| /****************************************************************************** |
| * |
| * This file is provided under a dual BSD/GPLv2 license. When using or |
| * redistributing this file, you may do so under either license. |
| * |
| * GPL LICENSE SUMMARY |
| * |
| * Copyright(c) 2008 - 2012 Intel Corporation. All rights reserved. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of version 2 of the GNU General Public License as |
| * published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, but |
| * WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU |
| * General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110, |
| * USA |
| * |
| * The full GNU General Public License is included in this distribution |
| * in the file called LICENSE.GPL. |
| * |
| * Contact Information: |
| * Intel Linux Wireless <ilw@linux.intel.com> |
| * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 |
| * |
| * BSD LICENSE |
| * |
| * Copyright(c) 2005 - 2012 Intel Corporation. All rights reserved. |
| * All rights reserved. |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions |
| * are met: |
| * |
| * * Redistributions of source code must retain the above copyright |
| * notice, this list of conditions and the following disclaimer. |
| * * Redistributions in binary form must reproduce the above copyright |
| * notice, this list of conditions and the following disclaimer in |
| * the documentation and/or other materials provided with the |
| * distribution. |
| * * Neither the name Intel Corporation nor the names of its |
| * contributors may be used to endorse or promote products derived |
| * from this software without specific prior written permission. |
| * |
| * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS |
| * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT |
| * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR |
| * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT |
| * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, |
| * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT |
| * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, |
| * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY |
| * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT |
| * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE |
| * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
| *****************************************************************************/ |
| #ifndef __iwl_eeprom_parse_h__ |
| #define __iwl_eeprom_parse_h__ |
| |
| #include <linux/types.h> |
| #include <linux/if_ether.h> |
| #include "iwl-trans.h" |
| |
| /* SKU Capabilities (actual values from EEPROM definition) */ |
| #define EEPROM_SKU_CAP_BAND_24GHZ (1 << 4) |
| #define EEPROM_SKU_CAP_BAND_52GHZ (1 << 5) |
| #define EEPROM_SKU_CAP_11N_ENABLE (1 << 6) |
| #define EEPROM_SKU_CAP_AMT_ENABLE (1 << 7) |
| #define EEPROM_SKU_CAP_IPAN_ENABLE (1 << 8) |
| |
| /* radio config bits (actual values from EEPROM definition) */ |
| #define EEPROM_RF_CFG_TYPE_MSK(x) (x & 0x3) /* bits 0-1 */ |
| #define EEPROM_RF_CFG_STEP_MSK(x) ((x >> 2) & 0x3) /* bits 2-3 */ |
| #define EEPROM_RF_CFG_DASH_MSK(x) ((x >> 4) & 0x3) /* bits 4-5 */ |
| #define EEPROM_RF_CFG_PNUM_MSK(x) ((x >> 6) & 0x3) /* bits 6-7 */ |
| #define EEPROM_RF_CFG_TX_ANT_MSK(x) ((x >> 8) & 0xF) /* bits 8-11 */ |
| #define EEPROM_RF_CFG_RX_ANT_MSK(x) ((x >> 12) & 0xF) /* bits 12-15 */ |
| |
| struct iwl_eeprom_data { |
| int n_hw_addrs; |
| u8 hw_addr[ETH_ALEN]; |
| |
| u16 radio_config; |
| |
| u8 calib_version; |
| __le16 calib_voltage; |
| |
| __le16 raw_temperature; |
| __le16 kelvin_temperature; |
| __le16 kelvin_voltage; |
| __le16 xtal_calib[2]; |
| |
| u16 sku; |
| u16 radio_cfg; |
| u16 eeprom_version; |
| s8 max_tx_pwr_half_dbm; |
| |
| u8 valid_tx_ant, valid_rx_ant; |
| |
| struct ieee80211_supported_band bands[IEEE80211_NUM_BANDS]; |
| struct ieee80211_channel channels[]; |
| }; |
| |
| /** |
| * iwl_parse_eeprom_data - parse EEPROM data and return values |
| * |
| * @dev: device pointer we're parsing for, for debug only |
| * @cfg: device configuration for parsing and overrides |
| * @eeprom: the EEPROM data |
| * @eeprom_size: length of the EEPROM data |
| * |
| * This function parses all EEPROM values we need and then |
| * returns a (newly allocated) struct containing all the |
| * relevant values for driver use. The struct must be freed |
| * later with iwl_free_eeprom_data(). |
| */ |
| struct iwl_eeprom_data * |
| iwl_parse_eeprom_data(struct device *dev, const struct iwl_cfg *cfg, |
| const u8 *eeprom, size_t eeprom_size); |
| |
| /** |
| * iwl_free_eeprom_data - free EEPROM data |
| * @data: the data to free |
| */ |
| static inline void iwl_free_eeprom_data(struct iwl_eeprom_data *data) |
| { |
| kfree(data); |
| } |
| |
| int iwl_eeprom_check_version(struct iwl_eeprom_data *data, |
| struct iwl_trans *trans); |
| |
| #endif /* __iwl_eeprom_parse_h__ */ |