| /* |
| * Driver for AK8813 / AK8814 TV-ecoders from Asahi Kasei Microsystems Co., Ltd. (AKM) |
| * |
| * Copyright (C) 2010, Guennadi Liakhovetski <g.liakhovetski@gmx.de> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| */ |
| |
| #include <linux/i2c.h> |
| #include <linux/init.h> |
| #include <linux/platform_device.h> |
| #include <linux/videodev2.h> |
| |
| #include <media/ak881x.h> |
| #include <media/v4l2-chip-ident.h> |
| #include <media/v4l2-common.h> |
| #include <media/v4l2-device.h> |
| |
| #define AK881X_INTERFACE_MODE 0 |
| #define AK881X_VIDEO_PROCESS1 1 |
| #define AK881X_VIDEO_PROCESS2 2 |
| #define AK881X_VIDEO_PROCESS3 3 |
| #define AK881X_DAC_MODE 5 |
| #define AK881X_STATUS 0x24 |
| #define AK881X_DEVICE_ID 0x25 |
| #define AK881X_DEVICE_REVISION 0x26 |
| |
| struct ak881x { |
| struct v4l2_subdev subdev; |
| struct ak881x_pdata *pdata; |
| unsigned int lines; |
| int id; /* DEVICE_ID code V4L2_IDENT_AK881X code from v4l2-chip-ident.h */ |
| char revision; /* DEVICE_REVISION content */ |
| }; |
| |
| static int reg_read(struct i2c_client *client, const u8 reg) |
| { |
| return i2c_smbus_read_byte_data(client, reg); |
| } |
| |
| static int reg_write(struct i2c_client *client, const u8 reg, |
| const u8 data) |
| { |
| return i2c_smbus_write_byte_data(client, reg, data); |
| } |
| |
| static int reg_set(struct i2c_client *client, const u8 reg, |
| const u8 data, u8 mask) |
| { |
| int ret = reg_read(client, reg); |
| if (ret < 0) |
| return ret; |
| return reg_write(client, reg, (ret & ~mask) | (data & mask)); |
| } |
| |
| static struct ak881x *to_ak881x(const struct i2c_client *client) |
| { |
| return container_of(i2c_get_clientdata(client), struct ak881x, subdev); |
| } |
| |
| static int ak881x_g_chip_ident(struct v4l2_subdev *sd, |
| struct v4l2_dbg_chip_ident *id) |
| { |
| struct i2c_client *client = v4l2_get_subdevdata(sd); |
| struct ak881x *ak881x = to_ak881x(client); |
| |
| if (id->match.type != V4L2_CHIP_MATCH_I2C_ADDR) |
| return -EINVAL; |
| |
| if (id->match.addr != client->addr) |
| return -ENODEV; |
| |
| id->ident = ak881x->id; |
| id->revision = ak881x->revision; |
| |
| return 0; |
| } |
| |
| #ifdef CONFIG_VIDEO_ADV_DEBUG |
| static int ak881x_g_register(struct v4l2_subdev *sd, |
| struct v4l2_dbg_register *reg) |
| { |
| struct i2c_client *client = v4l2_get_subdevdata(sd); |
| |
| if (reg->match.type != V4L2_CHIP_MATCH_I2C_ADDR || reg->reg > 0x26) |
| return -EINVAL; |
| |
| if (reg->match.addr != client->addr) |
| return -ENODEV; |
| |
| reg->val = reg_read(client, reg->reg); |
| |
| if (reg->val > 0xffff) |
| return -EIO; |
| |
| return 0; |
| } |
| |
| static int ak881x_s_register(struct v4l2_subdev *sd, |
| struct v4l2_dbg_register *reg) |
| { |
| struct i2c_client *client = v4l2_get_subdevdata(sd); |
| |
| if (reg->match.type != V4L2_CHIP_MATCH_I2C_ADDR || reg->reg > 0x26) |
| return -EINVAL; |
| |
| if (reg->match.addr != client->addr) |
| return -ENODEV; |
| |
| if (reg_write(client, reg->reg, reg->val) < 0) |
| return -EIO; |
| |
| return 0; |
| } |
| #endif |
| |
| static int ak881x_try_g_mbus_fmt(struct v4l2_subdev *sd, |
| struct v4l2_mbus_framefmt *mf) |
| { |
| struct i2c_client *client = v4l2_get_subdevdata(sd); |
| struct ak881x *ak881x = to_ak881x(client); |
| |
| v4l_bound_align_image(&mf->width, 0, 720, 2, |
| &mf->height, 0, ak881x->lines, 1, 0); |
| mf->field = V4L2_FIELD_INTERLACED; |
| mf->code = V4L2_MBUS_FMT_YUYV8_2X8_LE; |
| mf->colorspace = V4L2_COLORSPACE_SMPTE170M; |
| |
| return 0; |
| } |
| |
| static int ak881x_s_mbus_fmt(struct v4l2_subdev *sd, |
| struct v4l2_mbus_framefmt *mf) |
| { |
| if (mf->field != V4L2_FIELD_INTERLACED || |
| mf->code != V4L2_MBUS_FMT_YUYV8_2X8_LE) |
| return -EINVAL; |
| |
| return ak881x_try_g_mbus_fmt(sd, mf); |
| } |
| |
| static int ak881x_enum_mbus_fmt(struct v4l2_subdev *sd, int index, |
| enum v4l2_mbus_pixelcode *code) |
| { |
| if (index) |
| return -EINVAL; |
| |
| *code = V4L2_MBUS_FMT_YUYV8_2X8_LE; |
| return 0; |
| } |
| |
| static int ak881x_cropcap(struct v4l2_subdev *sd, struct v4l2_cropcap *a) |
| { |
| struct i2c_client *client = v4l2_get_subdevdata(sd); |
| struct ak881x *ak881x = to_ak881x(client); |
| |
| a->bounds.left = 0; |
| a->bounds.top = 0; |
| a->bounds.width = 720; |
| a->bounds.height = ak881x->lines; |
| a->defrect = a->bounds; |
| a->type = V4L2_BUF_TYPE_VIDEO_OUTPUT; |
| a->pixelaspect.numerator = 1; |
| a->pixelaspect.denominator = 1; |
| |
| return 0; |
| } |
| |
| static int ak881x_s_std_output(struct v4l2_subdev *sd, v4l2_std_id std) |
| { |
| struct i2c_client *client = v4l2_get_subdevdata(sd); |
| struct ak881x *ak881x = to_ak881x(client); |
| u8 vp1; |
| |
| if (std == V4L2_STD_NTSC_443) { |
| vp1 = 3; |
| ak881x->lines = 480; |
| } else if (std == V4L2_STD_PAL_M) { |
| vp1 = 5; |
| ak881x->lines = 480; |
| } else if (std == V4L2_STD_PAL_60) { |
| vp1 = 7; |
| ak881x->lines = 480; |
| } else if (std && !(std & ~V4L2_STD_PAL)) { |
| vp1 = 0xf; |
| ak881x->lines = 576; |
| } else if (std && !(std & ~V4L2_STD_NTSC)) { |
| vp1 = 0; |
| ak881x->lines = 480; |
| } else { |
| /* No SECAM or PAL_N/Nc supported */ |
| return -EINVAL; |
| } |
| |
| reg_set(client, AK881X_VIDEO_PROCESS1, vp1, 0xf); |
| |
| return 0; |
| } |
| |
| static int ak881x_s_stream(struct v4l2_subdev *sd, int enable) |
| { |
| struct i2c_client *client = v4l2_get_subdevdata(sd); |
| struct ak881x *ak881x = to_ak881x(client); |
| |
| if (enable) { |
| u8 dac; |
| /* For colour-bar testing set bit 6 of AK881X_VIDEO_PROCESS1 */ |
| /* Default: composite output */ |
| if (ak881x->pdata->flags & AK881X_COMPONENT) |
| dac = 3; |
| else |
| dac = 4; |
| /* Turn on the DAC(s) */ |
| reg_write(client, AK881X_DAC_MODE, dac); |
| dev_dbg(&client->dev, "chip status 0x%x\n", |
| reg_read(client, AK881X_STATUS)); |
| } else { |
| /* ...and clear bit 6 of AK881X_VIDEO_PROCESS1 here */ |
| reg_write(client, AK881X_DAC_MODE, 0); |
| dev_dbg(&client->dev, "chip status 0x%x\n", |
| reg_read(client, AK881X_STATUS)); |
| } |
| |
| return 0; |
| } |
| |
| static struct v4l2_subdev_core_ops ak881x_subdev_core_ops = { |
| .g_chip_ident = ak881x_g_chip_ident, |
| #ifdef CONFIG_VIDEO_ADV_DEBUG |
| .g_register = ak881x_g_register, |
| .s_register = ak881x_s_register, |
| #endif |
| }; |
| |
| static struct v4l2_subdev_video_ops ak881x_subdev_video_ops = { |
| .s_mbus_fmt = ak881x_s_mbus_fmt, |
| .g_mbus_fmt = ak881x_try_g_mbus_fmt, |
| .try_mbus_fmt = ak881x_try_g_mbus_fmt, |
| .cropcap = ak881x_cropcap, |
| .enum_mbus_fmt = ak881x_enum_mbus_fmt, |
| .s_std_output = ak881x_s_std_output, |
| .s_stream = ak881x_s_stream, |
| }; |
| |
| static struct v4l2_subdev_ops ak881x_subdev_ops = { |
| .core = &ak881x_subdev_core_ops, |
| .video = &ak881x_subdev_video_ops, |
| }; |
| |
| static int ak881x_probe(struct i2c_client *client, |
| const struct i2c_device_id *did) |
| { |
| struct i2c_adapter *adapter = to_i2c_adapter(client->dev.parent); |
| struct ak881x *ak881x; |
| u8 ifmode, data; |
| |
| if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) { |
| dev_warn(&adapter->dev, |
| "I2C-Adapter doesn't support I2C_FUNC_SMBUS_WORD\n"); |
| return -EIO; |
| } |
| |
| ak881x = kzalloc(sizeof(struct ak881x), GFP_KERNEL); |
| if (!ak881x) |
| return -ENOMEM; |
| |
| v4l2_i2c_subdev_init(&ak881x->subdev, client, &ak881x_subdev_ops); |
| |
| data = reg_read(client, AK881X_DEVICE_ID); |
| |
| switch (data) { |
| case 0x13: |
| ak881x->id = V4L2_IDENT_AK8813; |
| break; |
| case 0x14: |
| ak881x->id = V4L2_IDENT_AK8814; |
| break; |
| default: |
| dev_err(&client->dev, |
| "No ak881x chip detected, register read %x\n", data); |
| kfree(ak881x); |
| return -ENODEV; |
| } |
| |
| ak881x->revision = reg_read(client, AK881X_DEVICE_REVISION); |
| ak881x->pdata = client->dev.platform_data; |
| |
| if (ak881x->pdata) { |
| if (ak881x->pdata->flags & AK881X_FIELD) |
| ifmode = 4; |
| else |
| ifmode = 0; |
| |
| switch (ak881x->pdata->flags & AK881X_IF_MODE_MASK) { |
| case AK881X_IF_MODE_BT656: |
| ifmode |= 1; |
| break; |
| case AK881X_IF_MODE_MASTER: |
| ifmode |= 2; |
| break; |
| case AK881X_IF_MODE_SLAVE: |
| default: |
| break; |
| } |
| |
| dev_dbg(&client->dev, "IF mode %x\n", ifmode); |
| |
| /* |
| * "Line Blanking No." seems to be the same as the number of |
| * "black" lines on, e.g., SuperH VOU, whose default value of 20 |
| * "incidentally" matches ak881x' default |
| */ |
| reg_write(client, AK881X_INTERFACE_MODE, ifmode | (20 << 3)); |
| } |
| |
| /* Hardware default: NTSC-M */ |
| ak881x->lines = 480; |
| |
| dev_info(&client->dev, "Detected an ak881x chip ID %x, revision %x\n", |
| data, ak881x->revision); |
| |
| return 0; |
| } |
| |
| static int ak881x_remove(struct i2c_client *client) |
| { |
| struct ak881x *ak881x = to_ak881x(client); |
| |
| v4l2_device_unregister_subdev(&ak881x->subdev); |
| kfree(ak881x); |
| |
| return 0; |
| } |
| |
| static const struct i2c_device_id ak881x_id[] = { |
| { "ak8813", 0 }, |
| { "ak8814", 0 }, |
| { } |
| }; |
| MODULE_DEVICE_TABLE(i2c, ak881x_id); |
| |
| static struct i2c_driver ak881x_i2c_driver = { |
| .driver = { |
| .name = "ak881x", |
| }, |
| .probe = ak881x_probe, |
| .remove = ak881x_remove, |
| .id_table = ak881x_id, |
| }; |
| |
| static int __init ak881x_module_init(void) |
| { |
| return i2c_add_driver(&ak881x_i2c_driver); |
| } |
| |
| static void __exit ak881x_module_exit(void) |
| { |
| i2c_del_driver(&ak881x_i2c_driver); |
| } |
| |
| module_init(ak881x_module_init); |
| module_exit(ak881x_module_exit); |
| |
| MODULE_DESCRIPTION("TV-output driver for ak8813/ak8814"); |
| MODULE_AUTHOR("Guennadi Liakhovetski <g.liakhovetski@gmx.de>"); |
| MODULE_LICENSE("GPL v2"); |