| /* |
| * Copyright 2011 Tilera Corporation. All Rights Reserved. |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License |
| * as published by the Free Software Foundation, version 2. |
| * |
| * This program is distributed in the hope that it will be useful, but |
| * WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or |
| * NON INFRINGEMENT. See the GNU General Public License for |
| * more details. |
| * |
| * TILE startup code. |
| */ |
| |
| #include <linux/linkage.h> |
| #include <linux/init.h> |
| #include <asm/page.h> |
| #include <asm/pgtable.h> |
| #include <asm/thread_info.h> |
| #include <asm/processor.h> |
| #include <asm/asm-offsets.h> |
| #include <hv/hypervisor.h> |
| #include <arch/chip.h> |
| #include <arch/spr_def.h> |
| |
| /* |
| * This module contains the entry code for kernel images. It performs the |
| * minimal setup needed to call the generic C routines. |
| */ |
| |
| __HEAD |
| ENTRY(_start) |
| /* Notify the hypervisor of what version of the API we want */ |
| { |
| #if KERNEL_PL == 1 && _HV_VERSION == 13 |
| /* Support older hypervisors by asking for API version 12. */ |
| movei r0, _HV_VERSION_OLD_HV_INIT |
| #else |
| movei r0, _HV_VERSION |
| #endif |
| movei r1, TILE_CHIP |
| } |
| { |
| movei r2, TILE_CHIP_REV |
| movei r3, KERNEL_PL |
| } |
| jal hv_init |
| /* Get a reasonable default ASID in r0 */ |
| { |
| move r0, zero |
| jal hv_inquire_asid |
| } |
| |
| /* |
| * Install the default page table. The relocation required to |
| * statically define the table is a bit too complex, so we have |
| * to plug in the pointer from the L0 to the L1 table by hand. |
| * We only do this on the first cpu to boot, though, since the |
| * other CPUs should see a properly-constructed page table. |
| */ |
| { |
| v4int_l r2, zero, r0 /* ASID for hv_install_context */ |
| moveli r4, hw1_last(swapper_pgprot - PAGE_OFFSET) |
| } |
| { |
| shl16insli r4, r4, hw0(swapper_pgprot - PAGE_OFFSET) |
| } |
| { |
| ld r1, r4 /* access_pte for hv_install_context */ |
| } |
| { |
| moveli r0, hw1_last(.Lsv_data_pmd - PAGE_OFFSET) |
| moveli r6, hw1_last(temp_data_pmd - PAGE_OFFSET) |
| } |
| { |
| /* After initializing swapper_pgprot, HV_PTE_GLOBAL is set. */ |
| bfextu r7, r1, HV_PTE_INDEX_GLOBAL, HV_PTE_INDEX_GLOBAL |
| inv r4 |
| } |
| bnez r7, .Lno_write |
| { |
| shl16insli r0, r0, hw0(.Lsv_data_pmd - PAGE_OFFSET) |
| shl16insli r6, r6, hw0(temp_data_pmd - PAGE_OFFSET) |
| } |
| { |
| /* Cut off the low bits of the PT address. */ |
| shrui r6, r6, HV_LOG2_PAGE_TABLE_ALIGN |
| /* Start with our access pte. */ |
| move r5, r1 |
| } |
| { |
| /* Stuff the address into the page table pointer slot of the PTE. */ |
| bfins r5, r6, HV_PTE_INDEX_PTFN, \ |
| HV_PTE_INDEX_PTFN + HV_PTE_PTFN_BITS - 1 |
| } |
| { |
| /* Store the L0 data PTE. */ |
| st r0, r5 |
| addli r6, r6, (temp_code_pmd - temp_data_pmd) >> \ |
| HV_LOG2_PAGE_TABLE_ALIGN |
| } |
| { |
| addli r0, r0, .Lsv_code_pmd - .Lsv_data_pmd |
| bfins r5, r6, HV_PTE_INDEX_PTFN, \ |
| HV_PTE_INDEX_PTFN + HV_PTE_PTFN_BITS - 1 |
| } |
| /* Store the L0 code PTE. */ |
| st r0, r5 |
| |
| .Lno_write: |
| moveli lr, hw2_last(1f) |
| { |
| shl16insli lr, lr, hw1(1f) |
| moveli r0, hw1_last(swapper_pg_dir - PAGE_OFFSET) |
| } |
| { |
| shl16insli lr, lr, hw0(1f) |
| shl16insli r0, r0, hw0(swapper_pg_dir - PAGE_OFFSET) |
| } |
| { |
| moveli r3, CTX_PAGE_FLAG |
| j hv_install_context |
| } |
| 1: |
| |
| /* Install the interrupt base. */ |
| moveli r0, hw2_last(MEM_SV_START) |
| shl16insli r0, r0, hw1(MEM_SV_START) |
| shl16insli r0, r0, hw0(MEM_SV_START) |
| mtspr SPR_INTERRUPT_VECTOR_BASE_K, r0 |
| |
| /* |
| * Get our processor number and save it away in SAVE_K_0. |
| * Extract stuff from the topology structure: r4 = y, r6 = x, |
| * r5 = width. FIXME: consider whether we want to just make these |
| * 64-bit values (and if so fix smp_topology write below, too). |
| */ |
| jal hv_inquire_topology |
| { |
| v4int_l r5, zero, r1 /* r5 = width */ |
| shrui r4, r0, 32 /* r4 = y */ |
| } |
| { |
| v4int_l r6, zero, r0 /* r6 = x */ |
| mul_lu_lu r4, r4, r5 |
| } |
| { |
| add r4, r4, r6 /* r4 == cpu == y*width + x */ |
| } |
| |
| #ifdef CONFIG_SMP |
| /* |
| * Load up our per-cpu offset. When the first (master) tile |
| * boots, this value is still zero, so we will load boot_pc |
| * with start_kernel, and boot_sp with init_stack + THREAD_SIZE. |
| * The master tile initializes the per-cpu offset array, so that |
| * when subsequent (secondary) tiles boot, they will instead load |
| * from their per-cpu versions of boot_sp and boot_pc. |
| */ |
| moveli r5, hw2_last(__per_cpu_offset) |
| shl16insli r5, r5, hw1(__per_cpu_offset) |
| shl16insli r5, r5, hw0(__per_cpu_offset) |
| shl3add r5, r4, r5 |
| ld r5, r5 |
| bnez r5, 1f |
| |
| /* |
| * Save the width and height to the smp_topology variable |
| * for later use. |
| */ |
| moveli r0, hw2_last(smp_topology + HV_TOPOLOGY_WIDTH_OFFSET) |
| shl16insli r0, r0, hw1(smp_topology + HV_TOPOLOGY_WIDTH_OFFSET) |
| shl16insli r0, r0, hw0(smp_topology + HV_TOPOLOGY_WIDTH_OFFSET) |
| st r0, r1 |
| 1: |
| #else |
| move r5, zero |
| #endif |
| |
| /* Load and go with the correct pc and sp. */ |
| { |
| moveli r1, hw2_last(boot_sp) |
| moveli r0, hw2_last(boot_pc) |
| } |
| { |
| shl16insli r1, r1, hw1(boot_sp) |
| shl16insli r0, r0, hw1(boot_pc) |
| } |
| { |
| shl16insli r1, r1, hw0(boot_sp) |
| shl16insli r0, r0, hw0(boot_pc) |
| } |
| { |
| add r1, r1, r5 |
| add r0, r0, r5 |
| } |
| ld r0, r0 |
| ld sp, r1 |
| or r4, sp, r4 |
| mtspr SPR_SYSTEM_SAVE_K_0, r4 /* save ksp0 + cpu */ |
| addi sp, sp, -STACK_TOP_DELTA |
| { |
| move lr, zero /* stop backtraces in the called function */ |
| jr r0 |
| } |
| ENDPROC(_start) |
| |
| __PAGE_ALIGNED_BSS |
| .align PAGE_SIZE |
| ENTRY(empty_zero_page) |
| .fill PAGE_SIZE,1,0 |
| END(empty_zero_page) |
| |
| .macro PTE cpa, bits1 |
| .quad HV_PTE_PAGE | HV_PTE_DIRTY | HV_PTE_PRESENT | HV_PTE_ACCESSED |\ |
| HV_PTE_GLOBAL | (HV_PTE_MODE_CACHE_NO_L3 << HV_PTE_INDEX_MODE) |\ |
| (\bits1) | (HV_CPA_TO_PTFN(\cpa) << HV_PTE_INDEX_PTFN) |
| .endm |
| |
| __PAGE_ALIGNED_DATA |
| .align PAGE_SIZE |
| ENTRY(swapper_pg_dir) |
| .org swapper_pg_dir + PGD_INDEX(PAGE_OFFSET) * HV_PTE_SIZE |
| .Lsv_data_pmd: |
| .quad 0 /* PTE temp_data_pmd - PAGE_OFFSET, 0 */ |
| .org swapper_pg_dir + PGD_INDEX(MEM_SV_START) * HV_PTE_SIZE |
| .Lsv_code_pmd: |
| .quad 0 /* PTE temp_code_pmd - PAGE_OFFSET, 0 */ |
| .org swapper_pg_dir + SIZEOF_PGD |
| END(swapper_pg_dir) |
| |
| .align HV_PAGE_TABLE_ALIGN |
| ENTRY(temp_data_pmd) |
| /* |
| * We fill the PAGE_OFFSET pmd with huge pages with |
| * VA = PA + PAGE_OFFSET. We remap things with more precise access |
| * permissions later. |
| */ |
| .set addr, 0 |
| .rept PTRS_PER_PMD |
| PTE addr, HV_PTE_READABLE | HV_PTE_WRITABLE |
| .set addr, addr + HPAGE_SIZE |
| .endr |
| .org temp_data_pmd + SIZEOF_PMD |
| END(temp_data_pmd) |
| |
| .align HV_PAGE_TABLE_ALIGN |
| ENTRY(temp_code_pmd) |
| /* |
| * We fill the MEM_SV_START pmd with huge pages with |
| * VA = PA + PAGE_OFFSET. We remap things with more precise access |
| * permissions later. |
| */ |
| .set addr, 0 |
| .rept PTRS_PER_PMD |
| PTE addr, HV_PTE_READABLE | HV_PTE_EXECUTABLE |
| .set addr, addr + HPAGE_SIZE |
| .endr |
| .org temp_code_pmd + SIZEOF_PMD |
| END(temp_code_pmd) |
| |
| /* |
| * Isolate swapper_pgprot to its own cache line, since each cpu |
| * starting up will read it using VA-is-PA and local homing. |
| * This would otherwise likely conflict with other data on the cache |
| * line, once we have set its permanent home in the page tables. |
| */ |
| __INITDATA |
| .align CHIP_L2_LINE_SIZE() |
| ENTRY(swapper_pgprot) |
| .quad HV_PTE_PRESENT | (HV_PTE_MODE_CACHE_NO_L3 << HV_PTE_INDEX_MODE) |
| .align CHIP_L2_LINE_SIZE() |
| END(swapper_pgprot) |