| /* |
| * Copyright (C) 2007-2009 Michal Simek <monstr@monstr.eu> |
| * Copyright (C) 2007-2009 PetaLogix |
| * Copyright (C) 2006 Atmark Techno, Inc. |
| * |
| * MMU code derived from arch/ppc/kernel/head_4xx.S: |
| * Copyright (c) 1995-1996 Gary Thomas <gdt@linuxppc.org> |
| * Initial PowerPC version. |
| * Copyright (c) 1996 Cort Dougan <cort@cs.nmt.edu> |
| * Rewritten for PReP |
| * Copyright (c) 1996 Paul Mackerras <paulus@cs.anu.edu.au> |
| * Low-level exception handers, MMU support, and rewrite. |
| * Copyright (c) 1997 Dan Malek <dmalek@jlc.net> |
| * PowerPC 8xx modifications. |
| * Copyright (c) 1998-1999 TiVo, Inc. |
| * PowerPC 403GCX modifications. |
| * Copyright (c) 1999 Grant Erickson <grant@lcse.umn.edu> |
| * PowerPC 403GCX/405GP modifications. |
| * Copyright 2000 MontaVista Software Inc. |
| * PPC405 modifications |
| * PowerPC 403GCX/405GP modifications. |
| * Author: MontaVista Software, Inc. |
| * frank_rowand@mvista.com or source@mvista.com |
| * debbie_chu@mvista.com |
| * |
| * This file is subject to the terms and conditions of the GNU General Public |
| * License. See the file "COPYING" in the main directory of this archive |
| * for more details. |
| */ |
| |
| #include <linux/linkage.h> |
| #include <asm/thread_info.h> |
| #include <asm/page.h> |
| #include <linux/of_fdt.h> /* for OF_DT_HEADER */ |
| |
| #ifdef CONFIG_MMU |
| #include <asm/setup.h> /* COMMAND_LINE_SIZE */ |
| #include <asm/mmu.h> |
| #include <asm/processor.h> |
| |
| .data |
| .global empty_zero_page |
| .align 12 |
| empty_zero_page: |
| .space 4096 |
| .global swapper_pg_dir |
| swapper_pg_dir: |
| .space 4096 |
| |
| #endif /* CONFIG_MMU */ |
| |
| .text |
| ENTRY(_start) |
| mfs r1, rmsr |
| andi r1, r1, ~2 |
| mts rmsr, r1 |
| /* |
| * Here is checking mechanism which check if Microblaze has msr instructions |
| * We load msr and compare it with previous r1 value - if is the same, |
| * msr instructions works if not - cpu don't have them. |
| */ |
| /* r8=0 - I have msr instr, 1 - I don't have them */ |
| rsubi r0, r0, 1 /* set the carry bit */ |
| msrclr r0, 0x4 /* try to clear it */ |
| /* read the carry bit, r8 will be '0' if msrclr exists */ |
| addik r8, r0, 0 |
| |
| /* r7 may point to an FDT, or there may be one linked in. |
| if it's in r7, we've got to save it away ASAP. |
| We ensure r7 points to a valid FDT, just in case the bootloader |
| is broken or non-existent */ |
| beqi r7, no_fdt_arg /* NULL pointer? don't copy */ |
| lw r11, r0, r7 /* Does r7 point to a */ |
| rsubi r11, r11, OF_DT_HEADER /* valid FDT? */ |
| beqi r11, _prepare_copy_fdt |
| or r7, r0, r0 /* clear R7 when not valid DTB */ |
| bnei r11, no_fdt_arg /* No - get out of here */ |
| _prepare_copy_fdt: |
| or r11, r0, r0 /* incremment */ |
| ori r4, r0, TOPHYS(_fdt_start) |
| ori r3, r0, (0x4000 - 4) |
| _copy_fdt: |
| lw r12, r7, r11 /* r12 = r7 + r11 */ |
| sw r12, r4, r11 /* addr[r4 + r11] = r12 */ |
| addik r11, r11, 4 /* increment counting */ |
| bgtid r3, _copy_fdt /* loop for all entries */ |
| addik r3, r3, -4 /* descrement loop */ |
| no_fdt_arg: |
| |
| #ifdef CONFIG_MMU |
| |
| #ifndef CONFIG_CMDLINE_BOOL |
| /* |
| * handling command line |
| * copy command line to __init_end. There is space for storing command line. |
| */ |
| or r6, r0, r0 /* incremment */ |
| ori r4, r0, __init_end /* load address of command line */ |
| tophys(r4,r4) /* convert to phys address */ |
| ori r3, r0, COMMAND_LINE_SIZE - 1 /* number of loops */ |
| _copy_command_line: |
| lbu r7, r5, r6 /* r7=r5+r6 - r5 contain pointer to command line */ |
| sb r7, r4, r6 /* addr[r4+r6]= r7*/ |
| addik r6, r6, 1 /* increment counting */ |
| bgtid r3, _copy_command_line /* loop for all entries */ |
| addik r3, r3, -1 /* descrement loop */ |
| addik r5, r4, 0 /* add new space for command line */ |
| tovirt(r5,r5) |
| #endif /* CONFIG_CMDLINE_BOOL */ |
| |
| #ifdef NOT_COMPILE |
| /* save bram context */ |
| or r6, r0, r0 /* incremment */ |
| ori r4, r0, TOPHYS(_bram_load_start) /* save bram context */ |
| ori r3, r0, (LMB_SIZE - 4) |
| _copy_bram: |
| lw r7, r0, r6 /* r7 = r0 + r6 */ |
| sw r7, r4, r6 /* addr[r4 + r6] = r7*/ |
| addik r6, r6, 4 /* increment counting */ |
| bgtid r3, _copy_bram /* loop for all entries */ |
| addik r3, r3, -4 /* descrement loop */ |
| #endif |
| /* We have to turn on the MMU right away. */ |
| |
| /* |
| * Set up the initial MMU state so we can do the first level of |
| * kernel initialization. This maps the first 16 MBytes of memory 1:1 |
| * virtual to physical. |
| */ |
| nop |
| addik r3, r0, 63 /* Invalidate all TLB entries */ |
| _invalidate: |
| mts rtlbx, r3 |
| mts rtlbhi, r0 /* flush: ensure V is clear */ |
| bgtid r3, _invalidate /* loop for all entries */ |
| addik r3, r3, -1 |
| /* sync */ |
| |
| /* |
| * We should still be executing code at physical address area |
| * RAM_BASEADDR at this point. However, kernel code is at |
| * a virtual address. So, set up a TLB mapping to cover this once |
| * translation is enabled. |
| */ |
| |
| addik r3,r0, CONFIG_KERNEL_START /* Load the kernel virtual address */ |
| tophys(r4,r3) /* Load the kernel physical address */ |
| |
| mts rpid,r0 /* Load the kernel PID */ |
| nop |
| bri 4 |
| |
| /* |
| * Configure and load two entries into TLB slots 0 and 1. |
| * In case we are pinning TLBs, these are reserved in by the |
| * other TLB functions. If not reserving, then it doesn't |
| * matter where they are loaded. |
| */ |
| andi r4,r4,0xfffffc00 /* Mask off the real page number */ |
| ori r4,r4,(TLB_WR | TLB_EX) /* Set the write and execute bits */ |
| |
| andi r3,r3,0xfffffc00 /* Mask off the effective page number */ |
| ori r3,r3,(TLB_VALID | TLB_PAGESZ(PAGESZ_16M)) |
| |
| mts rtlbx,r0 /* TLB slow 0 */ |
| |
| mts rtlblo,r4 /* Load the data portion of the entry */ |
| mts rtlbhi,r3 /* Load the tag portion of the entry */ |
| |
| addik r4, r4, 0x01000000 /* Map next 16 M entries */ |
| addik r3, r3, 0x01000000 |
| |
| ori r6,r0,1 /* TLB slot 1 */ |
| mts rtlbx,r6 |
| |
| mts rtlblo,r4 /* Load the data portion of the entry */ |
| mts rtlbhi,r3 /* Load the tag portion of the entry */ |
| |
| /* |
| * Load a TLB entry for LMB, since we need access to |
| * the exception vectors, using a 4k real==virtual mapping. |
| */ |
| ori r6,r0,3 /* TLB slot 3 */ |
| mts rtlbx,r6 |
| |
| ori r4,r0,(TLB_WR | TLB_EX) |
| ori r3,r0,(TLB_VALID | TLB_PAGESZ(PAGESZ_4K)) |
| |
| mts rtlblo,r4 /* Load the data portion of the entry */ |
| mts rtlbhi,r3 /* Load the tag portion of the entry */ |
| |
| /* |
| * We now have the lower 16 Meg of RAM mapped into TLB entries, and the |
| * caches ready to work. |
| */ |
| turn_on_mmu: |
| ori r15,r0,start_here |
| ori r4,r0,MSR_KERNEL_VMS |
| mts rmsr,r4 |
| nop |
| rted r15,0 /* enables MMU */ |
| nop |
| |
| start_here: |
| #endif /* CONFIG_MMU */ |
| |
| /* Initialize small data anchors */ |
| la r13, r0, _KERNEL_SDA_BASE_ |
| la r2, r0, _KERNEL_SDA2_BASE_ |
| |
| /* Initialize stack pointer */ |
| la r1, r0, init_thread_union + THREAD_SIZE - 4 |
| |
| /* Initialize r31 with current task address */ |
| la r31, r0, init_task |
| |
| /* |
| * Call platform dependent initialize function. |
| * Please see $(ARCH)/mach-$(SUBARCH)/setup.c for |
| * the function. |
| */ |
| la r9, r0, machine_early_init |
| brald r15, r9 |
| nop |
| |
| #ifndef CONFIG_MMU |
| la r15, r0, machine_halt |
| braid start_kernel |
| nop |
| #else |
| /* |
| * Initialize the MMU. |
| */ |
| bralid r15, mmu_init |
| nop |
| |
| /* Go back to running unmapped so we can load up new values |
| * and change to using our exception vectors. |
| * On the MicroBlaze, all we invalidate the used TLB entries to clear |
| * the old 16M byte TLB mappings. |
| */ |
| ori r15,r0,TOPHYS(kernel_load_context) |
| ori r4,r0,MSR_KERNEL |
| mts rmsr,r4 |
| nop |
| bri 4 |
| rted r15,0 |
| nop |
| |
| /* Load up the kernel context */ |
| kernel_load_context: |
| # Keep entry 0 and 1 valid. Entry 3 mapped to LMB can go away. |
| ori r5,r0,3 |
| mts rtlbx,r5 |
| nop |
| mts rtlbhi,r0 |
| nop |
| addi r15, r0, machine_halt |
| ori r17, r0, start_kernel |
| ori r4, r0, MSR_KERNEL_VMS |
| mts rmsr, r4 |
| nop |
| rted r17, 0 /* enable MMU and jump to start_kernel */ |
| nop |
| #endif /* CONFIG_MMU */ |