| /* linux/include/asm-arm/arch-s3c2410/dma.h |
| * |
| * Copyright (C) 2003,2004,2006 Simtec Electronics |
| * Ben Dooks <ben@simtec.co.uk> |
| * |
| * Samsung S3C241XX DMA support |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| */ |
| |
| #ifndef __ASM_ARCH_DMA_H |
| #define __ASM_ARCH_DMA_H __FILE__ |
| |
| #include <linux/sysdev.h> |
| #include <asm/arch/hardware.h> |
| |
| /* |
| * This is the maximum DMA address(physical address) that can be DMAd to. |
| * |
| */ |
| #define MAX_DMA_ADDRESS 0x40000000 |
| #define MAX_DMA_TRANSFER_SIZE 0x100000 /* Data Unit is half word */ |
| |
| /* We use `virtual` dma channels to hide the fact we have only a limited |
| * number of DMA channels, and not of all of them (dependant on the device) |
| * can be attached to any DMA source. We therefore let the DMA core handle |
| * the allocation of hardware channels to clients. |
| */ |
| |
| enum dma_ch { |
| DMACH_XD0, |
| DMACH_XD1, |
| DMACH_SDI, |
| DMACH_SPI0, |
| DMACH_SPI1, |
| DMACH_UART0, |
| DMACH_UART1, |
| DMACH_UART2, |
| DMACH_TIMER, |
| DMACH_I2S_IN, |
| DMACH_I2S_OUT, |
| DMACH_PCM_IN, |
| DMACH_PCM_OUT, |
| DMACH_MIC_IN, |
| DMACH_USB_EP1, |
| DMACH_USB_EP2, |
| DMACH_USB_EP3, |
| DMACH_USB_EP4, |
| DMACH_UART0_SRC2, /* s3c2412 second uart sources */ |
| DMACH_UART1_SRC2, |
| DMACH_UART2_SRC2, |
| DMACH_UART3, /* s3c2443 has extra uart */ |
| DMACH_UART3_SRC2, |
| DMACH_MAX, /* the end entry */ |
| }; |
| |
| #define DMACH_LOW_LEVEL (1<<28) /* use this to specifiy hardware ch no */ |
| |
| /* we have 4 dma channels */ |
| #ifndef CONFIG_CPU_S3C2443 |
| #define S3C2410_DMA_CHANNELS (4) |
| #else |
| #define S3C2410_DMA_CHANNELS (6) |
| #endif |
| |
| /* types */ |
| |
| enum s3c2410_dma_state { |
| S3C2410_DMA_IDLE, |
| S3C2410_DMA_RUNNING, |
| S3C2410_DMA_PAUSED |
| }; |
| |
| |
| /* enum s3c2410_dma_loadst |
| * |
| * This represents the state of the DMA engine, wrt to the loaded / running |
| * transfers. Since we don't have any way of knowing exactly the state of |
| * the DMA transfers, we need to know the state to make decisions on wether |
| * we can |
| * |
| * S3C2410_DMA_NONE |
| * |
| * There are no buffers loaded (the channel should be inactive) |
| * |
| * S3C2410_DMA_1LOADED |
| * |
| * There is one buffer loaded, however it has not been confirmed to be |
| * loaded by the DMA engine. This may be because the channel is not |
| * yet running, or the DMA driver decided that it was too costly to |
| * sit and wait for it to happen. |
| * |
| * S3C2410_DMA_1RUNNING |
| * |
| * The buffer has been confirmed running, and not finisged |
| * |
| * S3C2410_DMA_1LOADED_1RUNNING |
| * |
| * There is a buffer waiting to be loaded by the DMA engine, and one |
| * currently running. |
| */ |
| |
| enum s3c2410_dma_loadst { |
| S3C2410_DMALOAD_NONE, |
| S3C2410_DMALOAD_1LOADED, |
| S3C2410_DMALOAD_1RUNNING, |
| S3C2410_DMALOAD_1LOADED_1RUNNING, |
| }; |
| |
| enum s3c2410_dma_buffresult { |
| S3C2410_RES_OK, |
| S3C2410_RES_ERR, |
| S3C2410_RES_ABORT |
| }; |
| |
| enum s3c2410_dmasrc { |
| S3C2410_DMASRC_HW, /* source is memory */ |
| S3C2410_DMASRC_MEM /* source is hardware */ |
| }; |
| |
| /* enum s3c2410_chan_op |
| * |
| * operation codes passed to the DMA code by the user, and also used |
| * to inform the current channel owner of any changes to the system state |
| */ |
| |
| enum s3c2410_chan_op { |
| S3C2410_DMAOP_START, |
| S3C2410_DMAOP_STOP, |
| S3C2410_DMAOP_PAUSE, |
| S3C2410_DMAOP_RESUME, |
| S3C2410_DMAOP_FLUSH, |
| S3C2410_DMAOP_TIMEOUT, /* internal signal to handler */ |
| S3C2410_DMAOP_STARTED, /* indicate channel started */ |
| }; |
| |
| /* flags */ |
| |
| #define S3C2410_DMAF_SLOW (1<<0) /* slow, so don't worry about |
| * waiting for reloads */ |
| #define S3C2410_DMAF_AUTOSTART (1<<1) /* auto-start if buffer queued */ |
| |
| /* dma buffer */ |
| |
| struct s3c2410_dma_client { |
| char *name; |
| }; |
| |
| /* s3c2410_dma_buf_s |
| * |
| * internally used buffer structure to describe a queued or running |
| * buffer. |
| */ |
| |
| struct s3c2410_dma_buf; |
| struct s3c2410_dma_buf { |
| struct s3c2410_dma_buf *next; |
| int magic; /* magic */ |
| int size; /* buffer size in bytes */ |
| dma_addr_t data; /* start of DMA data */ |
| dma_addr_t ptr; /* where the DMA got to [1] */ |
| void *id; /* client's id */ |
| }; |
| |
| /* [1] is this updated for both recv/send modes? */ |
| |
| struct s3c2410_dma_chan; |
| |
| /* s3c2410_dma_cbfn_t |
| * |
| * buffer callback routine type |
| */ |
| |
| typedef void (*s3c2410_dma_cbfn_t)(struct s3c2410_dma_chan *, |
| void *buf, int size, |
| enum s3c2410_dma_buffresult result); |
| |
| typedef int (*s3c2410_dma_opfn_t)(struct s3c2410_dma_chan *, |
| enum s3c2410_chan_op ); |
| |
| struct s3c2410_dma_stats { |
| unsigned long loads; |
| unsigned long timeout_longest; |
| unsigned long timeout_shortest; |
| unsigned long timeout_avg; |
| unsigned long timeout_failed; |
| }; |
| |
| struct s3c2410_dma_map; |
| |
| /* struct s3c2410_dma_chan |
| * |
| * full state information for each DMA channel |
| */ |
| |
| struct s3c2410_dma_chan { |
| /* channel state flags and information */ |
| unsigned char number; /* number of this dma channel */ |
| unsigned char in_use; /* channel allocated */ |
| unsigned char irq_claimed; /* irq claimed for channel */ |
| unsigned char irq_enabled; /* irq enabled for channel */ |
| unsigned char xfer_unit; /* size of an transfer */ |
| |
| /* channel state */ |
| |
| enum s3c2410_dma_state state; |
| enum s3c2410_dma_loadst load_state; |
| struct s3c2410_dma_client *client; |
| |
| /* channel configuration */ |
| enum s3c2410_dmasrc source; |
| unsigned long dev_addr; |
| unsigned long load_timeout; |
| unsigned int flags; /* channel flags */ |
| unsigned int hw_cfg; /* last hw config */ |
| |
| struct s3c24xx_dma_map *map; /* channel hw maps */ |
| |
| /* channel's hardware position and configuration */ |
| void __iomem *regs; /* channels registers */ |
| void __iomem *addr_reg; /* data address register */ |
| unsigned int irq; /* channel irq */ |
| unsigned long dcon; /* default value of DCON */ |
| |
| /* driver handles */ |
| s3c2410_dma_cbfn_t callback_fn; /* buffer done callback */ |
| s3c2410_dma_opfn_t op_fn; /* channel op callback */ |
| |
| /* stats gathering */ |
| struct s3c2410_dma_stats *stats; |
| struct s3c2410_dma_stats stats_store; |
| |
| /* buffer list and information */ |
| struct s3c2410_dma_buf *curr; /* current dma buffer */ |
| struct s3c2410_dma_buf *next; /* next buffer to load */ |
| struct s3c2410_dma_buf *end; /* end of queue */ |
| |
| /* system device */ |
| struct sys_device dev; |
| }; |
| |
| /* the currently allocated channel information */ |
| extern struct s3c2410_dma_chan s3c2410_chans[]; |
| |
| /* note, we don't really use dma_device_t at the moment */ |
| typedef unsigned long dma_device_t; |
| |
| /* functions --------------------------------------------------------------- */ |
| |
| /* s3c2410_dma_request |
| * |
| * request a dma channel exclusivley |
| */ |
| |
| extern int s3c2410_dma_request(dmach_t channel, |
| struct s3c2410_dma_client *, void *dev); |
| |
| |
| /* s3c2410_dma_ctrl |
| * |
| * change the state of the dma channel |
| */ |
| |
| extern int s3c2410_dma_ctrl(dmach_t channel, enum s3c2410_chan_op op); |
| |
| /* s3c2410_dma_setflags |
| * |
| * set the channel's flags to a given state |
| */ |
| |
| extern int s3c2410_dma_setflags(dmach_t channel, |
| unsigned int flags); |
| |
| /* s3c2410_dma_free |
| * |
| * free the dma channel (will also abort any outstanding operations) |
| */ |
| |
| extern int s3c2410_dma_free(dmach_t channel, struct s3c2410_dma_client *); |
| |
| /* s3c2410_dma_enqueue |
| * |
| * place the given buffer onto the queue of operations for the channel. |
| * The buffer must be allocated from dma coherent memory, or the Dcache/WB |
| * drained before the buffer is given to the DMA system. |
| */ |
| |
| extern int s3c2410_dma_enqueue(dmach_t channel, void *id, |
| dma_addr_t data, int size); |
| |
| /* s3c2410_dma_config |
| * |
| * configure the dma channel |
| */ |
| |
| extern int s3c2410_dma_config(dmach_t channel, int xferunit, int dcon); |
| |
| /* s3c2410_dma_devconfig |
| * |
| * configure the device we're talking to |
| */ |
| |
| extern int s3c2410_dma_devconfig(int channel, enum s3c2410_dmasrc source, |
| int hwcfg, unsigned long devaddr); |
| |
| /* s3c2410_dma_getposition |
| * |
| * get the position that the dma transfer is currently at |
| */ |
| |
| extern int s3c2410_dma_getposition(dmach_t channel, |
| dma_addr_t *src, dma_addr_t *dest); |
| |
| extern int s3c2410_dma_set_opfn(dmach_t, s3c2410_dma_opfn_t rtn); |
| extern int s3c2410_dma_set_buffdone_fn(dmach_t, s3c2410_dma_cbfn_t rtn); |
| |
| /* DMA Register definitions */ |
| |
| #define S3C2410_DMA_DISRC (0x00) |
| #define S3C2410_DMA_DISRCC (0x04) |
| #define S3C2410_DMA_DIDST (0x08) |
| #define S3C2410_DMA_DIDSTC (0x0C) |
| #define S3C2410_DMA_DCON (0x10) |
| #define S3C2410_DMA_DSTAT (0x14) |
| #define S3C2410_DMA_DCSRC (0x18) |
| #define S3C2410_DMA_DCDST (0x1C) |
| #define S3C2410_DMA_DMASKTRIG (0x20) |
| #define S3C2412_DMA_DMAREQSEL (0x24) |
| #define S3C2443_DMA_DMAREQSEL (0x24) |
| |
| #define S3C2410_DISRCC_INC (1<<0) |
| #define S3C2410_DISRCC_APB (1<<1) |
| |
| #define S3C2410_DMASKTRIG_STOP (1<<2) |
| #define S3C2410_DMASKTRIG_ON (1<<1) |
| #define S3C2410_DMASKTRIG_SWTRIG (1<<0) |
| |
| #define S3C2410_DCON_DEMAND (0<<31) |
| #define S3C2410_DCON_HANDSHAKE (1<<31) |
| #define S3C2410_DCON_SYNC_PCLK (0<<30) |
| #define S3C2410_DCON_SYNC_HCLK (1<<30) |
| |
| #define S3C2410_DCON_INTREQ (1<<29) |
| |
| #define S3C2410_DCON_CH0_XDREQ0 (0<<24) |
| #define S3C2410_DCON_CH0_UART0 (1<<24) |
| #define S3C2410_DCON_CH0_SDI (2<<24) |
| #define S3C2410_DCON_CH0_TIMER (3<<24) |
| #define S3C2410_DCON_CH0_USBEP1 (4<<24) |
| |
| #define S3C2410_DCON_CH1_XDREQ1 (0<<24) |
| #define S3C2410_DCON_CH1_UART1 (1<<24) |
| #define S3C2410_DCON_CH1_I2SSDI (2<<24) |
| #define S3C2410_DCON_CH1_SPI (3<<24) |
| #define S3C2410_DCON_CH1_USBEP2 (4<<24) |
| |
| #define S3C2410_DCON_CH2_I2SSDO (0<<24) |
| #define S3C2410_DCON_CH2_I2SSDI (1<<24) |
| #define S3C2410_DCON_CH2_SDI (2<<24) |
| #define S3C2410_DCON_CH2_TIMER (3<<24) |
| #define S3C2410_DCON_CH2_USBEP3 (4<<24) |
| |
| #define S3C2410_DCON_CH3_UART2 (0<<24) |
| #define S3C2410_DCON_CH3_SDI (1<<24) |
| #define S3C2410_DCON_CH3_SPI (2<<24) |
| #define S3C2410_DCON_CH3_TIMER (3<<24) |
| #define S3C2410_DCON_CH3_USBEP4 (4<<24) |
| |
| #define S3C2410_DCON_SRCSHIFT (24) |
| #define S3C2410_DCON_SRCMASK (7<<24) |
| |
| #define S3C2410_DCON_BYTE (0<<20) |
| #define S3C2410_DCON_HALFWORD (1<<20) |
| #define S3C2410_DCON_WORD (2<<20) |
| |
| #define S3C2410_DCON_AUTORELOAD (0<<22) |
| #define S3C2410_DCON_NORELOAD (1<<22) |
| #define S3C2410_DCON_HWTRIG (1<<23) |
| |
| #ifdef CONFIG_CPU_S3C2440 |
| #define S3C2440_DIDSTC_CHKINT (1<<2) |
| |
| #define S3C2440_DCON_CH0_I2SSDO (5<<24) |
| #define S3C2440_DCON_CH0_PCMIN (6<<24) |
| |
| #define S3C2440_DCON_CH1_PCMOUT (5<<24) |
| #define S3C2440_DCON_CH1_SDI (6<<24) |
| |
| #define S3C2440_DCON_CH2_PCMIN (5<<24) |
| #define S3C2440_DCON_CH2_MICIN (6<<24) |
| |
| #define S3C2440_DCON_CH3_MICIN (5<<24) |
| #define S3C2440_DCON_CH3_PCMOUT (6<<24) |
| #endif |
| |
| #ifdef CONFIG_CPU_S3C2412 |
| |
| #define S3C2412_DMAREQSEL_SRC(x) ((x)<<1) |
| |
| #define S3C2412_DMAREQSEL_HW (1) |
| |
| #define S3C2412_DMAREQSEL_SPI0TX S3C2412_DMAREQSEL_SRC(0) |
| #define S3C2412_DMAREQSEL_SPI0RX S3C2412_DMAREQSEL_SRC(1) |
| #define S3C2412_DMAREQSEL_SPI1TX S3C2412_DMAREQSEL_SRC(2) |
| #define S3C2412_DMAREQSEL_SPI1RX S3C2412_DMAREQSEL_SRC(3) |
| #define S3C2412_DMAREQSEL_I2STX S3C2412_DMAREQSEL_SRC(4) |
| #define S3C2412_DMAREQSEL_I2SRX S3C2412_DMAREQSEL_SRC(5) |
| #define S3C2412_DMAREQSEL_TIMER S3C2412_DMAREQSEL_SRC(9) |
| #define S3C2412_DMAREQSEL_SDI S3C2412_DMAREQSEL_SRC(10) |
| #define S3C2412_DMAREQSEL_USBEP1 S3C2412_DMAREQSEL_SRC(13) |
| #define S3C2412_DMAREQSEL_USBEP2 S3C2412_DMAREQSEL_SRC(14) |
| #define S3C2412_DMAREQSEL_USBEP3 S3C2412_DMAREQSEL_SRC(15) |
| #define S3C2412_DMAREQSEL_USBEP4 S3C2412_DMAREQSEL_SRC(16) |
| #define S3C2412_DMAREQSEL_XDREQ0 S3C2412_DMAREQSEL_SRC(17) |
| #define S3C2412_DMAREQSEL_XDREQ1 S3C2412_DMAREQSEL_SRC(18) |
| #define S3C2412_DMAREQSEL_UART0_0 S3C2412_DMAREQSEL_SRC(19) |
| #define S3C2412_DMAREQSEL_UART0_1 S3C2412_DMAREQSEL_SRC(20) |
| #define S3C2412_DMAREQSEL_UART1_0 S3C2412_DMAREQSEL_SRC(21) |
| #define S3C2412_DMAREQSEL_UART1_1 S3C2412_DMAREQSEL_SRC(22) |
| #define S3C2412_DMAREQSEL_UART2_0 S3C2412_DMAREQSEL_SRC(23) |
| #define S3C2412_DMAREQSEL_UART2_1 S3C2412_DMAREQSEL_SRC(24) |
| |
| #endif |
| |
| #define S3C2443_DMAREQSEL_SRC(x) ((x)<<1) |
| |
| #define S3C2443_DMAREQSEL_HW (1) |
| |
| #define S3C2443_DMAREQSEL_SPI0TX S3C2443_DMAREQSEL_SRC(0) |
| #define S3C2443_DMAREQSEL_SPI0RX S3C2443_DMAREQSEL_SRC(1) |
| #define S3C2443_DMAREQSEL_SPI1TX S3C2443_DMAREQSEL_SRC(2) |
| #define S3C2443_DMAREQSEL_SPI1RX S3C2443_DMAREQSEL_SRC(3) |
| #define S3C2443_DMAREQSEL_I2STX S3C2443_DMAREQSEL_SRC(4) |
| #define S3C2443_DMAREQSEL_I2SRX S3C2443_DMAREQSEL_SRC(5) |
| #define S3C2443_DMAREQSEL_TIMER S3C2443_DMAREQSEL_SRC(9) |
| #define S3C2443_DMAREQSEL_SDI S3C2443_DMAREQSEL_SRC(10) |
| #define S3C2443_DMAREQSEL_XDREQ0 S3C2443_DMAREQSEL_SRC(17) |
| #define S3C2443_DMAREQSEL_XDREQ1 S3C2443_DMAREQSEL_SRC(18) |
| #define S3C2443_DMAREQSEL_UART0_0 S3C2443_DMAREQSEL_SRC(19) |
| #define S3C2443_DMAREQSEL_UART0_1 S3C2443_DMAREQSEL_SRC(20) |
| #define S3C2443_DMAREQSEL_UART1_0 S3C2443_DMAREQSEL_SRC(21) |
| #define S3C2443_DMAREQSEL_UART1_1 S3C2443_DMAREQSEL_SRC(22) |
| #define S3C2443_DMAREQSEL_UART2_0 S3C2443_DMAREQSEL_SRC(23) |
| #define S3C2443_DMAREQSEL_UART2_1 S3C2443_DMAREQSEL_SRC(24) |
| #define S3C2443_DMAREQSEL_UART3_0 S3C2443_DMAREQSEL_SRC(25) |
| #define S3C2443_DMAREQSEL_UART3_1 S3C2443_DMAREQSEL_SRC(26) |
| #define S3C2443_DMAREQSEL_PCMOUT S3C2443_DMAREQSEL_SRC(27) |
| #define S3C2443_DMAREQSEL_PCMIN S3C2443_DMAREQSEL_SRC(28) |
| #define S3C2443_DMAREQSEL_MICIN S3C2443_DMAREQSEL_SRC(29) |
| |
| #endif /* __ASM_ARCH_DMA_H */ |