| /* |
| * Copyright IBM Corp. 2005, 2011 |
| * |
| * Author(s): Rolf Adelsberger, |
| * Heiko Carstens <heiko.carstens@de.ibm.com> |
| * Michael Holzheu <holzheu@linux.vnet.ibm.com> |
| */ |
| |
| #include <linux/device.h> |
| #include <linux/mm.h> |
| #include <linux/kexec.h> |
| #include <linux/delay.h> |
| #include <linux/reboot.h> |
| #include <linux/ftrace.h> |
| #include <linux/debug_locks.h> |
| #include <linux/suspend.h> |
| #include <asm/cio.h> |
| #include <asm/setup.h> |
| #include <asm/pgtable.h> |
| #include <asm/pgalloc.h> |
| #include <asm/smp.h> |
| #include <asm/reset.h> |
| #include <asm/ipl.h> |
| #include <asm/diag.h> |
| #include <asm/elf.h> |
| #include <asm/asm-offsets.h> |
| #include <asm/cacheflush.h> |
| #include <asm/os_info.h> |
| #include <asm/switch_to.h> |
| |
| typedef void (*relocate_kernel_t)(kimage_entry_t *, unsigned long); |
| |
| extern const unsigned char relocate_kernel[]; |
| extern const unsigned long long relocate_kernel_len; |
| |
| #ifdef CONFIG_CRASH_DUMP |
| |
| /* |
| * PM notifier callback for kdump |
| */ |
| static int machine_kdump_pm_cb(struct notifier_block *nb, unsigned long action, |
| void *ptr) |
| { |
| switch (action) { |
| case PM_SUSPEND_PREPARE: |
| case PM_HIBERNATION_PREPARE: |
| if (kexec_crash_image) |
| arch_kexec_unprotect_crashkres(); |
| break; |
| case PM_POST_SUSPEND: |
| case PM_POST_HIBERNATION: |
| if (kexec_crash_image) |
| arch_kexec_protect_crashkres(); |
| break; |
| default: |
| return NOTIFY_DONE; |
| } |
| return NOTIFY_OK; |
| } |
| |
| static int __init machine_kdump_pm_init(void) |
| { |
| pm_notifier(machine_kdump_pm_cb, 0); |
| return 0; |
| } |
| arch_initcall(machine_kdump_pm_init); |
| |
| /* |
| * Reset the system, copy boot CPU registers to absolute zero, |
| * and jump to the kdump image |
| */ |
| static void __do_machine_kdump(void *image) |
| { |
| int (*start_kdump)(int); |
| unsigned long prefix; |
| |
| /* store_status() saved the prefix register to lowcore */ |
| prefix = (unsigned long) S390_lowcore.prefixreg_save_area; |
| |
| /* Now do the reset */ |
| s390_reset_system(); |
| |
| /* |
| * Copy dump CPU store status info to absolute zero. |
| * This need to be done *after* s390_reset_system set the |
| * prefix register of this CPU to zero |
| */ |
| memcpy((void *) __LC_FPREGS_SAVE_AREA, |
| (void *)(prefix + __LC_FPREGS_SAVE_AREA), 512); |
| |
| __load_psw_mask(PSW_MASK_BASE | PSW_DEFAULT_KEY | PSW_MASK_EA | PSW_MASK_BA); |
| start_kdump = (void *)((struct kimage *) image)->start; |
| start_kdump(1); |
| |
| /* Die if start_kdump returns */ |
| disabled_wait((unsigned long) __builtin_return_address(0)); |
| } |
| |
| /* |
| * Start kdump: create a LGR log entry, store status of all CPUs and |
| * branch to __do_machine_kdump. |
| */ |
| static noinline void __machine_kdump(void *image) |
| { |
| int this_cpu, cpu; |
| |
| lgr_info_log(); |
| /* Get status of the other CPUs */ |
| this_cpu = smp_find_processor_id(stap()); |
| for_each_online_cpu(cpu) { |
| if (cpu == this_cpu) |
| continue; |
| if (smp_store_status(cpu)) |
| continue; |
| } |
| /* Store status of the boot CPU */ |
| if (MACHINE_HAS_VX) |
| save_vx_regs((void *) &S390_lowcore.vector_save_area); |
| /* |
| * To create a good backchain for this CPU in the dump store_status |
| * is passed the address of a function. The address is saved into |
| * the PSW save area of the boot CPU and the function is invoked as |
| * a tail call of store_status. The backchain in the dump will look |
| * like this: |
| * restart_int_handler -> __machine_kexec -> __do_machine_kdump |
| * The call to store_status() will not return. |
| */ |
| store_status(__do_machine_kdump, image); |
| } |
| #endif |
| |
| /* |
| * Check if kdump checksums are valid: We call purgatory with parameter "0" |
| */ |
| static int kdump_csum_valid(struct kimage *image) |
| { |
| #ifdef CONFIG_CRASH_DUMP |
| int (*start_kdump)(int) = (void *)image->start; |
| int rc; |
| |
| __arch_local_irq_stnsm(0xfb); /* disable DAT */ |
| rc = start_kdump(0); |
| __arch_local_irq_stosm(0x04); /* enable DAT */ |
| return rc ? 0 : -EINVAL; |
| #else |
| return -EINVAL; |
| #endif |
| } |
| |
| #ifdef CONFIG_CRASH_DUMP |
| |
| void crash_free_reserved_phys_range(unsigned long begin, unsigned long end) |
| { |
| unsigned long addr, size; |
| |
| for (addr = begin; addr < end; addr += PAGE_SIZE) |
| free_reserved_page(pfn_to_page(addr >> PAGE_SHIFT)); |
| size = begin - crashk_res.start; |
| if (size) |
| os_info_crashkernel_add(crashk_res.start, size); |
| else |
| os_info_crashkernel_add(0, 0); |
| } |
| |
| static void crash_protect_pages(int protect) |
| { |
| unsigned long size; |
| |
| if (!crashk_res.end) |
| return; |
| size = resource_size(&crashk_res); |
| if (protect) |
| set_memory_ro(crashk_res.start, size >> PAGE_SHIFT); |
| else |
| set_memory_rw(crashk_res.start, size >> PAGE_SHIFT); |
| } |
| |
| void arch_kexec_protect_crashkres(void) |
| { |
| crash_protect_pages(1); |
| } |
| |
| void arch_kexec_unprotect_crashkres(void) |
| { |
| crash_protect_pages(0); |
| } |
| |
| #endif |
| |
| /* |
| * Give back memory to hypervisor before new kdump is loaded |
| */ |
| static int machine_kexec_prepare_kdump(void) |
| { |
| #ifdef CONFIG_CRASH_DUMP |
| if (MACHINE_IS_VM) |
| diag10_range(PFN_DOWN(crashk_res.start), |
| PFN_DOWN(crashk_res.end - crashk_res.start + 1)); |
| return 0; |
| #else |
| return -EINVAL; |
| #endif |
| } |
| |
| int machine_kexec_prepare(struct kimage *image) |
| { |
| void *reboot_code_buffer; |
| |
| /* Can't replace kernel image since it is read-only. */ |
| if (ipl_flags & IPL_NSS_VALID) |
| return -EOPNOTSUPP; |
| |
| if (image->type == KEXEC_TYPE_CRASH) |
| return machine_kexec_prepare_kdump(); |
| |
| /* We don't support anything but the default image type for now. */ |
| if (image->type != KEXEC_TYPE_DEFAULT) |
| return -EINVAL; |
| |
| /* Get the destination where the assembler code should be copied to.*/ |
| reboot_code_buffer = (void *) page_to_phys(image->control_code_page); |
| |
| /* Then copy it */ |
| memcpy(reboot_code_buffer, relocate_kernel, relocate_kernel_len); |
| return 0; |
| } |
| |
| void machine_kexec_cleanup(struct kimage *image) |
| { |
| } |
| |
| void arch_crash_save_vmcoreinfo(void) |
| { |
| VMCOREINFO_SYMBOL(lowcore_ptr); |
| VMCOREINFO_SYMBOL(high_memory); |
| VMCOREINFO_LENGTH(lowcore_ptr, NR_CPUS); |
| } |
| |
| void machine_shutdown(void) |
| { |
| } |
| |
| void machine_crash_shutdown(struct pt_regs *regs) |
| { |
| } |
| |
| /* |
| * Do normal kexec |
| */ |
| static void __do_machine_kexec(void *data) |
| { |
| relocate_kernel_t data_mover; |
| struct kimage *image = data; |
| |
| s390_reset_system(); |
| data_mover = (relocate_kernel_t) page_to_phys(image->control_code_page); |
| |
| /* Call the moving routine */ |
| (*data_mover)(&image->head, image->start); |
| |
| /* Die if kexec returns */ |
| disabled_wait((unsigned long) __builtin_return_address(0)); |
| } |
| |
| /* |
| * Reset system and call either kdump or normal kexec |
| */ |
| static void __machine_kexec(void *data) |
| { |
| __arch_local_irq_stosm(0x04); /* enable DAT */ |
| pfault_fini(); |
| tracing_off(); |
| debug_locks_off(); |
| #ifdef CONFIG_CRASH_DUMP |
| if (((struct kimage *) data)->type == KEXEC_TYPE_CRASH) |
| __machine_kdump(data); |
| #endif |
| __do_machine_kexec(data); |
| } |
| |
| /* |
| * Do either kdump or normal kexec. In case of kdump we first ask |
| * purgatory, if kdump checksums are valid. |
| */ |
| void machine_kexec(struct kimage *image) |
| { |
| if (image->type == KEXEC_TYPE_CRASH && !kdump_csum_valid(image)) |
| return; |
| tracer_disable(); |
| smp_send_stop(); |
| smp_call_ipl_cpu(__machine_kexec, image); |
| } |