| /* |
| * Platform driver for the Synopsys DesignWare DMA Controller |
| * |
| * Copyright (C) 2007-2008 Atmel Corporation |
| * Copyright (C) 2010-2011 ST Microelectronics |
| * Copyright (C) 2013 Intel Corporation |
| * |
| * Some parts of this driver are derived from the original dw_dmac. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/device.h> |
| #include <linux/clk.h> |
| #include <linux/pm_runtime.h> |
| #include <linux/platform_device.h> |
| #include <linux/dmaengine.h> |
| #include <linux/dma-mapping.h> |
| #include <linux/of.h> |
| #include <linux/of_dma.h> |
| #include <linux/acpi.h> |
| #include <linux/acpi_dma.h> |
| |
| #include "internal.h" |
| |
| #define DRV_NAME "dw_dmac" |
| |
| static struct dma_chan *dw_dma_of_xlate(struct of_phandle_args *dma_spec, |
| struct of_dma *ofdma) |
| { |
| struct dw_dma *dw = ofdma->of_dma_data; |
| struct dw_dma_slave slave = { |
| .dma_dev = dw->dma.dev, |
| }; |
| dma_cap_mask_t cap; |
| |
| if (dma_spec->args_count != 3) |
| return NULL; |
| |
| slave.src_id = dma_spec->args[0]; |
| slave.dst_id = dma_spec->args[0]; |
| slave.m_master = dma_spec->args[1]; |
| slave.p_master = dma_spec->args[2]; |
| |
| if (WARN_ON(slave.src_id >= DW_DMA_MAX_NR_REQUESTS || |
| slave.dst_id >= DW_DMA_MAX_NR_REQUESTS || |
| slave.m_master >= dw->pdata->nr_masters || |
| slave.p_master >= dw->pdata->nr_masters)) |
| return NULL; |
| |
| dma_cap_zero(cap); |
| dma_cap_set(DMA_SLAVE, cap); |
| |
| /* TODO: there should be a simpler way to do this */ |
| return dma_request_channel(cap, dw_dma_filter, &slave); |
| } |
| |
| #ifdef CONFIG_ACPI |
| static bool dw_dma_acpi_filter(struct dma_chan *chan, void *param) |
| { |
| struct acpi_dma_spec *dma_spec = param; |
| struct dw_dma_slave slave = { |
| .dma_dev = dma_spec->dev, |
| .src_id = dma_spec->slave_id, |
| .dst_id = dma_spec->slave_id, |
| .m_master = 0, |
| .p_master = 1, |
| }; |
| |
| return dw_dma_filter(chan, &slave); |
| } |
| |
| static void dw_dma_acpi_controller_register(struct dw_dma *dw) |
| { |
| struct device *dev = dw->dma.dev; |
| struct acpi_dma_filter_info *info; |
| int ret; |
| |
| info = devm_kzalloc(dev, sizeof(*info), GFP_KERNEL); |
| if (!info) |
| return; |
| |
| dma_cap_zero(info->dma_cap); |
| dma_cap_set(DMA_SLAVE, info->dma_cap); |
| info->filter_fn = dw_dma_acpi_filter; |
| |
| ret = acpi_dma_controller_register(dev, acpi_dma_simple_xlate, info); |
| if (ret) |
| dev_err(dev, "could not register acpi_dma_controller\n"); |
| } |
| |
| static void dw_dma_acpi_controller_free(struct dw_dma *dw) |
| { |
| struct device *dev = dw->dma.dev; |
| |
| acpi_dma_controller_free(dev); |
| } |
| #else /* !CONFIG_ACPI */ |
| static inline void dw_dma_acpi_controller_register(struct dw_dma *dw) {} |
| static inline void dw_dma_acpi_controller_free(struct dw_dma *dw) {} |
| #endif /* !CONFIG_ACPI */ |
| |
| #ifdef CONFIG_OF |
| static struct dw_dma_platform_data * |
| dw_dma_parse_dt(struct platform_device *pdev) |
| { |
| struct device_node *np = pdev->dev.of_node; |
| struct dw_dma_platform_data *pdata; |
| u32 tmp, arr[DW_DMA_MAX_NR_MASTERS], mb[DW_DMA_MAX_NR_CHANNELS]; |
| u32 nr_masters; |
| u32 nr_channels; |
| |
| if (!np) { |
| dev_err(&pdev->dev, "Missing DT data\n"); |
| return NULL; |
| } |
| |
| if (of_property_read_u32(np, "dma-masters", &nr_masters)) |
| return NULL; |
| if (nr_masters < 1 || nr_masters > DW_DMA_MAX_NR_MASTERS) |
| return NULL; |
| |
| if (of_property_read_u32(np, "dma-channels", &nr_channels)) |
| return NULL; |
| if (nr_channels > DW_DMA_MAX_NR_CHANNELS) |
| return NULL; |
| |
| pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL); |
| if (!pdata) |
| return NULL; |
| |
| pdata->nr_masters = nr_masters; |
| pdata->nr_channels = nr_channels; |
| |
| if (of_property_read_bool(np, "is_private")) |
| pdata->is_private = true; |
| |
| /* |
| * All known devices, which use DT for configuration, support |
| * memory-to-memory transfers. So enable it by default. |
| */ |
| pdata->is_memcpy = true; |
| |
| if (!of_property_read_u32(np, "chan_allocation_order", &tmp)) |
| pdata->chan_allocation_order = (unsigned char)tmp; |
| |
| if (!of_property_read_u32(np, "chan_priority", &tmp)) |
| pdata->chan_priority = tmp; |
| |
| if (!of_property_read_u32(np, "block_size", &tmp)) |
| pdata->block_size = tmp; |
| |
| if (!of_property_read_u32_array(np, "data-width", arr, nr_masters)) { |
| for (tmp = 0; tmp < nr_masters; tmp++) |
| pdata->data_width[tmp] = arr[tmp]; |
| } else if (!of_property_read_u32_array(np, "data_width", arr, nr_masters)) { |
| for (tmp = 0; tmp < nr_masters; tmp++) |
| pdata->data_width[tmp] = BIT(arr[tmp] & 0x07); |
| } |
| |
| if (!of_property_read_u32_array(np, "multi-block", mb, nr_channels)) { |
| for (tmp = 0; tmp < nr_channels; tmp++) |
| pdata->multi_block[tmp] = mb[tmp]; |
| } else { |
| for (tmp = 0; tmp < nr_channels; tmp++) |
| pdata->multi_block[tmp] = 1; |
| } |
| |
| if (!of_property_read_u32(np, "snps,dma-protection-control", &tmp)) { |
| if (tmp > CHAN_PROTCTL_MASK) |
| return NULL; |
| pdata->protctl = tmp; |
| } |
| |
| return pdata; |
| } |
| #else |
| static inline struct dw_dma_platform_data * |
| dw_dma_parse_dt(struct platform_device *pdev) |
| { |
| return NULL; |
| } |
| #endif |
| |
| static int dw_probe(struct platform_device *pdev) |
| { |
| struct dw_dma_chip *chip; |
| struct device *dev = &pdev->dev; |
| struct resource *mem; |
| const struct dw_dma_platform_data *pdata; |
| int err; |
| |
| chip = devm_kzalloc(dev, sizeof(*chip), GFP_KERNEL); |
| if (!chip) |
| return -ENOMEM; |
| |
| chip->irq = platform_get_irq(pdev, 0); |
| if (chip->irq < 0) |
| return chip->irq; |
| |
| mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
| chip->regs = devm_ioremap_resource(dev, mem); |
| if (IS_ERR(chip->regs)) |
| return PTR_ERR(chip->regs); |
| |
| err = dma_coerce_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32)); |
| if (err) |
| return err; |
| |
| pdata = dev_get_platdata(dev); |
| if (!pdata) |
| pdata = dw_dma_parse_dt(pdev); |
| |
| chip->dev = dev; |
| chip->id = pdev->id; |
| chip->pdata = pdata; |
| |
| chip->clk = devm_clk_get(chip->dev, "hclk"); |
| if (IS_ERR(chip->clk)) |
| return PTR_ERR(chip->clk); |
| err = clk_prepare_enable(chip->clk); |
| if (err) |
| return err; |
| |
| pm_runtime_enable(&pdev->dev); |
| |
| err = dw_dma_probe(chip); |
| if (err) |
| goto err_dw_dma_probe; |
| |
| platform_set_drvdata(pdev, chip); |
| |
| if (pdev->dev.of_node) { |
| err = of_dma_controller_register(pdev->dev.of_node, |
| dw_dma_of_xlate, chip->dw); |
| if (err) |
| dev_err(&pdev->dev, |
| "could not register of_dma_controller\n"); |
| } |
| |
| if (ACPI_HANDLE(&pdev->dev)) |
| dw_dma_acpi_controller_register(chip->dw); |
| |
| return 0; |
| |
| err_dw_dma_probe: |
| pm_runtime_disable(&pdev->dev); |
| clk_disable_unprepare(chip->clk); |
| return err; |
| } |
| |
| static int dw_remove(struct platform_device *pdev) |
| { |
| struct dw_dma_chip *chip = platform_get_drvdata(pdev); |
| |
| if (ACPI_HANDLE(&pdev->dev)) |
| dw_dma_acpi_controller_free(chip->dw); |
| |
| if (pdev->dev.of_node) |
| of_dma_controller_free(pdev->dev.of_node); |
| |
| dw_dma_remove(chip); |
| pm_runtime_disable(&pdev->dev); |
| clk_disable_unprepare(chip->clk); |
| |
| return 0; |
| } |
| |
| static void dw_shutdown(struct platform_device *pdev) |
| { |
| struct dw_dma_chip *chip = platform_get_drvdata(pdev); |
| |
| /* |
| * We have to call dw_dma_disable() to stop any ongoing transfer. On |
| * some platforms we can't do that since DMA device is powered off. |
| * Moreover we have no possibility to check if the platform is affected |
| * or not. That's why we call pm_runtime_get_sync() / pm_runtime_put() |
| * unconditionally. On the other hand we can't use |
| * pm_runtime_suspended() because runtime PM framework is not fully |
| * used by the driver. |
| */ |
| pm_runtime_get_sync(chip->dev); |
| dw_dma_disable(chip); |
| pm_runtime_put_sync_suspend(chip->dev); |
| |
| clk_disable_unprepare(chip->clk); |
| } |
| |
| #ifdef CONFIG_OF |
| static const struct of_device_id dw_dma_of_id_table[] = { |
| { .compatible = "snps,dma-spear1340" }, |
| {} |
| }; |
| MODULE_DEVICE_TABLE(of, dw_dma_of_id_table); |
| #endif |
| |
| #ifdef CONFIG_ACPI |
| static const struct acpi_device_id dw_dma_acpi_id_table[] = { |
| { "INTL9C60", 0 }, |
| { } |
| }; |
| MODULE_DEVICE_TABLE(acpi, dw_dma_acpi_id_table); |
| #endif |
| |
| #ifdef CONFIG_PM_SLEEP |
| |
| static int dw_suspend_late(struct device *dev) |
| { |
| struct platform_device *pdev = to_platform_device(dev); |
| struct dw_dma_chip *chip = platform_get_drvdata(pdev); |
| |
| dw_dma_disable(chip); |
| clk_disable_unprepare(chip->clk); |
| |
| return 0; |
| } |
| |
| static int dw_resume_early(struct device *dev) |
| { |
| struct platform_device *pdev = to_platform_device(dev); |
| struct dw_dma_chip *chip = platform_get_drvdata(pdev); |
| int ret; |
| |
| ret = clk_prepare_enable(chip->clk); |
| if (ret) |
| return ret; |
| |
| return dw_dma_enable(chip); |
| } |
| |
| #endif /* CONFIG_PM_SLEEP */ |
| |
| static const struct dev_pm_ops dw_dev_pm_ops = { |
| SET_LATE_SYSTEM_SLEEP_PM_OPS(dw_suspend_late, dw_resume_early) |
| }; |
| |
| static struct platform_driver dw_driver = { |
| .probe = dw_probe, |
| .remove = dw_remove, |
| .shutdown = dw_shutdown, |
| .driver = { |
| .name = DRV_NAME, |
| .pm = &dw_dev_pm_ops, |
| .of_match_table = of_match_ptr(dw_dma_of_id_table), |
| .acpi_match_table = ACPI_PTR(dw_dma_acpi_id_table), |
| }, |
| }; |
| |
| static int __init dw_init(void) |
| { |
| return platform_driver_register(&dw_driver); |
| } |
| subsys_initcall(dw_init); |
| |
| static void __exit dw_exit(void) |
| { |
| platform_driver_unregister(&dw_driver); |
| } |
| module_exit(dw_exit); |
| |
| MODULE_LICENSE("GPL v2"); |
| MODULE_DESCRIPTION("Synopsys DesignWare DMA Controller platform driver"); |
| MODULE_ALIAS("platform:" DRV_NAME); |