| /* |
| * Port for PPC64 David Engebretsen, IBM Corp. |
| * Contains common pci routines for ppc64 platform, pSeries and iSeries brands. |
| * |
| * Copyright (C) 2003 Anton Blanchard <anton@au.ibm.com>, IBM |
| * Rework, based on alpha PCI code. |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License |
| * as published by the Free Software Foundation; either version |
| * 2 of the License, or (at your option) any later version. |
| */ |
| |
| #undef DEBUG |
| |
| #include <linux/kernel.h> |
| #include <linux/pci.h> |
| #include <linux/string.h> |
| #include <linux/init.h> |
| #include <linux/bootmem.h> |
| #include <linux/mm.h> |
| #include <linux/list.h> |
| #include <linux/syscalls.h> |
| #include <linux/irq.h> |
| #include <linux/vmalloc.h> |
| |
| #include <asm/processor.h> |
| #include <asm/io.h> |
| #include <asm/prom.h> |
| #include <asm/pci-bridge.h> |
| #include <asm/byteorder.h> |
| #include <asm/machdep.h> |
| #include <asm/ppc-pci.h> |
| #include <asm/firmware.h> |
| |
| #ifdef DEBUG |
| #include <asm/udbg.h> |
| #define DBG(fmt...) printk(fmt) |
| #else |
| #define DBG(fmt...) |
| #endif |
| |
| unsigned long pci_probe_only = 1; |
| int pci_assign_all_buses = 0; |
| |
| static void fixup_resource(struct resource *res, struct pci_dev *dev); |
| static void do_bus_setup(struct pci_bus *bus); |
| |
| /* pci_io_base -- the base address from which io bars are offsets. |
| * This is the lowest I/O base address (so bar values are always positive), |
| * and it *must* be the start of ISA space if an ISA bus exists because |
| * ISA drivers use hard coded offsets. If no ISA bus exists nothing |
| * is mapped on the first 64K of IO space |
| */ |
| unsigned long pci_io_base = ISA_IO_BASE; |
| EXPORT_SYMBOL(pci_io_base); |
| |
| LIST_HEAD(hose_list); |
| |
| static struct dma_mapping_ops *pci_dma_ops; |
| |
| void set_pci_dma_ops(struct dma_mapping_ops *dma_ops) |
| { |
| pci_dma_ops = dma_ops; |
| } |
| |
| struct dma_mapping_ops *get_pci_dma_ops(void) |
| { |
| return pci_dma_ops; |
| } |
| EXPORT_SYMBOL(get_pci_dma_ops); |
| |
| static void fixup_broken_pcnet32(struct pci_dev* dev) |
| { |
| if ((dev->class>>8 == PCI_CLASS_NETWORK_ETHERNET)) { |
| dev->vendor = PCI_VENDOR_ID_AMD; |
| pci_write_config_word(dev, PCI_VENDOR_ID, PCI_VENDOR_ID_AMD); |
| } |
| } |
| DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_TRIDENT, PCI_ANY_ID, fixup_broken_pcnet32); |
| |
| void pcibios_resource_to_bus(struct pci_dev *dev, struct pci_bus_region *region, |
| struct resource *res) |
| { |
| unsigned long offset = 0; |
| struct pci_controller *hose = pci_bus_to_host(dev->bus); |
| |
| if (!hose) |
| return; |
| |
| if (res->flags & IORESOURCE_IO) |
| offset = (unsigned long)hose->io_base_virt - _IO_BASE; |
| |
| if (res->flags & IORESOURCE_MEM) |
| offset = hose->pci_mem_offset; |
| |
| region->start = res->start - offset; |
| region->end = res->end - offset; |
| } |
| |
| void pcibios_bus_to_resource(struct pci_dev *dev, struct resource *res, |
| struct pci_bus_region *region) |
| { |
| unsigned long offset = 0; |
| struct pci_controller *hose = pci_bus_to_host(dev->bus); |
| |
| if (!hose) |
| return; |
| |
| if (res->flags & IORESOURCE_IO) |
| offset = (unsigned long)hose->io_base_virt - _IO_BASE; |
| |
| if (res->flags & IORESOURCE_MEM) |
| offset = hose->pci_mem_offset; |
| |
| res->start = region->start + offset; |
| res->end = region->end + offset; |
| } |
| |
| #ifdef CONFIG_HOTPLUG |
| EXPORT_SYMBOL(pcibios_resource_to_bus); |
| EXPORT_SYMBOL(pcibios_bus_to_resource); |
| #endif |
| |
| /* |
| * We need to avoid collisions with `mirrored' VGA ports |
| * and other strange ISA hardware, so we always want the |
| * addresses to be allocated in the 0x000-0x0ff region |
| * modulo 0x400. |
| * |
| * Why? Because some silly external IO cards only decode |
| * the low 10 bits of the IO address. The 0x00-0xff region |
| * is reserved for motherboard devices that decode all 16 |
| * bits, so it's ok to allocate at, say, 0x2800-0x28ff, |
| * but we want to try to avoid allocating at 0x2900-0x2bff |
| * which might have be mirrored at 0x0100-0x03ff.. |
| */ |
| void pcibios_align_resource(void *data, struct resource *res, |
| resource_size_t size, resource_size_t align) |
| { |
| struct pci_dev *dev = data; |
| struct pci_controller *hose = pci_bus_to_host(dev->bus); |
| resource_size_t start = res->start; |
| unsigned long alignto; |
| |
| if (res->flags & IORESOURCE_IO) { |
| unsigned long offset = (unsigned long)hose->io_base_virt - |
| _IO_BASE; |
| /* Make sure we start at our min on all hoses */ |
| if (start - offset < PCIBIOS_MIN_IO) |
| start = PCIBIOS_MIN_IO + offset; |
| |
| /* |
| * Put everything into 0x00-0xff region modulo 0x400 |
| */ |
| if (start & 0x300) |
| start = (start + 0x3ff) & ~0x3ff; |
| |
| } else if (res->flags & IORESOURCE_MEM) { |
| /* Make sure we start at our min on all hoses */ |
| if (start - hose->pci_mem_offset < PCIBIOS_MIN_MEM) |
| start = PCIBIOS_MIN_MEM + hose->pci_mem_offset; |
| |
| /* Align to multiple of size of minimum base. */ |
| alignto = max(0x1000UL, align); |
| start = ALIGN(start, alignto); |
| } |
| |
| res->start = start; |
| } |
| |
| void __devinit pcibios_claim_one_bus(struct pci_bus *b) |
| { |
| struct pci_dev *dev; |
| struct pci_bus *child_bus; |
| |
| list_for_each_entry(dev, &b->devices, bus_list) { |
| int i; |
| |
| for (i = 0; i < PCI_NUM_RESOURCES; i++) { |
| struct resource *r = &dev->resource[i]; |
| |
| if (r->parent || !r->start || !r->flags) |
| continue; |
| pci_claim_resource(dev, i); |
| } |
| } |
| |
| list_for_each_entry(child_bus, &b->children, node) |
| pcibios_claim_one_bus(child_bus); |
| } |
| #ifdef CONFIG_HOTPLUG |
| EXPORT_SYMBOL_GPL(pcibios_claim_one_bus); |
| #endif |
| |
| static void __init pcibios_claim_of_setup(void) |
| { |
| struct pci_bus *b; |
| |
| if (firmware_has_feature(FW_FEATURE_ISERIES)) |
| return; |
| |
| list_for_each_entry(b, &pci_root_buses, node) |
| pcibios_claim_one_bus(b); |
| } |
| |
| static u32 get_int_prop(struct device_node *np, const char *name, u32 def) |
| { |
| const u32 *prop; |
| int len; |
| |
| prop = of_get_property(np, name, &len); |
| if (prop && len >= 4) |
| return *prop; |
| return def; |
| } |
| |
| static unsigned int pci_parse_of_flags(u32 addr0) |
| { |
| unsigned int flags = 0; |
| |
| if (addr0 & 0x02000000) { |
| flags = IORESOURCE_MEM | PCI_BASE_ADDRESS_SPACE_MEMORY; |
| flags |= (addr0 >> 22) & PCI_BASE_ADDRESS_MEM_TYPE_64; |
| flags |= (addr0 >> 28) & PCI_BASE_ADDRESS_MEM_TYPE_1M; |
| if (addr0 & 0x40000000) |
| flags |= IORESOURCE_PREFETCH |
| | PCI_BASE_ADDRESS_MEM_PREFETCH; |
| } else if (addr0 & 0x01000000) |
| flags = IORESOURCE_IO | PCI_BASE_ADDRESS_SPACE_IO; |
| return flags; |
| } |
| |
| #define GET_64BIT(prop, i) ((((u64) (prop)[(i)]) << 32) | (prop)[(i)+1]) |
| |
| static void pci_parse_of_addrs(struct device_node *node, struct pci_dev *dev) |
| { |
| u64 base, size; |
| unsigned int flags; |
| struct resource *res; |
| const u32 *addrs; |
| u32 i; |
| int proplen; |
| |
| addrs = of_get_property(node, "assigned-addresses", &proplen); |
| if (!addrs) |
| return; |
| DBG(" parse addresses (%d bytes) @ %p\n", proplen, addrs); |
| for (; proplen >= 20; proplen -= 20, addrs += 5) { |
| flags = pci_parse_of_flags(addrs[0]); |
| if (!flags) |
| continue; |
| base = GET_64BIT(addrs, 1); |
| size = GET_64BIT(addrs, 3); |
| if (!size) |
| continue; |
| i = addrs[0] & 0xff; |
| DBG(" base: %llx, size: %llx, i: %x\n", |
| (unsigned long long)base, (unsigned long long)size, i); |
| |
| if (PCI_BASE_ADDRESS_0 <= i && i <= PCI_BASE_ADDRESS_5) { |
| res = &dev->resource[(i - PCI_BASE_ADDRESS_0) >> 2]; |
| } else if (i == dev->rom_base_reg) { |
| res = &dev->resource[PCI_ROM_RESOURCE]; |
| flags |= IORESOURCE_READONLY | IORESOURCE_CACHEABLE; |
| } else { |
| printk(KERN_ERR "PCI: bad cfg reg num 0x%x\n", i); |
| continue; |
| } |
| res->start = base; |
| res->end = base + size - 1; |
| res->flags = flags; |
| res->name = pci_name(dev); |
| fixup_resource(res, dev); |
| } |
| } |
| |
| struct pci_dev *of_create_pci_dev(struct device_node *node, |
| struct pci_bus *bus, int devfn) |
| { |
| struct pci_dev *dev; |
| const char *type; |
| |
| dev = alloc_pci_dev(); |
| if (!dev) |
| return NULL; |
| type = of_get_property(node, "device_type", NULL); |
| if (type == NULL) |
| type = ""; |
| |
| DBG(" create device, devfn: %x, type: %s\n", devfn, type); |
| |
| dev->bus = bus; |
| dev->sysdata = node; |
| dev->dev.parent = bus->bridge; |
| dev->dev.bus = &pci_bus_type; |
| dev->devfn = devfn; |
| dev->multifunction = 0; /* maybe a lie? */ |
| |
| dev->vendor = get_int_prop(node, "vendor-id", 0xffff); |
| dev->device = get_int_prop(node, "device-id", 0xffff); |
| dev->subsystem_vendor = get_int_prop(node, "subsystem-vendor-id", 0); |
| dev->subsystem_device = get_int_prop(node, "subsystem-id", 0); |
| |
| dev->cfg_size = pci_cfg_space_size(dev); |
| |
| sprintf(pci_name(dev), "%04x:%02x:%02x.%d", pci_domain_nr(bus), |
| dev->bus->number, PCI_SLOT(devfn), PCI_FUNC(devfn)); |
| dev->class = get_int_prop(node, "class-code", 0); |
| |
| DBG(" class: 0x%x\n", dev->class); |
| |
| dev->current_state = 4; /* unknown power state */ |
| dev->error_state = pci_channel_io_normal; |
| |
| if (!strcmp(type, "pci") || !strcmp(type, "pciex")) { |
| /* a PCI-PCI bridge */ |
| dev->hdr_type = PCI_HEADER_TYPE_BRIDGE; |
| dev->rom_base_reg = PCI_ROM_ADDRESS1; |
| } else if (!strcmp(type, "cardbus")) { |
| dev->hdr_type = PCI_HEADER_TYPE_CARDBUS; |
| } else { |
| dev->hdr_type = PCI_HEADER_TYPE_NORMAL; |
| dev->rom_base_reg = PCI_ROM_ADDRESS; |
| /* Maybe do a default OF mapping here */ |
| dev->irq = NO_IRQ; |
| } |
| |
| pci_parse_of_addrs(node, dev); |
| |
| DBG(" adding to system ...\n"); |
| |
| pci_device_add(dev, bus); |
| |
| return dev; |
| } |
| EXPORT_SYMBOL(of_create_pci_dev); |
| |
| void __devinit of_scan_bus(struct device_node *node, |
| struct pci_bus *bus) |
| { |
| struct device_node *child = NULL; |
| const u32 *reg; |
| int reglen, devfn; |
| struct pci_dev *dev; |
| |
| DBG("of_scan_bus(%s) bus no %d... \n", node->full_name, bus->number); |
| |
| while ((child = of_get_next_child(node, child)) != NULL) { |
| DBG(" * %s\n", child->full_name); |
| reg = of_get_property(child, "reg", ®len); |
| if (reg == NULL || reglen < 20) |
| continue; |
| devfn = (reg[0] >> 8) & 0xff; |
| |
| /* create a new pci_dev for this device */ |
| dev = of_create_pci_dev(child, bus, devfn); |
| if (!dev) |
| continue; |
| DBG("dev header type: %x\n", dev->hdr_type); |
| |
| if (dev->hdr_type == PCI_HEADER_TYPE_BRIDGE || |
| dev->hdr_type == PCI_HEADER_TYPE_CARDBUS) |
| of_scan_pci_bridge(child, dev); |
| } |
| |
| do_bus_setup(bus); |
| } |
| EXPORT_SYMBOL(of_scan_bus); |
| |
| void __devinit of_scan_pci_bridge(struct device_node *node, |
| struct pci_dev *dev) |
| { |
| struct pci_bus *bus; |
| const u32 *busrange, *ranges; |
| int len, i, mode; |
| struct resource *res; |
| unsigned int flags; |
| u64 size; |
| |
| DBG("of_scan_pci_bridge(%s)\n", node->full_name); |
| |
| /* parse bus-range property */ |
| busrange = of_get_property(node, "bus-range", &len); |
| if (busrange == NULL || len != 8) { |
| printk(KERN_DEBUG "Can't get bus-range for PCI-PCI bridge %s\n", |
| node->full_name); |
| return; |
| } |
| ranges = of_get_property(node, "ranges", &len); |
| if (ranges == NULL) { |
| printk(KERN_DEBUG "Can't get ranges for PCI-PCI bridge %s\n", |
| node->full_name); |
| return; |
| } |
| |
| bus = pci_add_new_bus(dev->bus, dev, busrange[0]); |
| if (!bus) { |
| printk(KERN_ERR "Failed to create pci bus for %s\n", |
| node->full_name); |
| return; |
| } |
| |
| bus->primary = dev->bus->number; |
| bus->subordinate = busrange[1]; |
| bus->bridge_ctl = 0; |
| bus->sysdata = node; |
| |
| /* parse ranges property */ |
| /* PCI #address-cells == 3 and #size-cells == 2 always */ |
| res = &dev->resource[PCI_BRIDGE_RESOURCES]; |
| for (i = 0; i < PCI_NUM_RESOURCES - PCI_BRIDGE_RESOURCES; ++i) { |
| res->flags = 0; |
| bus->resource[i] = res; |
| ++res; |
| } |
| i = 1; |
| for (; len >= 32; len -= 32, ranges += 8) { |
| flags = pci_parse_of_flags(ranges[0]); |
| size = GET_64BIT(ranges, 6); |
| if (flags == 0 || size == 0) |
| continue; |
| if (flags & IORESOURCE_IO) { |
| res = bus->resource[0]; |
| if (res->flags) { |
| printk(KERN_ERR "PCI: ignoring extra I/O range" |
| " for bridge %s\n", node->full_name); |
| continue; |
| } |
| } else { |
| if (i >= PCI_NUM_RESOURCES - PCI_BRIDGE_RESOURCES) { |
| printk(KERN_ERR "PCI: too many memory ranges" |
| " for bridge %s\n", node->full_name); |
| continue; |
| } |
| res = bus->resource[i]; |
| ++i; |
| } |
| res->start = GET_64BIT(ranges, 1); |
| res->end = res->start + size - 1; |
| res->flags = flags; |
| fixup_resource(res, dev); |
| } |
| sprintf(bus->name, "PCI Bus %04x:%02x", pci_domain_nr(bus), |
| bus->number); |
| DBG(" bus name: %s\n", bus->name); |
| |
| mode = PCI_PROBE_NORMAL; |
| if (ppc_md.pci_probe_mode) |
| mode = ppc_md.pci_probe_mode(bus); |
| DBG(" probe mode: %d\n", mode); |
| |
| if (mode == PCI_PROBE_DEVTREE) |
| of_scan_bus(node, bus); |
| else if (mode == PCI_PROBE_NORMAL) |
| pci_scan_child_bus(bus); |
| } |
| EXPORT_SYMBOL(of_scan_pci_bridge); |
| |
| void __devinit scan_phb(struct pci_controller *hose) |
| { |
| struct pci_bus *bus; |
| struct device_node *node = hose->arch_data; |
| int i, mode; |
| struct resource *res; |
| |
| DBG("Scanning PHB %s\n", node ? node->full_name : "<NO NAME>"); |
| |
| bus = pci_create_bus(hose->parent, hose->first_busno, hose->ops, node); |
| if (bus == NULL) { |
| printk(KERN_ERR "Failed to create bus for PCI domain %04x\n", |
| hose->global_number); |
| return; |
| } |
| bus->secondary = hose->first_busno; |
| hose->bus = bus; |
| |
| if (!firmware_has_feature(FW_FEATURE_ISERIES)) |
| pcibios_map_io_space(bus); |
| |
| bus->resource[0] = res = &hose->io_resource; |
| if (res->flags && request_resource(&ioport_resource, res)) { |
| printk(KERN_ERR "Failed to request PCI IO region " |
| "on PCI domain %04x\n", hose->global_number); |
| DBG("res->start = 0x%016lx, res->end = 0x%016lx\n", |
| res->start, res->end); |
| } |
| |
| for (i = 0; i < 3; ++i) { |
| res = &hose->mem_resources[i]; |
| bus->resource[i+1] = res; |
| if (res->flags && request_resource(&iomem_resource, res)) |
| printk(KERN_ERR "Failed to request PCI memory region " |
| "on PCI domain %04x\n", hose->global_number); |
| } |
| |
| mode = PCI_PROBE_NORMAL; |
| |
| if (node && ppc_md.pci_probe_mode) |
| mode = ppc_md.pci_probe_mode(bus); |
| DBG(" probe mode: %d\n", mode); |
| if (mode == PCI_PROBE_DEVTREE) { |
| bus->subordinate = hose->last_busno; |
| of_scan_bus(node, bus); |
| } |
| |
| if (mode == PCI_PROBE_NORMAL) |
| hose->last_busno = bus->subordinate = pci_scan_child_bus(bus); |
| } |
| |
| static int __init pcibios_init(void) |
| { |
| struct pci_controller *hose, *tmp; |
| |
| /* For now, override phys_mem_access_prot. If we need it, |
| * later, we may move that initialization to each ppc_md |
| */ |
| ppc_md.phys_mem_access_prot = pci_phys_mem_access_prot; |
| |
| if (firmware_has_feature(FW_FEATURE_ISERIES)) |
| iSeries_pcibios_init(); |
| |
| printk(KERN_DEBUG "PCI: Probing PCI hardware\n"); |
| |
| /* Scan all of the recorded PCI controllers. */ |
| list_for_each_entry_safe(hose, tmp, &hose_list, list_node) { |
| scan_phb(hose); |
| pci_bus_add_devices(hose->bus); |
| } |
| |
| if (!firmware_has_feature(FW_FEATURE_ISERIES)) { |
| if (pci_probe_only) |
| pcibios_claim_of_setup(); |
| else |
| /* FIXME: `else' will be removed when |
| pci_assign_unassigned_resources() is able to work |
| correctly with [partially] allocated PCI tree. */ |
| pci_assign_unassigned_resources(); |
| } |
| |
| /* Call machine dependent final fixup */ |
| if (ppc_md.pcibios_fixup) |
| ppc_md.pcibios_fixup(); |
| |
| printk(KERN_DEBUG "PCI: Probing PCI hardware done\n"); |
| |
| return 0; |
| } |
| |
| subsys_initcall(pcibios_init); |
| |
| int pcibios_enable_device(struct pci_dev *dev, int mask) |
| { |
| u16 cmd, oldcmd; |
| int i; |
| |
| pci_read_config_word(dev, PCI_COMMAND, &cmd); |
| oldcmd = cmd; |
| |
| for (i = 0; i < PCI_NUM_RESOURCES; i++) { |
| struct resource *res = &dev->resource[i]; |
| |
| /* Only set up the requested stuff */ |
| if (!(mask & (1<<i))) |
| continue; |
| |
| if (res->flags & IORESOURCE_IO) |
| cmd |= PCI_COMMAND_IO; |
| if (res->flags & IORESOURCE_MEM) |
| cmd |= PCI_COMMAND_MEMORY; |
| } |
| |
| if (cmd != oldcmd) { |
| printk(KERN_DEBUG "PCI: Enabling device: (%s), cmd %x\n", |
| pci_name(dev), cmd); |
| /* Enable the appropriate bits in the PCI command register. */ |
| pci_write_config_word(dev, PCI_COMMAND, cmd); |
| } |
| return 0; |
| } |
| |
| /* Decide whether to display the domain number in /proc */ |
| int pci_proc_domain(struct pci_bus *bus) |
| { |
| if (firmware_has_feature(FW_FEATURE_ISERIES)) |
| return 0; |
| else { |
| struct pci_controller *hose = pci_bus_to_host(bus); |
| return hose->buid; |
| } |
| } |
| |
| void __devinit pci_process_bridge_OF_ranges(struct pci_controller *hose, |
| struct device_node *dev, int prim) |
| { |
| const unsigned int *ranges; |
| unsigned int pci_space; |
| unsigned long size; |
| int rlen = 0; |
| int memno = 0; |
| struct resource *res; |
| int np, na = of_n_addr_cells(dev); |
| unsigned long pci_addr, cpu_phys_addr; |
| |
| np = na + 5; |
| |
| /* From "PCI Binding to 1275" |
| * The ranges property is laid out as an array of elements, |
| * each of which comprises: |
| * cells 0 - 2: a PCI address |
| * cells 3 or 3+4: a CPU physical address |
| * (size depending on dev->n_addr_cells) |
| * cells 4+5 or 5+6: the size of the range |
| */ |
| ranges = of_get_property(dev, "ranges", &rlen); |
| if (ranges == NULL) |
| return; |
| hose->io_base_phys = 0; |
| while ((rlen -= np * sizeof(unsigned int)) >= 0) { |
| res = NULL; |
| pci_space = ranges[0]; |
| pci_addr = ((unsigned long)ranges[1] << 32) | ranges[2]; |
| cpu_phys_addr = of_translate_address(dev, &ranges[3]); |
| size = ((unsigned long)ranges[na+3] << 32) | ranges[na+4]; |
| ranges += np; |
| if (size == 0) |
| continue; |
| |
| /* Now consume following elements while they are contiguous */ |
| while (rlen >= np * sizeof(unsigned int)) { |
| unsigned long addr, phys; |
| |
| if (ranges[0] != pci_space) |
| break; |
| addr = ((unsigned long)ranges[1] << 32) | ranges[2]; |
| phys = ranges[3]; |
| if (na >= 2) |
| phys = (phys << 32) | ranges[4]; |
| if (addr != pci_addr + size || |
| phys != cpu_phys_addr + size) |
| break; |
| |
| size += ((unsigned long)ranges[na+3] << 32) |
| | ranges[na+4]; |
| ranges += np; |
| rlen -= np * sizeof(unsigned int); |
| } |
| |
| switch ((pci_space >> 24) & 0x3) { |
| case 1: /* I/O space */ |
| hose->io_base_phys = cpu_phys_addr - pci_addr; |
| /* handle from 0 to top of I/O window */ |
| hose->pci_io_size = pci_addr + size; |
| |
| res = &hose->io_resource; |
| res->flags = IORESOURCE_IO; |
| res->start = pci_addr; |
| DBG("phb%d: IO 0x%lx -> 0x%lx\n", hose->global_number, |
| res->start, res->start + size - 1); |
| break; |
| case 2: /* memory space */ |
| memno = 0; |
| while (memno < 3 && hose->mem_resources[memno].flags) |
| ++memno; |
| |
| if (memno == 0) |
| hose->pci_mem_offset = cpu_phys_addr - pci_addr; |
| if (memno < 3) { |
| res = &hose->mem_resources[memno]; |
| res->flags = IORESOURCE_MEM; |
| res->start = cpu_phys_addr; |
| DBG("phb%d: MEM 0x%lx -> 0x%lx\n", hose->global_number, |
| res->start, res->start + size - 1); |
| } |
| break; |
| } |
| if (res != NULL) { |
| res->name = dev->full_name; |
| res->end = res->start + size - 1; |
| res->parent = NULL; |
| res->sibling = NULL; |
| res->child = NULL; |
| } |
| } |
| } |
| |
| #ifdef CONFIG_HOTPLUG |
| |
| int pcibios_unmap_io_space(struct pci_bus *bus) |
| { |
| struct pci_controller *hose; |
| |
| WARN_ON(bus == NULL); |
| |
| /* If this is not a PHB, we only flush the hash table over |
| * the area mapped by this bridge. We don't play with the PTE |
| * mappings since we might have to deal with sub-page alignemnts |
| * so flushing the hash table is the only sane way to make sure |
| * that no hash entries are covering that removed bridge area |
| * while still allowing other busses overlapping those pages |
| */ |
| if (bus->self) { |
| struct resource *res = bus->resource[0]; |
| |
| DBG("IO unmapping for PCI-PCI bridge %s\n", |
| pci_name(bus->self)); |
| |
| __flush_hash_table_range(&init_mm, res->start + _IO_BASE, |
| res->end - res->start + 1); |
| return 0; |
| } |
| |
| /* Get the host bridge */ |
| hose = pci_bus_to_host(bus); |
| |
| /* Check if we have IOs allocated */ |
| if (hose->io_base_alloc == 0) |
| return 0; |
| |
| DBG("IO unmapping for PHB %s\n", |
| ((struct device_node *)hose->arch_data)->full_name); |
| DBG(" alloc=0x%p\n", hose->io_base_alloc); |
| |
| /* This is a PHB, we fully unmap the IO area */ |
| vunmap(hose->io_base_alloc); |
| |
| return 0; |
| } |
| EXPORT_SYMBOL_GPL(pcibios_unmap_io_space); |
| |
| #endif /* CONFIG_HOTPLUG */ |
| |
| int __devinit pcibios_map_io_space(struct pci_bus *bus) |
| { |
| struct vm_struct *area; |
| unsigned long phys_page; |
| unsigned long size_page; |
| unsigned long io_virt_offset; |
| struct pci_controller *hose; |
| |
| WARN_ON(bus == NULL); |
| |
| /* If this not a PHB, nothing to do, page tables still exist and |
| * thus HPTEs will be faulted in when needed |
| */ |
| if (bus->self) { |
| DBG("IO mapping for PCI-PCI bridge %s\n", |
| pci_name(bus->self)); |
| DBG(" virt=0x%016lx...0x%016lx\n", |
| bus->resource[0]->start + _IO_BASE, |
| bus->resource[0]->end + _IO_BASE); |
| return 0; |
| } |
| |
| /* Get the host bridge */ |
| hose = pci_bus_to_host(bus); |
| phys_page = _ALIGN_DOWN(hose->io_base_phys, PAGE_SIZE); |
| size_page = _ALIGN_UP(hose->pci_io_size, PAGE_SIZE); |
| |
| /* Make sure IO area address is clear */ |
| hose->io_base_alloc = NULL; |
| |
| /* If there's no IO to map on that bus, get away too */ |
| if (hose->pci_io_size == 0 || hose->io_base_phys == 0) |
| return 0; |
| |
| /* Let's allocate some IO space for that guy. We don't pass |
| * VM_IOREMAP because we don't care about alignment tricks that |
| * the core does in that case. Maybe we should due to stupid card |
| * with incomplete address decoding but I'd rather not deal with |
| * those outside of the reserved 64K legacy region. |
| */ |
| area = __get_vm_area(size_page, 0, PHB_IO_BASE, PHB_IO_END); |
| if (area == NULL) |
| return -ENOMEM; |
| hose->io_base_alloc = area->addr; |
| hose->io_base_virt = (void __iomem *)(area->addr + |
| hose->io_base_phys - phys_page); |
| |
| DBG("IO mapping for PHB %s\n", |
| ((struct device_node *)hose->arch_data)->full_name); |
| DBG(" phys=0x%016lx, virt=0x%p (alloc=0x%p)\n", |
| hose->io_base_phys, hose->io_base_virt, hose->io_base_alloc); |
| DBG(" size=0x%016lx (alloc=0x%016lx)\n", |
| hose->pci_io_size, size_page); |
| |
| /* Establish the mapping */ |
| if (__ioremap_at(phys_page, area->addr, size_page, |
| _PAGE_NO_CACHE | _PAGE_GUARDED) == NULL) |
| return -ENOMEM; |
| |
| /* Fixup hose IO resource */ |
| io_virt_offset = (unsigned long)hose->io_base_virt - _IO_BASE; |
| hose->io_resource.start += io_virt_offset; |
| hose->io_resource.end += io_virt_offset; |
| |
| DBG(" hose->io_resource=0x%016lx...0x%016lx\n", |
| hose->io_resource.start, hose->io_resource.end); |
| |
| return 0; |
| } |
| EXPORT_SYMBOL_GPL(pcibios_map_io_space); |
| |
| static void __devinit fixup_resource(struct resource *res, struct pci_dev *dev) |
| { |
| struct pci_controller *hose = pci_bus_to_host(dev->bus); |
| unsigned long offset; |
| |
| if (res->flags & IORESOURCE_IO) { |
| offset = (unsigned long)hose->io_base_virt - _IO_BASE; |
| res->start += offset; |
| res->end += offset; |
| } else if (res->flags & IORESOURCE_MEM) { |
| res->start += hose->pci_mem_offset; |
| res->end += hose->pci_mem_offset; |
| } |
| } |
| |
| void __devinit pcibios_fixup_device_resources(struct pci_dev *dev, |
| struct pci_bus *bus) |
| { |
| /* Update device resources. */ |
| int i; |
| |
| DBG("%s: Fixup resources:\n", pci_name(dev)); |
| for (i = 0; i < PCI_NUM_RESOURCES; i++) { |
| struct resource *res = &dev->resource[i]; |
| if (!res->flags) |
| continue; |
| |
| DBG(" 0x%02x < %08lx:0x%016lx...0x%016lx\n", |
| i, res->flags, res->start, res->end); |
| |
| fixup_resource(res, dev); |
| |
| DBG(" > %08lx:0x%016lx...0x%016lx\n", |
| res->flags, res->start, res->end); |
| } |
| } |
| EXPORT_SYMBOL(pcibios_fixup_device_resources); |
| |
| void __devinit pcibios_setup_new_device(struct pci_dev *dev) |
| { |
| struct dev_archdata *sd = &dev->dev.archdata; |
| |
| sd->of_node = pci_device_to_OF_node(dev); |
| |
| DBG("PCI device %s OF node: %s\n", pci_name(dev), |
| sd->of_node ? sd->of_node->full_name : "<none>"); |
| |
| sd->dma_ops = pci_dma_ops; |
| #ifdef CONFIG_NUMA |
| sd->numa_node = pcibus_to_node(dev->bus); |
| #else |
| sd->numa_node = -1; |
| #endif |
| if (ppc_md.pci_dma_dev_setup) |
| ppc_md.pci_dma_dev_setup(dev); |
| } |
| EXPORT_SYMBOL(pcibios_setup_new_device); |
| |
| static void __devinit do_bus_setup(struct pci_bus *bus) |
| { |
| struct pci_dev *dev; |
| |
| if (ppc_md.pci_dma_bus_setup) |
| ppc_md.pci_dma_bus_setup(bus); |
| |
| list_for_each_entry(dev, &bus->devices, bus_list) |
| pcibios_setup_new_device(dev); |
| |
| /* Read default IRQs and fixup if necessary */ |
| list_for_each_entry(dev, &bus->devices, bus_list) { |
| pci_read_irq_line(dev); |
| if (ppc_md.pci_irq_fixup) |
| ppc_md.pci_irq_fixup(dev); |
| } |
| } |
| |
| void __devinit pcibios_fixup_bus(struct pci_bus *bus) |
| { |
| struct pci_dev *dev = bus->self; |
| struct device_node *np; |
| |
| np = pci_bus_to_OF_node(bus); |
| |
| DBG("pcibios_fixup_bus(%s)\n", np ? np->full_name : "<???>"); |
| |
| if (dev && pci_probe_only && |
| (dev->class >> 8) == PCI_CLASS_BRIDGE_PCI) { |
| /* This is a subordinate bridge */ |
| |
| pci_read_bridge_bases(bus); |
| pcibios_fixup_device_resources(dev, bus); |
| } |
| |
| do_bus_setup(bus); |
| |
| if (!pci_probe_only) |
| return; |
| |
| list_for_each_entry(dev, &bus->devices, bus_list) |
| if ((dev->class >> 8) != PCI_CLASS_BRIDGE_PCI) |
| pcibios_fixup_device_resources(dev, bus); |
| } |
| EXPORT_SYMBOL(pcibios_fixup_bus); |
| |
| unsigned long pci_address_to_pio(phys_addr_t address) |
| { |
| struct pci_controller *hose, *tmp; |
| |
| list_for_each_entry_safe(hose, tmp, &hose_list, list_node) { |
| if (address >= hose->io_base_phys && |
| address < (hose->io_base_phys + hose->pci_io_size)) { |
| unsigned long base = |
| (unsigned long)hose->io_base_virt - _IO_BASE; |
| return base + (address - hose->io_base_phys); |
| } |
| } |
| return (unsigned int)-1; |
| } |
| EXPORT_SYMBOL_GPL(pci_address_to_pio); |
| |
| |
| #define IOBASE_BRIDGE_NUMBER 0 |
| #define IOBASE_MEMORY 1 |
| #define IOBASE_IO 2 |
| #define IOBASE_ISA_IO 3 |
| #define IOBASE_ISA_MEM 4 |
| |
| long sys_pciconfig_iobase(long which, unsigned long in_bus, |
| unsigned long in_devfn) |
| { |
| struct pci_controller* hose; |
| struct list_head *ln; |
| struct pci_bus *bus = NULL; |
| struct device_node *hose_node; |
| |
| /* Argh ! Please forgive me for that hack, but that's the |
| * simplest way to get existing XFree to not lockup on some |
| * G5 machines... So when something asks for bus 0 io base |
| * (bus 0 is HT root), we return the AGP one instead. |
| */ |
| if (machine_is_compatible("MacRISC4")) |
| if (in_bus == 0) |
| in_bus = 0xf0; |
| |
| /* That syscall isn't quite compatible with PCI domains, but it's |
| * used on pre-domains setup. We return the first match |
| */ |
| |
| for (ln = pci_root_buses.next; ln != &pci_root_buses; ln = ln->next) { |
| bus = pci_bus_b(ln); |
| if (in_bus >= bus->number && in_bus <= bus->subordinate) |
| break; |
| bus = NULL; |
| } |
| if (bus == NULL || bus->sysdata == NULL) |
| return -ENODEV; |
| |
| hose_node = (struct device_node *)bus->sysdata; |
| hose = PCI_DN(hose_node)->phb; |
| |
| switch (which) { |
| case IOBASE_BRIDGE_NUMBER: |
| return (long)hose->first_busno; |
| case IOBASE_MEMORY: |
| return (long)hose->pci_mem_offset; |
| case IOBASE_IO: |
| return (long)hose->io_base_phys; |
| case IOBASE_ISA_IO: |
| return (long)isa_io_base; |
| case IOBASE_ISA_MEM: |
| return -EINVAL; |
| } |
| |
| return -EOPNOTSUPP; |
| } |
| |
| #ifdef CONFIG_NUMA |
| int pcibus_to_node(struct pci_bus *bus) |
| { |
| struct pci_controller *phb = pci_bus_to_host(bus); |
| return phb->node; |
| } |
| EXPORT_SYMBOL(pcibus_to_node); |
| #endif |