| /* |
| * drivers/pcmcia/sa1100_jornada720.c |
| * |
| * Jornada720 PCMCIA specific routines |
| * |
| */ |
| #include <linux/module.h> |
| #include <linux/kernel.h> |
| #include <linux/device.h> |
| #include <linux/errno.h> |
| #include <linux/init.h> |
| |
| #include <asm/arch/hardware.h> |
| #include <asm/hardware/sa1111.h> |
| #include <asm/mach-types.h> |
| |
| #include "sa1111_generic.h" |
| |
| #define SOCKET0_POWER GPIO_GPIO0 |
| #define SOCKET0_3V GPIO_GPIO2 |
| #define SOCKET1_POWER (GPIO_GPIO1 | GPIO_GPIO3) |
| #warning *** Does SOCKET1_3V actually do anything? |
| #define SOCKET1_3V GPIO_GPIO3 |
| |
| static int jornada720_pcmcia_hw_init(struct soc_pcmcia_socket *skt) |
| { |
| /* |
| * What is all this crap for? |
| */ |
| GRER |= 0x00000002; |
| /* Set GPIO_A<3:1> to be outputs for PCMCIA/CF power controller: */ |
| sa1111_set_io_dir(SA1111_DEV(skt->dev), GPIO_A0|GPIO_A1|GPIO_A2|GPIO_A3, 0, 0); |
| sa1111_set_io(SA1111_DEV(skt->dev), GPIO_A0|GPIO_A1|GPIO_A2|GPIO_A3, 0); |
| sa1111_set_sleep_io(SA1111_DEV(skt->dev), GPIO_A0|GPIO_A1|GPIO_A2|GPIO_A3, 0); |
| |
| return sa1111_pcmcia_hw_init(skt); |
| } |
| |
| static int |
| jornada720_pcmcia_configure_socket(struct soc_pcmcia_socket *skt, const socket_state_t *state) |
| { |
| unsigned int pa_dwr_mask, pa_dwr_set; |
| int ret; |
| |
| printk("%s(): config socket %d vcc %d vpp %d\n", __func__, |
| skt->nr, state->Vcc, state->Vpp); |
| |
| switch (skt->nr) { |
| case 0: |
| pa_dwr_mask = SOCKET0_POWER | SOCKET0_3V; |
| |
| switch (state->Vcc) { |
| default: |
| case 0: pa_dwr_set = 0; break; |
| case 33: pa_dwr_set = SOCKET0_POWER | SOCKET0_3V; break; |
| case 50: pa_dwr_set = SOCKET0_POWER; break; |
| } |
| break; |
| |
| case 1: |
| pa_dwr_mask = SOCKET1_POWER; |
| |
| switch (state->Vcc) { |
| default: |
| case 0: pa_dwr_set = 0; break; |
| case 33: pa_dwr_set = SOCKET1_POWER; break; |
| case 50: pa_dwr_set = SOCKET1_POWER; break; |
| } |
| break; |
| |
| default: |
| return -1; |
| } |
| |
| if (state->Vpp != state->Vcc && state->Vpp != 0) { |
| printk(KERN_ERR "%s(): slot cannot support VPP %u\n", |
| __func__, state->Vpp); |
| return -1; |
| } |
| |
| ret = sa1111_pcmcia_configure_socket(skt, state); |
| if (ret == 0) { |
| unsigned long flags; |
| |
| local_irq_save(flags); |
| sa1111_set_io(SA1111_DEV(skt->dev), pa_dwr_mask, pa_dwr_set); |
| local_irq_restore(flags); |
| } |
| |
| return ret; |
| } |
| |
| static struct pcmcia_low_level jornada720_pcmcia_ops = { |
| .owner = THIS_MODULE, |
| .hw_init = jornada720_pcmcia_hw_init, |
| .hw_shutdown = sa1111_pcmcia_hw_shutdown, |
| .socket_state = sa1111_pcmcia_socket_state, |
| .configure_socket = jornada720_pcmcia_configure_socket, |
| |
| .socket_init = sa1111_pcmcia_socket_init, |
| .socket_suspend = sa1111_pcmcia_socket_suspend, |
| }; |
| |
| int __devinit pcmcia_jornada720_init(struct device *dev) |
| { |
| int ret = -ENODEV; |
| |
| if (machine_is_jornada720()) |
| ret = sa11xx_drv_pcmcia_probe(dev, &jornada720_pcmcia_ops, 0, 2); |
| |
| return ret; |
| } |