| /* |
| * Copyright 2008-2009 Analog Devices Inc. |
| * |
| * Licensed under the ADI BSD license or the GPL-2 (or later) |
| */ |
| |
| #ifndef _DEF_BF518_H |
| #define _DEF_BF518_H |
| |
| /* Include all Core registers and bit definitions */ |
| #include <asm/def_LPBlackfin.h> |
| |
| /* SYSTEM & MMR ADDRESS DEFINITIONS FOR ADSP-BF518 */ |
| |
| /* Include defBF51x_base.h for the set of #defines that are common to all ADSP-BF51x processors */ |
| #include "defBF51x_base.h" |
| |
| /* The following are the #defines needed by ADSP-BF518 that are not in the common header */ |
| /* 10/100 Ethernet Controller (0xFFC03000 - 0xFFC031FF) */ |
| |
| #define EMAC_OPMODE 0xFFC03000 /* Operating Mode Register */ |
| #define EMAC_ADDRLO 0xFFC03004 /* Address Low (32 LSBs) Register */ |
| #define EMAC_ADDRHI 0xFFC03008 /* Address High (16 MSBs) Register */ |
| #define EMAC_HASHLO 0xFFC0300C /* Multicast Hash Table Low (Bins 31-0) Register */ |
| #define EMAC_HASHHI 0xFFC03010 /* Multicast Hash Table High (Bins 63-32) Register */ |
| #define EMAC_STAADD 0xFFC03014 /* Station Management Address Register */ |
| #define EMAC_STADAT 0xFFC03018 /* Station Management Data Register */ |
| #define EMAC_FLC 0xFFC0301C /* Flow Control Register */ |
| #define EMAC_VLAN1 0xFFC03020 /* VLAN1 Tag Register */ |
| #define EMAC_VLAN2 0xFFC03024 /* VLAN2 Tag Register */ |
| #define EMAC_WKUP_CTL 0xFFC0302C /* Wake-Up Control/Status Register */ |
| #define EMAC_WKUP_FFMSK0 0xFFC03030 /* Wake-Up Frame Filter 0 Byte Mask Register */ |
| #define EMAC_WKUP_FFMSK1 0xFFC03034 /* Wake-Up Frame Filter 1 Byte Mask Register */ |
| #define EMAC_WKUP_FFMSK2 0xFFC03038 /* Wake-Up Frame Filter 2 Byte Mask Register */ |
| #define EMAC_WKUP_FFMSK3 0xFFC0303C /* Wake-Up Frame Filter 3 Byte Mask Register */ |
| #define EMAC_WKUP_FFCMD 0xFFC03040 /* Wake-Up Frame Filter Commands Register */ |
| #define EMAC_WKUP_FFOFF 0xFFC03044 /* Wake-Up Frame Filter Offsets Register */ |
| #define EMAC_WKUP_FFCRC0 0xFFC03048 /* Wake-Up Frame Filter 0,1 CRC-16 Register */ |
| #define EMAC_WKUP_FFCRC1 0xFFC0304C /* Wake-Up Frame Filter 2,3 CRC-16 Register */ |
| |
| #define EMAC_SYSCTL 0xFFC03060 /* EMAC System Control Register */ |
| #define EMAC_SYSTAT 0xFFC03064 /* EMAC System Status Register */ |
| #define EMAC_RX_STAT 0xFFC03068 /* RX Current Frame Status Register */ |
| #define EMAC_RX_STKY 0xFFC0306C /* RX Sticky Frame Status Register */ |
| #define EMAC_RX_IRQE 0xFFC03070 /* RX Frame Status Interrupt Enables Register */ |
| #define EMAC_TX_STAT 0xFFC03074 /* TX Current Frame Status Register */ |
| #define EMAC_TX_STKY 0xFFC03078 /* TX Sticky Frame Status Register */ |
| #define EMAC_TX_IRQE 0xFFC0307C /* TX Frame Status Interrupt Enables Register */ |
| |
| #define EMAC_MMC_CTL 0xFFC03080 /* MMC Counter Control Register */ |
| #define EMAC_MMC_RIRQS 0xFFC03084 /* MMC RX Interrupt Status Register */ |
| #define EMAC_MMC_RIRQE 0xFFC03088 /* MMC RX Interrupt Enables Register */ |
| #define EMAC_MMC_TIRQS 0xFFC0308C /* MMC TX Interrupt Status Register */ |
| #define EMAC_MMC_TIRQE 0xFFC03090 /* MMC TX Interrupt Enables Register */ |
| |
| #define EMAC_RXC_OK 0xFFC03100 /* RX Frame Successful Count */ |
| #define EMAC_RXC_FCS 0xFFC03104 /* RX Frame FCS Failure Count */ |
| #define EMAC_RXC_ALIGN 0xFFC03108 /* RX Alignment Error Count */ |
| #define EMAC_RXC_OCTET 0xFFC0310C /* RX Octets Successfully Received Count */ |
| #define EMAC_RXC_DMAOVF 0xFFC03110 /* Internal MAC Sublayer Error RX Frame Count */ |
| #define EMAC_RXC_UNICST 0xFFC03114 /* Unicast RX Frame Count */ |
| #define EMAC_RXC_MULTI 0xFFC03118 /* Multicast RX Frame Count */ |
| #define EMAC_RXC_BROAD 0xFFC0311C /* Broadcast RX Frame Count */ |
| #define EMAC_RXC_LNERRI 0xFFC03120 /* RX Frame In Range Error Count */ |
| #define EMAC_RXC_LNERRO 0xFFC03124 /* RX Frame Out Of Range Error Count */ |
| #define EMAC_RXC_LONG 0xFFC03128 /* RX Frame Too Long Count */ |
| #define EMAC_RXC_MACCTL 0xFFC0312C /* MAC Control RX Frame Count */ |
| #define EMAC_RXC_OPCODE 0xFFC03130 /* Unsupported Op-Code RX Frame Count */ |
| #define EMAC_RXC_PAUSE 0xFFC03134 /* MAC Control Pause RX Frame Count */ |
| #define EMAC_RXC_ALLFRM 0xFFC03138 /* Overall RX Frame Count */ |
| #define EMAC_RXC_ALLOCT 0xFFC0313C /* Overall RX Octet Count */ |
| #define EMAC_RXC_TYPED 0xFFC03140 /* Type/Length Consistent RX Frame Count */ |
| #define EMAC_RXC_SHORT 0xFFC03144 /* RX Frame Fragment Count - Byte Count x < 64 */ |
| #define EMAC_RXC_EQ64 0xFFC03148 /* Good RX Frame Count - Byte Count x = 64 */ |
| #define EMAC_RXC_LT128 0xFFC0314C /* Good RX Frame Count - Byte Count 64 < x < 128 */ |
| #define EMAC_RXC_LT256 0xFFC03150 /* Good RX Frame Count - Byte Count 128 <= x < 256 */ |
| #define EMAC_RXC_LT512 0xFFC03154 /* Good RX Frame Count - Byte Count 256 <= x < 512 */ |
| #define EMAC_RXC_LT1024 0xFFC03158 /* Good RX Frame Count - Byte Count 512 <= x < 1024 */ |
| #define EMAC_RXC_GE1024 0xFFC0315C /* Good RX Frame Count - Byte Count x >= 1024 */ |
| |
| #define EMAC_TXC_OK 0xFFC03180 /* TX Frame Successful Count */ |
| #define EMAC_TXC_1COL 0xFFC03184 /* TX Frames Successful After Single Collision Count */ |
| #define EMAC_TXC_GT1COL 0xFFC03188 /* TX Frames Successful After Multiple Collisions Count */ |
| #define EMAC_TXC_OCTET 0xFFC0318C /* TX Octets Successfully Received Count */ |
| #define EMAC_TXC_DEFER 0xFFC03190 /* TX Frame Delayed Due To Busy Count */ |
| #define EMAC_TXC_LATECL 0xFFC03194 /* Late TX Collisions Count */ |
| #define EMAC_TXC_XS_COL 0xFFC03198 /* TX Frame Failed Due To Excessive Collisions Count */ |
| #define EMAC_TXC_DMAUND 0xFFC0319C /* Internal MAC Sublayer Error TX Frame Count */ |
| #define EMAC_TXC_CRSERR 0xFFC031A0 /* Carrier Sense Deasserted During TX Frame Count */ |
| #define EMAC_TXC_UNICST 0xFFC031A4 /* Unicast TX Frame Count */ |
| #define EMAC_TXC_MULTI 0xFFC031A8 /* Multicast TX Frame Count */ |
| #define EMAC_TXC_BROAD 0xFFC031AC /* Broadcast TX Frame Count */ |
| #define EMAC_TXC_XS_DFR 0xFFC031B0 /* TX Frames With Excessive Deferral Count */ |
| #define EMAC_TXC_MACCTL 0xFFC031B4 /* MAC Control TX Frame Count */ |
| #define EMAC_TXC_ALLFRM 0xFFC031B8 /* Overall TX Frame Count */ |
| #define EMAC_TXC_ALLOCT 0xFFC031BC /* Overall TX Octet Count */ |
| #define EMAC_TXC_EQ64 0xFFC031C0 /* Good TX Frame Count - Byte Count x = 64 */ |
| #define EMAC_TXC_LT128 0xFFC031C4 /* Good TX Frame Count - Byte Count 64 < x < 128 */ |
| #define EMAC_TXC_LT256 0xFFC031C8 /* Good TX Frame Count - Byte Count 128 <= x < 256 */ |
| #define EMAC_TXC_LT512 0xFFC031CC /* Good TX Frame Count - Byte Count 256 <= x < 512 */ |
| #define EMAC_TXC_LT1024 0xFFC031D0 /* Good TX Frame Count - Byte Count 512 <= x < 1024 */ |
| #define EMAC_TXC_GE1024 0xFFC031D4 /* Good TX Frame Count - Byte Count x >= 1024 */ |
| #define EMAC_TXC_ABORT 0xFFC031D8 /* Total TX Frames Aborted Count */ |
| |
| /* Listing for IEEE-Supported Count Registers */ |
| |
| #define FramesReceivedOK EMAC_RXC_OK /* RX Frame Successful Count */ |
| #define FrameCheckSequenceErrors EMAC_RXC_FCS /* RX Frame FCS Failure Count */ |
| #define AlignmentErrors EMAC_RXC_ALIGN /* RX Alignment Error Count */ |
| #define OctetsReceivedOK EMAC_RXC_OCTET /* RX Octets Successfully Received Count */ |
| #define FramesLostDueToIntMACRcvError EMAC_RXC_DMAOVF /* Internal MAC Sublayer Error RX Frame Count */ |
| #define UnicastFramesReceivedOK EMAC_RXC_UNICST /* Unicast RX Frame Count */ |
| #define MulticastFramesReceivedOK EMAC_RXC_MULTI /* Multicast RX Frame Count */ |
| #define BroadcastFramesReceivedOK EMAC_RXC_BROAD /* Broadcast RX Frame Count */ |
| #define InRangeLengthErrors EMAC_RXC_LNERRI /* RX Frame In Range Error Count */ |
| #define OutOfRangeLengthField EMAC_RXC_LNERRO /* RX Frame Out Of Range Error Count */ |
| #define FrameTooLongErrors EMAC_RXC_LONG /* RX Frame Too Long Count */ |
| #define MACControlFramesReceived EMAC_RXC_MACCTL /* MAC Control RX Frame Count */ |
| #define UnsupportedOpcodesReceived EMAC_RXC_OPCODE /* Unsupported Op-Code RX Frame Count */ |
| #define PAUSEMACCtrlFramesReceived EMAC_RXC_PAUSE /* MAC Control Pause RX Frame Count */ |
| #define FramesReceivedAll EMAC_RXC_ALLFRM /* Overall RX Frame Count */ |
| #define OctetsReceivedAll EMAC_RXC_ALLOCT /* Overall RX Octet Count */ |
| #define TypedFramesReceived EMAC_RXC_TYPED /* Type/Length Consistent RX Frame Count */ |
| #define FramesLenLt64Received EMAC_RXC_SHORT /* RX Frame Fragment Count - Byte Count x < 64 */ |
| #define FramesLenEq64Received EMAC_RXC_EQ64 /* Good RX Frame Count - Byte Count x = 64 */ |
| #define FramesLen65_127Received EMAC_RXC_LT128 /* Good RX Frame Count - Byte Count 64 < x < 128 */ |
| #define FramesLen128_255Received EMAC_RXC_LT256 /* Good RX Frame Count - Byte Count 128 <= x < 256 */ |
| #define FramesLen256_511Received EMAC_RXC_LT512 /* Good RX Frame Count - Byte Count 256 <= x < 512 */ |
| #define FramesLen512_1023Received EMAC_RXC_LT1024 /* Good RX Frame Count - Byte Count 512 <= x < 1024 */ |
| #define FramesLen1024_MaxReceived EMAC_RXC_GE1024 /* Good RX Frame Count - Byte Count x >= 1024 */ |
| |
| #define FramesTransmittedOK EMAC_TXC_OK /* TX Frame Successful Count */ |
| #define SingleCollisionFrames EMAC_TXC_1COL /* TX Frames Successful After Single Collision Count */ |
| #define MultipleCollisionFrames EMAC_TXC_GT1COL /* TX Frames Successful After Multiple Collisions Count */ |
| #define OctetsTransmittedOK EMAC_TXC_OCTET /* TX Octets Successfully Received Count */ |
| #define FramesWithDeferredXmissions EMAC_TXC_DEFER /* TX Frame Delayed Due To Busy Count */ |
| #define LateCollisions EMAC_TXC_LATECL /* Late TX Collisions Count */ |
| #define FramesAbortedDueToXSColls EMAC_TXC_XS_COL /* TX Frame Failed Due To Excessive Collisions Count */ |
| #define FramesLostDueToIntMacXmitError EMAC_TXC_DMAUND /* Internal MAC Sublayer Error TX Frame Count */ |
| #define CarrierSenseErrors EMAC_TXC_CRSERR /* Carrier Sense Deasserted During TX Frame Count */ |
| #define UnicastFramesXmittedOK EMAC_TXC_UNICST /* Unicast TX Frame Count */ |
| #define MulticastFramesXmittedOK EMAC_TXC_MULTI /* Multicast TX Frame Count */ |
| #define BroadcastFramesXmittedOK EMAC_TXC_BROAD /* Broadcast TX Frame Count */ |
| #define FramesWithExcessiveDeferral EMAC_TXC_XS_DFR /* TX Frames With Excessive Deferral Count */ |
| #define MACControlFramesTransmitted EMAC_TXC_MACCTL /* MAC Control TX Frame Count */ |
| #define FramesTransmittedAll EMAC_TXC_ALLFRM /* Overall TX Frame Count */ |
| #define OctetsTransmittedAll EMAC_TXC_ALLOCT /* Overall TX Octet Count */ |
| #define FramesLenEq64Transmitted EMAC_TXC_EQ64 /* Good TX Frame Count - Byte Count x = 64 */ |
| #define FramesLen65_127Transmitted EMAC_TXC_LT128 /* Good TX Frame Count - Byte Count 64 < x < 128 */ |
| #define FramesLen128_255Transmitted EMAC_TXC_LT256 /* Good TX Frame Count - Byte Count 128 <= x < 256 */ |
| #define FramesLen256_511Transmitted EMAC_TXC_LT512 /* Good TX Frame Count - Byte Count 256 <= x < 512 */ |
| #define FramesLen512_1023Transmitted EMAC_TXC_LT1024 /* Good TX Frame Count - Byte Count 512 <= x < 1024 */ |
| #define FramesLen1024_MaxTransmitted EMAC_TXC_GE1024 /* Good TX Frame Count - Byte Count x >= 1024 */ |
| #define TxAbortedFrames EMAC_TXC_ABORT /* Total TX Frames Aborted Count */ |
| |
| /*********************************************************************************** |
| ** System MMR Register Bits And Macros |
| ** |
| ** Disclaimer: All macros are intended to make C and Assembly code more readable. |
| ** Use these macros carefully, as any that do left shifts for field |
| ** depositing will result in the lower order bits being destroyed. Any |
| ** macro that shifts left to properly position the bit-field should be |
| ** used as part of an OR to initialize a register and NOT as a dynamic |
| ** modifier UNLESS the lower order bits are saved and ORed back in when |
| ** the macro is used. |
| *************************************************************************************/ |
| |
| /************************ ETHERNET 10/100 CONTROLLER MASKS ************************/ |
| |
| /* EMAC_OPMODE Masks */ |
| |
| #define RE 0x00000001 /* Receiver Enable */ |
| #define ASTP 0x00000002 /* Enable Automatic Pad Stripping On RX Frames */ |
| #define HU 0x00000010 /* Hash Filter Unicast Address */ |
| #define HM 0x00000020 /* Hash Filter Multicast Address */ |
| #define PAM 0x00000040 /* Pass-All-Multicast Mode Enable */ |
| #define PR 0x00000080 /* Promiscuous Mode Enable */ |
| #define IFE 0x00000100 /* Inverse Filtering Enable */ |
| #define DBF 0x00000200 /* Disable Broadcast Frame Reception */ |
| #define PBF 0x00000400 /* Pass Bad Frames Enable */ |
| #define PSF 0x00000800 /* Pass Short Frames Enable */ |
| #define RAF 0x00001000 /* Receive-All Mode */ |
| #define TE 0x00010000 /* Transmitter Enable */ |
| #define DTXPAD 0x00020000 /* Disable Automatic TX Padding */ |
| #define DTXCRC 0x00040000 /* Disable Automatic TX CRC Generation */ |
| #define DC 0x00080000 /* Deferral Check */ |
| #define BOLMT 0x00300000 /* Back-Off Limit */ |
| #define BOLMT_10 0x00000000 /* 10-bit range */ |
| #define BOLMT_8 0x00100000 /* 8-bit range */ |
| #define BOLMT_4 0x00200000 /* 4-bit range */ |
| #define BOLMT_1 0x00300000 /* 1-bit range */ |
| #define DRTY 0x00400000 /* Disable TX Retry On Collision */ |
| #define LCTRE 0x00800000 /* Enable TX Retry On Late Collision */ |
| #define RMII 0x01000000 /* RMII/MII* Mode */ |
| #define RMII_10 0x02000000 /* Speed Select for RMII Port (10MBit/100MBit*) */ |
| #define FDMODE 0x04000000 /* Duplex Mode Enable (Full/Half*) */ |
| #define LB 0x08000000 /* Internal Loopback Enable */ |
| #define DRO 0x10000000 /* Disable Receive Own Frames (Half-Duplex Mode) */ |
| |
| /* EMAC_STAADD Masks */ |
| |
| #define STABUSY 0x00000001 /* Initiate Station Mgt Reg Access / STA Busy Stat */ |
| #define STAOP 0x00000002 /* Station Management Operation Code (Write/Read*) */ |
| #define STADISPRE 0x00000004 /* Disable Preamble Generation */ |
| #define STAIE 0x00000008 /* Station Mgt. Transfer Done Interrupt Enable */ |
| #define REGAD 0x000007C0 /* STA Register Address */ |
| #define PHYAD 0x0000F800 /* PHY Device Address */ |
| |
| #define SET_REGAD(x) (((x)&0x1F)<< 6 ) /* Set STA Register Address */ |
| #define SET_PHYAD(x) (((x)&0x1F)<< 11 ) /* Set PHY Device Address */ |
| |
| /* EMAC_STADAT Mask */ |
| |
| #define STADATA 0x0000FFFF /* Station Management Data */ |
| |
| /* EMAC_FLC Masks */ |
| |
| #define FLCBUSY 0x00000001 /* Send Flow Ctrl Frame / Flow Ctrl Busy Status */ |
| #define FLCE 0x00000002 /* Flow Control Enable */ |
| #define PCF 0x00000004 /* Pass Control Frames */ |
| #define BKPRSEN 0x00000008 /* Enable Backpressure */ |
| #define FLCPAUSE 0xFFFF0000 /* Pause Time */ |
| |
| #define SET_FLCPAUSE(x) (((x)&0xFFFF)<< 16) /* Set Pause Time */ |
| |
| /* EMAC_WKUP_CTL Masks */ |
| |
| #define CAPWKFRM 0x00000001 /* Capture Wake-Up Frames */ |
| #define MPKE 0x00000002 /* Magic Packet Enable */ |
| #define RWKE 0x00000004 /* Remote Wake-Up Frame Enable */ |
| #define GUWKE 0x00000008 /* Global Unicast Wake Enable */ |
| #define MPKS 0x00000020 /* Magic Packet Received Status */ |
| #define RWKS 0x00000F00 /* Wake-Up Frame Received Status, Filters 3:0 */ |
| |
| /* EMAC_WKUP_FFCMD Masks */ |
| |
| #define WF0_E 0x00000001 /* Enable Wake-Up Filter 0 */ |
| #define WF0_T 0x00000008 /* Wake-Up Filter 0 Addr Type (Multicast/Unicast*) */ |
| #define WF1_E 0x00000100 /* Enable Wake-Up Filter 1 */ |
| #define WF1_T 0x00000800 /* Wake-Up Filter 1 Addr Type (Multicast/Unicast*) */ |
| #define WF2_E 0x00010000 /* Enable Wake-Up Filter 2 */ |
| #define WF2_T 0x00080000 /* Wake-Up Filter 2 Addr Type (Multicast/Unicast*) */ |
| #define WF3_E 0x01000000 /* Enable Wake-Up Filter 3 */ |
| #define WF3_T 0x08000000 /* Wake-Up Filter 3 Addr Type (Multicast/Unicast*) */ |
| |
| /* EMAC_WKUP_FFOFF Masks */ |
| |
| #define WF0_OFF 0x000000FF /* Wake-Up Filter 0 Pattern Offset */ |
| #define WF1_OFF 0x0000FF00 /* Wake-Up Filter 1 Pattern Offset */ |
| #define WF2_OFF 0x00FF0000 /* Wake-Up Filter 2 Pattern Offset */ |
| #define WF3_OFF 0xFF000000 /* Wake-Up Filter 3 Pattern Offset */ |
| |
| #define SET_WF0_OFF(x) (((x)&0xFF)<< 0 ) /* Set Wake-Up Filter 0 Byte Offset */ |
| #define SET_WF1_OFF(x) (((x)&0xFF)<< 8 ) /* Set Wake-Up Filter 1 Byte Offset */ |
| #define SET_WF2_OFF(x) (((x)&0xFF)<< 16 ) /* Set Wake-Up Filter 2 Byte Offset */ |
| #define SET_WF3_OFF(x) (((x)&0xFF)<< 24 ) /* Set Wake-Up Filter 3 Byte Offset */ |
| /* Set ALL Offsets */ |
| #define SET_WF_OFFS(x0,x1,x2,x3) (SET_WF0_OFF((x0))|SET_WF1_OFF((x1))|SET_WF2_OFF((x2))|SET_WF3_OFF((x3))) |
| |
| /* EMAC_WKUP_FFCRC0 Masks */ |
| |
| #define WF0_CRC 0x0000FFFF /* Wake-Up Filter 0 Pattern CRC */ |
| #define WF1_CRC 0xFFFF0000 /* Wake-Up Filter 1 Pattern CRC */ |
| |
| #define SET_WF0_CRC(x) (((x)&0xFFFF)<< 0 ) /* Set Wake-Up Filter 0 Target CRC */ |
| #define SET_WF1_CRC(x) (((x)&0xFFFF)<< 16 ) /* Set Wake-Up Filter 1 Target CRC */ |
| |
| /* EMAC_WKUP_FFCRC1 Masks */ |
| |
| #define WF2_CRC 0x0000FFFF /* Wake-Up Filter 2 Pattern CRC */ |
| #define WF3_CRC 0xFFFF0000 /* Wake-Up Filter 3 Pattern CRC */ |
| |
| #define SET_WF2_CRC(x) (((x)&0xFFFF)<< 0 ) /* Set Wake-Up Filter 2 Target CRC */ |
| #define SET_WF3_CRC(x) (((x)&0xFFFF)<< 16 ) /* Set Wake-Up Filter 3 Target CRC */ |
| |
| /* EMAC_SYSCTL Masks */ |
| |
| #define PHYIE 0x00000001 /* PHY_INT Interrupt Enable */ |
| #define RXDWA 0x00000002 /* Receive Frame DMA Word Alignment (Odd/Even*) */ |
| #define RXCKS 0x00000004 /* Enable RX Frame TCP/UDP Checksum Computation */ |
| #define TXDWA 0x00000010 /* Transmit Frame DMA Word Alignment (Odd/Even*) */ |
| #define MDCDIV 0x00003F00 /* SCLK:MDC Clock Divisor [MDC=SCLK/(2*(N+1))] */ |
| |
| #define SET_MDCDIV(x) (((x)&0x3F)<< 8) /* Set MDC Clock Divisor */ |
| |
| /* EMAC_SYSTAT Masks */ |
| |
| #define PHYINT 0x00000001 /* PHY_INT Interrupt Status */ |
| #define MMCINT 0x00000002 /* MMC Counter Interrupt Status */ |
| #define RXFSINT 0x00000004 /* RX Frame-Status Interrupt Status */ |
| #define TXFSINT 0x00000008 /* TX Frame-Status Interrupt Status */ |
| #define WAKEDET 0x00000010 /* Wake-Up Detected Status */ |
| #define RXDMAERR 0x00000020 /* RX DMA Direction Error Status */ |
| #define TXDMAERR 0x00000040 /* TX DMA Direction Error Status */ |
| #define STMDONE 0x00000080 /* Station Mgt. Transfer Done Interrupt Status */ |
| |
| /* EMAC_RX_STAT, EMAC_RX_STKY, and EMAC_RX_IRQE Masks */ |
| |
| #define RX_FRLEN 0x000007FF /* Frame Length In Bytes */ |
| #define RX_COMP 0x00001000 /* RX Frame Complete */ |
| #define RX_OK 0x00002000 /* RX Frame Received With No Errors */ |
| #define RX_LONG 0x00004000 /* RX Frame Too Long Error */ |
| #define RX_ALIGN 0x00008000 /* RX Frame Alignment Error */ |
| #define RX_CRC 0x00010000 /* RX Frame CRC Error */ |
| #define RX_LEN 0x00020000 /* RX Frame Length Error */ |
| #define RX_FRAG 0x00040000 /* RX Frame Fragment Error */ |
| #define RX_ADDR 0x00080000 /* RX Frame Address Filter Failed Error */ |
| #define RX_DMAO 0x00100000 /* RX Frame DMA Overrun Error */ |
| #define RX_PHY 0x00200000 /* RX Frame PHY Error */ |
| #define RX_LATE 0x00400000 /* RX Frame Late Collision Error */ |
| #define RX_RANGE 0x00800000 /* RX Frame Length Field Out of Range Error */ |
| #define RX_MULTI 0x01000000 /* RX Multicast Frame Indicator */ |
| #define RX_BROAD 0x02000000 /* RX Broadcast Frame Indicator */ |
| #define RX_CTL 0x04000000 /* RX Control Frame Indicator */ |
| #define RX_UCTL 0x08000000 /* Unsupported RX Control Frame Indicator */ |
| #define RX_TYPE 0x10000000 /* RX Typed Frame Indicator */ |
| #define RX_VLAN1 0x20000000 /* RX VLAN1 Frame Indicator */ |
| #define RX_VLAN2 0x40000000 /* RX VLAN2 Frame Indicator */ |
| #define RX_ACCEPT 0x80000000 /* RX Frame Accepted Indicator */ |
| |
| /* EMAC_TX_STAT, EMAC_TX_STKY, and EMAC_TX_IRQE Masks */ |
| |
| #define TX_COMP 0x00000001 /* TX Frame Complete */ |
| #define TX_OK 0x00000002 /* TX Frame Sent With No Errors */ |
| #define TX_ECOLL 0x00000004 /* TX Frame Excessive Collision Error */ |
| #define TX_LATE 0x00000008 /* TX Frame Late Collision Error */ |
| #define TX_DMAU 0x00000010 /* TX Frame DMA Underrun Error (STAT) */ |
| #define TX_MACE 0x00000010 /* Internal MAC Error Detected (STKY and IRQE) */ |
| #define TX_EDEFER 0x00000020 /* TX Frame Excessive Deferral Error */ |
| #define TX_BROAD 0x00000040 /* TX Broadcast Frame Indicator */ |
| #define TX_MULTI 0x00000080 /* TX Multicast Frame Indicator */ |
| #define TX_CCNT 0x00000F00 /* TX Frame Collision Count */ |
| #define TX_DEFER 0x00001000 /* TX Frame Deferred Indicator */ |
| #define TX_CRS 0x00002000 /* TX Frame Carrier Sense Not Asserted Error */ |
| #define TX_LOSS 0x00004000 /* TX Frame Carrier Lost During TX Error */ |
| #define TX_RETRY 0x00008000 /* TX Frame Successful After Retry */ |
| #define TX_FRLEN 0x07FF0000 /* TX Frame Length (Bytes) */ |
| |
| /* EMAC_MMC_CTL Masks */ |
| #define RSTC 0x00000001 /* Reset All Counters */ |
| #define CROLL 0x00000002 /* Counter Roll-Over Enable */ |
| #define CCOR 0x00000004 /* Counter Clear-On-Read Mode Enable */ |
| #define MMCE 0x00000008 /* Enable MMC Counter Operation */ |
| |
| /* EMAC_MMC_RIRQS and EMAC_MMC_RIRQE Masks */ |
| #define RX_OK_CNT 0x00000001 /* RX Frames Received With No Errors */ |
| #define RX_FCS_CNT 0x00000002 /* RX Frames W/Frame Check Sequence Errors */ |
| #define RX_ALIGN_CNT 0x00000004 /* RX Frames With Alignment Errors */ |
| #define RX_OCTET_CNT 0x00000008 /* RX Octets Received OK */ |
| #define RX_LOST_CNT 0x00000010 /* RX Frames Lost Due To Internal MAC RX Error */ |
| #define RX_UNI_CNT 0x00000020 /* Unicast RX Frames Received OK */ |
| #define RX_MULTI_CNT 0x00000040 /* Multicast RX Frames Received OK */ |
| #define RX_BROAD_CNT 0x00000080 /* Broadcast RX Frames Received OK */ |
| #define RX_IRL_CNT 0x00000100 /* RX Frames With In-Range Length Errors */ |
| #define RX_ORL_CNT 0x00000200 /* RX Frames With Out-Of-Range Length Errors */ |
| #define RX_LONG_CNT 0x00000400 /* RX Frames With Frame Too Long Errors */ |
| #define RX_MACCTL_CNT 0x00000800 /* MAC Control RX Frames Received */ |
| #define RX_OPCODE_CTL 0x00001000 /* Unsupported Op-Code RX Frames Received */ |
| #define RX_PAUSE_CNT 0x00002000 /* PAUSEMAC Control RX Frames Received */ |
| #define RX_ALLF_CNT 0x00004000 /* All RX Frames Received */ |
| #define RX_ALLO_CNT 0x00008000 /* All RX Octets Received */ |
| #define RX_TYPED_CNT 0x00010000 /* Typed RX Frames Received */ |
| #define RX_SHORT_CNT 0x00020000 /* RX Frame Fragments (< 64 Bytes) Received */ |
| #define RX_EQ64_CNT 0x00040000 /* 64-Byte RX Frames Received */ |
| #define RX_LT128_CNT 0x00080000 /* 65-127-Byte RX Frames Received */ |
| #define RX_LT256_CNT 0x00100000 /* 128-255-Byte RX Frames Received */ |
| #define RX_LT512_CNT 0x00200000 /* 256-511-Byte RX Frames Received */ |
| #define RX_LT1024_CNT 0x00400000 /* 512-1023-Byte RX Frames Received */ |
| #define RX_GE1024_CNT 0x00800000 /* 1024-Max-Byte RX Frames Received */ |
| |
| /* EMAC_MMC_TIRQS and EMAC_MMC_TIRQE Masks */ |
| |
| #define TX_OK_CNT 0x00000001 /* TX Frames Sent OK */ |
| #define TX_SCOLL_CNT 0x00000002 /* TX Frames With Single Collisions */ |
| #define TX_MCOLL_CNT 0x00000004 /* TX Frames With Multiple Collisions */ |
| #define TX_OCTET_CNT 0x00000008 /* TX Octets Sent OK */ |
| #define TX_DEFER_CNT 0x00000010 /* TX Frames With Deferred Transmission */ |
| #define TX_LATE_CNT 0x00000020 /* TX Frames With Late Collisions */ |
| #define TX_ABORTC_CNT 0x00000040 /* TX Frames Aborted Due To Excess Collisions */ |
| #define TX_LOST_CNT 0x00000080 /* TX Frames Lost Due To Internal MAC TX Error */ |
| #define TX_CRS_CNT 0x00000100 /* TX Frames With Carrier Sense Errors */ |
| #define TX_UNI_CNT 0x00000200 /* Unicast TX Frames Sent */ |
| #define TX_MULTI_CNT 0x00000400 /* Multicast TX Frames Sent */ |
| #define TX_BROAD_CNT 0x00000800 /* Broadcast TX Frames Sent */ |
| #define TX_EXDEF_CTL 0x00001000 /* TX Frames With Excessive Deferral */ |
| #define TX_MACCTL_CNT 0x00002000 /* MAC Control TX Frames Sent */ |
| #define TX_ALLF_CNT 0x00004000 /* All TX Frames Sent */ |
| #define TX_ALLO_CNT 0x00008000 /* All TX Octets Sent */ |
| #define TX_EQ64_CNT 0x00010000 /* 64-Byte TX Frames Sent */ |
| #define TX_LT128_CNT 0x00020000 /* 65-127-Byte TX Frames Sent */ |
| #define TX_LT256_CNT 0x00040000 /* 128-255-Byte TX Frames Sent */ |
| #define TX_LT512_CNT 0x00080000 /* 256-511-Byte TX Frames Sent */ |
| #define TX_LT1024_CNT 0x00100000 /* 512-1023-Byte TX Frames Sent */ |
| #define TX_GE1024_CNT 0x00200000 /* 1024-Max-Byte TX Frames Sent */ |
| #define TX_ABORT_CNT 0x00400000 /* TX Frames Aborted */ |
| |
| /* SDH Registers */ |
| |
| #define SDH_PWR_CTL 0xFFC03900 /* SDH Power Control */ |
| #define SDH_CLK_CTL 0xFFC03904 /* SDH Clock Control */ |
| #define SDH_ARGUMENT 0xFFC03908 /* SDH Argument */ |
| #define SDH_COMMAND 0xFFC0390C /* SDH Command */ |
| #define SDH_RESP_CMD 0xFFC03910 /* SDH Response Command */ |
| #define SDH_RESPONSE0 0xFFC03914 /* SDH Response0 */ |
| #define SDH_RESPONSE1 0xFFC03918 /* SDH Response1 */ |
| #define SDH_RESPONSE2 0xFFC0391C /* SDH Response2 */ |
| #define SDH_RESPONSE3 0xFFC03920 /* SDH Response3 */ |
| #define SDH_DATA_TIMER 0xFFC03924 /* SDH Data Timer */ |
| #define SDH_DATA_LGTH 0xFFC03928 /* SDH Data Length */ |
| #define SDH_DATA_CTL 0xFFC0392C /* SDH Data Control */ |
| #define SDH_DATA_CNT 0xFFC03930 /* SDH Data Counter */ |
| #define SDH_STATUS 0xFFC03934 /* SDH Status */ |
| #define SDH_STATUS_CLR 0xFFC03938 /* SDH Status Clear */ |
| #define SDH_MASK0 0xFFC0393C /* SDH Interrupt0 Mask */ |
| #define SDH_MASK1 0xFFC03940 /* SDH Interrupt1 Mask */ |
| #define SDH_FIFO_CNT 0xFFC03948 /* SDH FIFO Counter */ |
| #define SDH_FIFO 0xFFC03980 /* SDH Data FIFO */ |
| #define SDH_E_STATUS 0xFFC039C0 /* SDH Exception Status */ |
| #define SDH_E_MASK 0xFFC039C4 /* SDH Exception Mask */ |
| #define SDH_CFG 0xFFC039C8 /* SDH Configuration */ |
| #define SDH_RD_WAIT_EN 0xFFC039CC /* SDH Read Wait Enable */ |
| #define SDH_PID0 0xFFC039D0 /* SDH Peripheral Identification0 */ |
| #define SDH_PID1 0xFFC039D4 /* SDH Peripheral Identification1 */ |
| #define SDH_PID2 0xFFC039D8 /* SDH Peripheral Identification2 */ |
| #define SDH_PID3 0xFFC039DC /* SDH Peripheral Identification3 */ |
| #define SDH_PID4 0xFFC039E0 /* SDH Peripheral Identification4 */ |
| #define SDH_PID5 0xFFC039E4 /* SDH Peripheral Identification5 */ |
| #define SDH_PID6 0xFFC039E8 /* SDH Peripheral Identification6 */ |
| #define SDH_PID7 0xFFC039EC /* SDH Peripheral Identification7 */ |
| |
| /* Removable Storage Interface Registers */ |
| |
| #define RSI_PWR_CONTROL 0xFFC03800 /* RSI Power Control Register */ |
| #define RSI_CLK_CONTROL 0xFFC03804 /* RSI Clock Control Register */ |
| #define RSI_ARGUMENT 0xFFC03808 /* RSI Argument Register */ |
| #define RSI_COMMAND 0xFFC0380C /* RSI Command Register */ |
| #define RSI_RESP_CMD 0xFFC03810 /* RSI Response Command Register */ |
| #define RSI_RESPONSE0 0xFFC03814 /* RSI Response Register */ |
| #define RSI_RESPONSE1 0xFFC03818 /* RSI Response Register */ |
| #define RSI_RESPONSE2 0xFFC0381C /* RSI Response Register */ |
| #define RSI_RESPONSE3 0xFFC03820 /* RSI Response Register */ |
| #define RSI_DATA_TIMER 0xFFC03824 /* RSI Data Timer Register */ |
| #define RSI_DATA_LGTH 0xFFC03828 /* RSI Data Length Register */ |
| #define RSI_DATA_CONTROL 0xFFC0382C /* RSI Data Control Register */ |
| #define RSI_DATA_CNT 0xFFC03830 /* RSI Data Counter Register */ |
| #define RSI_STATUS 0xFFC03834 /* RSI Status Register */ |
| #define RSI_STATUSCL 0xFFC03838 /* RSI Status Clear Register */ |
| #define RSI_MASK0 0xFFC0383C /* RSI Interrupt 0 Mask Register */ |
| #define RSI_MASK1 0xFFC03840 /* RSI Interrupt 1 Mask Register */ |
| #define RSI_FIFO_CNT 0xFFC03848 /* RSI FIFO Counter Register */ |
| #define RSI_CEATA_CONTROL 0xFFC0384C /* RSI CEATA Register */ |
| #define RSI_FIFO 0xFFC03880 /* RSI Data FIFO Register */ |
| #define RSI_ESTAT 0xFFC038C0 /* RSI Exception Status Register */ |
| #define RSI_EMASK 0xFFC038C4 /* RSI Exception Mask Register */ |
| #define RSI_CONFIG 0xFFC038C8 /* RSI Configuration Register */ |
| #define RSI_RD_WAIT_EN 0xFFC038CC /* RSI Read Wait Enable Register */ |
| #define RSI_PID0 0xFFC03FE0 /* RSI Peripheral ID Register 0 */ |
| #define RSI_PID1 0xFFC03FE4 /* RSI Peripheral ID Register 1 */ |
| #define RSI_PID2 0xFFC03FE8 /* RSI Peripheral ID Register 2 */ |
| #define RSI_PID3 0xFFC03FEC /* RSI Peripheral ID Register 3 */ |
| #define RSI_PID4 0xFFC03FF0 /* RSI Peripheral ID Register 4 */ |
| #define RSI_PID5 0xFFC03FF4 /* RSI Peripheral ID Register 5 */ |
| #define RSI_PID6 0xFFC03FF8 /* RSI Peripheral ID Register 6 */ |
| #define RSI_PID7 0xFFC03FFC /* RSI Peripheral ID Register 7 */ |
| |
| /* PTP TSYNC Registers */ |
| |
| #define EMAC_PTP_CTL 0xFFC030A0 /* PTP Block Control */ |
| #define EMAC_PTP_IE 0xFFC030A4 /* PTP Block Interrupt Enable */ |
| #define EMAC_PTP_ISTAT 0xFFC030A8 /* PTP Block Interrupt Status */ |
| #define EMAC_PTP_FOFF 0xFFC030AC /* PTP Filter offset Register */ |
| #define EMAC_PTP_FV1 0xFFC030B0 /* PTP Filter Value Register 1 */ |
| #define EMAC_PTP_FV2 0xFFC030B4 /* PTP Filter Value Register 2 */ |
| #define EMAC_PTP_FV3 0xFFC030B8 /* PTP Filter Value Register 3 */ |
| #define EMAC_PTP_ADDEND 0xFFC030BC /* PTP Addend for Frequency Compensation */ |
| #define EMAC_PTP_ACCR 0xFFC030C0 /* PTP Accumulator for Frequency Compensation */ |
| #define EMAC_PTP_OFFSET 0xFFC030C4 /* PTP Time Offset Register */ |
| #define EMAC_PTP_TIMELO 0xFFC030C8 /* PTP Precision Clock Time Low */ |
| #define EMAC_PTP_TIMEHI 0xFFC030CC /* PTP Precision Clock Time High */ |
| #define EMAC_PTP_RXSNAPLO 0xFFC030D0 /* PTP Receive Snapshot Register Low */ |
| #define EMAC_PTP_RXSNAPHI 0xFFC030D4 /* PTP Receive Snapshot Register High */ |
| #define EMAC_PTP_TXSNAPLO 0xFFC030D8 /* PTP Transmit Snapshot Register Low */ |
| #define EMAC_PTP_TXSNAPHI 0xFFC030DC /* PTP Transmit Snapshot Register High */ |
| #define EMAC_PTP_ALARMLO 0xFFC030E0 /* PTP Alarm time Low */ |
| #define EMAC_PTP_ALARMHI 0xFFC030E4 /* PTP Alarm time High */ |
| #define EMAC_PTP_ID_OFF 0xFFC030E8 /* PTP Capture ID offset register */ |
| #define EMAC_PTP_ID_SNAP 0xFFC030EC /* PTP Capture ID register */ |
| #define EMAC_PTP_PPS_STARTLO 0xFFC030F0 /* PPS Start Time Low */ |
| #define EMAC_PTP_PPS_STARTHI 0xFFC030F4 /* PPS Start Time High */ |
| #define EMAC_PTP_PPS_PERIOD 0xFFC030F8 /* PPS Count Register */ |
| |
| /* ********************************************************** */ |
| /* SINGLE BIT MACRO PAIRS (bit mask and negated one) */ |
| /* and MULTI BIT READ MACROS */ |
| /* ********************************************************** */ |
| |
| /* Bit masks for SDH_COMMAND */ |
| |
| #define CMD_IDX 0x3f /* Command Index */ |
| #define CMD_RSP 0x40 /* Response */ |
| #define CMD_L_RSP 0x80 /* Long Response */ |
| #define CMD_INT_E 0x100 /* Command Interrupt */ |
| #define CMD_PEND_E 0x200 /* Command Pending */ |
| #define CMD_E 0x400 /* Command Enable */ |
| |
| /* Bit masks for SDH_PWR_CTL */ |
| |
| #define PWR_ON 0x3 /* Power On */ |
| #if 0 |
| #define TBD 0x3c /* TBD */ |
| #endif |
| #define SD_CMD_OD 0x40 /* Open Drain Output */ |
| #define ROD_CTL 0x80 /* Rod Control */ |
| |
| /* Bit masks for SDH_CLK_CTL */ |
| |
| #define CLKDIV 0xff /* MC_CLK Divisor */ |
| #define CLK_E 0x100 /* MC_CLK Bus Clock Enable */ |
| #define PWR_SV_E 0x200 /* Power Save Enable */ |
| #define CLKDIV_BYPASS 0x400 /* Bypass Divisor */ |
| #define WIDE_BUS 0x800 /* Wide Bus Mode Enable */ |
| |
| /* Bit masks for SDH_RESP_CMD */ |
| |
| #define RESP_CMD 0x3f /* Response Command */ |
| |
| /* Bit masks for SDH_DATA_CTL */ |
| |
| #define DTX_E 0x1 /* Data Transfer Enable */ |
| #define DTX_DIR 0x2 /* Data Transfer Direction */ |
| #define DTX_MODE 0x4 /* Data Transfer Mode */ |
| #define DTX_DMA_E 0x8 /* Data Transfer DMA Enable */ |
| #define DTX_BLK_LGTH 0xf0 /* Data Transfer Block Length */ |
| |
| /* Bit masks for SDH_STATUS */ |
| |
| #define CMD_CRC_FAIL 0x1 /* CMD CRC Fail */ |
| #define DAT_CRC_FAIL 0x2 /* Data CRC Fail */ |
| #define CMD_TIME_OUT 0x4 /* CMD Time Out */ |
| #define DAT_TIME_OUT 0x8 /* Data Time Out */ |
| #define TX_UNDERRUN 0x10 /* Transmit Underrun */ |
| #define RX_OVERRUN 0x20 /* Receive Overrun */ |
| #define CMD_RESP_END 0x40 /* CMD Response End */ |
| #define CMD_SENT 0x80 /* CMD Sent */ |
| #define DAT_END 0x100 /* Data End */ |
| #define START_BIT_ERR 0x200 /* Start Bit Error */ |
| #define DAT_BLK_END 0x400 /* Data Block End */ |
| #define CMD_ACT 0x800 /* CMD Active */ |
| #define TX_ACT 0x1000 /* Transmit Active */ |
| #define RX_ACT 0x2000 /* Receive Active */ |
| #define TX_FIFO_STAT 0x4000 /* Transmit FIFO Status */ |
| #define RX_FIFO_STAT 0x8000 /* Receive FIFO Status */ |
| #define TX_FIFO_FULL 0x10000 /* Transmit FIFO Full */ |
| #define RX_FIFO_FULL 0x20000 /* Receive FIFO Full */ |
| #define TX_FIFO_ZERO 0x40000 /* Transmit FIFO Empty */ |
| #define RX_DAT_ZERO 0x80000 /* Receive FIFO Empty */ |
| #define TX_DAT_RDY 0x100000 /* Transmit Data Available */ |
| #define RX_FIFO_RDY 0x200000 /* Receive Data Available */ |
| |
| /* Bit masks for SDH_STATUS_CLR */ |
| |
| #define CMD_CRC_FAIL_STAT 0x1 /* CMD CRC Fail Status */ |
| #define DAT_CRC_FAIL_STAT 0x2 /* Data CRC Fail Status */ |
| #define CMD_TIMEOUT_STAT 0x4 /* CMD Time Out Status */ |
| #define DAT_TIMEOUT_STAT 0x8 /* Data Time Out status */ |
| #define TX_UNDERRUN_STAT 0x10 /* Transmit Underrun Status */ |
| #define RX_OVERRUN_STAT 0x20 /* Receive Overrun Status */ |
| #define CMD_RESP_END_STAT 0x40 /* CMD Response End Status */ |
| #define CMD_SENT_STAT 0x80 /* CMD Sent Status */ |
| #define DAT_END_STAT 0x100 /* Data End Status */ |
| #define START_BIT_ERR_STAT 0x200 /* Start Bit Error Status */ |
| #define DAT_BLK_END_STAT 0x400 /* Data Block End Status */ |
| |
| /* Bit masks for SDH_MASK0 */ |
| |
| #define CMD_CRC_FAIL_MASK 0x1 /* CMD CRC Fail Mask */ |
| #define DAT_CRC_FAIL_MASK 0x2 /* Data CRC Fail Mask */ |
| #define CMD_TIMEOUT_MASK 0x4 /* CMD Time Out Mask */ |
| #define DAT_TIMEOUT_MASK 0x8 /* Data Time Out Mask */ |
| #define TX_UNDERRUN_MASK 0x10 /* Transmit Underrun Mask */ |
| #define RX_OVERRUN_MASK 0x20 /* Receive Overrun Mask */ |
| #define CMD_RESP_END_MASK 0x40 /* CMD Response End Mask */ |
| #define CMD_SENT_MASK 0x80 /* CMD Sent Mask */ |
| #define DAT_END_MASK 0x100 /* Data End Mask */ |
| #define START_BIT_ERR_MASK 0x200 /* Start Bit Error Mask */ |
| #define DAT_BLK_END_MASK 0x400 /* Data Block End Mask */ |
| #define CMD_ACT_MASK 0x800 /* CMD Active Mask */ |
| #define TX_ACT_MASK 0x1000 /* Transmit Active Mask */ |
| #define RX_ACT_MASK 0x2000 /* Receive Active Mask */ |
| #define TX_FIFO_STAT_MASK 0x4000 /* Transmit FIFO Status Mask */ |
| #define RX_FIFO_STAT_MASK 0x8000 /* Receive FIFO Status Mask */ |
| #define TX_FIFO_FULL_MASK 0x10000 /* Transmit FIFO Full Mask */ |
| #define RX_FIFO_FULL_MASK 0x20000 /* Receive FIFO Full Mask */ |
| #define TX_FIFO_ZERO_MASK 0x40000 /* Transmit FIFO Empty Mask */ |
| #define RX_DAT_ZERO_MASK 0x80000 /* Receive FIFO Empty Mask */ |
| #define TX_DAT_RDY_MASK 0x100000 /* Transmit Data Available Mask */ |
| #define RX_FIFO_RDY_MASK 0x200000 /* Receive Data Available Mask */ |
| |
| /* Bit masks for SDH_FIFO_CNT */ |
| |
| #define FIFO_COUNT 0x7fff /* FIFO Count */ |
| |
| /* Bit masks for SDH_E_STATUS */ |
| |
| #define SDIO_INT_DET 0x2 /* SDIO Int Detected */ |
| #define SD_CARD_DET 0x10 /* SD Card Detect */ |
| |
| /* Bit masks for SDH_E_MASK */ |
| |
| #define SDIO_MSK 0x2 /* Mask SDIO Int Detected */ |
| #define SCD_MSK 0x40 /* Mask Card Detect */ |
| |
| /* Bit masks for SDH_CFG */ |
| |
| #define CLKS_EN 0x1 /* Clocks Enable */ |
| #define SD4E 0x4 /* SDIO 4-Bit Enable */ |
| #define MWE 0x8 /* Moving Window Enable */ |
| #define SD_RST 0x10 /* SDMMC Reset */ |
| #define PUP_SDDAT 0x20 /* Pull-up SD_DAT */ |
| #define PUP_SDDAT3 0x40 /* Pull-up SD_DAT3 */ |
| #define PD_SDDAT3 0x80 /* Pull-down SD_DAT3 */ |
| |
| /* Bit masks for SDH_RD_WAIT_EN */ |
| |
| #define RWR 0x1 /* Read Wait Request */ |
| |
| #endif /* _DEF_BF518_H */ |