| #!/usr/bin/perl -w |
| # (c) 2001, Dave Jones. (the file handling bit) |
| # (c) 2005, Joel Schopp <jschopp@austin.ibm.com> (the ugly bit) |
| # (c) 2007,2008, Andy Whitcroft <apw@uk.ibm.com> (new conditions, test suite) |
| # (c) 2008-2010 Andy Whitcroft <apw@canonical.com> |
| # Licensed under the terms of the GNU GPL License version 2 |
| |
| use strict; |
| |
| my $P = $0; |
| $P =~ s@.*/@@g; |
| |
| my $V = '0.32'; |
| |
| use Getopt::Long qw(:config no_auto_abbrev); |
| |
| my $quiet = 0; |
| my $tree = 1; |
| my $chk_signoff = 1; |
| my $chk_patch = 1; |
| my $tst_only; |
| my $emacs = 0; |
| my $terse = 0; |
| my $file = 0; |
| my $check = 0; |
| my $summary = 1; |
| my $mailback = 0; |
| my $summary_file = 0; |
| my $show_types = 0; |
| my $root; |
| my %debug; |
| my %ignore_type = (); |
| my @ignore = (); |
| my $help = 0; |
| my $configuration_file = ".checkpatch.conf"; |
| my $max_line_length = 80; |
| |
| sub help { |
| my ($exitcode) = @_; |
| |
| print << "EOM"; |
| Usage: $P [OPTION]... [FILE]... |
| Version: $V |
| |
| Options: |
| -q, --quiet quiet |
| --no-tree run without a kernel tree |
| --no-signoff do not check for 'Signed-off-by' line |
| --patch treat FILE as patchfile (default) |
| --emacs emacs compile window format |
| --terse one line per report |
| -f, --file treat FILE as regular source file |
| --subjective, --strict enable more subjective tests |
| --ignore TYPE(,TYPE2...) ignore various comma separated message types |
| --max-line-length=n set the maximum line length, if exceeded, warn |
| --show-types show the message "types" in the output |
| --root=PATH PATH to the kernel tree root |
| --no-summary suppress the per-file summary |
| --mailback only produce a report in case of warnings/errors |
| --summary-file include the filename in summary |
| --debug KEY=[0|1] turn on/off debugging of KEY, where KEY is one of |
| 'values', 'possible', 'type', and 'attr' (default |
| is all off) |
| --test-only=WORD report only warnings/errors containing WORD |
| literally |
| -h, --help, --version display this help and exit |
| |
| When FILE is - read standard input. |
| EOM |
| |
| exit($exitcode); |
| } |
| |
| my $conf = which_conf($configuration_file); |
| if (-f $conf) { |
| my @conf_args; |
| open(my $conffile, '<', "$conf") |
| or warn "$P: Can't find a readable $configuration_file file $!\n"; |
| |
| while (<$conffile>) { |
| my $line = $_; |
| |
| $line =~ s/\s*\n?$//g; |
| $line =~ s/^\s*//g; |
| $line =~ s/\s+/ /g; |
| |
| next if ($line =~ m/^\s*#/); |
| next if ($line =~ m/^\s*$/); |
| |
| my @words = split(" ", $line); |
| foreach my $word (@words) { |
| last if ($word =~ m/^#/); |
| push (@conf_args, $word); |
| } |
| } |
| close($conffile); |
| unshift(@ARGV, @conf_args) if @conf_args; |
| } |
| |
| GetOptions( |
| 'q|quiet+' => \$quiet, |
| 'tree!' => \$tree, |
| 'signoff!' => \$chk_signoff, |
| 'patch!' => \$chk_patch, |
| 'emacs!' => \$emacs, |
| 'terse!' => \$terse, |
| 'f|file!' => \$file, |
| 'subjective!' => \$check, |
| 'strict!' => \$check, |
| 'ignore=s' => \@ignore, |
| 'show-types!' => \$show_types, |
| 'max-line-length=i' => \$max_line_length, |
| 'root=s' => \$root, |
| 'summary!' => \$summary, |
| 'mailback!' => \$mailback, |
| 'summary-file!' => \$summary_file, |
| |
| 'debug=s' => \%debug, |
| 'test-only=s' => \$tst_only, |
| 'h|help' => \$help, |
| 'version' => \$help |
| ) or help(1); |
| |
| help(0) if ($help); |
| |
| my $exit = 0; |
| |
| if ($#ARGV < 0) { |
| print "$P: no input files\n"; |
| exit(1); |
| } |
| |
| @ignore = split(/,/, join(',',@ignore)); |
| foreach my $word (@ignore) { |
| $word =~ s/\s*\n?$//g; |
| $word =~ s/^\s*//g; |
| $word =~ s/\s+/ /g; |
| $word =~ tr/[a-z]/[A-Z]/; |
| |
| next if ($word =~ m/^\s*#/); |
| next if ($word =~ m/^\s*$/); |
| |
| $ignore_type{$word}++; |
| } |
| |
| my $dbg_values = 0; |
| my $dbg_possible = 0; |
| my $dbg_type = 0; |
| my $dbg_attr = 0; |
| for my $key (keys %debug) { |
| ## no critic |
| eval "\${dbg_$key} = '$debug{$key}';"; |
| die "$@" if ($@); |
| } |
| |
| my $rpt_cleaners = 0; |
| |
| if ($terse) { |
| $emacs = 1; |
| $quiet++; |
| } |
| |
| if ($tree) { |
| if (defined $root) { |
| if (!top_of_kernel_tree($root)) { |
| die "$P: $root: --root does not point at a valid tree\n"; |
| } |
| } else { |
| if (top_of_kernel_tree('.')) { |
| $root = '.'; |
| } elsif ($0 =~ m@(.*)/scripts/[^/]*$@ && |
| top_of_kernel_tree($1)) { |
| $root = $1; |
| } |
| } |
| |
| if (!defined $root) { |
| print "Must be run from the top-level dir. of a kernel tree\n"; |
| exit(2); |
| } |
| } |
| |
| my $emitted_corrupt = 0; |
| |
| our $Ident = qr{ |
| [A-Za-z_][A-Za-z\d_]* |
| (?:\s*\#\#\s*[A-Za-z_][A-Za-z\d_]*)* |
| }x; |
| our $Storage = qr{extern|static|asmlinkage}; |
| our $Sparse = qr{ |
| __user| |
| __kernel| |
| __force| |
| __iomem| |
| __must_check| |
| __init_refok| |
| __kprobes| |
| __ref| |
| __rcu |
| }x; |
| |
| # Notes to $Attribute: |
| # We need \b after 'init' otherwise 'initconst' will cause a false positive in a check |
| our $Attribute = qr{ |
| const| |
| __percpu| |
| __nocast| |
| __safe| |
| __bitwise__| |
| __packed__| |
| __packed2__| |
| __naked| |
| __maybe_unused| |
| __always_unused| |
| __noreturn| |
| __used| |
| __cold| |
| __noclone| |
| __deprecated| |
| __read_mostly| |
| __kprobes| |
| __(?:mem|cpu|dev|)(?:initdata|initconst|init\b)| |
| ____cacheline_aligned| |
| ____cacheline_aligned_in_smp| |
| ____cacheline_internodealigned_in_smp| |
| __weak |
| }x; |
| our $Modifier; |
| our $Inline = qr{inline|__always_inline|noinline}; |
| our $Member = qr{->$Ident|\.$Ident|\[[^]]*\]}; |
| our $Lval = qr{$Ident(?:$Member)*}; |
| |
| our $Float_hex = qr{(?i)0x[0-9a-f]+p-?[0-9]+[fl]?}; |
| our $Float_dec = qr{(?i)(?:[0-9]+\.[0-9]*|[0-9]*\.[0-9]+)(?:e-?[0-9]+)?[fl]?}; |
| our $Float_int = qr{(?i)[0-9]+e-?[0-9]+[fl]?}; |
| our $Float = qr{$Float_hex|$Float_dec|$Float_int}; |
| our $Constant = qr{$Float|(?i)(?:0x[0-9a-f]+|[0-9]+)[ul]*}; |
| our $Assignment = qr{\*\=|/=|%=|\+=|-=|<<=|>>=|&=|\^=|\|=|=}; |
| our $Compare = qr{<=|>=|==|!=|<|>}; |
| our $Operators = qr{ |
| <=|>=|==|!=| |
| =>|->|<<|>>|<|>|!|~| |
| &&|\|\||,|\^|\+\+|--|&|\||\+|-|\*|\/|% |
| }x; |
| |
| our $NonptrType; |
| our $Type; |
| our $Declare; |
| |
| our $NON_ASCII_UTF8 = qr{ |
| [\xC2-\xDF][\x80-\xBF] # non-overlong 2-byte |
| | \xE0[\xA0-\xBF][\x80-\xBF] # excluding overlongs |
| | [\xE1-\xEC\xEE\xEF][\x80-\xBF]{2} # straight 3-byte |
| | \xED[\x80-\x9F][\x80-\xBF] # excluding surrogates |
| | \xF0[\x90-\xBF][\x80-\xBF]{2} # planes 1-3 |
| | [\xF1-\xF3][\x80-\xBF]{3} # planes 4-15 |
| | \xF4[\x80-\x8F][\x80-\xBF]{2} # plane 16 |
| }x; |
| |
| our $UTF8 = qr{ |
| [\x09\x0A\x0D\x20-\x7E] # ASCII |
| | $NON_ASCII_UTF8 |
| }x; |
| |
| our $typeTypedefs = qr{(?x: |
| (?:__)?(?:u|s|be|le)(?:8|16|32|64)| |
| atomic_t |
| )}; |
| |
| our $logFunctions = qr{(?x: |
| printk(?:_ratelimited|_once|)| |
| [a-z0-9]+_(?:printk|emerg|alert|crit|err|warning|warn|notice|info|debug|dbg|vdbg|devel|cont|WARN)(?:_ratelimited|_once|)| |
| WARN(?:_RATELIMIT|_ONCE|)| |
| panic| |
| MODULE_[A-Z_]+ |
| )}; |
| |
| our $signature_tags = qr{(?xi: |
| Signed-off-by:| |
| Acked-by:| |
| Tested-by:| |
| Reviewed-by:| |
| Reported-by:| |
| To:| |
| Cc: |
| )}; |
| |
| our @typeList = ( |
| qr{void}, |
| qr{(?:unsigned\s+)?char}, |
| qr{(?:unsigned\s+)?short}, |
| qr{(?:unsigned\s+)?int}, |
| qr{(?:unsigned\s+)?long}, |
| qr{(?:unsigned\s+)?long\s+int}, |
| qr{(?:unsigned\s+)?long\s+long}, |
| qr{(?:unsigned\s+)?long\s+long\s+int}, |
| qr{unsigned}, |
| qr{float}, |
| qr{double}, |
| qr{bool}, |
| qr{struct\s+$Ident}, |
| qr{union\s+$Ident}, |
| qr{enum\s+$Ident}, |
| qr{${Ident}_t}, |
| qr{${Ident}_handler}, |
| qr{${Ident}_handler_fn}, |
| ); |
| our @modifierList = ( |
| qr{fastcall}, |
| ); |
| |
| our $allowed_asm_includes = qr{(?x: |
| irq| |
| memory |
| )}; |
| # memory.h: ARM has a custom one |
| |
| sub build_types { |
| my $mods = "(?x: \n" . join("|\n ", @modifierList) . "\n)"; |
| my $all = "(?x: \n" . join("|\n ", @typeList) . "\n)"; |
| $Modifier = qr{(?:$Attribute|$Sparse|$mods)}; |
| $NonptrType = qr{ |
| (?:$Modifier\s+|const\s+)* |
| (?: |
| (?:typeof|__typeof__)\s*\([^\)]*\)| |
| (?:$typeTypedefs\b)| |
| (?:${all}\b) |
| ) |
| (?:\s+$Modifier|\s+const)* |
| }x; |
| $Type = qr{ |
| $NonptrType |
| (?:(?:\s|\*|\[\])+\s*const|(?:\s|\*|\[\])+|(?:\s*\[\s*\])+)? |
| (?:\s+$Inline|\s+$Modifier)* |
| }x; |
| $Declare = qr{(?:$Storage\s+)?$Type}; |
| } |
| build_types(); |
| |
| |
| our $Typecast = qr{\s*(\(\s*$NonptrType\s*\)){0,1}\s*}; |
| |
| # Using $balanced_parens, $LvalOrFunc, or $FuncArg |
| # requires at least perl version v5.10.0 |
| # Any use must be runtime checked with $^V |
| |
| our $balanced_parens = qr/(\((?:[^\(\)]++|(?-1))*\))/; |
| our $LvalOrFunc = qr{($Lval)\s*($balanced_parens{0,1})\s*}; |
| our $FuncArg = qr{$Typecast{0,1}($LvalOrFunc|$Constant)}; |
| |
| sub deparenthesize { |
| my ($string) = @_; |
| return "" if (!defined($string)); |
| $string =~ s@^\s*\(\s*@@g; |
| $string =~ s@\s*\)\s*$@@g; |
| $string =~ s@\s+@ @g; |
| return $string; |
| } |
| |
| $chk_signoff = 0 if ($file); |
| |
| my @rawlines = (); |
| my @lines = (); |
| my $vname; |
| for my $filename (@ARGV) { |
| my $FILE; |
| if ($file) { |
| open($FILE, '-|', "diff -u /dev/null $filename") || |
| die "$P: $filename: diff failed - $!\n"; |
| } elsif ($filename eq '-') { |
| open($FILE, '<&STDIN'); |
| } else { |
| open($FILE, '<', "$filename") || |
| die "$P: $filename: open failed - $!\n"; |
| } |
| if ($filename eq '-') { |
| $vname = 'Your patch'; |
| } else { |
| $vname = $filename; |
| } |
| while (<$FILE>) { |
| chomp; |
| push(@rawlines, $_); |
| } |
| close($FILE); |
| if (!process($filename)) { |
| $exit = 1; |
| } |
| @rawlines = (); |
| @lines = (); |
| } |
| |
| exit($exit); |
| |
| sub top_of_kernel_tree { |
| my ($root) = @_; |
| |
| my @tree_check = ( |
| "COPYING", "CREDITS", "Kbuild", "MAINTAINERS", "Makefile", |
| "README", "Documentation", "arch", "include", "drivers", |
| "fs", "init", "ipc", "kernel", "lib", "scripts", |
| ); |
| |
| foreach my $check (@tree_check) { |
| if (! -e $root . '/' . $check) { |
| return 0; |
| } |
| } |
| return 1; |
| } |
| |
| sub parse_email { |
| my ($formatted_email) = @_; |
| |
| my $name = ""; |
| my $address = ""; |
| my $comment = ""; |
| |
| if ($formatted_email =~ /^(.*)<(\S+\@\S+)>(.*)$/) { |
| $name = $1; |
| $address = $2; |
| $comment = $3 if defined $3; |
| } elsif ($formatted_email =~ /^\s*<(\S+\@\S+)>(.*)$/) { |
| $address = $1; |
| $comment = $2 if defined $2; |
| } elsif ($formatted_email =~ /(\S+\@\S+)(.*)$/) { |
| $address = $1; |
| $comment = $2 if defined $2; |
| $formatted_email =~ s/$address.*$//; |
| $name = $formatted_email; |
| $name =~ s/^\s+|\s+$//g; |
| $name =~ s/^\"|\"$//g; |
| # If there's a name left after stripping spaces and |
| # leading quotes, and the address doesn't have both |
| # leading and trailing angle brackets, the address |
| # is invalid. ie: |
| # "joe smith joe@smith.com" bad |
| # "joe smith <joe@smith.com" bad |
| if ($name ne "" && $address !~ /^<[^>]+>$/) { |
| $name = ""; |
| $address = ""; |
| $comment = ""; |
| } |
| } |
| |
| $name =~ s/^\s+|\s+$//g; |
| $name =~ s/^\"|\"$//g; |
| $address =~ s/^\s+|\s+$//g; |
| $address =~ s/^\<|\>$//g; |
| |
| if ($name =~ /[^\w \-]/i) { ##has "must quote" chars |
| $name =~ s/(?<!\\)"/\\"/g; ##escape quotes |
| $name = "\"$name\""; |
| } |
| |
| return ($name, $address, $comment); |
| } |
| |
| sub format_email { |
| my ($name, $address) = @_; |
| |
| my $formatted_email; |
| |
| $name =~ s/^\s+|\s+$//g; |
| $name =~ s/^\"|\"$//g; |
| $address =~ s/^\s+|\s+$//g; |
| |
| if ($name =~ /[^\w \-]/i) { ##has "must quote" chars |
| $name =~ s/(?<!\\)"/\\"/g; ##escape quotes |
| $name = "\"$name\""; |
| } |
| |
| if ("$name" eq "") { |
| $formatted_email = "$address"; |
| } else { |
| $formatted_email = "$name <$address>"; |
| } |
| |
| return $formatted_email; |
| } |
| |
| sub which_conf { |
| my ($conf) = @_; |
| |
| foreach my $path (split(/:/, ".:$ENV{HOME}:.scripts")) { |
| if (-e "$path/$conf") { |
| return "$path/$conf"; |
| } |
| } |
| |
| return ""; |
| } |
| |
| sub expand_tabs { |
| my ($str) = @_; |
| |
| my $res = ''; |
| my $n = 0; |
| for my $c (split(//, $str)) { |
| if ($c eq "\t") { |
| $res .= ' '; |
| $n++; |
| for (; ($n % 8) != 0; $n++) { |
| $res .= ' '; |
| } |
| next; |
| } |
| $res .= $c; |
| $n++; |
| } |
| |
| return $res; |
| } |
| sub copy_spacing { |
| (my $res = shift) =~ tr/\t/ /c; |
| return $res; |
| } |
| |
| sub line_stats { |
| my ($line) = @_; |
| |
| # Drop the diff line leader and expand tabs |
| $line =~ s/^.//; |
| $line = expand_tabs($line); |
| |
| # Pick the indent from the front of the line. |
| my ($white) = ($line =~ /^(\s*)/); |
| |
| return (length($line), length($white)); |
| } |
| |
| my $sanitise_quote = ''; |
| |
| sub sanitise_line_reset { |
| my ($in_comment) = @_; |
| |
| if ($in_comment) { |
| $sanitise_quote = '*/'; |
| } else { |
| $sanitise_quote = ''; |
| } |
| } |
| sub sanitise_line { |
| my ($line) = @_; |
| |
| my $res = ''; |
| my $l = ''; |
| |
| my $qlen = 0; |
| my $off = 0; |
| my $c; |
| |
| # Always copy over the diff marker. |
| $res = substr($line, 0, 1); |
| |
| for ($off = 1; $off < length($line); $off++) { |
| $c = substr($line, $off, 1); |
| |
| # Comments we are wacking completly including the begin |
| # and end, all to $;. |
| if ($sanitise_quote eq '' && substr($line, $off, 2) eq '/*') { |
| $sanitise_quote = '*/'; |
| |
| substr($res, $off, 2, "$;$;"); |
| $off++; |
| next; |
| } |
| if ($sanitise_quote eq '*/' && substr($line, $off, 2) eq '*/') { |
| $sanitise_quote = ''; |
| substr($res, $off, 2, "$;$;"); |
| $off++; |
| next; |
| } |
| if ($sanitise_quote eq '' && substr($line, $off, 2) eq '//') { |
| $sanitise_quote = '//'; |
| |
| substr($res, $off, 2, $sanitise_quote); |
| $off++; |
| next; |
| } |
| |
| # A \ in a string means ignore the next character. |
| if (($sanitise_quote eq "'" || $sanitise_quote eq '"') && |
| $c eq "\\") { |
| substr($res, $off, 2, 'XX'); |
| $off++; |
| next; |
| } |
| # Regular quotes. |
| if ($c eq "'" || $c eq '"') { |
| if ($sanitise_quote eq '') { |
| $sanitise_quote = $c; |
| |
| substr($res, $off, 1, $c); |
| next; |
| } elsif ($sanitise_quote eq $c) { |
| $sanitise_quote = ''; |
| } |
| } |
| |
| #print "c<$c> SQ<$sanitise_quote>\n"; |
| if ($off != 0 && $sanitise_quote eq '*/' && $c ne "\t") { |
| substr($res, $off, 1, $;); |
| } elsif ($off != 0 && $sanitise_quote eq '//' && $c ne "\t") { |
| substr($res, $off, 1, $;); |
| } elsif ($off != 0 && $sanitise_quote && $c ne "\t") { |
| substr($res, $off, 1, 'X'); |
| } else { |
| substr($res, $off, 1, $c); |
| } |
| } |
| |
| if ($sanitise_quote eq '//') { |
| $sanitise_quote = ''; |
| } |
| |
| # The pathname on a #include may be surrounded by '<' and '>'. |
| if ($res =~ /^.\s*\#\s*include\s+\<(.*)\>/) { |
| my $clean = 'X' x length($1); |
| $res =~ s@\<.*\>@<$clean>@; |
| |
| # The whole of a #error is a string. |
| } elsif ($res =~ /^.\s*\#\s*(?:error|warning)\s+(.*)\b/) { |
| my $clean = 'X' x length($1); |
| $res =~ s@(\#\s*(?:error|warning)\s+).*@$1$clean@; |
| } |
| |
| return $res; |
| } |
| |
| sub ctx_statement_block { |
| my ($linenr, $remain, $off) = @_; |
| my $line = $linenr - 1; |
| my $blk = ''; |
| my $soff = $off; |
| my $coff = $off - 1; |
| my $coff_set = 0; |
| |
| my $loff = 0; |
| |
| my $type = ''; |
| my $level = 0; |
| my @stack = (); |
| my $p; |
| my $c; |
| my $len = 0; |
| |
| my $remainder; |
| while (1) { |
| @stack = (['', 0]) if ($#stack == -1); |
| |
| #warn "CSB: blk<$blk> remain<$remain>\n"; |
| # If we are about to drop off the end, pull in more |
| # context. |
| if ($off >= $len) { |
| for (; $remain > 0; $line++) { |
| last if (!defined $lines[$line]); |
| next if ($lines[$line] =~ /^-/); |
| $remain--; |
| $loff = $len; |
| $blk .= $lines[$line] . "\n"; |
| $len = length($blk); |
| $line++; |
| last; |
| } |
| # Bail if there is no further context. |
| #warn "CSB: blk<$blk> off<$off> len<$len>\n"; |
| if ($off >= $len) { |
| last; |
| } |
| if ($level == 0 && substr($blk, $off) =~ /^.\s*#\s*define/) { |
| $level++; |
| $type = '#'; |
| } |
| } |
| $p = $c; |
| $c = substr($blk, $off, 1); |
| $remainder = substr($blk, $off); |
| |
| #warn "CSB: c<$c> type<$type> level<$level> remainder<$remainder> coff_set<$coff_set>\n"; |
| |
| # Handle nested #if/#else. |
| if ($remainder =~ /^#\s*(?:ifndef|ifdef|if)\s/) { |
| push(@stack, [ $type, $level ]); |
| } elsif ($remainder =~ /^#\s*(?:else|elif)\b/) { |
| ($type, $level) = @{$stack[$#stack - 1]}; |
| } elsif ($remainder =~ /^#\s*endif\b/) { |
| ($type, $level) = @{pop(@stack)}; |
| } |
| |
| # Statement ends at the ';' or a close '}' at the |
| # outermost level. |
| if ($level == 0 && $c eq ';') { |
| last; |
| } |
| |
| # An else is really a conditional as long as its not else if |
| if ($level == 0 && $coff_set == 0 && |
| (!defined($p) || $p =~ /(?:\s|\}|\+)/) && |
| $remainder =~ /^(else)(?:\s|{)/ && |
| $remainder !~ /^else\s+if\b/) { |
| $coff = $off + length($1) - 1; |
| $coff_set = 1; |
| #warn "CSB: mark coff<$coff> soff<$soff> 1<$1>\n"; |
| #warn "[" . substr($blk, $soff, $coff - $soff + 1) . "]\n"; |
| } |
| |
| if (($type eq '' || $type eq '(') && $c eq '(') { |
| $level++; |
| $type = '('; |
| } |
| if ($type eq '(' && $c eq ')') { |
| $level--; |
| $type = ($level != 0)? '(' : ''; |
| |
| if ($level == 0 && $coff < $soff) { |
| $coff = $off; |
| $coff_set = 1; |
| #warn "CSB: mark coff<$coff>\n"; |
| } |
| } |
| if (($type eq '' || $type eq '{') && $c eq '{') { |
| $level++; |
| $type = '{'; |
| } |
| if ($type eq '{' && $c eq '}') { |
| $level--; |
| $type = ($level != 0)? '{' : ''; |
| |
| if ($level == 0) { |
| if (substr($blk, $off + 1, 1) eq ';') { |
| $off++; |
| } |
| last; |
| } |
| } |
| # Preprocessor commands end at the newline unless escaped. |
| if ($type eq '#' && $c eq "\n" && $p ne "\\") { |
| $level--; |
| $type = ''; |
| $off++; |
| last; |
| } |
| $off++; |
| } |
| # We are truly at the end, so shuffle to the next line. |
| if ($off == $len) { |
| $loff = $len + 1; |
| $line++; |
| $remain--; |
| } |
| |
| my $statement = substr($blk, $soff, $off - $soff + 1); |
| my $condition = substr($blk, $soff, $coff - $soff + 1); |
| |
| #warn "STATEMENT<$statement>\n"; |
| #warn "CONDITION<$condition>\n"; |
| |
| #print "coff<$coff> soff<$off> loff<$loff>\n"; |
| |
| return ($statement, $condition, |
| $line, $remain + 1, $off - $loff + 1, $level); |
| } |
| |
| sub statement_lines { |
| my ($stmt) = @_; |
| |
| # Strip the diff line prefixes and rip blank lines at start and end. |
| $stmt =~ s/(^|\n)./$1/g; |
| $stmt =~ s/^\s*//; |
| $stmt =~ s/\s*$//; |
| |
| my @stmt_lines = ($stmt =~ /\n/g); |
| |
| return $#stmt_lines + 2; |
| } |
| |
| sub statement_rawlines { |
| my ($stmt) = @_; |
| |
| my @stmt_lines = ($stmt =~ /\n/g); |
| |
| return $#stmt_lines + 2; |
| } |
| |
| sub statement_block_size { |
| my ($stmt) = @_; |
| |
| $stmt =~ s/(^|\n)./$1/g; |
| $stmt =~ s/^\s*{//; |
| $stmt =~ s/}\s*$//; |
| $stmt =~ s/^\s*//; |
| $stmt =~ s/\s*$//; |
| |
| my @stmt_lines = ($stmt =~ /\n/g); |
| my @stmt_statements = ($stmt =~ /;/g); |
| |
| my $stmt_lines = $#stmt_lines + 2; |
| my $stmt_statements = $#stmt_statements + 1; |
| |
| if ($stmt_lines > $stmt_statements) { |
| return $stmt_lines; |
| } else { |
| return $stmt_statements; |
| } |
| } |
| |
| sub ctx_statement_full { |
| my ($linenr, $remain, $off) = @_; |
| my ($statement, $condition, $level); |
| |
| my (@chunks); |
| |
| # Grab the first conditional/block pair. |
| ($statement, $condition, $linenr, $remain, $off, $level) = |
| ctx_statement_block($linenr, $remain, $off); |
| #print "F: c<$condition> s<$statement> remain<$remain>\n"; |
| push(@chunks, [ $condition, $statement ]); |
| if (!($remain > 0 && $condition =~ /^\s*(?:\n[+-])?\s*(?:if|else|do)\b/s)) { |
| return ($level, $linenr, @chunks); |
| } |
| |
| # Pull in the following conditional/block pairs and see if they |
| # could continue the statement. |
| for (;;) { |
| ($statement, $condition, $linenr, $remain, $off, $level) = |
| ctx_statement_block($linenr, $remain, $off); |
| #print "C: c<$condition> s<$statement> remain<$remain>\n"; |
| last if (!($remain > 0 && $condition =~ /^(?:\s*\n[+-])*\s*(?:else|do)\b/s)); |
| #print "C: push\n"; |
| push(@chunks, [ $condition, $statement ]); |
| } |
| |
| return ($level, $linenr, @chunks); |
| } |
| |
| sub ctx_block_get { |
| my ($linenr, $remain, $outer, $open, $close, $off) = @_; |
| my $line; |
| my $start = $linenr - 1; |
| my $blk = ''; |
| my @o; |
| my @c; |
| my @res = (); |
| |
| my $level = 0; |
| my @stack = ($level); |
| for ($line = $start; $remain > 0; $line++) { |
| next if ($rawlines[$line] =~ /^-/); |
| $remain--; |
| |
| $blk .= $rawlines[$line]; |
| |
| # Handle nested #if/#else. |
| if ($lines[$line] =~ /^.\s*#\s*(?:ifndef|ifdef|if)\s/) { |
| push(@stack, $level); |
| } elsif ($lines[$line] =~ /^.\s*#\s*(?:else|elif)\b/) { |
| $level = $stack[$#stack - 1]; |
| } elsif ($lines[$line] =~ /^.\s*#\s*endif\b/) { |
| $level = pop(@stack); |
| } |
| |
| foreach my $c (split(//, $lines[$line])) { |
| ##print "C<$c>L<$level><$open$close>O<$off>\n"; |
| if ($off > 0) { |
| $off--; |
| next; |
| } |
| |
| if ($c eq $close && $level > 0) { |
| $level--; |
| last if ($level == 0); |
| } elsif ($c eq $open) { |
| $level++; |
| } |
| } |
| |
| if (!$outer || $level <= 1) { |
| push(@res, $rawlines[$line]); |
| } |
| |
| last if ($level == 0); |
| } |
| |
| return ($level, @res); |
| } |
| sub ctx_block_outer { |
| my ($linenr, $remain) = @_; |
| |
| my ($level, @r) = ctx_block_get($linenr, $remain, 1, '{', '}', 0); |
| return @r; |
| } |
| sub ctx_block { |
| my ($linenr, $remain) = @_; |
| |
| my ($level, @r) = ctx_block_get($linenr, $remain, 0, '{', '}', 0); |
| return @r; |
| } |
| sub ctx_statement { |
| my ($linenr, $remain, $off) = @_; |
| |
| my ($level, @r) = ctx_block_get($linenr, $remain, 0, '(', ')', $off); |
| return @r; |
| } |
| sub ctx_block_level { |
| my ($linenr, $remain) = @_; |
| |
| return ctx_block_get($linenr, $remain, 0, '{', '}', 0); |
| } |
| sub ctx_statement_level { |
| my ($linenr, $remain, $off) = @_; |
| |
| return ctx_block_get($linenr, $remain, 0, '(', ')', $off); |
| } |
| |
| sub ctx_locate_comment { |
| my ($first_line, $end_line) = @_; |
| |
| # Catch a comment on the end of the line itself. |
| my ($current_comment) = ($rawlines[$end_line - 1] =~ m@.*(/\*.*\*/)\s*(?:\\\s*)?$@); |
| return $current_comment if (defined $current_comment); |
| |
| # Look through the context and try and figure out if there is a |
| # comment. |
| my $in_comment = 0; |
| $current_comment = ''; |
| for (my $linenr = $first_line; $linenr < $end_line; $linenr++) { |
| my $line = $rawlines[$linenr - 1]; |
| #warn " $line\n"; |
| if ($linenr == $first_line and $line =~ m@^.\s*\*@) { |
| $in_comment = 1; |
| } |
| if ($line =~ m@/\*@) { |
| $in_comment = 1; |
| } |
| if (!$in_comment && $current_comment ne '') { |
| $current_comment = ''; |
| } |
| $current_comment .= $line . "\n" if ($in_comment); |
| if ($line =~ m@\*/@) { |
| $in_comment = 0; |
| } |
| } |
| |
| chomp($current_comment); |
| return($current_comment); |
| } |
| sub ctx_has_comment { |
| my ($first_line, $end_line) = @_; |
| my $cmt = ctx_locate_comment($first_line, $end_line); |
| |
| ##print "LINE: $rawlines[$end_line - 1 ]\n"; |
| ##print "CMMT: $cmt\n"; |
| |
| return ($cmt ne ''); |
| } |
| |
| sub raw_line { |
| my ($linenr, $cnt) = @_; |
| |
| my $offset = $linenr - 1; |
| $cnt++; |
| |
| my $line; |
| while ($cnt) { |
| $line = $rawlines[$offset++]; |
| next if (defined($line) && $line =~ /^-/); |
| $cnt--; |
| } |
| |
| return $line; |
| } |
| |
| sub cat_vet { |
| my ($vet) = @_; |
| my ($res, $coded); |
| |
| $res = ''; |
| while ($vet =~ /([^[:cntrl:]]*)([[:cntrl:]]|$)/g) { |
| $res .= $1; |
| if ($2 ne '') { |
| $coded = sprintf("^%c", unpack('C', $2) + 64); |
| $res .= $coded; |
| } |
| } |
| $res =~ s/$/\$/; |
| |
| return $res; |
| } |
| |
| my $av_preprocessor = 0; |
| my $av_pending; |
| my @av_paren_type; |
| my $av_pend_colon; |
| |
| sub annotate_reset { |
| $av_preprocessor = 0; |
| $av_pending = '_'; |
| @av_paren_type = ('E'); |
| $av_pend_colon = 'O'; |
| } |
| |
| sub annotate_values { |
| my ($stream, $type) = @_; |
| |
| my $res; |
| my $var = '_' x length($stream); |
| my $cur = $stream; |
| |
| print "$stream\n" if ($dbg_values > 1); |
| |
| while (length($cur)) { |
| @av_paren_type = ('E') if ($#av_paren_type < 0); |
| print " <" . join('', @av_paren_type) . |
| "> <$type> <$av_pending>" if ($dbg_values > 1); |
| if ($cur =~ /^(\s+)/o) { |
| print "WS($1)\n" if ($dbg_values > 1); |
| if ($1 =~ /\n/ && $av_preprocessor) { |
| $type = pop(@av_paren_type); |
| $av_preprocessor = 0; |
| } |
| |
| } elsif ($cur =~ /^(\(\s*$Type\s*)\)/ && $av_pending eq '_') { |
| print "CAST($1)\n" if ($dbg_values > 1); |
| push(@av_paren_type, $type); |
| $type = 'c'; |
| |
| } elsif ($cur =~ /^($Type)\s*(?:$Ident|,|\)|\(|\s*$)/) { |
| print "DECLARE($1)\n" if ($dbg_values > 1); |
| $type = 'T'; |
| |
| } elsif ($cur =~ /^($Modifier)\s*/) { |
| print "MODIFIER($1)\n" if ($dbg_values > 1); |
| $type = 'T'; |
| |
| } elsif ($cur =~ /^(\#\s*define\s*$Ident)(\(?)/o) { |
| print "DEFINE($1,$2)\n" if ($dbg_values > 1); |
| $av_preprocessor = 1; |
| push(@av_paren_type, $type); |
| if ($2 ne '') { |
| $av_pending = 'N'; |
| } |
| $type = 'E'; |
| |
| } elsif ($cur =~ /^(\#\s*(?:undef\s*$Ident|include\b))/o) { |
| print "UNDEF($1)\n" if ($dbg_values > 1); |
| $av_preprocessor = 1; |
| push(@av_paren_type, $type); |
| |
| } elsif ($cur =~ /^(\#\s*(?:ifdef|ifndef|if))/o) { |
| print "PRE_START($1)\n" if ($dbg_values > 1); |
| $av_preprocessor = 1; |
| |
| push(@av_paren_type, $type); |
| push(@av_paren_type, $type); |
| $type = 'E'; |
| |
| } elsif ($cur =~ /^(\#\s*(?:else|elif))/o) { |
| print "PRE_RESTART($1)\n" if ($dbg_values > 1); |
| $av_preprocessor = 1; |
| |
| push(@av_paren_type, $av_paren_type[$#av_paren_type]); |
| |
| $type = 'E'; |
| |
| } elsif ($cur =~ /^(\#\s*(?:endif))/o) { |
| print "PRE_END($1)\n" if ($dbg_values > 1); |
| |
| $av_preprocessor = 1; |
| |
| # Assume all arms of the conditional end as this |
| # one does, and continue as if the #endif was not here. |
| pop(@av_paren_type); |
| push(@av_paren_type, $type); |
| $type = 'E'; |
| |
| } elsif ($cur =~ /^(\\\n)/o) { |
| print "PRECONT($1)\n" if ($dbg_values > 1); |
| |
| } elsif ($cur =~ /^(__attribute__)\s*\(?/o) { |
| print "ATTR($1)\n" if ($dbg_values > 1); |
| $av_pending = $type; |
| $type = 'N'; |
| |
| } elsif ($cur =~ /^(sizeof)\s*(\()?/o) { |
| print "SIZEOF($1)\n" if ($dbg_values > 1); |
| if (defined $2) { |
| $av_pending = 'V'; |
| } |
| $type = 'N'; |
| |
| } elsif ($cur =~ /^(if|while|for)\b/o) { |
| print "COND($1)\n" if ($dbg_values > 1); |
| $av_pending = 'E'; |
| $type = 'N'; |
| |
| } elsif ($cur =~/^(case)/o) { |
| print "CASE($1)\n" if ($dbg_values > 1); |
| $av_pend_colon = 'C'; |
| $type = 'N'; |
| |
| } elsif ($cur =~/^(return|else|goto|typeof|__typeof__)\b/o) { |
| print "KEYWORD($1)\n" if ($dbg_values > 1); |
| $type = 'N'; |
| |
| } elsif ($cur =~ /^(\()/o) { |
| print "PAREN('$1')\n" if ($dbg_values > 1); |
| push(@av_paren_type, $av_pending); |
| $av_pending = '_'; |
| $type = 'N'; |
| |
| } elsif ($cur =~ /^(\))/o) { |
| my $new_type = pop(@av_paren_type); |
| if ($new_type ne '_') { |
| $type = $new_type; |
| print "PAREN('$1') -> $type\n" |
| if ($dbg_values > 1); |
| } else { |
| print "PAREN('$1')\n" if ($dbg_values > 1); |
| } |
| |
| } elsif ($cur =~ /^($Ident)\s*\(/o) { |
| print "FUNC($1)\n" if ($dbg_values > 1); |
| $type = 'V'; |
| $av_pending = 'V'; |
| |
| } elsif ($cur =~ /^($Ident\s*):(?:\s*\d+\s*(,|=|;))?/) { |
| if (defined $2 && $type eq 'C' || $type eq 'T') { |
| $av_pend_colon = 'B'; |
| } elsif ($type eq 'E') { |
| $av_pend_colon = 'L'; |
| } |
| print "IDENT_COLON($1,$type>$av_pend_colon)\n" if ($dbg_values > 1); |
| $type = 'V'; |
| |
| } elsif ($cur =~ /^($Ident|$Constant)/o) { |
| print "IDENT($1)\n" if ($dbg_values > 1); |
| $type = 'V'; |
| |
| } elsif ($cur =~ /^($Assignment)/o) { |
| print "ASSIGN($1)\n" if ($dbg_values > 1); |
| $type = 'N'; |
| |
| } elsif ($cur =~/^(;|{|})/) { |
| print "END($1)\n" if ($dbg_values > 1); |
| $type = 'E'; |
| $av_pend_colon = 'O'; |
| |
| } elsif ($cur =~/^(,)/) { |
| print "COMMA($1)\n" if ($dbg_values > 1); |
| $type = 'C'; |
| |
| } elsif ($cur =~ /^(\?)/o) { |
| print "QUESTION($1)\n" if ($dbg_values > 1); |
| $type = 'N'; |
| |
| } elsif ($cur =~ /^(:)/o) { |
| print "COLON($1,$av_pend_colon)\n" if ($dbg_values > 1); |
| |
| substr($var, length($res), 1, $av_pend_colon); |
| if ($av_pend_colon eq 'C' || $av_pend_colon eq 'L') { |
| $type = 'E'; |
| } else { |
| $type = 'N'; |
| } |
| $av_pend_colon = 'O'; |
| |
| } elsif ($cur =~ /^(\[)/o) { |
| print "CLOSE($1)\n" if ($dbg_values > 1); |
| $type = 'N'; |
| |
| } elsif ($cur =~ /^(-(?![->])|\+(?!\+)|\*|\&\&|\&)/o) { |
| my $variant; |
| |
| print "OPV($1)\n" if ($dbg_values > 1); |
| if ($type eq 'V') { |
| $variant = 'B'; |
| } else { |
| $variant = 'U'; |
| } |
| |
| substr($var, length($res), 1, $variant); |
| $type = 'N'; |
| |
| } elsif ($cur =~ /^($Operators)/o) { |
| print "OP($1)\n" if ($dbg_values > 1); |
| if ($1 ne '++' && $1 ne '--') { |
| $type = 'N'; |
| } |
| |
| } elsif ($cur =~ /(^.)/o) { |
| print "C($1)\n" if ($dbg_values > 1); |
| } |
| if (defined $1) { |
| $cur = substr($cur, length($1)); |
| $res .= $type x length($1); |
| } |
| } |
| |
| return ($res, $var); |
| } |
| |
| sub possible { |
| my ($possible, $line) = @_; |
| my $notPermitted = qr{(?: |
| ^(?: |
| $Modifier| |
| $Storage| |
| $Type| |
| DEFINE_\S+ |
| )$| |
| ^(?: |
| goto| |
| return| |
| case| |
| else| |
| asm|__asm__| |
| do| |
| \#| |
| \#\#| |
| )(?:\s|$)| |
| ^(?:typedef|struct|enum)\b |
| )}x; |
| warn "CHECK<$possible> ($line)\n" if ($dbg_possible > 2); |
| if ($possible !~ $notPermitted) { |
| # Check for modifiers. |
| $possible =~ s/\s*$Storage\s*//g; |
| $possible =~ s/\s*$Sparse\s*//g; |
| if ($possible =~ /^\s*$/) { |
| |
| } elsif ($possible =~ /\s/) { |
| $possible =~ s/\s*$Type\s*//g; |
| for my $modifier (split(' ', $possible)) { |
| if ($modifier !~ $notPermitted) { |
| warn "MODIFIER: $modifier ($possible) ($line)\n" if ($dbg_possible); |
| push(@modifierList, $modifier); |
| } |
| } |
| |
| } else { |
| warn "POSSIBLE: $possible ($line)\n" if ($dbg_possible); |
| push(@typeList, $possible); |
| } |
| build_types(); |
| } else { |
| warn "NOTPOSS: $possible ($line)\n" if ($dbg_possible > 1); |
| } |
| } |
| |
| my $prefix = ''; |
| |
| sub show_type { |
| return !defined $ignore_type{$_[0]}; |
| } |
| |
| sub report { |
| if (!show_type($_[1]) || |
| (defined $tst_only && $_[2] !~ /\Q$tst_only\E/)) { |
| return 0; |
| } |
| my $line; |
| if ($show_types) { |
| $line = "$prefix$_[0]:$_[1]: $_[2]\n"; |
| } else { |
| $line = "$prefix$_[0]: $_[2]\n"; |
| } |
| $line = (split('\n', $line))[0] . "\n" if ($terse); |
| |
| push(our @report, $line); |
| |
| return 1; |
| } |
| sub report_dump { |
| our @report; |
| } |
| |
| sub ERROR { |
| if (report("ERROR", $_[0], $_[1])) { |
| our $clean = 0; |
| our $cnt_error++; |
| } |
| } |
| sub WARN { |
| if (report("WARNING", $_[0], $_[1])) { |
| our $clean = 0; |
| our $cnt_warn++; |
| } |
| } |
| sub CHK { |
| if ($check && report("CHECK", $_[0], $_[1])) { |
| our $clean = 0; |
| our $cnt_chk++; |
| } |
| } |
| |
| sub check_absolute_file { |
| my ($absolute, $herecurr) = @_; |
| my $file = $absolute; |
| |
| ##print "absolute<$absolute>\n"; |
| |
| # See if any suffix of this path is a path within the tree. |
| while ($file =~ s@^[^/]*/@@) { |
| if (-f "$root/$file") { |
| ##print "file<$file>\n"; |
| last; |
| } |
| } |
| if (! -f _) { |
| return 0; |
| } |
| |
| # It is, so see if the prefix is acceptable. |
| my $prefix = $absolute; |
| substr($prefix, -length($file)) = ''; |
| |
| ##print "prefix<$prefix>\n"; |
| if ($prefix ne ".../") { |
| WARN("USE_RELATIVE_PATH", |
| "use relative pathname instead of absolute in changelog text\n" . $herecurr); |
| } |
| } |
| |
| sub pos_last_openparen { |
| my ($line) = @_; |
| |
| my $pos = 0; |
| |
| my $opens = $line =~ tr/\(/\(/; |
| my $closes = $line =~ tr/\)/\)/; |
| |
| my $last_openparen = 0; |
| |
| if (($opens == 0) || ($closes >= $opens)) { |
| return -1; |
| } |
| |
| my $len = length($line); |
| |
| for ($pos = 0; $pos < $len; $pos++) { |
| my $string = substr($line, $pos); |
| if ($string =~ /^($FuncArg|$balanced_parens)/) { |
| $pos += length($1) - 1; |
| } elsif (substr($line, $pos, 1) eq '(') { |
| $last_openparen = $pos; |
| } elsif (index($string, '(') == -1) { |
| last; |
| } |
| } |
| |
| return $last_openparen + 1; |
| } |
| |
| sub process { |
| my $filename = shift; |
| |
| my $linenr=0; |
| my $prevline=""; |
| my $prevrawline=""; |
| my $stashline=""; |
| my $stashrawline=""; |
| |
| my $length; |
| my $indent; |
| my $previndent=0; |
| my $stashindent=0; |
| |
| our $clean = 1; |
| my $signoff = 0; |
| my $is_patch = 0; |
| |
| my $in_header_lines = 1; |
| my $in_commit_log = 0; #Scanning lines before patch |
| |
| my $non_utf8_charset = 0; |
| |
| our @report = (); |
| our $cnt_lines = 0; |
| our $cnt_error = 0; |
| our $cnt_warn = 0; |
| our $cnt_chk = 0; |
| |
| # Trace the real file/line as we go. |
| my $realfile = ''; |
| my $realline = 0; |
| my $realcnt = 0; |
| my $here = ''; |
| my $in_comment = 0; |
| my $comment_edge = 0; |
| my $first_line = 0; |
| my $p1_prefix = ''; |
| |
| my $prev_values = 'E'; |
| |
| # suppression flags |
| my %suppress_ifbraces; |
| my %suppress_whiletrailers; |
| my %suppress_export; |
| my $suppress_statement = 0; |
| |
| my %camelcase = (); |
| |
| # Pre-scan the patch sanitizing the lines. |
| # Pre-scan the patch looking for any __setup documentation. |
| # |
| my @setup_docs = (); |
| my $setup_docs = 0; |
| |
| sanitise_line_reset(); |
| my $line; |
| foreach my $rawline (@rawlines) { |
| $linenr++; |
| $line = $rawline; |
| |
| if ($rawline=~/^\+\+\+\s+(\S+)/) { |
| $setup_docs = 0; |
| if ($1 =~ m@Documentation/kernel-parameters.txt$@) { |
| $setup_docs = 1; |
| } |
| #next; |
| } |
| if ($rawline=~/^\@\@ -\d+(?:,\d+)? \+(\d+)(,(\d+))? \@\@/) { |
| $realline=$1-1; |
| if (defined $2) { |
| $realcnt=$3+1; |
| } else { |
| $realcnt=1+1; |
| } |
| $in_comment = 0; |
| |
| # Guestimate if this is a continuing comment. Run |
| # the context looking for a comment "edge". If this |
| # edge is a close comment then we must be in a comment |
| # at context start. |
| my $edge; |
| my $cnt = $realcnt; |
| for (my $ln = $linenr + 1; $cnt > 0; $ln++) { |
| next if (defined $rawlines[$ln - 1] && |
| $rawlines[$ln - 1] =~ /^-/); |
| $cnt--; |
| #print "RAW<$rawlines[$ln - 1]>\n"; |
| last if (!defined $rawlines[$ln - 1]); |
| if ($rawlines[$ln - 1] =~ m@(/\*|\*/)@ && |
| $rawlines[$ln - 1] !~ m@"[^"]*(?:/\*|\*/)[^"]*"@) { |
| ($edge) = $1; |
| last; |
| } |
| } |
| if (defined $edge && $edge eq '*/') { |
| $in_comment = 1; |
| } |
| |
| # Guestimate if this is a continuing comment. If this |
| # is the start of a diff block and this line starts |
| # ' *' then it is very likely a comment. |
| if (!defined $edge && |
| $rawlines[$linenr] =~ m@^.\s*(?:\*\*+| \*)(?:\s|$)@) |
| { |
| $in_comment = 1; |
| } |
| |
| ##print "COMMENT:$in_comment edge<$edge> $rawline\n"; |
| sanitise_line_reset($in_comment); |
| |
| } elsif ($realcnt && $rawline =~ /^(?:\+| |$)/) { |
| # Standardise the strings and chars within the input to |
| # simplify matching -- only bother with positive lines. |
| $line = sanitise_line($rawline); |
| } |
| push(@lines, $line); |
| |
| if ($realcnt > 1) { |
| $realcnt-- if ($line =~ /^(?:\+| |$)/); |
| } else { |
| $realcnt = 0; |
| } |
| |
| #print "==>$rawline\n"; |
| #print "-->$line\n"; |
| |
| if ($setup_docs && $line =~ /^\+/) { |
| push(@setup_docs, $line); |
| } |
| } |
| |
| $prefix = ''; |
| |
| $realcnt = 0; |
| $linenr = 0; |
| foreach my $line (@lines) { |
| $linenr++; |
| |
| my $rawline = $rawlines[$linenr - 1]; |
| |
| #extract the line range in the file after the patch is applied |
| if ($line=~/^\@\@ -\d+(?:,\d+)? \+(\d+)(,(\d+))? \@\@/) { |
| $is_patch = 1; |
| $first_line = $linenr + 1; |
| $realline=$1-1; |
| if (defined $2) { |
| $realcnt=$3+1; |
| } else { |
| $realcnt=1+1; |
| } |
| annotate_reset(); |
| $prev_values = 'E'; |
| |
| %suppress_ifbraces = (); |
| %suppress_whiletrailers = (); |
| %suppress_export = (); |
| $suppress_statement = 0; |
| next; |
| |
| # track the line number as we move through the hunk, note that |
| # new versions of GNU diff omit the leading space on completely |
| # blank context lines so we need to count that too. |
| } elsif ($line =~ /^( |\+|$)/) { |
| $realline++; |
| $realcnt-- if ($realcnt != 0); |
| |
| # Measure the line length and indent. |
| ($length, $indent) = line_stats($rawline); |
| |
| # Track the previous line. |
| ($prevline, $stashline) = ($stashline, $line); |
| ($previndent, $stashindent) = ($stashindent, $indent); |
| ($prevrawline, $stashrawline) = ($stashrawline, $rawline); |
| |
| #warn "line<$line>\n"; |
| |
| } elsif ($realcnt == 1) { |
| $realcnt--; |
| } |
| |
| my $hunk_line = ($realcnt != 0); |
| |
| #make up the handle for any error we report on this line |
| $prefix = "$filename:$realline: " if ($emacs && $file); |
| $prefix = "$filename:$linenr: " if ($emacs && !$file); |
| |
| $here = "#$linenr: " if (!$file); |
| $here = "#$realline: " if ($file); |
| |
| # extract the filename as it passes |
| if ($line =~ /^diff --git.*?(\S+)$/) { |
| $realfile = $1; |
| $realfile =~ s@^([^/]*)/@@; |
| $in_commit_log = 0; |
| } elsif ($line =~ /^\+\+\+\s+(\S+)/) { |
| $realfile = $1; |
| $realfile =~ s@^([^/]*)/@@; |
| $in_commit_log = 0; |
| |
| $p1_prefix = $1; |
| if (!$file && $tree && $p1_prefix ne '' && |
| -e "$root/$p1_prefix") { |
| WARN("PATCH_PREFIX", |
| "patch prefix '$p1_prefix' exists, appears to be a -p0 patch\n"); |
| } |
| |
| if ($realfile =~ m@^include/asm/@) { |
| ERROR("MODIFIED_INCLUDE_ASM", |
| "do not modify files in include/asm, change architecture specific files in include/asm-<architecture>\n" . "$here$rawline\n"); |
| } |
| next; |
| } |
| |
| $here .= "FILE: $realfile:$realline:" if ($realcnt != 0); |
| |
| my $hereline = "$here\n$rawline\n"; |
| my $herecurr = "$here\n$rawline\n"; |
| my $hereprev = "$here\n$prevrawline\n$rawline\n"; |
| |
| $cnt_lines++ if ($realcnt != 0); |
| |
| # Check for incorrect file permissions |
| if ($line =~ /^new (file )?mode.*[7531]\d{0,2}$/) { |
| my $permhere = $here . "FILE: $realfile\n"; |
| if ($realfile =~ /(Makefile|Kconfig|\.c|\.h|\.S|\.tmpl)$/) { |
| ERROR("EXECUTE_PERMISSIONS", |
| "do not set execute permissions for source files\n" . $permhere); |
| } |
| } |
| |
| # Check the patch for a signoff: |
| if ($line =~ /^\s*signed-off-by:/i) { |
| $signoff++; |
| $in_commit_log = 0; |
| } |
| |
| # Check signature styles |
| if (!$in_header_lines && |
| $line =~ /^(\s*)([a-z0-9_-]+by:|$signature_tags)(\s*)(.*)/i) { |
| my $space_before = $1; |
| my $sign_off = $2; |
| my $space_after = $3; |
| my $email = $4; |
| my $ucfirst_sign_off = ucfirst(lc($sign_off)); |
| |
| if ($sign_off !~ /$signature_tags/) { |
| WARN("BAD_SIGN_OFF", |
| "Non-standard signature: $sign_off\n" . $herecurr); |
| } |
| if (defined $space_before && $space_before ne "") { |
| WARN("BAD_SIGN_OFF", |
| "Do not use whitespace before $ucfirst_sign_off\n" . $herecurr); |
| } |
| if ($sign_off =~ /-by:$/i && $sign_off ne $ucfirst_sign_off) { |
| WARN("BAD_SIGN_OFF", |
| "'$ucfirst_sign_off' is the preferred signature form\n" . $herecurr); |
| } |
| if (!defined $space_after || $space_after ne " ") { |
| WARN("BAD_SIGN_OFF", |
| "Use a single space after $ucfirst_sign_off\n" . $herecurr); |
| } |
| |
| my ($email_name, $email_address, $comment) = parse_email($email); |
| my $suggested_email = format_email(($email_name, $email_address)); |
| if ($suggested_email eq "") { |
| ERROR("BAD_SIGN_OFF", |
| "Unrecognized email address: '$email'\n" . $herecurr); |
| } else { |
| my $dequoted = $suggested_email; |
| $dequoted =~ s/^"//; |
| $dequoted =~ s/" </ </; |
| # Don't force email to have quotes |
| # Allow just an angle bracketed address |
| if ("$dequoted$comment" ne $email && |
| "<$email_address>$comment" ne $email && |
| "$suggested_email$comment" ne $email) { |
| WARN("BAD_SIGN_OFF", |
| "email address '$email' might be better as '$suggested_email$comment'\n" . $herecurr); |
| } |
| } |
| } |
| |
| # Check for wrappage within a valid hunk of the file |
| if ($realcnt != 0 && $line !~ m{^(?:\+|-| |\\ No newline|$)}) { |
| ERROR("CORRUPTED_PATCH", |
| "patch seems to be corrupt (line wrapped?)\n" . |
| $herecurr) if (!$emitted_corrupt++); |
| } |
| |
| # Check for absolute kernel paths. |
| if ($tree) { |
| while ($line =~ m{(?:^|\s)(/\S*)}g) { |
| my $file = $1; |
| |
| if ($file =~ m{^(.*?)(?::\d+)+:?$} && |
| check_absolute_file($1, $herecurr)) { |
| # |
| } else { |
| check_absolute_file($file, $herecurr); |
| } |
| } |
| } |
| |
| # UTF-8 regex found at http://www.w3.org/International/questions/qa-forms-utf-8.en.php |
| if (($realfile =~ /^$/ || $line =~ /^\+/) && |
| $rawline !~ m/^$UTF8*$/) { |
| my ($utf8_prefix) = ($rawline =~ /^($UTF8*)/); |
| |
| my $blank = copy_spacing($rawline); |
| my $ptr = substr($blank, 0, length($utf8_prefix)) . "^"; |
| my $hereptr = "$hereline$ptr\n"; |
| |
| CHK("INVALID_UTF8", |
| "Invalid UTF-8, patch and commit message should be encoded in UTF-8\n" . $hereptr); |
| } |
| |
| # Check if it's the start of a commit log |
| # (not a header line and we haven't seen the patch filename) |
| if ($in_header_lines && $realfile =~ /^$/ && |
| $rawline !~ /^(commit\b|from\b|[\w-]+:).+$/i) { |
| $in_header_lines = 0; |
| $in_commit_log = 1; |
| } |
| |
| # Check if there is UTF-8 in a commit log when a mail header has explicitly |
| # declined it, i.e defined some charset where it is missing. |
| if ($in_header_lines && |
| $rawline =~ /^Content-Type:.+charset="(.+)".*$/ && |
| $1 !~ /utf-8/i) { |
| $non_utf8_charset = 1; |
| } |
| |
| if ($in_commit_log && $non_utf8_charset && $realfile =~ /^$/ && |
| $rawline =~ /$NON_ASCII_UTF8/) { |
| WARN("UTF8_BEFORE_PATCH", |
| "8-bit UTF-8 used in possible commit log\n" . $herecurr); |
| } |
| |
| # ignore non-hunk lines and lines being removed |
| next if (!$hunk_line || $line =~ /^-/); |
| |
| #trailing whitespace |
| if ($line =~ /^\+.*\015/) { |
| my $herevet = "$here\n" . cat_vet($rawline) . "\n"; |
| ERROR("DOS_LINE_ENDINGS", |
| "DOS line endings\n" . $herevet); |
| |
| } elsif ($rawline =~ /^\+.*\S\s+$/ || $rawline =~ /^\+\s+$/) { |
| my $herevet = "$here\n" . cat_vet($rawline) . "\n"; |
| ERROR("TRAILING_WHITESPACE", |
| "trailing whitespace\n" . $herevet); |
| $rpt_cleaners = 1; |
| } |
| |
| # check for Kconfig help text having a real description |
| # Only applies when adding the entry originally, after that we do not have |
| # sufficient context to determine whether it is indeed long enough. |
| if ($realfile =~ /Kconfig/ && |
| $line =~ /.\s*config\s+/) { |
| my $length = 0; |
| my $cnt = $realcnt; |
| my $ln = $linenr + 1; |
| my $f; |
| my $is_start = 0; |
| my $is_end = 0; |
| for (; $cnt > 0 && defined $lines[$ln - 1]; $ln++) { |
| $f = $lines[$ln - 1]; |
| $cnt-- if ($lines[$ln - 1] !~ /^-/); |
| $is_end = $lines[$ln - 1] =~ /^\+/; |
| |
| next if ($f =~ /^-/); |
| |
| if ($lines[$ln - 1] =~ /.\s*(?:bool|tristate)\s*\"/) { |
| $is_start = 1; |
| } elsif ($lines[$ln - 1] =~ /.\s*(?:---)?help(?:---)?$/) { |
| $length = -1; |
| } |
| |
| $f =~ s/^.//; |
| $f =~ s/#.*//; |
| $f =~ s/^\s+//; |
| next if ($f =~ /^$/); |
| if ($f =~ /^\s*config\s/) { |
| $is_end = 1; |
| last; |
| } |
| $length++; |
| } |
| WARN("CONFIG_DESCRIPTION", |
| "please write a paragraph that describes the config symbol fully\n" . $herecurr) if ($is_start && $is_end && $length < 4); |
| #print "is_start<$is_start> is_end<$is_end> length<$length>\n"; |
| } |
| |
| # discourage the addition of CONFIG_EXPERIMENTAL in Kconfig. |
| if ($realfile =~ /Kconfig/ && |
| $line =~ /.\s*depends on\s+.*\bEXPERIMENTAL\b/) { |
| WARN("CONFIG_EXPERIMENTAL", |
| "Use of CONFIG_EXPERIMENTAL is deprecated. For alternatives, see https://lkml.org/lkml/2012/10/23/580\n"); |
| } |
| |
| if (($realfile =~ /Makefile.*/ || $realfile =~ /Kbuild.*/) && |
| ($line =~ /\+(EXTRA_[A-Z]+FLAGS).*/)) { |
| my $flag = $1; |
| my $replacement = { |
| 'EXTRA_AFLAGS' => 'asflags-y', |
| 'EXTRA_CFLAGS' => 'ccflags-y', |
| 'EXTRA_CPPFLAGS' => 'cppflags-y', |
| 'EXTRA_LDFLAGS' => 'ldflags-y', |
| }; |
| |
| WARN("DEPRECATED_VARIABLE", |
| "Use of $flag is deprecated, please use \`$replacement->{$flag} instead.\n" . $herecurr) if ($replacement->{$flag}); |
| } |
| |
| # check we are in a valid source file if not then ignore this hunk |
| next if ($realfile !~ /\.(h|c|s|S|pl|sh)$/); |
| |
| #line length limit |
| if ($line =~ /^\+/ && $prevrawline !~ /\/\*\*/ && |
| $rawline !~ /^.\s*\*\s*\@$Ident\s/ && |
| !($line =~ /^\+\s*$logFunctions\s*\(\s*(?:(KERN_\S+\s*|[^"]*))?"[X\t]*"\s*(?:|,|\)\s*;)\s*$/ || |
| $line =~ /^\+\s*"[^"]*"\s*(?:\s*|,|\)\s*;)\s*$/) && |
| $length > $max_line_length) |
| { |
| WARN("LONG_LINE", |
| "line over $max_line_length characters\n" . $herecurr); |
| } |
| |
| # Check for user-visible strings broken across lines, which breaks the ability |
| # to grep for the string. Limited to strings used as parameters (those |
| # following an open parenthesis), which almost completely eliminates false |
| # positives, as well as warning only once per parameter rather than once per |
| # line of the string. Make an exception when the previous string ends in a |
| # newline (multiple lines in one string constant) or \n\t (common in inline |
| # assembly to indent the instruction on the following line). |
| if ($line =~ /^\+\s*"/ && |
| $prevline =~ /"\s*$/ && |
| $prevline =~ /\(/ && |
| $prevrawline !~ /\\n(?:\\t)*"\s*$/) { |
| WARN("SPLIT_STRING", |
| "quoted string split across lines\n" . $hereprev); |
| } |
| |
| # check for spaces before a quoted newline |
| if ($rawline =~ /^.*\".*\s\\n/) { |
| WARN("QUOTED_WHITESPACE_BEFORE_NEWLINE", |
| "unnecessary whitespace before a quoted newline\n" . $herecurr); |
| } |
| |
| # check for adding lines without a newline. |
| if ($line =~ /^\+/ && defined $lines[$linenr] && $lines[$linenr] =~ /^\\ No newline at end of file/) { |
| WARN("MISSING_EOF_NEWLINE", |
| "adding a line without newline at end of file\n" . $herecurr); |
| } |
| |
| # Blackfin: use hi/lo macros |
| if ($realfile =~ m@arch/blackfin/.*\.S$@) { |
| if ($line =~ /\.[lL][[:space:]]*=.*&[[:space:]]*0x[fF][fF][fF][fF]/) { |
| my $herevet = "$here\n" . cat_vet($line) . "\n"; |
| ERROR("LO_MACRO", |
| "use the LO() macro, not (... & 0xFFFF)\n" . $herevet); |
| } |
| if ($line =~ /\.[hH][[:space:]]*=.*>>[[:space:]]*16/) { |
| my $herevet = "$here\n" . cat_vet($line) . "\n"; |
| ERROR("HI_MACRO", |
| "use the HI() macro, not (... >> 16)\n" . $herevet); |
| } |
| } |
| |
| # check we are in a valid source file C or perl if not then ignore this hunk |
| next if ($realfile !~ /\.(h|c|pl)$/); |
| |
| # at the beginning of a line any tabs must come first and anything |
| # more than 8 must use tabs. |
| if ($rawline =~ /^\+\s* \t\s*\S/ || |
| $rawline =~ /^\+\s* \s*/) { |
| my $herevet = "$here\n" . cat_vet($rawline) . "\n"; |
| ERROR("CODE_INDENT", |
| "code indent should use tabs where possible\n" . $herevet); |
| $rpt_cleaners = 1; |
| } |
| |
| # check for space before tabs. |
| if ($rawline =~ /^\+/ && $rawline =~ / \t/) { |
| my $herevet = "$here\n" . cat_vet($rawline) . "\n"; |
| WARN("SPACE_BEFORE_TAB", |
| "please, no space before tabs\n" . $herevet); |
| } |
| |
| # check for && or || at the start of a line |
| if ($rawline =~ /^\+\s*(&&|\|\|)/) { |
| CHK("LOGICAL_CONTINUATIONS", |
| "Logical continuations should be on the previous line\n" . $hereprev); |
| } |
| |
| # check multi-line statement indentation matches previous line |
| if ($^V && $^V ge 5.10.0 && |
| $prevline =~ /^\+(\t*)(if \(|$Ident\().*(\&\&|\|\||,)\s*$/) { |
| $prevline =~ /^\+(\t*)(.*)$/; |
| my $oldindent = $1; |
| my $rest = $2; |
| |
| my $pos = pos_last_openparen($rest); |
| if ($pos >= 0) { |
| $line =~ /^(\+| )([ \t]*)/; |
| my $newindent = $2; |
| |
| my $goodtabindent = $oldindent . |
| "\t" x ($pos / 8) . |
| " " x ($pos % 8); |
| my $goodspaceindent = $oldindent . " " x $pos; |
| |
| if ($newindent ne $goodtabindent && |
| $newindent ne $goodspaceindent) { |
| CHK("PARENTHESIS_ALIGNMENT", |
| "Alignment should match open parenthesis\n" . $hereprev); |
| } |
| } |
| } |
| |
| if ($line =~ /^\+.*\*[ \t]*\)[ \t]+/) { |
| CHK("SPACING", |
| "No space is necessary after a cast\n" . $hereprev); |
| } |
| |
| if ($realfile =~ m@^(drivers/net/|net/)@ && |
| $rawline =~ /^\+[ \t]*\/\*[ \t]*$/ && |
| $prevrawline =~ /^\+[ \t]*$/) { |
| WARN("NETWORKING_BLOCK_COMMENT_STYLE", |
| "networking block comments don't use an empty /* line, use /* Comment...\n" . $hereprev); |
| } |
| |
| if ($realfile =~ m@^(drivers/net/|net/)@ && |
| $rawline !~ m@^\+[ \t]*\*/[ \t]*$@ && #trailing */ |
| $rawline !~ m@^\+.*/\*.*\*/[ \t]*$@ && #inline /*...*/ |
| $rawline !~ m@^\+.*\*{2,}/[ \t]*$@ && #trailing **/ |
| $rawline =~ m@^\+[ \t]*.+\*\/[ \t]*$@) { #non blank */ |
| WARN("NETWORKING_BLOCK_COMMENT_STYLE", |
| "networking block comments put the trailing */ on a separate line\n" . $herecurr); |
| } |
| |
| # check for spaces at the beginning of a line. |
| # Exceptions: |
| # 1) within comments |
| # 2) indented preprocessor commands |
| # 3) hanging labels |
| if ($rawline =~ /^\+ / && $line !~ /\+ *(?:$;|#|$Ident:)/) { |
| my $herevet = "$here\n" . cat_vet($rawline) . "\n"; |
| WARN("LEADING_SPACE", |
| "please, no spaces at the start of a line\n" . $herevet); |
| } |
| |
| # check we are in a valid C source file if not then ignore this hunk |
| next if ($realfile !~ /\.(h|c)$/); |
| |
| # discourage the addition of CONFIG_EXPERIMENTAL in #if(def). |
| if ($line =~ /^\+\s*\#\s*if.*\bCONFIG_EXPERIMENTAL\b/) { |
| WARN("CONFIG_EXPERIMENTAL", |
| "Use of CONFIG_EXPERIMENTAL is deprecated. For alternatives, see https://lkml.org/lkml/2012/10/23/580\n"); |
| } |
| |
| # check for RCS/CVS revision markers |
| if ($rawline =~ /^\+.*\$(Revision|Log|Id)(?:\$|)/) { |
| WARN("CVS_KEYWORD", |
| "CVS style keyword markers, these will _not_ be updated\n". $herecurr); |
| } |
| |
| # Blackfin: don't use __builtin_bfin_[cs]sync |
| if ($line =~ /__builtin_bfin_csync/) { |
| my $herevet = "$here\n" . cat_vet($line) . "\n"; |
| ERROR("CSYNC", |
| "use the CSYNC() macro in asm/blackfin.h\n" . $herevet); |
| } |
| if ($line =~ /__builtin_bfin_ssync/) { |
| my $herevet = "$here\n" . cat_vet($line) . "\n"; |
| ERROR("SSYNC", |
| "use the SSYNC() macro in asm/blackfin.h\n" . $herevet); |
| } |
| |
| # check for old HOTPLUG __dev<foo> section markings |
| if ($line =~ /\b(__dev(init|exit)(data|const|))\b/) { |
| WARN("HOTPLUG_SECTION", |
| "Using $1 is unnecessary\n" . $herecurr); |
| } |
| |
| # Check for potential 'bare' types |
| my ($stat, $cond, $line_nr_next, $remain_next, $off_next, |
| $realline_next); |
| #print "LINE<$line>\n"; |
| if ($linenr >= $suppress_statement && |
| $realcnt && $line =~ /.\s*\S/) { |
| ($stat, $cond, $line_nr_next, $remain_next, $off_next) = |
| ctx_statement_block($linenr, $realcnt, 0); |
| $stat =~ s/\n./\n /g; |
| $cond =~ s/\n./\n /g; |
| |
| #print "linenr<$linenr> <$stat>\n"; |
| # If this statement has no statement boundaries within |
| # it there is no point in retrying a statement scan |
| # until we hit end of it. |
| my $frag = $stat; $frag =~ s/;+\s*$//; |
| if ($frag !~ /(?:{|;)/) { |
| #print "skip<$line_nr_next>\n"; |
| $suppress_statement = $line_nr_next; |
| } |
| |
| # Find the real next line. |
| $realline_next = $line_nr_next; |
| if (defined $realline_next && |
| (!defined $lines[$realline_next - 1] || |
| substr($lines[$realline_next - 1], $off_next) =~ /^\s*$/)) { |
| $realline_next++; |
| } |
| |
| my $s = $stat; |
| $s =~ s/{.*$//s; |
| |
| # Ignore goto labels. |
| if ($s =~ /$Ident:\*$/s) { |
| |
| # Ignore functions being called |
| } elsif ($s =~ /^.\s*$Ident\s*\(/s) { |
| |
| } elsif ($s =~ /^.\s*else\b/s) { |
| |
| # declarations always start with types |
| } elsif ($prev_values eq 'E' && $s =~ /^.\s*(?:$Storage\s+)?(?:$Inline\s+)?(?:const\s+)?((?:\s*$Ident)+?)\b(?:\s+$Sparse)?\s*\**\s*(?:$Ident|\(\*[^\)]*\))(?:\s*$Modifier)?\s*(?:;|=|,|\()/s) { |
| my $type = $1; |
| $type =~ s/\s+/ /g; |
| possible($type, "A:" . $s); |
| |
| # definitions in global scope can only start with types |
| } elsif ($s =~ /^.(?:$Storage\s+)?(?:$Inline\s+)?(?:const\s+)?($Ident)\b\s*(?!:)/s) { |
| possible($1, "B:" . $s); |
| } |
| |
| # any (foo ... *) is a pointer cast, and foo is a type |
| while ($s =~ /\(($Ident)(?:\s+$Sparse)*[\s\*]+\s*\)/sg) { |
| possible($1, "C:" . $s); |
| } |
| |
| # Check for any sort of function declaration. |
| # int foo(something bar, other baz); |
| # void (*store_gdt)(x86_descr_ptr *); |
| if ($prev_values eq 'E' && $s =~ /^(.(?:typedef\s*)?(?:(?:$Storage|$Inline)\s*)*\s*$Type\s*(?:\b$Ident|\(\*\s*$Ident\))\s*)\(/s) { |
| my ($name_len) = length($1); |
| |
| my $ctx = $s; |
| substr($ctx, 0, $name_len + 1, ''); |
| $ctx =~ s/\)[^\)]*$//; |
| |
| for my $arg (split(/\s*,\s*/, $ctx)) { |
| if ($arg =~ /^(?:const\s+)?($Ident)(?:\s+$Sparse)*\s*\**\s*(:?\b$Ident)?$/s || $arg =~ /^($Ident)$/s) { |
| |
| possible($1, "D:" . $s); |
| } |
| } |
| } |
| |
| } |
| |
| # |
| # Checks which may be anchored in the context. |
| # |
| |
| # Check for switch () and associated case and default |
| # statements should be at the same indent. |
| if ($line=~/\bswitch\s*\(.*\)/) { |
| my $err = ''; |
| my $sep = ''; |
| my @ctx = ctx_block_outer($linenr, $realcnt); |
| shift(@ctx); |
| for my $ctx (@ctx) { |
| my ($clen, $cindent) = line_stats($ctx); |
| if ($ctx =~ /^\+\s*(case\s+|default:)/ && |
| $indent != $cindent) { |
| $err .= "$sep$ctx\n"; |
| $sep = ''; |
| } else { |
| $sep = "[...]\n"; |
| } |
| } |
| if ($err ne '') { |
| ERROR("SWITCH_CASE_INDENT_LEVEL", |
| "switch and case should be at the same indent\n$hereline$err"); |
| } |
| } |
| |
| # if/while/etc brace do not go on next line, unless defining a do while loop, |
| # or if that brace on the next line is for something else |
| if ($line =~ /(.*)\b((?:if|while|for|switch)\s*\(|do\b|else\b)/ && $line !~ /^.\s*\#/) { |
| my $pre_ctx = "$1$2"; |
| |
| my ($level, @ctx) = ctx_statement_level($linenr, $realcnt, 0); |
| |
| if ($line =~ /^\+\t{6,}/) { |
| WARN("DEEP_INDENTATION", |
| "Too many leading tabs - consider code refactoring\n" . $herecurr); |
| } |
| |
| my $ctx_cnt = $realcnt - $#ctx - 1; |
| my $ctx = join("\n", @ctx); |
| |
| my $ctx_ln = $linenr; |
| my $ctx_skip = $realcnt; |
| |
| while ($ctx_skip > $ctx_cnt || ($ctx_skip == $ctx_cnt && |
| defined $lines[$ctx_ln - 1] && |
| $lines[$ctx_ln - 1] =~ /^-/)) { |
| ##print "SKIP<$ctx_skip> CNT<$ctx_cnt>\n"; |
| $ctx_skip-- if (!defined $lines[$ctx_ln - 1] || $lines[$ctx_ln - 1] !~ /^-/); |
| $ctx_ln++; |
| } |
| |
| #print "realcnt<$realcnt> ctx_cnt<$ctx_cnt>\n"; |
| #print "pre<$pre_ctx>\nline<$line>\nctx<$ctx>\nnext<$lines[$ctx_ln - 1]>\n"; |
| |
| if ($ctx !~ /{\s*/ && defined($lines[$ctx_ln -1]) && $lines[$ctx_ln - 1] =~ /^\+\s*{/) { |
| ERROR("OPEN_BRACE", |
| "that open brace { should be on the previous line\n" . |
| "$here\n$ctx\n$rawlines[$ctx_ln - 1]\n"); |
| } |
| if ($level == 0 && $pre_ctx !~ /}\s*while\s*\($/ && |
| $ctx =~ /\)\s*\;\s*$/ && |
| defined $lines[$ctx_ln - 1]) |
| { |
| my ($nlength, $nindent) = line_stats($lines[$ctx_ln - 1]); |
| if ($nindent > $indent) { |
| WARN("TRAILING_SEMICOLON", |
| "trailing semicolon indicates no statements, indent implies otherwise\n" . |
| "$here\n$ctx\n$rawlines[$ctx_ln - 1]\n"); |
| } |
| } |
| } |
| |
| # Check relative indent for conditionals and blocks. |
| if ($line =~ /\b(?:(?:if|while|for)\s*\(|do\b)/ && $line !~ /^.\s*#/ && $line !~ /\}\s*while\s*/) { |
| ($stat, $cond, $line_nr_next, $remain_next, $off_next) = |
| ctx_statement_block($linenr, $realcnt, 0) |
| if (!defined $stat); |
| my ($s, $c) = ($stat, $cond); |
| |
| substr($s, 0, length($c), ''); |
| |
| # Make sure we remove the line prefixes as we have |
| # none on the first line, and are going to readd them |
| # where necessary. |
| $s =~ s/\n./\n/gs; |
| |
| # Find out how long the conditional actually is. |
| my @newlines = ($c =~ /\n/gs); |
| my $cond_lines = 1 + $#newlines; |
| |
| # We want to check the first line inside the block |
| # starting at the end of the conditional, so remove: |
| # 1) any blank line termination |
| # 2) any opening brace { on end of the line |
| # 3) any do (...) { |
| my $continuation = 0; |
| my $check = 0; |
| $s =~ s/^.*\bdo\b//; |
| $s =~ s/^\s*{//; |
| if ($s =~ s/^\s*\\//) { |
| $continuation = 1; |
| } |
| if ($s =~ s/^\s*?\n//) { |
| $check = 1; |
| $cond_lines++; |
| } |
| |
| # Also ignore a loop construct at the end of a |
| # preprocessor statement. |
| if (($prevline =~ /^.\s*#\s*define\s/ || |
| $prevline =~ /\\\s*$/) && $continuation == 0) { |
| $check = 0; |
| } |
| |
| my $cond_ptr = -1; |
| $continuation = 0; |
| while ($cond_ptr != $cond_lines) { |
| $cond_ptr = $cond_lines; |
| |
| # If we see an #else/#elif then the code |
| # is not linear. |
| if ($s =~ /^\s*\#\s*(?:else|elif)/) { |
| $check = 0; |
| } |
| |
| # Ignore: |
| # 1) blank lines, they should be at 0, |
| # 2) preprocessor lines, and |
| # 3) labels. |
| if ($continuation || |
| $s =~ /^\s*?\n/ || |
| $s =~ /^\s*#\s*?/ || |
| $s =~ /^\s*$Ident\s*:/) { |
| $continuation = ($s =~ /^.*?\\\n/) ? 1 : 0; |
| if ($s =~ s/^.*?\n//) { |
| $cond_lines++; |
| } |
| } |
| } |
| |
| my (undef, $sindent) = line_stats("+" . $s); |
| my $stat_real = raw_line($linenr, $cond_lines); |
| |
| # Check if either of these lines are modified, else |
| # this is not this patch's fault. |
| if (!defined($stat_real) || |
| $stat !~ /^\+/ && $stat_real !~ /^\+/) { |
| $check = 0; |
| } |
| if (defined($stat_real) && $cond_lines > 1) { |
| $stat_real = "[...]\n$stat_real"; |
| } |
| |
| #print "line<$line> prevline<$prevline> indent<$indent> sindent<$sindent> check<$check> continuation<$continuation> s<$s> cond_lines<$cond_lines> stat_real<$stat_real> stat<$stat>\n"; |
| |
| if ($check && (($sindent % 8) != 0 || |
| ($sindent <= $indent && $s ne ''))) { |
| WARN("SUSPECT_CODE_INDENT", |
| "suspect code indent for conditional statements ($indent, $sindent)\n" . $herecurr . "$stat_real\n"); |
| } |
| } |
| |
| # Track the 'values' across context and added lines. |
| my $opline = $line; $opline =~ s/^./ /; |
| my ($curr_values, $curr_vars) = |
| annotate_values($opline . "\n", $prev_values); |
| $curr_values = $prev_values . $curr_values; |
| if ($dbg_values) { |
| my $outline = $opline; $outline =~ s/\t/ /g; |
| print "$linenr > .$outline\n"; |
| print "$linenr > $curr_values\n"; |
| print "$linenr > $curr_vars\n"; |
| } |
| $prev_values = substr($curr_values, -1); |
| |
| #ignore lines not being added |
| if ($line=~/^[^\+]/) {next;} |
| |
| # TEST: allow direct testing of the type matcher. |
| if ($dbg_type) { |
| if ($line =~ /^.\s*$Declare\s*$/) { |
| ERROR("TEST_TYPE", |
| "TEST: is type\n" . $herecurr); |
| } elsif ($dbg_type > 1 && $line =~ /^.+($Declare)/) { |
| ERROR("TEST_NOT_TYPE", |
| "TEST: is not type ($1 is)\n". $herecurr); |
| } |
| next; |
| } |
| # TEST: allow direct testing of the attribute matcher. |
| if ($dbg_attr) { |
| if ($line =~ /^.\s*$Modifier\s*$/) { |
| ERROR("TEST_ATTR", |
| "TEST: is attr\n" . $herecurr); |
| } elsif ($dbg_attr > 1 && $line =~ /^.+($Modifier)/) { |
| ERROR("TEST_NOT_ATTR", |
| "TEST: is not attr ($1 is)\n". $herecurr); |
| } |
| next; |
| } |
| |
| # check for initialisation to aggregates open brace on the next line |
| if ($line =~ /^.\s*{/ && |
| $prevline =~ /(?:^|[^=])=\s*$/) { |
| ERROR("OPEN_BRACE", |
| "that open brace { should be on the previous line\n" . $hereprev); |
| } |
| |
| # |
| # Checks which are anchored on the added line. |
| # |
| |
| # check for malformed paths in #include statements (uses RAW line) |
| if ($rawline =~ m{^.\s*\#\s*include\s+[<"](.*)[">]}) { |
| my $path = $1; |
| if ($path =~ m{//}) { |
| ERROR("MALFORMED_INCLUDE", |
| "malformed #include filename\n" . $herecurr); |
| } |
| if ($path =~ "^uapi/" && $realfile =~ m@\binclude/uapi/@) { |
| ERROR("UAPI_INCLUDE", |
| "No #include in ...include/uapi/... should use a uapi/ path prefix\n" . $herecurr); |
| } |
| } |
| |
| # no C99 // comments |
| if ($line =~ m{//}) { |
| ERROR("C99_COMMENTS", |
| "do not use C99 // comments\n" . $herecurr); |
| } |
| # Remove C99 comments. |
| $line =~ s@//.*@@; |
| $opline =~ s@//.*@@; |
| |
| # EXPORT_SYMBOL should immediately follow the thing it is exporting, consider |
| # the whole statement. |
| #print "APW <$lines[$realline_next - 1]>\n"; |
| if (defined $realline_next && |
| exists $lines[$realline_next - 1] && |
| !defined $suppress_export{$realline_next} && |
| ($lines[$realline_next - 1] =~ /EXPORT_SYMBOL.*\((.*)\)/ || |
| $lines[$realline_next - 1] =~ /EXPORT_UNUSED_SYMBOL.*\((.*)\)/)) { |
| # Handle definitions which produce identifiers with |
| # a prefix: |
| # XXX(foo); |
| # EXPORT_SYMBOL(something_foo); |
| my $name = $1; |
| if ($stat =~ /^(?:.\s*}\s*\n)?.([A-Z_]+)\s*\(\s*($Ident)/ && |
| $name =~ /^${Ident}_$2/) { |
| #print "FOO C name<$name>\n"; |
| $suppress_export{$realline_next} = 1; |
| |
| } elsif ($stat !~ /(?: |
| \n.}\s*$| |
| ^.DEFINE_$Ident\(\Q$name\E\)| |
| ^.DECLARE_$Ident\(\Q$name\E\)| |
| ^.LIST_HEAD\(\Q$name\E\)| |
| ^.(?:$Storage\s+)?$Type\s*\(\s*\*\s*\Q$name\E\s*\)\s*\(| |
| \b\Q$name\E(?:\s+$Attribute)*\s*(?:;|=|\[|\() |
| )/x) { |
| #print "FOO A<$lines[$realline_next - 1]> stat<$stat> name<$name>\n"; |
| $suppress_export{$realline_next} = 2; |
| } else { |
| $suppress_export{$realline_next} = 1; |
| } |
| } |
| if (!defined $suppress_export{$linenr} && |
| $prevline =~ /^.\s*$/ && |
| ($line =~ /EXPORT_SYMBOL.*\((.*)\)/ || |
| $line =~ /EXPORT_UNUSED_SYMBOL.*\((.*)\)/)) { |
| #print "FOO B <$lines[$linenr - 1]>\n"; |
| $suppress_export{$linenr} = 2; |
| } |
| if (defined $suppress_export{$linenr} && |
| $suppress_export{$linenr} == 2) { |
| WARN("EXPORT_SYMBOL", |
| "EXPORT_SYMBOL(foo); should immediately follow its function/variable\n" . $herecurr); |
| } |
| |
| # check for global initialisers. |
| if ($line =~ /^.$Type\s*$Ident\s*(?:\s+$Modifier)*\s*=\s*(0|NULL|false)\s*;/) { |
| ERROR("GLOBAL_INITIALISERS", |
| "do not initialise globals to 0 or NULL\n" . |
| $herecurr); |
| } |
| # check for static initialisers. |
| if ($line =~ /\bstatic\s.*=\s*(0|NULL|false)\s*;/) { |
| ERROR("INITIALISED_STATIC", |
| "do not initialise statics to 0 or NULL\n" . |
| $herecurr); |
| } |
| |
| # check for static const char * arrays. |
| if ($line =~ /\bstatic\s+const\s+char\s*\*\s*(\w+)\s*\[\s*\]\s*=\s*/) { |
| WARN("STATIC_CONST_CHAR_ARRAY", |
| "static const char * array should probably be static const char * const\n" . |
| $herecurr); |
| } |
| |
| # check for static char foo[] = "bar" declarations. |
| if ($line =~ /\bstatic\s+char\s+(\w+)\s*\[\s*\]\s*=\s*"/) { |
| WARN("STATIC_CONST_CHAR_ARRAY", |
| "static char array declaration should probably be static const char\n" . |
| $herecurr); |
| } |
| |
| # check for declarations of struct pci_device_id |
| if ($line =~ /\bstruct\s+pci_device_id\s+\w+\s*\[\s*\]\s*\=\s*\{/) { |
| WARN("DEFINE_PCI_DEVICE_TABLE", |
| "Use DEFINE_PCI_DEVICE_TABLE for struct pci_device_id\n" . $herecurr); |
| } |
| |
| # check for new typedefs, only function parameters and sparse annotations |
| # make sense. |
| if ($line =~ /\btypedef\s/ && |
| $line !~ /\btypedef\s+$Type\s*\(\s*\*?$Ident\s*\)\s*\(/ && |
| $line !~ /\btypedef\s+$Type\s+$Ident\s*\(/ && |
| $line !~ /\b$typeTypedefs\b/ && |
| $line !~ /\b__bitwise(?:__|)\b/) { |
| WARN("NEW_TYPEDEFS", |
| "do not add new typedefs\n" . $herecurr); |
| } |
| |
| # * goes on variable not on type |
| # (char*[ const]) |
| while ($line =~ m{(\($NonptrType(\s*(?:$Modifier\b\s*|\*\s*)+)\))}g) { |
| #print "AA<$1>\n"; |
| my ($from, $to) = ($2, $2); |
| |
| # Should start with a space. |
| $to =~ s/^(\S)/ $1/; |
| # Should not end with a space. |
| $to =~ s/\s+$//; |
| # '*'s should not have spaces between. |
| while ($to =~ s/\*\s+\*/\*\*/) { |
| } |
| |
| #print "from<$from> to<$to>\n"; |
| if ($from ne $to) { |
| ERROR("POINTER_LOCATION", |
| "\"(foo$from)\" should be \"(foo$to)\"\n" . $herecurr); |
| } |
| } |
| while ($line =~ m{(\b$NonptrType(\s*(?:$Modifier\b\s*|\*\s*)+)($Ident))}g) { |
| #print "BB<$1>\n"; |
| my ($from, $to, $ident) = ($2, $2, $3); |
| |
| # Should start with a space. |
| $to =~ s/^(\S)/ $1/; |
| # Should not end with a space. |
| $to =~ s/\s+$//; |
| # '*'s should not have spaces between. |
| while ($to =~ s/\*\s+\*/\*\*/) { |
| } |
| # Modifiers should have spaces. |
| $to =~ s/(\b$Modifier$)/$1 /; |
| |
| #print "from<$from> to<$to> ident<$ident>\n"; |
| if ($from ne $to && $ident !~ /^$Modifier$/) { |
| ERROR("POINTER_LOCATION", |
| "\"foo${from}bar\" should be \"foo${to}bar\"\n" . $herecurr); |
| } |
| } |
| |
| # # no BUG() or BUG_ON() |
| # if ($line =~ /\b(BUG|BUG_ON)\b/) { |
| # print "Try to use WARN_ON & Recovery code rather than BUG() or BUG_ON()\n"; |
| # print "$herecurr"; |
| # $clean = 0; |
| # } |
| |
| if ($line =~ /\bLINUX_VERSION_CODE\b/) { |
| WARN("LINUX_VERSION_CODE", |
| "LINUX_VERSION_CODE should be avoided, code should be for the version to which it is merged\n" . $herecurr); |
| } |
| |
| # check for uses of printk_ratelimit |
| if ($line =~ /\bprintk_ratelimit\s*\(/) { |
| WARN("PRINTK_RATELIMITED", |
| "Prefer printk_ratelimited or pr_<level>_ratelimited to printk_ratelimit\n" . $herecurr); |
| } |
| |
| # printk should use KERN_* levels. Note that follow on printk's on the |
| # same line do not need a level, so we use the current block context |
| # to try and find and validate the current printk. In summary the current |
| # printk includes all preceding printk's which have no newline on the end. |
| # we assume the first bad printk is the one to report. |
| if ($line =~ /\bprintk\((?!KERN_)\s*"/) { |
| my $ok = 0; |
| for (my $ln = $linenr - 1; $ln >= $first_line; $ln--) { |
| #print "CHECK<$lines[$ln - 1]\n"; |
| # we have a preceding printk if it ends |
| # with "\n" ignore it, else it is to blame |
| if ($lines[$ln - 1] =~ m{\bprintk\(}) { |
| if ($rawlines[$ln - 1] !~ m{\\n"}) { |
| $ok = 1; |
| } |
| last; |
| } |
| } |
| if ($ok == 0) { |
| WARN("PRINTK_WITHOUT_KERN_LEVEL", |
| "printk() should include KERN_ facility level\n" . $herecurr); |
| } |
| } |
| |
| if ($line =~ /\bprintk\s*\(\s*KERN_([A-Z]+)/) { |
| my $orig = $1; |
| my $level = lc($orig); |
| $level = "warn" if ($level eq "warning"); |
| my $level2 = $level; |
| $level2 = "dbg" if ($level eq "debug"); |
| WARN("PREFER_PR_LEVEL", |
| "Prefer netdev_$level2(netdev, ... then dev_$level2(dev, ... then pr_$level(... to printk(KERN_$orig ...\n" . $herecurr); |
| } |
| |
| if ($line =~ /\bpr_warning\s*\(/) { |
| WARN("PREFER_PR_LEVEL", |
| "Prefer pr_warn(... to pr_warning(...\n" . $herecurr); |
| } |
| |
| if ($line =~ /\bdev_printk\s*\(\s*KERN_([A-Z]+)/) { |
| my $orig = $1; |
| my $level = lc($orig); |
| $level = "warn" if ($level eq "warning"); |
| $level = "dbg" if ($level eq "debug"); |
| WARN("PREFER_DEV_LEVEL", |
| "Prefer dev_$level(... to dev_printk(KERN_$orig, ...\n" . $herecurr); |
| } |
| |
| # function brace can't be on same line, except for #defines of do while, |
| # or if closed on same line |
| if (($line=~/$Type\s*$Ident\(.*\).*\s{/) and |
| !($line=~/\#\s*define.*do\s{/) and !($line=~/}/)) { |
| ERROR("OPEN_BRACE", |
| "open brace '{' following function declarations go on the next line\n" . $herecurr); |
| } |
| |
| # open braces for enum, union and struct go on the same line. |
| if ($line =~ /^.\s*{/ && |
| $prevline =~ /^.\s*(?:typedef\s+)?(enum|union|struct)(?:\s+$Ident)?\s*$/) { |
| ERROR("OPEN_BRACE", |
| "open brace '{' following $1 go on the same line\n" . $hereprev); |
| } |
| |
| # missing space after union, struct or enum definition |
| if ($line =~ /^.\s*(?:typedef\s+)?(enum|union|struct)(?:\s+$Ident)?(?:\s+$Ident)?[=\{]/) { |
| WARN("SPACING", |
| "missing space after $1 definition\n" . $herecurr); |
| } |
| |
| # check for spacing round square brackets; allowed: |
| # 1. with a type on the left -- int [] a; |
| # 2. at the beginning of a line for slice initialisers -- [0...10] = 5, |
| # 3. inside a curly brace -- = { [0...10] = 5 } |
| while ($line =~ /(.*?\s)\[/g) { |
| my ($where, $prefix) = ($-[1], $1); |
| if ($prefix !~ /$Type\s+$/ && |
| ($where != 0 || $prefix !~ /^.\s+$/) && |
| $prefix !~ /[{,]\s+$/) { |
| ERROR("BRACKET_SPACE", |
| "space prohibited before open square bracket '['\n" . $herecurr); |
| } |
| } |
| |
| # check for spaces between functions and their parentheses. |
| while ($line =~ /($Ident)\s+\(/g) { |
| my $name = $1; |
| my $ctx_before = substr($line, 0, $-[1]); |
| my $ctx = "$ctx_before$name"; |
| |
| # Ignore those directives where spaces _are_ permitted. |
| if ($name =~ /^(?: |
| if|for|while|switch|return|case| |
| volatile|__volatile__| |
| __attribute__|format|__extension__| |
| asm|__asm__)$/x) |
| { |
| |
| # cpp #define statements have non-optional spaces, ie |
| # if there is a space between the name and the open |
| # parenthesis it is simply not a parameter group. |
| } elsif ($ctx_before =~ /^.\s*\#\s*define\s*$/) { |
| |
| # cpp #elif statement condition may start with a ( |
| } elsif ($ctx =~ /^.\s*\#\s*elif\s*$/) { |
| |
| # If this whole things ends with a type its most |
| # likely a typedef for a function. |
| } elsif ($ctx =~ /$Type$/) { |
| |
| } else { |
| WARN("SPACING", |
| "space prohibited between function name and open parenthesis '('\n" . $herecurr); |
| } |
| } |
| |
| # check for whitespace before a non-naked semicolon |
| if ($line =~ /^\+.*\S\s+;/) { |
| CHK("SPACING", |
| "space prohibited before semicolon\n" . $herecurr); |
| } |
| |
| # Check operator spacing. |
| if (!($line=~/\#\s*include/)) { |
| my $ops = qr{ |
| <<=|>>=|<=|>=|==|!=| |
| \+=|-=|\*=|\/=|%=|\^=|\|=|&=| |
| =>|->|<<|>>|<|>|=|!|~| |
| &&|\|\||,|\^|\+\+|--|&|\||\+|-|\*|\/|%| |
| \?|: |
| }x; |
| my @elements = split(/($ops|;)/, $opline); |
| my $off = 0; |
| |
| my $blank = copy_spacing($opline); |
| |
| for (my $n = 0; $n < $#elements; $n += 2) { |
| $off += length($elements[$n]); |
| |
| # Pick up the preceding and succeeding characters. |
| my $ca = substr($opline, 0, $off); |
| my $cc = ''; |
| if (length($opline) >= ($off + length($elements[$n + 1]))) { |
| $cc = substr($opline, $off + length($elements[$n + 1])); |
| } |
| my $cb = "$ca$;$cc"; |
| |
| my $a = ''; |
| $a = 'V' if ($elements[$n] ne ''); |
| $a = 'W' if ($elements[$n] =~ /\s$/); |
| $a = 'C' if ($elements[$n] =~ /$;$/); |
| $a = 'B' if ($elements[$n] =~ /(\[|\()$/); |
| $a = 'O' if ($elements[$n] eq ''); |
| $a = 'E' if ($ca =~ /^\s*$/); |
| |
| my $op = $elements[$n + 1]; |
| |
| my $c = ''; |
| if (defined $elements[$n + 2]) { |
| $c = 'V' if ($elements[$n + 2] ne ''); |
| $c = 'W' if ($elements[$n + 2] =~ /^\s/); |
| $c = 'C' if ($elements[$n + 2] =~ /^$;/); |
| $c = 'B' if ($elements[$n + 2] =~ /^(\)|\]|;)/); |
| $c = 'O' if ($elements[$n + 2] eq ''); |
| $c = 'E' if ($elements[$n + 2] =~ /^\s*\\$/); |
| } else { |
| $c = 'E'; |
| } |
| |
| my $ctx = "${a}x${c}"; |
| |
| my $at = "(ctx:$ctx)"; |
| |
| my $ptr = substr($blank, 0, $off) . "^"; |
| my $hereptr = "$hereline$ptr\n"; |
| |
| # Pull out the value of this operator. |
| my $op_type = substr($curr_values, $off + 1, 1); |
| |
| # Get the full operator variant. |
| my $opv = $op . substr($curr_vars, $off, 1); |
| |
| # Ignore operators passed as parameters. |
| if ($op_type ne 'V' && |
| $ca =~ /\s$/ && $cc =~ /^\s*,/) { |
| |
| # # Ignore comments |
| # } elsif ($op =~ /^$;+$/) { |
| |
| # ; should have either the end of line or a space or \ after it |
| } elsif ($op eq ';') { |
| if ($ctx !~ /.x[WEBC]/ && |
| $cc !~ /^\\/ && $cc !~ /^;/) { |
| ERROR("SPACING", |
| "space required after that '$op' $at\n" . $hereptr); |
| } |
| |
| # // is a comment |
| } elsif ($op eq '//') { |
| |
| # No spaces for: |
| # -> |
| # : when part of a bitfield |
| } elsif ($op eq '->' || $opv eq ':B') { |
| if ($ctx =~ /Wx.|.xW/) { |
| ERROR("SPACING", |
| "spaces prohibited around that '$op' $at\n" . $hereptr); |
| } |
| |
| # , must have a space on the right. |
| } elsif ($op eq ',') { |
| if ($ctx !~ /.x[WEC]/ && $cc !~ /^}/) { |
| ERROR("SPACING", |
| "space required after that '$op' $at\n" . $hereptr); |
| } |
| |
| # '*' as part of a type definition -- reported already. |
| } elsif ($opv eq '*_') { |
| #warn "'*' is part of type\n"; |
| |
| # unary operators should have a space before and |
| # none after. May be left adjacent to another |
| # unary operator, or a cast |
| } elsif ($op eq '!' || $op eq '~' || |
| $opv eq '*U' || $opv eq '-U' || |
| $opv eq '&U' || $opv eq '&&U') { |
| if ($ctx !~ /[WEBC]x./ && $ca !~ /(?:\)|!|~|\*|-|\&|\||\+\+|\-\-|\{)$/) { |
| ERROR("SPACING", |
| "space required before that '$op' $at\n" . $hereptr); |
| } |
| if ($op eq '*' && $cc =~/\s*$Modifier\b/) { |
| # A unary '*' may be const |
| |
| } elsif ($ctx =~ /.xW/) { |
| ERROR("SPACING", |
| "space prohibited after that '$op' $at\n" . $hereptr); |
| } |
| |
| # unary ++ and unary -- are allowed no space on one side. |
| } elsif ($op eq '++' or $op eq '--') { |
| if ($ctx !~ /[WEOBC]x[^W]/ && $ctx !~ /[^W]x[WOBEC]/) { |
| ERROR("SPACING", |
| "space required one side of that '$op' $at\n" . $hereptr); |
| } |
| if ($ctx =~ /Wx[BE]/ || |
| ($ctx =~ /Wx./ && $cc =~ /^;/)) { |
| ERROR("SPACING", |
| "space prohibited before that '$op' $at\n" . $hereptr); |
| } |
| if ($ctx =~ /ExW/) { |
| ERROR("SPACING", |
| "space prohibited after that '$op' $at\n" . $hereptr); |
| } |
| |
| |
| # << and >> may either have or not have spaces both sides |
| } elsif ($op eq '<<' or $op eq '>>' or |
| $op eq '&' or $op eq '^' or $op eq '|' or |
| $op eq '+' or $op eq '-' or |
| $op eq '*' or $op eq '/' or |
| $op eq '%') |
| { |
| if ($ctx =~ /Wx[^WCE]|[^WCE]xW/) { |
| ERROR("SPACING", |
| "need consistent spacing around '$op' $at\n" . |
| $hereptr); |
| } |
| |
| # A colon needs no spaces before when it is |
| # terminating a case value or a label. |
| } elsif ($opv eq ':C' || $opv eq ':L') { |
| if ($ctx =~ /Wx./) { |
| ERROR("SPACING", |
| "space prohibited before that '$op' $at\n" . $hereptr); |
| } |
| |
| # All the others need spaces both sides. |
| } elsif ($ctx !~ /[EWC]x[CWE]/) { |
| my $ok = 0; |
| |
| # Ignore email addresses <foo@bar> |
| if (($op eq '<' && |
| $cc =~ /^\S+\@\S+>/) || |
| ($op eq '>' && |
| $ca =~ /<\S+\@\S+$/)) |
| { |
| $ok = 1; |
| } |
| |
| # Ignore ?: |
| if (($opv eq ':O' && $ca =~ /\?$/) || |
| ($op eq '?' && $cc =~ /^:/)) { |
| $ok = 1; |
| } |
| |
| if ($ok == 0) { |
| ERROR("SPACING", |
| "spaces required around that '$op' $at\n" . $hereptr); |
| } |
| } |
| $off += length($elements[$n + 1]); |
| } |
| } |
| |
| # check for multiple assignments |
| if ($line =~ /^.\s*$Lval\s*=\s*$Lval\s*=(?!=)/) { |
| CHK("MULTIPLE_ASSIGNMENTS", |
| "multiple assignments should be avoided\n" . $herecurr); |
| } |
| |
| ## # check for multiple declarations, allowing for a function declaration |
| ## # continuation. |
| ## if ($line =~ /^.\s*$Type\s+$Ident(?:\s*=[^,{]*)?\s*,\s*$Ident.*/ && |
| ## $line !~ /^.\s*$Type\s+$Ident(?:\s*=[^,{]*)?\s*,\s*$Type\s*$Ident.*/) { |
| ## |
| ## # Remove any bracketed sections to ensure we do not |
| ## # falsly report the parameters of functions. |
| ## my $ln = $line; |
| ## while ($ln =~ s/\([^\(\)]*\)//g) { |
| ## } |
| ## if ($ln =~ /,/) { |
| ## WARN("MULTIPLE_DECLARATION", |
| ## "declaring multiple variables together should be avoided\n" . $herecurr); |
| ## } |
| ## } |
| |
| #need space before brace following if, while, etc |
| if (($line =~ /\(.*\){/ && $line !~ /\($Type\){/) || |
| $line =~ /do{/) { |
| ERROR("SPACING", |
| "space required before the open brace '{'\n" . $herecurr); |
| } |
| |
| # closing brace should have a space following it when it has anything |
| # on the line |
| if ($line =~ /}(?!(?:,|;|\)))\S/) { |
| ERROR("SPACING", |
| "space required after that close brace '}'\n" . $herecurr); |
| } |
| |
| # check spacing on square brackets |
| if ($line =~ /\[\s/ && $line !~ /\[\s*$/) { |
| ERROR("SPACING", |
| "space prohibited after that open square bracket '['\n" . $herecurr); |
| } |
| if ($line =~ /\s\]/) { |
| ERROR("SPACING", |
| "space prohibited before that close square bracket ']'\n" . $herecurr); |
| } |
| |
| # check spacing on parentheses |
| if ($line =~ /\(\s/ && $line !~ /\(\s*(?:\\)?$/ && |
| $line !~ /for\s*\(\s+;/) { |
| ERROR("SPACING", |
| "space prohibited after that open parenthesis '('\n" . $herecurr); |
| } |
| if ($line =~ /(\s+)\)/ && $line !~ /^.\s*\)/ && |
| $line !~ /for\s*\(.*;\s+\)/ && |
| $line !~ /:\s+\)/) { |
| ERROR("SPACING", |
| "space prohibited before that close parenthesis ')'\n" . $herecurr); |
| } |
| |
| #goto labels aren't indented, allow a single space however |
| if ($line=~/^.\s+[A-Za-z\d_]+:(?![0-9]+)/ and |
| !($line=~/^. [A-Za-z\d_]+:/) and !($line=~/^.\s+default:/)) { |
| WARN("INDENTED_LABEL", |
| "labels should not be indented\n" . $herecurr); |
| } |
| |
| # Return is not a function. |
| if (defined($stat) && $stat =~ /^.\s*return(\s*)(\(.*);/s) { |
| my $spacing = $1; |
| my $value = $2; |
| |
| # Flatten any parentheses |
| $value =~ s/\(/ \(/g; |
| $value =~ s/\)/\) /g; |
| while ($value =~ s/\[[^\[\]]*\]/1/ || |
| $value !~ /(?:$Ident|-?$Constant)\s* |
| $Compare\s* |
| (?:$Ident|-?$Constant)/x && |
| $value =~ s/\([^\(\)]*\)/1/) { |
| } |
| #print "value<$value>\n"; |
| if ($value =~ /^\s*(?:$Ident|-?$Constant)\s*$/) { |
| ERROR("RETURN_PARENTHESES", |
| "return is not a function, parentheses are not required\n" . $herecurr); |
| |
| } elsif ($spacing !~ /\s+/) { |
| ERROR("SPACING", |
| "space required before the open parenthesis '('\n" . $herecurr); |
| } |
| } |
| # Return of what appears to be an errno should normally be -'ve |
| if ($line =~ /^.\s*return\s*(E[A-Z]*)\s*;/) { |
| my $name = $1; |
| if ($name ne 'EOF' && $name ne 'ERROR') { |
| WARN("USE_NEGATIVE_ERRNO", |
| "return of an errno should typically be -ve (return -$1)\n" . $herecurr); |
| } |
| } |
| |
| # Need a space before open parenthesis after if, while etc |
| if ($line=~/\b(if|while|for|switch)\(/) { |
| ERROR("SPACING", "space required before the open parenthesis '('\n" . $herecurr); |
| } |
| |
| # Check for illegal assignment in if conditional -- and check for trailing |
| # statements after the conditional. |
| if ($line =~ /do\s*(?!{)/) { |
| ($stat, $cond, $line_nr_next, $remain_next, $off_next) = |
| ctx_statement_block($linenr, $realcnt, 0) |
| if (!defined $stat); |
| my ($stat_next) = ctx_statement_block($line_nr_next, |
| $remain_next, $off_next); |
| $stat_next =~ s/\n./\n /g; |
| ##print "stat<$stat> stat_next<$stat_next>\n"; |
| |
| if ($stat_next =~ /^\s*while\b/) { |
| # If the statement carries leading newlines, |
| # then count those as offsets. |
| my ($whitespace) = |
| ($stat_next =~ /^((?:\s*\n[+-])*\s*)/s); |
| my $offset = |
| statement_rawlines($whitespace) - 1; |
| |
| $suppress_whiletrailers{$line_nr_next + |
| $offset} = 1; |
| } |
| } |
| if (!defined $suppress_whiletrailers{$linenr} && |
| $line =~ /\b(?:if|while|for)\s*\(/ && $line !~ /^.\s*#/) { |
| my ($s, $c) = ($stat, $cond); |
| |
| if ($c =~ /\bif\s*\(.*[^<>!=]=[^=].*/s) { |
| ERROR("ASSIGN_IN_IF", |
| "do not use assignment in if condition\n" . $herecurr); |
| } |
| |
| # Find out what is on the end of the line after the |
| # conditional. |
| substr($s, 0, length($c), ''); |
| $s =~ s/\n.*//g; |
| $s =~ s/$;//g; # Remove any comments |
| if (length($c) && $s !~ /^\s*{?\s*\\*\s*$/ && |
| $c !~ /}\s*while\s*/) |
| { |
| # Find out how long the conditional actually is. |
| my @newlines = ($c =~ /\n/gs); |
| my $cond_lines = 1 + $#newlines; |
| my $stat_real = ''; |
| |
| $stat_real = raw_line($linenr, $cond_lines) |
| . "\n" if ($cond_lines); |
| if (defined($stat_real) && $cond_lines > 1) { |
| $stat_real = "[...]\n$stat_real"; |
| } |
| |
| ERROR("TRAILING_STATEMENTS", |
| "trailing statements should be on next line\n" . $herecurr . $stat_real); |
| } |
| } |
| |
| # Check for bitwise tests written as boolean |
| if ($line =~ / |
| (?: |
| (?:\[|\(|\&\&|\|\|) |
| \s*0[xX][0-9]+\s* |
| (?:\&\&|\|\|) |
| | |
| (?:\&\&|\|\|) |
| \s*0[xX][0-9]+\s* |
| (?:\&\&|\|\||\)|\]) |
| )/x) |
| { |
| WARN("HEXADECIMAL_BOOLEAN_TEST", |
| "boolean test with hexadecimal, perhaps just 1 \& or \|?\n" . $herecurr); |
| } |
| |
| # if and else should not have general statements after it |
| if ($line =~ /^.\s*(?:}\s*)?else\b(.*)/) { |
| my $s = $1; |
| $s =~ s/$;//g; # Remove any comments |
| if ($s !~ /^\s*(?:\sif|(?:{|)\s*\\?\s*$)/) { |
| ERROR("TRAILING_STATEMENTS", |
| "trailing statements should be on next line\n" . $herecurr); |
| } |
| } |
| # if should not continue a brace |
| if ($line =~ /}\s*if\b/) { |
| ERROR("TRAILING_STATEMENTS", |
| "trailing statements should be on next line\n" . |
| $herecurr); |
| } |
| # case and default should not have general statements after them |
| if ($line =~ /^.\s*(?:case\s*.*|default\s*):/g && |
| $line !~ /\G(?: |
| (?:\s*$;*)(?:\s*{)?(?:\s*$;*)(?:\s*\\)?\s*$| |
| \s*return\s+ |
| )/xg) |
| { |
| ERROR("TRAILING_STATEMENTS", |
| "trailing statements should be on next line\n" . $herecurr); |
| } |
| |
| # Check for }<nl>else {, these must be at the same |
| # indent level to be relevant to each other. |
| if ($prevline=~/}\s*$/ and $line=~/^.\s*else\s*/ and |
| $previndent == $indent) { |
| ERROR("ELSE_AFTER_BRACE", |
| "else should follow close brace '}'\n" . $hereprev); |
| } |
| |
| if ($prevline=~/}\s*$/ and $line=~/^.\s*while\s*/ and |
| $previndent == $indent) { |
| my ($s, $c) = ctx_statement_block($linenr, $realcnt, 0); |
| |
| # Find out what is on the end of the line after the |
| # conditional. |
| substr($s, 0, length($c), ''); |
| $s =~ s/\n.*//g; |
| |
| if ($s =~ /^\s*;/) { |
| ERROR("WHILE_AFTER_BRACE", |
| "while should follow close brace '}'\n" . $hereprev); |
| } |
| } |
| |
| #CamelCase |
| while ($line =~ m{($Constant|$Lval)}g) { |
| my $var = $1; |
| if ($var !~ /$Constant/ && |
| $var =~ /[A-Z]\w*[a-z]|[a-z]\w*[A-Z]/ && |
| $var !~ /"^(?:Clear|Set|TestClear|TestSet|)Page[A-Z]/ && |
| !defined $camelcase{$var}) { |
| $camelcase{$var} = 1; |
| WARN("CAMELCASE", |
| "Avoid CamelCase: <$var>\n" . $herecurr); |
| } |
| } |
| |
| #no spaces allowed after \ in define |
| if ($line=~/\#\s*define.*\\\s$/) { |
| WARN("WHITESPACE_AFTER_LINE_CONTINUATION", |
| "Whitepspace after \\ makes next lines useless\n" . $herecurr); |
| } |
| |
| #warn if <asm/foo.h> is #included and <linux/foo.h> is available (uses RAW line) |
| if ($tree && $rawline =~ m{^.\s*\#\s*include\s*\<asm\/(.*)\.h\>}) { |
| my $file = "$1.h"; |
| my $checkfile = "include/linux/$file"; |
| if (-f "$root/$checkfile" && |
| $realfile ne $checkfile && |
| $1 !~ /$allowed_asm_includes/) |
| { |
| if ($realfile =~ m{^arch/}) { |
| CHK("ARCH_INCLUDE_LINUX", |
| "Consider using #include <linux/$file> instead of <asm/$file>\n" . $herecurr); |
| } else { |
| WARN("INCLUDE_LINUX", |
| "Use #include <linux/$file> instead of <asm/$file>\n" . $herecurr); |
| } |
| } |
| } |
| |
| # multi-statement macros should be enclosed in a do while loop, grab the |
| # first statement and ensure its the whole macro if its not enclosed |
| # in a known good container |
| if ($realfile !~ m@/vmlinux.lds.h$@ && |
| $line =~ /^.\s*\#\s*define\s*$Ident(\()?/) { |
| my $ln = $linenr; |
| my $cnt = $realcnt; |
| my ($off, $dstat, $dcond, $rest); |
| my $ctx = ''; |
| ($dstat, $dcond, $ln, $cnt, $off) = |
| ctx_statement_block($linenr, $realcnt, 0); |
| $ctx = $dstat; |
| #print "dstat<$dstat> dcond<$dcond> cnt<$cnt> off<$off>\n"; |
| #print "LINE<$lines[$ln-1]> len<" . length($lines[$ln-1]) . "\n"; |
| |
| $dstat =~ s/^.\s*\#\s*define\s+$Ident(?:\([^\)]*\))?\s*//; |
| $dstat =~ s/$;//g; |
| $dstat =~ s/\\\n.//g; |
| $dstat =~ s/^\s*//s; |
| $dstat =~ s/\s*$//s; |
| |
| # Flatten any parentheses and braces |
| while ($dstat =~ s/\([^\(\)]*\)/1/ || |
| $dstat =~ s/\{[^\{\}]*\}/1/ || |
| $dstat =~ s/\[[^\[\]]*\]/1/) |
| { |
| } |
| |
| # Flatten any obvious string concatentation. |
| while ($dstat =~ s/("X*")\s*$Ident/$1/ || |
| $dstat =~ s/$Ident\s*("X*")/$1/) |
| { |
| } |
| |
| my $exceptions = qr{ |
| $Declare| |
| module_param_named| |
| MODULE_PARM_DESC| |
| DECLARE_PER_CPU| |
| DEFINE_PER_CPU| |
| __typeof__\(| |
| union| |
| struct| |
| \.$Ident\s*=\s*| |
| ^\"|\"$ |
| }x; |
| #print "REST<$rest> dstat<$dstat> ctx<$ctx>\n"; |
| if ($dstat ne '' && |
| $dstat !~ /^(?:$Ident|-?$Constant),$/ && # 10, // foo(), |
| $dstat !~ /^(?:$Ident|-?$Constant);$/ && # foo(); |
| $dstat !~ /^[!~-]?(?:$Ident|$Constant)$/ && # 10 // foo() // !foo // ~foo // -foo |
| $dstat !~ /^'X'$/ && # character constants |
| $dstat !~ /$exceptions/ && |
| $dstat !~ /^\.$Ident\s*=/ && # .foo = |
| $dstat !~ /^(?:\#\s*$Ident|\#\s*$Constant)\s*$/ && # stringification #foo |
| $dstat !~ /^do\s*$Constant\s*while\s*$Constant;?$/ && # do {...} while (...); // do {...} while (...) |
| $dstat !~ /^for\s*$Constant$/ && # for (...) |
| $dstat !~ /^for\s*$Constant\s+(?:$Ident|-?$Constant)$/ && # for (...) bar() |
| $dstat !~ /^do\s*{/ && # do {... |
| $dstat !~ /^\({/) # ({... |
| { |
| $ctx =~ s/\n*$//; |
| my $herectx = $here . "\n"; |
| my $cnt = statement_rawlines($ctx); |
| |
| for (my $n = 0; $n < $cnt; $n++) { |
| $herectx .= raw_line($linenr, $n) . "\n"; |
| } |
| |
| if ($dstat =~ /;/) { |
| ERROR("MULTISTATEMENT_MACRO_USE_DO_WHILE", |
| "Macros with multiple statements should be enclosed in a do - while loop\n" . "$herectx"); |
| } else { |
| ERROR("COMPLEX_MACRO", |
| "Macros with complex values should be enclosed in parenthesis\n" . "$herectx"); |
| } |
| } |
| |
| # check for line continuations outside of #defines, preprocessor #, and asm |
| |
| } else { |
| if ($prevline !~ /^..*\\$/ && |
| $line !~ /^\+\s*\#.*\\$/ && # preprocessor |
| $line !~ /^\+.*\b(__asm__|asm)\b.*\\$/ && # asm |
| $line =~ /^\+.*\\$/) { |
| WARN("LINE_CONTINUATIONS", |
| "Avoid unnecessary line continuations\n" . $herecurr); |
| } |
| } |
| |
| # do {} while (0) macro tests: |
| # single-statement macros do not need to be enclosed in do while (0) loop, |
| # macro should not end with a semicolon |
| if ($^V && $^V ge 5.10.0 && |
| $realfile !~ m@/vmlinux.lds.h$@ && |
| $line =~ /^.\s*\#\s*define\s+$Ident(\()?/) { |
| my $ln = $linenr; |
| my $cnt = $realcnt; |
| my ($off, $dstat, $dcond, $rest); |
| my $ctx = ''; |
| ($dstat, $dcond, $ln, $cnt, $off) = |
| ctx_statement_block($linenr, $realcnt, 0); |
| $ctx = $dstat; |
| |
| $dstat =~ s/\\\n.//g; |
| |
| if ($dstat =~ /^\+\s*#\s*define\s+$Ident\s*${balanced_parens}\s*do\s*{(.*)\s*}\s*while\s*\(\s*0\s*\)\s*([;\s]*)\s*$/) { |
| my $stmts = $2; |
| my $semis = $3; |
| |
| $ctx =~ s/\n*$//; |
| my $cnt = statement_rawlines($ctx); |
| my $herectx = $here . "\n"; |
| |
| for (my $n = 0; $n < $cnt; $n++) { |
| $herectx .= raw_line($linenr, $n) . "\n"; |
| } |
| |
| if (($stmts =~ tr/;/;/) == 1 && |
| $stmts !~ /^\s*(if|while|for|switch)\b/) { |
| WARN("SINGLE_STATEMENT_DO_WHILE_MACRO", |
| "Single statement macros should not use a do {} while (0) loop\n" . "$herectx"); |
| } |
| if (defined $semis && $semis ne "") { |
| WARN("DO_WHILE_MACRO_WITH_TRAILING_SEMICOLON", |
| "do {} while (0) macros should not be semicolon terminated\n" . "$herectx"); |
| } |
| } |
| } |
| |
| # make sure symbols are always wrapped with VMLINUX_SYMBOL() ... |
| # all assignments may have only one of the following with an assignment: |
| # . |
| # ALIGN(...) |
| # VMLINUX_SYMBOL(...) |
| if ($realfile eq 'vmlinux.lds.h' && $line =~ /(?:(?:^|\s)$Ident\s*=|=\s*$Ident(?:\s|$))/) { |
| WARN("MISSING_VMLINUX_SYMBOL", |
| "vmlinux.lds.h needs VMLINUX_SYMBOL() around C-visible symbols\n" . $herecurr); |
| } |
| |
| # check for redundant bracing round if etc |
| if ($line =~ /(^.*)\bif\b/ && $1 !~ /else\s*$/) { |
| my ($level, $endln, @chunks) = |
| ctx_statement_full($linenr, $realcnt, 1); |
| #print "chunks<$#chunks> linenr<$linenr> endln<$endln> level<$level>\n"; |
| #print "APW: <<$chunks[1][0]>><<$chunks[1][1]>>\n"; |
| if ($#chunks > 0 && $level == 0) { |
| my @allowed = (); |
| my $allow = 0; |
| my $seen = 0; |
| my $herectx = $here . "\n"; |
| my $ln = $linenr - 1; |
| for my $chunk (@chunks) { |
| my ($cond, $block) = @{$chunk}; |
| |
| # If the condition carries leading newlines, then count those as offsets. |
| my ($whitespace) = ($cond =~ /^((?:\s*\n[+-])*\s*)/s); |
| my $offset = statement_rawlines($whitespace) - 1; |
| |
| $allowed[$allow] = 0; |
| #print "COND<$cond> whitespace<$whitespace> offset<$offset>\n"; |
| |
| # We have looked at and allowed this specific line. |
| $suppress_ifbraces{$ln + $offset} = 1; |
| |
| $herectx .= "$rawlines[$ln + $offset]\n[...]\n"; |
| $ln += statement_rawlines($block) - 1; |
| |
| substr($block, 0, length($cond), ''); |
| |
| $seen++ if ($block =~ /^\s*{/); |
| |
| #print "cond<$cond> block<$block> allowed<$allowed[$allow]>\n"; |
| if (statement_lines($cond) > 1) { |
| #print "APW: ALLOWED: cond<$cond>\n"; |
| $allowed[$allow] = 1; |
| } |
| if ($block =~/\b(?:if|for|while)\b/) { |
| #print "APW: ALLOWED: block<$block>\n"; |
| $allowed[$allow] = 1; |
| } |
| if (statement_block_size($block) > 1) { |
| #print "APW: ALLOWED: lines block<$block>\n"; |
| $allowed[$allow] = 1; |
| } |
| $allow++; |
| } |
| if ($seen) { |
| my $sum_allowed = 0; |
| foreach (@allowed) { |
| $sum_allowed += $_; |
| } |
| if ($sum_allowed == 0) { |
| WARN("BRACES", |
| "braces {} are not necessary for any arm of this statement\n" . $herectx); |
| } elsif ($sum_allowed != $allow && |
| $seen != $allow) { |
| CHK("BRACES", |
| "braces {} should be used on all arms of this statement\n" . $herectx); |
| } |
| } |
| } |
| } |
| if (!defined $suppress_ifbraces{$linenr - 1} && |
| $line =~ /\b(if|while|for|else)\b/) { |
| my $allowed = 0; |
| |
| # Check the pre-context. |
| if (substr($line, 0, $-[0]) =~ /(\}\s*)$/) { |
| #print "APW: ALLOWED: pre<$1>\n"; |
| $allowed = 1; |
| } |
| |
| my ($level, $endln, @chunks) = |
| ctx_statement_full($linenr, $realcnt, $-[0]); |
| |
| # Check the condition. |
| my ($cond, $block) = @{$chunks[0]}; |
| #print "CHECKING<$linenr> cond<$cond> block<$block>\n"; |
| if (defined $cond) { |
| substr($block, 0, length($cond), ''); |
| } |
| if (statement_lines($cond) > 1) { |
| #print "APW: ALLOWED: cond<$cond>\n"; |
| $allowed = 1; |
| } |
| if ($block =~/\b(?:if|for|while)\b/) { |
| #print "APW: ALLOWED: block<$block>\n"; |
| $allowed = 1; |
| } |
| if (statement_block_size($block) > 1) { |
| #print "APW: ALLOWED: lines block<$block>\n"; |
| $allowed = 1; |
| } |
| # Check the post-context. |
| if (defined $chunks[1]) { |
| my ($cond, $block) = @{$chunks[1]}; |
| if (defined $cond) { |
| substr($block, 0, length($cond), ''); |
| } |
| if ($block =~ /^\s*\{/) { |
| #print "APW: ALLOWED: chunk-1 block<$block>\n"; |
| $allowed = 1; |
| } |
| } |
| if ($level == 0 && $block =~ /^\s*\{/ && !$allowed) { |
| my $herectx = $here . "\n"; |
| my $cnt = statement_rawlines($block); |
| |
| for (my $n = 0; $n < $cnt; $n++) { |
| $herectx .= raw_line($linenr, $n) . "\n"; |
| } |
| |
| WARN("BRACES", |
| "braces {} are not necessary for single statement blocks\n" . $herectx); |
| } |
| } |
| |
| # check for unnecessary blank lines around braces |
| if (($line =~ /^..*}\s*$/ && $prevline =~ /^.\s*$/)) { |
| CHK("BRACES", |
| "Blank lines aren't necessary before a close brace '}'\n" . $hereprev); |
| } |
| if (($line =~ /^.\s*$/ && $prevline =~ /^..*{\s*$/)) { |
| CHK("BRACES", |
| "Blank lines aren't necessary after an open brace '{'\n" . $hereprev); |
| } |
| |
| # no volatiles please |
| my $asm_volatile = qr{\b(__asm__|asm)\s+(__volatile__|volatile)\b}; |
| if ($line =~ /\bvolatile\b/ && $line !~ /$asm_volatile/) { |
| WARN("VOLATILE", |
| "Use of volatile is usually wrong: see Documentation/volatile-considered-harmful.txt\n" . $herecurr); |
| } |
| |
| # warn about #if 0 |
| if ($line =~ /^.\s*\#\s*if\s+0\b/) { |
| CHK("REDUNDANT_CODE", |
| "if this code is redundant consider removing it\n" . |
| $herecurr); |
| } |
| |
| # check for needless "if (<foo>) fn(<foo>)" uses |
| if ($prevline =~ /\bif\s*\(\s*($Lval)\s*\)/) { |
| my $expr = '\s*\(\s*' . quotemeta($1) . '\s*\)\s*;'; |
| if ($line =~ /\b(kfree|usb_free_urb|debugfs_remove(?:_recursive)?)$expr/) { |
| WARN('NEEDLESS_IF', |
| "$1(NULL) is safe this check is probably not required\n" . $hereprev); |
| } |
| } |
| |
| # prefer usleep_range over udelay |
| if ($line =~ /\budelay\s*\(\s*(\d+)\s*\)/) { |
| # ignore udelay's < 10, however |
| if (! ($1 < 10) ) { |
| CHK("USLEEP_RANGE", |
| "usleep_range is preferred over udelay; see Documentation/timers/timers-howto.txt\n" . $line); |
| } |
| } |
| |
| # warn about unexpectedly long msleep's |
| if ($line =~ /\bmsleep\s*\((\d+)\);/) { |
| if ($1 < 20) { |
| WARN("MSLEEP", |
| "msleep < 20ms can sleep for up to 20ms; see Documentation/timers/timers-howto.txt\n" . $line); |
| } |
| } |
| |
| # warn about #ifdefs in C files |
| # if ($line =~ /^.\s*\#\s*if(|n)def/ && ($realfile =~ /\.c$/)) { |
| # print "#ifdef in C files should be avoided\n"; |
| # print "$herecurr"; |
| # $clean = 0; |
| # } |
| |
| # warn about spacing in #ifdefs |
| if ($line =~ /^.\s*\#\s*(ifdef|ifndef|elif)\s\s+/) { |
| ERROR("SPACING", |
| "exactly one space required after that #$1\n" . $herecurr); |
| } |
| |
| # check for spinlock_t definitions without a comment. |
| if ($line =~ /^.\s*(struct\s+mutex|spinlock_t)\s+\S+;/ || |
| $line =~ /^.\s*(DEFINE_MUTEX)\s*\(/) { |
| my $which = $1; |
| if (!ctx_has_comment($first_line, $linenr)) { |
| CHK("UNCOMMENTED_DEFINITION", |
| "$1 definition without comment\n" . $herecurr); |
| } |
| } |
| # check for memory barriers without a comment. |
| if ($line =~ /\b(mb|rmb|wmb|read_barrier_depends|smp_mb|smp_rmb|smp_wmb|smp_read_barrier_depends)\(/) { |
| if (!ctx_has_comment($first_line, $linenr)) { |
| CHK("MEMORY_BARRIER", |
| "memory barrier without comment\n" . $herecurr); |
| } |
| } |
| # check of hardware specific defines |
| if ($line =~ m@^.\s*\#\s*if.*\b(__i386__|__powerpc64__|__sun__|__s390x__)\b@ && $realfile !~ m@include/asm-@) { |
| CHK("ARCH_DEFINES", |
| "architecture specific defines should be avoided\n" . $herecurr); |
| } |
| |
| # Check that the storage class is at the beginning of a declaration |
| if ($line =~ /\b$Storage\b/ && $line !~ /^.\s*$Storage\b/) { |
| WARN("STORAGE_CLASS", |
| "storage class should be at the beginning of the declaration\n" . $herecurr) |
| } |
| |
| # check the location of the inline attribute, that it is between |
| # storage class and type. |
| if ($line =~ /\b$Type\s+$Inline\b/ || |
| $line =~ /\b$Inline\s+$Storage\b/) { |
| ERROR("INLINE_LOCATION", |
| "inline keyword should sit between storage class and type\n" . $herecurr); |
| } |
| |
| # Check for __inline__ and __inline, prefer inline |
| if ($line =~ /\b(__inline__|__inline)\b/) { |
| WARN("INLINE", |
| "plain inline is preferred over $1\n" . $herecurr); |
| } |
| |
| # Check for __attribute__ packed, prefer __packed |
| if ($line =~ /\b__attribute__\s*\(\s*\(.*\bpacked\b/) { |
| WARN("PREFER_PACKED", |
| "__packed is preferred over __attribute__((packed))\n" . $herecurr); |
| } |
| |
| # Check for __attribute__ aligned, prefer __aligned |
| if ($line =~ /\b__attribute__\s*\(\s*\(.*aligned/) { |
| WARN("PREFER_ALIGNED", |
| "__aligned(size) is preferred over __attribute__((aligned(size)))\n" . $herecurr); |
| } |
| |
| # Check for __attribute__ format(printf, prefer __printf |
| if ($line =~ /\b__attribute__\s*\(\s*\(\s*format\s*\(\s*printf/) { |
| WARN("PREFER_PRINTF", |
| "__printf(string-index, first-to-check) is preferred over __attribute__((format(printf, string-index, first-to-check)))\n" . $herecurr); |
| } |
| |
| # Check for __attribute__ format(scanf, prefer __scanf |
| if ($line =~ /\b__attribute__\s*\(\s*\(\s*format\s*\(\s*scanf\b/) { |
| WARN("PREFER_SCANF", |
| "__scanf(string-index, first-to-check) is preferred over __attribute__((format(scanf, string-index, first-to-check)))\n" . $herecurr); |
| } |
| |
| # check for sizeof(&) |
| if ($line =~ /\bsizeof\s*\(\s*\&/) { |
| WARN("SIZEOF_ADDRESS", |
| "sizeof(& should be avoided\n" . $herecurr); |
| } |
| |
| # check for sizeof without parenthesis |
| if ($line =~ /\bsizeof\s+((?:\*\s*|)$Lval|$Type(?:\s+$Lval|))/) { |
| WARN("SIZEOF_PARENTHESIS", |
| "sizeof $1 should be sizeof($1)\n" . $herecurr); |
| } |
| |
| # check for line continuations in quoted strings with odd counts of " |
| if ($rawline =~ /\\$/ && $rawline =~ tr/"/"/ % 2) { |
| WARN("LINE_CONTINUATIONS", |
| "Avoid line continuations in quoted strings\n" . $herecurr); |
| } |
| |
| # check for struct spinlock declarations |
| if ($line =~ /^.\s*\bstruct\s+spinlock\s+\w+\s*;/) { |
| WARN("USE_SPINLOCK_T", |
| "struct spinlock should be spinlock_t\n" . $herecurr); |
| } |
| |
| # Check for misused memsets |
| if ($^V && $^V ge 5.10.0 && |
| defined $stat && |
| $stat =~ /^\+(?:.*?)\bmemset\s*\(\s*$FuncArg\s*,\s*$FuncArg\s*\,\s*$FuncArg\s*\)/s) { |
| |
| my $ms_addr = $2; |
| my $ms_val = $7; |
| my $ms_size = $12; |
| |
| if ($ms_size =~ /^(0x|)0$/i) { |
| ERROR("MEMSET", |
| "memset to 0's uses 0 as the 2nd argument, not the 3rd\n" . "$here\n$stat\n"); |
| } elsif ($ms_size =~ /^(0x|)1$/i) { |
| WARN("MEMSET", |
| "single byte memset is suspicious. Swapped 2nd/3rd argument?\n" . "$here\n$stat\n"); |
| } |
| } |
| |
| # typecasts on min/max could be min_t/max_t |
| if ($^V && $^V ge 5.10.0 && |
| defined $stat && |
| $stat =~ /^\+(?:.*?)\b(min|max)\s*\(\s*$FuncArg\s*,\s*$FuncArg\s*\)/) { |
| if (defined $2 || defined $7) { |
| my $call = $1; |
| my $cast1 = deparenthesize($2); |
| my $arg1 = $3; |
| my $cast2 = deparenthesize($7); |
| my $arg2 = $8; |
| my $cast; |
| |
| if ($cast1 ne "" && $cast2 ne "" && $cast1 ne $cast2) { |
| $cast = "$cast1 or $cast2"; |
| } elsif ($cast1 ne "") { |
| $cast = $cast1; |
| } else { |
| $cast = $cast2; |
| } |
| WARN("MINMAX", |
| "$call() should probably be ${call}_t($cast, $arg1, $arg2)\n" . "$here\n$stat\n"); |
| } |
| } |
| |
| # check usleep_range arguments |
| if ($^V && $^V ge 5.10.0 && |
| defined $stat && |
| $stat =~ /^\+(?:.*?)\busleep_range\s*\(\s*($FuncArg)\s*,\s*($FuncArg)\s*\)/) { |
| my $min = $1; |
| my $max = $7; |
| if ($min eq $max) { |
| WARN("USLEEP_RANGE", |
| "usleep_range should not use min == max args; see Documentation/timers/timers-howto.txt\n" . "$here\n$stat\n"); |
| } elsif ($min =~ /^\d+$/ && $max =~ /^\d+$/ && |
| $min > $max) { |
| WARN("USLEEP_RANGE", |
| "usleep_range args reversed, use min then max; see Documentation/timers/timers-howto.txt\n" . "$here\n$stat\n"); |
| } |
| } |
| |
| # check for new externs in .c files. |
| if ($realfile =~ /\.c$/ && defined $stat && |
| $stat =~ /^.\s*(?:extern\s+)?$Type\s+($Ident)(\s*)\(/s) |
| { |
| my $function_name = $1; |
| my $paren_space = $2; |
| |
| my $s = $stat; |
| if (defined $cond) { |
| substr($s, 0, length($cond), ''); |
| } |
| if ($s =~ /^\s*;/ && |
| $function_name ne 'uninitialized_var') |
| { |
| WARN("AVOID_EXTERNS", |
| "externs should be avoided in .c files\n" . $herecurr); |
| } |
| |
| if ($paren_space =~ /\n/) { |
| WARN("FUNCTION_ARGUMENTS", |
| "arguments for function declarations should follow identifier\n" . $herecurr); |
| } |
| |
| } elsif ($realfile =~ /\.c$/ && defined $stat && |
| $stat =~ /^.\s*extern\s+/) |
| { |
| WARN("AVOID_EXTERNS", |
| "externs should be avoided in .c files\n" . $herecurr); |
| } |
| |
| # checks for new __setup's |
| if ($rawline =~ /\b__setup\("([^"]*)"/) { |
| my $name = $1; |
| |
| if (!grep(/$name/, @setup_docs)) { |
| CHK("UNDOCUMENTED_SETUP", |
| "__setup appears un-documented -- check Documentation/kernel-parameters.txt\n" . $herecurr); |
| } |
| } |
| |
| # check for pointless casting of kmalloc return |
| if ($line =~ /\*\s*\)\s*[kv][czm]alloc(_node){0,1}\b/) { |
| WARN("UNNECESSARY_CASTS", |
| "unnecessary cast may hide bugs, see http://c-faq.com/malloc/mallocnocast.html\n" . $herecurr); |
| } |
| |
| # check for krealloc arg reuse |
| if ($^V && $^V ge 5.10.0 && |
| $line =~ /\b($Lval)\s*\=\s*(?:$balanced_parens)?\s*krealloc\s*\(\s*\1\s*,/) { |
| WARN("KREALLOC_ARG_REUSE", |
| "Reusing the krealloc arg is almost always a bug\n" . $herecurr); |
| } |
| |
| # check for alloc argument mismatch |
| if ($line =~ /\b(kcalloc|kmalloc_array)\s*\(\s*sizeof\b/) { |
| WARN("ALLOC_ARRAY_ARGS", |
| "$1 uses number as first arg, sizeof is generally wrong\n" . $herecurr); |
| } |
| |
| # check for multiple semicolons |
| if ($line =~ /;\s*;\s*$/) { |
| WARN("ONE_SEMICOLON", |
| "Statements terminations use 1 semicolon\n" . $herecurr); |
| } |
| |
| # check for switch/default statements without a break; |
| if ($^V && $^V ge 5.10.0 && |
| defined $stat && |
| $stat =~ /^\+[$;\s]*(?:case[$;\s]+\w+[$;\s]*:[$;\s]*|)*[$;\s]*\bdefault[$;\s]*:[$;\s]*;/g) { |
| my $ctx = ''; |
| my $herectx = $here . "\n"; |
| my $cnt = statement_rawlines($stat); |
| for (my $n = 0; $n < $cnt; $n++) { |
| $herectx .= raw_line($linenr, $n) . "\n"; |
| } |
| WARN("DEFAULT_NO_BREAK", |
| "switch default: should use break\n" . $herectx); |
| } |
| |
| # check for gcc specific __FUNCTION__ |
| if ($line =~ /__FUNCTION__/) { |
| WARN("USE_FUNC", |
| "__func__ should be used instead of gcc specific __FUNCTION__\n" . $herecurr); |
| } |
| |
| # check for use of yield() |
| if ($line =~ /\byield\s*\(\s*\)/) { |
| WARN("YIELD", |
| "Using yield() is generally wrong. See yield() kernel-doc (sched/core.c)\n" . $herecurr); |
| } |
| |
| # check for semaphores initialized locked |
| if ($line =~ /^.\s*sema_init.+,\W?0\W?\)/) { |
| WARN("CONSIDER_COMPLETION", |
| "consider using a completion\n" . $herecurr); |
| } |
| |
| # recommend kstrto* over simple_strto* and strict_strto* |
| if ($line =~ /\b((simple|strict)_(strto(l|ll|ul|ull)))\s*\(/) { |
| WARN("CONSIDER_KSTRTO", |
| "$1 is obsolete, use k$3 instead\n" . $herecurr); |
| } |
| |
| # check for __initcall(), use device_initcall() explicitly please |
| if ($line =~ /^.\s*__initcall\s*\(/) { |
| WARN("USE_DEVICE_INITCALL", |
| "please use device_initcall() instead of __initcall()\n" . $herecurr); |
| } |
| |
| # check for various ops structs, ensure they are const. |
| my $struct_ops = qr{acpi_dock_ops| |
| address_space_operations| |
| backlight_ops| |
| block_device_operations| |
| dentry_operations| |
| dev_pm_ops| |
| dma_map_ops| |
| extent_io_ops| |
| file_lock_operations| |
| file_operations| |
| hv_ops| |
| ide_dma_ops| |
| intel_dvo_dev_ops| |
| item_operations| |
| iwl_ops| |
| kgdb_arch| |
| kgdb_io| |
| kset_uevent_ops| |
| lock_manager_operations| |
| microcode_ops| |
| mtrr_ops| |
| neigh_ops| |
| nlmsvc_binding| |
| pci_raw_ops| |
| pipe_buf_operations| |
| platform_hibernation_ops| |
| platform_suspend_ops| |
| proto_ops| |
| rpc_pipe_ops| |
| seq_operations| |
| snd_ac97_build_ops| |
| soc_pcmcia_socket_ops| |
| stacktrace_ops| |
| sysfs_ops| |
| tty_operations| |
| usb_mon_operations| |
| wd_ops}x; |
| if ($line !~ /\bconst\b/ && |
| $line =~ /\bstruct\s+($struct_ops)\b/) { |
| WARN("CONST_STRUCT", |
| "struct $1 should normally be const\n" . |
| $herecurr); |
| } |
| |
| # use of NR_CPUS is usually wrong |
| # ignore definitions of NR_CPUS and usage to define arrays as likely right |
| if ($line =~ /\bNR_CPUS\b/ && |
| $line !~ /^.\s*\s*#\s*if\b.*\bNR_CPUS\b/ && |
| $line !~ /^.\s*\s*#\s*define\b.*\bNR_CPUS\b/ && |
| $line !~ /^.\s*$Declare\s.*\[[^\]]*NR_CPUS[^\]]*\]/ && |
| $line !~ /\[[^\]]*\.\.\.[^\]]*NR_CPUS[^\]]*\]/ && |
| $line !~ /\[[^\]]*NR_CPUS[^\]]*\.\.\.[^\]]*\]/) |
| { |
| WARN("NR_CPUS", |
| "usage of NR_CPUS is often wrong - consider using cpu_possible(), num_possible_cpus(), for_each_possible_cpu(), etc\n" . $herecurr); |
| } |
| |
| # check for %L{u,d,i} in strings |
| my $string; |
| while ($line =~ /(?:^|")([X\t]*)(?:"|$)/g) { |
| $string = substr($rawline, $-[1], $+[1] - $-[1]); |
| $string =~ s/%%/__/g; |
| if ($string =~ /(?<!%)%L[udi]/) { |
| WARN("PRINTF_L", |
| "\%Ld/%Lu are not-standard C, use %lld/%llu\n" . $herecurr); |
| last; |
| } |
| } |
| |
| # whine mightly about in_atomic |
| if ($line =~ /\bin_atomic\s*\(/) { |
| if ($realfile =~ m@^drivers/@) { |
| ERROR("IN_ATOMIC", |
| "do not use in_atomic in drivers\n" . $herecurr); |
| } elsif ($realfile !~ m@^kernel/@) { |
| WARN("IN_ATOMIC", |
| "use of in_atomic() is incorrect outside core kernel code\n" . $herecurr); |
| } |
| } |
| |
| # check for lockdep_set_novalidate_class |
| if ($line =~ /^.\s*lockdep_set_novalidate_class\s*\(/ || |
| $line =~ /__lockdep_no_validate__\s*\)/ ) { |
| if ($realfile !~ m@^kernel/lockdep@ && |
| $realfile !~ m@^include/linux/lockdep@ && |
| $realfile !~ m@^drivers/base/core@) { |
| ERROR("LOCKDEP", |
| "lockdep_no_validate class is reserved for device->mutex.\n" . $herecurr); |
| } |
| } |
| |
| if ($line =~ /debugfs_create_file.*S_IWUGO/ || |
| $line =~ /DEVICE_ATTR.*S_IWUGO/ ) { |
| WARN("EXPORTED_WORLD_WRITABLE", |
| "Exporting world writable files is usually an error. Consider more restrictive permissions.\n" . $herecurr); |
| } |
| } |
| |
| # If we have no input at all, then there is nothing to report on |
| # so just keep quiet. |
| if ($#rawlines == -1) { |
| exit(0); |
| } |
| |
| # In mailback mode only produce a report in the negative, for |
| # things that appear to be patches. |
| if ($mailback && ($clean == 1 || !$is_patch)) { |
| exit(0); |
| } |
| |
| # This is not a patch, and we are are in 'no-patch' mode so |
| # just keep quiet. |
| if (!$chk_patch && !$is_patch) { |
| exit(0); |
| } |
| |
| if (!$is_patch) { |
| ERROR("NOT_UNIFIED_DIFF", |
| "Does not appear to be a unified-diff format patch\n"); |
| } |
| if ($is_patch && $chk_signoff && $signoff == 0) { |
| ERROR("MISSING_SIGN_OFF", |
| "Missing Signed-off-by: line(s)\n"); |
| } |
| |
| print report_dump(); |
| if ($summary && !($clean == 1 && $quiet == 1)) { |
| print "$filename " if ($summary_file); |
| print "total: $cnt_error errors, $cnt_warn warnings, " . |
| (($check)? "$cnt_chk checks, " : "") . |
| "$cnt_lines lines checked\n"; |
| print "\n" if ($quiet == 0); |
| } |
| |
| if ($quiet == 0) { |
| |
| if ($^V lt 5.10.0) { |
| print("NOTE: perl $^V is not modern enough to detect all possible issues.\n"); |
| print("An upgrade to at least perl v5.10.0 is suggested.\n\n"); |
| } |
| |
| # If there were whitespace errors which cleanpatch can fix |
| # then suggest that. |
| if ($rpt_cleaners) { |
| print "NOTE: whitespace errors detected, you may wish to use scripts/cleanpatch or\n"; |
| print " scripts/cleanfile\n\n"; |
| $rpt_cleaners = 0; |
| } |
| } |
| |
| if ($quiet == 0 && keys %ignore_type) { |
| print "NOTE: Ignored message types:"; |
| foreach my $ignore (sort keys %ignore_type) { |
| print " $ignore"; |
| } |
| print "\n\n"; |
| } |
| |
| if ($clean == 1 && $quiet == 0) { |
| print "$vname has no obvious style problems and is ready for submission.\n" |
| } |
| if ($clean == 0 && $quiet == 0) { |
| print << "EOM"; |
| $vname has style problems, please review. |
| |
| If any of these errors are false positives, please report |
| them to the maintainer, see CHECKPATCH in MAINTAINERS. |
| EOM |
| } |
| |
| return $clean; |
| } |