| /* |
| * A20R specific code |
| * |
| * This file is subject to the terms and conditions of the GNU General Public |
| * License. See the file "COPYING" in the main directory of this archive |
| * for more details. |
| * |
| * Copyright (C) 2006 Thomas Bogendoerfer (tsbogend@alpha.franken.de) |
| */ |
| |
| #include <linux/init.h> |
| #include <linux/interrupt.h> |
| #include <linux/irq.h> |
| #include <linux/platform_device.h> |
| #include <linux/serial_8250.h> |
| |
| #include <asm/sni.h> |
| #include <asm/time.h> |
| |
| #define PORT(_base,_irq) \ |
| { \ |
| .iobase = _base, \ |
| .irq = _irq, \ |
| .uartclk = 1843200, \ |
| .iotype = UPIO_PORT, \ |
| .flags = UPF_BOOT_AUTOCONF, \ |
| } |
| |
| static struct plat_serial8250_port a20r_data[] = { |
| PORT(0x3f8, 4), |
| PORT(0x2f8, 3), |
| { }, |
| }; |
| |
| static struct platform_device a20r_serial8250_device = { |
| .name = "serial8250", |
| .id = PLAT8250_DEV_PLATFORM, |
| .dev = { |
| .platform_data = a20r_data, |
| }, |
| }; |
| |
| static struct resource a20r_ds1216_rsrc[] = { |
| { |
| .start = 0x1c081ffc, |
| .end = 0x1c081fff, |
| .flags = IORESOURCE_MEM |
| } |
| }; |
| |
| static struct platform_device a20r_ds1216_device = { |
| .name = "rtc-ds1216", |
| .num_resources = ARRAY_SIZE(a20r_ds1216_rsrc), |
| .resource = a20r_ds1216_rsrc |
| }; |
| |
| static struct resource snirm_82596_rsrc[] = { |
| { |
| .start = 0x18000000, |
| .end = 0x18000004, |
| .flags = IORESOURCE_MEM |
| }, |
| { |
| .start = 0x18010000, |
| .end = 0x18010004, |
| .flags = IORESOURCE_MEM |
| }, |
| { |
| .start = 0x1ff00000, |
| .end = 0x1ff00020, |
| .flags = IORESOURCE_MEM |
| }, |
| { |
| .start = 22, |
| .end = 22, |
| .flags = IORESOURCE_IRQ |
| }, |
| { |
| .flags = 0x01 /* 16bit mpu port access */ |
| } |
| }; |
| |
| static struct platform_device snirm_82596_pdev = { |
| .name = "snirm_82596", |
| .num_resources = ARRAY_SIZE(snirm_82596_rsrc), |
| .resource = snirm_82596_rsrc |
| }; |
| |
| static struct resource snirm_53c710_rsrc[] = { |
| { |
| .start = 0x19000000, |
| .end = 0x190fffff, |
| .flags = IORESOURCE_MEM |
| }, |
| { |
| .start = 19, |
| .end = 19, |
| .flags = IORESOURCE_IRQ |
| } |
| }; |
| |
| static struct platform_device snirm_53c710_pdev = { |
| .name = "snirm_53c710", |
| .num_resources = ARRAY_SIZE(snirm_53c710_rsrc), |
| .resource = snirm_53c710_rsrc |
| }; |
| |
| static struct resource sc26xx_rsrc[] = { |
| { |
| .start = 0x1c070000, |
| .end = 0x1c0700ff, |
| .flags = IORESOURCE_MEM |
| }, |
| { |
| .start = 20, |
| .end = 20, |
| .flags = IORESOURCE_IRQ |
| } |
| }; |
| |
| static unsigned int sc26xx_data[2] = { |
| /* DTR | RTS | DSR | CTS | DCD | RI */ |
| (8 << 0) | (4 << 4) | (6 << 8) | (0 << 12) | (6 << 16) | (0 << 20), |
| (3 << 0) | (2 << 4) | (1 << 8) | (2 << 12) | (3 << 16) | (4 << 20) |
| }; |
| |
| static struct platform_device sc26xx_pdev = { |
| .name = "SC26xx", |
| .num_resources = ARRAY_SIZE(sc26xx_rsrc), |
| .resource = sc26xx_rsrc, |
| .dev = { |
| .platform_data = sc26xx_data, |
| } |
| }; |
| |
| #warning "Please try migrate to use new driver SCCNXP and report the status" \ |
| "in the linux-serial mailing list." |
| |
| /* The code bellow is a replacement of SC26XX to SCCNXP */ |
| #if 0 |
| #include <linux/platform_data/sccnxp.h> |
| |
| static struct sccnxp_pdata sccnxp_data = { |
| .reg_shift = 2, |
| .frequency = 3686400, |
| .mctrl_cfg[0] = MCTRL_SIG(DTR_OP, LINE_OP7) | |
| MCTRL_SIG(RTS_OP, LINE_OP3) | |
| MCTRL_SIG(DSR_IP, LINE_IP5) | |
| MCTRL_SIG(DCD_IP, LINE_IP6), |
| .mctrl_cfg[1] = MCTRL_SIG(DTR_OP, LINE_OP2) | |
| MCTRL_SIG(RTS_OP, LINE_OP1) | |
| MCTRL_SIG(DSR_IP, LINE_IP0) | |
| MCTRL_SIG(CTS_IP, LINE_IP1) | |
| MCTRL_SIG(DCD_IP, LINE_IP2) | |
| MCTRL_SIG(RNG_IP, LINE_IP3), |
| }; |
| |
| static struct platform_device sc2681_pdev = { |
| .name = "sc2681", |
| .resource = sc2xxx_rsrc, |
| .num_resources = ARRAY_SIZE(sc2xxx_rsrc), |
| .dev = { |
| .platform_data = &sccnxp_data, |
| }, |
| }; |
| #endif |
| |
| static u32 a20r_ack_hwint(void) |
| { |
| u32 status = read_c0_status(); |
| |
| write_c0_status(status | 0x00010000); |
| asm volatile( |
| " .set push \n" |
| " .set noat \n" |
| " .set noreorder \n" |
| " lw $1, 0(%0) \n" |
| " sb $0, 0(%1) \n" |
| " sync \n" |
| " lb %1, 0(%1) \n" |
| " b 1f \n" |
| " ori %1, $1, 2 \n" |
| " .align 8 \n" |
| "1: \n" |
| " nop \n" |
| " sw %1, 0(%0) \n" |
| " sync \n" |
| " li %1, 0x20 \n" |
| "2: \n" |
| " nop \n" |
| " bnez %1,2b \n" |
| " addiu %1, -1 \n" |
| " sw $1, 0(%0) \n" |
| " sync \n" |
| ".set pop \n" |
| : |
| : "Jr" (PCIMT_UCONF), "Jr" (0xbc000000)); |
| write_c0_status(status); |
| |
| return status; |
| } |
| |
| static inline void unmask_a20r_irq(struct irq_data *d) |
| { |
| set_c0_status(0x100 << (d->irq - SNI_A20R_IRQ_BASE)); |
| irq_enable_hazard(); |
| } |
| |
| static inline void mask_a20r_irq(struct irq_data *d) |
| { |
| clear_c0_status(0x100 << (d->irq - SNI_A20R_IRQ_BASE)); |
| irq_disable_hazard(); |
| } |
| |
| static struct irq_chip a20r_irq_type = { |
| .name = "A20R", |
| .irq_mask = mask_a20r_irq, |
| .irq_unmask = unmask_a20r_irq, |
| }; |
| |
| /* |
| * hwint 0 receive all interrupts |
| */ |
| static void a20r_hwint(void) |
| { |
| u32 cause, status; |
| int irq; |
| |
| clear_c0_status(IE_IRQ0); |
| status = a20r_ack_hwint(); |
| cause = read_c0_cause(); |
| |
| irq = ffs(((cause & status) >> 8) & 0xf8); |
| if (likely(irq > 0)) |
| do_IRQ(SNI_A20R_IRQ_BASE + irq - 1); |
| set_c0_status(IE_IRQ0); |
| } |
| |
| void __init sni_a20r_irq_init(void) |
| { |
| int i; |
| |
| for (i = SNI_A20R_IRQ_BASE + 2 ; i < SNI_A20R_IRQ_BASE + 8; i++) |
| irq_set_chip_and_handler(i, &a20r_irq_type, handle_level_irq); |
| sni_hwint = a20r_hwint; |
| change_c0_status(ST0_IM, IE_IRQ0); |
| setup_irq(SNI_A20R_IRQ_BASE + 3, &sni_isa_irq); |
| } |
| |
| void sni_a20r_init(void) |
| { |
| /* FIXME, remove if not needed */ |
| } |
| |
| static int __init snirm_a20r_setup_devinit(void) |
| { |
| switch (sni_brd_type) { |
| case SNI_BRD_TOWER_OASIC: |
| case SNI_BRD_MINITOWER: |
| platform_device_register(&snirm_82596_pdev); |
| platform_device_register(&snirm_53c710_pdev); |
| platform_device_register(&sc26xx_pdev); |
| platform_device_register(&a20r_serial8250_device); |
| platform_device_register(&a20r_ds1216_device); |
| sni_eisa_root_init(); |
| break; |
| } |
| return 0; |
| } |
| |
| device_initcall(snirm_a20r_setup_devinit); |