| /* |
| * Universal Host Controller Interface driver for USB. |
| * |
| * Maintainer: Alan Stern <stern@rowland.harvard.edu> |
| * |
| * (C) Copyright 1999 Linus Torvalds |
| * (C) Copyright 1999-2002 Johannes Erdfelt, johannes@erdfelt.com |
| * (C) Copyright 1999 Randy Dunlap |
| * (C) Copyright 1999 Georg Acher, acher@in.tum.de |
| * (C) Copyright 1999 Deti Fliegl, deti@fliegl.de |
| * (C) Copyright 1999 Thomas Sailer, sailer@ife.ee.ethz.ch |
| * (C) Copyright 1999 Roman Weissgaerber, weissg@vienna.at |
| * (C) Copyright 2000 Yggdrasil Computing, Inc. (port of new PCI interface |
| * support from usb-ohci.c by Adam Richter, adam@yggdrasil.com). |
| * (C) Copyright 1999 Gregory P. Smith (from usb-ohci.c) |
| * (C) Copyright 2004 Alan Stern, stern@rowland.harvard.edu |
| */ |
| |
| static int uhci_urb_dequeue(struct usb_hcd *hcd, struct urb *urb); |
| static void uhci_unlink_generic(struct uhci_hcd *uhci, struct urb *urb); |
| static void uhci_remove_pending_urbps(struct uhci_hcd *uhci); |
| static void uhci_free_pending_qhs(struct uhci_hcd *uhci); |
| static void uhci_free_pending_tds(struct uhci_hcd *uhci); |
| |
| /* |
| * Technically, updating td->status here is a race, but it's not really a |
| * problem. The worst that can happen is that we set the IOC bit again |
| * generating a spurious interrupt. We could fix this by creating another |
| * QH and leaving the IOC bit always set, but then we would have to play |
| * games with the FSBR code to make sure we get the correct order in all |
| * the cases. I don't think it's worth the effort |
| */ |
| static inline void uhci_set_next_interrupt(struct uhci_hcd *uhci) |
| { |
| if (uhci->is_stopped) |
| mod_timer(&uhci_to_hcd(uhci)->rh_timer, jiffies); |
| uhci->term_td->status |= cpu_to_le32(TD_CTRL_IOC); |
| } |
| |
| static inline void uhci_clear_next_interrupt(struct uhci_hcd *uhci) |
| { |
| uhci->term_td->status &= ~cpu_to_le32(TD_CTRL_IOC); |
| } |
| |
| static inline void uhci_moveto_complete(struct uhci_hcd *uhci, |
| struct urb_priv *urbp) |
| { |
| list_move_tail(&urbp->urb_list, &uhci->complete_list); |
| } |
| |
| static struct uhci_td *uhci_alloc_td(struct uhci_hcd *uhci) |
| { |
| dma_addr_t dma_handle; |
| struct uhci_td *td; |
| |
| td = dma_pool_alloc(uhci->td_pool, GFP_ATOMIC, &dma_handle); |
| if (!td) |
| return NULL; |
| |
| td->dma_handle = dma_handle; |
| |
| td->link = UHCI_PTR_TERM; |
| td->buffer = 0; |
| |
| td->frame = -1; |
| |
| INIT_LIST_HEAD(&td->list); |
| INIT_LIST_HEAD(&td->remove_list); |
| INIT_LIST_HEAD(&td->fl_list); |
| |
| return td; |
| } |
| |
| static inline void uhci_fill_td(struct uhci_td *td, u32 status, |
| u32 token, u32 buffer) |
| { |
| td->status = cpu_to_le32(status); |
| td->token = cpu_to_le32(token); |
| td->buffer = cpu_to_le32(buffer); |
| } |
| |
| /* |
| * We insert Isochronous URB's directly into the frame list at the beginning |
| */ |
| static void uhci_insert_td_frame_list(struct uhci_hcd *uhci, struct uhci_td *td, unsigned framenum) |
| { |
| framenum &= (UHCI_NUMFRAMES - 1); |
| |
| td->frame = framenum; |
| |
| /* Is there a TD already mapped there? */ |
| if (uhci->fl->frame_cpu[framenum]) { |
| struct uhci_td *ftd, *ltd; |
| |
| ftd = uhci->fl->frame_cpu[framenum]; |
| ltd = list_entry(ftd->fl_list.prev, struct uhci_td, fl_list); |
| |
| list_add_tail(&td->fl_list, &ftd->fl_list); |
| |
| td->link = ltd->link; |
| wmb(); |
| ltd->link = cpu_to_le32(td->dma_handle); |
| } else { |
| td->link = uhci->fl->frame[framenum]; |
| wmb(); |
| uhci->fl->frame[framenum] = cpu_to_le32(td->dma_handle); |
| uhci->fl->frame_cpu[framenum] = td; |
| } |
| } |
| |
| static void uhci_remove_td(struct uhci_hcd *uhci, struct uhci_td *td) |
| { |
| /* If it's not inserted, don't remove it */ |
| if (td->frame == -1 && list_empty(&td->fl_list)) |
| return; |
| |
| if (td->frame != -1 && uhci->fl->frame_cpu[td->frame] == td) { |
| if (list_empty(&td->fl_list)) { |
| uhci->fl->frame[td->frame] = td->link; |
| uhci->fl->frame_cpu[td->frame] = NULL; |
| } else { |
| struct uhci_td *ntd; |
| |
| ntd = list_entry(td->fl_list.next, struct uhci_td, fl_list); |
| uhci->fl->frame[td->frame] = cpu_to_le32(ntd->dma_handle); |
| uhci->fl->frame_cpu[td->frame] = ntd; |
| } |
| } else { |
| struct uhci_td *ptd; |
| |
| ptd = list_entry(td->fl_list.prev, struct uhci_td, fl_list); |
| ptd->link = td->link; |
| } |
| |
| wmb(); |
| td->link = UHCI_PTR_TERM; |
| |
| list_del_init(&td->fl_list); |
| td->frame = -1; |
| } |
| |
| /* |
| * Inserts a td list into qh. |
| */ |
| static void uhci_insert_tds_in_qh(struct uhci_qh *qh, struct urb *urb, __le32 breadth) |
| { |
| struct urb_priv *urbp = (struct urb_priv *)urb->hcpriv; |
| struct uhci_td *td; |
| __le32 *plink; |
| |
| /* Ordering isn't important here yet since the QH hasn't been */ |
| /* inserted into the schedule yet */ |
| plink = &qh->element; |
| list_for_each_entry(td, &urbp->td_list, list) { |
| *plink = cpu_to_le32(td->dma_handle) | breadth; |
| plink = &td->link; |
| } |
| *plink = UHCI_PTR_TERM; |
| } |
| |
| static void uhci_free_td(struct uhci_hcd *uhci, struct uhci_td *td) |
| { |
| if (!list_empty(&td->list)) |
| dev_warn(uhci_dev(uhci), "td %p still in list!\n", td); |
| if (!list_empty(&td->remove_list)) |
| dev_warn(uhci_dev(uhci), "td %p still in remove_list!\n", td); |
| if (!list_empty(&td->fl_list)) |
| dev_warn(uhci_dev(uhci), "td %p still in fl_list!\n", td); |
| |
| dma_pool_free(uhci->td_pool, td, td->dma_handle); |
| } |
| |
| static struct uhci_qh *uhci_alloc_qh(struct uhci_hcd *uhci) |
| { |
| dma_addr_t dma_handle; |
| struct uhci_qh *qh; |
| |
| qh = dma_pool_alloc(uhci->qh_pool, GFP_ATOMIC, &dma_handle); |
| if (!qh) |
| return NULL; |
| |
| qh->dma_handle = dma_handle; |
| |
| qh->element = UHCI_PTR_TERM; |
| qh->link = UHCI_PTR_TERM; |
| |
| qh->urbp = NULL; |
| |
| INIT_LIST_HEAD(&qh->list); |
| INIT_LIST_HEAD(&qh->remove_list); |
| |
| return qh; |
| } |
| |
| static void uhci_free_qh(struct uhci_hcd *uhci, struct uhci_qh *qh) |
| { |
| if (!list_empty(&qh->list)) |
| dev_warn(uhci_dev(uhci), "qh %p list not empty!\n", qh); |
| if (!list_empty(&qh->remove_list)) |
| dev_warn(uhci_dev(uhci), "qh %p still in remove_list!\n", qh); |
| |
| dma_pool_free(uhci->qh_pool, qh, qh->dma_handle); |
| } |
| |
| /* |
| * Append this urb's qh after the last qh in skelqh->list |
| * |
| * Note that urb_priv.queue_list doesn't have a separate queue head; |
| * it's a ring with every element "live". |
| */ |
| static void uhci_insert_qh(struct uhci_hcd *uhci, struct uhci_qh *skelqh, struct urb *urb) |
| { |
| struct urb_priv *urbp = (struct urb_priv *)urb->hcpriv; |
| struct urb_priv *turbp; |
| struct uhci_qh *lqh; |
| |
| /* Grab the last QH */ |
| lqh = list_entry(skelqh->list.prev, struct uhci_qh, list); |
| |
| /* Point to the next skelqh */ |
| urbp->qh->link = lqh->link; |
| wmb(); /* Ordering is important */ |
| |
| /* |
| * Patch QHs for previous endpoint's queued URBs? HC goes |
| * here next, not to the next skelqh it now points to. |
| * |
| * lqh --> td ... --> qh ... --> td --> qh ... --> td |
| * | | | |
| * v v v |
| * +<----------------+-----------------+ |
| * v |
| * newqh --> td ... --> td |
| * | |
| * v |
| * ... |
| * |
| * The HC could see (and use!) any of these as we write them. |
| */ |
| lqh->link = cpu_to_le32(urbp->qh->dma_handle) | UHCI_PTR_QH; |
| if (lqh->urbp) { |
| list_for_each_entry(turbp, &lqh->urbp->queue_list, queue_list) |
| turbp->qh->link = lqh->link; |
| } |
| |
| list_add_tail(&urbp->qh->list, &skelqh->list); |
| } |
| |
| /* |
| * Start removal of QH from schedule; it finishes next frame. |
| * TDs should be unlinked before this is called. |
| */ |
| static void uhci_remove_qh(struct uhci_hcd *uhci, struct uhci_qh *qh) |
| { |
| struct uhci_qh *pqh; |
| __le32 newlink; |
| |
| if (!qh) |
| return; |
| |
| /* |
| * Only go through the hoops if it's actually linked in |
| */ |
| if (!list_empty(&qh->list)) { |
| |
| /* If our queue is nonempty, make the next URB the head */ |
| if (!list_empty(&qh->urbp->queue_list)) { |
| struct urb_priv *nurbp; |
| |
| nurbp = list_entry(qh->urbp->queue_list.next, |
| struct urb_priv, queue_list); |
| nurbp->queued = 0; |
| list_add(&nurbp->qh->list, &qh->list); |
| newlink = cpu_to_le32(nurbp->qh->dma_handle) | UHCI_PTR_QH; |
| } else |
| newlink = qh->link; |
| |
| /* Fix up the previous QH's queue to link to either |
| * the new head of this queue or the start of the |
| * next endpoint's queue. */ |
| pqh = list_entry(qh->list.prev, struct uhci_qh, list); |
| pqh->link = newlink; |
| if (pqh->urbp) { |
| struct urb_priv *turbp; |
| |
| list_for_each_entry(turbp, &pqh->urbp->queue_list, |
| queue_list) |
| turbp->qh->link = newlink; |
| } |
| wmb(); |
| |
| /* Leave qh->link in case the HC is on the QH now, it will */ |
| /* continue the rest of the schedule */ |
| qh->element = UHCI_PTR_TERM; |
| |
| list_del_init(&qh->list); |
| } |
| |
| list_del_init(&qh->urbp->queue_list); |
| qh->urbp = NULL; |
| |
| uhci_get_current_frame_number(uhci); |
| if (uhci->frame_number + uhci->is_stopped != uhci->qh_remove_age) { |
| uhci_free_pending_qhs(uhci); |
| uhci->qh_remove_age = uhci->frame_number; |
| } |
| |
| /* Check to see if the remove list is empty. Set the IOC bit */ |
| /* to force an interrupt so we can remove the QH */ |
| if (list_empty(&uhci->qh_remove_list)) |
| uhci_set_next_interrupt(uhci); |
| |
| list_add(&qh->remove_list, &uhci->qh_remove_list); |
| } |
| |
| static int uhci_fixup_toggle(struct urb *urb, unsigned int toggle) |
| { |
| struct urb_priv *urbp = (struct urb_priv *)urb->hcpriv; |
| struct uhci_td *td; |
| |
| list_for_each_entry(td, &urbp->td_list, list) { |
| if (toggle) |
| td->token |= cpu_to_le32(TD_TOKEN_TOGGLE); |
| else |
| td->token &= ~cpu_to_le32(TD_TOKEN_TOGGLE); |
| |
| toggle ^= 1; |
| } |
| |
| return toggle; |
| } |
| |
| /* This function will append one URB's QH to another URB's QH. This is for */ |
| /* queuing interrupt, control or bulk transfers */ |
| static void uhci_append_queued_urb(struct uhci_hcd *uhci, struct urb *eurb, struct urb *urb) |
| { |
| struct urb_priv *eurbp, *urbp, *furbp, *lurbp; |
| struct uhci_td *lltd; |
| |
| eurbp = eurb->hcpriv; |
| urbp = urb->hcpriv; |
| |
| /* Find the first URB in the queue */ |
| furbp = eurbp; |
| if (eurbp->queued) { |
| list_for_each_entry(furbp, &eurbp->queue_list, queue_list) |
| if (!furbp->queued) |
| break; |
| } |
| |
| lurbp = list_entry(furbp->queue_list.prev, struct urb_priv, queue_list); |
| |
| lltd = list_entry(lurbp->td_list.prev, struct uhci_td, list); |
| |
| /* Control transfers always start with toggle 0 */ |
| if (!usb_pipecontrol(urb->pipe)) |
| usb_settoggle(urb->dev, usb_pipeendpoint(urb->pipe), |
| usb_pipeout(urb->pipe), |
| uhci_fixup_toggle(urb, |
| uhci_toggle(td_token(lltd)) ^ 1)); |
| |
| /* All qh's in the queue need to link to the next queue */ |
| urbp->qh->link = eurbp->qh->link; |
| |
| wmb(); /* Make sure we flush everything */ |
| |
| lltd->link = cpu_to_le32(urbp->qh->dma_handle) | UHCI_PTR_QH; |
| |
| list_add_tail(&urbp->queue_list, &furbp->queue_list); |
| |
| urbp->queued = 1; |
| } |
| |
| static void uhci_delete_queued_urb(struct uhci_hcd *uhci, struct urb *urb) |
| { |
| struct urb_priv *urbp, *nurbp, *purbp, *turbp; |
| struct uhci_td *pltd; |
| unsigned int toggle; |
| |
| urbp = urb->hcpriv; |
| |
| if (list_empty(&urbp->queue_list)) |
| return; |
| |
| nurbp = list_entry(urbp->queue_list.next, struct urb_priv, queue_list); |
| |
| /* |
| * Fix up the toggle for the following URBs in the queue. |
| * Only needed for bulk and interrupt: control and isochronous |
| * endpoints don't propagate toggles between messages. |
| */ |
| if (usb_pipebulk(urb->pipe) || usb_pipeint(urb->pipe)) { |
| if (!urbp->queued) |
| /* We just set the toggle in uhci_unlink_generic */ |
| toggle = usb_gettoggle(urb->dev, |
| usb_pipeendpoint(urb->pipe), |
| usb_pipeout(urb->pipe)); |
| else { |
| /* If we're in the middle of the queue, grab the */ |
| /* toggle from the TD previous to us */ |
| purbp = list_entry(urbp->queue_list.prev, |
| struct urb_priv, queue_list); |
| pltd = list_entry(purbp->td_list.prev, |
| struct uhci_td, list); |
| toggle = uhci_toggle(td_token(pltd)) ^ 1; |
| } |
| |
| list_for_each_entry(turbp, &urbp->queue_list, queue_list) { |
| if (!turbp->queued) |
| break; |
| toggle = uhci_fixup_toggle(turbp->urb, toggle); |
| } |
| |
| usb_settoggle(urb->dev, usb_pipeendpoint(urb->pipe), |
| usb_pipeout(urb->pipe), toggle); |
| } |
| |
| if (urbp->queued) { |
| /* We're somewhere in the middle (or end). The case where |
| * we're at the head is handled in uhci_remove_qh(). */ |
| purbp = list_entry(urbp->queue_list.prev, struct urb_priv, |
| queue_list); |
| |
| pltd = list_entry(purbp->td_list.prev, struct uhci_td, list); |
| if (nurbp->queued) |
| pltd->link = cpu_to_le32(nurbp->qh->dma_handle) | UHCI_PTR_QH; |
| else |
| /* The next URB happens to be the beginning, so */ |
| /* we're the last, end the chain */ |
| pltd->link = UHCI_PTR_TERM; |
| } |
| |
| /* urbp->queue_list is handled in uhci_remove_qh() */ |
| } |
| |
| static struct urb_priv *uhci_alloc_urb_priv(struct uhci_hcd *uhci, struct urb *urb) |
| { |
| struct urb_priv *urbp; |
| |
| urbp = kmem_cache_alloc(uhci_up_cachep, SLAB_ATOMIC); |
| if (!urbp) |
| return NULL; |
| |
| memset((void *)urbp, 0, sizeof(*urbp)); |
| |
| urbp->inserttime = jiffies; |
| urbp->fsbrtime = jiffies; |
| urbp->urb = urb; |
| |
| INIT_LIST_HEAD(&urbp->td_list); |
| INIT_LIST_HEAD(&urbp->queue_list); |
| INIT_LIST_HEAD(&urbp->urb_list); |
| |
| list_add_tail(&urbp->urb_list, &uhci->urb_list); |
| |
| urb->hcpriv = urbp; |
| |
| return urbp; |
| } |
| |
| static void uhci_add_td_to_urb(struct urb *urb, struct uhci_td *td) |
| { |
| struct urb_priv *urbp = (struct urb_priv *)urb->hcpriv; |
| |
| td->urb = urb; |
| |
| list_add_tail(&td->list, &urbp->td_list); |
| } |
| |
| static void uhci_remove_td_from_urb(struct uhci_td *td) |
| { |
| if (list_empty(&td->list)) |
| return; |
| |
| list_del_init(&td->list); |
| |
| td->urb = NULL; |
| } |
| |
| static void uhci_destroy_urb_priv(struct uhci_hcd *uhci, struct urb *urb) |
| { |
| struct uhci_td *td, *tmp; |
| struct urb_priv *urbp; |
| |
| urbp = (struct urb_priv *)urb->hcpriv; |
| if (!urbp) |
| return; |
| |
| if (!list_empty(&urbp->urb_list)) |
| dev_warn(uhci_dev(uhci), "urb %p still on uhci->urb_list " |
| "or uhci->remove_list!\n", urb); |
| |
| uhci_get_current_frame_number(uhci); |
| if (uhci->frame_number + uhci->is_stopped != uhci->td_remove_age) { |
| uhci_free_pending_tds(uhci); |
| uhci->td_remove_age = uhci->frame_number; |
| } |
| |
| /* Check to see if the remove list is empty. Set the IOC bit */ |
| /* to force an interrupt so we can remove the TD's*/ |
| if (list_empty(&uhci->td_remove_list)) |
| uhci_set_next_interrupt(uhci); |
| |
| list_for_each_entry_safe(td, tmp, &urbp->td_list, list) { |
| uhci_remove_td_from_urb(td); |
| uhci_remove_td(uhci, td); |
| list_add(&td->remove_list, &uhci->td_remove_list); |
| } |
| |
| urb->hcpriv = NULL; |
| kmem_cache_free(uhci_up_cachep, urbp); |
| } |
| |
| static void uhci_inc_fsbr(struct uhci_hcd *uhci, struct urb *urb) |
| { |
| struct urb_priv *urbp = (struct urb_priv *)urb->hcpriv; |
| |
| if ((!(urb->transfer_flags & URB_NO_FSBR)) && !urbp->fsbr) { |
| urbp->fsbr = 1; |
| if (!uhci->fsbr++ && !uhci->fsbrtimeout) |
| uhci->skel_term_qh->link = cpu_to_le32(uhci->skel_fs_control_qh->dma_handle) | UHCI_PTR_QH; |
| } |
| } |
| |
| static void uhci_dec_fsbr(struct uhci_hcd *uhci, struct urb *urb) |
| { |
| struct urb_priv *urbp = (struct urb_priv *)urb->hcpriv; |
| |
| if ((!(urb->transfer_flags & URB_NO_FSBR)) && urbp->fsbr) { |
| urbp->fsbr = 0; |
| if (!--uhci->fsbr) |
| uhci->fsbrtimeout = jiffies + FSBR_DELAY; |
| } |
| } |
| |
| /* |
| * Map status to standard result codes |
| * |
| * <status> is (td_status(td) & 0xF60000), a.k.a. |
| * uhci_status_bits(td_status(td)). |
| * Note: <status> does not include the TD_CTRL_NAK bit. |
| * <dir_out> is True for output TDs and False for input TDs. |
| */ |
| static int uhci_map_status(int status, int dir_out) |
| { |
| if (!status) |
| return 0; |
| if (status & TD_CTRL_BITSTUFF) /* Bitstuff error */ |
| return -EPROTO; |
| if (status & TD_CTRL_CRCTIMEO) { /* CRC/Timeout */ |
| if (dir_out) |
| return -EPROTO; |
| else |
| return -EILSEQ; |
| } |
| if (status & TD_CTRL_BABBLE) /* Babble */ |
| return -EOVERFLOW; |
| if (status & TD_CTRL_DBUFERR) /* Buffer error */ |
| return -ENOSR; |
| if (status & TD_CTRL_STALLED) /* Stalled */ |
| return -EPIPE; |
| WARN_ON(status & TD_CTRL_ACTIVE); /* Active */ |
| return 0; |
| } |
| |
| /* |
| * Control transfers |
| */ |
| static int uhci_submit_control(struct uhci_hcd *uhci, struct urb *urb, struct urb *eurb) |
| { |
| struct urb_priv *urbp = (struct urb_priv *)urb->hcpriv; |
| struct uhci_td *td; |
| struct uhci_qh *qh, *skelqh; |
| unsigned long destination, status; |
| int maxsze = usb_maxpacket(urb->dev, urb->pipe, usb_pipeout(urb->pipe)); |
| int len = urb->transfer_buffer_length; |
| dma_addr_t data = urb->transfer_dma; |
| |
| /* The "pipe" thing contains the destination in bits 8--18 */ |
| destination = (urb->pipe & PIPE_DEVEP_MASK) | USB_PID_SETUP; |
| |
| /* 3 errors */ |
| status = TD_CTRL_ACTIVE | uhci_maxerr(3); |
| if (urb->dev->speed == USB_SPEED_LOW) |
| status |= TD_CTRL_LS; |
| |
| /* |
| * Build the TD for the control request setup packet |
| */ |
| td = uhci_alloc_td(uhci); |
| if (!td) |
| return -ENOMEM; |
| |
| uhci_add_td_to_urb(urb, td); |
| uhci_fill_td(td, status, destination | uhci_explen(7), |
| urb->setup_dma); |
| |
| /* |
| * If direction is "send", change the packet ID from SETUP (0x2D) |
| * to OUT (0xE1). Else change it from SETUP to IN (0x69) and |
| * set Short Packet Detect (SPD) for all data packets. |
| */ |
| if (usb_pipeout(urb->pipe)) |
| destination ^= (USB_PID_SETUP ^ USB_PID_OUT); |
| else { |
| destination ^= (USB_PID_SETUP ^ USB_PID_IN); |
| status |= TD_CTRL_SPD; |
| } |
| |
| /* |
| * Build the DATA TD's |
| */ |
| while (len > 0) { |
| int pktsze = len; |
| |
| if (pktsze > maxsze) |
| pktsze = maxsze; |
| |
| td = uhci_alloc_td(uhci); |
| if (!td) |
| return -ENOMEM; |
| |
| /* Alternate Data0/1 (start with Data1) */ |
| destination ^= TD_TOKEN_TOGGLE; |
| |
| uhci_add_td_to_urb(urb, td); |
| uhci_fill_td(td, status, destination | uhci_explen(pktsze - 1), |
| data); |
| |
| data += pktsze; |
| len -= pktsze; |
| } |
| |
| /* |
| * Build the final TD for control status |
| */ |
| td = uhci_alloc_td(uhci); |
| if (!td) |
| return -ENOMEM; |
| |
| /* |
| * It's IN if the pipe is an output pipe or we're not expecting |
| * data back. |
| */ |
| destination &= ~TD_TOKEN_PID_MASK; |
| if (usb_pipeout(urb->pipe) || !urb->transfer_buffer_length) |
| destination |= USB_PID_IN; |
| else |
| destination |= USB_PID_OUT; |
| |
| destination |= TD_TOKEN_TOGGLE; /* End in Data1 */ |
| |
| status &= ~TD_CTRL_SPD; |
| |
| uhci_add_td_to_urb(urb, td); |
| uhci_fill_td(td, status | TD_CTRL_IOC, |
| destination | uhci_explen(UHCI_NULL_DATA_SIZE), 0); |
| |
| qh = uhci_alloc_qh(uhci); |
| if (!qh) |
| return -ENOMEM; |
| |
| urbp->qh = qh; |
| qh->urbp = urbp; |
| |
| uhci_insert_tds_in_qh(qh, urb, UHCI_PTR_BREADTH); |
| |
| /* Low-speed transfers get a different queue, and won't hog the bus. |
| * Also, some devices enumerate better without FSBR; the easiest way |
| * to do that is to put URBs on the low-speed queue while the device |
| * is in the DEFAULT state. */ |
| if (urb->dev->speed == USB_SPEED_LOW || |
| urb->dev->state == USB_STATE_DEFAULT) |
| skelqh = uhci->skel_ls_control_qh; |
| else { |
| skelqh = uhci->skel_fs_control_qh; |
| uhci_inc_fsbr(uhci, urb); |
| } |
| |
| if (eurb) |
| uhci_append_queued_urb(uhci, eurb, urb); |
| else |
| uhci_insert_qh(uhci, skelqh, urb); |
| |
| return -EINPROGRESS; |
| } |
| |
| /* |
| * If control-IN transfer was short, the status packet wasn't sent. |
| * This routine changes the element pointer in the QH to point at the |
| * status TD. It's safe to do this even while the QH is live, because |
| * the hardware only updates the element pointer following a successful |
| * transfer. The inactive TD for the short packet won't cause an update, |
| * so the pointer won't get overwritten. The next time the controller |
| * sees this QH, it will send the status packet. |
| */ |
| static int usb_control_retrigger_status(struct uhci_hcd *uhci, struct urb *urb) |
| { |
| struct urb_priv *urbp = (struct urb_priv *)urb->hcpriv; |
| struct uhci_td *td; |
| |
| urbp->short_control_packet = 1; |
| |
| td = list_entry(urbp->td_list.prev, struct uhci_td, list); |
| urbp->qh->element = cpu_to_le32(td->dma_handle); |
| |
| return -EINPROGRESS; |
| } |
| |
| |
| static int uhci_result_control(struct uhci_hcd *uhci, struct urb *urb) |
| { |
| struct list_head *tmp, *head; |
| struct urb_priv *urbp = urb->hcpriv; |
| struct uhci_td *td; |
| unsigned int status; |
| int ret = 0; |
| |
| if (list_empty(&urbp->td_list)) |
| return -EINVAL; |
| |
| head = &urbp->td_list; |
| |
| if (urbp->short_control_packet) { |
| tmp = head->prev; |
| goto status_stage; |
| } |
| |
| tmp = head->next; |
| td = list_entry(tmp, struct uhci_td, list); |
| |
| /* The first TD is the SETUP stage, check the status, but skip */ |
| /* the count */ |
| status = uhci_status_bits(td_status(td)); |
| if (status & TD_CTRL_ACTIVE) |
| return -EINPROGRESS; |
| |
| if (status) |
| goto td_error; |
| |
| urb->actual_length = 0; |
| |
| /* The rest of the TD's (but the last) are data */ |
| tmp = tmp->next; |
| while (tmp != head && tmp->next != head) { |
| unsigned int ctrlstat; |
| |
| td = list_entry(tmp, struct uhci_td, list); |
| tmp = tmp->next; |
| |
| ctrlstat = td_status(td); |
| status = uhci_status_bits(ctrlstat); |
| if (status & TD_CTRL_ACTIVE) |
| return -EINPROGRESS; |
| |
| urb->actual_length += uhci_actual_length(ctrlstat); |
| |
| if (status) |
| goto td_error; |
| |
| /* Check to see if we received a short packet */ |
| if (uhci_actual_length(ctrlstat) < |
| uhci_expected_length(td_token(td))) { |
| if (urb->transfer_flags & URB_SHORT_NOT_OK) { |
| ret = -EREMOTEIO; |
| goto err; |
| } |
| |
| if (uhci_packetid(td_token(td)) == USB_PID_IN) |
| return usb_control_retrigger_status(uhci, urb); |
| else |
| return 0; |
| } |
| } |
| |
| status_stage: |
| td = list_entry(tmp, struct uhci_td, list); |
| |
| /* Control status stage */ |
| status = td_status(td); |
| |
| #ifdef I_HAVE_BUGGY_APC_BACKUPS |
| /* APC BackUPS Pro kludge */ |
| /* It tries to send all of the descriptor instead of the amount */ |
| /* we requested */ |
| if (status & TD_CTRL_IOC && /* IOC is masked out by uhci_status_bits */ |
| status & TD_CTRL_ACTIVE && |
| status & TD_CTRL_NAK) |
| return 0; |
| #endif |
| |
| status = uhci_status_bits(status); |
| if (status & TD_CTRL_ACTIVE) |
| return -EINPROGRESS; |
| |
| if (status) |
| goto td_error; |
| |
| return 0; |
| |
| td_error: |
| ret = uhci_map_status(status, uhci_packetout(td_token(td))); |
| |
| err: |
| if ((debug == 1 && ret != -EPIPE) || debug > 1) { |
| /* Some debugging code */ |
| dev_dbg(uhci_dev(uhci), "%s: failed with status %x\n", |
| __FUNCTION__, status); |
| |
| if (errbuf) { |
| /* Print the chain for debugging purposes */ |
| uhci_show_qh(urbp->qh, errbuf, ERRBUF_LEN, 0); |
| |
| lprintk(errbuf); |
| } |
| } |
| |
| return ret; |
| } |
| |
| /* |
| * Common submit for bulk and interrupt |
| */ |
| static int uhci_submit_common(struct uhci_hcd *uhci, struct urb *urb, struct urb *eurb, struct uhci_qh *skelqh) |
| { |
| struct uhci_td *td; |
| struct uhci_qh *qh; |
| unsigned long destination, status; |
| int maxsze = usb_maxpacket(urb->dev, urb->pipe, usb_pipeout(urb->pipe)); |
| int len = urb->transfer_buffer_length; |
| struct urb_priv *urbp = (struct urb_priv *)urb->hcpriv; |
| dma_addr_t data = urb->transfer_dma; |
| |
| if (len < 0) |
| return -EINVAL; |
| |
| /* The "pipe" thing contains the destination in bits 8--18 */ |
| destination = (urb->pipe & PIPE_DEVEP_MASK) | usb_packetid(urb->pipe); |
| |
| status = uhci_maxerr(3) | TD_CTRL_ACTIVE; |
| if (urb->dev->speed == USB_SPEED_LOW) |
| status |= TD_CTRL_LS; |
| if (usb_pipein(urb->pipe)) |
| status |= TD_CTRL_SPD; |
| |
| /* |
| * Build the DATA TD's |
| */ |
| do { /* Allow zero length packets */ |
| int pktsze = maxsze; |
| |
| if (pktsze >= len) { |
| pktsze = len; |
| if (!(urb->transfer_flags & URB_SHORT_NOT_OK)) |
| status &= ~TD_CTRL_SPD; |
| } |
| |
| td = uhci_alloc_td(uhci); |
| if (!td) |
| return -ENOMEM; |
| |
| uhci_add_td_to_urb(urb, td); |
| uhci_fill_td(td, status, destination | uhci_explen(pktsze - 1) | |
| (usb_gettoggle(urb->dev, usb_pipeendpoint(urb->pipe), |
| usb_pipeout(urb->pipe)) << TD_TOKEN_TOGGLE_SHIFT), |
| data); |
| |
| data += pktsze; |
| len -= maxsze; |
| |
| usb_dotoggle(urb->dev, usb_pipeendpoint(urb->pipe), |
| usb_pipeout(urb->pipe)); |
| } while (len > 0); |
| |
| /* |
| * URB_ZERO_PACKET means adding a 0-length packet, if direction |
| * is OUT and the transfer_length was an exact multiple of maxsze, |
| * hence (len = transfer_length - N * maxsze) == 0 |
| * however, if transfer_length == 0, the zero packet was already |
| * prepared above. |
| */ |
| if (usb_pipeout(urb->pipe) && (urb->transfer_flags & URB_ZERO_PACKET) && |
| !len && urb->transfer_buffer_length) { |
| td = uhci_alloc_td(uhci); |
| if (!td) |
| return -ENOMEM; |
| |
| uhci_add_td_to_urb(urb, td); |
| uhci_fill_td(td, status, destination | uhci_explen(UHCI_NULL_DATA_SIZE) | |
| (usb_gettoggle(urb->dev, usb_pipeendpoint(urb->pipe), |
| usb_pipeout(urb->pipe)) << TD_TOKEN_TOGGLE_SHIFT), |
| data); |
| |
| usb_dotoggle(urb->dev, usb_pipeendpoint(urb->pipe), |
| usb_pipeout(urb->pipe)); |
| } |
| |
| /* Set the interrupt-on-completion flag on the last packet. |
| * A more-or-less typical 4 KB URB (= size of one memory page) |
| * will require about 3 ms to transfer; that's a little on the |
| * fast side but not enough to justify delaying an interrupt |
| * more than 2 or 3 URBs, so we will ignore the URB_NO_INTERRUPT |
| * flag setting. */ |
| td->status |= cpu_to_le32(TD_CTRL_IOC); |
| |
| qh = uhci_alloc_qh(uhci); |
| if (!qh) |
| return -ENOMEM; |
| |
| urbp->qh = qh; |
| qh->urbp = urbp; |
| |
| /* Always breadth first */ |
| uhci_insert_tds_in_qh(qh, urb, UHCI_PTR_BREADTH); |
| |
| if (eurb) |
| uhci_append_queued_urb(uhci, eurb, urb); |
| else |
| uhci_insert_qh(uhci, skelqh, urb); |
| |
| return -EINPROGRESS; |
| } |
| |
| /* |
| * Common result for bulk and interrupt |
| */ |
| static int uhci_result_common(struct uhci_hcd *uhci, struct urb *urb) |
| { |
| struct urb_priv *urbp = urb->hcpriv; |
| struct uhci_td *td; |
| unsigned int status = 0; |
| int ret = 0; |
| |
| urb->actual_length = 0; |
| |
| list_for_each_entry(td, &urbp->td_list, list) { |
| unsigned int ctrlstat = td_status(td); |
| |
| status = uhci_status_bits(ctrlstat); |
| if (status & TD_CTRL_ACTIVE) |
| return -EINPROGRESS; |
| |
| urb->actual_length += uhci_actual_length(ctrlstat); |
| |
| if (status) |
| goto td_error; |
| |
| if (uhci_actual_length(ctrlstat) < |
| uhci_expected_length(td_token(td))) { |
| if (urb->transfer_flags & URB_SHORT_NOT_OK) { |
| ret = -EREMOTEIO; |
| goto err; |
| } else |
| return 0; |
| } |
| } |
| |
| return 0; |
| |
| td_error: |
| ret = uhci_map_status(status, uhci_packetout(td_token(td))); |
| |
| err: |
| /* |
| * Enable this chunk of code if you want to see some more debugging. |
| * But be careful, it has the tendancy to starve out khubd and prevent |
| * disconnects from happening successfully if you have a slow debug |
| * log interface (like a serial console. |
| */ |
| #if 0 |
| if ((debug == 1 && ret != -EPIPE) || debug > 1) { |
| /* Some debugging code */ |
| dev_dbg(uhci_dev(uhci), "%s: failed with status %x\n", |
| __FUNCTION__, status); |
| |
| if (errbuf) { |
| /* Print the chain for debugging purposes */ |
| uhci_show_qh(urbp->qh, errbuf, ERRBUF_LEN, 0); |
| |
| lprintk(errbuf); |
| } |
| } |
| #endif |
| return ret; |
| } |
| |
| static inline int uhci_submit_bulk(struct uhci_hcd *uhci, struct urb *urb, struct urb *eurb) |
| { |
| int ret; |
| |
| /* Can't have low-speed bulk transfers */ |
| if (urb->dev->speed == USB_SPEED_LOW) |
| return -EINVAL; |
| |
| ret = uhci_submit_common(uhci, urb, eurb, uhci->skel_bulk_qh); |
| if (ret == -EINPROGRESS) |
| uhci_inc_fsbr(uhci, urb); |
| |
| return ret; |
| } |
| |
| static inline int uhci_submit_interrupt(struct uhci_hcd *uhci, struct urb *urb, struct urb *eurb) |
| { |
| /* USB 1.1 interrupt transfers only involve one packet per interval; |
| * that's the uhci_submit_common() "breadth first" policy. Drivers |
| * can submit urbs of any length, but longer ones might need many |
| * intervals to complete. |
| */ |
| return uhci_submit_common(uhci, urb, eurb, uhci->skelqh[__interval_to_skel(urb->interval)]); |
| } |
| |
| /* |
| * Isochronous transfers |
| */ |
| static int isochronous_find_limits(struct uhci_hcd *uhci, struct urb *urb, unsigned int *start, unsigned int *end) |
| { |
| struct urb *last_urb = NULL; |
| struct urb_priv *up; |
| int ret = 0; |
| |
| list_for_each_entry(up, &uhci->urb_list, urb_list) { |
| struct urb *u = up->urb; |
| |
| /* look for pending URB's with identical pipe handle */ |
| if ((urb->pipe == u->pipe) && (urb->dev == u->dev) && |
| (u->status == -EINPROGRESS) && (u != urb)) { |
| if (!last_urb) |
| *start = u->start_frame; |
| last_urb = u; |
| } |
| } |
| |
| if (last_urb) { |
| *end = (last_urb->start_frame + last_urb->number_of_packets * |
| last_urb->interval) & (UHCI_NUMFRAMES-1); |
| ret = 0; |
| } else |
| ret = -1; /* no previous urb found */ |
| |
| return ret; |
| } |
| |
| static int isochronous_find_start(struct uhci_hcd *uhci, struct urb *urb) |
| { |
| int limits; |
| unsigned int start = 0, end = 0; |
| |
| if (urb->number_of_packets > 900) /* 900? Why? */ |
| return -EFBIG; |
| |
| limits = isochronous_find_limits(uhci, urb, &start, &end); |
| |
| if (urb->transfer_flags & URB_ISO_ASAP) { |
| if (limits) { |
| uhci_get_current_frame_number(uhci); |
| urb->start_frame = (uhci->frame_number + 10) |
| & (UHCI_NUMFRAMES - 1); |
| } else |
| urb->start_frame = end; |
| } else { |
| urb->start_frame &= (UHCI_NUMFRAMES - 1); |
| /* FIXME: Sanity check */ |
| } |
| |
| return 0; |
| } |
| |
| /* |
| * Isochronous transfers |
| */ |
| static int uhci_submit_isochronous(struct uhci_hcd *uhci, struct urb *urb) |
| { |
| struct uhci_td *td; |
| int i, ret, frame; |
| int status, destination; |
| |
| status = TD_CTRL_ACTIVE | TD_CTRL_IOS; |
| destination = (urb->pipe & PIPE_DEVEP_MASK) | usb_packetid(urb->pipe); |
| |
| ret = isochronous_find_start(uhci, urb); |
| if (ret) |
| return ret; |
| |
| frame = urb->start_frame; |
| for (i = 0; i < urb->number_of_packets; i++, frame += urb->interval) { |
| if (!urb->iso_frame_desc[i].length) |
| continue; |
| |
| td = uhci_alloc_td(uhci); |
| if (!td) |
| return -ENOMEM; |
| |
| uhci_add_td_to_urb(urb, td); |
| uhci_fill_td(td, status, destination | uhci_explen(urb->iso_frame_desc[i].length - 1), |
| urb->transfer_dma + urb->iso_frame_desc[i].offset); |
| |
| if (i + 1 >= urb->number_of_packets) |
| td->status |= cpu_to_le32(TD_CTRL_IOC); |
| |
| uhci_insert_td_frame_list(uhci, td, frame); |
| } |
| |
| return -EINPROGRESS; |
| } |
| |
| static int uhci_result_isochronous(struct uhci_hcd *uhci, struct urb *urb) |
| { |
| struct uhci_td *td; |
| struct urb_priv *urbp = (struct urb_priv *)urb->hcpriv; |
| int status; |
| int i, ret = 0; |
| |
| urb->actual_length = 0; |
| |
| i = 0; |
| list_for_each_entry(td, &urbp->td_list, list) { |
| int actlength; |
| unsigned int ctrlstat = td_status(td); |
| |
| if (ctrlstat & TD_CTRL_ACTIVE) |
| return -EINPROGRESS; |
| |
| actlength = uhci_actual_length(ctrlstat); |
| urb->iso_frame_desc[i].actual_length = actlength; |
| urb->actual_length += actlength; |
| |
| status = uhci_map_status(uhci_status_bits(ctrlstat), |
| usb_pipeout(urb->pipe)); |
| urb->iso_frame_desc[i].status = status; |
| if (status) { |
| urb->error_count++; |
| ret = status; |
| } |
| |
| i++; |
| } |
| |
| return ret; |
| } |
| |
| static struct urb *uhci_find_urb_ep(struct uhci_hcd *uhci, struct urb *urb) |
| { |
| struct urb_priv *up; |
| |
| /* We don't match Isoc transfers since they are special */ |
| if (usb_pipeisoc(urb->pipe)) |
| return NULL; |
| |
| list_for_each_entry(up, &uhci->urb_list, urb_list) { |
| struct urb *u = up->urb; |
| |
| if (u->dev == urb->dev && u->status == -EINPROGRESS) { |
| /* For control, ignore the direction */ |
| if (usb_pipecontrol(urb->pipe) && |
| (u->pipe & ~USB_DIR_IN) == (urb->pipe & ~USB_DIR_IN)) |
| return u; |
| else if (u->pipe == urb->pipe) |
| return u; |
| } |
| } |
| |
| return NULL; |
| } |
| |
| static int uhci_urb_enqueue(struct usb_hcd *hcd, |
| struct usb_host_endpoint *ep, |
| struct urb *urb, unsigned mem_flags) |
| { |
| int ret; |
| struct uhci_hcd *uhci = hcd_to_uhci(hcd); |
| unsigned long flags; |
| struct urb *eurb; |
| int bustime; |
| |
| spin_lock_irqsave(&uhci->lock, flags); |
| |
| ret = urb->status; |
| if (ret != -EINPROGRESS) /* URB already unlinked! */ |
| goto out; |
| |
| eurb = uhci_find_urb_ep(uhci, urb); |
| |
| if (!uhci_alloc_urb_priv(uhci, urb)) { |
| ret = -ENOMEM; |
| goto out; |
| } |
| |
| switch (usb_pipetype(urb->pipe)) { |
| case PIPE_CONTROL: |
| ret = uhci_submit_control(uhci, urb, eurb); |
| break; |
| case PIPE_INTERRUPT: |
| if (!eurb) { |
| bustime = usb_check_bandwidth(urb->dev, urb); |
| if (bustime < 0) |
| ret = bustime; |
| else { |
| ret = uhci_submit_interrupt(uhci, urb, eurb); |
| if (ret == -EINPROGRESS) |
| usb_claim_bandwidth(urb->dev, urb, bustime, 0); |
| } |
| } else { /* inherit from parent */ |
| urb->bandwidth = eurb->bandwidth; |
| ret = uhci_submit_interrupt(uhci, urb, eurb); |
| } |
| break; |
| case PIPE_BULK: |
| ret = uhci_submit_bulk(uhci, urb, eurb); |
| break; |
| case PIPE_ISOCHRONOUS: |
| bustime = usb_check_bandwidth(urb->dev, urb); |
| if (bustime < 0) { |
| ret = bustime; |
| break; |
| } |
| |
| ret = uhci_submit_isochronous(uhci, urb); |
| if (ret == -EINPROGRESS) |
| usb_claim_bandwidth(urb->dev, urb, bustime, 1); |
| break; |
| } |
| |
| if (ret != -EINPROGRESS) { |
| /* Submit failed, so delete it from the urb_list */ |
| struct urb_priv *urbp = urb->hcpriv; |
| |
| list_del_init(&urbp->urb_list); |
| uhci_destroy_urb_priv(uhci, urb); |
| } else |
| ret = 0; |
| |
| out: |
| spin_unlock_irqrestore(&uhci->lock, flags); |
| return ret; |
| } |
| |
| /* |
| * Return the result of a transfer |
| */ |
| static void uhci_transfer_result(struct uhci_hcd *uhci, struct urb *urb) |
| { |
| int ret = -EINPROGRESS; |
| struct urb_priv *urbp; |
| |
| spin_lock(&urb->lock); |
| |
| urbp = (struct urb_priv *)urb->hcpriv; |
| |
| if (urb->status != -EINPROGRESS) /* URB already dequeued */ |
| goto out; |
| |
| switch (usb_pipetype(urb->pipe)) { |
| case PIPE_CONTROL: |
| ret = uhci_result_control(uhci, urb); |
| break; |
| case PIPE_BULK: |
| case PIPE_INTERRUPT: |
| ret = uhci_result_common(uhci, urb); |
| break; |
| case PIPE_ISOCHRONOUS: |
| ret = uhci_result_isochronous(uhci, urb); |
| break; |
| } |
| |
| if (ret == -EINPROGRESS) |
| goto out; |
| urb->status = ret; |
| |
| switch (usb_pipetype(urb->pipe)) { |
| case PIPE_CONTROL: |
| case PIPE_BULK: |
| case PIPE_ISOCHRONOUS: |
| /* Release bandwidth for Interrupt or Isoc. transfers */ |
| if (urb->bandwidth) |
| usb_release_bandwidth(urb->dev, urb, 1); |
| uhci_unlink_generic(uhci, urb); |
| break; |
| case PIPE_INTERRUPT: |
| /* Release bandwidth for Interrupt or Isoc. transfers */ |
| /* Make sure we don't release if we have a queued URB */ |
| if (list_empty(&urbp->queue_list) && urb->bandwidth) |
| usb_release_bandwidth(urb->dev, urb, 0); |
| else |
| /* bandwidth was passed on to queued URB, */ |
| /* so don't let usb_unlink_urb() release it */ |
| urb->bandwidth = 0; |
| uhci_unlink_generic(uhci, urb); |
| break; |
| default: |
| dev_info(uhci_dev(uhci), "%s: unknown pipe type %d " |
| "for urb %p\n", |
| __FUNCTION__, usb_pipetype(urb->pipe), urb); |
| } |
| |
| /* Move it from uhci->urb_list to uhci->complete_list */ |
| uhci_moveto_complete(uhci, urbp); |
| |
| out: |
| spin_unlock(&urb->lock); |
| } |
| |
| static void uhci_unlink_generic(struct uhci_hcd *uhci, struct urb *urb) |
| { |
| struct list_head *head; |
| struct uhci_td *td; |
| struct urb_priv *urbp = (struct urb_priv *)urb->hcpriv; |
| int prevactive = 0; |
| |
| uhci_dec_fsbr(uhci, urb); /* Safe since it checks */ |
| |
| /* |
| * Now we need to find out what the last successful toggle was |
| * so we can update the local data toggle for the next transfer |
| * |
| * There are 2 ways the last successful completed TD is found: |
| * |
| * 1) The TD is NOT active and the actual length < expected length |
| * 2) The TD is NOT active and it's the last TD in the chain |
| * |
| * and a third way the first uncompleted TD is found: |
| * |
| * 3) The TD is active and the previous TD is NOT active |
| * |
| * Control and Isochronous ignore the toggle, so this is safe |
| * for all types |
| * |
| * FIXME: The toggle fixups won't be 100% reliable until we |
| * change over to using a single queue for each endpoint and |
| * stop the queue before unlinking. |
| */ |
| head = &urbp->td_list; |
| list_for_each_entry(td, head, list) { |
| unsigned int ctrlstat = td_status(td); |
| |
| if (!(ctrlstat & TD_CTRL_ACTIVE) && |
| (uhci_actual_length(ctrlstat) < |
| uhci_expected_length(td_token(td)) || |
| td->list.next == head)) |
| usb_settoggle(urb->dev, uhci_endpoint(td_token(td)), |
| uhci_packetout(td_token(td)), |
| uhci_toggle(td_token(td)) ^ 1); |
| else if ((ctrlstat & TD_CTRL_ACTIVE) && !prevactive) |
| usb_settoggle(urb->dev, uhci_endpoint(td_token(td)), |
| uhci_packetout(td_token(td)), |
| uhci_toggle(td_token(td))); |
| |
| prevactive = ctrlstat & TD_CTRL_ACTIVE; |
| } |
| |
| uhci_delete_queued_urb(uhci, urb); |
| |
| /* The interrupt loop will reclaim the QH's */ |
| uhci_remove_qh(uhci, urbp->qh); |
| urbp->qh = NULL; |
| } |
| |
| static int uhci_urb_dequeue(struct usb_hcd *hcd, struct urb *urb) |
| { |
| struct uhci_hcd *uhci = hcd_to_uhci(hcd); |
| unsigned long flags; |
| struct urb_priv *urbp; |
| |
| spin_lock_irqsave(&uhci->lock, flags); |
| urbp = urb->hcpriv; |
| if (!urbp) /* URB was never linked! */ |
| goto done; |
| list_del_init(&urbp->urb_list); |
| |
| uhci_unlink_generic(uhci, urb); |
| |
| uhci_get_current_frame_number(uhci); |
| if (uhci->frame_number + uhci->is_stopped != uhci->urb_remove_age) { |
| uhci_remove_pending_urbps(uhci); |
| uhci->urb_remove_age = uhci->frame_number; |
| } |
| |
| /* If we're the first, set the next interrupt bit */ |
| if (list_empty(&uhci->urb_remove_list)) |
| uhci_set_next_interrupt(uhci); |
| list_add_tail(&urbp->urb_list, &uhci->urb_remove_list); |
| |
| done: |
| spin_unlock_irqrestore(&uhci->lock, flags); |
| return 0; |
| } |
| |
| static int uhci_fsbr_timeout(struct uhci_hcd *uhci, struct urb *urb) |
| { |
| struct urb_priv *urbp = (struct urb_priv *)urb->hcpriv; |
| struct list_head *head; |
| struct uhci_td *td; |
| int count = 0; |
| |
| uhci_dec_fsbr(uhci, urb); |
| |
| urbp->fsbr_timeout = 1; |
| |
| /* |
| * Ideally we would want to fix qh->element as well, but it's |
| * read/write by the HC, so that can introduce a race. It's not |
| * really worth the hassle |
| */ |
| |
| head = &urbp->td_list; |
| list_for_each_entry(td, head, list) { |
| /* |
| * Make sure we don't do the last one (since it'll have the |
| * TERM bit set) as well as we skip every so many TD's to |
| * make sure it doesn't hog the bandwidth |
| */ |
| if (td->list.next != head && (count % DEPTH_INTERVAL) == |
| (DEPTH_INTERVAL - 1)) |
| td->link |= UHCI_PTR_DEPTH; |
| |
| count++; |
| } |
| |
| return 0; |
| } |
| |
| static void uhci_free_pending_qhs(struct uhci_hcd *uhci) |
| { |
| struct uhci_qh *qh, *tmp; |
| |
| list_for_each_entry_safe(qh, tmp, &uhci->qh_remove_list, remove_list) { |
| list_del_init(&qh->remove_list); |
| |
| uhci_free_qh(uhci, qh); |
| } |
| } |
| |
| static void uhci_free_pending_tds(struct uhci_hcd *uhci) |
| { |
| struct uhci_td *td, *tmp; |
| |
| list_for_each_entry_safe(td, tmp, &uhci->td_remove_list, remove_list) { |
| list_del_init(&td->remove_list); |
| |
| uhci_free_td(uhci, td); |
| } |
| } |
| |
| static void |
| uhci_finish_urb(struct usb_hcd *hcd, struct urb *urb, struct pt_regs *regs) |
| __releases(uhci->lock) |
| __acquires(uhci->lock) |
| { |
| struct uhci_hcd *uhci = hcd_to_uhci(hcd); |
| |
| uhci_destroy_urb_priv(uhci, urb); |
| |
| spin_unlock(&uhci->lock); |
| usb_hcd_giveback_urb(hcd, urb, regs); |
| spin_lock(&uhci->lock); |
| } |
| |
| static void uhci_finish_completion(struct uhci_hcd *uhci, struct pt_regs *regs) |
| { |
| struct urb_priv *urbp, *tmp; |
| |
| list_for_each_entry_safe(urbp, tmp, &uhci->complete_list, urb_list) { |
| struct urb *urb = urbp->urb; |
| |
| list_del_init(&urbp->urb_list); |
| uhci_finish_urb(uhci_to_hcd(uhci), urb, regs); |
| } |
| } |
| |
| static void uhci_remove_pending_urbps(struct uhci_hcd *uhci) |
| { |
| |
| /* Splice the urb_remove_list onto the end of the complete_list */ |
| list_splice_init(&uhci->urb_remove_list, uhci->complete_list.prev); |
| } |
| |
| /* Process events in the schedule, but only in one thread at a time */ |
| static void uhci_scan_schedule(struct uhci_hcd *uhci, struct pt_regs *regs) |
| { |
| struct urb_priv *urbp, *tmp; |
| |
| /* Don't allow re-entrant calls */ |
| if (uhci->scan_in_progress) { |
| uhci->need_rescan = 1; |
| return; |
| } |
| uhci->scan_in_progress = 1; |
| rescan: |
| uhci->need_rescan = 0; |
| |
| uhci_clear_next_interrupt(uhci); |
| uhci_get_current_frame_number(uhci); |
| |
| if (uhci->frame_number + uhci->is_stopped != uhci->qh_remove_age) |
| uhci_free_pending_qhs(uhci); |
| if (uhci->frame_number + uhci->is_stopped != uhci->td_remove_age) |
| uhci_free_pending_tds(uhci); |
| if (uhci->frame_number + uhci->is_stopped != uhci->urb_remove_age) |
| uhci_remove_pending_urbps(uhci); |
| |
| /* Walk the list of pending URBs to see which ones completed |
| * (must be _safe because uhci_transfer_result() dequeues URBs) */ |
| list_for_each_entry_safe(urbp, tmp, &uhci->urb_list, urb_list) { |
| struct urb *urb = urbp->urb; |
| |
| /* Checks the status and does all of the magic necessary */ |
| uhci_transfer_result(uhci, urb); |
| } |
| uhci_finish_completion(uhci, regs); |
| |
| /* If the controller is stopped, we can finish these off right now */ |
| if (uhci->is_stopped) { |
| uhci_free_pending_qhs(uhci); |
| uhci_free_pending_tds(uhci); |
| uhci_remove_pending_urbps(uhci); |
| } |
| |
| if (uhci->need_rescan) |
| goto rescan; |
| uhci->scan_in_progress = 0; |
| |
| if (list_empty(&uhci->urb_remove_list) && |
| list_empty(&uhci->td_remove_list) && |
| list_empty(&uhci->qh_remove_list)) |
| uhci_clear_next_interrupt(uhci); |
| else |
| uhci_set_next_interrupt(uhci); |
| |
| /* Wake up anyone waiting for an URB to complete */ |
| wake_up_all(&uhci->waitqh); |
| } |
| |
| static void check_fsbr(struct uhci_hcd *uhci) |
| { |
| struct urb_priv *up; |
| |
| list_for_each_entry(up, &uhci->urb_list, urb_list) { |
| struct urb *u = up->urb; |
| |
| spin_lock(&u->lock); |
| |
| /* Check if the FSBR timed out */ |
| if (up->fsbr && !up->fsbr_timeout && time_after_eq(jiffies, up->fsbrtime + IDLE_TIMEOUT)) |
| uhci_fsbr_timeout(uhci, u); |
| |
| spin_unlock(&u->lock); |
| } |
| |
| /* Really disable FSBR */ |
| if (!uhci->fsbr && uhci->fsbrtimeout && time_after_eq(jiffies, uhci->fsbrtimeout)) { |
| uhci->fsbrtimeout = 0; |
| uhci->skel_term_qh->link = UHCI_PTR_TERM; |
| } |
| } |