Gitiles
Code Review Sign In
LeafOS / LeafOS-Devices / android_kernel_samsung_gta4xl / a79fb37222f9f0d22ca4ff9d8936c8660655fa79 / . / drivers / battery_v2 / s2mu106_charger.c
blob: 8c7871ef6a75d5a0705fe8bb970f7cf84a803e5e [file] [log] [blame]
/*
* s2mu106_charger.c - S2MU106 Charger Driver
*
* Copyright (C) 2016 Samsung Electronics Co.Ltd
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version 2
* of the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
*/
#include "include/charger/s2mu106_charger.h"
#if defined(CONFIG_MUIC_S2MU106)
#include <linux/muic/s2mu106-muic.h>
#endif
#if defined(CONFIG_CCIC_S2MU106)
#include <linux/usb/typec/s2mu106/s2mu106_pd.h>
#endif
#if defined(CONFIG_PM_S2MU106)
#include "include/s2mu106_pmeter.h"
#endif
#include <linux/version.h>
#include <linux/sec_batt.h>
#if defined(CONFIG_LEDS_S2MU106_FLASH)
#include <linux/leds-s2mu106.h>
#endif
#ifdef CONFIG_USB_HOST_NOTIFY
#include <linux/usb_notify.h>
#endif
#define ENABLE 1
#define DISABLE 0
#if defined(CONFIG_SEC_FACTORY)
#define WC_CURRENT_WORK_STEP 250
#else
#define WC_CURRENT_WORK_STEP 1000
#endif
#define WC_CURRENT_STEP 100
#define WC_CURRENT_START 500
#define IVR_WORK_DELAY 50
extern int factory_mode;
static char *s2mu106_supplied_to[] = {
"battery",
};
static enum power_supply_property s2mu106_charger_props[] = {
POWER_SUPPLY_PROP_ONLINE,
};
static enum power_supply_property s2mu106_otg_props[] = {
POWER_SUPPLY_PROP_ONLINE,
};
static int s2mu106_get_charging_health(struct s2mu106_charger_data *charger);
static void s2mu106_set_input_current_limit(struct s2mu106_charger_data *charger, int charging_current);
static int s2mu106_get_input_current_limit(struct s2mu106_charger_data *charger);
static void s2mu106_test_read(struct i2c_client *i2c)
{
u8 data;
char str[1016] = {0,};
int i;
for (i = 0x0A; i <= 0x33; i++) {
s2mu106_read_reg(i2c, i, &data);
sprintf(str+strlen(str), "0x%02x:0x%02x, ", i, data);
}
s2mu106_read_reg(i2c, 0x39, &data);
sprintf(str+strlen(str), "0x39:0x%02x, ", data);
s2mu106_read_reg(i2c, 0x3A, &data);
sprintf(str+strlen(str), "0x3A:0x%02x, ", data);
s2mu106_read_reg(i2c, 0x75, &data);
sprintf(str+strlen(str), "0x75:0x%02x, ", data);
s2mu106_read_reg(i2c, 0x7A, &data);
sprintf(str+strlen(str), "0x7A:0x%02x, ", data);
s2mu106_read_reg(i2c, 0x95, &data);
sprintf(str+strlen(str), "0x95:0x%02x, ", data);
s2mu106_read_reg(i2c, 0x98, &data);
sprintf(str+strlen(str), "0x98:0x%02x, ", data);
s2mu106_read_reg(i2c, 0xAD, &data);
pr_err("%s: %s0xAD:0x%02x\n", __func__, str, data);
}
static int wcin_is_valid(u8 reg)
{
int ret;
ret = (reg & WCIN_STATUS_MASK) >> WCIN_STATUS_SHIFT;
switch (ret) {
case 0x03:
case 0x05:
return 1;
default:
break;
}
return 0;
}
#define REG_MODE_BUCK_OFF_FOR_FLASH (1<<4) // for camera flash + TA.
#define REG_MODE_BST (1<<5)
#define REG_MODE_TX (1<<3)
#define REG_MODE_OTG (1<<2)
#define REG_MODE_OTG_TX (3<<2)
#define REG_MODE_CHG (1<<1)
#define REG_MODE_BUCK (1<<0)
static void regmode_vote(struct s2mu106_charger_data *charger, int voter, int val)
{
static int vote_status = -1;
u8 set_val, reg;
mutex_lock(&charger->regmode_mutex);
pr_info("%s: voter: 0x%x, val: 0x%x\n", __func__, voter, val);
if (vote_status == -1) {
s2mu106_read_reg(charger->i2c, S2MU106_CHG_CTRL0, &reg);
pr_info("%s S2MU106_CHG_CTRL0: 0x%x\n", __func__, reg);
vote_status = reg & 0xf;
}
vote_status = (voter & val) | (vote_status & (~voter));
set_val = (u8)(vote_status & 0xff);
s2mu106_read_reg(charger->i2c, S2MU106_CHG_STATUS0, &reg);
pr_info("%s: vote_status: 0x%x, set_val: 0x%x, cable_type(%d), STATUS0(0x%x)\n",
__func__, vote_status, set_val, charger->cable_type, reg);
if ((vote_status & REG_MODE_BUCK_OFF_FOR_FLASH) || (vote_status & REG_MODE_BST)) {
set_val = val;
} else if (vote_status & REG_MODE_BUCK) {
if (vote_status & REG_MODE_OTG_TX) {
if (((vote_status & REG_MODE_OTG) && (!is_wireless_type(charger->cable_type) ||
(is_wireless_type(charger->cable_type) && !wcin_is_valid(reg))))
|| ((vote_status & REG_MODE_TX) && !is_wired_type(charger->cable_type))) {
set_val &= ~REG_MODE_BUCK;
set_val |= REG_MODE_CHG;
}
}
} else if (vote_status & REG_MODE_OTG_TX) {
set_val &= ~REG_MODE_BUCK;
set_val |= REG_MODE_CHG;
}
s2mu106_read_reg(charger->i2c, S2MU106_CHG_CTRL0, &reg);
pr_info("%s: prev: 0x%x, new: 0x%x\n", __func__, reg, set_val);
if ((set_val & REG_MODE_OTG_TX) && (set_val & REG_MODE_BUCK)) {
if (set_val & REG_MODE_OTG) {
#if defined(CONFIG_WIRELESS_CHARGER_MFC_S2MIW04)
union power_supply_propval value = {0,};
#endif
pr_info("%s: OTG_BUCK\n", __func__);
if ((reg & REG_MODE_OTG) && !(reg & REG_MODE_BUCK)) {
msleep(200);
disable_irq_nosync(charger->irq_otg);
s2mu106_update_reg(charger->i2c, 0x30, 0x0C, 0x0C); // OTG PATH ON
}
s2mu106_update_reg(charger->i2c, 0x39, 0x33, 0x33); // prevent OTG OCP reset
s2mu106_update_reg(charger->i2c,
S2MU106_CHG_CTRL0, set_val, REG_MODE_MASK);
if ((reg & REG_MODE_OTG) && !(reg & REG_MODE_BUCK)) {
msleep(150);
s2mu106_update_reg(charger->i2c, 0x30, 0x04, 0x0C); // OTG PATH OFF
enable_irq(charger->irq_otg);
}
#if defined(CONFIG_WIRELESS_CHARGER_MFC_S2MIW04)
/* wireless(otg) -> wirless + otg */
value.intval = 1;
psy_do_property(charger->pdata->wireless_charger_name, set,
POWER_SUPPLY_EXT_PROP_WIRELESS_TXMODE_DISCON, value);
#endif
} else if (set_val & REG_MODE_TX) {
pr_info("%s: TX_BUCK\n", __func__);
if ((reg & REG_MODE_TX) && !(reg & REG_MODE_BUCK)) {
msleep(200);
disable_irq_nosync(charger->irq_tx);
s2mu106_update_reg(charger->i2c, 0x30, 0x03, 0x03); // WCIN PATH ON
}
s2mu106_update_reg(charger->i2c, 0x39, 0xCC, 0xCC); // prevent TX OCP reset
s2mu106_update_reg(charger->i2c,
S2MU106_CHG_CTRL0, set_val, REG_MODE_MASK);
if ((reg & REG_MODE_TX) && !(reg & REG_MODE_BUCK)) {
msleep(150);
s2mu106_update_reg(charger->i2c, 0x30, 0x01, 0x03); // WCIN PATH OFF
enable_irq(charger->irq_tx);
}
} else {
pr_info("%s: Abnormal\n", __func__);
}
s2mu106_update_reg(charger->i2c, 0x3A, 0, 0x03); // SET_SYNC
} else if ((reg & REG_MODE_OTG_TX) && (reg & REG_MODE_BUCK)
&& (set_val & REG_MODE_OTG_TX) && !(set_val & REG_MODE_BUCK)) {
if (set_val & REG_MODE_OTG) {
pr_info("%s: OTG_BUCK -> OTG\n", __func__);
s2mu106_update_reg(charger->i2c, 0x30, 0x0C, 0x0C); // OTG PATH ON
s2mu106_update_reg(charger->i2c,
S2MU106_CHG_CTRL0, set_val, REG_MODE_MASK);
s2mu106_update_reg(charger->i2c, 0x39, 0x11, 0x33); // prevent OTG OCP default
s2mu106_update_reg(charger->i2c, 0x3A, 0x01, 0x03); // SET_Auto Async
msleep(20);
s2mu106_update_reg(charger->i2c, 0x30, 0x04, 0x0C); // OTG PATH OFF
} else if (set_val & REG_MODE_TX) {
pr_info("%s: TX_BUCK -> TX\n", __func__);
s2mu106_update_reg(charger->i2c, 0x30, 0x03, 0x03); // WCIN PATH ON
s2mu106_update_reg(charger->i2c,
S2MU106_CHG_CTRL0, set_val, REG_MODE_MASK);
s2mu106_update_reg(charger->i2c, 0x39, 0x44, 0xCC); // prevent TX OCP default
s2mu106_update_reg(charger->i2c, 0x3A, 0x01, 0x03); // SET_Auto Async
msleep(20);
s2mu106_update_reg(charger->i2c, 0x30, 0x01, 0x03); // WCIN PATH OFF
} else {
pr_info("%s: OTG_TX_BUCK -> OTG or TX Abnormal\n", __func__);
}
} else if (set_val & REG_MODE_BST) {
s2mu106_update_reg(charger->i2c, S2MU106_CHG_CTRL0, BST_MODE, REG_MODE_MASK);
} else if (set_val & REG_MODE_BUCK_OFF_FOR_FLASH) {
/* async mode */
s2mu106_update_reg(charger->i2c, 0x3A, 0x03, 0x03);
usleep_range(1000, 1100);
s2mu106_update_reg(charger->i2c,
S2MU106_CHG_CTRL0, CHARGER_OFF_MODE, REG_MODE_MASK);
/* auto async mode */
s2mu106_update_reg(charger->i2c, 0x3A, 0x01, 0x03);
} else {
/*
* Regmode (CHG, BUCK, BUCK OFF)
* Do not set Auto Async mode before BUCK OFF mode
*/
if ((set_val & REG_MODE_CHG) || (set_val & REG_MODE_BUCK))
s2mu106_update_reg(charger->i2c, 0x3A, 0x01, 0x03); // SET_Auto Async
s2mu106_update_reg(charger->i2c,
S2MU106_CHG_CTRL0, set_val, REG_MODE_MASK);
s2mu106_update_reg(charger->i2c, 0x39, 0x55, 0xFF); // prevent OTG OCP default
}
mutex_unlock(&charger->regmode_mutex);
}
#if defined(CONFIG_WIRELESS_TX_MODE)
static void s2mu106_check_tx_before_otg_on(struct s2mu106_charger_data *charger)
{
union power_supply_propval value = {0,};
u8 reg_data;
mutex_lock(&charger->regmode_mutex);
/* check TX status */
s2mu106_read_reg(charger->i2c, S2MU106_CHG_CTRL0, &reg_data);
mutex_unlock(&charger->regmode_mutex);
reg_data &= REG_MODE_MASK;
if (reg_data & REG_MODE_TX) {
value.intval = BATT_TX_EVENT_WIRELESS_TX_OTG_ON;
psy_do_property("wireless", set,
POWER_SUPPLY_EXT_PROP_WIRELESS_TX_ERR, value);
}
}
#endif
static int s2mu106_check_wcin_before_otg_on(struct s2mu106_charger_data *charger)
{
union power_supply_propval value = {0,};
u8 reg_data;
int ret = 0;
ret = psy_do_property("wireless", get, POWER_SUPPLY_PROP_ONLINE, value);
if (ret < 0)
return -ENODEV;
if (value.intval)
return 0;
s2mu106_read_reg(charger->i2c, S2MU106_CHG_STATUS0, &reg_data);
if (!wcin_is_valid(reg_data))
return 0;
psy_do_property(charger->pdata->wireless_charger_name, get,
POWER_SUPPLY_PROP_ENERGY_NOW, value);
if (value.intval <= 0)
return -ENODEV;
value.intval = WIRELESS_VOUT_5V;
psy_do_property(charger->pdata->wireless_charger_name, set,
POWER_SUPPLY_PROP_INPUT_VOLTAGE_REGULATION, value);
return 1;
}
static int s2mu106_charger_otg_control(
struct s2mu106_charger_data *charger, bool enable)
{
union power_supply_propval value = {0,};
u8 chg_sts2, chg_ctrl0;
int ret = 0;
pr_info("%s: called charger otg control : %s\n", __func__,
enable ? "ON" : "OFF");
if (charger->otg_on == enable || lpcharge)
return 0;
if (charger->pdata->wireless_charger_name) {
#if defined(CONFIG_WIRELESS_TX_MODE)
s2mu106_check_tx_before_otg_on(charger);
#endif
ret = s2mu106_check_wcin_before_otg_on(charger);
pr_info("%s: wc_state = %d\n", __func__, ret);
if (ret < 0)
return ret;
}
mutex_lock(&charger->charger_mutex);
value.intval = enable;
charger->otg_on = enable;
if (!enable) {
regmode_vote(charger, REG_MODE_OTG, 0);
/* OTG Fault debounce time set 100us */
s2mu106_update_reg(charger->i2c, 0x94, 0x08, 0x0C);
psy_do_property("wireless", set,
POWER_SUPPLY_PROP_CHARGE_OTG_CONTROL, value);
#if defined(CONFIG_WIRELESS_CHARGER_MFC_S2MIW04)
/* wireless + otg -> wireless */
psy_do_property(charger->pdata->wireless_charger_name, set,
POWER_SUPPLY_EXT_PROP_WIRELESS_TXMODE_DISCON, value);
#endif
} else {
psy_do_property("wireless", set,
POWER_SUPPLY_PROP_CHARGE_OTG_CONTROL, value);
/* 1. OCP 1.2A setting */
s2mu106_update_reg(charger->i2c, S2MU106_CHG_CTRL3,
S2MU106_SET_OTG_TX_OCP_1200mA << SET_OTG_OCP_SHIFT, SET_OTG_OCP_MASK);
/* 2. OTG or TX switches are always ON */
s2mu106_update_reg(charger->i2c, S2MU106_CHG_CTRL3, 0x20, 0x30);
/* 3. Input s/w current sense off */
s2mu106_update_reg(charger->i2c, 0x3B, 0x0, 0x0C);
/* 4. 30ms delay */
msleep(30);
/* 5. QBAT On even if BAT OCP occurred */
s2mu106_update_reg(charger->i2c, S2MU106_CHG_CTRL9, 0x0, 0x10);
usleep_range(10000, 11000);
/* 6. OTG Enable */
regmode_vote(charger, REG_MODE_OTG, REG_MODE_OTG);
msleep(20);
/* OTG Fault debounce time set 15ms */
s2mu106_update_reg(charger->i2c, 0x94, 0x0C, 0x0C);
/* 7. OTG or TX switches are default */
s2mu106_update_reg(charger->i2c, S2MU106_CHG_CTRL3, 0x10, 0x30);
/* 8. Input s/w current sense on */
s2mu106_update_reg(charger->i2c, 0x3B, 0x04, 0x0C);
/* OCP detect W/A */
msleep(20);
psy_do_property("s2mu106_pmeter", get,
POWER_SUPPLY_PROP_VCHGIN, value);
if (value.intval < 4000) {
#ifdef CONFIG_USB_HOST_NOTIFY
struct otg_notify *o_notify;
o_notify = get_otg_notify();
if (o_notify)
send_otg_notify(o_notify, NOTIFY_EVENT_OVERCURRENT, 0);
#endif
pr_info("%s: bypass overcurrent limit\n", __func__);
}
}
mutex_unlock(&charger->charger_mutex);
s2mu106_read_reg(charger->i2c, S2MU106_CHG_STATUS2, &chg_sts2);
s2mu106_read_reg(charger->i2c, S2MU106_CHG_CTRL0, &chg_ctrl0);
pr_info("%s S2MU106_CHG_STATUS2: 0x%x\n", __func__, chg_sts2);
pr_info("%s S2MU106_CHG_CTRL0: 0x%x\n", __func__, chg_ctrl0);
power_supply_changed(charger->psy_otg);
return enable;
}
static void s2mu106_enable_charger_switch(
struct s2mu106_charger_data *charger, int onoff)
{
if (factory_mode) {
pr_info("%s: Skip in Factory Mode\n", __func__);
return;
}
if (onoff > 0) {
pr_info("[DEBUG]%s: turn on charger\n", __func__);
regmode_vote(charger, REG_MODE_CHG|REG_MODE_BUCK, REG_MODE_CHG|REG_MODE_BUCK);
/* timer fault set 16hr(max) */
s2mu106_update_reg(charger->i2c, S2MU106_CHG_CTRL13,
S2MU106_FC_CHG_TIMER_16hr << SET_TIME_FC_CHG_SHIFT,
SET_TIME_FC_CHG_MASK);
} else {
pr_info("[DEBUG] %s: turn off charger\n", __func__);
regmode_vote(charger, REG_MODE_CHG|REG_MODE_BUCK, REG_MODE_BUCK);
}
}
static void s2mu106_set_buck(
struct s2mu106_charger_data *charger, int enable)
{
int prev_current;
if (factory_mode) {
pr_info("%s: Skip in Factory Mode\n", __func__);
return;
}
if (enable) {
pr_info("[DEBUG]%s: set buck on\n", __func__);
s2mu106_enable_charger_switch(charger, charger->is_charging);
} else {
pr_info("[DEBUG]%s: set buck off (charger off mode)\n", __func__);
prev_current = s2mu106_get_input_current_limit(charger);
pr_info("[DEBUG]%s: check input current(%d, %d)\n",
__func__, prev_current, charger->input_current);
s2mu106_set_input_current_limit(charger, 50);
msleep(50);
/* async mode */
s2mu106_update_reg(charger->i2c, 0x3A, 0x03, 0x03);
msleep(50);
regmode_vote(charger, REG_MODE_CHG|REG_MODE_BUCK, 0);
/* auto async mode */
s2mu106_update_reg(charger->i2c, 0x3A, 0x01, 0x03);
s2mu106_set_input_current_limit(charger, prev_current);
}
}
static void s2mu106_set_regulation_vsys(
struct s2mu106_charger_data *charger, int vsys)
{
u8 data;
pr_info("[DEBUG]%s: VSYS regulation %d\n", __func__, vsys);
if (vsys <= 3700)
data = 0;
else if (vsys > 3700 && vsys <= 4400)
data = (vsys - 3700) / 100;
else
data = 0x07;
s2mu106_update_reg(charger->i2c,
S2MU106_CHG_CTRL8, data << SET_VSYS_SHIFT, SET_VSYS_MASK);
}
static void s2mu106_set_regulation_voltage(
struct s2mu106_charger_data *charger, int float_voltage)
{
u8 data;
if (factory_mode) {
pr_info("%s: Skip in Factory Mode\n", __func__);
return;
}
pr_info("[DEBUG]%s: float_voltage %d\n", __func__, float_voltage);
if (float_voltage <= 3900)
data = 0;
else if (float_voltage > 3900 && float_voltage <= 4530)
data = (float_voltage - 3900) / 5;
else
data = 0x7f;
s2mu106_update_reg(charger->i2c,
S2MU106_CHG_CTRL5, data << SET_VF_VBAT_SHIFT, SET_VF_VBAT_MASK);
}
static int s2mu106_get_regulation_voltage(struct s2mu106_charger_data *charger)
{
u8 reg_data = 0;
int float_voltage;
s2mu106_read_reg(charger->i2c, S2MU106_CHG_CTRL5, &reg_data);
reg_data &= 0x7F;
float_voltage = reg_data * 5 + 3900;
pr_debug("%s: battery cv reg : 0x%x, float voltage val : %d\n",
__func__, reg_data, float_voltage);
return float_voltage;
}
static void s2mu106_set_chgin_input_current(
struct s2mu106_charger_data *charger, int input_current)
{
u8 data;
if (input_current <= 100)
data = 0x02;
else if (input_current >= 3000)
data = 0x76;
else
data = (input_current - 50) / 25;
s2mu106_update_reg(charger->i2c, S2MU106_CHG_CTRL1,
data << INPUT_CURRENT_LIMIT_SHIFT, INPUT_CURRENT_LIMIT_MASK);
pr_info("[DEBUG]%s: current: %d(0x%x)\n",
__func__, input_current, data);
}
static void s2mu106_set_wcin_input_current(
struct s2mu106_charger_data *charger, int input_current)
{
u8 data;
if (input_current <= 100)
data = 0x02;
else if (input_current >= 2000)
data = 0x4E;
else
data = ((input_current - 125) / 25) + 3;
s2mu106_update_reg(charger->i2c, S2MU106_CHG_CTRL2,
data << INPUT_CURRENT_LIMIT_SHIFT, INPUT_CURRENT_LIMIT_MASK);
pr_info("[DEBUG]%s: current: %d(0x%x)\n",
__func__, input_current, data);
}
static void s2mu106_set_input_current_limit(
struct s2mu106_charger_data *charger, int input_current)
{
if (factory_mode) {
pr_info("%s: Skip in Factory Mode\n", __func__);
return;
}
if (is_wireless_type(charger->cable_type))
s2mu106_set_wcin_input_current(charger, input_current);
else
s2mu106_set_chgin_input_current(charger, input_current);
#if EN_TEST_READ
s2mu106_test_read(charger->i2c);
#endif
}
static int s2mu106_get_input_current_limit(struct s2mu106_charger_data *charger)
{
u8 data, reg;
int input_current = 0, ret = 0;
if (is_wireless_type(charger->cable_type))
reg = S2MU106_CHG_CTRL2;
else
reg = S2MU106_CHG_CTRL1;
ret = s2mu106_read_reg(charger->i2c, reg, &data);
if (ret < 0)
return ret;
data = data & INPUT_CURRENT_LIMIT_MASK;
if (is_wireless_type(charger->cable_type)) {
if (data > 0x4E) {
pr_err("%s: Invalid WCIN in register\n", __func__);
data = 0x4E;
}
input_current = ((data - 3) * 25) + 125;
} else {
if (data > 0x76) {
pr_err("%s: Invalid CHGIN in register\n", __func__);
data = 0x76;
}
input_current = (data * 25) + 50;
}
return input_current;
}
static void s2mu106_set_fast_charging_current(
struct s2mu106_charger_data *charger, int charging_current)
{
u8 data;
if (factory_mode) {
pr_info("%s: Skip in Factory Mode\n", __func__);
return;
}
if (charging_current <= 100)
data = 0x01;
else if (charging_current > 100 && charging_current <= 3200)
data = (charging_current / 50) - 1;
else
data = 0x3D;
s2mu106_update_reg(charger->i2c, S2MU106_CHG_CTRL7,
data << FAST_CHARGING_CURRENT_SHIFT, FAST_CHARGING_CURRENT_MASK);
pr_info("[DEBUG]%s: current %d, 0x%02x\n", __func__, charging_current, data);
#if EN_TEST_READ
s2mu106_test_read(charger->i2c);
#endif
}
static int s2mu106_get_fast_charging_current(
struct s2mu106_charger_data *charger)
{
u8 data;
int ret = 0;
ret = s2mu106_read_reg(charger->i2c, S2MU106_CHG_CTRL7, &data);
if (ret < 0)
return ret;
data = data & FAST_CHARGING_CURRENT_MASK;
if (data > 0x3F) {
pr_err("%s: Invalid fast charging current in register\n", __func__);
data = 0x3F;
}
return (data + 1) * 50;
}
static void s2mu106_set_wireless_input_current(
struct s2mu106_charger_data *charger, int input_current)
{
union power_supply_propval value;
wake_lock(&charger->wc_current_wake_lock);
if (is_wireless_type(charger->cable_type)) {
/* Wcurr-A) In cases of wireless input current change,
* configure the Vrect adj room to 270mV for safe wireless charging.
*/
wake_lock(&charger->wc_current_wake_lock);
value.intval = WIRELESS_VRECT_ADJ_ROOM_1; /* 270mV */
psy_do_property(charger->pdata->wireless_charger_name, set,
POWER_SUPPLY_PROP_INPUT_VOLTAGE_REGULATION, value);
msleep(500); /* delay 0.5sec */
charger->wc_pre_current = s2mu106_get_input_current_limit(charger);
charger->wc_current = input_current;
if (charger->wc_current > charger->wc_pre_current) {
s2mu106_set_fast_charging_current(charger, charger->charging_current);
#if defined(CONFIG_WIRELESS_CHARGER_MFC_S2MIW04)
value.intval = input_current;
psy_do_property(charger->pdata->wireless_charger_name, set,
POWER_SUPPLY_PROP_CURRENT_MAX, value);
#endif
}
}
queue_delayed_work(charger->charger_wqueue, &charger->wc_current_work, 0);
}
static void s2mu106_set_topoff_current(
struct s2mu106_charger_data *charger,
int eoc_1st_2nd, int current_limit)
{
int data;
union power_supply_propval value;
pr_info("[DEBUG]%s: current %d\n", __func__, current_limit);
if (current_limit <= 100)
data = 0;
else if (current_limit > 100 && current_limit <= 475)
data = (current_limit - 100) / 25;
else
data = 0x0F;
switch (eoc_1st_2nd) {
case 1:
s2mu106_update_reg(charger->i2c, S2MU106_CHG_CTRL10,
data << FIRST_TOPOFF_CURRENT_SHIFT, FIRST_TOPOFF_CURRENT_MASK);
if (!charger->psy_fg)
charger->psy_fg = power_supply_get_by_name(charger->pdata->fuelgauge_name);
if (!charger->psy_fg)
pr_err("%s, fail to set topoff current to FG\n", __func__);
else {
value.intval = current_limit;
power_supply_set_property(charger->psy_fg, POWER_SUPPLY_PROP_CURRENT_FULL, &value);
}
break;
case 2:
s2mu106_update_reg(charger->i2c, S2MU106_CHG_CTRL10,
data << SECOND_TOPOFF_CURRENT_SHIFT, SECOND_TOPOFF_CURRENT_MASK);
break;
default:
break;
}
}
static int s2mu106_get_topoff_setting(
struct s2mu106_charger_data *charger)
{
u8 data;
int ret = 0;
ret = s2mu106_read_reg(charger->i2c, S2MU106_CHG_CTRL10, &data);
if (ret < 0)
return ret;
data = data & FIRST_TOPOFF_CURRENT_MASK;
if (data > 0x0F)
data = 0x0F;
return data * 25 + 100;
}
static bool s2mu106_chg_init(struct s2mu106_charger_data *charger)
{
u8 temp;
if (!factory_mode) {
/* HW Factory OFF (at Normal booting) */
s2mu106_update_reg(charger->i2c, 0xF3, 0x00, 0x02);
pr_info("%s this is not factory mode! write 0xF3[1] = 0\n", __func__);
}
s2mu106_read_reg(charger->i2c, 0xF3, &temp);
pr_info("%s : 0xF3 register : 0x%2x\n", __func__, temp);
/* Set default regulation voltage 4.35v
* s2mu106_update_reg(charger->i2c,
* S2MU106_CHG_CTRL5, 0x5A << SET_VF_VBAT_SHIFT, SET_VF_VBAT_MASK);
*/
s2mu106_update_reg(charger->i2c, 0x8b, 0x00, 0x01 << 4);
/* To prevent entering watchdog issue case we set WDT_CLR to not clear before enabling WDT */
s2mu106_update_reg(charger->i2c, S2MU106_CHG_CTRL12, 0x00, WDT_CLR_MASK);
/* set watchdog timer to 80 seconds */
s2mu106_update_reg(charger->i2c, S2MU106_CHG_CTRL12,
S2MU106_WDT_TIMER_80s << WDT_TIME_SHIFT,
WDT_TIME_MASK);
/* enable Watchdog timer and only Charging off */
s2mu106_update_reg(charger->i2c, S2MU106_CHG_CTRL12,
ENABLE << SET_EN_WDT_SHIFT | DISABLE << SET_EN_WDT_AP_RESET_SHIFT,
SET_EN_WDT_MASK | SET_EN_WDT_AP_RESET_MASK);
s2mu106_read_reg(charger->i2c, S2MU106_CHG_CTRL12, &temp);
pr_info("%s : for WDT setting S2MU106_CHG_CTRL12 : 0x%x\n", __func__, temp);
if (charger->pdata->always_vssh_ldo_en) {
#ifndef CONFIG_SEC_FACTORY
/* VSSH LDO enable, even if vbusdet vol drop */
/* Can not be charged after ovp test W/A */
s2mu106_update_reg(charger->i2c, 0x3C, 0x30, 0x30);
#else
s2mu106_update_reg(charger->i2c, 0x3C, 0x10, 0x30);
#endif
} else {
s2mu106_update_reg(charger->i2c, 0x3C, 0x10, 0x30);
}
/* ICR Disable */
s2mu106_update_reg(charger->i2c, 0x7D, 0x02, 0x02);
/* 9V charging efficiency */
s2mu106_read_reg(charger->i2c, 0x9E, &charger->reg_0x9E);
/* Type-C reset off */
s2mu106_update_reg(charger->i2c, 0xEC, 0x00, 0x80);
/* Change 3 Level Buck OCP current */
s2mu106_update_reg(charger->i2c, 0x82, 0xF0, 0xF0);
s2mu106_write_reg(charger->i2c, 0xA3, 0x72);
s2mu106_write_reg(charger->i2c, 0xA4, 0x32);
/* change ramp delay 128usec 0x92[3:0] = 0x05 */
s2mu106_update_reg(charger->i2c, 0x92, 0x05, 0x0F);
/* OTG OCP 1200mA, TX OCP 1500mA */
s2mu106_update_reg(charger->i2c, S2MU106_CHG_CTRL3,
(S2MU106_SET_OTG_TX_OCP_1500mA << SET_TX_OCP_SHIFT) |
(S2MU106_SET_OTG_TX_OCP_1200mA << SET_OTG_OCP_SHIFT),
SET_TX_OCP_MASK | SET_OTG_OCP_MASK);
/* topoff timer 90mins */
s2mu106_update_reg(charger->i2c, S2MU106_CHG_CTRL14,
S2MU106_TOPOFF_TIMER_90m << TOP_OFF_TIME_SHIFT, TOP_OFF_TIME_MASK);
/* ivr debounce time(default 10ms -> 30ms) */
s2mu106_update_reg(charger->i2c, 0x95, 0x03, 0x03);
s2mu106_write_reg(charger->i2c, S2MU106_CHG_CTRL11, 0x16);
/* BAT_OCP 5.5A */
s2mu106_update_reg(charger->i2c, S2MU106_CHG_CTRL9, S2MU106_SET_BAT_OCP_5500mA, SET_BAT_OCP_MASK);
if (charger->pdata->chg_ocp_disable) {
/* BAT_OCP Qbat on */
/* do not power off when hw bat ocp occurred */
s2mu106_update_reg(charger->i2c, S2MU106_CHG_CTRL9,
0x00, BAT_OCP_QBATOFF_MASK);
pr_info("%s: BAT_OCP Qbat on\n", __func__);
}
#ifdef CONFIG_S2MU106_TYPEC_WATER
/* Prevent sudden power off when water detect */
if (!factory_mode) {
pr_info("%s: Normal booting\n", __func__);
s2mu106_update_reg(charger->i2c, 0x88, 0x20, 0x20);
s2mu106_write_reg(charger->i2c, 0xF3, 0x00);
s2mu106_update_reg(charger->i2c, 0x8C, 0x00, 0x80);
s2mu106_update_reg(charger->i2c, 0x90, 0x00, 0x04);
}
#endif
/* OTG Fault debounce time set 15ms */
s2mu106_update_reg(charger->i2c, 0x94, 0x0C, 0x0C);
if (charger->pdata->block_otg_psk_mode_en) {
/* Blocking OTG PSK mode in Light load */
s2mu106_update_reg(charger->i2c, 0xA6, 0x00, 0x0F);
}
if (charger->pdata->reduce_async_debounce_time) {
/* async mode debounce time 1ms, 0x9C[7:6] = 10 */
s2mu106_update_reg(charger->i2c, 0x9C, 0x80, 0xC0);
} else {
/* async mode debounce time 10ms, 0x9C[7:6] = 11 */
s2mu106_update_reg(charger->i2c, 0x9C, 0xC0, 0xC0);
}
return true;
}
static int s2mu106_get_charging_status(
struct s2mu106_charger_data *charger)
{
int status = POWER_SUPPLY_STATUS_UNKNOWN;
int ret;
u8 chg_sts0, chg_sts1;
union power_supply_propval value;
ret = s2mu106_read_reg(charger->i2c, S2MU106_CHG_STATUS0, &chg_sts0);
ret = s2mu106_read_reg(charger->i2c, S2MU106_CHG_STATUS1, &chg_sts1);
if (!charger->psy_fg)
charger->psy_fg = power_supply_get_by_name(charger->pdata->fuelgauge_name);
if (!charger->psy_fg)
return -EINVAL;
value.intval = SEC_BATTERY_CURRENT_MA;
ret = power_supply_get_property(charger->psy_fg, POWER_SUPPLY_PROP_CURRENT_AVG, &value);
if (ret < 0)
pr_err("%s: Fail to execute property\n", __func__);
if (ret < 0)
return status;
if (chg_sts1 & 0x80)
status = POWER_SUPPLY_STATUS_DISCHARGING;
else if (chg_sts1 & 0x02 || chg_sts1 & 0x01) {
pr_info("%s: full check curr_avg(%d), topoff_curr(%d)\n",
__func__, value.intval, charger->topoff_current);
if (value.intval < charger->topoff_current)
status = POWER_SUPPLY_STATUS_FULL;
else
status = POWER_SUPPLY_STATUS_CHARGING;
} else if ((chg_sts0 & 0xE0) == 0xA0 || (chg_sts0 & 0xE0) == 0x60)
status = POWER_SUPPLY_STATUS_CHARGING;
else
status = POWER_SUPPLY_STATUS_NOT_CHARGING;
#if EN_TEST_READ
s2mu106_test_read(charger->i2c);
#endif
return status;
}
static int s2mu106_get_charge_type(struct s2mu106_charger_data *charger)
{
int status = POWER_SUPPLY_CHARGE_TYPE_UNKNOWN;
u8 data;
int ret = 0;
ret = s2mu106_read_reg(charger->i2c, S2MU106_CHG_STATUS3, &data);
if (ret < 0)
pr_err("%s fail\n", __func__);
switch ((data & BAT_STATUS_MASK) >> BAT_STATUS_SHIFT) {
case 0x6:
case 0x2: /* pre-charge mode */
case 0x3: /* pre-charge mode */
status = POWER_SUPPLY_CHARGE_TYPE_FAST;
break;
}
if (charger->slow_charging)
status = POWER_SUPPLY_CHARGE_TYPE_SLOW;
return status;
}
static bool s2mu106_get_batt_present(struct s2mu106_charger_data *charger)
{
u8 data;
int ret = 0;
/*
* below operation was moved to bootloader.
* s2mu106_update_reg(charger->i2c, 0xF1, 0x01, 0x01);
*/
ret = s2mu106_read_reg(charger->i2c, S2MU106_CHG_STATUS3, &data);
if (ret < 0)
return false;
return (data & DET_BAT_STATUS_MASK) ? true : false;
}
static void s2mu106_set_charging_efficiency(struct s2mu106_charger_data *charger, int onoff)
{
u8 data;
cancel_delayed_work(&charger->pmeter_2lv_work);
cancel_delayed_work(&charger->pmeter_3lv_work);
if (onoff == 1) {
s2mu106_update_reg(charger->i2c, 0x9E,
(charger->reg_0x9E & 0xF0) >> 4, 0x0F);
s2mu106_update_reg(charger->i2c, 0xAD, 0x04, 0x1F);
s2mu106_read_reg(charger->i2c, 0x9E, &data);
pr_info("%s, 9V TA Setting! : 0x9E = 0x%2x(0x%2x)\n",
__func__, data, charger->reg_0x9E);
} else if (onoff == 2) {
s2mu106_update_reg(charger->i2c, 0xAD, 0x04, 0x1F);
} else {
s2mu106_update_reg(charger->i2c, 0x9E,
(charger->reg_0x9E & 0x0F), 0x0F);
s2mu106_update_reg(charger->i2c, 0xAD, 0x0F, 0x1F);
s2mu106_read_reg(charger->i2c, 0x9E, &data);
pr_info("%s, 5V TA Setting! : 0x9E = 0x%2x(0x%2x)\n",
__func__, data, charger->reg_0x9E);
}
s2mu106_read_reg(charger->i2c, 0xAD, &data);
pr_info("%s, 0xAD = 0x%2x\n", __func__, data);
}
static void s2mu106_wdt_clear(struct s2mu106_charger_data *charger)
{
u8 reg_data, chg_fault_status;
/* watchdog kick */
s2mu106_update_reg(charger->i2c, S2MU106_CHG_CTRL12,
0x1 << WDT_CLR_SHIFT, WDT_CLR_MASK);
s2mu106_read_reg(charger->i2c, S2MU106_CHG_STATUS1, &reg_data);
chg_fault_status = (reg_data & CHG_FAULT_STATUS_MASK) >> CHG_FAULT_STATUS_SHIFT;
if ((chg_fault_status == CHG_STATUS_WD_SUSPEND) ||
(chg_fault_status == CHG_STATUS_WD_RST)) {
pr_info("%s: watchdog error status(0x%02x,%d)\n",
__func__, reg_data, chg_fault_status);
if (charger->is_charging) {
pr_info("%s: toggle charger\n", __func__);
s2mu106_enable_charger_switch(charger, false);
s2mu106_enable_charger_switch(charger, true);
}
}
}
static int s2mu106_get_charging_health(struct s2mu106_charger_data *charger)
{
u8 data;
int ret = 0;
union power_supply_propval value;
if (charger->is_charging)
s2mu106_wdt_clear(charger);
ret = s2mu106_read_reg(charger->i2c, S2MU106_CHG_STATUS0, &data);
pr_info("[DEBUG] %s: S2MU106_CHG_STATUS0 0x%x\n", __func__, data);
if (ret < 0)
return POWER_SUPPLY_HEALTH_UNKNOWN;
data = (data & (CHGIN_STATUS_MASK)) >> CHGIN_STATUS_SHIFT;
switch (data) {
case 0x03:
case 0x05:
charger->ovp = false;
charger->unhealth_cnt = 0;
return POWER_SUPPLY_HEALTH_GOOD;
default:
break;
}
charger->unhealth_cnt++;
if (charger->unhealth_cnt < HEALTH_DEBOUNCE_CNT)
return POWER_SUPPLY_HEALTH_GOOD;
/* 005 need to check ovp & health count */
charger->unhealth_cnt = HEALTH_DEBOUNCE_CNT;
if (charger->ovp)
return POWER_SUPPLY_HEALTH_OVERVOLTAGE;
if (!charger->psy_bat)
charger->psy_bat = power_supply_get_by_name("battery");
if (!charger->psy_bat)
return -EINVAL;
ret = power_supply_get_property(charger->psy_bat, POWER_SUPPLY_PROP_ONLINE, &value);
if (ret < 0)
pr_err("%s: Fail to execute property\n", __func__);
if (value.intval == SEC_BATTERY_CABLE_PDIC)
return POWER_SUPPLY_HEALTH_UNDERVOLTAGE;
else
return POWER_SUPPLY_HEALTH_GOOD;
}
static int s2mu106_chg_get_property(struct power_supply *psy,
enum power_supply_property psp,
union power_supply_propval *val)
{
int chg_curr, aicr;
struct s2mu106_charger_data *charger =
power_supply_get_drvdata(psy);
enum power_supply_ext_property ext_psp = (enum power_supply_ext_property) psp;
u8 data;
switch (psp) {
case POWER_SUPPLY_PROP_ONLINE:
val->intval = charger->is_charging ? 1 : 0;
break;
case POWER_SUPPLY_PROP_STATUS:
val->intval = s2mu106_get_charging_status(charger);
break;
case POWER_SUPPLY_PROP_HEALTH:
val->intval = s2mu106_get_charging_health(charger);
break;
case POWER_SUPPLY_PROP_CURRENT_MAX:
val->intval = s2mu106_get_input_current_limit(charger);
break;
case POWER_SUPPLY_PROP_CURRENT_AVG:
case POWER_SUPPLY_PROP_CURRENT_NOW:
if (charger->charging_current) {
aicr = s2mu106_get_input_current_limit(charger);
chg_curr = s2mu106_get_fast_charging_current(charger);
val->intval = MINVAL(aicr, chg_curr);
} else
val->intval = 0;
break;
case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT:
val->intval = s2mu106_get_fast_charging_current(charger);
break;
case POWER_SUPPLY_PROP_CURRENT_FULL:
val->intval = s2mu106_get_topoff_setting(charger);
break;
case POWER_SUPPLY_PROP_CHARGE_TYPE:
val->intval = s2mu106_get_charge_type(charger);
break;
case POWER_SUPPLY_PROP_VOLTAGE_MAX:
val->intval = s2mu106_get_regulation_voltage(charger);
break;
case POWER_SUPPLY_PROP_PRESENT:
val->intval = s2mu106_get_batt_present(charger);
break;
case POWER_SUPPLY_PROP_CHARGING_ENABLED:
val->intval = charger->charge_mode;
break;
case POWER_SUPPLY_PROP_CHARGE_OTG_CONTROL:
mutex_lock(&charger->charger_mutex);
val->intval = charger->otg_on;
mutex_unlock(&charger->charger_mutex);
break;
case POWER_SUPPLY_PROP_MODEL_NAME:
val->intval = IC_TYPE_IFPMIC_S2MU106;
break;
case POWER_SUPPLY_PROP_MAX ... POWER_SUPPLY_EXT_PROP_MAX:
switch (ext_psp) {
case POWER_SUPPLY_EXT_PROP_CHIP_ID:
if (!s2mu106_read_reg(charger->i2c, S2MU106_REG_PMICID, &data)) {
val->intval = (data > 0 && data < 0xFF);
pr_info("%s : IF PMIC ver.0x%x\n", __func__,
data);
} else {
val->intval = 0;
pr_info("%s : IF PMIC I2C fail.\n", __func__);
}
break;
case POWER_SUPPLY_EXT_PROP_MONITOR_WORK:
s2mu106_test_read(charger->i2c);
break;
case POWER_SUPPLY_EXT_PROP_CHARGE_BOOST:
mutex_lock(&charger->regmode_mutex);
s2mu106_read_reg(charger->i2c, S2MU106_CHG_CTRL0, &data);
mutex_unlock(&charger->regmode_mutex);
data &= REG_MODE_MASK;
if (data & REG_MODE_OTG_TX)
val->intval = 1;
else
val->intval = 0;
break;
default:
return -EINVAL;
}
break;
default:
return -EINVAL;
}
return 0;
}
static void s2mu106_set_uno(struct s2mu106_charger_data *charger, int en)
{
u8 reg;
if (charger->otg_on) {
pr_info("%s: OTG ON, then skip UNO Control\n", __func__);
if (en) {
#if defined(CONFIG_WIRELESS_TX_MODE)
union power_supply_propval value = {0, };
psy_do_property("battery", get,
POWER_SUPPLY_EXT_PROP_WIRELESS_TX_ENABLE, value);
if (value.intval) {
regmode_vote(charger, REG_MODE_TX, 0);
value.intval = BATT_TX_EVENT_WIRELESS_TX_ETC;
psy_do_property("wireless", set, POWER_SUPPLY_EXT_PROP_WIRELESS_TX_ERR, value);
}
#endif
}
return;
}
s2mu106_read_reg(charger->i2c, S2MU106_CHG_STATUS0, &reg);
pr_info("%s: S2MU106_CHG_STATUS0(0x%x)\n", __func__, reg);
if (en && (reg & WCIN_STATUS_MASK)) {
pr_info("%s: WCIN is already valid by wireless charging, then skip UNO Control(0x%x)\n",
__func__, reg);
return;
}
if (en == SEC_BAT_CHG_MODE_UNO_ONLY) { /* this case, buck should be off */
/* OTG OCP 1200mA, TX OCP 1500mA */
s2mu106_update_reg(charger->i2c, S2MU106_CHG_CTRL3,
(S2MU106_SET_OTG_TX_OCP_1500mA << SET_TX_OCP_SHIFT),
SET_TX_OCP_MASK);
s2mu106_read_reg(charger->i2c, S2MU106_CHG_CTRL3, &reg);
pr_info("%s: S2MU106_CHG_CTRL3(0x%x)\n", __func__, reg);
charger->uno_on = true;
if (factory_mode) /* doesn`t support TX_CHGIN_BUCK_MODE when factory mode */
s2mu106_update_reg(charger->i2c, 0x30, 0x3, 0x3);
else {
regmode_vote(charger, REG_MODE_TX|REG_MODE_BUCK, REG_MODE_TX);
}
} else if (en) {
/* OTG OCP 1200mA, TX OCP 1500mA */
s2mu106_update_reg(charger->i2c, S2MU106_CHG_CTRL3,
(S2MU106_SET_OTG_TX_OCP_1500mA << SET_TX_OCP_SHIFT),
SET_TX_OCP_MASK);
s2mu106_read_reg(charger->i2c, S2MU106_CHG_CTRL3, &reg);
pr_info("%s: S2MU106_CHG_CTRL3(0x%x)\n", __func__, reg);
charger->uno_on = true;
if (factory_mode) /* doesn`t support TX_CHGIN_BUCK_MODE when factory mode */
s2mu106_update_reg(charger->i2c, 0x30, 0x3, 0x3);
else
regmode_vote(charger, REG_MODE_TX, REG_MODE_TX);
} else {
charger->uno_on = false;
if (factory_mode) /* recover to default (UNO mode W/A)*/
s2mu106_update_reg(charger->i2c, 0x30, 0x1, 0x3);
else
regmode_vote(charger, REG_MODE_TX, 0);
}
pr_info("%s: UNO(%d), OTG(%d)\n", __func__, charger->uno_on, charger->otg_on);
}
static void s2mu106_set_uno_vout(struct s2mu106_charger_data *charger, int vout)
{
u8 reg = 0x14; /* 5V */
if (vout == WC_TX_VOUT_OFF) {
pr_info("%s: set UNO default\n", __func__);
} else {
/* Set TX Vout(SET_VF_BOOST) */
reg += (vout * 10);
pr_info("%s: UNO VOUT (0x%x)\n", __func__, reg);
}
s2mu106_update_reg(charger->i2c, S2MU106_CHG_CTRL11,
reg << SET_VF_BOOST_SHIFT, SET_VF_BOOST_MASK);
s2mu106_read_reg(charger->i2c, S2MU106_CHG_CTRL11, &reg);
pr_info("@Tx_mode %s: CHG_CTRL11(0x%x)\n", __func__, reg);
}
static void s2mu106_set_mrstbtmr(struct s2mu106_charger_data *charger, int mrstbtmr)
{
u8 reg = 0;
if ((mrstbtmr == 0) || (mrstbtmr > 7)) {
pr_info("%s: Invalid MRSTBTMR setting %d, setting to default 7 seconds\n",
__func__, mrstbtmr);
mrstbtmr = 7;
}
reg = mrstbtmr - 1;
reg |= 0x08;
s2mu106_update_reg(charger->i2c, 0xE5, reg, 0x0F);
s2mu106_read_reg(charger->i2c, 0xE5, &reg);
pr_info("%s: MRSTB RESET 0xE5: 0x%x\n", __func__, reg);
}
static void s2mu106_change_charge_path(struct s2mu106_charger_data *charger, int path)
{
u8 reg;
if (is_wireless_type(path))
reg = SEL_PRIO_WCIN_SHIFT_MASK;
else
reg = 0;
s2mu106_update_reg(charger->i2c, S2MU106_CHG_CTRL3,
reg, SEL_PRIO_WCIN_SHIFT_MASK);
s2mu106_read_reg(charger->i2c, S2MU106_CHG_CTRL3, &reg);
pr_info("%s: CHG_CTRL3 (0x%x)\n", __func__, reg);
}
static int s2mu106_chg_set_property(struct power_supply *psy,
enum power_supply_property psp,
const union power_supply_propval *val)
{
struct s2mu106_charger_data *charger = power_supply_get_drvdata(psy);
enum power_supply_ext_property ext_psp = (enum power_supply_ext_property) psp;
int buck_state = ENABLE;
union power_supply_propval value;
int ret;
u8 data = 0;
u8 temp;
switch (psp) {
case POWER_SUPPLY_PROP_STATUS:
charger->status = val->intval;
break;
/* val->intval : type */
case POWER_SUPPLY_PROP_ONLINE:
charger->cable_type = val->intval;
charger->slow_charging = false;
charger->ivr_on = false;
s2mu106_change_charge_path(charger, charger->cable_type);
if (is_wireless_type(charger->cable_type)) {
/* Loop B/W 4khz -> 20kHz */
s2mu106_update_reg(charger->i2c, 0x75, 0x1, 0x0F);
s2mu106_update_reg(charger->i2c, 0x98, 0x0, 0x07);
} else {
/* Set default */
s2mu106_update_reg(charger->i2c, 0x75, 0x0A, 0x0F);
s2mu106_update_reg(charger->i2c, 0x98, 0x03, 0x07);
}
if (is_nocharge_type(charger->cable_type)) {
pr_err("[DEBUG]%s:[BATT] Type Battery\n", __func__);
regmode_vote(charger, REG_MODE_BUCK_OFF_FOR_FLASH | REG_MODE_BST, 0);
value.intval = 0;
} else {
value.intval = 1;
}
if (!charger->psy_fg)
charger->psy_fg = power_supply_get_by_name(charger->pdata->fuelgauge_name);
if (!charger->psy_fg)
return -EINVAL;
ret = power_supply_set_property(charger->psy_fg, POWER_SUPPLY_PROP_ENERGY_AVG, &value);
if (ret < 0)
pr_err("%s: Fail to execute property\n", __func__);
if (is_nocharge_type(charger->cable_type)) {
/* At cable removal enable IVR IRQ if it was disabled */
if (charger->irq_ivr_enabled == 0) {
u8 reg_data;
charger->irq_ivr_enabled = 1;
/* Unmask IRQ */
s2mu106_update_reg(charger->i2c, S2MU106_CHG_INT2M,
0 << IVR_M_SHIFT, IVR_M_MASK);
enable_irq(charger->irq_ivr);
s2mu106_read_reg(charger->i2c, S2MU106_CHG_INT2M, &reg_data);
pr_info("%s : enable ivr : 0x%x\n", __func__, reg_data);
}
}
break;
case POWER_SUPPLY_PROP_CURRENT_MAX:
{
int input_current = val->intval;
if (is_wireless_type(charger->cable_type))
s2mu106_set_wireless_input_current(charger, input_current);
else
s2mu106_set_input_current_limit(charger, input_current);
if (is_nocharge_type(charger->cable_type))
s2mu106_set_wireless_input_current(charger, input_current);
charger->input_current = input_current;
}
break;
case POWER_SUPPLY_PROP_CURRENT_AVG:
charger->charging_current = val->intval;
s2mu106_set_fast_charging_current(charger, charger->charging_current);
break;
case POWER_SUPPLY_PROP_CURRENT_NOW:
pr_info("[DEBUG] %s: is_charging %d\n", __func__, charger->is_charging);
charger->charging_current = val->intval;
/* set charging current */
if (is_not_wireless_type(charger->cable_type))
s2mu106_set_fast_charging_current(charger, charger->charging_current);
break;
case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT:
break;
case POWER_SUPPLY_PROP_CURRENT_FULL:
charger->topoff_current = val->intval;
if (charger->pdata->chg_eoc_dualpath) {
s2mu106_set_topoff_current(charger, 1, val->intval);
s2mu106_set_topoff_current(charger, 2, 100);
} else
s2mu106_set_topoff_current(charger, 1, val->intval);
break;
case POWER_SUPPLY_PROP_VOLTAGE_MAX:
pr_info("[DEBUG]%s: float voltage(%d)\n", __func__, val->intval);
charger->pdata->chg_float_voltage = val->intval;
s2mu106_set_regulation_voltage(charger,
charger->pdata->chg_float_voltage);
break;
case POWER_SUPPLY_PROP_CHARGE_OTG_CONTROL:
s2mu106_charger_otg_control(charger, val->intval);
break;
case POWER_SUPPLY_PROP_CHARGE_UNO_CONTROL:
pr_info("%s: WCIN-UNO %d\n", __func__, val->intval);
s2mu106_set_uno(charger, val->intval);
break;
case POWER_SUPPLY_PROP_CHARGING_ENABLED:
charger->charge_mode = val->intval;
switch (charger->charge_mode) {
case SEC_BAT_CHG_MODE_BUCK_OFF:
buck_state = DISABLE;
case SEC_BAT_CHG_MODE_CHARGING_OFF:
charger->is_charging = false;
break;
case SEC_BAT_CHG_MODE_CHARGING:
charger->is_charging = true;
break;
}
if (buck_state)
s2mu106_enable_charger_switch(charger, charger->is_charging);
else
s2mu106_set_buck(charger, buck_state);
break;
case POWER_SUPPLY_PROP_CHARGE_CONTROL_LIMIT_MAX:
{
u8 ivr_state = 0;
s2mu106_read_reg(charger->i2c, S2MU106_CHG_STATUS5, &ivr_state);
if (ivr_state & IVR_STATUS) {
wake_lock(&charger->ivr_wake_lock);
/* Mask IRQ */
s2mu106_update_reg(charger->i2c,
S2MU106_CHG_INT2M, 1 << IVR_M_SHIFT, IVR_M_MASK);
queue_delayed_work(charger->charger_wqueue, &charger->ivr_work,
msecs_to_jiffies(IVR_WORK_DELAY));
}
}
break;
#ifndef CONFIG_SEC_FACTORY
case POWER_SUPPLY_PROP_FACTORY_MODE:
if (val->intval) {
pr_info("%s : 523K, 301K, 255K\n", __func__);
s2mu106_update_reg(charger->i2c, 0x88, 0x00, 0x20);
s2mu106_write_reg(charger->i2c, 0xF3, 0x06);
s2mu106_update_reg(charger->i2c, 0x8C, 0x80, 0x80);
s2mu106_update_reg(charger->i2c, 0x90, 0x04, 0x04);
} else {
pr_info("%s : 619K, OPEN\n", __func__);
s2mu106_update_reg(charger->i2c, 0x88, 0x20, 0x20);
s2mu106_write_reg(charger->i2c, 0xF3, 0x00);
s2mu106_update_reg(charger->i2c, 0x8C, 0x00, 0x80);
s2mu106_update_reg(charger->i2c, 0x90, 0x00, 0x04);
}
break;
#endif
case POWER_SUPPLY_PROP_2LV_3LV_CHG_MODE:
cancel_delayed_work(&charger->pmeter_2lv_work);
cancel_delayed_work(&charger->pmeter_3lv_work);
if (val->intval) {
pr_info("%s : 5V->9V\n", __func__);
s2mu106_update_reg(charger->i2c, 0xAD, 0x04, 0x1F);
queue_delayed_work(charger->charger_wqueue,
&charger->pmeter_3lv_work, msecs_to_jiffies(5000));
} else {
pr_info("%s : 9V->5V or detach\n", __func__);
s2mu106_update_reg(charger->i2c, 0xAD, 0x0F, 0x1F);
queue_delayed_work(charger->charger_wqueue,
&charger->pmeter_2lv_work, msecs_to_jiffies(5000));
}
break;
case POWER_SUPPLY_PROP_PM_VCHGIN:
s2mu106_set_charging_efficiency(charger, val->intval);
break;
case POWER_SUPPLY_PROP_ENERGY_NOW:
if (val->intval) {
/* forced set buck on /charge off in 523k case */
regmode_vote(charger, REG_MODE_CHG|REG_MODE_BUCK, REG_MODE_BUCK);
/* ICR 2A(*2A: TA Target, can be changed */
s2mu106_update_reg(charger->i2c, S2MU106_CHG_CTRL1, 0x4E, 0x7F);
s2mu106_read_reg(charger->i2c, 0xF3, &temp);
pr_info("%s : 0xF3 register : 0x%2x\n", __func__, temp);
/* 200msec delay */
msleep(200);
#if defined(CONFIG_LEDS_S2MU106_FLASH)
/* FLED driver TA only mode set, 0x5C[7:6] -> 0x02*/
s2mu106_fled_set_operation_mode(1);
#endif
pr_info("%s: Set Factory Mode (vbus + 523K / 301K)\n", __func__);
/* SYS Output 4.0V Set*/
s2mu106_update_reg(charger->i2c, 0x20, 0x03, 0x07);
/* Output Select applied */
s2mu106_update_reg(charger->i2c, 0x20, 0x80, 0x80);
/* ICR Disable at Factory Mode */
s2mu106_update_reg(charger->i2c, 0x7D, 0x02, 0x02);
/* EN_MRST, MRSTBTMR default setting in factory mode 1.0s (can be changed) */
s2mu106_set_mrstbtmr(charger, charger->pdata->mrstbtmr_factory);
/* RST_SW_CHG (CHG VIO Reset Off) */
s2mu106_update_reg(charger->i2c, 0xEF, 0x0, 0x1);
/* QBAT OFF */
s2mu106_update_reg(charger->i2c, 0x2F, 0xC0, 0xC0);
s2mu106_update_reg(charger->i2c, 0x8B, 0x00, 0x08);
s2mu106_update_reg(charger->i2c, 0x38, 0x00, 0x03);
/* HW Factory ON */
s2mu106_update_reg(charger->i2c, 0xF3, 0x02, 0x02);
s2mu106_read_reg(charger->i2c, 0xF3, &temp);
pr_info("%s : 0xF3 register : 0x%2x\n", __func__, temp);
/* Switchingfor fuel gauge to get SYS voltage */
value.intval = SEC_BAT_FGSRC_SWITCHING_VSYS;
psy_do_property("s2mu106-fuelgauge", set,
POWER_SUPPLY_EXT_PROP_FGSRC_SWITCHING, value);
} else {
pr_info("%s: Release Factory Mode (vbus + 619K)\n", __func__);
/* HW Factory OFF */
s2mu106_update_reg(charger->i2c, 0xF3, 0x00, 0x02);
pr_info("%s 0xF3[1] = 0\n", __func__);
#if defined(CONFIG_LEDS_S2MU106_FLASH)
/* FLED driver Auto control mode set, 0x5C[7:6] -> 0x00*/
s2mu106_fled_set_operation_mode(0);
#endif
/* QBATON */
s2mu106_update_reg(charger->i2c, 0x2F, 0x40, 0xC0);
s2mu106_update_reg(charger->i2c, 0x8B, 0x08, 0x08);
s2mu106_update_reg(charger->i2c, 0x38, 0x01, 0x03);
/* EN_MRST, MRSTBTMR7.0s */
s2mu106_update_reg(charger->i2c, 0xE5, 0x0E, 0x0F);
/* ICR Enable */
s2mu106_update_reg(charger->i2c, 0x7D, 0x00, 0x02);
/* ICR2A(*2A: VBUS+619k condition, can be changed) */
s2mu106_update_reg(charger->i2c, S2MU106_CHG_CTRL1, 0x46, 0x7F);
/* SYS Output Return */
s2mu106_set_regulation_vsys(charger, 4400);
/* RST_SW_CHG (CHG VIO Reset On) because of MRST */
s2mu106_update_reg(charger->i2c, 0xEF, 0x1, 0x1);
/* Switching for fuel gauge to get Battery voltage */
value.intval = SEC_BAT_FGSRC_SWITCHING_VBAT;
psy_do_property("s2mu106-fuelgauge", set,
POWER_SUPPLY_EXT_PROP_FGSRC_SWITCHING, value);
/* recover to default (UNO mode W/A)*/
s2mu106_update_reg(charger->i2c, 0x30, 0x1, 0x3);
}
break;
case POWER_SUPPLY_PROP_INPUT_VOLTAGE_REGULATION:
if (val->intval) {
/* VBUS UVLO Disable(VBUS Input IR Drop) */
pr_info("%s: Relieve VBUS2BAT\n", __func__);
s2mu106_update_reg(charger->i2c, 0x39, 0xC0, 0xC0);
}
break;
case POWER_SUPPLY_PROP_AUTHENTIC:
/* by AT CMD */
if (val->intval) {
pr_info("%s: set Bypass mode for leakage current(power off)\n", __func__);
/* Bypass Mode Enable */
s2mu106_update_reg(charger->i2c, S2MU106_CHG_CTRL0, 0x10, 0x30);
s2mu106_write_reg(charger->i2c, 0x6E, 0x00);
s2mu106_update_reg(charger->i2c, 0x88, 0x20, 0x20);
s2mu106_update_reg(charger->i2c, S2MU106_CHG_CTRL0, 0x30, 0x30);
/* QBAT OFF */
s2mu106_update_reg(charger->i2c, 0x2F, 0xC0, 0xC0);
s2mu106_update_reg(charger->i2c, 0x8B, 0x00, 0x08);
s2mu106_update_reg(charger->i2c, 0x38, 0x00, 0x03);
/* EN_MRST, MRSTBTMR8.0s */
s2mu106_update_reg(charger->i2c, 0xE5, 0x0F, 0x0F);
/* RST_SW_CHG */
s2mu106_update_reg(charger->i2c, 0xEF, 0x00, 0x01);
/* ULDO Off */
s2mu106_update_reg(charger->i2c, 0xE4, 0x00, 0x80);
/* INOK Off */
s2mu106_update_reg(charger->i2c, 0xEA, 0x80, 0x80);
/* CHGIN_UVLO_MUIC_OFF */
s2mu106_update_reg(charger->i2c, 0x72, 0x00, 0x80);
/* CC Detach Operation w/o VBUS */
psy_do_property("s2mu106-usbpd", set,
POWER_SUPPLY_PROP_AUTHENTIC, value);
/* PM Disable */
psy_do_property("s2mu106_pmeter", set,
POWER_SUPPLY_PROP_PM_FACTORY, value);
pr_info("%s: complete\n", __func__);
} else {
pr_info("%s: release Bypass mode, set off\n", __func__);
/* All_OFF */
s2mu106_update_reg(charger->i2c, S2MU106_CHG_CTRL0, 0x00, 0x0F);
/* Bypass Mode Disable */
s2mu106_update_reg(charger->i2c, 0x88, 0x00, 0x20);
}
break;
case POWER_SUPPLY_PROP_FUELGAUGE_RESET:
s2mu106_read_reg(charger->i2c, 0xE3, &data);
data |= 0x03 << 6;
s2mu106_write_reg(charger->i2c, 0xE3, data);
msleep(1000);
data &= ~(0x03 << 6);
s2mu106_write_reg(charger->i2c, 0xE3, data);
msleep(50);
pr_info("%s: reset fuelgauge when surge occur!\n", __func__);
break;
case POWER_SUPPLY_PROP_ENERGY_AVG:
regmode_vote(charger, REG_MODE_BUCK_OFF_FOR_FLASH, REG_MODE_BUCK_OFF_FOR_FLASH);
if (val->intval) {
pr_info("[DEBUG]%s: FLED turn on charger driver\n", __func__);
usleep_range(1000, 1100);
// regmode_vote(charger, REG_MODE_BUCK_OFF_FOR_FLASH | REG_MODE_BST, REG_MODE_BST);
} else {
pr_info("[DEBUG]%s: FLED turn off charger driver\n", __func__);
regmode_vote(charger, REG_MODE_BUCK_OFF_FOR_FLASH | REG_MODE_BST, 0);
}
break;
case POWER_SUPPLY_PROP_MAX ... POWER_SUPPLY_EXT_PROP_MAX:
switch (ext_psp) {
case POWER_SUPPLY_EXT_PROP_FACTORY_VOLTAGE_REGULATION:
/* enable EN_JIG_AP */
pr_info("%s: factory voltage regulation (%d)\n", __func__, val->intval);
s2mu106_set_regulation_vsys(charger, val->intval);
s2mu106_update_reg(charger->i2c, S2MU106_CHG_CTRL8,
1 << EN_JIG_REG_AP_SHIFT, EN_JIG_REG_AP_MASK);
break;
case POWER_SUPPLY_EXT_PROP_CURRENT_MEASURE:
/* by keystring */
if (val->intval) {
pr_info("%s: set Bypass mode for current measure(power on)\n", __func__);
/*
* Charger/muic interrupt can occur by entering Bypass mode
* Disable all interrupt mask for testing current measure.
*/
#ifndef CONFIG_SEC_FACTORY
if (charger->pdata->always_vssh_ldo_en) {
/* VSSH LDO default setting */
/* Can not be charged after ovp test W/A */
s2mu106_update_reg(charger->i2c, 0x3C, 0x10, 0x30);
}
#endif
/* PM Disable */
psy_do_property("s2mu106_pmeter", set,
POWER_SUPPLY_PROP_PM_FACTORY, value);
value.intval = SEC_BAT_FGSRC_SWITCHING_VSYS;
psy_do_property("s2mu106-fuelgauge", set,
POWER_SUPPLY_EXT_PROP_FGSRC_SWITCHING, value);
value.intval = true;
psy_do_property("muic-manager", set,
POWER_SUPPLY_PROP_PM_FACTORY, value);
/* VBUS UVLO Disable(VBUS Input IR Drop) */
s2mu106_update_reg(charger->i2c, 0x39, 0xC0, 0xC0);
/* Bypass Mode Enable */
s2mu106_update_reg(charger->i2c, 0x88, 0x20, 0x20);
s2mu106_write_reg(charger->i2c, 0x6E, 0x00);
s2mu106_update_reg(charger->i2c, S2MU106_CHG_CTRL0, 0x30, 0x30);
/* QBAT off for prevent SMPL when detach cable */
s2mu106_update_reg(charger->i2c, 0x2F, 0xC0, 0xC0);
s2mu106_update_reg(charger->i2c, 0x8B, 0x00, 0x08);
s2mu106_update_reg(charger->i2c, 0x38, 0x00, 0x03);
/* EN_MRST, MRSTBTMR default setting in factory mode 1.0s (can be changed) */
s2mu106_set_mrstbtmr(charger, charger->pdata->mrstbtmr_factory);
/* RST_SW_CHG (CHG VIO Reset Off) */
s2mu106_update_reg(charger->i2c, 0xEF, 0x0, 0x1);
} else {
pr_info("%s: Bypass exit for current measure\n", __func__);
#ifndef CONFIG_SEC_FACTORY
if (charger->pdata->always_vssh_ldo_en) {
/* VSSH LDO enable, even if vbusdet vol drop */
/* Can not be charged after ovp test W/A */
s2mu106_update_reg(charger->i2c, 0x3C, 0x30, 0x30);
}
#endif
value.intval = SEC_BAT_FGSRC_SWITCHING_VBAT;
psy_do_property("s2mu106-fuelgauge", set,
POWER_SUPPLY_EXT_PROP_FGSRC_SWITCHING, value);
/* All_OFF */
s2mu106_update_reg(charger->i2c, S2MU106_CHG_CTRL0, 0x00, 0x0F);
/* Bypass Mode Disable */
s2mu106_update_reg(charger->i2c, 0x88, 0x00, 0x20);
}
break;
case POWER_SUPPLY_EXT_PROP_DISABLE_FACTORY_MODE:
/* disable factory mode */
break;
case POWER_SUPPLY_EXT_PROP_WIRELESS_TX_VOUT:
s2mu106_set_uno_vout(charger, val->intval);
break;
case POWER_SUPPLY_EXT_PROP_WIRELESS_TX_IOUT:
break;
case POWER_SUPPLY_EXT_PROP_ENABLE_HW_FACTORY_MODE:
pr_info("%s : HW Factory Enable\n", __func__);
s2mu106_update_reg(charger->i2c, 0xF3, 0x02, 0x02);
s2mu106_update_reg(charger->i2c, 0x88, 0x00, 0x04);
break;
default:
return -EINVAL;
}
break;
default:
return -EINVAL;
}
return 0;
}
static int s2mu106_otg_get_property(struct power_supply *psy,
enum power_supply_property psp,
union power_supply_propval *val)
{
struct s2mu106_charger_data *charger = power_supply_get_drvdata(psy);
u8 reg;
switch (psp) {
case POWER_SUPPLY_PROP_ONLINE:
mutex_lock(&charger->charger_mutex);
val->intval = charger->otg_on;
mutex_unlock(&charger->charger_mutex);
break;
case POWER_SUPPLY_PROP_CHARGE_POWERED_OTG_CONTROL:
s2mu106_read_reg(charger->i2c, S2MU106_CHG_STATUS2, &reg);
pr_info("%s: S2MU106_CHG_STATUS2 : 0x%X\n", __func__, reg);
if ((reg & 0xC0) == 0x80)
val->intval = 1;
else
val->intval = 0;
s2mu106_read_reg(charger->i2c, S2MU106_CHG_CTRL0, &reg);
pr_info("%s: S2MU106_CHG_CTRL0 : 0x%X\n", __func__, reg);
break;
default:
return -EINVAL;
}
return 0;
}
static int s2mu106_otg_set_property(struct power_supply *psy,
enum power_supply_property psp,
const union power_supply_propval *val)
{
struct s2mu106_charger_data *charger = power_supply_get_drvdata(psy);
union power_supply_propval value;
int ret;
switch (psp) {
case POWER_SUPPLY_PROP_ONLINE:
if (!mfc_fw_update) {
value.intval = val->intval;
pr_info("%s: OTG %s\n", __func__, value.intval > 0 ? "ON" : "OFF");
psy = power_supply_get_by_name(charger->pdata->charger_name);
if (!psy)
return -EINVAL;
ret = power_supply_set_property(psy, POWER_SUPPLY_PROP_CHARGE_OTG_CONTROL, &value);
if (ret < 0)
pr_err("%s: Fail to execute property\n", __func__);
power_supply_changed(charger->psy_otg);
} else {
pr_info("%s : skip setting otg, mfc_fw_update(%d)\n",
__func__, mfc_fw_update);
}
break;
default:
return -EINVAL;
}
return 0;
}
static void s2mu106_charger_otg_vbus_work(struct work_struct *work)
{
struct s2mu106_charger_data *charger = container_of(work,
struct s2mu106_charger_data,
otg_vbus_work.work);
u8 val = 0;
#ifdef CONFIG_USB_HOST_NOTIFY
struct otg_notify *o_notify;
o_notify = get_otg_notify();
#endif
s2mu106_read_reg(charger->i2c, S2MU106_CHG_STATUS2, &val);
pr_info("%s - 1, 0x%02x\n", __func__, val);
if ((val & OTG_STATUS_MASK) == 0x80) {
/* Try to read the OTG Status after 30ms. */
msleep(30);
s2mu106_read_reg(charger->i2c, S2MU106_CHG_STATUS2, &val);
pr_info("%s - 2, 0x%02x\n", __func__, val);
if ((val & 0xC0) == 0x80) {
pr_info("%s: bypass overcurrent limit\n", __func__);
#ifdef CONFIG_USB_HOST_NOTIFY
if (o_notify)
send_otg_notify(o_notify, NOTIFY_EVENT_OVERCURRENT, 0);
#endif
}
}
s2mu106_write_reg(charger->i2c, S2MU106_CHG_CTRL11, 0x16);
}
#if EN_BAT_DET_IRQ
/* s2mu106 interrupt service routine */
static irqreturn_t s2mu106_det_bat_isr(int irq, void *data)
{
struct s2mu106_charger_data *charger = data;
u8 val;
s2mu106_read_reg(charger->i2c, S2MU106_CHG_STATUS3, &val);
if ((val & DET_BAT_STATUS_MASK) == 0) {
s2mu106_set_buck(charger, 0);
pr_err("charger-off if battery removed\n");
}
return IRQ_HANDLED;
}
#endif
static irqreturn_t s2mu106_done_isr(int irq, void *data)
{
struct s2mu106_charger_data *charger = data;
u8 val;
s2mu106_read_reg(charger->i2c, S2MU106_CHG_STATUS1, &val);
pr_info("%s , %02x\n", __func__, val);
if (val & (DONE_STATUS_MASK)) {
pr_err("add self chg done\n");
/* add chg done code here */
}
return IRQ_HANDLED;
}
static irqreturn_t s2mu106_chg_isr(int irq, void *data)
{
struct s2mu106_charger_data *charger = data;
u8 val;
s2mu106_read_reg(charger->i2c, S2MU106_CHG_STATUS0, &val);
pr_info("%s , %02x\n", __func__, val);
return IRQ_HANDLED;
}
static irqreturn_t s2mu106_event_isr(int irq, void *data)
{
struct s2mu106_charger_data *charger = data;
union power_supply_propval value;
u8 val;
u8 fault;
s2mu106_read_reg(charger->i2c, S2MU106_CHG_STATUS1, &val);
pr_info("%s , %02x\n", __func__, val);
fault = (val & CHG_FAULT_STATUS_MASK) >> CHG_FAULT_STATUS_SHIFT;
if (fault == CHG_STATUS_WD_SUSPEND || fault == CHG_STATUS_WD_RST) {
value.intval = 1;
pr_info("%s, reset USBPD\n", __func__);
psy_do_property("s2mu106-usbpd", set,
POWER_SUPPLY_PROP_USBPD_RESET, value);
}
return IRQ_HANDLED;
}
#if defined(CONFIG_WIRELESS_TX_MODE)
static irqreturn_t s2mu106_tx_isr(int irq, void *data)
{
struct s2mu106_charger_data *charger = data;
u8 reg_data = 0;
pr_info("%s: irq(%d)\n", __func__, irq);
s2mu106_read_reg(charger->i2c, S2MU106_CHG_STATUS2, &reg_data);
if ((reg_data & TX_STATUS_MASK) == 0x20) {
union power_supply_propval val;
pr_info("%s: CHG_STATUS2(0x%02x)\n", __func__, reg_data);
pr_info("%s: tx overcurrent limit\n", __func__);
regmode_vote(charger, REG_MODE_TX, 0);
val.intval = BATT_TX_EVENT_WIRELESS_TX_OCP;
psy_do_property("wireless", set,
POWER_SUPPLY_EXT_PROP_WIRELESS_TX_ERR, val);
s2mu106_write_reg(charger->i2c, S2MU106_CHG_CTRL11, 0x16);
}
return IRQ_HANDLED;
}
#endif
static irqreturn_t s2mu106_otg_isr(int irq, void *data)
{
struct s2mu106_charger_data *charger = data;
queue_delayed_work(charger->charger_wqueue, &charger->otg_vbus_work, 0);
return IRQ_HANDLED;
}
static irqreturn_t s2mu106_bat_isr(int irq, void *data)
{
struct s2mu106_charger_data *charger = data;
u8 val = 0;
s2mu106_read_reg(charger->i2c, S2MU106_CHG_STATUS3, &val);
pr_info("%s - 1, 0x%02x\n", __func__, val);
if (val & 0x02) {
regmode_vote(charger, REG_MODE_OTG_TX, 0);
if (charger->otg_on)
s2mu106_update_reg(charger->i2c, S2MU106_CHG_CTRL9, 0x10, 0x10);
}
/* OTG Fault debounce time set 100us */
s2mu106_update_reg(charger->i2c, 0x94, 0x08, 0x0C);
return IRQ_HANDLED;
}
static irqreturn_t s2mu106_ovp_isr(int irq, void *data)
{
struct s2mu106_charger_data *charger = data;
u8 val;
s2mu106_read_reg(charger->i2c, S2MU106_CHG_STATUS0, &val);
pr_info("%s ovp %02x\n", __func__, val);
return IRQ_HANDLED;
}
static bool s2mu106_check_slow_charging(struct s2mu106_charger_data *charger,
int input_current)
{
pr_info("%s: charger->cable_type %d, input_current %d\n",
__func__, charger->cable_type, input_current);
/* under 400mA considered as slow charging concept for VZW */
if (input_current <= charger->pdata->slow_charging_current &&
!is_nocharge_type(charger->cable_type)) {
union power_supply_propval value;
charger->slow_charging = true;
pr_info("%s: slow charging on : input current(%dmA), cable type(%d)\n",
__func__, input_current, charger->cable_type);
value.intval = POWER_SUPPLY_CHARGE_TYPE_SLOW;
psy_do_property("battery", set,
POWER_SUPPLY_PROP_CHARGE_TYPE, value);
} else
charger->slow_charging = false;
return charger->slow_charging;
}
static void reduce_input_current(struct s2mu106_charger_data *charger)
{
int old_input_current, new_input_current;
u8 data, reg;
old_input_current = s2mu106_get_input_current_limit(charger);
new_input_current = (old_input_current > MINIMUM_INPUT_CURRENT + REDUCE_CURRENT_STEP) ?
(old_input_current - REDUCE_CURRENT_STEP) : MINIMUM_INPUT_CURRENT;
if (old_input_current <= new_input_current) {
pr_info("%s: Same or less new input current:(%d, %d, %d)\n", __func__,
old_input_current, new_input_current, charger->input_current);
} else {
pr_info("%s: input currents:(%d, %d, %d)\n", __func__,
old_input_current, new_input_current, charger->input_current);
if (is_wireless_type(charger->cable_type)) {
reg = S2MU106_CHG_CTRL2;
data = ((new_input_current - 125) / 25) + 3;
} else {
reg = S2MU106_CHG_CTRL1;
data = (new_input_current - 50) / 25;
}
s2mu106_update_reg(charger->i2c, reg,
data << INPUT_CURRENT_LIMIT_SHIFT, INPUT_CURRENT_LIMIT_MASK);
charger->input_current = s2mu106_get_input_current_limit(charger);
}
charger->ivr_on = true;
}
static void s2mu106_ivr_irq_work(struct work_struct *work)
{
struct s2mu106_charger_data *charger = container_of(work,
struct s2mu106_charger_data, ivr_work.work);
u8 ivr_state;
int ret;
int ivr_cnt = 0;
pr_info("%s:\n", __func__);
if (is_nocharge_type(charger->cable_type)) {
u8 ivr_mask;
pr_info("%s : skip\n", __func__);
s2mu106_read_reg(charger->i2c, S2MU106_CHG_INT2M, &ivr_mask);
if (ivr_mask & 0x02) {
/* Unmask IRQ */
s2mu106_update_reg(charger->i2c, S2MU106_CHG_INT2M,
0 << IVR_M_SHIFT, IVR_M_MASK);
}
wake_unlock(&charger->ivr_wake_lock);
return;
}
ret = s2mu106_read_reg(charger->i2c, S2MU106_CHG_STATUS5, &ivr_state);
if (ret < 0) {
wake_unlock(&charger->ivr_wake_lock);
pr_info("%s : I2C error\n", __func__);
/* Unmask IRQ */
s2mu106_update_reg(charger->i2c, S2MU106_CHG_INT2M,
0 << IVR_M_SHIFT, IVR_M_MASK);
return;
}
pr_info("%s: ivr_status 0x13:0x%02x\n", __func__, ivr_state);
mutex_lock(&charger->charger_mutex);
while ((ivr_state & IVR_STATUS) &&
charger->cable_type != SEC_BATTERY_CABLE_NONE) {
if (s2mu106_read_reg(charger->i2c, S2MU106_CHG_STATUS5, &ivr_state)) {
pr_err("%s: Error reading S2MU106_CHG_STATUS5\n", __func__);
break;
}
pr_info("%s: ivr_status 0x13:0x%02x\n", __func__, ivr_state);
if (++ivr_cnt >= 2) {
reduce_input_current(charger);
ivr_cnt = 0;
}
msleep(50);
if (!(ivr_state & IVR_STATUS)) {
pr_info("%s: EXIT IVR WORK: check value (0x13:0x%02x, input current:%d)\n", __func__,
ivr_state, charger->input_current);
break;
}
if (s2mu106_get_input_current_limit(charger) <= MINIMUM_INPUT_CURRENT)
break;
}
if (charger->ivr_on) {
union power_supply_propval value;
if (is_not_wireless_type(charger->cable_type))
s2mu106_check_slow_charging(charger, charger->input_current);
if ((charger->irq_ivr_enabled == 1) &&
(charger->input_current <= MINIMUM_INPUT_CURRENT) &&
(charger->slow_charging)) {
/* Disable IVR IRQ, can't reduce current any more */
u8 reg_data;
charger->irq_ivr_enabled = 0;
disable_irq_nosync(charger->irq_ivr);
/* Mask IRQ */
s2mu106_update_reg(charger->i2c,
S2MU106_CHG_INT2M, 1 << IVR_M_SHIFT, IVR_M_MASK);
s2mu106_read_reg(charger->i2c, S2MU106_CHG_INT2M, &reg_data);
pr_info("%s : disable ivr : 0x%x\n", __func__, reg_data);
}
value.intval = s2mu106_get_input_current_limit(charger);
psy_do_property("battery", set,
POWER_SUPPLY_EXT_PROP_AICL_CURRENT, value);
}
if (charger->irq_ivr_enabled == 1) {
/* Unmask IRQ */
s2mu106_update_reg(charger->i2c, S2MU106_CHG_INT2M,
0 << IVR_M_SHIFT, IVR_M_MASK);
}
mutex_unlock(&charger->charger_mutex);
wake_unlock(&charger->ivr_wake_lock);
}
static void s2mu106_wc_current_work(struct work_struct *work)
{
struct s2mu106_charger_data *charger =
container_of(work, struct s2mu106_charger_data, wc_current_work.work);
union power_supply_propval value;
int diff_current = 0;
if (is_not_wireless_type(charger->cable_type)) {
charger->wc_pre_current = WC_CURRENT_START;
s2mu106_set_wcin_input_current(charger, 500);
wake_unlock(&charger->wc_current_wake_lock);
return;
}
if (charger->wc_pre_current == charger->wc_current) {
s2mu106_set_fast_charging_current(charger, charger->charging_current);
/* Wcurr-B) Restore Vrect adj room to previous value
* after finishing wireless input current setting.
* Refer to Wcurr-A) step
*/
msleep(500);
if (is_nv_wireless_type(charger->cable_type)) {
psy_do_property("battery", get,
POWER_SUPPLY_PROP_CAPACITY, value);
if (value.intval < charger->pdata->wireless_cc_cv)
value.intval = WIRELESS_VRECT_ADJ_ROOM_4; /* WPC 4.5W, Vrect Room 30mV */
else
value.intval = WIRELESS_VRECT_ADJ_ROOM_5; /* WPC 4.5W, Vrect Room 80mV */
} else if (is_hv_wireless_type(charger->cable_type)) {
value.intval = WIRELESS_VRECT_ADJ_ROOM_5; /* WPC 9W, Vrect Room 80mV */
} else {
value.intval = WIRELESS_VRECT_ADJ_OFF; /* PMA 4.5W, Vrect Room 0mV */
}
psy_do_property(charger->pdata->wireless_charger_name, set,
POWER_SUPPLY_PROP_INPUT_VOLTAGE_REGULATION, value);
#if defined(CONFIG_WIRELESS_CHARGER_MFC_S2MIW04)
value.intval = charger->wc_current;
psy_do_property(charger->pdata->wireless_charger_name, set,
POWER_SUPPLY_PROP_CURRENT_MAX, value);
#endif
wake_unlock(&charger->wc_current_wake_lock);
} else {
diff_current = charger->wc_pre_current - charger->wc_current;
diff_current = (diff_current > WC_CURRENT_STEP) ? WC_CURRENT_STEP :
((diff_current < -WC_CURRENT_STEP) ? -WC_CURRENT_STEP : diff_current);
charger->wc_pre_current -= diff_current;
s2mu106_set_wcin_input_current(charger, charger->wc_pre_current);
queue_delayed_work(charger->charger_wqueue, &charger->wc_current_work,
msecs_to_jiffies(WC_CURRENT_WORK_STEP));
}
pr_info("%s: wc_current(%d), wc_pre_current(%d), diff(%d)\n", __func__,
charger->wc_current, charger->wc_pre_current, diff_current);
}
static void s2mu106_pmeter_3lv_check_work(struct work_struct *work)
{
struct s2mu106_charger_data *charger = container_of(work,
struct s2mu106_charger_data, pmeter_3lv_work.work);
union power_supply_propval value;
int voltage;
psy_do_property("s2mu106_pmeter", get,
POWER_SUPPLY_PROP_VCHGIN, value);
voltage = value.intval;
if (voltage <= 6000) {
s2mu106_update_reg(charger->i2c, 0xAD, 0x0F, 0x1F);
pr_info("%s : AFC or PD TA boosting fail!\n", __func__);
}
}
static void s2mu106_pmeter_2lv_check_work(struct work_struct *work)
{
struct s2mu106_charger_data *charger = container_of(work,
struct s2mu106_charger_data, pmeter_2lv_work.work);
union power_supply_propval value;
int voltage;
psy_do_property("s2mu106_pmeter", get,
POWER_SUPPLY_PROP_VCHGIN, value);
voltage = value.intval;
if (voltage >= 6900) {
s2mu106_update_reg(charger->i2c, 0xAD, 0x04, 0x1F);
pr_info("%s : AFC or PD TA 5V or detach fail!\n", __func__);
}
}
static irqreturn_t s2mu106_ivr_isr(int irq, void *data)
{
struct s2mu106_charger_data *charger = data;
pr_info("%s: irq(%d)\n", __func__, irq);
wake_lock(&charger->ivr_wake_lock);
/* Mask IRQ */
s2mu106_update_reg(charger->i2c,
S2MU106_CHG_INT2M, 1 << IVR_M_SHIFT, IVR_M_MASK);
queue_delayed_work(charger->charger_wqueue, &charger->ivr_work,
msecs_to_jiffies(IVR_WORK_DELAY));
wake_unlock(&charger->wc_current_wake_lock);
cancel_delayed_work(&charger->wc_current_work);
return IRQ_HANDLED;
}
static int s2mu106_charger_parse_dt(struct device *dev,
struct s2mu106_charger_platform_data *pdata)
{
struct device_node *np = of_find_node_by_name(NULL, "s2mu106-charger");
int ret = 0;
if (!np) {
pr_err("%s np NULL(s2mu106-charger)\n", __func__);
} else {
ret = of_property_read_u32(np, "battery,chg_switching_freq",
&pdata->chg_switching_freq);
if (ret < 0)
pr_info("%s: Charger switching FRQ is Empty\n", __func__);
ret = of_property_read_u32(np, "charger,slow_charging_current",
&pdata->slow_charging_current);
if (ret) {
pr_info("%s : slow_charging_current is Empty\n", __func__);
pdata->slow_charging_current = SLOW_CHARGING_CURRENT_STANDARD;
} else {
pr_info("%s : slow_charging_current is %d\n", __func__, pdata->slow_charging_current);
}
ret = of_property_read_u32(np, "charger,mrstbtmr_factory",
&pdata->mrstbtmr_factory);
if (ret) {
pr_info("%s: charger,mrstbtmr_factory is Empty, set to default 1 second\n",
__func__);
pdata->mrstbtmr_factory = 1;
}
pr_info("%s: charger,mrstbtmr_factory is %d\n",
__func__, pdata->mrstbtmr_factory);
pdata->always_vssh_ldo_en = of_property_read_bool(np,
"charger,always_vssh_ldo_en");
pr_info("%s: charger,always_vssh_ldo_en is %d\n",
__func__, pdata->always_vssh_ldo_en);
pdata->block_otg_psk_mode_en = of_property_read_bool(np,
"charger,block_otg_psk_mode_en");
pr_info("%s: charger,block_otg_psk_mode_en is %d\n",
__func__, pdata->block_otg_psk_mode_en);
pdata->reduce_async_debounce_time = of_property_read_bool(np,
"charger,reduce_async_debounce_time");
pr_info("%s: charger,reduce_async_debounce_time is %d\n",
__func__, pdata->reduce_async_debounce_time);
}
np = of_find_node_by_name(NULL, "battery");
if (!np) {
pr_err("%s np NULL\n", __func__);
} else {
ret = of_property_read_string(np,
"battery,fuelgauge_name",
(char const **)&pdata->fuelgauge_name);
if (ret < 0)
pr_info("%s: Fuel-gauge name is Empty\n", __func__);
ret = of_property_read_string(np, "battery,wireless_charger_name",
(char const **)&pdata->wireless_charger_name);
if (ret)
pr_info("%s: Wireless charger name is Empty\n", __func__);
ret = of_property_read_u32(np, "battery,chg_float_voltage",
&pdata->chg_float_voltage);
if (ret) {
pr_info("%s: battery,chg_float_voltage is Empty\n", __func__);
pdata->chg_float_voltage = 4200;
}
pr_info("%s: battery,chg_float_voltage is %d\n",
__func__, pdata->chg_float_voltage);
pdata->chg_eoc_dualpath = of_property_read_bool(np,
"battery,chg_eoc_dualpath");
ret = of_property_read_u32(np, "battery,wireless_cc_cv",
&pdata->wireless_cc_cv);
if (ret)
pr_info("%s : wireless_cc_cv is Empty\n", __func__);
pdata->chg_ocp_disable = of_property_read_bool(np,
"battery,chg_ocp_disable");
}
np = of_find_node_by_name(NULL, "sec-direct-charger");
if (!np) {
pr_err("%s np NULL(sec-multi-charger)\n", __func__);
} else {
ret = of_property_read_string(np,
"charger,main_charger",
(char const **)&pdata->charger_name);
if (ret < 0)
pr_info("%s: Charger name is Empty\n", __func__);
}
#if 0
p = of_get_property(np, "battery,input_current_limit", &len);
if (!p)
return 1;
len = len / sizeof(u32);
pdata->charging_current =
kzalloc(sizeof(sec_charging_current_t) * len,
GFP_KERNEL);
for (i = 0; i < len; i++) {
ret = of_property_read_u32_index(np,
"battery,input_current_limit", i,
&pdata->charging_current[i].input_current_limit);
if (ret)
pr_info("%s : Input_current_limit is Empty\n",
__func__);
ret = of_property_read_u32_index(np,
"battery,fast_charging_current", i,
&pdata->charging_current[i].fast_charging_current);
if (ret)
pr_info("%s : Fast charging current is Empty\n",
__func__);
ret = of_property_read_u32_index(np,
"battery,full_check_current", i,
&pdata->charging_current[i].full_check_current);
if (ret)
pr_info("%s : Full check current is Empty\n",
__func__);
}
}
#endif
pr_info("%s DT file parsed successfully, %d\n", __func__, ret);
return 0;
}
ssize_t s2mu106_show_attrs(struct device *dev,
struct device_attribute *attr, char *buf);
ssize_t s2mu106_store_attrs(struct device *dev,
struct device_attribute *attr,
const char *buf, size_t count);
#define S2MU106_ATTR(_name) \
{ \
.attr = {.name = #_name, .mode = 0664}, \
.show = s2mu106_show_attrs, \
.store = s2mu106_store_attrs, \
}
enum {
CHIP_ID = 0,
DATA,
DATA_1
};
static struct device_attribute s2mu106_attrs[] = {
S2MU106_ATTR(chip_id),
S2MU106_ATTR(data),
S2MU106_ATTR(data_1),
};
static int s2mu106_create_attrs(struct device *dev)
{
int i, rc;
for (i = 0; i < (int)ARRAY_SIZE(s2mu106_attrs); i++) {
rc = device_create_file(dev, &s2mu106_attrs[i]);
if (rc)
goto create_attrs_failed;
}
return rc;
create_attrs_failed:
dev_err(dev, "%s: failed (%d)\n", __func__, rc);
while (i--)
device_remove_file(dev, &s2mu106_attrs[i]);
return rc;
}
ssize_t s2mu106_show_attrs(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct power_supply *psy = dev_get_drvdata(dev);
struct s2mu106_charger_data *charger = power_supply_get_drvdata(psy);
const ptrdiff_t offset = attr - s2mu106_attrs;
int i = 0;
u8 addr, data;
switch (offset) {
case CHIP_ID:
i += scnprintf(buf + i, PAGE_SIZE - i, "%x\n", charger->dev_id);
break;
case DATA:
for (addr = 0x07; addr <= 0x33; addr++) {
s2mu106_read_reg(charger->i2c, addr, &data);
i += scnprintf(buf + i, PAGE_SIZE - i,
"0x%02x : 0x%02x\n", addr, data);
}
s2mu106_read_reg(charger->i2c, 0x3A, &data);
i += scnprintf(buf + i, PAGE_SIZE - i,
"0x%02x : 0x%02x\n", 0x3A, data);
s2mu106_read_reg(charger->i2c, S2MU106_REG_PMICID, &data);
i += scnprintf(buf + i, PAGE_SIZE - i,
"0x%02x : 0x%02x\n", S2MU106_REG_PMICID, data);
break;
case DATA_1:
s2mu106_read_reg(charger->i2c, charger->read_reg, &data);
i += scnprintf(buf + i, PAGE_SIZE - i,
"0x%02x : 0x%02x\n", charger->read_reg, data);
break;
default:
return -EINVAL;
}
return i;
}
ssize_t s2mu106_store_attrs(struct device *dev,
struct device_attribute *attr,
const char *buf, size_t count)
{
struct power_supply *psy = dev_get_drvdata(dev);
struct s2mu106_charger_data *charger = power_supply_get_drvdata(psy);
const ptrdiff_t offset = attr - s2mu106_attrs;
int ret = 0;
int x, y;
switch (offset) {
case CHIP_ID:
ret = count;
break;
case DATA:
if (sscanf(buf, "0x%8x 0x%8x", &x, &y) == 2) {
if (x >= 0x00 && x <= 0xFF) {
u8 addr = x;
u8 data = y;
if (s2mu106_write_reg(charger->i2c, addr, data) < 0) {
dev_info(charger->dev,
"%s: addr: 0x%x write fail\n", __func__, addr);
}
} else {
dev_info(charger->dev,
"%s: addr: 0x%x is wrong\n", __func__, x);
}
}
ret = count;
break;
case DATA_1:
if (sscanf(buf, "0x%8x", &x) == 1)
charger->read_reg = x;
ret = count;
break;
default:
ret = -EINVAL;
}
return ret;
}
/* if need to set s2mu106 pdata */
static const struct of_device_id s2mu106_charger_match_table[] = {
{ .compatible = "samsung,s2mu106-charger",},
{},
};
static int s2mu106_charger_probe(struct platform_device *pdev)
{
struct s2mu106_dev *s2mu106 = dev_get_drvdata(pdev->dev.parent);
struct s2mu106_platform_data *pdata = dev_get_platdata(s2mu106->dev);
struct s2mu106_charger_data *charger;
struct power_supply_config psy_cfg = {};
int ret = 0;
pr_info("%s:[BATT] S2MU106 Charger driver probe\n", __func__);
charger = kzalloc(sizeof(*charger), GFP_KERNEL);
if (!charger)
return -ENOMEM;
charger->dev_id = s2mu106->pmic_ver;
mutex_init(&charger->charger_mutex);
mutex_init(&charger->regmode_mutex);
charger->otg_on = false;
charger->ivr_on = false;
charger->slow_charging = false;
charger->dev = &pdev->dev;
charger->i2c = s2mu106->i2c;
charger->pdata = devm_kzalloc(&pdev->dev, sizeof(*(charger->pdata)),
GFP_KERNEL);
if (!charger->pdata) {
ret = -ENOMEM;
goto err_parse_dt_nomem;
}
ret = s2mu106_charger_parse_dt(&pdev->dev, charger->pdata);
if (ret < 0)
goto err_parse_dt;
platform_set_drvdata(pdev, charger);
if (charger->pdata->charger_name == NULL)
charger->pdata->charger_name = "s2mu106-charger";
if (charger->pdata->fuelgauge_name == NULL)
charger->pdata->fuelgauge_name = "s2mu106-fuelgauge";
charger->psy_chg_desc.name = charger->pdata->charger_name;
charger->psy_chg_desc.type = POWER_SUPPLY_TYPE_UNKNOWN;
charger->psy_chg_desc.get_property = s2mu106_chg_get_property;
charger->psy_chg_desc.set_property = s2mu106_chg_set_property;
charger->psy_chg_desc.properties = s2mu106_charger_props;
charger->psy_chg_desc.num_properties = ARRAY_SIZE(s2mu106_charger_props);
charger->psy_otg_desc.name = "otg";
charger->psy_otg_desc.type = POWER_SUPPLY_TYPE_OTG;
charger->psy_otg_desc.get_property = s2mu106_otg_get_property;
charger->psy_otg_desc.set_property = s2mu106_otg_set_property;
charger->psy_otg_desc.properties = s2mu106_otg_props;
charger->psy_otg_desc.num_properties = ARRAY_SIZE(s2mu106_otg_props);
s2mu106_chg_init(charger);
charger->input_current = s2mu106_get_input_current_limit(charger);
charger->charging_current = s2mu106_get_fast_charging_current(charger);
charger->cable_type = SEC_BATTERY_CABLE_NONE;
psy_cfg.drv_data = charger;
psy_cfg.supplied_to = s2mu106_supplied_to;
psy_cfg.num_supplicants = ARRAY_SIZE(s2mu106_supplied_to);
charger->psy_chg = power_supply_register(&pdev->dev, &charger->psy_chg_desc, &psy_cfg);
if (IS_ERR(charger->psy_chg)) {
pr_err("%s: Failed to Register psy_chg\n", __func__);
ret = PTR_ERR(charger->psy_chg);
goto err_power_supply_register;
}
charger->psy_otg = power_supply_register(&pdev->dev, &charger->psy_otg_desc, &psy_cfg);
if (IS_ERR(charger->psy_otg)) {
pr_err("%s: Failed to Register psy_otg\n", __func__);
ret = PTR_ERR(charger->psy_otg);
goto err_power_supply_register_otg;
}
charger->charger_wqueue = create_singlethread_workqueue("charger-wq");
if (!charger->charger_wqueue) {
pr_info("%s: failed to create wq.\n", __func__);
ret = -ESRCH;
goto err_create_wq;
}
wake_lock_init(&charger->ivr_wake_lock, WAKE_LOCK_SUSPEND,
"charger-ivr");
wake_lock_init(&charger->wc_current_wake_lock,
WAKE_LOCK_SUSPEND, "charger->wc-current");
INIT_DELAYED_WORK(&charger->otg_vbus_work, s2mu106_charger_otg_vbus_work);
INIT_DELAYED_WORK(&charger->ivr_work, s2mu106_ivr_irq_work);
INIT_DELAYED_WORK(&charger->wc_current_work, s2mu106_wc_current_work);
INIT_DELAYED_WORK(&charger->pmeter_3lv_work, s2mu106_pmeter_3lv_check_work);
INIT_DELAYED_WORK(&charger->pmeter_2lv_work, s2mu106_pmeter_2lv_check_work);
/*
* irq request
* if you need to add irq , please refer below code.
*/
charger->irq_sys = pdata->irq_base + S2MU106_CHG1_IRQ_SYS;
ret = request_threaded_irq(charger->irq_sys, NULL,
s2mu106_ovp_isr, 0, "sys-irq", charger);
if (ret < 0) {
dev_err(s2mu106->dev, "%s: Fail to request SYS in IRQ: %d: %d\n",
__func__, charger->irq_sys, ret);
goto err_reg_irq;
}
#if EN_BAT_DET_IRQ
charger->irq_det_bat = pdata->irq_base + S2MU106_CHG2_IRQ_DET_BAT;
ret = request_threaded_irq(charger->irq_det_bat, NULL,
s2mu106_det_bat_isr, 0, "det_bat-irq", charger);
if (ret < 0) {
dev_err(s2mu106->dev, "%s: Fail to request DET_BAT in IRQ: %d: %d\n",
__func__, charger->irq_det_bat, ret);
goto err_reg_irq;
}
#endif
#if EN_CHG1_IRQ_CHGIN
charger->irq_chgin = pdata->irq_base + S2MU106_CHG1_IRQ_CHGIN;
ret = request_threaded_irq(charger->irq_chgin, NULL,
s2mu106_chg_isr, 0, "chgin-irq", charger);
if (ret < 0) {
dev_err(s2mu106->dev, "%s: Fail to request CHGIN in IRQ: %d: %d\n",
__func__, charger->irq_chgin, ret);
goto err_reg_irq;
}
#endif
charger->irq_rst = pdata->irq_base + S2MU106_CHG1_IRQ_CHG_RSTART;
ret = request_threaded_irq(charger->irq_rst, NULL,
s2mu106_chg_isr, 0, "restart-irq", charger);
if (ret < 0) {
dev_err(s2mu106->dev, "%s: Fail to request CHG_Restart in IRQ: %d: %d\n",
__func__, charger->irq_rst, ret);
goto err_reg_irq;
}
charger->irq_done = pdata->irq_base + S2MU106_CHG1_IRQ_DONE;
ret = request_threaded_irq(charger->irq_done, NULL,
s2mu106_done_isr, 0, "done-irq", charger);
if (ret < 0) {
dev_err(s2mu106->dev, "%s: Fail to request DONE in IRQ: %d: %d\n",
__func__, charger->irq_done, ret);
goto err_reg_irq;
}
charger->irq_chg_fault = pdata->irq_base + S2MU106_CHG1_IRQ_CHG_Fault;
ret = request_threaded_irq(charger->irq_chg_fault, NULL,
s2mu106_event_isr, 0, "chg_fault-irq", charger);
if (ret < 0) {
dev_err(s2mu106->dev, "%s: Fail to request CHG_Fault in IRQ: %d: %d\n",
__func__, charger->irq_chg_fault, ret);
goto err_reg_irq;
}
#if defined(CONFIG_WIRELESS_TX_MODE)
charger->irq_tx = pdata->irq_base + S2MU106_CHG3_IRQ_TX;
ret = request_threaded_irq(charger->irq_tx, NULL,
s2mu106_tx_isr, 0, "tx-irq", charger);
if (ret < 0) {
dev_err(s2mu106->dev, "%s: Fail to request TX in IRQ: %d: %d\n",
__func__, charger->irq_tx, ret);
goto err_reg_irq;
}
#endif
charger->irq_otg = pdata->irq_base + S2MU106_CHG3_IRQ_OTG;
ret = request_threaded_irq(charger->irq_otg, NULL,
s2mu106_otg_isr, 0, "otg-irq", charger);
if (ret < 0) {
dev_err(s2mu106->dev, "%s: Fail to request OTG in IRQ: %d: %d\n",
__func__, charger->irq_otg, ret);
goto err_reg_irq;
}
charger->irq_bat = pdata->irq_base + S2MU106_CHG2_IRQ_BAT;
ret = request_threaded_irq(charger->irq_bat, NULL,
s2mu106_bat_isr, 0, "bat-irq", charger);
if (ret < 0) {
dev_err(s2mu106->dev, "%s: Fail to request BAT in IRQ: %d: %d\n",
__func__, charger->irq_bat, ret);
goto err_reg_irq;
}
charger->irq_ivr = pdata->irq_base + S2MU106_CHG2_IRQ_IVR;
charger->irq_ivr_enabled = 1;
ret = request_threaded_irq(charger->irq_ivr, NULL,
s2mu106_ivr_isr, 0, "ivr-irq", charger);
if (ret < 0) {
pr_err("%s: Fail to request IVR_INT IRQ: %d: %d\n",
__func__, charger->irq_ivr, ret);
charger->irq_ivr_enabled = -1;
goto err_reg_irq;
}
/* Do max charging by freq. change, when duty is max */
s2mu106_update_reg(charger->i2c, 0x7A, 0x1 << 4, 0x1 << 4);
#if EN_TEST_READ
s2mu106_test_read(charger->i2c);
#endif
ret = s2mu106_create_attrs(&charger->psy_chg->dev);
if (ret) {
dev_err(s2mu106->dev,
"%s : Failed to create_attrs\n", __func__);
}
pr_info("%s:[BATT] S2MU106 charger driver loaded OK\n", __func__);
return 0;
err_reg_irq:
destroy_workqueue(charger->charger_wqueue);
err_create_wq:
power_supply_unregister(charger->psy_otg);
err_power_supply_register_otg:
power_supply_unregister(charger->psy_chg);
err_power_supply_register:
err_parse_dt:
err_parse_dt_nomem:
mutex_destroy(&charger->charger_mutex);
mutex_destroy(&charger->regmode_mutex);
kfree(charger);
return ret;
}
static int s2mu106_charger_remove(struct platform_device *pdev)
{
struct s2mu106_charger_data *charger =
platform_get_drvdata(pdev);
power_supply_unregister(charger->psy_chg);
mutex_destroy(&charger->charger_mutex);
mutex_destroy(&charger->regmode_mutex);
kfree(charger);
return 0;
}
#if defined CONFIG_PM
static int s2mu106_charger_suspend(struct device *dev)
{
return 0;
}
static int s2mu106_charger_resume(struct device *dev)
{
return 0;
}
#else
#define s2mu106_charger_suspend NULL
#define s2mu106_charger_resume NULL
#endif
static void s2mu106_charger_shutdown(struct platform_device *pdev)
{
/*
* 1) charger will reset because RST_SW_CHG(CHG VIO Reset On) in normal case.
* it is reset after 750ms when vio is reset.
* 2) if-pmic will reset because manual reset in factory mode, bypass mode.
* it never operate because of bypass mode.
*/
#if !defined(CONFIG_SEC_FACTORY)
struct s2mu106_charger_data *charger = platform_get_drvdata(pdev);
u8 reg_data = 0;
s2mu106_read_reg(charger->i2c, S2MU106_CHG_CTRL0, &reg_data); /* check bypass mode */
if (!factory_mode && !(reg_data & 0x30)) {
s2mu106_write_reg(charger->i2c, S2MU106_CHG_CTRL0, BUCK_MODE);
s2mu106_write_reg(charger->i2c, S2MU106_CHG_CTRL1, 0x12);
s2mu106_write_reg(charger->i2c, S2MU106_CHG_CTRL2, 0x12);
s2mu106_write_reg(charger->i2c, S2MU106_CHG_CTRL3, 0x10);
s2mu106_write_reg(charger->i2c, S2MU106_CHG_CTRL5, 0x3C);
s2mu106_write_reg(charger->i2c, S2MU106_CHG_CTRL11, 0x16);
}
#endif
pr_info("%s: S2MU106 Charger driver shutdown\n", __func__);
}
static SIMPLE_DEV_PM_OPS(s2mu106_charger_pm_ops, s2mu106_charger_suspend,
s2mu106_charger_resume);
static struct platform_driver s2mu106_charger_driver = {
.driver = {
.name = "s2mu106-charger",
.owner = THIS_MODULE,
.of_match_table = s2mu106_charger_match_table,
.pm = &s2mu106_charger_pm_ops,
},
.probe = s2mu106_charger_probe,
.remove = s2mu106_charger_remove,
.shutdown = s2mu106_charger_shutdown,
};
static int __init s2mu106_charger_init(void)
{
pr_info("%s start\n", __func__);
return platform_driver_register(&s2mu106_charger_driver);
}
module_init(s2mu106_charger_init);
static void __exit s2mu106_charger_exit(void)
{
platform_driver_unregister(&s2mu106_charger_driver);
}
module_exit(s2mu106_charger_exit);
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Samsung Electronics");
MODULE_DESCRIPTION("Charger driver for S2MU106");