| /* -*- c-basic-offset: 8 -*- |
| * |
| * fw-transaction.h - Header for IEEE1394 transaction logic |
| * |
| * Copyright (C) 2003-2006 Kristian Hoegsberg <krh@bitplanet.net> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software Foundation, |
| * Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. |
| */ |
| |
| #ifndef __fw_transaction_h |
| #define __fw_transaction_h |
| |
| #include <linux/device.h> |
| #include <linux/timer.h> |
| #include <linux/interrupt.h> |
| #include <linux/list.h> |
| #include <linux/fs.h> |
| #include <linux/dma-mapping.h> |
| |
| #define TCODE_WRITE_QUADLET_REQUEST 0 |
| #define TCODE_WRITE_BLOCK_REQUEST 1 |
| #define TCODE_WRITE_RESPONSE 2 |
| #define TCODE_READ_QUADLET_REQUEST 4 |
| #define TCODE_READ_BLOCK_REQUEST 5 |
| #define TCODE_READ_QUADLET_RESPONSE 6 |
| #define TCODE_READ_BLOCK_RESPONSE 7 |
| #define TCODE_CYCLE_START 8 |
| #define TCODE_LOCK_REQUEST 9 |
| #define TCODE_STREAM_DATA 10 |
| #define TCODE_LOCK_RESPONSE 11 |
| |
| #define TCODE_IS_READ_REQUEST(tcode) (((tcode) & ~1) == 4) |
| #define TCODE_IS_BLOCK_PACKET(tcode) (((tcode) & 1) != 0) |
| #define TCODE_IS_REQUEST(tcode) (((tcode) & 2) == 0) |
| #define TCODE_IS_RESPONSE(tcode) (((tcode) & 2) != 0) |
| #define TCODE_HAS_REQUEST_DATA(tcode) (((tcode) & 12) != 4) |
| #define TCODE_HAS_RESPONSE_DATA(tcode) (((tcode) & 12) != 0) |
| |
| /* Juju specific tcodes */ |
| #define TCODE_DEALLOCATE 0x10 |
| #define TCODE_LOCK_MASK_SWAP 0x11 |
| #define TCODE_LOCK_COMPARE_SWAP 0x12 |
| #define TCODE_LOCK_FETCH_ADD 0x13 |
| #define TCODE_LOCK_LITTLE_ADD 0x14 |
| #define TCODE_LOCK_BOUNDED_ADD 0x15 |
| #define TCODE_LOCK_WRAP_ADD 0x16 |
| #define TCODE_LOCK_VENDOR_SPECIFIC 0x17 |
| |
| #define SCODE_100 0x0 |
| #define SCODE_200 0x1 |
| #define SCODE_400 0x2 |
| #define SCODE_BETA 0x3 |
| |
| #define EXTCODE_MASK_SWAP 0x1 |
| #define EXTCODE_COMPARE_SWAP 0x2 |
| #define EXTCODE_FETCH_ADD 0x3 |
| #define EXTCODE_LITTLE_ADD 0x4 |
| #define EXTCODE_BOUNDED_ADD 0x5 |
| #define EXTCODE_WRAP_ADD 0x6 |
| |
| #define ACK_COMPLETE 0x1 |
| #define ACK_PENDING 0x2 |
| #define ACK_BUSY_X 0x4 |
| #define ACK_BUSY_A 0x5 |
| #define ACK_BUSY_B 0x6 |
| #define ACK_DATA_ERROR 0xd |
| #define ACK_TYPE_ERROR 0xe |
| |
| #define RCODE_COMPLETE 0x0 |
| #define RCODE_CONFLICT_ERROR 0x4 |
| #define RCODE_DATA_ERROR 0x5 |
| #define RCODE_TYPE_ERROR 0x6 |
| #define RCODE_ADDRESS_ERROR 0x7 |
| |
| /* Juju specific rcodes */ |
| #define RCODE_SEND_ERROR 0x10 |
| #define RCODE_CANCELLED 0x11 |
| #define RCODE_BUSY 0x12 |
| #define RCODE_GENERATION 0x13 |
| #define RCODE_NO_ACK 0x14 |
| |
| #define RETRY_1 0x00 |
| #define RETRY_X 0x01 |
| #define RETRY_A 0x02 |
| #define RETRY_B 0x03 |
| |
| #define LOCAL_BUS 0xffc0 |
| |
| #define SELFID_PORT_CHILD 0x3 |
| #define SELFID_PORT_PARENT 0x2 |
| #define SELFID_PORT_NCONN 0x1 |
| #define SELFID_PORT_NONE 0x0 |
| |
| #define PHY_PACKET_CONFIG 0x0 |
| #define PHY_PACKET_LINK_ON 0x1 |
| #define PHY_PACKET_SELF_ID 0x2 |
| |
| #define CSR_REGISTER_BASE 0xfffff0000000ULL |
| |
| /* register offsets relative to CSR_REGISTER_BASE */ |
| #define CSR_STATE_CLEAR 0x0 |
| #define CSR_STATE_SET 0x4 |
| #define CSR_NODE_IDS 0x8 |
| #define CSR_RESET_START 0xc |
| #define CSR_SPLIT_TIMEOUT_HI 0x18 |
| #define CSR_SPLIT_TIMEOUT_LO 0x1c |
| #define CSR_CYCLE_TIME 0x200 |
| #define CSR_BUS_TIME 0x204 |
| #define CSR_BUSY_TIMEOUT 0x210 |
| #define CSR_BUS_MANAGER_ID 0x21c |
| #define CSR_BANDWIDTH_AVAILABLE 0x220 |
| #define CSR_CHANNELS_AVAILABLE 0x224 |
| #define CSR_CHANNELS_AVAILABLE_HI 0x224 |
| #define CSR_CHANNELS_AVAILABLE_LO 0x228 |
| #define CSR_BROADCAST_CHANNEL 0x234 |
| #define CSR_CONFIG_ROM 0x400 |
| #define CSR_CONFIG_ROM_END 0x800 |
| #define CSR_FCP_COMMAND 0xB00 |
| #define CSR_FCP_RESPONSE 0xD00 |
| #define CSR_FCP_END 0xF00 |
| #define CSR_TOPOLOGY_MAP 0x1000 |
| #define CSR_TOPOLOGY_MAP_END 0x1400 |
| #define CSR_SPEED_MAP 0x2000 |
| #define CSR_SPEED_MAP_END 0x3000 |
| |
| #define fw_notify(s, args...) printk(KERN_NOTICE KBUILD_MODNAME ": " s, ## args) |
| #define fw_error(s, args...) printk(KERN_ERR KBUILD_MODNAME ": " s, ## args) |
| #define fw_debug(s, args...) printk(KERN_DEBUG KBUILD_MODNAME ": " s, ## args) |
| |
| static inline void |
| fw_memcpy_from_be32(void *_dst, void *_src, size_t size) |
| { |
| u32 *dst = _dst; |
| u32 *src = _src; |
| int i; |
| |
| for (i = 0; i < size / 4; i++) |
| dst[i] = cpu_to_be32(src[i]); |
| } |
| |
| static inline void |
| fw_memcpy_to_be32(void *_dst, void *_src, size_t size) |
| { |
| fw_memcpy_from_be32(_dst, _src, size); |
| } |
| |
| struct fw_card; |
| struct fw_packet; |
| struct fw_node; |
| struct fw_request; |
| |
| struct fw_descriptor { |
| struct list_head link; |
| size_t length; |
| u32 key; |
| const u32 *data; |
| }; |
| |
| int fw_core_add_descriptor (struct fw_descriptor *desc); |
| void fw_core_remove_descriptor (struct fw_descriptor *desc); |
| |
| typedef void (*fw_packet_callback_t) (struct fw_packet *packet, |
| struct fw_card *card, int status); |
| |
| typedef void (*fw_transaction_callback_t)(struct fw_card *card, int rcode, |
| void *data, |
| size_t length, |
| void *callback_data); |
| |
| typedef void (*fw_address_callback_t)(struct fw_card *card, |
| struct fw_request *request, |
| int tcode, int destination, int source, |
| int generation, int speed, |
| unsigned long long offset, |
| void *data, size_t length, |
| void *callback_data); |
| |
| typedef void (*fw_bus_reset_callback_t)(struct fw_card *handle, |
| int node_id, int generation, |
| u32 *self_ids, |
| int self_id_count, |
| void *callback_data); |
| |
| struct fw_packet { |
| int speed; |
| int generation; |
| u32 header[4]; |
| size_t header_length; |
| void *payload; |
| size_t payload_length; |
| u32 timestamp; |
| |
| dma_addr_t payload_bus; |
| |
| /* This callback is called when the packet transmission has |
| * completed; for successful transmission, the status code is |
| * the ack received from the destination, otherwise it's a |
| * negative errno: ENOMEM, ESTALE, ETIMEDOUT, ENODEV, EIO. |
| * The callback can be called from tasklet context and thus |
| * must never block. |
| */ |
| fw_packet_callback_t callback; |
| int ack; |
| struct list_head link; |
| }; |
| |
| struct fw_transaction { |
| int node_id; /* The generation is implied; it is always the current. */ |
| int tlabel; |
| int timestamp; |
| struct list_head link; |
| |
| struct fw_packet packet; |
| |
| /* The data passed to the callback is valid only during the |
| * callback. */ |
| fw_transaction_callback_t callback; |
| void *callback_data; |
| }; |
| |
| static inline struct fw_packet * |
| fw_packet(struct list_head *l) |
| { |
| return list_entry (l, struct fw_packet, link); |
| } |
| |
| struct fw_address_handler { |
| u64 offset; |
| size_t length; |
| fw_address_callback_t address_callback; |
| void *callback_data; |
| struct list_head link; |
| }; |
| |
| |
| struct fw_address_region { |
| u64 start; |
| u64 end; |
| }; |
| |
| extern const struct fw_address_region fw_low_memory_region; |
| extern const struct fw_address_region fw_high_memory_region; |
| extern const struct fw_address_region fw_private_region; |
| extern const struct fw_address_region fw_csr_region; |
| extern const struct fw_address_region fw_unit_space_region; |
| |
| int fw_core_add_address_handler(struct fw_address_handler *handler, |
| const struct fw_address_region *region); |
| void fw_core_remove_address_handler(struct fw_address_handler *handler); |
| void fw_fill_response(struct fw_packet *response, u32 *request_header, |
| int rcode, void *payload, size_t length); |
| void fw_send_response(struct fw_card *card, |
| struct fw_request *request, int rcode); |
| |
| extern struct bus_type fw_bus_type; |
| |
| struct fw_card { |
| const struct fw_card_driver *driver; |
| struct device *device; |
| |
| int node_id; |
| int generation; |
| /* This is the generation used for timestamping incoming requests. */ |
| int request_generation; |
| int current_tlabel, tlabel_mask; |
| struct list_head transaction_list; |
| struct timer_list flush_timer; |
| unsigned long reset_jiffies; |
| |
| unsigned long long guid; |
| int max_receive; |
| int link_speed; |
| int config_rom_generation; |
| |
| /* We need to store up to 4 self ID for a maximum of 63 devices. */ |
| int self_id_count; |
| u32 self_ids[252]; |
| |
| spinlock_t lock; /* Take this lock when handling the lists in |
| * this struct. */ |
| struct fw_node *local_node; |
| struct fw_node *root_node; |
| struct fw_node *irm_node; |
| int color; |
| int gap_count; |
| int topology_type; |
| |
| int index; |
| |
| struct device card_device; |
| |
| struct list_head link; |
| |
| /* Work struct for BM duties. */ |
| struct delayed_work work; |
| int bm_retries; |
| int bm_generation; |
| }; |
| |
| struct fw_card *fw_card_get(struct fw_card *card); |
| void fw_card_put(struct fw_card *card); |
| |
| /* The iso packet format allows for an immediate header/payload part |
| * stored in 'header' immediately after the packet info plus an |
| * indirect payload part that is pointer to by the 'payload' field. |
| * Applications can use one or the other or both to implement simple |
| * low-bandwidth streaming (e.g. audio) or more advanced |
| * scatter-gather streaming (e.g. assembling video frame automatically). */ |
| |
| struct fw_iso_packet { |
| u16 payload_length; /* Length of indirect payload. */ |
| u32 interrupt : 1; /* Generate interrupt on this packet */ |
| u32 skip : 1; /* Set to not send packet at all. */ |
| u32 tag : 2; |
| u32 sy : 4; |
| u32 header_length : 8; /* Length of immediate header. */ |
| u32 header[0]; |
| }; |
| |
| #define FW_ISO_CONTEXT_TRANSMIT 0 |
| #define FW_ISO_CONTEXT_RECEIVE 1 |
| |
| struct fw_iso_context; |
| |
| typedef void (*fw_iso_callback_t) (struct fw_iso_context *context, |
| int status, u32 cycle, void *data); |
| |
| /* An iso buffer is just a set of pages mapped for DMA in the |
| * specified direction. Since the pages are to be used for DMA, they |
| * are not mapped into the kernel virtual address space. We store the |
| * DMA address in the page private. The helper function |
| * fw_iso_buffer_map() will map the pages into a given vma. */ |
| |
| struct fw_iso_buffer { |
| enum dma_data_direction direction; |
| struct page **pages; |
| int page_count; |
| }; |
| |
| struct fw_iso_context { |
| struct fw_card *card; |
| int type; |
| int channel; |
| int speed; |
| fw_iso_callback_t callback; |
| void *callback_data; |
| }; |
| |
| int |
| fw_iso_buffer_init(struct fw_iso_buffer *buffer, |
| struct fw_card *card, |
| int page_count, |
| enum dma_data_direction direction); |
| int |
| fw_iso_buffer_map(struct fw_iso_buffer *buffer, struct vm_area_struct *vma); |
| void |
| fw_iso_buffer_destroy(struct fw_iso_buffer *buffer, struct fw_card *card); |
| |
| struct fw_iso_context * |
| fw_iso_context_create(struct fw_card *card, int type, |
| fw_iso_callback_t callback, |
| void *callback_data); |
| |
| |
| void |
| fw_iso_context_destroy(struct fw_iso_context *ctx); |
| |
| void |
| fw_iso_context_start(struct fw_iso_context *ctx, |
| int channel, int speed, int cycle); |
| |
| int |
| fw_iso_context_queue(struct fw_iso_context *ctx, |
| struct fw_iso_packet *packet, |
| struct fw_iso_buffer *buffer, |
| unsigned long payload); |
| |
| int |
| fw_iso_context_send(struct fw_iso_context *ctx, |
| int channel, int speed, int cycle); |
| |
| struct fw_card_driver { |
| const char *name; |
| |
| /* Enable the given card with the given initial config rom. |
| * This function is expected to activate the card, and either |
| * enable the PHY or set the link_on bit and initiate a bus |
| * reset. */ |
| int (*enable) (struct fw_card *card, u32 *config_rom, size_t length); |
| |
| int (*update_phy_reg) (struct fw_card *card, int address, |
| int clear_bits, int set_bits); |
| |
| /* Update the config rom for an enabled card. This function |
| * should change the config rom that is presented on the bus |
| * an initiate a bus reset. */ |
| int (*set_config_rom) (struct fw_card *card, |
| u32 *config_rom, size_t length); |
| |
| void (*send_request) (struct fw_card *card, struct fw_packet *packet); |
| void (*send_response) (struct fw_card *card, struct fw_packet *packet); |
| /* Calling cancel is valid once a packet has been submitted. */ |
| int (*cancel_packet) (struct fw_card *card, struct fw_packet *packet); |
| |
| /* Allow the specified node ID to do direct DMA out and in of |
| * host memory. The card will disable this for all node when |
| * a bus reset happens, so driver need to reenable this after |
| * bus reset. Returns 0 on success, -ENODEV if the card |
| * doesn't support this, -ESTALE if the generation doesn't |
| * match. */ |
| int (*enable_phys_dma) (struct fw_card *card, |
| int node_id, int generation); |
| |
| struct fw_iso_context * |
| (*allocate_iso_context)(struct fw_card *card, int type); |
| void (*free_iso_context)(struct fw_iso_context *ctx); |
| |
| int (*send_iso)(struct fw_iso_context *ctx, s32 cycle); |
| |
| int (*queue_iso)(struct fw_iso_context *ctx, |
| struct fw_iso_packet *packet, |
| struct fw_iso_buffer *buffer, |
| unsigned long payload); |
| }; |
| |
| int |
| fw_core_initiate_bus_reset(struct fw_card *card, int short_reset); |
| |
| void |
| fw_send_request(struct fw_card *card, struct fw_transaction *t, |
| int tcode, int node_id, int generation, int speed, |
| unsigned long long offset, |
| void *data, size_t length, |
| fw_transaction_callback_t callback, void *callback_data); |
| |
| int fw_cancel_transaction(struct fw_card *card, |
| struct fw_transaction *transaction); |
| |
| void fw_flush_transactions(struct fw_card *card); |
| |
| void fw_send_phy_config(struct fw_card *card, |
| int node_id, int generation, int gap_count); |
| |
| /* Called by the topology code to inform the device code of node |
| * activity; found, lost, or updated nodes */ |
| void |
| fw_node_event(struct fw_card *card, struct fw_node *node, int event); |
| |
| /* API used by card level drivers */ |
| |
| /* Do we need phy speed here also? If we add more args, maybe we |
| should go back to struct fw_card_info. */ |
| void |
| fw_card_initialize(struct fw_card *card, const struct fw_card_driver *driver, |
| struct device *device); |
| int |
| fw_card_add(struct fw_card *card, |
| u32 max_receive, u32 link_speed, u64 guid); |
| |
| void |
| fw_core_remove_card(struct fw_card *card); |
| |
| void |
| fw_core_handle_bus_reset(struct fw_card *card, |
| int node_id, int generation, |
| int self_id_count, u32 *self_ids); |
| void |
| fw_core_handle_request(struct fw_card *card, struct fw_packet *request); |
| |
| void |
| fw_core_handle_response(struct fw_card *card, struct fw_packet *packet); |
| |
| #endif /* __fw_transaction_h */ |