| * Samsung AHCI SATA Controller |
| |
| SATA nodes are defined to describe on-chip Serial ATA controllers. |
| Each SATA controller should have its own node. |
| |
| Required properties: |
| - compatible : compatible list, contains "samsung,exynos5-sata" |
| - interrupts : <interrupt mapping for SATA IRQ> |
| - reg : <registers mapping> |
| - samsung,sata-freq : <frequency in MHz> |
| - phys : as mentioned in phy-bindings.txt |
| - phy-names : as mentioned in phy-bindings.txt |
| |
| Example: |
| sata@122f0000 { |
| compatible = "snps,dwc-ahci"; |
| samsung,sata-freq = <66>; |
| reg = <0x122f0000 0x1ff>; |
| interrupts = <0 115 0>; |
| clocks = <&clock 277>, <&clock 143>; |
| clock-names = "sata", "sclk_sata"; |
| phys = <&sata_phy>; |
| phy-names = "sata-phy"; |
| }; |