| #include <linux/aer.h> |
| #include <linux/delay.h> |
| #include <linux/debugfs.h> |
| #include <linux/firmware.h> |
| #include <linux/list.h> |
| #include <linux/module.h> |
| #include <linux/mutex.h> |
| #include <linux/pci.h> |
| #include <linux/pci_ids.h> |
| |
| #include "nitrox_dev.h" |
| #include "nitrox_common.h" |
| #include "nitrox_csr.h" |
| |
| #define CNN55XX_DEV_ID 0x12 |
| #define MAX_PF_QUEUES 64 |
| #define UCODE_HLEN 48 |
| #define SE_GROUP 0 |
| |
| #define DRIVER_VERSION "1.0" |
| #define FW_DIR "cavium/" |
| /* SE microcode */ |
| #define SE_FW FW_DIR "cnn55xx_se.fw" |
| |
| static const char nitrox_driver_name[] = "CNN55XX"; |
| |
| static LIST_HEAD(ndevlist); |
| static DEFINE_MUTEX(devlist_lock); |
| static unsigned int num_devices; |
| |
| /** |
| * nitrox_pci_tbl - PCI Device ID Table |
| */ |
| static const struct pci_device_id nitrox_pci_tbl[] = { |
| {PCI_VDEVICE(CAVIUM, CNN55XX_DEV_ID), 0}, |
| /* required last entry */ |
| {0, } |
| }; |
| MODULE_DEVICE_TABLE(pci, nitrox_pci_tbl); |
| |
| static unsigned int qlen = DEFAULT_CMD_QLEN; |
| module_param(qlen, uint, 0644); |
| MODULE_PARM_DESC(qlen, "Command queue length - default 2048"); |
| |
| /** |
| * struct ucode - Firmware Header |
| * @id: microcode ID |
| * @version: firmware version |
| * @code_size: code section size |
| * @raz: alignment |
| * @code: code section |
| */ |
| struct ucode { |
| u8 id; |
| char version[VERSION_LEN - 1]; |
| __be32 code_size; |
| u8 raz[12]; |
| u64 code[0]; |
| }; |
| |
| /** |
| * write_to_ucd_unit - Write Firmware to NITROX UCD unit |
| */ |
| static void write_to_ucd_unit(struct nitrox_device *ndev, |
| struct ucode *ucode) |
| { |
| u32 code_size = be32_to_cpu(ucode->code_size) * 2; |
| u64 offset, data; |
| int i = 0; |
| |
| /* |
| * UCD structure |
| * |
| * ------------- |
| * | BLK 7 | |
| * ------------- |
| * | BLK 6 | |
| * ------------- |
| * | ... | |
| * ------------- |
| * | BLK 0 | |
| * ------------- |
| * Total of 8 blocks, each size 32KB |
| */ |
| |
| /* set the block number */ |
| offset = UCD_UCODE_LOAD_BLOCK_NUM; |
| nitrox_write_csr(ndev, offset, 0); |
| |
| code_size = roundup(code_size, 8); |
| while (code_size) { |
| data = ucode->code[i]; |
| /* write 8 bytes at a time */ |
| offset = UCD_UCODE_LOAD_IDX_DATAX(i); |
| nitrox_write_csr(ndev, offset, data); |
| code_size -= 8; |
| i++; |
| } |
| |
| /* put all SE cores in group 0 */ |
| offset = POM_GRP_EXECMASKX(SE_GROUP); |
| nitrox_write_csr(ndev, offset, (~0ULL)); |
| |
| for (i = 0; i < ndev->hw.se_cores; i++) { |
| /* |
| * write block number and firware length |
| * bit:<2:0> block number |
| * bit:3 is set SE uses 32KB microcode |
| * bit:3 is clear SE uses 64KB microcode |
| */ |
| offset = UCD_SE_EID_UCODE_BLOCK_NUMX(i); |
| nitrox_write_csr(ndev, offset, 0x8); |
| } |
| usleep_range(300, 400); |
| } |
| |
| static int nitrox_load_fw(struct nitrox_device *ndev, const char *fw_name) |
| { |
| const struct firmware *fw; |
| struct ucode *ucode; |
| int ret; |
| |
| dev_info(DEV(ndev), "Loading firmware \"%s\"\n", fw_name); |
| |
| ret = request_firmware(&fw, fw_name, DEV(ndev)); |
| if (ret < 0) { |
| dev_err(DEV(ndev), "failed to get firmware %s\n", fw_name); |
| return ret; |
| } |
| |
| ucode = (struct ucode *)fw->data; |
| /* copy the firmware version */ |
| memcpy(ndev->hw.fw_name, ucode->version, (VERSION_LEN - 2)); |
| ndev->hw.fw_name[VERSION_LEN - 1] = '\0'; |
| |
| write_to_ucd_unit(ndev, ucode); |
| release_firmware(fw); |
| |
| set_bit(NITROX_UCODE_LOADED, &ndev->status); |
| /* barrier to sync with other cpus */ |
| smp_mb__after_atomic(); |
| return 0; |
| } |
| |
| /** |
| * nitrox_add_to_devlist - add NITROX device to global device list |
| * @ndev: NITROX device |
| */ |
| static int nitrox_add_to_devlist(struct nitrox_device *ndev) |
| { |
| struct nitrox_device *dev; |
| int ret = 0; |
| |
| INIT_LIST_HEAD(&ndev->list); |
| refcount_set(&ndev->refcnt, 1); |
| |
| mutex_lock(&devlist_lock); |
| list_for_each_entry(dev, &ndevlist, list) { |
| if (dev == ndev) { |
| ret = -EEXIST; |
| goto unlock; |
| } |
| } |
| ndev->idx = num_devices++; |
| list_add_tail(&ndev->list, &ndevlist); |
| unlock: |
| mutex_unlock(&devlist_lock); |
| return ret; |
| } |
| |
| /** |
| * nitrox_remove_from_devlist - remove NITROX device from |
| * global device list |
| * @ndev: NITROX device |
| */ |
| static void nitrox_remove_from_devlist(struct nitrox_device *ndev) |
| { |
| mutex_lock(&devlist_lock); |
| list_del(&ndev->list); |
| num_devices--; |
| mutex_unlock(&devlist_lock); |
| } |
| |
| struct nitrox_device *nitrox_get_first_device(void) |
| { |
| struct nitrox_device *ndev; |
| |
| mutex_lock(&devlist_lock); |
| list_for_each_entry(ndev, &ndevlist, list) { |
| if (nitrox_ready(ndev)) |
| break; |
| } |
| mutex_unlock(&devlist_lock); |
| if (&ndev->list == &ndevlist) |
| return NULL; |
| |
| refcount_inc(&ndev->refcnt); |
| /* barrier to sync with other cpus */ |
| smp_mb__after_atomic(); |
| return ndev; |
| } |
| |
| void nitrox_put_device(struct nitrox_device *ndev) |
| { |
| if (!ndev) |
| return; |
| |
| refcount_dec(&ndev->refcnt); |
| /* barrier to sync with other cpus */ |
| smp_mb__after_atomic(); |
| } |
| |
| static int nitrox_reset_device(struct pci_dev *pdev) |
| { |
| int pos = 0; |
| |
| pos = pci_save_state(pdev); |
| if (pos) { |
| dev_err(&pdev->dev, "Failed to save pci state\n"); |
| return -ENOMEM; |
| } |
| |
| pos = pci_pcie_cap(pdev); |
| if (!pos) |
| return -ENOTTY; |
| |
| if (!pci_wait_for_pending_transaction(pdev)) |
| dev_err(&pdev->dev, "waiting for pending transaction\n"); |
| |
| pcie_capability_set_word(pdev, PCI_EXP_DEVCTL, PCI_EXP_DEVCTL_BCR_FLR); |
| msleep(100); |
| pci_restore_state(pdev); |
| |
| return 0; |
| } |
| |
| static int nitrox_pf_sw_init(struct nitrox_device *ndev) |
| { |
| int err; |
| |
| err = nitrox_common_sw_init(ndev); |
| if (err) |
| return err; |
| |
| err = nitrox_pf_init_isr(ndev); |
| if (err) |
| nitrox_common_sw_cleanup(ndev); |
| |
| return err; |
| } |
| |
| static void nitrox_pf_sw_cleanup(struct nitrox_device *ndev) |
| { |
| nitrox_pf_cleanup_isr(ndev); |
| nitrox_common_sw_cleanup(ndev); |
| } |
| |
| /** |
| * nitrox_bist_check - Check NITORX BIST registers status |
| * @ndev: NITROX device |
| */ |
| static int nitrox_bist_check(struct nitrox_device *ndev) |
| { |
| u64 value = 0; |
| int i; |
| |
| for (i = 0; i < NR_CLUSTERS; i++) { |
| value += nitrox_read_csr(ndev, EMU_BIST_STATUSX(i)); |
| value += nitrox_read_csr(ndev, EFL_CORE_BIST_REGX(i)); |
| } |
| value += nitrox_read_csr(ndev, UCD_BIST_STATUS); |
| value += nitrox_read_csr(ndev, NPS_CORE_BIST_REG); |
| value += nitrox_read_csr(ndev, NPS_CORE_NPC_BIST_REG); |
| value += nitrox_read_csr(ndev, NPS_PKT_SLC_BIST_REG); |
| value += nitrox_read_csr(ndev, NPS_PKT_IN_BIST_REG); |
| value += nitrox_read_csr(ndev, POM_BIST_REG); |
| value += nitrox_read_csr(ndev, BMI_BIST_REG); |
| value += nitrox_read_csr(ndev, EFL_TOP_BIST_STAT); |
| value += nitrox_read_csr(ndev, BMO_BIST_REG); |
| value += nitrox_read_csr(ndev, LBC_BIST_STATUS); |
| value += nitrox_read_csr(ndev, PEM_BIST_STATUSX(0)); |
| if (value) |
| return -EIO; |
| return 0; |
| } |
| |
| static void nitrox_get_hwinfo(struct nitrox_device *ndev) |
| { |
| union emu_fuse_map emu_fuse; |
| u64 offset; |
| int i; |
| |
| for (i = 0; i < NR_CLUSTERS; i++) { |
| u8 dead_cores; |
| |
| offset = EMU_FUSE_MAPX(i); |
| emu_fuse.value = nitrox_read_csr(ndev, offset); |
| if (emu_fuse.s.valid) { |
| dead_cores = hweight32(emu_fuse.s.ae_fuse); |
| ndev->hw.ae_cores += AE_CORES_PER_CLUSTER - dead_cores; |
| dead_cores = hweight16(emu_fuse.s.se_fuse); |
| ndev->hw.se_cores += SE_CORES_PER_CLUSTER - dead_cores; |
| } |
| } |
| } |
| |
| static int nitrox_pf_hw_init(struct nitrox_device *ndev) |
| { |
| int err; |
| |
| err = nitrox_bist_check(ndev); |
| if (err) { |
| dev_err(&ndev->pdev->dev, "BIST check failed\n"); |
| return err; |
| } |
| /* get cores information */ |
| nitrox_get_hwinfo(ndev); |
| |
| nitrox_config_nps_unit(ndev); |
| nitrox_config_pom_unit(ndev); |
| nitrox_config_efl_unit(ndev); |
| /* configure IO units */ |
| nitrox_config_bmi_unit(ndev); |
| nitrox_config_bmo_unit(ndev); |
| /* configure Local Buffer Cache */ |
| nitrox_config_lbc_unit(ndev); |
| nitrox_config_rand_unit(ndev); |
| |
| /* load firmware on SE cores */ |
| err = nitrox_load_fw(ndev, SE_FW); |
| if (err) |
| return err; |
| |
| nitrox_config_emu_unit(ndev); |
| |
| return 0; |
| } |
| |
| #if IS_ENABLED(CONFIG_DEBUG_FS) |
| static int registers_show(struct seq_file *s, void *v) |
| { |
| struct nitrox_device *ndev = s->private; |
| u64 offset; |
| |
| /* NPS DMA stats */ |
| offset = NPS_STATS_PKT_DMA_RD_CNT; |
| seq_printf(s, "NPS_STATS_PKT_DMA_RD_CNT 0x%016llx\n", |
| nitrox_read_csr(ndev, offset)); |
| offset = NPS_STATS_PKT_DMA_WR_CNT; |
| seq_printf(s, "NPS_STATS_PKT_DMA_WR_CNT 0x%016llx\n", |
| nitrox_read_csr(ndev, offset)); |
| |
| /* BMI/BMO stats */ |
| offset = BMI_NPS_PKT_CNT; |
| seq_printf(s, "BMI_NPS_PKT_CNT 0x%016llx\n", |
| nitrox_read_csr(ndev, offset)); |
| offset = BMO_NPS_SLC_PKT_CNT; |
| seq_printf(s, "BMO_NPS_PKT_CNT 0x%016llx\n", |
| nitrox_read_csr(ndev, offset)); |
| |
| return 0; |
| } |
| |
| static int registers_open(struct inode *inode, struct file *file) |
| { |
| return single_open(file, registers_show, inode->i_private); |
| } |
| |
| static const struct file_operations register_fops = { |
| .owner = THIS_MODULE, |
| .open = registers_open, |
| .read = seq_read, |
| .llseek = seq_lseek, |
| .release = single_release, |
| }; |
| |
| static int firmware_show(struct seq_file *s, void *v) |
| { |
| struct nitrox_device *ndev = s->private; |
| |
| seq_printf(s, "Version: %s\n", ndev->hw.fw_name); |
| return 0; |
| } |
| |
| static int firmware_open(struct inode *inode, struct file *file) |
| { |
| return single_open(file, firmware_show, inode->i_private); |
| } |
| |
| static const struct file_operations firmware_fops = { |
| .owner = THIS_MODULE, |
| .open = firmware_open, |
| .read = seq_read, |
| .llseek = seq_lseek, |
| .release = single_release, |
| }; |
| |
| static int nitrox_show(struct seq_file *s, void *v) |
| { |
| struct nitrox_device *ndev = s->private; |
| |
| seq_printf(s, "NITROX-5 [idx: %d]\n", ndev->idx); |
| seq_printf(s, " Revision ID: 0x%0x\n", ndev->hw.revision_id); |
| seq_printf(s, " Cores [AE: %u SE: %u]\n", |
| ndev->hw.ae_cores, ndev->hw.se_cores); |
| seq_printf(s, " Number of Queues: %u\n", ndev->nr_queues); |
| seq_printf(s, " Queue length: %u\n", ndev->qlen); |
| seq_printf(s, " Node: %u\n", ndev->node); |
| |
| return 0; |
| } |
| |
| static int nitrox_open(struct inode *inode, struct file *file) |
| { |
| return single_open(file, nitrox_show, inode->i_private); |
| } |
| |
| static const struct file_operations nitrox_fops = { |
| .owner = THIS_MODULE, |
| .open = nitrox_open, |
| .read = seq_read, |
| .llseek = seq_lseek, |
| .release = single_release, |
| }; |
| |
| static void nitrox_debugfs_exit(struct nitrox_device *ndev) |
| { |
| debugfs_remove_recursive(ndev->debugfs_dir); |
| ndev->debugfs_dir = NULL; |
| } |
| |
| static int nitrox_debugfs_init(struct nitrox_device *ndev) |
| { |
| struct dentry *dir, *f; |
| |
| dir = debugfs_create_dir(KBUILD_MODNAME, NULL); |
| if (!dir) |
| return -ENOMEM; |
| |
| ndev->debugfs_dir = dir; |
| f = debugfs_create_file("counters", 0400, dir, ndev, ®ister_fops); |
| if (!f) |
| goto err; |
| f = debugfs_create_file("firmware", 0400, dir, ndev, &firmware_fops); |
| if (!f) |
| goto err; |
| f = debugfs_create_file("nitrox", 0400, dir, ndev, &nitrox_fops); |
| if (!f) |
| goto err; |
| |
| return 0; |
| |
| err: |
| nitrox_debugfs_exit(ndev); |
| return -ENODEV; |
| } |
| #else |
| static int nitrox_debugfs_init(struct nitrox_device *ndev) |
| { |
| return 0; |
| } |
| |
| static void nitrox_debugfs_exit(struct nitrox_device *ndev) |
| { |
| } |
| #endif |
| |
| /** |
| * nitrox_probe - NITROX Initialization function. |
| * @pdev: PCI device information struct |
| * @id: entry in nitrox_pci_tbl |
| * |
| * Return: 0, if the driver is bound to the device, or |
| * a negative error if there is failure. |
| */ |
| static int nitrox_probe(struct pci_dev *pdev, |
| const struct pci_device_id *id) |
| { |
| struct nitrox_device *ndev; |
| int err; |
| |
| dev_info_once(&pdev->dev, "%s driver version %s\n", |
| nitrox_driver_name, DRIVER_VERSION); |
| |
| err = pci_enable_device_mem(pdev); |
| if (err) |
| return err; |
| |
| /* do FLR */ |
| err = nitrox_reset_device(pdev); |
| if (err) { |
| dev_err(&pdev->dev, "FLR failed\n"); |
| pci_disable_device(pdev); |
| return err; |
| } |
| |
| if (!dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(64))) { |
| dev_dbg(&pdev->dev, "DMA to 64-BIT address\n"); |
| } else { |
| err = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32)); |
| if (err) { |
| dev_err(&pdev->dev, "DMA configuration failed\n"); |
| pci_disable_device(pdev); |
| return err; |
| } |
| } |
| |
| err = pci_request_mem_regions(pdev, nitrox_driver_name); |
| if (err) { |
| pci_disable_device(pdev); |
| return err; |
| } |
| pci_set_master(pdev); |
| |
| ndev = kzalloc(sizeof(*ndev), GFP_KERNEL); |
| if (!ndev) { |
| err = -ENOMEM; |
| goto ndev_fail; |
| } |
| |
| pci_set_drvdata(pdev, ndev); |
| ndev->pdev = pdev; |
| |
| /* add to device list */ |
| nitrox_add_to_devlist(ndev); |
| |
| ndev->hw.vendor_id = pdev->vendor; |
| ndev->hw.device_id = pdev->device; |
| ndev->hw.revision_id = pdev->revision; |
| /* command timeout in jiffies */ |
| ndev->timeout = msecs_to_jiffies(CMD_TIMEOUT); |
| ndev->node = dev_to_node(&pdev->dev); |
| if (ndev->node == NUMA_NO_NODE) |
| ndev->node = 0; |
| |
| ndev->bar_addr = ioremap(pci_resource_start(pdev, 0), |
| pci_resource_len(pdev, 0)); |
| if (!ndev->bar_addr) { |
| err = -EIO; |
| goto ioremap_err; |
| } |
| /* allocate command queus based on cpus, max queues are 64 */ |
| ndev->nr_queues = min_t(u32, MAX_PF_QUEUES, num_online_cpus()); |
| ndev->qlen = qlen; |
| |
| err = nitrox_pf_sw_init(ndev); |
| if (err) |
| goto ioremap_err; |
| |
| err = nitrox_pf_hw_init(ndev); |
| if (err) |
| goto pf_hw_fail; |
| |
| err = nitrox_debugfs_init(ndev); |
| if (err) |
| goto pf_hw_fail; |
| |
| set_bit(NITROX_READY, &ndev->status); |
| /* barrier to sync with other cpus */ |
| smp_mb__after_atomic(); |
| |
| err = nitrox_crypto_register(); |
| if (err) |
| goto crypto_fail; |
| |
| return 0; |
| |
| crypto_fail: |
| nitrox_debugfs_exit(ndev); |
| clear_bit(NITROX_READY, &ndev->status); |
| /* barrier to sync with other cpus */ |
| smp_mb__after_atomic(); |
| pf_hw_fail: |
| nitrox_pf_sw_cleanup(ndev); |
| ioremap_err: |
| nitrox_remove_from_devlist(ndev); |
| kfree(ndev); |
| pci_set_drvdata(pdev, NULL); |
| ndev_fail: |
| pci_release_mem_regions(pdev); |
| pci_disable_device(pdev); |
| return err; |
| } |
| |
| /** |
| * nitrox_remove - Unbind the driver from the device. |
| * @pdev: PCI device information struct |
| */ |
| static void nitrox_remove(struct pci_dev *pdev) |
| { |
| struct nitrox_device *ndev = pci_get_drvdata(pdev); |
| |
| if (!ndev) |
| return; |
| |
| if (!refcount_dec_and_test(&ndev->refcnt)) { |
| dev_err(DEV(ndev), "Device refcnt not zero (%d)\n", |
| refcount_read(&ndev->refcnt)); |
| return; |
| } |
| |
| dev_info(DEV(ndev), "Removing Device %x:%x\n", |
| ndev->hw.vendor_id, ndev->hw.device_id); |
| |
| clear_bit(NITROX_READY, &ndev->status); |
| /* barrier to sync with other cpus */ |
| smp_mb__after_atomic(); |
| |
| nitrox_remove_from_devlist(ndev); |
| nitrox_crypto_unregister(); |
| nitrox_debugfs_exit(ndev); |
| nitrox_pf_sw_cleanup(ndev); |
| |
| iounmap(ndev->bar_addr); |
| kfree(ndev); |
| |
| pci_set_drvdata(pdev, NULL); |
| pci_release_mem_regions(pdev); |
| pci_disable_device(pdev); |
| } |
| |
| static void nitrox_shutdown(struct pci_dev *pdev) |
| { |
| pci_set_drvdata(pdev, NULL); |
| pci_release_mem_regions(pdev); |
| pci_disable_device(pdev); |
| } |
| |
| static struct pci_driver nitrox_driver = { |
| .name = nitrox_driver_name, |
| .id_table = nitrox_pci_tbl, |
| .probe = nitrox_probe, |
| .remove = nitrox_remove, |
| .shutdown = nitrox_shutdown, |
| }; |
| |
| module_pci_driver(nitrox_driver); |
| |
| MODULE_AUTHOR("Srikanth Jampala <Jampala.Srikanth@cavium.com>"); |
| MODULE_DESCRIPTION("Cavium CNN55XX PF Driver" DRIVER_VERSION " "); |
| MODULE_LICENSE("GPL"); |
| MODULE_VERSION(DRIVER_VERSION); |
| MODULE_FIRMWARE(SE_FW); |