drivers/net/wireless/zd1211rw/zd_usb.c

/* ZD1211 USB-WLAN driver for Linux
 *
 * Copyright (C) 2005-2007 Ulrich Kunitz <kune@deine-taler.de>
 * Copyright (C) 2006-2007 Daniel Drake <dsd@gentoo.org>
 * Copyright (C) 2006-2007 Michael Wu <flamingice@sourmilk.net>
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation; either version 2 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
 */

#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/firmware.h>
#include <linux/device.h>
#include <linux/errno.h>
#include <linux/slab.h>
#include <linux/skbuff.h>
#include <linux/usb.h>
#include <linux/workqueue.h>
#include <linux/module.h>
#include <net/mac80211.h>
#include <asm/unaligned.h>

#include "zd_def.h"
#include "zd_mac.h"
#include "zd_usb.h"

static struct usb_device_id usb_ids[] = {
	/* ZD1211 */
	{ USB_DEVICE(0x0105, 0x145f), .driver_info = DEVICE_ZD1211 },
	{ USB_DEVICE(0x0586, 0x3401), .driver_info = DEVICE_ZD1211 },
	{ USB_DEVICE(0x0586, 0x3402), .driver_info = DEVICE_ZD1211 },
	{ USB_DEVICE(0x0586, 0x3407), .driver_info = DEVICE_ZD1211 },
	{ USB_DEVICE(0x0586, 0x3409), .driver_info = DEVICE_ZD1211 },
	{ USB_DEVICE(0x079b, 0x004a), .driver_info = DEVICE_ZD1211 },
	{ USB_DEVICE(0x07b8, 0x6001), .driver_info = DEVICE_ZD1211 },
	{ USB_DEVICE(0x0ace, 0x1211), .driver_info = DEVICE_ZD1211 },
	{ USB_DEVICE(0x0ace, 0xa211), .driver_info = DEVICE_ZD1211 },
	{ USB_DEVICE(0x0b05, 0x170c), .driver_info = DEVICE_ZD1211 },
	{ USB_DEVICE(0x0b3b, 0x1630), .driver_info = DEVICE_ZD1211 },
	{ USB_DEVICE(0x0b3b, 0x5630), .driver_info = DEVICE_ZD1211 },
	{ USB_DEVICE(0x0df6, 0x9071), .driver_info = DEVICE_ZD1211 },
	{ USB_DEVICE(0x0df6, 0x9075), .driver_info = DEVICE_ZD1211 },
	{ USB_DEVICE(0x126f, 0xa006), .driver_info = DEVICE_ZD1211 },
	{ USB_DEVICE(0x129b, 0x1666), .driver_info = DEVICE_ZD1211 },
	{ USB_DEVICE(0x13b1, 0x001e), .driver_info = DEVICE_ZD1211 },
	{ USB_DEVICE(0x1435, 0x0711), .driver_info = DEVICE_ZD1211 },
	{ USB_DEVICE(0x14ea, 0xab10), .driver_info = DEVICE_ZD1211 },
	{ USB_DEVICE(0x14ea, 0xab13), .driver_info = DEVICE_ZD1211 },
	{ USB_DEVICE(0x157e, 0x300a), .driver_info = DEVICE_ZD1211 },
	{ USB_DEVICE(0x157e, 0x300b), .driver_info = DEVICE_ZD1211 },
	{ USB_DEVICE(0x157e, 0x3204), .driver_info = DEVICE_ZD1211 },
	{ USB_DEVICE(0x157e, 0x3207), .driver_info = DEVICE_ZD1211 },
	{ USB_DEVICE(0x1740, 0x2000), .driver_info = DEVICE_ZD1211 },
	{ USB_DEVICE(0x6891, 0xa727), .driver_info = DEVICE_ZD1211 },
	/* ZD1211B */
	{ USB_DEVICE(0x0053, 0x5301), .driver_info = DEVICE_ZD1211B },
	{ USB_DEVICE(0x0409, 0x0248), .driver_info = DEVICE_ZD1211B },
	{ USB_DEVICE(0x0411, 0x00da), .driver_info = DEVICE_ZD1211B },
	{ USB_DEVICE(0x0471, 0x1236), .driver_info = DEVICE_ZD1211B },
	{ USB_DEVICE(0x0471, 0x1237), .driver_info = DEVICE_ZD1211B },
	{ USB_DEVICE(0x050d, 0x705c), .driver_info = DEVICE_ZD1211B },
	{ USB_DEVICE(0x054c, 0x0257), .driver_info = DEVICE_ZD1211B },
	{ USB_DEVICE(0x0586, 0x340a), .driver_info = DEVICE_ZD1211B },
	{ USB_DEVICE(0x0586, 0x340f), .driver_info = DEVICE_ZD1211B },
	{ USB_DEVICE(0x0586, 0x3410), .driver_info = DEVICE_ZD1211B },
	{ USB_DEVICE(0x0586, 0x3412), .driver_info = DEVICE_ZD1211B },
	{ USB_DEVICE(0x0586, 0x3413), .driver_info = DEVICE_ZD1211B },
	{ USB_DEVICE(0x079b, 0x0062), .driver_info = DEVICE_ZD1211B },
	{ USB_DEVICE(0x07b8, 0x6001), .driver_info = DEVICE_ZD1211B },
	{ USB_DEVICE(0x07fa, 0x1196), .driver_info = DEVICE_ZD1211B },
	{ USB_DEVICE(0x083a, 0x4505), .driver_info = DEVICE_ZD1211B },
	{ USB_DEVICE(0x083a, 0xe501), .driver_info = DEVICE_ZD1211B },
	{ USB_DEVICE(0x083a, 0xe503), .driver_info = DEVICE_ZD1211B },
	{ USB_DEVICE(0x083a, 0xe506), .driver_info = DEVICE_ZD1211B },
	{ USB_DEVICE(0x0ace, 0x1215), .driver_info = DEVICE_ZD1211B },
	{ USB_DEVICE(0x0ace, 0xb215), .driver_info = DEVICE_ZD1211B },
	{ USB_DEVICE(0x0b05, 0x171b), .driver_info = DEVICE_ZD1211B },
	{ USB_DEVICE(0x0baf, 0x0121), .driver_info = DEVICE_ZD1211B },
	{ USB_DEVICE(0x0cde, 0x001a), .driver_info = DEVICE_ZD1211B },
	{ USB_DEVICE(0x0df6, 0x0036), .driver_info = DEVICE_ZD1211B },
	{ USB_DEVICE(0x129b, 0x1667), .driver_info = DEVICE_ZD1211B },
	{ USB_DEVICE(0x13b1, 0x0024), .driver_info = DEVICE_ZD1211B },
	{ USB_DEVICE(0x157e, 0x300d), .driver_info = DEVICE_ZD1211B },
	{ USB_DEVICE(0x1582, 0x6003), .driver_info = DEVICE_ZD1211B },
	{ USB_DEVICE(0x2019, 0x5303), .driver_info = DEVICE_ZD1211B },
	{ USB_DEVICE(0x2019, 0xed01), .driver_info = DEVICE_ZD1211B },
	/* "Driverless" devices that need ejecting */
	{ USB_DEVICE(0x0ace, 0x2011), .driver_info = DEVICE_INSTALLER },
	{ USB_DEVICE(0x0ace, 0x20ff), .driver_info = DEVICE_INSTALLER },
	{}
};

MODULE_LICENSE("GPL");
MODULE_DESCRIPTION("USB driver for devices with the ZD1211 chip.");
MODULE_AUTHOR("Ulrich Kunitz");
MODULE_AUTHOR("Daniel Drake");
MODULE_VERSION("1.0");
MODULE_DEVICE_TABLE(usb, usb_ids);

#define FW_ZD1211_PREFIX	"zd1211/zd1211_"
#define FW_ZD1211B_PREFIX	"zd1211/zd1211b_"

static bool check_read_regs(struct zd_usb *usb, struct usb_req_read_regs *req,
			    unsigned int count);

/* USB device initialization */
static void int_urb_complete(struct urb *urb);

static int request_fw_file(
	const struct firmware **fw, const char *name, struct device *device)
{
	int r;

	dev_dbg_f(device, "fw name %s\n", name);

	r = request_firmware(fw, name, device);
	if (r)
		dev_err(device,
		       "Could not load firmware file %s. Error number %d\n",
		       name, r);
	return r;
}

static inline u16 get_bcdDevice(const struct usb_device *udev)
{
	return le16_to_cpu(udev->descriptor.bcdDevice);
}

enum upload_code_flags {
	REBOOT = 1,
};

/* Ensures that MAX_TRANSFER_SIZE is even. */
#define MAX_TRANSFER_SIZE (USB_MAX_TRANSFER_SIZE & ~1)

static int upload_code(struct usb_device *udev,
	const u8 *data, size_t size, u16 code_offset, int flags)
{
	u8 *p;
	int r;

	/* USB request blocks need "kmalloced" buffers.
	 */
	p = kmalloc(MAX_TRANSFER_SIZE, GFP_KERNEL);
	if (!p) {
		dev_err(&udev->dev, "out of memory\n");
		r = -ENOMEM;
		goto error;
	}

	size &= ~1;
	while (size > 0) {
		size_t transfer_size = size <= MAX_TRANSFER_SIZE ?
			size : MAX_TRANSFER_SIZE;

		dev_dbg_f(&udev->dev, "transfer size %zu\n", transfer_size);

		memcpy(p, data, transfer_size);
		r = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
			USB_REQ_FIRMWARE_DOWNLOAD,
			USB_DIR_OUT | USB_TYPE_VENDOR,
			code_offset, 0, p, transfer_size, 1000 /* ms */);
		if (r < 0) {
			dev_err(&udev->dev,
			       "USB control request for firmware upload"
			       " failed. Error number %d\n", r);
			goto error;
		}
		transfer_size = r & ~1;

		size -= transfer_size;
		data += transfer_size;
		code_offset += transfer_size/sizeof(u16);
	}

	if (flags & REBOOT) {
		u8 ret;

		/* Use "DMA-aware" buffer. */
		r = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0),
			USB_REQ_FIRMWARE_CONFIRM,
			USB_DIR_IN | USB_TYPE_VENDOR,
			0, 0, p, sizeof(ret), 5000 /* ms */);
		if (r != sizeof(ret)) {
			dev_err(&udev->dev,
				"control request firmeware confirmation failed."
				" Return value %d\n", r);
			if (r >= 0)
				r = -ENODEV;
			goto error;
		}
		ret = p[0];
		if (ret & 0x80) {
			dev_err(&udev->dev,
				"Internal error while downloading."
				" Firmware confirm return value %#04x\n",
				(unsigned int)ret);
			r = -ENODEV;
			goto error;
		}
		dev_dbg_f(&udev->dev, "firmware confirm return value %#04x\n",
			(unsigned int)ret);
	}

	r = 0;
error:
	kfree(p);
	return r;
}

static u16 get_word(const void *data, u16 offset)
{
	const __le16 *p = data;
	return le16_to_cpu(p[offset]);
}

static char *get_fw_name(struct zd_usb *usb, char *buffer, size_t size,
	               const char* postfix)
{
	scnprintf(buffer, size, "%s%s",
		usb->is_zd1211b ?
			FW_ZD1211B_PREFIX : FW_ZD1211_PREFIX,
		postfix);
	return buffer;
}

static int handle_version_mismatch(struct zd_usb *usb,
	const struct firmware *ub_fw)
{
	struct usb_device *udev = zd_usb_to_usbdev(usb);
	const struct firmware *ur_fw = NULL;
	int offset;
	int r = 0;
	char fw_name[128];

	r = request_fw_file(&ur_fw,
		get_fw_name(usb, fw_name, sizeof(fw_name), "ur"),
		&udev->dev);
	if (r)
		goto error;

	r = upload_code(udev, ur_fw->data, ur_fw->size, FW_START, REBOOT);
	if (r)
		goto error;

	offset = (E2P_BOOT_CODE_OFFSET * sizeof(u16));
	r = upload_code(udev, ub_fw->data + offset, ub_fw->size - offset,
		E2P_START + E2P_BOOT_CODE_OFFSET, REBOOT);

	/* At this point, the vendor driver downloads the whole firmware
	 * image, hacks around with version IDs, and uploads it again,
	 * completely overwriting the boot code. We do not do this here as
	 * it is not required on any tested devices, and it is suspected to
	 * cause problems. */
error:
	release_firmware(ur_fw);
	return r;
}

static int upload_firmware(struct zd_usb *usb)
{
	int r;
	u16 fw_bcdDevice;
	u16 bcdDevice;
	struct usb_device *udev = zd_usb_to_usbdev(usb);
	const struct firmware *ub_fw = NULL;
	const struct firmware *uph_fw = NULL;
	char fw_name[128];

	bcdDevice = get_bcdDevice(udev);

	r = request_fw_file(&ub_fw,
		get_fw_name(usb, fw_name, sizeof(fw_name), "ub"),
		&udev->dev);
	if (r)
		goto error;

	fw_bcdDevice = get_word(ub_fw->data, E2P_DATA_OFFSET);

	if (fw_bcdDevice != bcdDevice) {
		dev_info(&udev->dev,
			"firmware version %#06x and device bootcode version "
			"%#06x differ\n", fw_bcdDevice, bcdDevice);
		if (bcdDevice <= 0x4313)
			dev_warn(&udev->dev, "device has old bootcode, please "
				"report success or failure\n");

		r = handle_version_mismatch(usb, ub_fw);
		if (r)
			goto error;
	} else {
		dev_dbg_f(&udev->dev,
			"firmware device id %#06x is equal to the "
			"actual device id\n", fw_bcdDevice);
	}


	r = request_fw_file(&uph_fw,
		get_fw_name(usb, fw_name, sizeof(fw_name), "uphr"),
		&udev->dev);
	if (r)
		goto error;

	r = upload_code(udev, uph_fw->data, uph_fw->size, FW_START, REBOOT);
	if (r) {
		dev_err(&udev->dev,
			"Could not upload firmware code uph. Error number %d\n",
			r);
	}

	/* FALL-THROUGH */
error:
	release_firmware(ub_fw);
	release_firmware(uph_fw);
	return r;
}

MODULE_FIRMWARE(FW_ZD1211B_PREFIX "ur");
MODULE_FIRMWARE(FW_ZD1211_PREFIX "ur");
MODULE_FIRMWARE(FW_ZD1211B_PREFIX "ub");
MODULE_FIRMWARE(FW_ZD1211_PREFIX "ub");
MODULE_FIRMWARE(FW_ZD1211B_PREFIX "uphr");
MODULE_FIRMWARE(FW_ZD1211_PREFIX "uphr");

/* Read data from device address space using "firmware interface" which does
 * not require firmware to be loaded. */
int zd_usb_read_fw(struct zd_usb *usb, zd_addr_t addr, u8 *data, u16 len)
{
	int r;
	struct usb_device *udev = zd_usb_to_usbdev(usb);
	u8 *buf;

	/* Use "DMA-aware" buffer. */
	buf = kmalloc(len, GFP_KERNEL);
	if (!buf)
		return -ENOMEM;
	r = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0),
		USB_REQ_FIRMWARE_READ_DATA, USB_DIR_IN | 0x40, addr, 0,
		buf, len, 5000);
	if (r < 0) {
		dev_err(&udev->dev,
			"read over firmware interface failed: %d\n", r);
		goto exit;
	} else if (r != len) {
		dev_err(&udev->dev,
			"incomplete read over firmware interface: %d/%d\n",
			r, len);
		r = -EIO;
		goto exit;
	}
	r = 0;
	memcpy(data, buf, len);
exit:
	kfree(buf);
	return r;
}

#define urb_dev(urb) (&(urb)->dev->dev)

static inline void handle_regs_int_override(struct urb *urb)
{
	struct zd_usb *usb = urb->context;
	struct zd_usb_interrupt *intr = &usb->intr;

	spin_lock(&intr->lock);
	if (atomic_read(&intr->read_regs_enabled)) {
		atomic_set(&intr->read_regs_enabled, 0);
		intr->read_regs_int_overridden = 1;
		complete(&intr->read_regs.completion);
	}
	spin_unlock(&intr->lock);
}

static inline void handle_regs_int(struct urb *urb)
{
	struct zd_usb *usb = urb->context;
	struct zd_usb_interrupt *intr = &usb->intr;
	int len;
	u16 int_num;

	ZD_ASSERT(in_interrupt());
	spin_lock(&intr->lock);

	int_num = le16_to_cpu(*(__le16 *)(urb->transfer_buffer+2));
	if (int_num == CR_INTERRUPT) {
		struct zd_mac *mac = zd_hw_mac(zd_usb_to_hw(urb->context));
		spin_lock(&mac->lock);
		memcpy(&mac->intr_buffer, urb->transfer_buffer,
				USB_MAX_EP_INT_BUFFER);
		spin_unlock(&mac->lock);
		schedule_work(&mac->process_intr);
	} else if (atomic_read(&intr->read_regs_enabled)) {
		len = urb->actual_length;
		intr->read_regs.length = urb->actual_length;
		if (len > sizeof(intr->read_regs.buffer))
			len = sizeof(intr->read_regs.buffer);

		memcpy(intr->read_regs.buffer, urb->transfer_buffer, len);

		/* Sometimes USB_INT_ID_REGS is not overridden, but comes after
		 * USB_INT_ID_RETRY_FAILED. Read-reg retry then gets this
		 * delayed USB_INT_ID_REGS, but leaves USB_INT_ID_REGS of
		 * retry unhandled. Next read-reg command then might catch
		 * this wrong USB_INT_ID_REGS. Fix by ignoring wrong reads.
		 */
		if (!check_read_regs(usb, intr->read_regs.req,
						intr->read_regs.req_count))
			goto out;

		atomic_set(&intr->read_regs_enabled, 0);
		intr->read_regs_int_overridden = 0;
		complete(&intr->read_regs.completion);

		goto out;
	}

out:
	spin_unlock(&intr->lock);

	/* CR_INTERRUPT might override read_reg too. */
	if (int_num == CR_INTERRUPT && atomic_read(&intr->read_regs_enabled))
		handle_regs_int_override(urb);
}

static void int_urb_complete(struct urb *urb)
{
	int r;
	struct usb_int_header *hdr;
	struct zd_usb *usb;
	struct zd_usb_interrupt *intr;

	switch (urb->status) {
	case 0:
		break;
	case -ESHUTDOWN:
	case -EINVAL:
	case -ENODEV:
	case -ENOENT:
	case -ECONNRESET:
	case -EPIPE:
		dev_dbg_f(urb_dev(urb), "urb %p error %d\n", urb, urb->status);
		return;
	default:
		dev_dbg_f(urb_dev(urb), "urb %p error %d\n", urb, urb->status);
		goto resubmit;
	}

	if (urb->actual_length < sizeof(hdr)) {
		dev_dbg_f(urb_dev(urb), "error: urb %p to small\n", urb);
		goto resubmit;
	}

	hdr = urb->transfer_buffer;
	if (hdr->type != USB_INT_TYPE) {
		dev_dbg_f(urb_dev(urb), "error: urb %p wrong type\n", urb);
		goto resubmit;
	}

	/* USB_INT_ID_RETRY_FAILED triggered by tx-urb submit can override
	 * pending USB_INT_ID_REGS causing read command timeout.
	 */
	usb = urb->context;
	intr = &usb->intr;
	if (hdr->id != USB_INT_ID_REGS && atomic_read(&intr->read_regs_enabled))
		handle_regs_int_override(urb);

	switch (hdr->id) {
	case USB_INT_ID_REGS:
		handle_regs_int(urb);
		break;
	case USB_INT_ID_RETRY_FAILED:
		zd_mac_tx_failed(urb);
		break;
	default:
		dev_dbg_f(urb_dev(urb), "error: urb %p unknown id %x\n", urb,
			(unsigned int)hdr->id);
		goto resubmit;
	}

resubmit:
	r = usb_submit_urb(urb, GFP_ATOMIC);
	if (r) {
		dev_dbg_f(urb_dev(urb), "error: resubmit urb %p err code %d\n",
			  urb, r);
		/* TODO: add worker to reset intr->urb */
	}
	return;
}

static inline int int_urb_interval(struct usb_device *udev)
{
	switch (udev->speed) {
	case USB_SPEED_HIGH:
		return 4;
	case USB_SPEED_LOW:
		return 10;
	case USB_SPEED_FULL:
	default:
		return 1;
	}
}

static inline int usb_int_enabled(struct zd_usb *usb)
{
	unsigned long flags;
	struct zd_usb_interrupt *intr = &usb->intr;
	struct urb *urb;

	spin_lock_irqsave(&intr->lock, flags);
	urb = intr->urb;
	spin_unlock_irqrestore(&intr->lock, flags);
	return urb != NULL;
}

int zd_usb_enable_int(struct zd_usb *usb)
{
	int r;
	struct usb_device *udev = zd_usb_to_usbdev(usb);
	struct zd_usb_interrupt *intr = &usb->intr;
	struct urb *urb;

	dev_dbg_f(zd_usb_dev(usb), "\n");

	urb = usb_alloc_urb(0, GFP_KERNEL);
	if (!urb) {
		r = -ENOMEM;
		goto out;
	}

	ZD_ASSERT(!irqs_disabled());
	spin_lock_irq(&intr->lock);
	if (intr->urb) {
		spin_unlock_irq(&intr->lock);
		r = 0;
		goto error_free_urb;
	}
	intr->urb = urb;
	spin_unlock_irq(&intr->lock);

	r = -ENOMEM;
	intr->buffer = usb_alloc_coherent(udev, USB_MAX_EP_INT_BUFFER,
					  GFP_KERNEL, &intr->buffer_dma);
	if (!intr->buffer) {
		dev_dbg_f(zd_usb_dev(usb),
			"couldn't allocate transfer_buffer\n");
		goto error_set_urb_null;
	}

	usb_fill_int_urb(urb, udev, usb_rcvintpipe(udev, EP_INT_IN),
			 intr->buffer, USB_MAX_EP_INT_BUFFER,
			 int_urb_complete, usb,
			 intr->interval);
	urb->transfer_dma = intr->buffer_dma;
	urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;

	dev_dbg_f(zd_usb_dev(usb), "submit urb %p\n", intr->urb);
	r = usb_submit_urb(urb, GFP_KERNEL);
	if (r) {
		dev_dbg_f(zd_usb_dev(usb),
			 "Couldn't submit urb. Error number %d\n", r);
		goto error;
	}

	return 0;
error:
	usb_free_coherent(udev, USB_MAX_EP_INT_BUFFER,
			  intr->buffer, intr->buffer_dma);
error_set_urb_null:
	spin_lock_irq(&intr->lock);
	intr->urb = NULL;
	spin_unlock_irq(&intr->lock);
error_free_urb:
	usb_free_urb(urb);
out:
	return r;
}

void zd_usb_disable_int(struct zd_usb *usb)
{
	unsigned long flags;
	struct usb_device *udev = zd_usb_to_usbdev(usb);
	struct zd_usb_interrupt *intr = &usb->intr;
	struct urb *urb;
	void *buffer;
	dma_addr_t buffer_dma;

	spin_lock_irqsave(&intr->lock, flags);
	urb = intr->urb;
	if (!urb) {
		spin_unlock_irqrestore(&intr->lock, flags);
		return;
	}
	intr->urb = NULL;
	buffer = intr->buffer;
	buffer_dma = intr->buffer_dma;
	intr->buffer = NULL;
	spin_unlock_irqrestore(&intr->lock, flags);

	usb_kill_urb(urb);
	dev_dbg_f(zd_usb_dev(usb), "urb %p killed\n", urb);
	usb_free_urb(urb);

	if (buffer)
		usb_free_coherent(udev, USB_MAX_EP_INT_BUFFER,
				  buffer, buffer_dma);
}

static void handle_rx_packet(struct zd_usb *usb, const u8 *buffer,
			     unsigned int length)
{
	int i;
	const struct rx_length_info *length_info;

	if (length < sizeof(struct rx_length_info)) {
		/* It's not a complete packet anyhow. */
		dev_dbg_f(zd_usb_dev(usb), "invalid, small RX packet : %d\n",
					   length);
		return;
	}
	length_info = (struct rx_length_info *)
		(buffer + length - sizeof(struct rx_length_info));

	/* It might be that three frames are merged into a single URB
	 * transaction. We have to check for the length info tag.
	 *
	 * While testing we discovered that length_info might be unaligned,
	 * because if USB transactions are merged, the last packet will not
	 * be padded. Unaligned access might also happen if the length_info
	 * structure is not present.
	 */
	if (get_unaligned_le16(&length_info->tag) == RX_LENGTH_INFO_TAG)
	{
		unsigned int l, k, n;
		for (i = 0, l = 0;; i++) {
			k = get_unaligned_le16(&length_info->length[i]);
			if (k == 0)
				return;
			n = l+k;
			if (n > length)
				return;
			zd_mac_rx(zd_usb_to_hw(usb), buffer+l, k);
			if (i >= 2)
				return;
			l = (n+3) & ~3;
		}
	} else {
		zd_mac_rx(zd_usb_to_hw(usb), buffer, length);
	}
}

static void rx_urb_complete(struct urb *urb)
{
	int r;
	struct zd_usb *usb;
	struct zd_usb_rx *rx;
	const u8 *buffer;
	unsigned int length;

	switch (urb->status) {
	case 0:
		break;
	case -ESHUTDOWN:
	case -EINVAL:
	case -ENODEV:
	case -ENOENT:
	case -ECONNRESET:
	case -EPIPE:
		dev_dbg_f(urb_dev(urb), "urb %p error %d\n", urb, urb->status);
		return;
	default:
		dev_dbg_f(urb_dev(urb), "urb %p error %d\n", urb, urb->status);
		goto resubmit;
	}

	buffer = urb->transfer_buffer;
	length = urb->actual_length;
	usb = urb->context;
	rx = &usb->rx;

	tasklet_schedule(&rx->reset_timer_tasklet);

	if (length%rx->usb_packet_size > rx->usb_packet_size-4) {
		/* If there is an old first fragment, we don't care. */
		dev_dbg_f(urb_dev(urb), "*** first fragment ***\n");
		ZD_ASSERT(length <= ARRAY_SIZE(rx->fragment));
		spin_lock(&rx->lock);
		memcpy(rx->fragment, buffer, length);
		rx->fragment_length = length;
		spin_unlock(&rx->lock);
		goto resubmit;
	}

	spin_lock(&rx->lock);
	if (rx->fragment_length > 0) {
		/* We are on a second fragment, we believe */
		ZD_ASSERT(length + rx->fragment_length <=
			  ARRAY_SIZE(rx->fragment));
		dev_dbg_f(urb_dev(urb), "*** second fragment ***\n");
		memcpy(rx->fragment+rx->fragment_length, buffer, length);
		handle_rx_packet(usb, rx->fragment,
			         rx->fragment_length + length);
		rx->fragment_length = 0;
		spin_unlock(&rx->lock);
	} else {
		spin_unlock(&rx->lock);
		handle_rx_packet(usb, buffer, length);
	}

resubmit:
	r = usb_submit_urb(urb, GFP_ATOMIC);
	if (r)
		dev_dbg_f(urb_dev(urb), "urb %p resubmit error %d\n", urb, r);
}

static struct urb *alloc_rx_urb(struct zd_usb *usb)
{
	struct usb_device *udev = zd_usb_to_usbdev(usb);
	struct urb *urb;
	void *buffer;

	urb = usb_alloc_urb(0, GFP_KERNEL);
	if (!urb)
		return NULL;
	buffer = usb_alloc_coherent(udev, USB_MAX_RX_SIZE, GFP_KERNEL,
				    &urb->transfer_dma);
	if (!buffer) {
		usb_free_urb(urb);
		return NULL;
	}

	usb_fill_bulk_urb(urb, udev, usb_rcvbulkpipe(udev, EP_DATA_IN),
			  buffer, USB_MAX_RX_SIZE,
			  rx_urb_complete, usb);
	urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;

	return urb;
}

static void free_rx_urb(struct urb *urb)
{
	if (!urb)
		return;
	usb_free_coherent(urb->dev, urb->transfer_buffer_length,
			  urb->transfer_buffer, urb->transfer_dma);
	usb_free_urb(urb);
}

static int __zd_usb_enable_rx(struct zd_usb *usb)
{
	int i, r;
	struct zd_usb_rx *rx = &usb->rx;
	struct urb **urbs;

	dev_dbg_f(zd_usb_dev(usb), "\n");

	r = -ENOMEM;
	urbs = kcalloc(RX_URBS_COUNT, sizeof(struct urb *), GFP_KERNEL);
	if (!urbs)
		goto error;
	for (i = 0; i < RX_URBS_COUNT; i++) {
		urbs[i] = alloc_rx_urb(usb);
		if (!urbs[i])
			goto error;
	}

	ZD_ASSERT(!irqs_disabled());
	spin_lock_irq(&rx->lock);
	if (rx->urbs) {
		spin_unlock_irq(&rx->lock);
		r = 0;
		goto error;
	}
	rx->urbs = urbs;
	rx->urbs_count = RX_URBS_COUNT;
	spin_unlock_irq(&rx->lock);

	for (i = 0; i < RX_URBS_COUNT; i++) {
		r = usb_submit_urb(urbs[i], GFP_KERNEL);
		if (r)
			goto error_submit;
	}

	return 0;
error_submit:
	for (i = 0; i < RX_URBS_COUNT; i++) {
		usb_kill_urb(urbs[i]);
	}
	spin_lock_irq(&rx->lock);
	rx->urbs = NULL;
	rx->urbs_count = 0;
	spin_unlock_irq(&rx->lock);
error:
	if (urbs) {
		for (i = 0; i < RX_URBS_COUNT; i++)
			free_rx_urb(urbs[i]);
	}
	return r;
}

int zd_usb_enable_rx(struct zd_usb *usb)
{
	int r;
	struct zd_usb_rx *rx = &usb->rx;

	mutex_lock(&rx->setup_mutex);
	r = __zd_usb_enable_rx(usb);
	mutex_unlock(&rx->setup_mutex);

	zd_usb_reset_rx_idle_timer(usb);

	return r;
}

static void __zd_usb_disable_rx(struct zd_usb *usb)
{
	int i;
	unsigned long flags;
	struct urb **urbs;
	unsigned int count;
	struct zd_usb_rx *rx = &usb->rx;

	spin_lock_irqsave(&rx->lock, flags);
	urbs = rx->urbs;
	count = rx->urbs_count;
	spin_unlock_irqrestore(&rx->lock, flags);
	if (!urbs)
		return;

	for (i = 0; i < count; i++) {
		usb_kill_urb(urbs[i]);
		free_rx_urb(urbs[i]);
	}
	kfree(urbs);

	spin_lock_irqsave(&rx->lock, flags);
	rx->urbs = NULL;
	rx->urbs_count = 0;
	spin_unlock_irqrestore(&rx->lock, flags);
}

void zd_usb_disable_rx(struct zd_usb *usb)
{
	struct zd_usb_rx *rx = &usb->rx;

	mutex_lock(&rx->setup_mutex);
	__zd_usb_disable_rx(usb);
	mutex_unlock(&rx->setup_mutex);

	tasklet_kill(&rx->reset_timer_tasklet);
	cancel_delayed_work_sync(&rx->idle_work);
}

static void zd_usb_reset_rx(struct zd_usb *usb)
{
	bool do_reset;
	struct zd_usb_rx *rx = &usb->rx;
	unsigned long flags;

	mutex_lock(&rx->setup_mutex);

	spin_lock_irqsave(&rx->lock, flags);
	do_reset = rx->urbs != NULL;
	spin_unlock_irqrestore(&rx->lock, flags);

	if (do_reset) {
		__zd_usb_disable_rx(usb);
		__zd_usb_enable_rx(usb);
	}

	mutex_unlock(&rx->setup_mutex);

	if (do_reset)
		zd_usb_reset_rx_idle_timer(usb);
}

/**
 * zd_usb_disable_tx - disable transmission
 * @usb: the zd1211rw-private USB structure
 *
 * Frees all URBs in the free list and marks the transmission as disabled.
 */
void zd_usb_disable_tx(struct zd_usb *usb)
{
	struct zd_usb_tx *tx = &usb->tx;
	unsigned long flags;

	atomic_set(&tx->enabled, 0);

	/* kill all submitted tx-urbs */
	usb_kill_anchored_urbs(&tx->submitted);

	spin_lock_irqsave(&tx->lock, flags);
	WARN_ON(!skb_queue_empty(&tx->submitted_skbs));
	WARN_ON(tx->submitted_urbs != 0);
	tx->submitted_urbs = 0;
	spin_unlock_irqrestore(&tx->lock, flags);

	/* The stopped state is ignored, relying on ieee80211_wake_queues()
	 * in a potentionally following zd_usb_enable_tx().
	 */
}

/**
 * zd_usb_enable_tx - enables transmission
 * @usb: a &struct zd_usb pointer
 *
 * This function enables transmission and prepares the &zd_usb_tx data
 * structure.
 */
void zd_usb_enable_tx(struct zd_usb *usb)
{
	unsigned long flags;
	struct zd_usb_tx *tx = &usb->tx;

	spin_lock_irqsave(&tx->lock, flags);
	atomic_set(&tx->enabled, 1);
	tx->submitted_urbs = 0;
	ieee80211_wake_queues(zd_usb_to_hw(usb));
	tx->stopped = 0;
	spin_unlock_irqrestore(&tx->lock, flags);
}

static void tx_dec_submitted_urbs(struct zd_usb *usb)
{
	struct zd_usb_tx *tx = &usb->tx;
	unsigned long flags;

	spin_lock_irqsave(&tx->lock, flags);
	--tx->submitted_urbs;
	if (tx->stopped && tx->submitted_urbs <= ZD_USB_TX_LOW) {
		ieee80211_wake_queues(zd_usb_to_hw(usb));
		tx->stopped = 0;
	}
	spin_unlock_irqrestore(&tx->lock, flags);
}

static void tx_inc_submitted_urbs(struct zd_usb *usb)
{
	struct zd_usb_tx *tx = &usb->tx;
	unsigned long flags;

	spin_lock_irqsave(&tx->lock, flags);
	++tx->submitted_urbs;
	if (!tx->stopped && tx->submitted_urbs > ZD_USB_TX_HIGH) {
		ieee80211_stop_queues(zd_usb_to_hw(usb));
		tx->stopped = 1;
	}
	spin_unlock_irqrestore(&tx->lock, flags);
}

/**
 * tx_urb_complete - completes the execution of an URB
 * @urb: a URB
 *
 * This function is called if the URB has been transferred to a device or an
 * error has happened.
 */
static void tx_urb_complete(struct urb *urb)
{
	int r;
	struct sk_buff *skb;
	struct ieee80211_tx_info *info;
	struct zd_usb *usb;
	struct zd_usb_tx *tx;

	skb = (struct sk_buff *)urb->context;
	info = IEEE80211_SKB_CB(skb);
	/*
	 * grab 'usb' pointer before handing off the skb (since
	 * it might be freed by zd_mac_tx_to_dev or mac80211)
	 */
	usb = &zd_hw_mac(info->rate_driver_data[0])->chip.usb;
	tx = &usb->tx;

	switch (urb->status) {
	case 0:
		break;
	case -ESHUTDOWN:
	case -EINVAL:
	case -ENODEV:
	case -ENOENT:
	case -ECONNRESET:
	case -EPIPE:
		dev_dbg_f(urb_dev(urb), "urb %p error %d\n", urb, urb->status);
		break;
	default:
		dev_dbg_f(urb_dev(urb), "urb %p error %d\n", urb, urb->status);
		goto resubmit;
	}
free_urb:
	skb_unlink(skb, &usb->tx.submitted_skbs);
	zd_mac_tx_to_dev(skb, urb->status);
	usb_free_urb(urb);
	tx_dec_submitted_urbs(usb);
	return;
resubmit:
	usb_anchor_urb(urb, &tx->submitted);
	r = usb_submit_urb(urb, GFP_ATOMIC);
	if (r) {
		usb_unanchor_urb(urb);
		dev_dbg_f(urb_dev(urb), "error resubmit urb %p %d\n", urb, r);
		goto free_urb;
	}
}

/**
 * zd_usb_tx: initiates transfer of a frame of the device
 *
 * @usb: the zd1211rw-private USB structure
 * @skb: a &struct sk_buff pointer
 *
 * This function tranmits a frame to the device. It doesn't wait for
 * completion. The frame must contain the control set and have all the
 * control set information available.
 *
 * The function returns 0 if the transfer has been successfully initiated.
 */
int zd_usb_tx(struct zd_usb *usb, struct sk_buff *skb)
{
	int r;
	struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
	struct usb_device *udev = zd_usb_to_usbdev(usb);
	struct urb *urb;
	struct zd_usb_tx *tx = &usb->tx;

	if (!atomic_read(&tx->enabled)) {
		r = -ENOENT;
		goto out;
	}

	urb = usb_alloc_urb(0, GFP_ATOMIC);
	if (!urb) {
		r = -ENOMEM;
		goto out;
	}

	usb_fill_bulk_urb(urb, udev, usb_sndbulkpipe(udev, EP_DATA_OUT),
		          skb->data, skb->len, tx_urb_complete, skb);

	info->rate_driver_data[1] = (void *)jiffies;
	skb_queue_tail(&tx->submitted_skbs, skb);
	usb_anchor_urb(urb, &tx->submitted);

	r = usb_submit_urb(urb, GFP_ATOMIC);
	if (r) {
		dev_dbg_f(zd_usb_dev(usb), "error submit urb %p %d\n", urb, r);
		usb_unanchor_urb(urb);
		skb_unlink(skb, &tx->submitted_skbs);
		goto error;
	}
	tx_inc_submitted_urbs(usb);
	return 0;
error:
	usb_free_urb(urb);
out:
	return r;
}

static bool zd_tx_timeout(struct zd_usb *usb)
{
	struct zd_usb_tx *tx = &usb->tx;
	struct sk_buff_head *q = &tx->submitted_skbs;
	struct sk_buff *skb, *skbnext;
	struct ieee80211_tx_info *info;
	unsigned long flags, trans_start;
	bool have_timedout = false;

	spin_lock_irqsave(&q->lock, flags);
	skb_queue_walk_safe(q, skb, skbnext) {
		info = IEEE80211_SKB_CB(skb);
		trans_start = (unsigned long)info->rate_driver_data[1];

		if (time_is_before_jiffies(trans_start + ZD_TX_TIMEOUT)) {
			have_timedout = true;
			break;
		}
	}
	spin_unlock_irqrestore(&q->lock, flags);

	return have_timedout;
}

static void zd_tx_watchdog_handler(struct work_struct *work)
{
	struct zd_usb *usb =
		container_of(work, struct zd_usb, tx.watchdog_work.work);
	struct zd_usb_tx *tx = &usb->tx;

	if (!atomic_read(&tx->enabled) || !tx->watchdog_enabled)
		goto out;
	if (!zd_tx_timeout(usb))
		goto out;

	/* TX halted, try reset */
	dev_warn(zd_usb_dev(usb), "TX-stall detected, resetting device...");

	usb_queue_reset_device(usb->intf);

	/* reset will stop this worker, don't rearm */
	return;
out:
	queue_delayed_work(zd_workqueue, &tx->watchdog_work,
			   ZD_TX_WATCHDOG_INTERVAL);
}

void zd_tx_watchdog_enable(struct zd_usb *usb)
{
	struct zd_usb_tx *tx = &usb->tx;

	if (!tx->watchdog_enabled) {
		dev_dbg_f(zd_usb_dev(usb), "\n");
		queue_delayed_work(zd_workqueue, &tx->watchdog_work,
				   ZD_TX_WATCHDOG_INTERVAL);
		tx->watchdog_enabled = 1;
	}
}

void zd_tx_watchdog_disable(struct zd_usb *usb)
{
	struct zd_usb_tx *tx = &usb->tx;

	if (tx->watchdog_enabled) {
		dev_dbg_f(zd_usb_dev(usb), "\n");
		tx->watchdog_enabled = 0;
		cancel_delayed_work_sync(&tx->watchdog_work);
	}
}

static void zd_rx_idle_timer_handler(struct work_struct *work)
{
	struct zd_usb *usb =
		container_of(work, struct zd_usb, rx.idle_work.work);
	struct zd_mac *mac = zd_usb_to_mac(usb);

	if (!test_bit(ZD_DEVICE_RUNNING, &mac->flags))
		return;

	dev_dbg_f(zd_usb_dev(usb), "\n");

	/* 30 seconds since last rx, reset rx */
	zd_usb_reset_rx(usb);
}

static void zd_usb_reset_rx_idle_timer_tasklet(unsigned long param)
{
	struct zd_usb *usb = (struct zd_usb *)param;

	zd_usb_reset_rx_idle_timer(usb);
}

void zd_usb_reset_rx_idle_timer(struct zd_usb *usb)
{
	struct zd_usb_rx *rx = &usb->rx;

	mod_delayed_work(zd_workqueue, &rx->idle_work, ZD_RX_IDLE_INTERVAL);
}

static inline void init_usb_interrupt(struct zd_usb *usb)
{
	struct zd_usb_interrupt *intr = &usb->intr;

	spin_lock_init(&intr->lock);
	intr->interval = int_urb_interval(zd_usb_to_usbdev(usb));
	init_completion(&intr->read_regs.completion);
	atomic_set(&intr->read_regs_enabled, 0);
	intr->read_regs.cr_int_addr = cpu_to_le16((u16)CR_INTERRUPT);
}

static inline void init_usb_rx(struct zd_usb *usb)
{
	struct zd_usb_rx *rx = &usb->rx;

	spin_lock_init(&rx->lock);
	mutex_init(&rx->setup_mutex);
	if (interface_to_usbdev(usb->intf)->speed == USB_SPEED_HIGH) {
		rx->usb_packet_size = 512;
	} else {
		rx->usb_packet_size = 64;
	}
	ZD_ASSERT(rx->fragment_length == 0);
	INIT_DELAYED_WORK(&rx->idle_work, zd_rx_idle_timer_handler);
	rx->reset_timer_tasklet.func = zd_usb_reset_rx_idle_timer_tasklet;
	rx->reset_timer_tasklet.data = (unsigned long)usb;
}

static inline void init_usb_tx(struct zd_usb *usb)
{
	struct zd_usb_tx *tx = &usb->tx;

	spin_lock_init(&tx->lock);
	atomic_set(&tx->enabled, 0);
	tx->stopped = 0;
	skb_queue_head_init(&tx->submitted_skbs);
	init_usb_anchor(&tx->submitted);
	tx->submitted_urbs = 0;
	tx->watchdog_enabled = 0;
	INIT_DELAYED_WORK(&tx->watchdog_work, zd_tx_watchdog_handler);
}

void zd_usb_init(struct zd_usb *usb, struct ieee80211_hw *hw,
	         struct usb_interface *intf)
{
	memset(usb, 0, sizeof(*usb));
	usb->intf = usb_get_intf(intf);
	usb_set_intfdata(usb->intf, hw);
	init_usb_anchor(&usb->submitted_cmds);
	init_usb_interrupt(usb);
	init_usb_tx(usb);
	init_usb_rx(usb);
}

void zd_usb_clear(struct zd_usb *usb)
{
	usb_set_intfdata(usb->intf, NULL);
	usb_put_intf(usb->intf);
	ZD_MEMCLEAR(usb, sizeof(*usb));
	/* FIXME: usb_interrupt, usb_tx, usb_rx? */
}

static const char *speed(enum usb_device_speed speed)
{
	switch (speed) {
	case USB_SPEED_LOW:
		return "low";
	case USB_SPEED_FULL:
		return "full";
	case USB_SPEED_HIGH:
		return "high";
	default:
		return "unknown speed";
	}
}

static int scnprint_id(struct usb_device *udev, char *buffer, size_t size)
{
	return scnprintf(buffer, size, "%04hx:%04hx v%04hx %s",
		le16_to_cpu(udev->descriptor.idVendor),
		le16_to_cpu(udev->descriptor.idProduct),
		get_bcdDevice(udev),
		speed(udev->speed));
}

int zd_usb_scnprint_id(struct zd_usb *usb, char *buffer, size_t size)
{
	struct usb_device *udev = interface_to_usbdev(usb->intf);
	return scnprint_id(udev, buffer, size);
}

#ifdef DEBUG
static void print_id(struct usb_device *udev)
{
	char buffer[40];

	scnprint_id(udev, buffer, sizeof(buffer));
	buffer[sizeof(buffer)-1] = 0;
	dev_dbg_f(&udev->dev, "%s\n", buffer);
}
#else
#define print_id(udev) do { } while (0)
#endif

static int eject_installer(struct usb_interface *intf)
{
	struct usb_device *udev = interface_to_usbdev(intf);
	struct usb_host_interface *iface_desc = &intf->altsetting[0];
	struct usb_endpoint_descriptor *endpoint;
	unsigned char *cmd;
	u8 bulk_out_ep;
	int r;

	/* Find bulk out endpoint */
	for (r = 1; r >= 0; r--) {
		endpoint = &iface_desc->endpoint[r].desc;
		if (usb_endpoint_dir_out(endpoint) &&
		    usb_endpoint_xfer_bulk(endpoint)) {
			bulk_out_ep = endpoint->bEndpointAddress;
			break;
		}
	}
	if (r == -1) {
		dev_err(&udev->dev,
			"zd1211rw: Could not find bulk out endpoint\n");
		return -ENODEV;
	}

	cmd = kzalloc(31, GFP_KERNEL);
	if (cmd == NULL)
		return -ENODEV;

	/* USB bulk command block */
	cmd[0] = 0x55;	/* bulk command signature */
	cmd[1] = 0x53;	/* bulk command signature */
	cmd[2] = 0x42;	/* bulk command signature */
	cmd[3] = 0x43;	/* bulk command signature */
	cmd[14] = 6;	/* command length */

	cmd[15] = 0x1b;	/* SCSI command: START STOP UNIT */
	cmd[19] = 0x2;	/* eject disc */

	dev_info(&udev->dev, "Ejecting virtual installer media...\n");
	r = usb_bulk_msg(udev, usb_sndbulkpipe(udev, bulk_out_ep),
		cmd, 31, NULL, 2000);
	kfree(cmd);
	if (r)
		return r;

	/* At this point, the device disconnects and reconnects with the real
	 * ID numbers. */

	usb_set_intfdata(intf, NULL);
	return 0;
}

int zd_usb_init_hw(struct zd_usb *usb)
{
	int r;
	struct zd_mac *mac = zd_usb_to_mac(usb);

	dev_dbg_f(zd_usb_dev(usb), "\n");

	r = upload_firmware(usb);
	if (r) {
		dev_err(zd_usb_dev(usb),
		       "couldn't load firmware. Error number %d\n", r);
		return r;
	}

	r = usb_reset_configuration(zd_usb_to_usbdev(usb));
	if (r) {
		dev_dbg_f(zd_usb_dev(usb),
			"couldn't reset configuration. Error number %d\n", r);
		return r;
	}

	r = zd_mac_init_hw(mac->hw);
	if (r) {
		dev_dbg_f(zd_usb_dev(usb),
		         "couldn't initialize mac. Error number %d\n", r);
		return r;
	}

	usb->initialized = 1;
	return 0;
}

static int probe(struct usb_interface *intf, const struct usb_device_id *id)
{
	int r;
	struct usb_device *udev = interface_to_usbdev(intf);
	struct zd_usb *usb;
	struct ieee80211_hw *hw = NULL;

	print_id(udev);

	if (id->driver_info & DEVICE_INSTALLER)
		return eject_installer(intf);

	switch (udev->speed) {
	case USB_SPEED_LOW:
	case USB_SPEED_FULL:
	case USB_SPEED_HIGH:
		break;
	default:
		dev_dbg_f(&intf->dev, "Unknown USB speed\n");
		r = -ENODEV;
		goto error;
	}

	r = usb_reset_device(udev);
	if (r) {
		dev_err(&intf->dev,
			"couldn't reset usb device. Error number %d\n", r);
		goto error;
	}

	hw = zd_mac_alloc_hw(intf);
	if (hw == NULL) {
		r = -ENOMEM;
		goto error;
	}

	usb = &zd_hw_mac(hw)->chip.usb;
	usb->is_zd1211b = (id->driver_info == DEVICE_ZD1211B) != 0;

	r = zd_mac_preinit_hw(hw);
	if (r) {
		dev_dbg_f(&intf->dev,
		         "couldn't initialize mac. Error number %d\n", r);
		goto error;
	}

	r = ieee80211_register_hw(hw);
	if (r) {
		dev_dbg_f(&intf->dev,
			 "couldn't register device. Error number %d\n", r);
		goto error;
	}

	dev_dbg_f(&intf->dev, "successful\n");
	dev_info(&intf->dev, "%s\n", wiphy_name(hw->wiphy));
	return 0;
error:
	usb_reset_device(interface_to_usbdev(intf));
	if (hw) {
		zd_mac_clear(zd_hw_mac(hw));
		ieee80211_free_hw(hw);
	}
	return r;
}

static void disconnect(struct usb_interface *intf)
{
	struct ieee80211_hw *hw = zd_intf_to_hw(intf);
	struct zd_mac *mac;
	struct zd_usb *usb;

	/* Either something really bad happened, or we're just dealing with
	 * a DEVICE_INSTALLER. */
	if (hw == NULL)
		return;

	mac = zd_hw_mac(hw);
	usb = &mac->chip.usb;

	dev_dbg_f(zd_usb_dev(usb), "\n");

	ieee80211_unregister_hw(hw);

	/* Just in case something has gone wrong! */
	zd_usb_disable_tx(usb);
	zd_usb_disable_rx(usb);
	zd_usb_disable_int(usb);

	/* If the disconnect has been caused by a removal of the
	 * driver module, the reset allows reloading of the driver. If the
	 * reset will not be executed here, the upload of the firmware in the
	 * probe function caused by the reloading of the driver will fail.
	 */
	usb_reset_device(interface_to_usbdev(intf));

	zd_mac_clear(mac);
	ieee80211_free_hw(hw);
	dev_dbg(&intf->dev, "disconnected\n");
}

static void zd_usb_resume(struct zd_usb *usb)
{
	struct zd_mac *mac = zd_usb_to_mac(usb);
	int r;

	dev_dbg_f(zd_usb_dev(usb), "\n");

	r = zd_op_start(zd_usb_to_hw(usb));
	if (r < 0) {
		dev_warn(zd_usb_dev(usb), "Device resume failed "
			 "with error code %d. Retrying...\n", r);
		if (usb->was_running)
			set_bit(ZD_DEVICE_RUNNING, &mac->flags);
		usb_queue_reset_device(usb->intf);
		return;
	}

	if (mac->type != NL80211_IFTYPE_UNSPECIFIED) {
		r = zd_restore_settings(mac);
		if (r < 0) {
			dev_dbg(zd_usb_dev(usb),
				"failed to restore settings, %d\n", r);
			return;
		}
	}
}

static void zd_usb_stop(struct zd_usb *usb)
{
	dev_dbg_f(zd_usb_dev(usb), "\n");

	zd_op_stop(zd_usb_to_hw(usb));

	zd_usb_disable_tx(usb);
	zd_usb_disable_rx(usb);
	zd_usb_disable_int(usb);

	usb->initialized = 0;
}

static int pre_reset(struct usb_interface *intf)
{
	struct ieee80211_hw *hw = usb_get_intfdata(intf);
	struct zd_mac *mac;
	struct zd_usb *usb;

	if (!hw || intf->condition != USB_INTERFACE_BOUND)
		return 0;

	mac = zd_hw_mac(hw);
	usb = &mac->chip.usb;

	usb->was_running = test_bit(ZD_DEVICE_RUNNING, &mac->flags);

	zd_usb_stop(usb);

	mutex_lock(&mac->chip.mutex);
	return 0;
}

static int post_reset(struct usb_interface *intf)
{
	struct ieee80211_hw *hw = usb_get_intfdata(intf);
	struct zd_mac *mac;
	struct zd_usb *usb;

	if (!hw || intf->condition != USB_INTERFACE_BOUND)
		return 0;

	mac = zd_hw_mac(hw);
	usb = &mac->chip.usb;

	mutex_unlock(&mac->chip.mutex);

	if (usb->was_running)
		zd_usb_resume(usb);
	return 0;
}

static struct usb_driver driver = {
	.name		= KBUILD_MODNAME,
	.id_table	= usb_ids,
	.probe		= probe,
	.disconnect	= disconnect,
	.pre_reset	= pre_reset,
	.post_reset	= post_reset,
	.disable_hub_initiated_lpm = 1,
};

struct workqueue_struct *zd_workqueue;

static int __init usb_init(void)
{
	int r;

	pr_debug("%s usb_init()\n", driver.name);

	zd_workqueue = create_singlethread_workqueue(driver.name);
	if (zd_workqueue == NULL) {
		printk(KERN_ERR "%s couldn't create workqueue\n", driver.name);
		return -ENOMEM;
	}

	r = usb_register(&driver);
	if (r) {
		destroy_workqueue(zd_workqueue);
		printk(KERN_ERR "%s usb_register() failed. Error number %d\n",
		       driver.name, r);
		return r;
	}

	pr_debug("%s initialized\n", driver.name);
	return 0;
}

static void __exit usb_exit(void)
{
	pr_debug("%s usb_exit()\n", driver.name);
	usb_deregister(&driver);
	destroy_workqueue(zd_workqueue);
}

module_init(usb_init);
module_exit(usb_exit);

static int zd_ep_regs_out_msg(struct usb_device *udev, void *data, int len,
			      int *actual_length, int timeout)
{
	/* In USB 2.0 mode EP_REGS_OUT endpoint is interrupt type. However in
	 * USB 1.1 mode endpoint is bulk. Select correct type URB by endpoint
	 * descriptor.
	 */
	struct usb_host_endpoint *ep;
	unsigned int pipe;

	pipe = usb_sndintpipe(udev, EP_REGS_OUT);
	ep = usb_pipe_endpoint(udev, pipe);
	if (!ep)
		return -EINVAL;

	if (usb_endpoint_xfer_int(&ep->desc)) {
		return usb_interrupt_msg(udev, pipe, data, len,
					 actual_length, timeout);
	} else {
		pipe = usb_sndbulkpipe(udev, EP_REGS_OUT);
		return usb_bulk_msg(udev, pipe, data, len, actual_length,
				    timeout);
	}
}

static int usb_int_regs_length(unsigned int count)
{
	return sizeof(struct usb_int_regs) + count * sizeof(struct reg_data);
}

static void prepare_read_regs_int(struct zd_usb *usb,
				  struct usb_req_read_regs *req,
				  unsigned int count)
{
	struct zd_usb_interrupt *intr = &usb->intr;

	spin_lock_irq(&intr->lock);
	atomic_set(&intr->read_regs_enabled, 1);
	intr->read_regs.req = req;
	intr->read_regs.req_count = count;
	INIT_COMPLETION(intr->read_regs.completion);
	spin_unlock_irq(&intr->lock);
}

static void disable_read_regs_int(struct zd_usb *usb)
{
	struct zd_usb_interrupt *intr = &usb->intr;

	spin_lock_irq(&intr->lock);
	atomic_set(&intr->read_regs_enabled, 0);
	spin_unlock_irq(&intr->lock);
}

static bool check_read_regs(struct zd_usb *usb, struct usb_req_read_regs *req,
			    unsigned int count)
{
	int i;
	struct zd_usb_interrupt *intr = &usb->intr;
	struct read_regs_int *rr = &intr->read_regs;
	struct usb_int_regs *regs = (struct usb_int_regs *)rr->buffer;

	/* The created block size seems to be larger than expected.
	 * However results appear to be correct.
	 */
	if (rr->length < usb_int_regs_length(count)) {
		dev_dbg_f(zd_usb_dev(usb),
			 "error: actual length %d less than expected %d\n",
			 rr->length, usb_int_regs_length(count));
		return false;
	}

	if (rr->length > sizeof(rr->buffer)) {
		dev_dbg_f(zd_usb_dev(usb),
			 "error: actual length %d exceeds buffer size %zu\n",
			 rr->length, sizeof(rr->buffer));
		return false;
	}

	for (i = 0; i < count; i++) {
		struct reg_data *rd = &regs->regs[i];
		if (rd->addr != req->addr[i]) {
			dev_dbg_f(zd_usb_dev(usb),
				 "rd[%d] addr %#06hx expected %#06hx\n", i,
				 le16_to_cpu(rd->addr),
				 le16_to_cpu(req->addr[i]));
			return false;
		}
	}

	return true;
}

static int get_results(struct zd_usb *usb, u16 *values,
		       struct usb_req_read_regs *req, unsigned int count,
		       bool *retry)
{
	int r;
	int i;
	struct zd_usb_interrupt *intr = &usb->intr;
	struct read_regs_int *rr = &intr->read_regs;
	struct usb_int_regs *regs = (struct usb_int_regs *)rr->buffer;

	spin_lock_irq(&intr->lock);

	r = -EIO;

	/* Read failed because firmware bug? */
	*retry = !!intr->read_regs_int_overridden;
	if (*retry)
		goto error_unlock;

	if (!check_read_regs(usb, req, count)) {
		dev_dbg_f(zd_usb_dev(usb), "error: invalid read regs\n");
		goto error_unlock;
	}

	for (i = 0; i < count; i++) {
		struct reg_data *rd = &regs->regs[i];
		values[i] = le16_to_cpu(rd->value);
	}

	r = 0;
error_unlock:
	spin_unlock_irq(&intr->lock);
	return r;
}

int zd_usb_ioread16v(struct zd_usb *usb, u16 *values,
	             const zd_addr_t *addresses, unsigned int count)
{
	int r, i, req_len, actual_req_len, try_count = 0;
	struct usb_device *udev;
	struct usb_req_read_regs *req = NULL;
	unsigned long timeout;
	bool retry = false;

	if (count < 1) {
		dev_dbg_f(zd_usb_dev(usb), "error: count is zero\n");
		return -EINVAL;
	}
	if (count > USB_MAX_IOREAD16_COUNT) {
		dev_dbg_f(zd_usb_dev(usb),
			 "error: count %u exceeds possible max %u\n",
			 count, USB_MAX_IOREAD16_COUNT);
		return -EINVAL;
	}
	if (in_atomic()) {
		dev_dbg_f(zd_usb_dev(usb),
			 "error: io in atomic context not supported\n");
		return -EWOULDBLOCK;
	}
	if (!usb_int_enabled(usb)) {
		dev_dbg_f(zd_usb_dev(usb),
			  "error: usb interrupt not enabled\n");
		return -EWOULDBLOCK;
	}

	ZD_ASSERT(mutex_is_locked(&zd_usb_to_chip(usb)->mutex));
	BUILD_BUG_ON(sizeof(struct usb_req_read_regs) + USB_MAX_IOREAD16_COUNT *
		     sizeof(__le16) > sizeof(usb->req_buf));
	BUG_ON(sizeof(struct usb_req_read_regs) + count * sizeof(__le16) >
	       sizeof(usb->req_buf));

	req_len = sizeof(struct usb_req_read_regs) + count * sizeof(__le16);
	req = (void *)usb->req_buf;

	req->id = cpu_to_le16(USB_REQ_READ_REGS);
	for (i = 0; i < count; i++)
		req->addr[i] = cpu_to_le16((u16)addresses[i]);

retry_read:
	try_count++;
	udev = zd_usb_to_usbdev(usb);
	prepare_read_regs_int(usb, req, count);
	r = zd_ep_regs_out_msg(udev, req, req_len, &actual_req_len, 50 /*ms*/);
	if (r) {
		dev_dbg_f(zd_usb_dev(usb),
			"error in zd_ep_regs_out_msg(). Error number %d\n", r);
		goto error;
	}
	if (req_len != actual_req_len) {
		dev_dbg_f(zd_usb_dev(usb), "error in zd_ep_regs_out_msg()\n"
			" req_len %d != actual_req_len %d\n",
			req_len, actual_req_len);
		r = -EIO;
		goto error;
	}

	timeout = wait_for_completion_timeout(&usb->intr.read_regs.completion,
					      msecs_to_jiffies(50));
	if (!timeout) {
		disable_read_regs_int(usb);
		dev_dbg_f(zd_usb_dev(usb), "read timed out\n");
		r = -ETIMEDOUT;
		goto error;
	}

	r = get_results(usb, values, req, count, &retry);
	if (retry && try_count < 20) {
		dev_dbg_f(zd_usb_dev(usb), "read retry, tries so far: %d\n",
				try_count);
		goto retry_read;
	}
error:
	return r;
}

static void iowrite16v_urb_complete(struct urb *urb)
{
	struct zd_usb *usb = urb->context;

	if (urb->status && !usb->cmd_error)
		usb->cmd_error = urb->status;

	if (!usb->cmd_error &&
			urb->actual_length != urb->transfer_buffer_length)
		usb->cmd_error = -EIO;
}

static int zd_submit_waiting_urb(struct zd_usb *usb, bool last)
{
	int r = 0;
	struct urb *urb = usb->urb_async_waiting;

	if (!urb)
		return 0;

	usb->urb_async_waiting = NULL;

	if (!last)
		urb->transfer_flags |= URB_NO_INTERRUPT;

	usb_anchor_urb(urb, &usb->submitted_cmds);
	r = usb_submit_urb(urb, GFP_KERNEL);
	if (r) {
		usb_unanchor_urb(urb);
		dev_dbg_f(zd_usb_dev(usb),
			"error in usb_submit_urb(). Error number %d\n", r);
		goto error;
	}

	/* fall-through with r == 0 */
error:
	usb_free_urb(urb);
	return r;
}

void zd_usb_iowrite16v_async_start(struct zd_usb *usb)
{
	ZD_ASSERT(usb_anchor_empty(&usb->submitted_cmds));
	ZD_ASSERT(usb->urb_async_waiting == NULL);
	ZD_ASSERT(!usb->in_async);

	ZD_ASSERT(mutex_is_locked(&zd_usb_to_chip(usb)->mutex));

	usb->in_async = 1;
	usb->cmd_error = 0;
	usb->urb_async_waiting = NULL;
}

int zd_usb_iowrite16v_async_end(struct zd_usb *usb, unsigned int timeout)
{
	int r;

	ZD_ASSERT(mutex_is_locked(&zd_usb_to_chip(usb)->mutex));
	ZD_ASSERT(usb->in_async);

	/* Submit last iowrite16v URB */
	r = zd_submit_waiting_urb(usb, true);
	if (r) {
		dev_dbg_f(zd_usb_dev(usb),
			"error in zd_submit_waiting_usb(). "
			"Error number %d\n", r);

		usb_kill_anchored_urbs(&usb->submitted_cmds);
		goto error;
	}

	if (timeout)
		timeout = usb_wait_anchor_empty_timeout(&usb->submitted_cmds,
							timeout);
	if (!timeout) {
		usb_kill_anchored_urbs(&usb->submitted_cmds);
		if (usb->cmd_error == -ENOENT) {
			dev_dbg_f(zd_usb_dev(usb), "timed out");
			r = -ETIMEDOUT;
			goto error;
		}
	}

	r = usb->cmd_error;
error:
	usb->in_async = 0;
	return r;
}

int zd_usb_iowrite16v_async(struct zd_usb *usb, const struct zd_ioreq16 *ioreqs,
			    unsigned int count)
{
	int r;
	struct usb_device *udev;
	struct usb_req_write_regs *req = NULL;
	int i, req_len;
	struct urb *urb;
	struct usb_host_endpoint *ep;

	ZD_ASSERT(mutex_is_locked(&zd_usb_to_chip(usb)->mutex));
	ZD_ASSERT(usb->in_async);

	if (count == 0)
		return 0;
	if (count > USB_MAX_IOWRITE16_COUNT) {
		dev_dbg_f(zd_usb_dev(usb),
			"error: count %u exceeds possible max %u\n",
			count, USB_MAX_IOWRITE16_COUNT);
		return -EINVAL;
	}
	if (in_atomic()) {
		dev_dbg_f(zd_usb_dev(usb),
			"error: io in atomic context not supported\n");
		return -EWOULDBLOCK;
	}

	udev = zd_usb_to_usbdev(usb);

	ep = usb_pipe_endpoint(udev, usb_sndintpipe(udev, EP_REGS_OUT));
	if (!ep)
		return -ENOENT;

	urb = usb_alloc_urb(0, GFP_KERNEL);
	if (!urb)
		return -ENOMEM;

	req_len = sizeof(struct usb_req_write_regs) +
		  count * sizeof(struct reg_data);
	req = kmalloc(req_len, GFP_KERNEL);
	if (!req) {
		r = -ENOMEM;
		goto error;
	}

	req->id = cpu_to_le16(USB_REQ_WRITE_REGS);
	for (i = 0; i < count; i++) {
		struct reg_data *rw  = &req->reg_writes[i];
		rw->addr = cpu_to_le16((u16)ioreqs[i].addr);
		rw->value = cpu_to_le16(ioreqs[i].value);
	}

	/* In USB 2.0 mode endpoint is interrupt type. However in USB 1.1 mode
	 * endpoint is bulk. Select correct type URB by endpoint descriptor.
	 */
	if (usb_endpoint_xfer_int(&ep->desc))
		usb_fill_int_urb(urb, udev, usb_sndintpipe(udev, EP_REGS_OUT),
				 req, req_len, iowrite16v_urb_complete, usb,
				 ep->desc.bInterval);
	else
		usb_fill_bulk_urb(urb, udev, usb_sndbulkpipe(udev, EP_REGS_OUT),
				  req, req_len, iowrite16v_urb_complete, usb);

	urb->transfer_flags |= URB_FREE_BUFFER;

	/* Submit previous URB */
	r = zd_submit_waiting_urb(usb, false);
	if (r) {
		dev_dbg_f(zd_usb_dev(usb),
			"error in zd_submit_waiting_usb(). "
			"Error number %d\n", r);
		goto error;
	}

	/* Delay submit so that URB_NO_INTERRUPT flag can be set for all URBs
	 * of currect batch except for very last.
	 */
	usb->urb_async_waiting = urb;
	return 0;
error:
	usb_free_urb(urb);
	return r;
}

int zd_usb_iowrite16v(struct zd_usb *usb, const struct zd_ioreq16 *ioreqs,
			unsigned int count)
{
	int r;

	zd_usb_iowrite16v_async_start(usb);
	r = zd_usb_iowrite16v_async(usb, ioreqs, count);
	if (r) {
		zd_usb_iowrite16v_async_end(usb, 0);
		return r;
	}
	return zd_usb_iowrite16v_async_end(usb, 50 /* ms */);
}

int zd_usb_rfwrite(struct zd_usb *usb, u32 value, u8 bits)
{
	int r;
	struct usb_device *udev;
	struct usb_req_rfwrite *req = NULL;
	int i, req_len, actual_req_len;
	u16 bit_value_template;

	if (in_atomic()) {
		dev_dbg_f(zd_usb_dev(usb),
			"error: io in atomic context not supported\n");
		return -EWOULDBLOCK;
	}
	if (bits < USB_MIN_RFWRITE_BIT_COUNT) {
		dev_dbg_f(zd_usb_dev(usb),
			"error: bits %d are smaller than"
			" USB_MIN_RFWRITE_BIT_COUNT %d\n",
			bits, USB_MIN_RFWRITE_BIT_COUNT);
		return -EINVAL;
	}
	if (bits > USB_MAX_RFWRITE_BIT_COUNT) {
		dev_dbg_f(zd_usb_dev(usb),
			"error: bits %d exceed USB_MAX_RFWRITE_BIT_COUNT %d\n",
			bits, USB_MAX_RFWRITE_BIT_COUNT);
		return -EINVAL;
	}
#ifdef DEBUG
	if (value & (~0UL << bits)) {
		dev_dbg_f(zd_usb_dev(usb),
			"error: value %#09x has bits >= %d set\n",
			value, bits);
		return -EINVAL;
	}
#endif /* DEBUG */

	dev_dbg_f(zd_usb_dev(usb), "value %#09x bits %d\n", value, bits);

	r = zd_usb_ioread16(usb, &bit_value_template, ZD_CR203);
	if (r) {
		dev_dbg_f(zd_usb_dev(usb),
			"error %d: Couldn't read ZD_CR203\n", r);
		return r;
	}
	bit_value_template &= ~(RF_IF_LE|RF_CLK|RF_DATA);

	ZD_ASSERT(mutex_is_locked(&zd_usb_to_chip(usb)->mutex));
	BUILD_BUG_ON(sizeof(struct usb_req_rfwrite) +
		     USB_MAX_RFWRITE_BIT_COUNT * sizeof(__le16) >
		     sizeof(usb->req_buf));
	BUG_ON(sizeof(struct usb_req_rfwrite) + bits * sizeof(__le16) >
	       sizeof(usb->req_buf));

	req_len = sizeof(struct usb_req_rfwrite) + bits * sizeof(__le16);
	req = (void *)usb->req_buf;

	req->id = cpu_to_le16(USB_REQ_WRITE_RF);
	/* 1: 3683a, but not used in ZYDAS driver */
	req->value = cpu_to_le16(2);
	req->bits = cpu_to_le16(bits);

	for (i = 0; i < bits; i++) {
		u16 bv = bit_value_template;
		if (value & (1 << (bits-1-i)))
			bv |= RF_DATA;
		req->bit_values[i] = cpu_to_le16(bv);
	}

	udev = zd_usb_to_usbdev(usb);
	r = zd_ep_regs_out_msg(udev, req, req_len, &actual_req_len, 50 /*ms*/);
	if (r) {
		dev_dbg_f(zd_usb_dev(usb),
			"error in zd_ep_regs_out_msg(). Error number %d\n", r);
		goto out;
	}
	if (req_len != actual_req_len) {
		dev_dbg_f(zd_usb_dev(usb), "error in zd_ep_regs_out_msg()"
			" req_len %d != actual_req_len %d\n",
			req_len, actual_req_len);
		r = -EIO;
		goto out;
	}

	/* FALL-THROUGH with r == 0 */
out:
	return r;
}