| size = sizeof(struct ieee80211_header); |
| |
| memset(template.header.da, 0xff, ETH_ALEN); |
| memset(template.header.bssid, 0xff, ETH_ALEN); |
| memcpy(template.header.sa, wl->mac_addr, ETH_ALEN); |
| template.header.frame_ctl = cpu_to_le16(IEEE80211_STYPE_PROBE_REQ); |
| |
| /* IEs */ |
| /* SSID */ |
| template.ssid.header.id = WLAN_EID_SSID; |
| template.ssid.header.len = ssid_len; |
| if (ssid_len && ssid) |
| memcpy(template.ssid.ssid, ssid, ssid_len); |
| size += sizeof(struct wl12xx_ie_header) + ssid_len; |
| ptr += size; |
| |
| /* Basic Rates */ |
| rates = (struct wl12xx_ie_rates *)ptr; |
| rates->header.id = WLAN_EID_SUPP_RATES; |
| rates->header.len = wl1271_build_basic_rates(rates->rates); |
| size += sizeof(struct wl12xx_ie_header) + rates->header.len; |
| ptr += sizeof(struct wl12xx_ie_header) + rates->header.len; |
| |
| /* Extended rates */ |
| rates = (struct wl12xx_ie_rates *)ptr; |
| rates->header.id = WLAN_EID_EXT_SUPP_RATES; |
| rates->header.len = wl1271_build_extended_rates(rates->rates); |
| size += sizeof(struct wl12xx_ie_header) + rates->header.len; |
| |
| wl1271_dump(DEBUG_SCAN, "PROBE REQ: ", &template, size); |
| |
| return wl1271_cmd_template_set(wl, CMD_TEMPL_CFG_PROBE_REQ_2_4, |
| &template, size); |
| } |
| |
| int wl1271_cmd_set_default_wep_key(struct wl1271 *wl, u8 id) |
| { |
| struct wl1271_cmd_set_keys *cmd; |
| int ret = 0; |
| |
| wl1271_debug(DEBUG_CMD, "cmd set_default_wep_key %d", id); |
| |
| cmd = kzalloc(sizeof(*cmd), GFP_KERNEL); |
| if (!cmd) { |
| ret = -ENOMEM; |
| goto out; |
| } |
| |
| cmd->id = id; |
| cmd->key_action = KEY_SET_ID; |
| cmd->key_type = KEY_WEP; |
| |
| ret = wl1271_cmd_send(wl, CMD_SET_KEYS, cmd, sizeof(*cmd)); |
| if (ret < 0) { |
| wl1271_warning("cmd set_default_wep_key failed: %d", ret); |
| goto out; |
| } |
| |
| out: |
| kfree(cmd); |
| |
| return ret; |
| } |
| |
| int wl1271_cmd_set_key(struct wl1271 *wl, u16 action, u8 id, u8 key_type, |
| u8 key_size, const u8 *key, const u8 *addr) |
| { |
| struct wl1271_cmd_set_keys *cmd; |
| int ret = 0; |
| |
| cmd = kzalloc(sizeof(*cmd), GFP_KERNEL); |
| if (!cmd) { |
| ret = -ENOMEM; |
| goto out; |
| } |
| |
| if (key_type != KEY_WEP) |
| memcpy(cmd->addr, addr, ETH_ALEN); |
| |
| cmd->key_action = action; |
| cmd->key_size = key_size; |
| cmd->key_type = key_type; |
| |
| /* we have only one SSID profile */ |
| cmd->ssid_profile = 0; |
| |
| cmd->id = id; |
| |
| /* FIXME: this is from wl1251, needs to be checked */ |
| if (key_type == KEY_TKIP) { |
| /* |
| * We get the key in the following form: |
| * TKIP (16 bytes) - TX MIC (8 bytes) - RX MIC (8 bytes) |
| * but the target is expecting: |
| * TKIP - RX MIC - TX MIC |
| */ |
| memcpy(cmd->key, key, 16); |
| memcpy(cmd->key + 16, key + 24, 8); |
| memcpy(cmd->key + 24, key + 16, 8); |
| |
| } else { |
| memcpy(cmd->key, key, key_size); |
| } |
| |
| wl1271_dump(DEBUG_CRYPT, "TARGET KEY: ", cmd, sizeof(*cmd)); |
| |
| ret = wl1271_cmd_send(wl, CMD_SET_KEYS, cmd, sizeof(*cmd)); |
| if (ret < 0) { |
| wl1271_warning("could not set keys"); |
| goto out; |
| } |
| |
| out: |
| kfree(cmd); |
| |
| return ret; |
| } |