| /* |
| * HackRF driver |
| * |
| * Copyright (C) 2014 Antti Palosaari <crope@iki.fi> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/slab.h> |
| #include <linux/usb.h> |
| #include <media/v4l2-device.h> |
| #include <media/v4l2-ioctl.h> |
| #include <media/v4l2-ctrls.h> |
| #include <media/v4l2-event.h> |
| #include <media/videobuf2-v4l2.h> |
| #include <media/videobuf2-vmalloc.h> |
| |
| /* HackRF USB API commands (from HackRF Library) */ |
| enum { |
| CMD_SET_TRANSCEIVER_MODE = 0x01, |
| CMD_SAMPLE_RATE_SET = 0x06, |
| CMD_BASEBAND_FILTER_BANDWIDTH_SET = 0x07, |
| CMD_BOARD_ID_READ = 0x0e, |
| CMD_VERSION_STRING_READ = 0x0f, |
| CMD_SET_FREQ = 0x10, |
| CMD_AMP_ENABLE = 0x11, |
| CMD_SET_LNA_GAIN = 0x13, |
| CMD_SET_VGA_GAIN = 0x14, |
| CMD_SET_TXVGA_GAIN = 0x15, |
| }; |
| |
| /* |
| * bEndpointAddress 0x81 EP 1 IN |
| * Transfer Type Bulk |
| * wMaxPacketSize 0x0200 1x 512 bytes |
| */ |
| #define MAX_BULK_BUFS (6) |
| #define BULK_BUFFER_SIZE (128 * 512) |
| |
| static const struct v4l2_frequency_band bands_adc_dac[] = { |
| { |
| .tuner = 0, |
| .type = V4L2_TUNER_SDR, |
| .index = 0, |
| .capability = V4L2_TUNER_CAP_1HZ | V4L2_TUNER_CAP_FREQ_BANDS, |
| .rangelow = 200000, |
| .rangehigh = 24000000, |
| }, |
| }; |
| |
| static const struct v4l2_frequency_band bands_rx_tx[] = { |
| { |
| .tuner = 1, |
| .type = V4L2_TUNER_RF, |
| .index = 0, |
| .capability = V4L2_TUNER_CAP_1HZ | V4L2_TUNER_CAP_FREQ_BANDS, |
| .rangelow = 1, |
| .rangehigh = 4294967294LL, /* max u32, hw goes over 7GHz */ |
| }, |
| }; |
| |
| /* stream formats */ |
| struct hackrf_format { |
| u32 pixelformat; |
| u32 buffersize; |
| }; |
| |
| /* format descriptions for capture and preview */ |
| static struct hackrf_format formats[] = { |
| { |
| .pixelformat = V4L2_SDR_FMT_CS8, |
| .buffersize = BULK_BUFFER_SIZE, |
| }, |
| }; |
| |
| static const unsigned int NUM_FORMATS = ARRAY_SIZE(formats); |
| |
| /* intermediate buffers with raw data from the USB device */ |
| struct hackrf_buffer { |
| struct vb2_v4l2_buffer vb; |
| struct list_head list; |
| }; |
| |
| struct hackrf_dev { |
| #define USB_STATE_URB_BUF 1 /* XXX: set manually */ |
| #define RX_ON 4 |
| #define TX_ON 5 |
| #define RX_ADC_FREQUENCY 11 |
| #define TX_DAC_FREQUENCY 12 |
| #define RX_BANDWIDTH 13 |
| #define TX_BANDWIDTH 14 |
| #define RX_RF_FREQUENCY 15 |
| #define TX_RF_FREQUENCY 16 |
| #define RX_RF_GAIN 17 |
| #define TX_RF_GAIN 18 |
| #define RX_IF_GAIN 19 |
| #define RX_LNA_GAIN 20 |
| #define TX_LNA_GAIN 21 |
| unsigned long flags; |
| |
| struct usb_interface *intf; |
| struct device *dev; |
| struct usb_device *udev; |
| struct video_device rx_vdev; |
| struct video_device tx_vdev; |
| struct v4l2_device v4l2_dev; |
| |
| /* videobuf2 queue and queued buffers list */ |
| struct vb2_queue rx_vb2_queue; |
| struct vb2_queue tx_vb2_queue; |
| struct list_head rx_buffer_list; |
| struct list_head tx_buffer_list; |
| spinlock_t buffer_list_lock; /* Protects buffer_list */ |
| unsigned sequence; /* Buffer sequence counter */ |
| unsigned int vb_full; /* vb is full and packets dropped */ |
| unsigned int vb_empty; /* vb is empty and packets dropped */ |
| |
| /* Note if taking both locks v4l2_lock must always be locked first! */ |
| struct mutex v4l2_lock; /* Protects everything else */ |
| struct mutex vb_queue_lock; /* Protects vb_queue */ |
| |
| struct urb *urb_list[MAX_BULK_BUFS]; |
| int buf_num; |
| unsigned long buf_size; |
| u8 *buf_list[MAX_BULK_BUFS]; |
| dma_addr_t dma_addr[MAX_BULK_BUFS]; |
| int urbs_initialized; |
| int urbs_submitted; |
| |
| /* USB control message buffer */ |
| #define BUF_SIZE 24 |
| u8 buf[BUF_SIZE]; |
| |
| /* Current configuration */ |
| unsigned int f_adc; |
| unsigned int f_dac; |
| unsigned int f_rx; |
| unsigned int f_tx; |
| u32 pixelformat; |
| u32 buffersize; |
| |
| /* Controls */ |
| struct v4l2_ctrl_handler rx_ctrl_handler; |
| struct v4l2_ctrl *rx_bandwidth_auto; |
| struct v4l2_ctrl *rx_bandwidth; |
| struct v4l2_ctrl *rx_rf_gain; |
| struct v4l2_ctrl *rx_lna_gain; |
| struct v4l2_ctrl *rx_if_gain; |
| struct v4l2_ctrl_handler tx_ctrl_handler; |
| struct v4l2_ctrl *tx_bandwidth_auto; |
| struct v4l2_ctrl *tx_bandwidth; |
| struct v4l2_ctrl *tx_rf_gain; |
| struct v4l2_ctrl *tx_lna_gain; |
| |
| /* Sample rate calc */ |
| unsigned long jiffies_next; |
| unsigned int sample; |
| unsigned int sample_measured; |
| }; |
| |
| #define hackrf_dbg_usb_control_msg(_dev, _r, _t, _v, _i, _b, _l) { \ |
| char *_direction; \ |
| if (_t & USB_DIR_IN) \ |
| _direction = "<<<"; \ |
| else \ |
| _direction = ">>>"; \ |
| dev_dbg(_dev, "%02x %02x %02x %02x %02x %02x %02x %02x %s %*ph\n", \ |
| _t, _r, _v & 0xff, _v >> 8, _i & 0xff, \ |
| _i >> 8, _l & 0xff, _l >> 8, _direction, _l, _b); \ |
| } |
| |
| /* execute firmware command */ |
| static int hackrf_ctrl_msg(struct hackrf_dev *dev, u8 request, u16 value, |
| u16 index, u8 *data, u16 size) |
| { |
| int ret; |
| unsigned int pipe; |
| u8 requesttype; |
| |
| switch (request) { |
| case CMD_SET_TRANSCEIVER_MODE: |
| case CMD_SET_FREQ: |
| case CMD_AMP_ENABLE: |
| case CMD_SAMPLE_RATE_SET: |
| case CMD_BASEBAND_FILTER_BANDWIDTH_SET: |
| pipe = usb_sndctrlpipe(dev->udev, 0); |
| requesttype = (USB_TYPE_VENDOR | USB_DIR_OUT); |
| break; |
| case CMD_BOARD_ID_READ: |
| case CMD_VERSION_STRING_READ: |
| case CMD_SET_LNA_GAIN: |
| case CMD_SET_VGA_GAIN: |
| case CMD_SET_TXVGA_GAIN: |
| pipe = usb_rcvctrlpipe(dev->udev, 0); |
| requesttype = (USB_TYPE_VENDOR | USB_DIR_IN); |
| break; |
| default: |
| dev_err(dev->dev, "Unknown command %02x\n", request); |
| ret = -EINVAL; |
| goto err; |
| } |
| |
| /* write request */ |
| if (!(requesttype & USB_DIR_IN)) |
| memcpy(dev->buf, data, size); |
| |
| ret = usb_control_msg(dev->udev, pipe, request, requesttype, value, |
| index, dev->buf, size, 1000); |
| hackrf_dbg_usb_control_msg(dev->dev, request, requesttype, value, |
| index, dev->buf, size); |
| if (ret < 0) { |
| dev_err(dev->dev, "usb_control_msg() failed %d request %02x\n", |
| ret, request); |
| goto err; |
| } |
| |
| /* read request */ |
| if (requesttype & USB_DIR_IN) |
| memcpy(data, dev->buf, size); |
| |
| return 0; |
| err: |
| return ret; |
| } |
| |
| static int hackrf_set_params(struct hackrf_dev *dev) |
| { |
| struct usb_interface *intf = dev->intf; |
| int ret, i; |
| u8 buf[8], u8tmp; |
| unsigned int uitmp, uitmp1, uitmp2; |
| const bool rx = test_bit(RX_ON, &dev->flags); |
| const bool tx = test_bit(TX_ON, &dev->flags); |
| static const struct { |
| u32 freq; |
| } bandwidth_lut[] = { |
| { 1750000}, /* 1.75 MHz */ |
| { 2500000}, /* 2.5 MHz */ |
| { 3500000}, /* 3.5 MHz */ |
| { 5000000}, /* 5 MHz */ |
| { 5500000}, /* 5.5 MHz */ |
| { 6000000}, /* 6 MHz */ |
| { 7000000}, /* 7 MHz */ |
| { 8000000}, /* 8 MHz */ |
| { 9000000}, /* 9 MHz */ |
| {10000000}, /* 10 MHz */ |
| {12000000}, /* 12 MHz */ |
| {14000000}, /* 14 MHz */ |
| {15000000}, /* 15 MHz */ |
| {20000000}, /* 20 MHz */ |
| {24000000}, /* 24 MHz */ |
| {28000000}, /* 28 MHz */ |
| }; |
| |
| if (!rx && !tx) { |
| dev_dbg(&intf->dev, "device is sleeping\n"); |
| return 0; |
| } |
| |
| /* ADC / DAC frequency */ |
| if (rx && test_and_clear_bit(RX_ADC_FREQUENCY, &dev->flags)) { |
| dev_dbg(&intf->dev, "RX ADC frequency=%u Hz\n", dev->f_adc); |
| uitmp1 = dev->f_adc; |
| uitmp2 = 1; |
| set_bit(TX_DAC_FREQUENCY, &dev->flags); |
| } else if (tx && test_and_clear_bit(TX_DAC_FREQUENCY, &dev->flags)) { |
| dev_dbg(&intf->dev, "TX DAC frequency=%u Hz\n", dev->f_dac); |
| uitmp1 = dev->f_dac; |
| uitmp2 = 1; |
| set_bit(RX_ADC_FREQUENCY, &dev->flags); |
| } else { |
| uitmp1 = uitmp2 = 0; |
| } |
| if (uitmp1 || uitmp2) { |
| buf[0] = (uitmp1 >> 0) & 0xff; |
| buf[1] = (uitmp1 >> 8) & 0xff; |
| buf[2] = (uitmp1 >> 16) & 0xff; |
| buf[3] = (uitmp1 >> 24) & 0xff; |
| buf[4] = (uitmp2 >> 0) & 0xff; |
| buf[5] = (uitmp2 >> 8) & 0xff; |
| buf[6] = (uitmp2 >> 16) & 0xff; |
| buf[7] = (uitmp2 >> 24) & 0xff; |
| ret = hackrf_ctrl_msg(dev, CMD_SAMPLE_RATE_SET, 0, 0, buf, 8); |
| if (ret) |
| goto err; |
| } |
| |
| /* bandwidth */ |
| if (rx && test_and_clear_bit(RX_BANDWIDTH, &dev->flags)) { |
| if (dev->rx_bandwidth_auto->val == true) |
| uitmp = dev->f_adc; |
| else |
| uitmp = dev->rx_bandwidth->val; |
| |
| for (i = 0; i < ARRAY_SIZE(bandwidth_lut); i++) { |
| if (uitmp <= bandwidth_lut[i].freq) { |
| uitmp = bandwidth_lut[i].freq; |
| break; |
| } |
| } |
| dev->rx_bandwidth->val = uitmp; |
| dev->rx_bandwidth->cur.val = uitmp; |
| dev_dbg(&intf->dev, "RX bandwidth selected=%u\n", uitmp); |
| set_bit(TX_BANDWIDTH, &dev->flags); |
| } else if (tx && test_and_clear_bit(TX_BANDWIDTH, &dev->flags)) { |
| if (dev->tx_bandwidth_auto->val == true) |
| uitmp = dev->f_dac; |
| else |
| uitmp = dev->tx_bandwidth->val; |
| |
| for (i = 0; i < ARRAY_SIZE(bandwidth_lut); i++) { |
| if (uitmp <= bandwidth_lut[i].freq) { |
| uitmp = bandwidth_lut[i].freq; |
| break; |
| } |
| } |
| dev->tx_bandwidth->val = uitmp; |
| dev->tx_bandwidth->cur.val = uitmp; |
| dev_dbg(&intf->dev, "TX bandwidth selected=%u\n", uitmp); |
| set_bit(RX_BANDWIDTH, &dev->flags); |
| } else { |
| uitmp = 0; |
| } |
| if (uitmp) { |
| uitmp1 = uitmp2 = 0; |
| uitmp1 |= ((uitmp >> 0) & 0xff) << 0; |
| uitmp1 |= ((uitmp >> 8) & 0xff) << 8; |
| uitmp2 |= ((uitmp >> 16) & 0xff) << 0; |
| uitmp2 |= ((uitmp >> 24) & 0xff) << 8; |
| ret = hackrf_ctrl_msg(dev, CMD_BASEBAND_FILTER_BANDWIDTH_SET, |
| uitmp1, uitmp2, NULL, 0); |
| if (ret) |
| goto err; |
| } |
| |
| /* RX / TX RF frequency */ |
| if (rx && test_and_clear_bit(RX_RF_FREQUENCY, &dev->flags)) { |
| dev_dbg(&intf->dev, "RX RF frequency=%u Hz\n", dev->f_rx); |
| uitmp1 = dev->f_rx / 1000000; |
| uitmp2 = dev->f_rx % 1000000; |
| set_bit(TX_RF_FREQUENCY, &dev->flags); |
| } else if (tx && test_and_clear_bit(TX_RF_FREQUENCY, &dev->flags)) { |
| dev_dbg(&intf->dev, "TX RF frequency=%u Hz\n", dev->f_tx); |
| uitmp1 = dev->f_tx / 1000000; |
| uitmp2 = dev->f_tx % 1000000; |
| set_bit(RX_RF_FREQUENCY, &dev->flags); |
| } else { |
| uitmp1 = uitmp2 = 0; |
| } |
| if (uitmp1 || uitmp2) { |
| buf[0] = (uitmp1 >> 0) & 0xff; |
| buf[1] = (uitmp1 >> 8) & 0xff; |
| buf[2] = (uitmp1 >> 16) & 0xff; |
| buf[3] = (uitmp1 >> 24) & 0xff; |
| buf[4] = (uitmp2 >> 0) & 0xff; |
| buf[5] = (uitmp2 >> 8) & 0xff; |
| buf[6] = (uitmp2 >> 16) & 0xff; |
| buf[7] = (uitmp2 >> 24) & 0xff; |
| ret = hackrf_ctrl_msg(dev, CMD_SET_FREQ, 0, 0, buf, 8); |
| if (ret) |
| goto err; |
| } |
| |
| /* RX RF gain */ |
| if (rx && test_and_clear_bit(RX_RF_GAIN, &dev->flags)) { |
| dev_dbg(&intf->dev, "RX RF gain val=%d->%d\n", |
| dev->rx_rf_gain->cur.val, dev->rx_rf_gain->val); |
| |
| u8tmp = (dev->rx_rf_gain->val) ? 1 : 0; |
| ret = hackrf_ctrl_msg(dev, CMD_AMP_ENABLE, u8tmp, 0, NULL, 0); |
| if (ret) |
| goto err; |
| set_bit(TX_RF_GAIN, &dev->flags); |
| } |
| |
| /* TX RF gain */ |
| if (tx && test_and_clear_bit(TX_RF_GAIN, &dev->flags)) { |
| dev_dbg(&intf->dev, "TX RF gain val=%d->%d\n", |
| dev->tx_rf_gain->cur.val, dev->tx_rf_gain->val); |
| |
| u8tmp = (dev->tx_rf_gain->val) ? 1 : 0; |
| ret = hackrf_ctrl_msg(dev, CMD_AMP_ENABLE, u8tmp, 0, NULL, 0); |
| if (ret) |
| goto err; |
| set_bit(RX_RF_GAIN, &dev->flags); |
| } |
| |
| /* RX LNA gain */ |
| if (rx && test_and_clear_bit(RX_LNA_GAIN, &dev->flags)) { |
| dev_dbg(dev->dev, "RX LNA gain val=%d->%d\n", |
| dev->rx_lna_gain->cur.val, dev->rx_lna_gain->val); |
| |
| ret = hackrf_ctrl_msg(dev, CMD_SET_LNA_GAIN, 0, |
| dev->rx_lna_gain->val, &u8tmp, 1); |
| if (ret) |
| goto err; |
| } |
| |
| /* RX IF gain */ |
| if (rx && test_and_clear_bit(RX_IF_GAIN, &dev->flags)) { |
| dev_dbg(&intf->dev, "IF gain val=%d->%d\n", |
| dev->rx_if_gain->cur.val, dev->rx_if_gain->val); |
| |
| ret = hackrf_ctrl_msg(dev, CMD_SET_VGA_GAIN, 0, |
| dev->rx_if_gain->val, &u8tmp, 1); |
| if (ret) |
| goto err; |
| } |
| |
| /* TX LNA gain */ |
| if (tx && test_and_clear_bit(TX_LNA_GAIN, &dev->flags)) { |
| dev_dbg(&intf->dev, "TX LNA gain val=%d->%d\n", |
| dev->tx_lna_gain->cur.val, dev->tx_lna_gain->val); |
| |
| ret = hackrf_ctrl_msg(dev, CMD_SET_TXVGA_GAIN, 0, |
| dev->tx_lna_gain->val, &u8tmp, 1); |
| if (ret) |
| goto err; |
| } |
| |
| return 0; |
| err: |
| dev_dbg(&intf->dev, "failed=%d\n", ret); |
| return ret; |
| } |
| |
| /* Private functions */ |
| static struct hackrf_buffer *hackrf_get_next_buffer(struct hackrf_dev *dev, |
| struct list_head *buffer_list) |
| { |
| unsigned long flags; |
| struct hackrf_buffer *buffer = NULL; |
| |
| spin_lock_irqsave(&dev->buffer_list_lock, flags); |
| if (list_empty(buffer_list)) |
| goto leave; |
| |
| buffer = list_entry(buffer_list->next, struct hackrf_buffer, list); |
| list_del(&buffer->list); |
| leave: |
| spin_unlock_irqrestore(&dev->buffer_list_lock, flags); |
| return buffer; |
| } |
| |
| static void hackrf_copy_stream(struct hackrf_dev *dev, void *dst, void *src, |
| unsigned int src_len) |
| { |
| memcpy(dst, src, src_len); |
| |
| /* calculate sample rate and output it in 10 seconds intervals */ |
| if (unlikely(time_is_before_jiffies(dev->jiffies_next))) { |
| #define MSECS 10000UL |
| unsigned int msecs = jiffies_to_msecs(jiffies - |
| dev->jiffies_next + msecs_to_jiffies(MSECS)); |
| unsigned int samples = dev->sample - dev->sample_measured; |
| |
| dev->jiffies_next = jiffies + msecs_to_jiffies(MSECS); |
| dev->sample_measured = dev->sample; |
| dev_dbg(dev->dev, "slen=%u samples=%u msecs=%u sample rate=%lu\n", |
| src_len, samples, msecs, |
| samples * 1000UL / msecs); |
| } |
| |
| /* total number of samples */ |
| dev->sample += src_len / 2; |
| } |
| |
| /* |
| * This gets called for the bulk stream pipe. This is done in interrupt |
| * time, so it has to be fast, not crash, and not stall. Neat. |
| */ |
| static void hackrf_urb_complete_in(struct urb *urb) |
| { |
| struct hackrf_dev *dev = urb->context; |
| struct usb_interface *intf = dev->intf; |
| struct hackrf_buffer *buffer; |
| unsigned int len; |
| |
| dev_dbg_ratelimited(&intf->dev, "status=%d length=%u/%u\n", urb->status, |
| urb->actual_length, urb->transfer_buffer_length); |
| |
| switch (urb->status) { |
| case 0: /* success */ |
| case -ETIMEDOUT: /* NAK */ |
| break; |
| case -ECONNRESET: /* kill */ |
| case -ENOENT: |
| case -ESHUTDOWN: |
| return; |
| default: /* error */ |
| dev_err_ratelimited(&intf->dev, "URB failed %d\n", urb->status); |
| goto exit_usb_submit_urb; |
| } |
| |
| /* get buffer to write */ |
| buffer = hackrf_get_next_buffer(dev, &dev->rx_buffer_list); |
| if (unlikely(buffer == NULL)) { |
| dev->vb_full++; |
| dev_notice_ratelimited(&intf->dev, |
| "buffer is full - %u packets dropped\n", |
| dev->vb_full); |
| goto exit_usb_submit_urb; |
| } |
| |
| len = min_t(unsigned long, vb2_plane_size(&buffer->vb.vb2_buf, 0), |
| urb->actual_length); |
| hackrf_copy_stream(dev, vb2_plane_vaddr(&buffer->vb.vb2_buf, 0), |
| urb->transfer_buffer, len); |
| vb2_set_plane_payload(&buffer->vb.vb2_buf, 0, len); |
| buffer->vb.sequence = dev->sequence++; |
| v4l2_get_timestamp(&buffer->vb.timestamp); |
| vb2_buffer_done(&buffer->vb.vb2_buf, VB2_BUF_STATE_DONE); |
| exit_usb_submit_urb: |
| usb_submit_urb(urb, GFP_ATOMIC); |
| } |
| |
| static void hackrf_urb_complete_out(struct urb *urb) |
| { |
| struct hackrf_dev *dev = urb->context; |
| struct usb_interface *intf = dev->intf; |
| struct hackrf_buffer *buffer; |
| unsigned int len; |
| |
| dev_dbg_ratelimited(&intf->dev, "status=%d length=%u/%u\n", urb->status, |
| urb->actual_length, urb->transfer_buffer_length); |
| |
| switch (urb->status) { |
| case 0: /* success */ |
| case -ETIMEDOUT: /* NAK */ |
| break; |
| case -ECONNRESET: /* kill */ |
| case -ENOENT: |
| case -ESHUTDOWN: |
| return; |
| default: /* error */ |
| dev_err_ratelimited(&intf->dev, "URB failed %d\n", urb->status); |
| } |
| |
| /* get buffer to read */ |
| buffer = hackrf_get_next_buffer(dev, &dev->tx_buffer_list); |
| if (unlikely(buffer == NULL)) { |
| dev->vb_empty++; |
| dev_notice_ratelimited(&intf->dev, |
| "buffer is empty - %u packets dropped\n", |
| dev->vb_empty); |
| urb->actual_length = 0; |
| goto exit_usb_submit_urb; |
| } |
| |
| len = min_t(unsigned long, urb->transfer_buffer_length, |
| vb2_get_plane_payload(&buffer->vb.vb2_buf, 0)); |
| hackrf_copy_stream(dev, urb->transfer_buffer, |
| vb2_plane_vaddr(&buffer->vb.vb2_buf, 0), len); |
| urb->actual_length = len; |
| buffer->vb.sequence = dev->sequence++; |
| v4l2_get_timestamp(&buffer->vb.timestamp); |
| vb2_buffer_done(&buffer->vb.vb2_buf, VB2_BUF_STATE_DONE); |
| exit_usb_submit_urb: |
| usb_submit_urb(urb, GFP_ATOMIC); |
| } |
| |
| static int hackrf_kill_urbs(struct hackrf_dev *dev) |
| { |
| int i; |
| |
| for (i = dev->urbs_submitted - 1; i >= 0; i--) { |
| dev_dbg(dev->dev, "kill urb=%d\n", i); |
| /* stop the URB */ |
| usb_kill_urb(dev->urb_list[i]); |
| } |
| dev->urbs_submitted = 0; |
| |
| return 0; |
| } |
| |
| static int hackrf_submit_urbs(struct hackrf_dev *dev) |
| { |
| int i, ret; |
| |
| for (i = 0; i < dev->urbs_initialized; i++) { |
| dev_dbg(dev->dev, "submit urb=%d\n", i); |
| ret = usb_submit_urb(dev->urb_list[i], GFP_ATOMIC); |
| if (ret) { |
| dev_err(dev->dev, "Could not submit URB no. %d - get them all back\n", |
| i); |
| hackrf_kill_urbs(dev); |
| return ret; |
| } |
| dev->urbs_submitted++; |
| } |
| |
| return 0; |
| } |
| |
| static int hackrf_free_stream_bufs(struct hackrf_dev *dev) |
| { |
| if (dev->flags & USB_STATE_URB_BUF) { |
| while (dev->buf_num) { |
| dev->buf_num--; |
| dev_dbg(dev->dev, "free buf=%d\n", dev->buf_num); |
| usb_free_coherent(dev->udev, dev->buf_size, |
| dev->buf_list[dev->buf_num], |
| dev->dma_addr[dev->buf_num]); |
| } |
| } |
| dev->flags &= ~USB_STATE_URB_BUF; |
| |
| return 0; |
| } |
| |
| static int hackrf_alloc_stream_bufs(struct hackrf_dev *dev) |
| { |
| dev->buf_num = 0; |
| dev->buf_size = BULK_BUFFER_SIZE; |
| |
| dev_dbg(dev->dev, "all in all I will use %u bytes for streaming\n", |
| MAX_BULK_BUFS * BULK_BUFFER_SIZE); |
| |
| for (dev->buf_num = 0; dev->buf_num < MAX_BULK_BUFS; dev->buf_num++) { |
| dev->buf_list[dev->buf_num] = usb_alloc_coherent(dev->udev, |
| BULK_BUFFER_SIZE, GFP_ATOMIC, |
| &dev->dma_addr[dev->buf_num]); |
| if (!dev->buf_list[dev->buf_num]) { |
| dev_dbg(dev->dev, "alloc buf=%d failed\n", |
| dev->buf_num); |
| hackrf_free_stream_bufs(dev); |
| return -ENOMEM; |
| } |
| |
| dev_dbg(dev->dev, "alloc buf=%d %p (dma %llu)\n", dev->buf_num, |
| dev->buf_list[dev->buf_num], |
| (long long)dev->dma_addr[dev->buf_num]); |
| dev->flags |= USB_STATE_URB_BUF; |
| } |
| |
| return 0; |
| } |
| |
| static int hackrf_free_urbs(struct hackrf_dev *dev) |
| { |
| int i; |
| |
| hackrf_kill_urbs(dev); |
| |
| for (i = dev->urbs_initialized - 1; i >= 0; i--) { |
| if (dev->urb_list[i]) { |
| dev_dbg(dev->dev, "free urb=%d\n", i); |
| /* free the URBs */ |
| usb_free_urb(dev->urb_list[i]); |
| } |
| } |
| dev->urbs_initialized = 0; |
| |
| return 0; |
| } |
| |
| static int hackrf_alloc_urbs(struct hackrf_dev *dev, bool rcv) |
| { |
| int i, j; |
| unsigned int pipe; |
| usb_complete_t complete; |
| |
| if (rcv) { |
| pipe = usb_rcvbulkpipe(dev->udev, 0x81); |
| complete = &hackrf_urb_complete_in; |
| } else { |
| pipe = usb_sndbulkpipe(dev->udev, 0x02); |
| complete = &hackrf_urb_complete_out; |
| } |
| |
| /* allocate the URBs */ |
| for (i = 0; i < MAX_BULK_BUFS; i++) { |
| dev_dbg(dev->dev, "alloc urb=%d\n", i); |
| dev->urb_list[i] = usb_alloc_urb(0, GFP_ATOMIC); |
| if (!dev->urb_list[i]) { |
| dev_dbg(dev->dev, "failed\n"); |
| for (j = 0; j < i; j++) |
| usb_free_urb(dev->urb_list[j]); |
| return -ENOMEM; |
| } |
| usb_fill_bulk_urb(dev->urb_list[i], |
| dev->udev, |
| pipe, |
| dev->buf_list[i], |
| BULK_BUFFER_SIZE, |
| complete, dev); |
| |
| dev->urb_list[i]->transfer_flags = URB_NO_TRANSFER_DMA_MAP; |
| dev->urb_list[i]->transfer_dma = dev->dma_addr[i]; |
| dev->urbs_initialized++; |
| } |
| |
| return 0; |
| } |
| |
| /* The user yanked out the cable... */ |
| static void hackrf_disconnect(struct usb_interface *intf) |
| { |
| struct v4l2_device *v = usb_get_intfdata(intf); |
| struct hackrf_dev *dev = container_of(v, struct hackrf_dev, v4l2_dev); |
| |
| dev_dbg(dev->dev, "\n"); |
| |
| mutex_lock(&dev->vb_queue_lock); |
| mutex_lock(&dev->v4l2_lock); |
| /* No need to keep the urbs around after disconnection */ |
| dev->udev = NULL; |
| v4l2_device_disconnect(&dev->v4l2_dev); |
| video_unregister_device(&dev->tx_vdev); |
| video_unregister_device(&dev->rx_vdev); |
| mutex_unlock(&dev->v4l2_lock); |
| mutex_unlock(&dev->vb_queue_lock); |
| |
| v4l2_device_put(&dev->v4l2_dev); |
| } |
| |
| /* Videobuf2 operations */ |
| static void hackrf_return_all_buffers(struct vb2_queue *vq, |
| enum vb2_buffer_state state) |
| { |
| struct hackrf_dev *dev = vb2_get_drv_priv(vq); |
| struct usb_interface *intf = dev->intf; |
| struct hackrf_buffer *buffer, *node; |
| struct list_head *buffer_list; |
| unsigned long flags; |
| |
| dev_dbg(&intf->dev, "\n"); |
| |
| if (vq->type == V4L2_BUF_TYPE_SDR_CAPTURE) |
| buffer_list = &dev->rx_buffer_list; |
| else |
| buffer_list = &dev->tx_buffer_list; |
| |
| spin_lock_irqsave(&dev->buffer_list_lock, flags); |
| list_for_each_entry_safe(buffer, node, buffer_list, list) { |
| dev_dbg(&intf->dev, "list_for_each_entry_safe\n"); |
| vb2_buffer_done(&buffer->vb.vb2_buf, state); |
| list_del(&buffer->list); |
| } |
| spin_unlock_irqrestore(&dev->buffer_list_lock, flags); |
| } |
| |
| static int hackrf_queue_setup(struct vb2_queue *vq, |
| const void *parg, unsigned int *nbuffers, |
| unsigned int *nplanes, unsigned int sizes[], void *alloc_ctxs[]) |
| { |
| struct hackrf_dev *dev = vb2_get_drv_priv(vq); |
| |
| dev_dbg(dev->dev, "nbuffers=%d\n", *nbuffers); |
| |
| /* Need at least 8 buffers */ |
| if (vq->num_buffers + *nbuffers < 8) |
| *nbuffers = 8 - vq->num_buffers; |
| *nplanes = 1; |
| sizes[0] = PAGE_ALIGN(dev->buffersize); |
| |
| dev_dbg(dev->dev, "nbuffers=%d sizes[0]=%d\n", *nbuffers, sizes[0]); |
| return 0; |
| } |
| |
| static void hackrf_buf_queue(struct vb2_buffer *vb) |
| { |
| struct vb2_v4l2_buffer *vbuf = to_vb2_v4l2_buffer(vb); |
| struct vb2_queue *vq = vb->vb2_queue; |
| struct hackrf_dev *dev = vb2_get_drv_priv(vq); |
| struct hackrf_buffer *buffer = container_of(vbuf, struct hackrf_buffer, vb); |
| struct list_head *buffer_list; |
| unsigned long flags; |
| |
| dev_dbg_ratelimited(&dev->intf->dev, "\n"); |
| |
| if (vq->type == V4L2_BUF_TYPE_SDR_CAPTURE) |
| buffer_list = &dev->rx_buffer_list; |
| else |
| buffer_list = &dev->tx_buffer_list; |
| |
| spin_lock_irqsave(&dev->buffer_list_lock, flags); |
| list_add_tail(&buffer->list, buffer_list); |
| spin_unlock_irqrestore(&dev->buffer_list_lock, flags); |
| } |
| |
| static int hackrf_start_streaming(struct vb2_queue *vq, unsigned int count) |
| { |
| struct hackrf_dev *dev = vb2_get_drv_priv(vq); |
| struct usb_interface *intf = dev->intf; |
| int ret; |
| unsigned int mode; |
| |
| dev_dbg(&intf->dev, "count=%i\n", count); |
| |
| mutex_lock(&dev->v4l2_lock); |
| |
| /* Allow only RX or TX, not both same time */ |
| if (vq->type == V4L2_BUF_TYPE_SDR_CAPTURE) { |
| if (test_bit(TX_ON, &dev->flags)) { |
| ret = -EBUSY; |
| goto err_hackrf_return_all_buffers; |
| } |
| |
| mode = 1; |
| set_bit(RX_ON, &dev->flags); |
| } else { |
| if (test_bit(RX_ON, &dev->flags)) { |
| ret = -EBUSY; |
| goto err_hackrf_return_all_buffers; |
| } |
| |
| mode = 2; |
| set_bit(TX_ON, &dev->flags); |
| } |
| |
| dev->sequence = 0; |
| |
| ret = hackrf_alloc_stream_bufs(dev); |
| if (ret) |
| goto err; |
| |
| ret = hackrf_alloc_urbs(dev, (mode == 1)); |
| if (ret) |
| goto err; |
| |
| ret = hackrf_submit_urbs(dev); |
| if (ret) |
| goto err; |
| |
| ret = hackrf_set_params(dev); |
| if (ret) |
| goto err; |
| |
| /* start hardware streaming */ |
| ret = hackrf_ctrl_msg(dev, CMD_SET_TRANSCEIVER_MODE, mode, 0, NULL, 0); |
| if (ret) |
| goto err; |
| |
| mutex_unlock(&dev->v4l2_lock); |
| |
| return 0; |
| err: |
| hackrf_kill_urbs(dev); |
| hackrf_free_urbs(dev); |
| hackrf_free_stream_bufs(dev); |
| clear_bit(RX_ON, &dev->flags); |
| clear_bit(TX_ON, &dev->flags); |
| err_hackrf_return_all_buffers: |
| hackrf_return_all_buffers(vq, VB2_BUF_STATE_QUEUED); |
| mutex_unlock(&dev->v4l2_lock); |
| dev_dbg(&intf->dev, "failed=%d\n", ret); |
| return ret; |
| } |
| |
| static void hackrf_stop_streaming(struct vb2_queue *vq) |
| { |
| struct hackrf_dev *dev = vb2_get_drv_priv(vq); |
| struct usb_interface *intf = dev->intf; |
| |
| dev_dbg(&intf->dev, "\n"); |
| |
| mutex_lock(&dev->v4l2_lock); |
| |
| /* stop hardware streaming */ |
| hackrf_ctrl_msg(dev, CMD_SET_TRANSCEIVER_MODE, 0, 0, NULL, 0); |
| |
| hackrf_kill_urbs(dev); |
| hackrf_free_urbs(dev); |
| hackrf_free_stream_bufs(dev); |
| |
| hackrf_return_all_buffers(vq, VB2_BUF_STATE_ERROR); |
| |
| if (vq->type == V4L2_BUF_TYPE_SDR_CAPTURE) |
| clear_bit(RX_ON, &dev->flags); |
| else |
| clear_bit(TX_ON, &dev->flags); |
| |
| mutex_unlock(&dev->v4l2_lock); |
| } |
| |
| static struct vb2_ops hackrf_vb2_ops = { |
| .queue_setup = hackrf_queue_setup, |
| .buf_queue = hackrf_buf_queue, |
| .start_streaming = hackrf_start_streaming, |
| .stop_streaming = hackrf_stop_streaming, |
| .wait_prepare = vb2_ops_wait_prepare, |
| .wait_finish = vb2_ops_wait_finish, |
| }; |
| |
| static int hackrf_querycap(struct file *file, void *fh, |
| struct v4l2_capability *cap) |
| { |
| struct hackrf_dev *dev = video_drvdata(file); |
| struct usb_interface *intf = dev->intf; |
| struct video_device *vdev = video_devdata(file); |
| |
| dev_dbg(&intf->dev, "\n"); |
| |
| if (vdev->vfl_dir == VFL_DIR_RX) |
| cap->device_caps = V4L2_CAP_SDR_CAPTURE | V4L2_CAP_TUNER | |
| V4L2_CAP_STREAMING | V4L2_CAP_READWRITE; |
| |
| else |
| cap->device_caps = V4L2_CAP_SDR_OUTPUT | V4L2_CAP_MODULATOR | |
| V4L2_CAP_STREAMING | V4L2_CAP_READWRITE; |
| |
| cap->capabilities = V4L2_CAP_SDR_CAPTURE | V4L2_CAP_TUNER | |
| V4L2_CAP_SDR_OUTPUT | V4L2_CAP_MODULATOR | |
| V4L2_CAP_STREAMING | V4L2_CAP_READWRITE | |
| V4L2_CAP_DEVICE_CAPS; |
| strlcpy(cap->driver, KBUILD_MODNAME, sizeof(cap->driver)); |
| strlcpy(cap->card, dev->rx_vdev.name, sizeof(cap->card)); |
| usb_make_path(dev->udev, cap->bus_info, sizeof(cap->bus_info)); |
| |
| return 0; |
| } |
| |
| static int hackrf_s_fmt_sdr(struct file *file, void *priv, |
| struct v4l2_format *f) |
| { |
| struct hackrf_dev *dev = video_drvdata(file); |
| struct video_device *vdev = video_devdata(file); |
| struct vb2_queue *q; |
| int i; |
| |
| dev_dbg(dev->dev, "pixelformat fourcc %4.4s\n", |
| (char *)&f->fmt.sdr.pixelformat); |
| |
| if (vdev->vfl_dir == VFL_DIR_RX) |
| q = &dev->rx_vb2_queue; |
| else |
| q = &dev->tx_vb2_queue; |
| |
| if (vb2_is_busy(q)) |
| return -EBUSY; |
| |
| memset(f->fmt.sdr.reserved, 0, sizeof(f->fmt.sdr.reserved)); |
| for (i = 0; i < NUM_FORMATS; i++) { |
| if (f->fmt.sdr.pixelformat == formats[i].pixelformat) { |
| dev->pixelformat = formats[i].pixelformat; |
| dev->buffersize = formats[i].buffersize; |
| f->fmt.sdr.buffersize = formats[i].buffersize; |
| return 0; |
| } |
| } |
| |
| dev->pixelformat = formats[0].pixelformat; |
| dev->buffersize = formats[0].buffersize; |
| f->fmt.sdr.pixelformat = formats[0].pixelformat; |
| f->fmt.sdr.buffersize = formats[0].buffersize; |
| |
| return 0; |
| } |
| |
| static int hackrf_g_fmt_sdr(struct file *file, void *priv, |
| struct v4l2_format *f) |
| { |
| struct hackrf_dev *dev = video_drvdata(file); |
| |
| dev_dbg(dev->dev, "pixelformat fourcc %4.4s\n", |
| (char *)&dev->pixelformat); |
| |
| memset(f->fmt.sdr.reserved, 0, sizeof(f->fmt.sdr.reserved)); |
| f->fmt.sdr.pixelformat = dev->pixelformat; |
| f->fmt.sdr.buffersize = dev->buffersize; |
| |
| return 0; |
| } |
| |
| static int hackrf_try_fmt_sdr(struct file *file, void *priv, |
| struct v4l2_format *f) |
| { |
| struct hackrf_dev *dev = video_drvdata(file); |
| int i; |
| |
| dev_dbg(dev->dev, "pixelformat fourcc %4.4s\n", |
| (char *)&f->fmt.sdr.pixelformat); |
| |
| memset(f->fmt.sdr.reserved, 0, sizeof(f->fmt.sdr.reserved)); |
| for (i = 0; i < NUM_FORMATS; i++) { |
| if (formats[i].pixelformat == f->fmt.sdr.pixelformat) { |
| f->fmt.sdr.buffersize = formats[i].buffersize; |
| return 0; |
| } |
| } |
| |
| f->fmt.sdr.pixelformat = formats[0].pixelformat; |
| f->fmt.sdr.buffersize = formats[0].buffersize; |
| |
| return 0; |
| } |
| |
| static int hackrf_enum_fmt_sdr(struct file *file, void *priv, |
| struct v4l2_fmtdesc *f) |
| { |
| struct hackrf_dev *dev = video_drvdata(file); |
| |
| dev_dbg(dev->dev, "index=%d\n", f->index); |
| |
| if (f->index >= NUM_FORMATS) |
| return -EINVAL; |
| |
| f->pixelformat = formats[f->index].pixelformat; |
| |
| return 0; |
| } |
| |
| static int hackrf_s_tuner(struct file *file, void *priv, |
| const struct v4l2_tuner *v) |
| { |
| struct hackrf_dev *dev = video_drvdata(file); |
| int ret; |
| |
| dev_dbg(dev->dev, "index=%d\n", v->index); |
| |
| if (v->index == 0) |
| ret = 0; |
| else if (v->index == 1) |
| ret = 0; |
| else |
| ret = -EINVAL; |
| |
| return ret; |
| } |
| |
| static int hackrf_g_tuner(struct file *file, void *priv, struct v4l2_tuner *v) |
| { |
| struct hackrf_dev *dev = video_drvdata(file); |
| int ret; |
| |
| dev_dbg(dev->dev, "index=%d\n", v->index); |
| |
| if (v->index == 0) { |
| strlcpy(v->name, "HackRF ADC", sizeof(v->name)); |
| v->type = V4L2_TUNER_SDR; |
| v->capability = V4L2_TUNER_CAP_1HZ | V4L2_TUNER_CAP_FREQ_BANDS; |
| v->rangelow = bands_adc_dac[0].rangelow; |
| v->rangehigh = bands_adc_dac[0].rangehigh; |
| ret = 0; |
| } else if (v->index == 1) { |
| strlcpy(v->name, "HackRF RF", sizeof(v->name)); |
| v->type = V4L2_TUNER_RF; |
| v->capability = V4L2_TUNER_CAP_1HZ | V4L2_TUNER_CAP_FREQ_BANDS; |
| v->rangelow = bands_rx_tx[0].rangelow; |
| v->rangehigh = bands_rx_tx[0].rangehigh; |
| ret = 0; |
| } else { |
| ret = -EINVAL; |
| } |
| |
| return ret; |
| } |
| |
| static int hackrf_s_modulator(struct file *file, void *fh, |
| const struct v4l2_modulator *a) |
| { |
| struct hackrf_dev *dev = video_drvdata(file); |
| |
| dev_dbg(dev->dev, "index=%d\n", a->index); |
| |
| return a->index > 1 ? -EINVAL : 0; |
| } |
| |
| static int hackrf_g_modulator(struct file *file, void *fh, |
| struct v4l2_modulator *a) |
| { |
| struct hackrf_dev *dev = video_drvdata(file); |
| int ret; |
| |
| dev_dbg(dev->dev, "index=%d\n", a->index); |
| |
| if (a->index == 0) { |
| strlcpy(a->name, "HackRF DAC", sizeof(a->name)); |
| a->type = V4L2_TUNER_SDR; |
| a->capability = V4L2_TUNER_CAP_1HZ | V4L2_TUNER_CAP_FREQ_BANDS; |
| a->rangelow = bands_adc_dac[0].rangelow; |
| a->rangehigh = bands_adc_dac[0].rangehigh; |
| ret = 0; |
| } else if (a->index == 1) { |
| strlcpy(a->name, "HackRF RF", sizeof(a->name)); |
| a->type = V4L2_TUNER_RF; |
| a->capability = V4L2_TUNER_CAP_1HZ | V4L2_TUNER_CAP_FREQ_BANDS; |
| a->rangelow = bands_rx_tx[0].rangelow; |
| a->rangehigh = bands_rx_tx[0].rangehigh; |
| ret = 0; |
| } else { |
| ret = -EINVAL; |
| } |
| |
| return ret; |
| } |
| |
| static int hackrf_s_frequency(struct file *file, void *priv, |
| const struct v4l2_frequency *f) |
| { |
| struct hackrf_dev *dev = video_drvdata(file); |
| struct usb_interface *intf = dev->intf; |
| struct video_device *vdev = video_devdata(file); |
| int ret; |
| unsigned int uitmp; |
| |
| dev_dbg(&intf->dev, "tuner=%d type=%d frequency=%u\n", |
| f->tuner, f->type, f->frequency); |
| |
| if (f->tuner == 0) { |
| uitmp = clamp(f->frequency, bands_adc_dac[0].rangelow, |
| bands_adc_dac[0].rangehigh); |
| if (vdev->vfl_dir == VFL_DIR_RX) { |
| dev->f_adc = uitmp; |
| set_bit(RX_ADC_FREQUENCY, &dev->flags); |
| } else { |
| dev->f_dac = uitmp; |
| set_bit(TX_DAC_FREQUENCY, &dev->flags); |
| } |
| } else if (f->tuner == 1) { |
| uitmp = clamp(f->frequency, bands_rx_tx[0].rangelow, |
| bands_rx_tx[0].rangehigh); |
| if (vdev->vfl_dir == VFL_DIR_RX) { |
| dev->f_rx = uitmp; |
| set_bit(RX_RF_FREQUENCY, &dev->flags); |
| } else { |
| dev->f_tx = uitmp; |
| set_bit(TX_RF_FREQUENCY, &dev->flags); |
| } |
| } else { |
| ret = -EINVAL; |
| goto err; |
| } |
| |
| ret = hackrf_set_params(dev); |
| if (ret) |
| goto err; |
| |
| return 0; |
| err: |
| dev_dbg(&intf->dev, "failed=%d\n", ret); |
| return ret; |
| } |
| |
| static int hackrf_g_frequency(struct file *file, void *priv, |
| struct v4l2_frequency *f) |
| { |
| struct hackrf_dev *dev = video_drvdata(file); |
| struct usb_interface *intf = dev->intf; |
| struct video_device *vdev = video_devdata(file); |
| int ret; |
| |
| dev_dbg(dev->dev, "tuner=%d type=%d\n", f->tuner, f->type); |
| |
| if (f->tuner == 0) { |
| f->type = V4L2_TUNER_SDR; |
| if (vdev->vfl_dir == VFL_DIR_RX) |
| f->frequency = dev->f_adc; |
| else |
| f->frequency = dev->f_dac; |
| } else if (f->tuner == 1) { |
| f->type = V4L2_TUNER_RF; |
| if (vdev->vfl_dir == VFL_DIR_RX) |
| f->frequency = dev->f_rx; |
| else |
| f->frequency = dev->f_tx; |
| } else { |
| ret = -EINVAL; |
| goto err; |
| } |
| |
| return 0; |
| err: |
| dev_dbg(&intf->dev, "failed=%d\n", ret); |
| return ret; |
| } |
| |
| static int hackrf_enum_freq_bands(struct file *file, void *priv, |
| struct v4l2_frequency_band *band) |
| { |
| struct hackrf_dev *dev = video_drvdata(file); |
| int ret; |
| |
| dev_dbg(dev->dev, "tuner=%d type=%d index=%d\n", |
| band->tuner, band->type, band->index); |
| |
| if (band->tuner == 0) { |
| if (band->index >= ARRAY_SIZE(bands_adc_dac)) { |
| ret = -EINVAL; |
| } else { |
| *band = bands_adc_dac[band->index]; |
| ret = 0; |
| } |
| } else if (band->tuner == 1) { |
| if (band->index >= ARRAY_SIZE(bands_rx_tx)) { |
| ret = -EINVAL; |
| } else { |
| *band = bands_rx_tx[band->index]; |
| ret = 0; |
| } |
| } else { |
| ret = -EINVAL; |
| } |
| |
| return ret; |
| } |
| |
| static const struct v4l2_ioctl_ops hackrf_ioctl_ops = { |
| .vidioc_querycap = hackrf_querycap, |
| |
| .vidioc_s_fmt_sdr_cap = hackrf_s_fmt_sdr, |
| .vidioc_g_fmt_sdr_cap = hackrf_g_fmt_sdr, |
| .vidioc_enum_fmt_sdr_cap = hackrf_enum_fmt_sdr, |
| .vidioc_try_fmt_sdr_cap = hackrf_try_fmt_sdr, |
| |
| .vidioc_s_fmt_sdr_out = hackrf_s_fmt_sdr, |
| .vidioc_g_fmt_sdr_out = hackrf_g_fmt_sdr, |
| .vidioc_enum_fmt_sdr_out = hackrf_enum_fmt_sdr, |
| .vidioc_try_fmt_sdr_out = hackrf_try_fmt_sdr, |
| |
| .vidioc_reqbufs = vb2_ioctl_reqbufs, |
| .vidioc_create_bufs = vb2_ioctl_create_bufs, |
| .vidioc_prepare_buf = vb2_ioctl_prepare_buf, |
| .vidioc_querybuf = vb2_ioctl_querybuf, |
| .vidioc_qbuf = vb2_ioctl_qbuf, |
| .vidioc_dqbuf = vb2_ioctl_dqbuf, |
| .vidioc_expbuf = vb2_ioctl_expbuf, |
| |
| .vidioc_streamon = vb2_ioctl_streamon, |
| .vidioc_streamoff = vb2_ioctl_streamoff, |
| |
| .vidioc_s_tuner = hackrf_s_tuner, |
| .vidioc_g_tuner = hackrf_g_tuner, |
| |
| .vidioc_s_modulator = hackrf_s_modulator, |
| .vidioc_g_modulator = hackrf_g_modulator, |
| |
| .vidioc_s_frequency = hackrf_s_frequency, |
| .vidioc_g_frequency = hackrf_g_frequency, |
| .vidioc_enum_freq_bands = hackrf_enum_freq_bands, |
| |
| .vidioc_subscribe_event = v4l2_ctrl_subscribe_event, |
| .vidioc_unsubscribe_event = v4l2_event_unsubscribe, |
| .vidioc_log_status = v4l2_ctrl_log_status, |
| }; |
| |
| static const struct v4l2_file_operations hackrf_fops = { |
| .owner = THIS_MODULE, |
| .open = v4l2_fh_open, |
| .release = vb2_fop_release, |
| .read = vb2_fop_read, |
| .write = vb2_fop_write, |
| .poll = vb2_fop_poll, |
| .mmap = vb2_fop_mmap, |
| .unlocked_ioctl = video_ioctl2, |
| }; |
| |
| static struct video_device hackrf_template = { |
| .name = "HackRF One", |
| .release = video_device_release_empty, |
| .fops = &hackrf_fops, |
| .ioctl_ops = &hackrf_ioctl_ops, |
| }; |
| |
| static void hackrf_video_release(struct v4l2_device *v) |
| { |
| struct hackrf_dev *dev = container_of(v, struct hackrf_dev, v4l2_dev); |
| |
| dev_dbg(dev->dev, "\n"); |
| |
| v4l2_ctrl_handler_free(&dev->rx_ctrl_handler); |
| v4l2_ctrl_handler_free(&dev->tx_ctrl_handler); |
| v4l2_device_unregister(&dev->v4l2_dev); |
| kfree(dev); |
| } |
| |
| static int hackrf_s_ctrl_rx(struct v4l2_ctrl *ctrl) |
| { |
| struct hackrf_dev *dev = container_of(ctrl->handler, |
| struct hackrf_dev, rx_ctrl_handler); |
| struct usb_interface *intf = dev->intf; |
| int ret; |
| |
| switch (ctrl->id) { |
| case V4L2_CID_RF_TUNER_BANDWIDTH_AUTO: |
| case V4L2_CID_RF_TUNER_BANDWIDTH: |
| set_bit(RX_BANDWIDTH, &dev->flags); |
| break; |
| case V4L2_CID_RF_TUNER_RF_GAIN: |
| set_bit(RX_RF_GAIN, &dev->flags); |
| break; |
| case V4L2_CID_RF_TUNER_LNA_GAIN: |
| set_bit(RX_LNA_GAIN, &dev->flags); |
| break; |
| case V4L2_CID_RF_TUNER_IF_GAIN: |
| set_bit(RX_IF_GAIN, &dev->flags); |
| break; |
| default: |
| dev_dbg(&intf->dev, "unknown ctrl: id=%d name=%s\n", |
| ctrl->id, ctrl->name); |
| ret = -EINVAL; |
| goto err; |
| } |
| |
| ret = hackrf_set_params(dev); |
| if (ret) |
| goto err; |
| |
| return 0; |
| err: |
| dev_dbg(&intf->dev, "failed=%d\n", ret); |
| return ret; |
| } |
| |
| static int hackrf_s_ctrl_tx(struct v4l2_ctrl *ctrl) |
| { |
| struct hackrf_dev *dev = container_of(ctrl->handler, |
| struct hackrf_dev, tx_ctrl_handler); |
| struct usb_interface *intf = dev->intf; |
| int ret; |
| |
| switch (ctrl->id) { |
| case V4L2_CID_RF_TUNER_BANDWIDTH_AUTO: |
| case V4L2_CID_RF_TUNER_BANDWIDTH: |
| set_bit(TX_BANDWIDTH, &dev->flags); |
| break; |
| case V4L2_CID_RF_TUNER_LNA_GAIN: |
| set_bit(TX_LNA_GAIN, &dev->flags); |
| break; |
| case V4L2_CID_RF_TUNER_RF_GAIN: |
| set_bit(TX_RF_GAIN, &dev->flags); |
| break; |
| default: |
| dev_dbg(&intf->dev, "unknown ctrl: id=%d name=%s\n", |
| ctrl->id, ctrl->name); |
| ret = -EINVAL; |
| goto err; |
| } |
| |
| ret = hackrf_set_params(dev); |
| if (ret) |
| goto err; |
| |
| return 0; |
| err: |
| dev_dbg(&intf->dev, "failed=%d\n", ret); |
| return ret; |
| } |
| |
| static const struct v4l2_ctrl_ops hackrf_ctrl_ops_rx = { |
| .s_ctrl = hackrf_s_ctrl_rx, |
| }; |
| |
| static const struct v4l2_ctrl_ops hackrf_ctrl_ops_tx = { |
| .s_ctrl = hackrf_s_ctrl_tx, |
| }; |
| |
| static int hackrf_probe(struct usb_interface *intf, |
| const struct usb_device_id *id) |
| { |
| struct hackrf_dev *dev; |
| int ret; |
| u8 u8tmp, buf[BUF_SIZE]; |
| |
| dev = kzalloc(sizeof(*dev), GFP_KERNEL); |
| if (!dev) { |
| ret = -ENOMEM; |
| goto err; |
| } |
| |
| mutex_init(&dev->v4l2_lock); |
| mutex_init(&dev->vb_queue_lock); |
| spin_lock_init(&dev->buffer_list_lock); |
| INIT_LIST_HEAD(&dev->rx_buffer_list); |
| INIT_LIST_HEAD(&dev->tx_buffer_list); |
| dev->intf = intf; |
| dev->dev = &intf->dev; |
| dev->udev = interface_to_usbdev(intf); |
| dev->pixelformat = formats[0].pixelformat; |
| dev->buffersize = formats[0].buffersize; |
| dev->f_adc = bands_adc_dac[0].rangelow; |
| dev->f_dac = bands_adc_dac[0].rangelow; |
| dev->f_rx = bands_rx_tx[0].rangelow; |
| dev->f_tx = bands_rx_tx[0].rangelow; |
| set_bit(RX_ADC_FREQUENCY, &dev->flags); |
| set_bit(TX_DAC_FREQUENCY, &dev->flags); |
| set_bit(RX_RF_FREQUENCY, &dev->flags); |
| set_bit(TX_RF_FREQUENCY, &dev->flags); |
| |
| /* Detect device */ |
| ret = hackrf_ctrl_msg(dev, CMD_BOARD_ID_READ, 0, 0, &u8tmp, 1); |
| if (ret == 0) |
| ret = hackrf_ctrl_msg(dev, CMD_VERSION_STRING_READ, 0, 0, |
| buf, BUF_SIZE); |
| if (ret) { |
| dev_err(dev->dev, "Could not detect board\n"); |
| goto err_kfree; |
| } |
| |
| buf[BUF_SIZE - 1] = '\0'; |
| dev_info(dev->dev, "Board ID: %02x\n", u8tmp); |
| dev_info(dev->dev, "Firmware version: %s\n", buf); |
| |
| /* Init vb2 queue structure for receiver */ |
| dev->rx_vb2_queue.type = V4L2_BUF_TYPE_SDR_CAPTURE; |
| dev->rx_vb2_queue.io_modes = VB2_MMAP | VB2_USERPTR | VB2_DMABUF | |
| VB2_READ; |
| dev->rx_vb2_queue.ops = &hackrf_vb2_ops; |
| dev->rx_vb2_queue.mem_ops = &vb2_vmalloc_memops; |
| dev->rx_vb2_queue.drv_priv = dev; |
| dev->rx_vb2_queue.buf_struct_size = sizeof(struct hackrf_buffer); |
| dev->rx_vb2_queue.timestamp_flags = V4L2_BUF_FLAG_TIMESTAMP_MONOTONIC; |
| ret = vb2_queue_init(&dev->rx_vb2_queue); |
| if (ret) { |
| dev_err(dev->dev, "Could not initialize rx vb2 queue\n"); |
| goto err_kfree; |
| } |
| |
| /* Init vb2 queue structure for transmitter */ |
| dev->tx_vb2_queue.type = V4L2_BUF_TYPE_SDR_OUTPUT; |
| dev->tx_vb2_queue.io_modes = VB2_MMAP | VB2_USERPTR | VB2_DMABUF | |
| VB2_WRITE; |
| dev->tx_vb2_queue.ops = &hackrf_vb2_ops; |
| dev->tx_vb2_queue.mem_ops = &vb2_vmalloc_memops; |
| dev->tx_vb2_queue.drv_priv = dev; |
| dev->tx_vb2_queue.buf_struct_size = sizeof(struct hackrf_buffer); |
| dev->tx_vb2_queue.timestamp_flags = V4L2_BUF_FLAG_TIMESTAMP_MONOTONIC; |
| ret = vb2_queue_init(&dev->tx_vb2_queue); |
| if (ret) { |
| dev_err(dev->dev, "Could not initialize tx vb2 queue\n"); |
| goto err_kfree; |
| } |
| |
| /* Register controls for receiver */ |
| v4l2_ctrl_handler_init(&dev->rx_ctrl_handler, 5); |
| dev->rx_bandwidth_auto = v4l2_ctrl_new_std(&dev->rx_ctrl_handler, |
| &hackrf_ctrl_ops_rx, V4L2_CID_RF_TUNER_BANDWIDTH_AUTO, |
| 0, 1, 0, 1); |
| dev->rx_bandwidth = v4l2_ctrl_new_std(&dev->rx_ctrl_handler, |
| &hackrf_ctrl_ops_rx, V4L2_CID_RF_TUNER_BANDWIDTH, |
| 1750000, 28000000, 50000, 1750000); |
| v4l2_ctrl_auto_cluster(2, &dev->rx_bandwidth_auto, 0, false); |
| dev->rx_rf_gain = v4l2_ctrl_new_std(&dev->rx_ctrl_handler, |
| &hackrf_ctrl_ops_rx, V4L2_CID_RF_TUNER_RF_GAIN, 0, 12, 12, 0); |
| dev->rx_lna_gain = v4l2_ctrl_new_std(&dev->rx_ctrl_handler, |
| &hackrf_ctrl_ops_rx, V4L2_CID_RF_TUNER_LNA_GAIN, 0, 40, 8, 0); |
| dev->rx_if_gain = v4l2_ctrl_new_std(&dev->rx_ctrl_handler, |
| &hackrf_ctrl_ops_rx, V4L2_CID_RF_TUNER_IF_GAIN, 0, 62, 2, 0); |
| if (dev->rx_ctrl_handler.error) { |
| ret = dev->rx_ctrl_handler.error; |
| dev_err(dev->dev, "Could not initialize controls\n"); |
| goto err_v4l2_ctrl_handler_free_rx; |
| } |
| v4l2_ctrl_handler_setup(&dev->rx_ctrl_handler); |
| |
| /* Register controls for transmitter */ |
| v4l2_ctrl_handler_init(&dev->tx_ctrl_handler, 4); |
| dev->tx_bandwidth_auto = v4l2_ctrl_new_std(&dev->tx_ctrl_handler, |
| &hackrf_ctrl_ops_tx, V4L2_CID_RF_TUNER_BANDWIDTH_AUTO, |
| 0, 1, 0, 1); |
| dev->tx_bandwidth = v4l2_ctrl_new_std(&dev->tx_ctrl_handler, |
| &hackrf_ctrl_ops_tx, V4L2_CID_RF_TUNER_BANDWIDTH, |
| 1750000, 28000000, 50000, 1750000); |
| v4l2_ctrl_auto_cluster(2, &dev->tx_bandwidth_auto, 0, false); |
| dev->tx_lna_gain = v4l2_ctrl_new_std(&dev->tx_ctrl_handler, |
| &hackrf_ctrl_ops_tx, V4L2_CID_RF_TUNER_LNA_GAIN, 0, 47, 1, 0); |
| dev->tx_rf_gain = v4l2_ctrl_new_std(&dev->tx_ctrl_handler, |
| &hackrf_ctrl_ops_tx, V4L2_CID_RF_TUNER_RF_GAIN, 0, 15, 15, 0); |
| if (dev->tx_ctrl_handler.error) { |
| ret = dev->tx_ctrl_handler.error; |
| dev_err(dev->dev, "Could not initialize controls\n"); |
| goto err_v4l2_ctrl_handler_free_tx; |
| } |
| v4l2_ctrl_handler_setup(&dev->tx_ctrl_handler); |
| |
| /* Register the v4l2_device structure */ |
| dev->v4l2_dev.release = hackrf_video_release; |
| ret = v4l2_device_register(&intf->dev, &dev->v4l2_dev); |
| if (ret) { |
| dev_err(dev->dev, "Failed to register v4l2-device (%d)\n", ret); |
| goto err_v4l2_ctrl_handler_free_tx; |
| } |
| |
| /* Init video_device structure for receiver */ |
| dev->rx_vdev = hackrf_template; |
| dev->rx_vdev.queue = &dev->rx_vb2_queue; |
| dev->rx_vdev.queue->lock = &dev->vb_queue_lock; |
| dev->rx_vdev.v4l2_dev = &dev->v4l2_dev; |
| dev->rx_vdev.ctrl_handler = &dev->rx_ctrl_handler; |
| dev->rx_vdev.lock = &dev->v4l2_lock; |
| dev->rx_vdev.vfl_dir = VFL_DIR_RX; |
| video_set_drvdata(&dev->rx_vdev, dev); |
| ret = video_register_device(&dev->rx_vdev, VFL_TYPE_SDR, -1); |
| if (ret) { |
| dev_err(dev->dev, |
| "Failed to register as video device (%d)\n", ret); |
| goto err_v4l2_device_unregister; |
| } |
| dev_info(dev->dev, "Registered as %s\n", |
| video_device_node_name(&dev->rx_vdev)); |
| |
| /* Init video_device structure for transmitter */ |
| dev->tx_vdev = hackrf_template; |
| dev->tx_vdev.queue = &dev->tx_vb2_queue; |
| dev->tx_vdev.queue->lock = &dev->vb_queue_lock; |
| dev->tx_vdev.v4l2_dev = &dev->v4l2_dev; |
| dev->tx_vdev.ctrl_handler = &dev->tx_ctrl_handler; |
| dev->tx_vdev.lock = &dev->v4l2_lock; |
| dev->tx_vdev.vfl_dir = VFL_DIR_TX; |
| video_set_drvdata(&dev->tx_vdev, dev); |
| ret = video_register_device(&dev->tx_vdev, VFL_TYPE_SDR, -1); |
| if (ret) { |
| dev_err(dev->dev, |
| "Failed to register as video device (%d)\n", ret); |
| goto err_video_unregister_device_rx; |
| } |
| dev_info(dev->dev, "Registered as %s\n", |
| video_device_node_name(&dev->tx_vdev)); |
| |
| dev_notice(dev->dev, "SDR API is still slightly experimental and functionality changes may follow\n"); |
| return 0; |
| err_video_unregister_device_rx: |
| video_unregister_device(&dev->rx_vdev); |
| err_v4l2_device_unregister: |
| v4l2_device_unregister(&dev->v4l2_dev); |
| err_v4l2_ctrl_handler_free_tx: |
| v4l2_ctrl_handler_free(&dev->tx_ctrl_handler); |
| err_v4l2_ctrl_handler_free_rx: |
| v4l2_ctrl_handler_free(&dev->rx_ctrl_handler); |
| err_kfree: |
| kfree(dev); |
| err: |
| dev_dbg(dev->dev, "failed=%d\n", ret); |
| return ret; |
| } |
| |
| /* USB device ID list */ |
| static struct usb_device_id hackrf_id_table[] = { |
| { USB_DEVICE(0x1d50, 0x6089) }, /* HackRF One */ |
| { } |
| }; |
| MODULE_DEVICE_TABLE(usb, hackrf_id_table); |
| |
| /* USB subsystem interface */ |
| static struct usb_driver hackrf_driver = { |
| .name = KBUILD_MODNAME, |
| .probe = hackrf_probe, |
| .disconnect = hackrf_disconnect, |
| .id_table = hackrf_id_table, |
| }; |
| |
| module_usb_driver(hackrf_driver); |
| |
| MODULE_AUTHOR("Antti Palosaari <crope@iki.fi>"); |
| MODULE_DESCRIPTION("HackRF"); |
| MODULE_LICENSE("GPL"); |