| /****************************************************************************** |
| |
| AudioScience HPI driver |
| Copyright (C) 1997-2010 AudioScience Inc. <support@audioscience.com> |
| |
| This program is free software; you can redistribute it and/or modify |
| it under the terms of version 2 of the GNU General Public License as |
| published by the Free Software Foundation; |
| |
| This program is distributed in the hope that it will be useful, |
| but WITHOUT ANY WARRANTY; without even the implied warranty of |
| MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| GNU General Public License for more details. |
| |
| You should have received a copy of the GNU General Public License |
| along with this program; if not, write to the Free Software |
| Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA |
| |
| Hardware Programming Interface (HPI) for AudioScience |
| ASI50xx, AS51xx, ASI6xxx, ASI87xx ASI89xx series adapters. |
| These PCI and PCIe bus adapters are based on a |
| TMS320C6205 PCI bus mastering DSP, |
| and (except ASI50xx) TI TMS320C6xxx floating point DSP |
| |
| Exported function: |
| void HPI_6205(struct hpi_message *phm, struct hpi_response *phr) |
| |
| (C) Copyright AudioScience Inc. 1998-2010 |
| *******************************************************************************/ |
| #define SOURCEFILE_NAME "hpi6205.c" |
| |
| #include "hpi_internal.h" |
| #include "hpimsginit.h" |
| #include "hpidebug.h" |
| #include "hpi6205.h" |
| #include "hpidspcd.h" |
| #include "hpicmn.h" |
| |
| /*****************************************************************************/ |
| /* HPI6205 specific error codes */ |
| #define HPI6205_ERROR_BASE 1000 /* not actually used anywhere */ |
| |
| /* operational/messaging errors */ |
| #define HPI6205_ERROR_MSG_RESP_IDLE_TIMEOUT 1015 |
| #define HPI6205_ERROR_MSG_RESP_TIMEOUT 1016 |
| |
| /* initialization/bootload errors */ |
| #define HPI6205_ERROR_6205_NO_IRQ 1002 |
| #define HPI6205_ERROR_6205_INIT_FAILED 1003 |
| #define HPI6205_ERROR_6205_REG 1006 |
| #define HPI6205_ERROR_6205_DSPPAGE 1007 |
| #define HPI6205_ERROR_C6713_HPIC 1009 |
| #define HPI6205_ERROR_C6713_HPIA 1010 |
| #define HPI6205_ERROR_C6713_PLL 1011 |
| #define HPI6205_ERROR_DSP_INTMEM 1012 |
| #define HPI6205_ERROR_DSP_EXTMEM 1013 |
| #define HPI6205_ERROR_DSP_PLD 1014 |
| #define HPI6205_ERROR_6205_EEPROM 1017 |
| #define HPI6205_ERROR_DSP_EMIF 1018 |
| |
| /*****************************************************************************/ |
| /* for C6205 PCI i/f */ |
| /* Host Status Register (HSR) bitfields */ |
| #define C6205_HSR_INTSRC 0x01 |
| #define C6205_HSR_INTAVAL 0x02 |
| #define C6205_HSR_INTAM 0x04 |
| #define C6205_HSR_CFGERR 0x08 |
| #define C6205_HSR_EEREAD 0x10 |
| /* Host-to-DSP Control Register (HDCR) bitfields */ |
| #define C6205_HDCR_WARMRESET 0x01 |
| #define C6205_HDCR_DSPINT 0x02 |
| #define C6205_HDCR_PCIBOOT 0x04 |
| /* DSP Page Register (DSPP) bitfields, */ |
| /* defines 4 Mbyte page that BAR0 points to */ |
| #define C6205_DSPP_MAP1 0x400 |
| |
| /* BAR0 maps to prefetchable 4 Mbyte memory block set by DSPP. |
| * BAR1 maps to non-prefetchable 8 Mbyte memory block |
| * of DSP memory mapped registers (starting at 0x01800000). |
| * 0x01800000 is hardcoded in the PCI i/f, so that only the offset from this |
| * needs to be added to the BAR1 base address set in the PCI config reg |
| */ |
| #define C6205_BAR1_PCI_IO_OFFSET (0x027FFF0L) |
| #define C6205_BAR1_HSR (C6205_BAR1_PCI_IO_OFFSET) |
| #define C6205_BAR1_HDCR (C6205_BAR1_PCI_IO_OFFSET+4) |
| #define C6205_BAR1_DSPP (C6205_BAR1_PCI_IO_OFFSET+8) |
| |
| /* used to control LED (revA) and reset C6713 (revB) */ |
| #define C6205_BAR0_TIMER1_CTL (0x01980000L) |
| |
| /* For first 6713 in CE1 space, using DA17,16,2 */ |
| #define HPICL_ADDR 0x01400000L |
| #define HPICH_ADDR 0x01400004L |
| #define HPIAL_ADDR 0x01410000L |
| #define HPIAH_ADDR 0x01410004L |
| #define HPIDIL_ADDR 0x01420000L |
| #define HPIDIH_ADDR 0x01420004L |
| #define HPIDL_ADDR 0x01430000L |
| #define HPIDH_ADDR 0x01430004L |
| |
| #define C6713_EMIF_GCTL 0x01800000 |
| #define C6713_EMIF_CE1 0x01800004 |
| #define C6713_EMIF_CE0 0x01800008 |
| #define C6713_EMIF_CE2 0x01800010 |
| #define C6713_EMIF_CE3 0x01800014 |
| #define C6713_EMIF_SDRAMCTL 0x01800018 |
| #define C6713_EMIF_SDRAMTIMING 0x0180001C |
| #define C6713_EMIF_SDRAMEXT 0x01800020 |
| |
| struct hpi_hw_obj { |
| /* PCI registers */ |
| __iomem u32 *prHSR; |
| __iomem u32 *prHDCR; |
| __iomem u32 *prDSPP; |
| |
| u32 dsp_page; |
| |
| struct consistent_dma_area h_locked_mem; |
| struct bus_master_interface *p_interface_buffer; |
| |
| u16 flag_outstream_just_reset[HPI_MAX_STREAMS]; |
| /* a non-NULL handle means there is an HPI allocated buffer */ |
| struct consistent_dma_area instream_host_buffers[HPI_MAX_STREAMS]; |
| struct consistent_dma_area outstream_host_buffers[HPI_MAX_STREAMS]; |
| /* non-zero size means a buffer exists, may be external */ |
| u32 instream_host_buffer_size[HPI_MAX_STREAMS]; |
| u32 outstream_host_buffer_size[HPI_MAX_STREAMS]; |
| |
| struct consistent_dma_area h_control_cache; |
| struct hpi_control_cache *p_cache; |
| }; |
| |
| /*****************************************************************************/ |
| /* local prototypes */ |
| |
| #define check_before_bbm_copy(status, p_bbm_data, l_first_write, l_second_write) |
| |
| static int wait_dsp_ack(struct hpi_hw_obj *phw, int state, int timeout_us); |
| |
| static void send_dsp_command(struct hpi_hw_obj *phw, int cmd); |
| |
| static u16 adapter_boot_load_dsp(struct hpi_adapter_obj *pao, |
| u32 *pos_error_code); |
| |
| static u16 message_response_sequence(struct hpi_adapter_obj *pao, |
| struct hpi_message *phm, struct hpi_response *phr); |
| |
| static void hw_message(struct hpi_adapter_obj *pao, struct hpi_message *phm, |
| struct hpi_response *phr); |
| |
| #define HPI6205_TIMEOUT 1000000 |
| |
| static void subsys_create_adapter(struct hpi_message *phm, |
| struct hpi_response *phr); |
| static void adapter_delete(struct hpi_adapter_obj *pao, |
| struct hpi_message *phm, struct hpi_response *phr); |
| |
| static u16 create_adapter_obj(struct hpi_adapter_obj *pao, |
| u32 *pos_error_code); |
| |
| static void delete_adapter_obj(struct hpi_adapter_obj *pao); |
| |
| static void outstream_host_buffer_allocate(struct hpi_adapter_obj *pao, |
| struct hpi_message *phm, struct hpi_response *phr); |
| |
| static void outstream_host_buffer_get_info(struct hpi_adapter_obj *pao, |
| struct hpi_message *phm, struct hpi_response *phr); |
| |
| static void outstream_host_buffer_free(struct hpi_adapter_obj *pao, |
| struct hpi_message *phm, struct hpi_response *phr); |
| static void outstream_write(struct hpi_adapter_obj *pao, |
| struct hpi_message *phm, struct hpi_response *phr); |
| |
| static void outstream_get_info(struct hpi_adapter_obj *pao, |
| struct hpi_message *phm, struct hpi_response *phr); |
| |
| static void outstream_start(struct hpi_adapter_obj *pao, |
| struct hpi_message *phm, struct hpi_response *phr); |
| |
| static void outstream_open(struct hpi_adapter_obj *pao, |
| struct hpi_message *phm, struct hpi_response *phr); |
| |
| static void outstream_reset(struct hpi_adapter_obj *pao, |
| struct hpi_message *phm, struct hpi_response *phr); |
| |
| static void instream_host_buffer_allocate(struct hpi_adapter_obj *pao, |
| struct hpi_message *phm, struct hpi_response *phr); |
| |
| static void instream_host_buffer_get_info(struct hpi_adapter_obj *pao, |
| struct hpi_message *phm, struct hpi_response *phr); |
| |
| static void instream_host_buffer_free(struct hpi_adapter_obj *pao, |
| struct hpi_message *phm, struct hpi_response *phr); |
| |
| static void instream_read(struct hpi_adapter_obj *pao, |
| struct hpi_message *phm, struct hpi_response *phr); |
| |
| static void instream_get_info(struct hpi_adapter_obj *pao, |
| struct hpi_message *phm, struct hpi_response *phr); |
| |
| static void instream_start(struct hpi_adapter_obj *pao, |
| struct hpi_message *phm, struct hpi_response *phr); |
| |
| static u32 boot_loader_read_mem32(struct hpi_adapter_obj *pao, int dsp_index, |
| u32 address); |
| |
| static void boot_loader_write_mem32(struct hpi_adapter_obj *pao, |
| int dsp_index, u32 address, u32 data); |
| |
| static u16 boot_loader_config_emif(struct hpi_adapter_obj *pao, |
| int dsp_index); |
| |
| static u16 boot_loader_test_memory(struct hpi_adapter_obj *pao, int dsp_index, |
| u32 address, u32 length); |
| |
| static u16 boot_loader_test_internal_memory(struct hpi_adapter_obj *pao, |
| int dsp_index); |
| |
| static u16 boot_loader_test_external_memory(struct hpi_adapter_obj *pao, |
| int dsp_index); |
| |
| static u16 boot_loader_test_pld(struct hpi_adapter_obj *pao, int dsp_index); |
| |
| /*****************************************************************************/ |
| |
| static void subsys_message(struct hpi_adapter_obj *pao, |
| struct hpi_message *phm, struct hpi_response *phr) |
| { |
| switch (phm->function) { |
| case HPI_SUBSYS_CREATE_ADAPTER: |
| subsys_create_adapter(phm, phr); |
| break; |
| default: |
| phr->error = HPI_ERROR_INVALID_FUNC; |
| break; |
| } |
| } |
| |
| static void control_message(struct hpi_adapter_obj *pao, |
| struct hpi_message *phm, struct hpi_response *phr) |
| { |
| |
| struct hpi_hw_obj *phw = pao->priv; |
| u16 pending_cache_error = 0; |
| |
| switch (phm->function) { |
| case HPI_CONTROL_GET_STATE: |
| if (pao->has_control_cache) { |
| rmb(); /* make sure we see updates DMAed from DSP */ |
| if (hpi_check_control_cache(phw->p_cache, phm, phr)) { |
| break; |
| } else if (phm->u.c.attribute == HPI_METER_PEAK) { |
| pending_cache_error = |
| HPI_ERROR_CONTROL_CACHING; |
| } |
| } |
| hw_message(pao, phm, phr); |
| if (pending_cache_error && !phr->error) |
| phr->error = pending_cache_error; |
| break; |
| case HPI_CONTROL_GET_INFO: |
| hw_message(pao, phm, phr); |
| break; |
| case HPI_CONTROL_SET_STATE: |
| hw_message(pao, phm, phr); |
| if (pao->has_control_cache) |
| hpi_cmn_control_cache_sync_to_msg(phw->p_cache, phm, |
| phr); |
| break; |
| default: |
| phr->error = HPI_ERROR_INVALID_FUNC; |
| break; |
| } |
| } |
| |
| static void adapter_message(struct hpi_adapter_obj *pao, |
| struct hpi_message *phm, struct hpi_response *phr) |
| { |
| switch (phm->function) { |
| case HPI_ADAPTER_DELETE: |
| adapter_delete(pao, phm, phr); |
| break; |
| |
| default: |
| hw_message(pao, phm, phr); |
| break; |
| } |
| } |
| |
| static void outstream_message(struct hpi_adapter_obj *pao, |
| struct hpi_message *phm, struct hpi_response *phr) |
| { |
| |
| if (phm->obj_index >= HPI_MAX_STREAMS) { |
| phr->error = HPI_ERROR_INVALID_OBJ_INDEX; |
| HPI_DEBUG_LOG(WARNING, |
| "Message referencing invalid stream %d " |
| "on adapter index %d\n", phm->obj_index, |
| phm->adapter_index); |
| return; |
| } |
| |
| switch (phm->function) { |
| case HPI_OSTREAM_WRITE: |
| outstream_write(pao, phm, phr); |
| break; |
| case HPI_OSTREAM_GET_INFO: |
| outstream_get_info(pao, phm, phr); |
| break; |
| case HPI_OSTREAM_HOSTBUFFER_ALLOC: |
| outstream_host_buffer_allocate(pao, phm, phr); |
| break; |
| case HPI_OSTREAM_HOSTBUFFER_GET_INFO: |
| outstream_host_buffer_get_info(pao, phm, phr); |
| break; |
| case HPI_OSTREAM_HOSTBUFFER_FREE: |
| outstream_host_buffer_free(pao, phm, phr); |
| break; |
| case HPI_OSTREAM_START: |
| outstream_start(pao, phm, phr); |
| break; |
| case HPI_OSTREAM_OPEN: |
| outstream_open(pao, phm, phr); |
| break; |
| case HPI_OSTREAM_RESET: |
| outstream_reset(pao, phm, phr); |
| break; |
| default: |
| hw_message(pao, phm, phr); |
| break; |
| } |
| } |
| |
| static void instream_message(struct hpi_adapter_obj *pao, |
| struct hpi_message *phm, struct hpi_response *phr) |
| { |
| |
| if (phm->obj_index >= HPI_MAX_STREAMS) { |
| phr->error = HPI_ERROR_INVALID_OBJ_INDEX; |
| HPI_DEBUG_LOG(WARNING, |
| "Message referencing invalid stream %d " |
| "on adapter index %d\n", phm->obj_index, |
| phm->adapter_index); |
| return; |
| } |
| |
| switch (phm->function) { |
| case HPI_ISTREAM_READ: |
| instream_read(pao, phm, phr); |
| break; |
| case HPI_ISTREAM_GET_INFO: |
| instream_get_info(pao, phm, phr); |
| break; |
| case HPI_ISTREAM_HOSTBUFFER_ALLOC: |
| instream_host_buffer_allocate(pao, phm, phr); |
| break; |
| case HPI_ISTREAM_HOSTBUFFER_GET_INFO: |
| instream_host_buffer_get_info(pao, phm, phr); |
| break; |
| case HPI_ISTREAM_HOSTBUFFER_FREE: |
| instream_host_buffer_free(pao, phm, phr); |
| break; |
| case HPI_ISTREAM_START: |
| instream_start(pao, phm, phr); |
| break; |
| default: |
| hw_message(pao, phm, phr); |
| break; |
| } |
| } |
| |
| /*****************************************************************************/ |
| /** Entry point to this HPI backend |
| * All calls to the HPI start here |
| */ |
| void _HPI_6205(struct hpi_adapter_obj *pao, struct hpi_message *phm, |
| struct hpi_response *phr) |
| { |
| if (pao && (pao->dsp_crashed >= 10) |
| && (phm->function != HPI_ADAPTER_DEBUG_READ)) { |
| /* allow last resort debug read even after crash */ |
| hpi_init_response(phr, phm->object, phm->function, |
| HPI_ERROR_DSP_HARDWARE); |
| HPI_DEBUG_LOG(WARNING, " %d,%d dsp crashed.\n", phm->object, |
| phm->function); |
| return; |
| } |
| |
| /* Init default response */ |
| if (phm->function != HPI_SUBSYS_CREATE_ADAPTER) |
| phr->error = HPI_ERROR_PROCESSING_MESSAGE; |
| |
| HPI_DEBUG_LOG(VERBOSE, "start of switch\n"); |
| switch (phm->type) { |
| case HPI_TYPE_REQUEST: |
| switch (phm->object) { |
| case HPI_OBJ_SUBSYSTEM: |
| subsys_message(pao, phm, phr); |
| break; |
| |
| case HPI_OBJ_ADAPTER: |
| adapter_message(pao, phm, phr); |
| break; |
| |
| case HPI_OBJ_CONTROL: |
| control_message(pao, phm, phr); |
| break; |
| |
| case HPI_OBJ_OSTREAM: |
| outstream_message(pao, phm, phr); |
| break; |
| |
| case HPI_OBJ_ISTREAM: |
| instream_message(pao, phm, phr); |
| break; |
| |
| default: |
| hw_message(pao, phm, phr); |
| break; |
| } |
| break; |
| |
| default: |
| phr->error = HPI_ERROR_INVALID_TYPE; |
| break; |
| } |
| } |
| |
| void HPI_6205(struct hpi_message *phm, struct hpi_response *phr) |
| { |
| struct hpi_adapter_obj *pao = NULL; |
| |
| if (phm->object != HPI_OBJ_SUBSYSTEM) { |
| /* normal messages must have valid adapter index */ |
| pao = hpi_find_adapter(phm->adapter_index); |
| } else { |
| /* subsys messages don't address an adapter */ |
| _HPI_6205(NULL, phm, phr); |
| return; |
| } |
| |
| if (pao) |
| _HPI_6205(pao, phm, phr); |
| else |
| hpi_init_response(phr, phm->object, phm->function, |
| HPI_ERROR_BAD_ADAPTER_NUMBER); |
| } |
| |
| /*****************************************************************************/ |
| /* SUBSYSTEM */ |
| |
| /** Create an adapter object and initialise it based on resource information |
| * passed in in the message |
| * *** NOTE - you cannot use this function AND the FindAdapters function at the |
| * same time, the application must use only one of them to get the adapters *** |
| */ |
| static void subsys_create_adapter(struct hpi_message *phm, |
| struct hpi_response *phr) |
| { |
| /* create temp adapter obj, because we don't know what index yet */ |
| struct hpi_adapter_obj ao; |
| u32 os_error_code; |
| u16 err; |
| |
| HPI_DEBUG_LOG(DEBUG, " subsys_create_adapter\n"); |
| |
| memset(&ao, 0, sizeof(ao)); |
| |
| ao.priv = kzalloc(sizeof(struct hpi_hw_obj), GFP_KERNEL); |
| if (!ao.priv) { |
| HPI_DEBUG_LOG(ERROR, "can't get mem for adapter object\n"); |
| phr->error = HPI_ERROR_MEMORY_ALLOC; |
| return; |
| } |
| |
| ao.pci = *phm->u.s.resource.r.pci; |
| err = create_adapter_obj(&ao, &os_error_code); |
| if (err) { |
| delete_adapter_obj(&ao); |
| if (err >= HPI_ERROR_BACKEND_BASE) { |
| phr->error = HPI_ERROR_DSP_BOOTLOAD; |
| phr->specific_error = err; |
| } else { |
| phr->error = err; |
| } |
| phr->u.s.data = os_error_code; |
| return; |
| } |
| |
| phr->u.s.adapter_type = ao.adapter_type; |
| phr->u.s.adapter_index = ao.index; |
| phr->error = 0; |
| } |
| |
| /** delete an adapter - required by WDM driver */ |
| static void adapter_delete(struct hpi_adapter_obj *pao, |
| struct hpi_message *phm, struct hpi_response *phr) |
| { |
| struct hpi_hw_obj *phw; |
| |
| if (!pao) { |
| phr->error = HPI_ERROR_INVALID_OBJ_INDEX; |
| return; |
| } |
| phw = (struct hpi_hw_obj *)pao->priv; |
| /* reset adapter h/w */ |
| /* Reset C6713 #1 */ |
| boot_loader_write_mem32(pao, 0, C6205_BAR0_TIMER1_CTL, 0); |
| /* reset C6205 */ |
| iowrite32(C6205_HDCR_WARMRESET, phw->prHDCR); |
| |
| delete_adapter_obj(pao); |
| hpi_delete_adapter(pao); |
| phr->error = 0; |
| } |
| |
| /** Create adapter object |
| allocate buffers, bootload DSPs, initialise control cache |
| */ |
| static u16 create_adapter_obj(struct hpi_adapter_obj *pao, |
| u32 *pos_error_code) |
| { |
| struct hpi_hw_obj *phw = pao->priv; |
| struct bus_master_interface *interface; |
| u32 phys_addr; |
| int i; |
| u16 err; |
| |
| /* init error reporting */ |
| pao->dsp_crashed = 0; |
| |
| for (i = 0; i < HPI_MAX_STREAMS; i++) |
| phw->flag_outstream_just_reset[i] = 1; |
| |
| /* The C6205 memory area 1 is 8Mbyte window into DSP registers */ |
| phw->prHSR = |
| pao->pci.ap_mem_base[1] + |
| C6205_BAR1_HSR / sizeof(*pao->pci.ap_mem_base[1]); |
| phw->prHDCR = |
| pao->pci.ap_mem_base[1] + |
| C6205_BAR1_HDCR / sizeof(*pao->pci.ap_mem_base[1]); |
| phw->prDSPP = |
| pao->pci.ap_mem_base[1] + |
| C6205_BAR1_DSPP / sizeof(*pao->pci.ap_mem_base[1]); |
| |
| pao->has_control_cache = 0; |
| |
| if (hpios_locked_mem_alloc(&phw->h_locked_mem, |
| sizeof(struct bus_master_interface), |
| pao->pci.pci_dev)) |
| phw->p_interface_buffer = NULL; |
| else if (hpios_locked_mem_get_virt_addr(&phw->h_locked_mem, |
| (void *)&phw->p_interface_buffer)) |
| phw->p_interface_buffer = NULL; |
| |
| HPI_DEBUG_LOG(DEBUG, "interface buffer address %p\n", |
| phw->p_interface_buffer); |
| |
| if (phw->p_interface_buffer) { |
| memset((void *)phw->p_interface_buffer, 0, |
| sizeof(struct bus_master_interface)); |
| phw->p_interface_buffer->dsp_ack = H620_HIF_UNKNOWN; |
| } |
| |
| err = adapter_boot_load_dsp(pao, pos_error_code); |
| if (err) { |
| HPI_DEBUG_LOG(ERROR, "DSP code load failed\n"); |
| /* no need to clean up as SubSysCreateAdapter */ |
| /* calls DeleteAdapter on error. */ |
| return err; |
| } |
| HPI_DEBUG_LOG(INFO, "load DSP code OK\n"); |
| |
| /* allow boot load even if mem alloc wont work */ |
| if (!phw->p_interface_buffer) |
| return HPI_ERROR_MEMORY_ALLOC; |
| |
| interface = phw->p_interface_buffer; |
| |
| /* make sure the DSP has started ok */ |
| if (!wait_dsp_ack(phw, H620_HIF_RESET, HPI6205_TIMEOUT * 10)) { |
| HPI_DEBUG_LOG(ERROR, "timed out waiting reset state \n"); |
| return HPI6205_ERROR_6205_INIT_FAILED; |
| } |
| /* Note that *pao, *phw are zeroed after allocation, |
| * so pointers and flags are NULL by default. |
| * Allocate bus mastering control cache buffer and tell the DSP about it |
| */ |
| if (interface->control_cache.number_of_controls) { |
| u8 *p_control_cache_virtual; |
| |
| err = hpios_locked_mem_alloc(&phw->h_control_cache, |
| interface->control_cache.size_in_bytes, |
| pao->pci.pci_dev); |
| if (!err) |
| err = hpios_locked_mem_get_virt_addr(&phw-> |
| h_control_cache, |
| (void *)&p_control_cache_virtual); |
| if (!err) { |
| memset(p_control_cache_virtual, 0, |
| interface->control_cache.size_in_bytes); |
| |
| phw->p_cache = |
| hpi_alloc_control_cache(interface-> |
| control_cache.number_of_controls, |
| interface->control_cache.size_in_bytes, |
| p_control_cache_virtual); |
| |
| if (!phw->p_cache) |
| err = HPI_ERROR_MEMORY_ALLOC; |
| } |
| if (!err) { |
| err = hpios_locked_mem_get_phys_addr(&phw-> |
| h_control_cache, &phys_addr); |
| interface->control_cache.physical_address32 = |
| phys_addr; |
| } |
| |
| if (!err) |
| pao->has_control_cache = 1; |
| else { |
| if (hpios_locked_mem_valid(&phw->h_control_cache)) |
| hpios_locked_mem_free(&phw->h_control_cache); |
| pao->has_control_cache = 0; |
| } |
| } |
| send_dsp_command(phw, H620_HIF_IDLE); |
| |
| { |
| struct hpi_message hm; |
| struct hpi_response hr; |
| u32 max_streams; |
| |
| HPI_DEBUG_LOG(VERBOSE, "init ADAPTER_GET_INFO\n"); |
| memset(&hm, 0, sizeof(hm)); |
| /* wAdapterIndex == version == 0 */ |
| hm.type = HPI_TYPE_REQUEST; |
| hm.size = sizeof(hm); |
| hm.object = HPI_OBJ_ADAPTER; |
| hm.function = HPI_ADAPTER_GET_INFO; |
| |
| memset(&hr, 0, sizeof(hr)); |
| hr.size = sizeof(hr); |
| |
| err = message_response_sequence(pao, &hm, &hr); |
| if (err) { |
| HPI_DEBUG_LOG(ERROR, "message transport error %d\n", |
| err); |
| return err; |
| } |
| if (hr.error) |
| return hr.error; |
| |
| pao->adapter_type = hr.u.ax.info.adapter_type; |
| pao->index = hr.u.ax.info.adapter_index; |
| |
| max_streams = |
| hr.u.ax.info.num_outstreams + |
| hr.u.ax.info.num_instreams; |
| |
| hpios_locked_mem_prepare((max_streams * 6) / 10, max_streams, |
| 65536, pao->pci.pci_dev); |
| |
| HPI_DEBUG_LOG(VERBOSE, |
| "got adapter info type %x index %d serial %d\n", |
| hr.u.ax.info.adapter_type, hr.u.ax.info.adapter_index, |
| hr.u.ax.info.serial_number); |
| } |
| |
| pao->open = 0; /* upon creation the adapter is closed */ |
| |
| if (phw->p_cache) |
| phw->p_cache->adap_idx = pao->index; |
| |
| HPI_DEBUG_LOG(INFO, "bootload DSP OK\n"); |
| |
| return hpi_add_adapter(pao); |
| } |
| |
| /** Free memory areas allocated by adapter |
| * this routine is called from AdapterDelete, |
| * and SubSysCreateAdapter if duplicate index |
| */ |
| static void delete_adapter_obj(struct hpi_adapter_obj *pao) |
| { |
| struct hpi_hw_obj *phw = pao->priv; |
| int i; |
| |
| if (hpios_locked_mem_valid(&phw->h_control_cache)) { |
| hpios_locked_mem_free(&phw->h_control_cache); |
| hpi_free_control_cache(phw->p_cache); |
| } |
| |
| if (hpios_locked_mem_valid(&phw->h_locked_mem)) { |
| hpios_locked_mem_free(&phw->h_locked_mem); |
| phw->p_interface_buffer = NULL; |
| } |
| |
| for (i = 0; i < HPI_MAX_STREAMS; i++) |
| if (hpios_locked_mem_valid(&phw->instream_host_buffers[i])) { |
| hpios_locked_mem_free(&phw->instream_host_buffers[i]); |
| /*?phw->InStreamHostBuffers[i] = NULL; */ |
| phw->instream_host_buffer_size[i] = 0; |
| } |
| |
| for (i = 0; i < HPI_MAX_STREAMS; i++) |
| if (hpios_locked_mem_valid(&phw->outstream_host_buffers[i])) { |
| hpios_locked_mem_free(&phw->outstream_host_buffers |
| [i]); |
| phw->outstream_host_buffer_size[i] = 0; |
| } |
| |
| hpios_locked_mem_unprepare(pao->pci.pci_dev); |
| |
| kfree(phw); |
| } |
| |
| /*****************************************************************************/ |
| /* Adapter functions */ |
| |
| /*****************************************************************************/ |
| /* OutStream Host buffer functions */ |
| |
| /** Allocate or attach buffer for busmastering |
| */ |
| static void outstream_host_buffer_allocate(struct hpi_adapter_obj *pao, |
| struct hpi_message *phm, struct hpi_response *phr) |
| { |
| u16 err = 0; |
| u32 command = phm->u.d.u.buffer.command; |
| struct hpi_hw_obj *phw = pao->priv; |
| struct bus_master_interface *interface = phw->p_interface_buffer; |
| |
| hpi_init_response(phr, phm->object, phm->function, 0); |
| |
| if (command == HPI_BUFFER_CMD_EXTERNAL |
| || command == HPI_BUFFER_CMD_INTERNAL_ALLOC) { |
| /* ALLOC phase, allocate a buffer with power of 2 size, |
| get its bus address for PCI bus mastering |
| */ |
| phm->u.d.u.buffer.buffer_size = |
| roundup_pow_of_two(phm->u.d.u.buffer.buffer_size); |
| /* return old size and allocated size, |
| so caller can detect change */ |
| phr->u.d.u.stream_info.data_available = |
| phw->outstream_host_buffer_size[phm->obj_index]; |
| phr->u.d.u.stream_info.buffer_size = |
| phm->u.d.u.buffer.buffer_size; |
| |
| if (phw->outstream_host_buffer_size[phm->obj_index] == |
| phm->u.d.u.buffer.buffer_size) { |
| /* Same size, no action required */ |
| return; |
| } |
| |
| if (hpios_locked_mem_valid(&phw->outstream_host_buffers[phm-> |
| obj_index])) |
| hpios_locked_mem_free(&phw->outstream_host_buffers |
| [phm->obj_index]); |
| |
| err = hpios_locked_mem_alloc(&phw->outstream_host_buffers |
| [phm->obj_index], phm->u.d.u.buffer.buffer_size, |
| pao->pci.pci_dev); |
| |
| if (err) { |
| phr->error = HPI_ERROR_INVALID_DATASIZE; |
| phw->outstream_host_buffer_size[phm->obj_index] = 0; |
| return; |
| } |
| |
| err = hpios_locked_mem_get_phys_addr |
| (&phw->outstream_host_buffers[phm->obj_index], |
| &phm->u.d.u.buffer.pci_address); |
| /* get the phys addr into msg for single call alloc caller |
| * needs to do this for split alloc (or use the same message) |
| * return the phy address for split alloc in the respose too |
| */ |
| phr->u.d.u.stream_info.auxiliary_data_available = |
| phm->u.d.u.buffer.pci_address; |
| |
| if (err) { |
| hpios_locked_mem_free(&phw->outstream_host_buffers |
| [phm->obj_index]); |
| phw->outstream_host_buffer_size[phm->obj_index] = 0; |
| phr->error = HPI_ERROR_MEMORY_ALLOC; |
| return; |
| } |
| } |
| |
| if (command == HPI_BUFFER_CMD_EXTERNAL |
| || command == HPI_BUFFER_CMD_INTERNAL_GRANTADAPTER) { |
| /* GRANT phase. Set up the BBM status, tell the DSP about |
| the buffer so it can start using BBM. |
| */ |
| struct hpi_hostbuffer_status *status; |
| |
| if (phm->u.d.u.buffer.buffer_size & (phm->u.d.u.buffer. |
| buffer_size - 1)) { |
| HPI_DEBUG_LOG(ERROR, |
| "Buffer size must be 2^N not %d\n", |
| phm->u.d.u.buffer.buffer_size); |
| phr->error = HPI_ERROR_INVALID_DATASIZE; |
| return; |
| } |
| phw->outstream_host_buffer_size[phm->obj_index] = |
| phm->u.d.u.buffer.buffer_size; |
| status = &interface->outstream_host_buffer_status[phm-> |
| obj_index]; |
| status->samples_processed = 0; |
| status->stream_state = HPI_STATE_STOPPED; |
| status->dSP_index = 0; |
| status->host_index = status->dSP_index; |
| status->size_in_bytes = phm->u.d.u.buffer.buffer_size; |
| status->auxiliary_data_available = 0; |
| |
| hw_message(pao, phm, phr); |
| |
| if (phr->error |
| && hpios_locked_mem_valid(&phw-> |
| outstream_host_buffers[phm->obj_index])) { |
| hpios_locked_mem_free(&phw->outstream_host_buffers |
| [phm->obj_index]); |
| phw->outstream_host_buffer_size[phm->obj_index] = 0; |
| } |
| } |
| } |
| |
| static void outstream_host_buffer_get_info(struct hpi_adapter_obj *pao, |
| struct hpi_message *phm, struct hpi_response *phr) |
| { |
| struct hpi_hw_obj *phw = pao->priv; |
| struct bus_master_interface *interface = phw->p_interface_buffer; |
| struct hpi_hostbuffer_status *status; |
| u8 *p_bbm_data; |
| |
| if (hpios_locked_mem_valid(&phw->outstream_host_buffers[phm-> |
| obj_index])) { |
| if (hpios_locked_mem_get_virt_addr(&phw-> |
| outstream_host_buffers[phm->obj_index], |
| (void *)&p_bbm_data)) { |
| phr->error = HPI_ERROR_INVALID_OPERATION; |
| return; |
| } |
| status = &interface->outstream_host_buffer_status[phm-> |
| obj_index]; |
| hpi_init_response(phr, HPI_OBJ_OSTREAM, |
| HPI_OSTREAM_HOSTBUFFER_GET_INFO, 0); |
| phr->u.d.u.hostbuffer_info.p_buffer = p_bbm_data; |
| phr->u.d.u.hostbuffer_info.p_status = status; |
| } else { |
| hpi_init_response(phr, HPI_OBJ_OSTREAM, |
| HPI_OSTREAM_HOSTBUFFER_GET_INFO, |
| HPI_ERROR_INVALID_OPERATION); |
| } |
| } |
| |
| static void outstream_host_buffer_free(struct hpi_adapter_obj *pao, |
| struct hpi_message *phm, struct hpi_response *phr) |
| { |
| struct hpi_hw_obj *phw = pao->priv; |
| u32 command = phm->u.d.u.buffer.command; |
| |
| if (phw->outstream_host_buffer_size[phm->obj_index]) { |
| if (command == HPI_BUFFER_CMD_EXTERNAL |
| || command == HPI_BUFFER_CMD_INTERNAL_REVOKEADAPTER) { |
| phw->outstream_host_buffer_size[phm->obj_index] = 0; |
| hw_message(pao, phm, phr); |
| /* Tell adapter to stop using the host buffer. */ |
| } |
| if (command == HPI_BUFFER_CMD_EXTERNAL |
| || command == HPI_BUFFER_CMD_INTERNAL_FREE) |
| hpios_locked_mem_free(&phw->outstream_host_buffers |
| [phm->obj_index]); |
| } |
| /* Should HPI_ERROR_INVALID_OPERATION be returned |
| if no host buffer is allocated? */ |
| else |
| hpi_init_response(phr, HPI_OBJ_OSTREAM, |
| HPI_OSTREAM_HOSTBUFFER_FREE, 0); |
| |
| } |
| |
| static u32 outstream_get_space_available(struct hpi_hostbuffer_status *status) |
| { |
| return status->size_in_bytes - (status->host_index - |
| status->dSP_index); |
| } |
| |
| static void outstream_write(struct hpi_adapter_obj *pao, |
| struct hpi_message *phm, struct hpi_response *phr) |
| { |
| struct hpi_hw_obj *phw = pao->priv; |
| struct bus_master_interface *interface = phw->p_interface_buffer; |
| struct hpi_hostbuffer_status *status; |
| u32 space_available; |
| |
| if (!phw->outstream_host_buffer_size[phm->obj_index]) { |
| /* there is no BBM buffer, write via message */ |
| hw_message(pao, phm, phr); |
| return; |
| } |
| |
| hpi_init_response(phr, phm->object, phm->function, 0); |
| status = &interface->outstream_host_buffer_status[phm->obj_index]; |
| |
| space_available = outstream_get_space_available(status); |
| if (space_available < phm->u.d.u.data.data_size) { |
| phr->error = HPI_ERROR_INVALID_DATASIZE; |
| return; |
| } |
| |
| /* HostBuffers is used to indicate host buffer is internally allocated. |
| otherwise, assumed external, data written externally */ |
| if (phm->u.d.u.data.pb_data |
| && hpios_locked_mem_valid(&phw->outstream_host_buffers[phm-> |
| obj_index])) { |
| u8 *p_bbm_data; |
| u32 l_first_write; |
| u8 *p_app_data = (u8 *)phm->u.d.u.data.pb_data; |
| |
| if (hpios_locked_mem_get_virt_addr(&phw-> |
| outstream_host_buffers[phm->obj_index], |
| (void *)&p_bbm_data)) { |
| phr->error = HPI_ERROR_INVALID_OPERATION; |
| return; |
| } |
| |
| /* either all data, |
| or enough to fit from current to end of BBM buffer */ |
| l_first_write = |
| min(phm->u.d.u.data.data_size, |
| status->size_in_bytes - |
| (status->host_index & (status->size_in_bytes - 1))); |
| |
| memcpy(p_bbm_data + |
| (status->host_index & (status->size_in_bytes - 1)), |
| p_app_data, l_first_write); |
| /* remaining data if any */ |
| memcpy(p_bbm_data, p_app_data + l_first_write, |
| phm->u.d.u.data.data_size - l_first_write); |
| } |
| |
| /* |
| * This version relies on the DSP code triggering an OStream buffer |
| * update immediately following a SET_FORMAT call. The host has |
| * already written data into the BBM buffer, but the DSP won't know |
| * about it until dwHostIndex is adjusted. |
| */ |
| if (phw->flag_outstream_just_reset[phm->obj_index]) { |
| /* Format can only change after reset. Must tell DSP. */ |
| u16 function = phm->function; |
| phw->flag_outstream_just_reset[phm->obj_index] = 0; |
| phm->function = HPI_OSTREAM_SET_FORMAT; |
| hw_message(pao, phm, phr); /* send the format to the DSP */ |
| phm->function = function; |
| if (phr->error) |
| return; |
| } |
| |
| status->host_index += phm->u.d.u.data.data_size; |
| } |
| |
| static void outstream_get_info(struct hpi_adapter_obj *pao, |
| struct hpi_message *phm, struct hpi_response *phr) |
| { |
| struct hpi_hw_obj *phw = pao->priv; |
| struct bus_master_interface *interface = phw->p_interface_buffer; |
| struct hpi_hostbuffer_status *status; |
| |
| if (!phw->outstream_host_buffer_size[phm->obj_index]) { |
| hw_message(pao, phm, phr); |
| return; |
| } |
| |
| hpi_init_response(phr, phm->object, phm->function, 0); |
| |
| status = &interface->outstream_host_buffer_status[phm->obj_index]; |
| |
| phr->u.d.u.stream_info.state = (u16)status->stream_state; |
| phr->u.d.u.stream_info.samples_transferred = |
| status->samples_processed; |
| phr->u.d.u.stream_info.buffer_size = status->size_in_bytes; |
| phr->u.d.u.stream_info.data_available = |
| status->size_in_bytes - outstream_get_space_available(status); |
| phr->u.d.u.stream_info.auxiliary_data_available = |
| status->auxiliary_data_available; |
| } |
| |
| static void outstream_start(struct hpi_adapter_obj *pao, |
| struct hpi_message *phm, struct hpi_response *phr) |
| { |
| hw_message(pao, phm, phr); |
| } |
| |
| static void outstream_reset(struct hpi_adapter_obj *pao, |
| struct hpi_message *phm, struct hpi_response *phr) |
| { |
| struct hpi_hw_obj *phw = pao->priv; |
| phw->flag_outstream_just_reset[phm->obj_index] = 1; |
| hw_message(pao, phm, phr); |
| } |
| |
| static void outstream_open(struct hpi_adapter_obj *pao, |
| struct hpi_message *phm, struct hpi_response *phr) |
| { |
| outstream_reset(pao, phm, phr); |
| } |
| |
| /*****************************************************************************/ |
| /* InStream Host buffer functions */ |
| |
| static void instream_host_buffer_allocate(struct hpi_adapter_obj *pao, |
| struct hpi_message *phm, struct hpi_response *phr) |
| { |
| u16 err = 0; |
| u32 command = phm->u.d.u.buffer.command; |
| struct hpi_hw_obj *phw = pao->priv; |
| struct bus_master_interface *interface = phw->p_interface_buffer; |
| |
| hpi_init_response(phr, phm->object, phm->function, 0); |
| |
| if (command == HPI_BUFFER_CMD_EXTERNAL |
| || command == HPI_BUFFER_CMD_INTERNAL_ALLOC) { |
| |
| phm->u.d.u.buffer.buffer_size = |
| roundup_pow_of_two(phm->u.d.u.buffer.buffer_size); |
| phr->u.d.u.stream_info.data_available = |
| phw->instream_host_buffer_size[phm->obj_index]; |
| phr->u.d.u.stream_info.buffer_size = |
| phm->u.d.u.buffer.buffer_size; |
| |
| if (phw->instream_host_buffer_size[phm->obj_index] == |
| phm->u.d.u.buffer.buffer_size) { |
| /* Same size, no action required */ |
| return; |
| } |
| |
| if (hpios_locked_mem_valid(&phw->instream_host_buffers[phm-> |
| obj_index])) |
| hpios_locked_mem_free(&phw->instream_host_buffers |
| [phm->obj_index]); |
| |
| err = hpios_locked_mem_alloc(&phw->instream_host_buffers[phm-> |
| obj_index], phm->u.d.u.buffer.buffer_size, |
| pao->pci.pci_dev); |
| |
| if (err) { |
| phr->error = HPI_ERROR_INVALID_DATASIZE; |
| phw->instream_host_buffer_size[phm->obj_index] = 0; |
| return; |
| } |
| |
| err = hpios_locked_mem_get_phys_addr |
| (&phw->instream_host_buffers[phm->obj_index], |
| &phm->u.d.u.buffer.pci_address); |
| /* get the phys addr into msg for single call alloc. Caller |
| needs to do this for split alloc so return the phy address */ |
| phr->u.d.u.stream_info.auxiliary_data_available = |
| phm->u.d.u.buffer.pci_address; |
| if (err) { |
| hpios_locked_mem_free(&phw->instream_host_buffers |
| [phm->obj_index]); |
| phw->instream_host_buffer_size[phm->obj_index] = 0; |
| phr->error = HPI_ERROR_MEMORY_ALLOC; |
| return; |
| } |
| } |
| |
| if (command == HPI_BUFFER_CMD_EXTERNAL |
| || command == HPI_BUFFER_CMD_INTERNAL_GRANTADAPTER) { |
| struct hpi_hostbuffer_status *status; |
| |
| if (phm->u.d.u.buffer.buffer_size & (phm->u.d.u.buffer. |
| buffer_size - 1)) { |
| HPI_DEBUG_LOG(ERROR, |
| "Buffer size must be 2^N not %d\n", |
| phm->u.d.u.buffer.buffer_size); |
| phr->error = HPI_ERROR_INVALID_DATASIZE; |
| return; |
| } |
| |
| phw->instream_host_buffer_size[phm->obj_index] = |
| phm->u.d.u.buffer.buffer_size; |
| status = &interface->instream_host_buffer_status[phm-> |
| obj_index]; |
| status->samples_processed = 0; |
| status->stream_state = HPI_STATE_STOPPED; |
| status->dSP_index = 0; |
| status->host_index = status->dSP_index; |
| status->size_in_bytes = phm->u.d.u.buffer.buffer_size; |
| status->auxiliary_data_available = 0; |
| |
| hw_message(pao, phm, phr); |
| |
| if (phr->error |
| && hpios_locked_mem_valid(&phw-> |
| instream_host_buffers[phm->obj_index])) { |
| hpios_locked_mem_free(&phw->instream_host_buffers |
| [phm->obj_index]); |
| phw->instream_host_buffer_size[phm->obj_index] = 0; |
| } |
| } |
| } |
| |
| static void instream_host_buffer_get_info(struct hpi_adapter_obj *pao, |
| struct hpi_message *phm, struct hpi_response *phr) |
| { |
| struct hpi_hw_obj *phw = pao->priv; |
| struct bus_master_interface *interface = phw->p_interface_buffer; |
| struct hpi_hostbuffer_status *status; |
| u8 *p_bbm_data; |
| |
| if (hpios_locked_mem_valid(&phw->instream_host_buffers[phm-> |
| obj_index])) { |
| if (hpios_locked_mem_get_virt_addr(&phw-> |
| instream_host_buffers[phm->obj_index], |
| (void *)&p_bbm_data)) { |
| phr->error = HPI_ERROR_INVALID_OPERATION; |
| return; |
| } |
| status = &interface->instream_host_buffer_status[phm-> |
| obj_index]; |
| hpi_init_response(phr, HPI_OBJ_ISTREAM, |
| HPI_ISTREAM_HOSTBUFFER_GET_INFO, 0); |
| phr->u.d.u.hostbuffer_info.p_buffer = p_bbm_data; |
| phr->u.d.u.hostbuffer_info.p_status = status; |
| } else { |
| hpi_init_response(phr, HPI_OBJ_ISTREAM, |
| HPI_ISTREAM_HOSTBUFFER_GET_INFO, |
| HPI_ERROR_INVALID_OPERATION); |
| } |
| } |
| |
| static void instream_host_buffer_free(struct hpi_adapter_obj *pao, |
| struct hpi_message *phm, struct hpi_response *phr) |
| { |
| struct hpi_hw_obj *phw = pao->priv; |
| u32 command = phm->u.d.u.buffer.command; |
| |
| if (phw->instream_host_buffer_size[phm->obj_index]) { |
| if (command == HPI_BUFFER_CMD_EXTERNAL |
| || command == HPI_BUFFER_CMD_INTERNAL_REVOKEADAPTER) { |
| phw->instream_host_buffer_size[phm->obj_index] = 0; |
| hw_message(pao, phm, phr); |
| } |
| |
| if (command == HPI_BUFFER_CMD_EXTERNAL |
| || command == HPI_BUFFER_CMD_INTERNAL_FREE) |
| hpios_locked_mem_free(&phw->instream_host_buffers |
| [phm->obj_index]); |
| |
| } else { |
| /* Should HPI_ERROR_INVALID_OPERATION be returned |
| if no host buffer is allocated? */ |
| hpi_init_response(phr, HPI_OBJ_ISTREAM, |
| HPI_ISTREAM_HOSTBUFFER_FREE, 0); |
| |
| } |
| |
| } |
| |
| static void instream_start(struct hpi_adapter_obj *pao, |
| struct hpi_message *phm, struct hpi_response *phr) |
| { |
| hw_message(pao, phm, phr); |
| } |
| |
| static u32 instream_get_bytes_available(struct hpi_hostbuffer_status *status) |
| { |
| return status->dSP_index - status->host_index; |
| } |
| |
| static void instream_read(struct hpi_adapter_obj *pao, |
| struct hpi_message *phm, struct hpi_response *phr) |
| { |
| struct hpi_hw_obj *phw = pao->priv; |
| struct bus_master_interface *interface = phw->p_interface_buffer; |
| struct hpi_hostbuffer_status *status; |
| u32 data_available; |
| u8 *p_bbm_data; |
| u32 l_first_read; |
| u8 *p_app_data = (u8 *)phm->u.d.u.data.pb_data; |
| |
| if (!phw->instream_host_buffer_size[phm->obj_index]) { |
| hw_message(pao, phm, phr); |
| return; |
| } |
| hpi_init_response(phr, phm->object, phm->function, 0); |
| |
| status = &interface->instream_host_buffer_status[phm->obj_index]; |
| data_available = instream_get_bytes_available(status); |
| if (data_available < phm->u.d.u.data.data_size) { |
| phr->error = HPI_ERROR_INVALID_DATASIZE; |
| return; |
| } |
| |
| if (hpios_locked_mem_valid(&phw->instream_host_buffers[phm-> |
| obj_index])) { |
| if (hpios_locked_mem_get_virt_addr(&phw-> |
| instream_host_buffers[phm->obj_index], |
| (void *)&p_bbm_data)) { |
| phr->error = HPI_ERROR_INVALID_OPERATION; |
| return; |
| } |
| |
| /* either all data, |
| or enough to fit from current to end of BBM buffer */ |
| l_first_read = |
| min(phm->u.d.u.data.data_size, |
| status->size_in_bytes - |
| (status->host_index & (status->size_in_bytes - 1))); |
| |
| memcpy(p_app_data, |
| p_bbm_data + |
| (status->host_index & (status->size_in_bytes - 1)), |
| l_first_read); |
| /* remaining data if any */ |
| memcpy(p_app_data + l_first_read, p_bbm_data, |
| phm->u.d.u.data.data_size - l_first_read); |
| } |
| status->host_index += phm->u.d.u.data.data_size; |
| } |
| |
| static void instream_get_info(struct hpi_adapter_obj *pao, |
| struct hpi_message *phm, struct hpi_response *phr) |
| { |
| struct hpi_hw_obj *phw = pao->priv; |
| struct bus_master_interface *interface = phw->p_interface_buffer; |
| struct hpi_hostbuffer_status *status; |
| if (!phw->instream_host_buffer_size[phm->obj_index]) { |
| hw_message(pao, phm, phr); |
| return; |
| } |
| |
| status = &interface->instream_host_buffer_status[phm->obj_index]; |
| |
| hpi_init_response(phr, phm->object, phm->function, 0); |
| |
| phr->u.d.u.stream_info.state = (u16)status->stream_state; |
| phr->u.d.u.stream_info.samples_transferred = |
| status->samples_processed; |
| phr->u.d.u.stream_info.buffer_size = status->size_in_bytes; |
| phr->u.d.u.stream_info.data_available = |
| instream_get_bytes_available(status); |
| phr->u.d.u.stream_info.auxiliary_data_available = |
| status->auxiliary_data_available; |
| } |
| |
| /*****************************************************************************/ |
| /* LOW-LEVEL */ |
| #define HPI6205_MAX_FILES_TO_LOAD 2 |
| |
| static u16 adapter_boot_load_dsp(struct hpi_adapter_obj *pao, |
| u32 *pos_error_code) |
| { |
| struct hpi_hw_obj *phw = pao->priv; |
| struct dsp_code dsp_code; |
| u16 boot_code_id[HPI6205_MAX_FILES_TO_LOAD]; |
| u32 temp; |
| int dsp = 0, i = 0; |
| u16 err = 0; |
| |
| boot_code_id[0] = HPI_ADAPTER_ASI(0x6205); |
| |
| boot_code_id[1] = pao->pci.pci_dev->subsystem_device; |
| boot_code_id[1] = HPI_ADAPTER_FAMILY_ASI(boot_code_id[1]); |
| |
| /* fix up cases where bootcode id[1] != subsys id */ |
| switch (boot_code_id[1]) { |
| case HPI_ADAPTER_FAMILY_ASI(0x5000): |
| boot_code_id[0] = boot_code_id[1]; |
| boot_code_id[1] = 0; |
| break; |
| case HPI_ADAPTER_FAMILY_ASI(0x5300): |
| case HPI_ADAPTER_FAMILY_ASI(0x5400): |
| case HPI_ADAPTER_FAMILY_ASI(0x6300): |
| boot_code_id[1] = HPI_ADAPTER_FAMILY_ASI(0x6400); |
| break; |
| case HPI_ADAPTER_FAMILY_ASI(0x5500): |
| case HPI_ADAPTER_FAMILY_ASI(0x5600): |
| case HPI_ADAPTER_FAMILY_ASI(0x6500): |
| boot_code_id[1] = HPI_ADAPTER_FAMILY_ASI(0x6600); |
| break; |
| case HPI_ADAPTER_FAMILY_ASI(0x8800): |
| boot_code_id[1] = HPI_ADAPTER_FAMILY_ASI(0x8900); |
| break; |
| default: |
| break; |
| } |
| |
| /* reset DSP by writing a 1 to the WARMRESET bit */ |
| temp = C6205_HDCR_WARMRESET; |
| iowrite32(temp, phw->prHDCR); |
| hpios_delay_micro_seconds(1000); |
| |
| /* check that PCI i/f was configured by EEPROM */ |
| temp = ioread32(phw->prHSR); |
| if ((temp & (C6205_HSR_CFGERR | C6205_HSR_EEREAD)) != |
| C6205_HSR_EEREAD) |
| return HPI6205_ERROR_6205_EEPROM; |
| temp |= 0x04; |
| /* disable PINTA interrupt */ |
| iowrite32(temp, phw->prHSR); |
| |
| /* check control register reports PCI boot mode */ |
| temp = ioread32(phw->prHDCR); |
| if (!(temp & C6205_HDCR_PCIBOOT)) |
| return HPI6205_ERROR_6205_REG; |
| |
| /* try writing a few numbers to the DSP page register */ |
| /* and reading them back. */ |
| temp = 3; |
| iowrite32(temp, phw->prDSPP); |
| if ((temp | C6205_DSPP_MAP1) != ioread32(phw->prDSPP)) |
| return HPI6205_ERROR_6205_DSPPAGE; |
| temp = 2; |
| iowrite32(temp, phw->prDSPP); |
| if ((temp | C6205_DSPP_MAP1) != ioread32(phw->prDSPP)) |
| return HPI6205_ERROR_6205_DSPPAGE; |
| temp = 1; |
| iowrite32(temp, phw->prDSPP); |
| if ((temp | C6205_DSPP_MAP1) != ioread32(phw->prDSPP)) |
| return HPI6205_ERROR_6205_DSPPAGE; |
| /* reset DSP page to the correct number */ |
| temp = 0; |
| iowrite32(temp, phw->prDSPP); |
| if ((temp | C6205_DSPP_MAP1) != ioread32(phw->prDSPP)) |
| return HPI6205_ERROR_6205_DSPPAGE; |
| phw->dsp_page = 0; |
| |
| /* release 6713 from reset before 6205 is bootloaded. |
| This ensures that the EMIF is inactive, |
| and the 6713 HPI gets the correct bootmode etc |
| */ |
| if (boot_code_id[1] != 0) { |
| /* DSP 1 is a C6713 */ |
| /* CLKX0 <- '1' release the C6205 bootmode pulldowns */ |
| boot_loader_write_mem32(pao, 0, (0x018C0024L), 0x00002202); |
| hpios_delay_micro_seconds(100); |
| /* Reset the 6713 #1 - revB */ |
| boot_loader_write_mem32(pao, 0, C6205_BAR0_TIMER1_CTL, 0); |
| |
| /* dummy read every 4 words for 6205 advisory 1.4.4 */ |
| boot_loader_read_mem32(pao, 0, 0); |
| |
| hpios_delay_micro_seconds(100); |
| /* Release C6713 from reset - revB */ |
| boot_loader_write_mem32(pao, 0, C6205_BAR0_TIMER1_CTL, 4); |
| hpios_delay_micro_seconds(100); |
| } |
| |
| for (dsp = 0; dsp < HPI6205_MAX_FILES_TO_LOAD; dsp++) { |
| /* is there a DSP to load? */ |
| if (boot_code_id[dsp] == 0) |
| continue; |
| |
| err = boot_loader_config_emif(pao, dsp); |
| if (err) |
| return err; |
| |
| err = boot_loader_test_internal_memory(pao, dsp); |
| if (err) |
| return err; |
| |
| err = boot_loader_test_external_memory(pao, dsp); |
| if (err) |
| return err; |
| |
| err = boot_loader_test_pld(pao, dsp); |
| if (err) |
| return err; |
| |
| /* write the DSP code down into the DSPs memory */ |
| err = hpi_dsp_code_open(boot_code_id[dsp], pao->pci.pci_dev, |
| &dsp_code, pos_error_code); |
| if (err) |
| return err; |
| |
| while (1) { |
| u32 length; |
| u32 address; |
| u32 type; |
| u32 *pcode; |
| |
| err = hpi_dsp_code_read_word(&dsp_code, &length); |
| if (err) |
| break; |
| if (length == 0xFFFFFFFF) |
| break; /* end of code */ |
| |
| err = hpi_dsp_code_read_word(&dsp_code, &address); |
| if (err) |
| break; |
| err = hpi_dsp_code_read_word(&dsp_code, &type); |
| if (err) |
| break; |
| err = hpi_dsp_code_read_block(length, &dsp_code, |
| &pcode); |
| if (err) |
| break; |
| for (i = 0; i < (int)length; i++) { |
| boot_loader_write_mem32(pao, dsp, address, |
| *pcode); |
| /* dummy read every 4 words */ |
| /* for 6205 advisory 1.4.4 */ |
| if (i % 4 == 0) |
| boot_loader_read_mem32(pao, dsp, |
| address); |
| pcode++; |
| address += 4; |
| } |
| |
| } |
| if (err) { |
| hpi_dsp_code_close(&dsp_code); |
| return err; |
| } |
| |
| /* verify code */ |
| hpi_dsp_code_rewind(&dsp_code); |
| while (1) { |
| u32 length = 0; |
| u32 address = 0; |
| u32 type = 0; |
| u32 *pcode = NULL; |
| u32 data = 0; |
| |
| hpi_dsp_code_read_word(&dsp_code, &length); |
| if (length == 0xFFFFFFFF) |
| break; /* end of code */ |
| |
| hpi_dsp_code_read_word(&dsp_code, &address); |
| hpi_dsp_code_read_word(&dsp_code, &type); |
| hpi_dsp_code_read_block(length, &dsp_code, &pcode); |
| |
| for (i = 0; i < (int)length; i++) { |
| data = boot_loader_read_mem32(pao, dsp, |
| address); |
| if (data != *pcode) { |
| err = 0; |
| break; |
| } |
| pcode++; |
| address += 4; |
| } |
| if (err) |
| break; |
| } |
| hpi_dsp_code_close(&dsp_code); |
| if (err) |
| return err; |
| } |
| |
| /* After bootloading all DSPs, start DSP0 running |
| * The DSP0 code will handle starting and synchronizing with its slaves |
| */ |
| if (phw->p_interface_buffer) { |
| /* we need to tell the card the physical PCI address */ |
| u32 physicalPC_iaddress; |
| struct bus_master_interface *interface = |
| phw->p_interface_buffer; |
| u32 host_mailbox_address_on_dsp; |
| u32 physicalPC_iaddress_verify = 0; |
| int time_out = 10; |
| /* set ack so we know when DSP is ready to go */ |
| /* (dwDspAck will be changed to HIF_RESET) */ |
| interface->dsp_ack = H620_HIF_UNKNOWN; |
| wmb(); /* ensure ack is written before dsp writes back */ |
| |
| err = hpios_locked_mem_get_phys_addr(&phw->h_locked_mem, |
| &physicalPC_iaddress); |
| |
| /* locate the host mailbox on the DSP. */ |
| host_mailbox_address_on_dsp = 0x80000000; |
| while ((physicalPC_iaddress != physicalPC_iaddress_verify) |
| && time_out--) { |
| boot_loader_write_mem32(pao, 0, |
| host_mailbox_address_on_dsp, |
| physicalPC_iaddress); |
| physicalPC_iaddress_verify = |
| boot_loader_read_mem32(pao, 0, |
| host_mailbox_address_on_dsp); |
| } |
| } |
| HPI_DEBUG_LOG(DEBUG, "starting DS_ps running\n"); |
| /* enable interrupts */ |
| temp = ioread32(phw->prHSR); |
| temp &= ~(u32)C6205_HSR_INTAM; |
| iowrite32(temp, phw->prHSR); |
| |
| /* start code running... */ |
| temp = ioread32(phw->prHDCR); |
| temp |= (u32)C6205_HDCR_DSPINT; |
| iowrite32(temp, phw->prHDCR); |
| |
| /* give the DSP 10ms to start up */ |
| hpios_delay_micro_seconds(10000); |
| return err; |
| |
| } |
| |
| /*****************************************************************************/ |
| /* Bootloader utility functions */ |
| |
| static u32 boot_loader_read_mem32(struct hpi_adapter_obj *pao, int dsp_index, |
| u32 address) |
| { |
| struct hpi_hw_obj *phw = pao->priv; |
| u32 data = 0; |
| __iomem u32 *p_data; |
| |
| if (dsp_index == 0) { |
| /* DSP 0 is always C6205 */ |
| if ((address >= 0x01800000) & (address < 0x02000000)) { |
| /* BAR1 register access */ |
| p_data = pao->pci.ap_mem_base[1] + |
| (address & 0x007fffff) / |
| sizeof(*pao->pci.ap_mem_base[1]); |
| /* HPI_DEBUG_LOG(WARNING, |
| "BAR1 access %08x\n", dwAddress); */ |
| } else { |
| u32 dw4M_page = address >> 22L; |
| if (dw4M_page != phw->dsp_page) { |
| phw->dsp_page = dw4M_page; |
| /* *INDENT OFF* */ |
| iowrite32(phw->dsp_page, phw->prDSPP); |
| /* *INDENT-ON* */ |
| } |
| address &= 0x3fffff; /* address within 4M page */ |
| /* BAR0 memory access */ |
| p_data = pao->pci.ap_mem_base[0] + |
| address / sizeof(u32); |
| } |
| data = ioread32(p_data); |
| } else if (dsp_index == 1) { |
| /* DSP 1 is a C6713 */ |
| u32 lsb; |
| boot_loader_write_mem32(pao, 0, HPIAL_ADDR, address); |
| boot_loader_write_mem32(pao, 0, HPIAH_ADDR, address >> 16); |
| lsb = boot_loader_read_mem32(pao, 0, HPIDL_ADDR); |
| data = boot_loader_read_mem32(pao, 0, HPIDH_ADDR); |
| data = (data << 16) | (lsb & 0xFFFF); |
| } |
| return data; |
| } |
| |
| static void boot_loader_write_mem32(struct hpi_adapter_obj *pao, |
| int dsp_index, u32 address, u32 data) |
| { |
| struct hpi_hw_obj *phw = pao->priv; |
| __iomem u32 *p_data; |
| /* u32 dwVerifyData=0; */ |
| |
| if (dsp_index == 0) { |
| /* DSP 0 is always C6205 */ |
| if ((address >= 0x01800000) & (address < 0x02000000)) { |
| /* BAR1 - DSP register access using */ |
| /* Non-prefetchable PCI access */ |
| p_data = pao->pci.ap_mem_base[1] + |
| (address & 0x007fffff) / |
| sizeof(*pao->pci.ap_mem_base[1]); |
| } else { |
| /* BAR0 access - all of DSP memory using */ |
| /* pre-fetchable PCI access */ |
| u32 dw4M_page = address >> 22L; |
| if (dw4M_page != phw->dsp_page) { |
| phw->dsp_page = dw4M_page; |
| /* *INDENT-OFF* */ |
| iowrite32(phw->dsp_page, phw->prDSPP); |
| /* *INDENT-ON* */ |
| } |
| address &= 0x3fffff; /* address within 4M page */ |
| p_data = pao->pci.ap_mem_base[0] + |
| address / sizeof(u32); |
| } |
| iowrite32(data, p_data); |
| } else if (dsp_index == 1) { |
| /* DSP 1 is a C6713 */ |
| boot_loader_write_mem32(pao, 0, HPIAL_ADDR, address); |
| boot_loader_write_mem32(pao, 0, HPIAH_ADDR, address >> 16); |
| |
| /* dummy read every 4 words for 6205 advisory 1.4.4 */ |
| boot_loader_read_mem32(pao, 0, 0); |
| |
| boot_loader_write_mem32(pao, 0, HPIDL_ADDR, data); |
| boot_loader_write_mem32(pao, 0, HPIDH_ADDR, data >> 16); |
| |
| /* dummy read every 4 words for 6205 advisory 1.4.4 */ |
| boot_loader_read_mem32(pao, 0, 0); |
| } |
| } |
| |
| static u16 boot_loader_config_emif(struct hpi_adapter_obj *pao, int dsp_index) |
| { |
| if (dsp_index == 0) { |
| u32 setting; |
| |
| /* DSP 0 is always C6205 */ |
| |
| /* Set the EMIF */ |
| /* memory map of C6205 */ |
| /* 00000000-0000FFFF 16Kx32 internal program */ |
| /* 00400000-00BFFFFF CE0 2Mx32 SDRAM running @ 100MHz */ |
| |
| /* EMIF config */ |
| /*------------ */ |
| /* Global EMIF control */ |
| boot_loader_write_mem32(pao, dsp_index, 0x01800000, 0x3779); |
| #define WS_OFS 28 |
| #define WST_OFS 22 |
| #define WH_OFS 20 |
| #define RS_OFS 16 |
| #define RST_OFS 8 |
| #define MTYPE_OFS 4 |
| #define RH_OFS 0 |
| |
| /* EMIF CE0 setup - 2Mx32 Sync DRAM on ASI5000 cards only */ |
| setting = 0x00000030; |
| boot_loader_write_mem32(pao, dsp_index, 0x01800008, setting); |
| if (setting != boot_loader_read_mem32(pao, dsp_index, |
| 0x01800008)) |
| return HPI6205_ERROR_DSP_EMIF; |
| |
| /* EMIF CE1 setup - 32 bit async. This is 6713 #1 HPI, */ |
| /* which occupies D15..0. 6713 starts at 27MHz, so need */ |
| /* plenty of wait states. See dsn8701.rtf, and 6713 errata. */ |
| /* WST should be 71, but 63 is max possible */ |
| setting = |
| (1L << WS_OFS) | (63L << WST_OFS) | (1L << WH_OFS) | |
| (1L << RS_OFS) | (63L << RST_OFS) | (1L << RH_OFS) | |
| (2L << MTYPE_OFS); |
| boot_loader_write_mem32(pao, dsp_index, 0x01800004, setting); |
| if (setting != boot_loader_read_mem32(pao, dsp_index, |
| 0x01800004)) |
| return HPI6205_ERROR_DSP_EMIF; |
| |
| /* EMIF CE2 setup - 32 bit async. This is 6713 #2 HPI, */ |
| /* which occupies D15..0. 6713 starts at 27MHz, so need */ |
| /* plenty of wait states */ |
| setting = |
| (1L << WS_OFS) | (28L << WST_OFS) | (1L << WH_OFS) | |
| (1L << RS_OFS) | (63L << RST_OFS) | (1L << RH_OFS) | |
| (2L << MTYPE_OFS); |
| boot_loader_write_mem32(pao, dsp_index, 0x01800010, setting); |
| if (setting != boot_loader_read_mem32(pao, dsp_index, |
| 0x01800010)) |
| return HPI6205_ERROR_DSP_EMIF; |
| |
| /* EMIF CE3 setup - 32 bit async. */ |
| /* This is the PLD on the ASI5000 cards only */ |
| setting = |
| (1L << WS_OFS) | (10L << WST_OFS) | (1L << WH_OFS) | |
| (1L << RS_OFS) | (10L << RST_OFS) | (1L << RH_OFS) | |
| (2L << MTYPE_OFS); |
| boot_loader_write_mem32(pao, dsp_index, 0x01800014, setting); |
| if (setting != boot_loader_read_mem32(pao, dsp_index, |
| 0x01800014)) |
| return HPI6205_ERROR_DSP_EMIF; |
| |
| /* set EMIF SDRAM control for 2Mx32 SDRAM (512x32x4 bank) */ |
| /* need to use this else DSP code crashes? */ |
| boot_loader_write_mem32(pao, dsp_index, 0x01800018, |
| 0x07117000); |
| |
| /* EMIF SDRAM Refresh Timing */ |
| /* EMIF SDRAM timing (orig = 0x410, emulator = 0x61a) */ |
| boot_loader_write_mem32(pao, dsp_index, 0x0180001C, |
| 0x00000410); |
| |
| } else if (dsp_index == 1) { |
| /* test access to the C6713s HPI registers */ |
| u32 write_data = 0, read_data = 0, i = 0; |
| |
| /* Set up HPIC for little endian, by setiing HPIC:HWOB=1 */ |
| write_data = 1; |
| boot_loader_write_mem32(pao, 0, HPICL_ADDR, write_data); |
| boot_loader_write_mem32(pao, 0, HPICH_ADDR, write_data); |
| /* C67 HPI is on lower 16bits of 32bit EMIF */ |
| read_data = |
| 0xFFF7 & boot_loader_read_mem32(pao, 0, HPICL_ADDR); |
| if (write_data != read_data) { |
| HPI_DEBUG_LOG(ERROR, "HPICL %x %x\n", write_data, |
| read_data); |
| return HPI6205_ERROR_C6713_HPIC; |
| } |
| /* HPIA - walking ones test */ |
| write_data = 1; |
| for (i = 0; i < 32; i++) { |
| boot_loader_write_mem32(pao, 0, HPIAL_ADDR, |
| write_data); |
| boot_loader_write_mem32(pao, 0, HPIAH_ADDR, |
| (write_data >> 16)); |
| read_data = |
| 0xFFFF & boot_loader_read_mem32(pao, 0, |
| HPIAL_ADDR); |
| read_data = |
| read_data | ((0xFFFF & |
| boot_loader_read_mem32(pao, 0, |
| HPIAH_ADDR)) |
| << 16); |
| if (read_data != write_data) { |
| HPI_DEBUG_LOG(ERROR, "HPIA %x %x\n", |
| write_data, read_data); |
| return HPI6205_ERROR_C6713_HPIA; |
| } |
| write_data = write_data << 1; |
| } |
| |
| /* setup C67x PLL |
| * ** C6713 datasheet says we cannot program PLL from HPI, |
| * and indeed if we try to set the PLL multiply from the HPI, |
| * the PLL does not seem to lock, so we enable the PLL and |
| * use the default multiply of x 7, which for a 27MHz clock |
| * gives a DSP speed of 189MHz |
| */ |
| /* bypass PLL */ |
| boot_loader_write_mem32(pao, dsp_index, 0x01B7C100, 0x0000); |
| hpios_delay_micro_seconds(1000); |
| /* EMIF = 189/3=63MHz */ |
| boot_loader_write_mem32(pao, dsp_index, 0x01B7C120, 0x8002); |
| /* peri = 189/2 */ |
| boot_loader_write_mem32(pao, dsp_index, 0x01B7C11C, 0x8001); |
| /* cpu = 189/1 */ |
| boot_loader_write_mem32(pao, dsp_index, 0x01B7C118, 0x8000); |
| hpios_delay_micro_seconds(1000); |
| /* ** SGT test to take GPO3 high when we start the PLL */ |
| /* and low when the delay is completed */ |
| /* FSX0 <- '1' (GPO3) */ |
| boot_loader_write_mem32(pao, 0, (0x018C0024L), 0x00002A0A); |
| /* PLL not bypassed */ |
| boot_loader_write_mem32(pao, dsp_index, 0x01B7C100, 0x0001); |
| hpios_delay_micro_seconds(1000); |
| /* FSX0 <- '0' (GPO3) */ |
| boot_loader_write_mem32(pao, 0, (0x018C0024L), 0x00002A02); |
| |
| /* 6205 EMIF CE1 resetup - 32 bit async. */ |
| /* Now 6713 #1 is running at 189MHz can reduce waitstates */ |
| boot_loader_write_mem32(pao, 0, 0x01800004, /* CE1 */ |
| (1L << WS_OFS) | (8L << WST_OFS) | (1L << WH_OFS) | |
| (1L << RS_OFS) | (12L << RST_OFS) | (1L << RH_OFS) | |
| (2L << MTYPE_OFS)); |
| |
| hpios_delay_micro_seconds(1000); |
| |
| /* check that we can read one of the PLL registers */ |
| /* PLL should not be bypassed! */ |
| if ((boot_loader_read_mem32(pao, dsp_index, 0x01B7C100) & 0xF) |
| != 0x0001) { |
| return HPI6205_ERROR_C6713_PLL; |
| } |
| /* setup C67x EMIF (note this is the only use of |
| BAR1 via BootLoader_WriteMem32) */ |
| boot_loader_write_mem32(pao, dsp_index, C6713_EMIF_GCTL, |
| 0x000034A8); |
| |
| /* EMIF CE0 setup - 2Mx32 Sync DRAM |
| 31..28 Wr setup |
| 27..22 Wr strobe |
| 21..20 Wr hold |
| 19..16 Rd setup |
| 15..14 - |
| 13..8 Rd strobe |
| 7..4 MTYPE 0011 Sync DRAM 32bits |
| 3 Wr hold MSB |
| 2..0 Rd hold |
| */ |
| boot_loader_write_mem32(pao, dsp_index, C6713_EMIF_CE0, |
| 0x00000030); |
| |
| /* EMIF SDRAM Extension |
| 0x00 |
| 31-21 0000b 0000b 000b |
| 20 WR2RD = 2cycles-1 = 1b |
| |
| 19-18 WR2DEAC = 3cycle-1 = 10b |
| 17 WR2WR = 2cycle-1 = 1b |
| 16-15 R2WDQM = 4cycle-1 = 11b |
| 14-12 RD2WR = 6cycles-1 = 101b |
| |
| 11-10 RD2DEAC = 4cycle-1 = 11b |
| 9 RD2RD = 2cycle-1 = 1b |
| 8-7 THZP = 3cycle-1 = 10b |
| 6-5 TWR = 2cycle-1 = 01b (tWR = 17ns) |
| 4 TRRD = 2cycle = 0b (tRRD = 14ns) |
| 3-1 TRAS = 5cycle-1 = 100b (Tras=42ns) |
| 1 CAS latency = 3cyc = 1b |
| (for Micron 2M32-7 operating at 100MHz) |
| */ |
| boot_loader_write_mem32(pao, dsp_index, C6713_EMIF_SDRAMEXT, |
| 0x001BDF29); |
| |
| /* EMIF SDRAM control - set up for a 2Mx32 SDRAM (512x32x4 bank) |
| 31 - 0b - |
| 30 SDBSZ 1b 4 bank |
| 29..28 SDRSZ 00b 11 row address pins |
| |
| 27..26 SDCSZ 01b 8 column address pins |
| 25 RFEN 1b refersh enabled |
| 24 INIT 1b init SDRAM! |
| |
| 23..20 TRCD 0001b (Trcd/Tcyc)-1 = (20/10)-1 = 1 |
| |
| 19..16 TRP 0001b (Trp/Tcyc)-1 = (20/10)-1 = 1 |
| |
| 15..12 TRC 0110b (Trc/Tcyc)-1 = (70/10)-1 = 6 |
| |
| 11..0 - 0000b 0000b 0000b |
| */ |
| boot_loader_write_mem32(pao, dsp_index, C6713_EMIF_SDRAMCTL, |
| 0x47116000); |
| |
| /* SDRAM refresh timing |
| Need 4,096 refresh cycles every 64ms = 15.625us = 1562cycles of 100MHz = 0x61A |
| */ |
| boot_loader_write_mem32(pao, dsp_index, |
| C6713_EMIF_SDRAMTIMING, 0x00000410); |
| |
| hpios_delay_micro_seconds(1000); |
| } else if (dsp_index == 2) { |
| /* DSP 2 is a C6713 */ |
| } |
| |
| return 0; |
| } |
| |
| static u16 boot_loader_test_memory(struct hpi_adapter_obj *pao, int dsp_index, |
| u32 start_address, u32 length) |
| { |
| u32 i = 0, j = 0; |
| u32 test_addr = 0; |
| u32 test_data = 0, data = 0; |
| |
| length = 1000; |
| |
| /* for 1st word, test each bit in the 32bit word, */ |
| /* dwLength specifies number of 32bit words to test */ |
| /*for(i=0; i<dwLength; i++) */ |
| i = 0; |
| { |
| test_addr = start_address + i * 4; |
| test_data = 0x00000001; |
| for (j = 0; j < 32; j++) { |
| boot_loader_write_mem32(pao, dsp_index, test_addr, |
| test_data); |
| data = boot_loader_read_mem32(pao, dsp_index, |
| test_addr); |
| if (data != test_data) { |
| HPI_DEBUG_LOG(VERBOSE, |
| "Memtest error details " |
| "%08x %08x %08x %i\n", test_addr, |
| test_data, data, dsp_index); |
| return 1; /* error */ |
| } |
| test_data = test_data << 1; |
| } /* for(j) */ |
| } /* for(i) */ |
| |
| /* for the next 100 locations test each location, leaving it as zero */ |
| /* write a zero to the next word in memory before we read */ |
| /* the previous write to make sure every memory location is unique */ |
| for (i = 0; i < 100; i++) { |
| test_addr = start_address + i * 4; |
| test_data = 0xA5A55A5A; |
| boot_loader_write_mem32(pao, dsp_index, test_addr, test_data); |
| boot_loader_write_mem32(pao, dsp_index, test_addr + 4, 0); |
| data = boot_loader_read_mem32(pao, dsp_index, test_addr); |
| if (data != test_data) { |
| HPI_DEBUG_LOG(VERBOSE, |
| "Memtest error details " |
| "%08x %08x %08x %i\n", test_addr, test_data, |
| data, dsp_index); |
| return 1; /* error */ |
| } |
| /* leave location as zero */ |
| boot_loader_write_mem32(pao, dsp_index, test_addr, 0x0); |
| } |
| |
| /* zero out entire memory block */ |
| for (i = 0; i < length; i++) { |
| test_addr = start_address + i * 4; |
| boot_loader_write_mem32(pao, dsp_index, test_addr, 0x0); |
| } |
| return 0; |
| } |
| |
| static u16 boot_loader_test_internal_memory(struct hpi_adapter_obj *pao, |
| int dsp_index) |
| { |
| int err = 0; |
| if (dsp_index == 0) { |
| /* DSP 0 is a C6205 */ |
| /* 64K prog mem */ |
| err = boot_loader_test_memory(pao, dsp_index, 0x00000000, |
| 0x10000); |
| if (!err) |
| /* 64K data mem */ |
| err = boot_loader_test_memory(pao, dsp_index, |
| 0x80000000, 0x10000); |
| } else if (dsp_index == 1) { |
| /* DSP 1 is a C6713 */ |
| /* 192K internal mem */ |
| err = boot_loader_test_memory(pao, dsp_index, 0x00000000, |
| 0x30000); |
| if (!err) |
| /* 64K internal mem / L2 cache */ |
| err = boot_loader_test_memory(pao, dsp_index, |
| 0x00030000, 0x10000); |
| } |
| |
| if (err) |
| return HPI6205_ERROR_DSP_INTMEM; |
| else |
| return 0; |
| } |
| |
| static u16 boot_loader_test_external_memory(struct hpi_adapter_obj *pao, |
| int dsp_index) |
| { |
| u32 dRAM_start_address = 0; |
| u32 dRAM_size = 0; |
| |
| if (dsp_index == 0) { |
| /* only test for SDRAM if an ASI5000 card */ |
| if (pao->pci.pci_dev->subsystem_device == 0x5000) { |
| /* DSP 0 is always C6205 */ |
| dRAM_start_address = 0x00400000; |
| dRAM_size = 0x200000; |
| /*dwDRAMinc=1024; */ |
| } else |
| return 0; |
| } else if (dsp_index == 1) { |
| /* DSP 1 is a C6713 */ |
| dRAM_start_address = 0x80000000; |
| dRAM_size = 0x200000; |
| /*dwDRAMinc=1024; */ |
| } |
| |
| if (boot_loader_test_memory(pao, dsp_index, dRAM_start_address, |
| dRAM_size)) |
| return HPI6205_ERROR_DSP_EXTMEM; |
| return 0; |
| } |
| |
| static u16 boot_loader_test_pld(struct hpi_adapter_obj *pao, int dsp_index) |
| { |
| u32 data = 0; |
| if (dsp_index == 0) { |
| /* only test for DSP0 PLD on ASI5000 card */ |
| if (pao->pci.pci_dev->subsystem_device == 0x5000) { |
| /* PLD is located at CE3=0x03000000 */ |
| data = boot_loader_read_mem32(pao, dsp_index, |
| 0x03000008); |
| if ((data & 0xF) != 0x5) |
| return HPI6205_ERROR_DSP_PLD; |
| data = boot_loader_read_mem32(pao, dsp_index, |
| 0x0300000C); |
| if ((data & 0xF) != 0xA) |
| return HPI6205_ERROR_DSP_PLD; |
| } |
| } else if (dsp_index == 1) { |
| /* DSP 1 is a C6713 */ |
| if (pao->pci.pci_dev->subsystem_device == 0x8700) { |
| /* PLD is located at CE1=0x90000000 */ |
| data = boot_loader_read_mem32(pao, dsp_index, |
| 0x90000010); |
| if ((data & 0xFF) != 0xAA) |
| return HPI6205_ERROR_DSP_PLD; |
| /* 8713 - LED on */ |
| boot_loader_write_mem32(pao, dsp_index, 0x90000000, |
| 0x02); |
| } |
| } |
| return 0; |
| } |
| |
| /** Transfer data to or from DSP |
| nOperation = H620_H620_HIF_SEND_DATA or H620_HIF_GET_DATA |
| */ |
| static short hpi6205_transfer_data(struct hpi_adapter_obj *pao, u8 *p_data, |
| u32 data_size, int operation) |
| { |
| struct hpi_hw_obj *phw = pao->priv; |
| u32 data_transferred = 0; |
| u16 err = 0; |
| u32 temp2; |
| struct bus_master_interface *interface = phw->p_interface_buffer; |
| |
| if (!p_data) |
| return HPI_ERROR_INVALID_DATA_POINTER; |
| |
| data_size &= ~3L; /* round data_size down to nearest 4 bytes */ |
| |
| /* make sure state is IDLE */ |
| if (!wait_dsp_ack(phw, H620_HIF_IDLE, HPI6205_TIMEOUT)) |
| return HPI_ERROR_DSP_HARDWARE; |
| |
| while (data_transferred < data_size) { |
| u32 this_copy = data_size - data_transferred; |
| |
| if (this_copy > HPI6205_SIZEOF_DATA) |
| this_copy = HPI6205_SIZEOF_DATA; |
| |
| if (operation == H620_HIF_SEND_DATA) |
| memcpy((void *)&interface->u.b_data[0], |
| &p_data[data_transferred], this_copy); |
| |
| interface->transfer_size_in_bytes = this_copy; |
| |
| /* DSP must change this back to nOperation */ |
| interface->dsp_ack = H620_HIF_IDLE; |
| send_dsp_command(phw, operation); |
| |
| temp2 = wait_dsp_ack(phw, operation, HPI6205_TIMEOUT); |
| HPI_DEBUG_LOG(DEBUG, "spun %d times for data xfer of %d\n", |
| HPI6205_TIMEOUT - temp2, this_copy); |
| |
| if (!temp2) { |
| /* timed out */ |
| HPI_DEBUG_LOG(ERROR, |
| "Timed out waiting for " "state %d got %d\n", |
| operation, interface->dsp_ack); |
| |
| break; |
| } |
| if (operation == H620_HIF_GET_DATA) |
| memcpy(&p_data[data_transferred], |
| (void *)&interface->u.b_data[0], this_copy); |
| |
| data_transferred += this_copy; |
| } |
| if (interface->dsp_ack != operation) |
| HPI_DEBUG_LOG(DEBUG, "interface->dsp_ack=%d, expected %d\n", |
| interface->dsp_ack, operation); |
| /* err=HPI_ERROR_DSP_HARDWARE; */ |
| |
| send_dsp_command(phw, H620_HIF_IDLE); |
| |
| return err; |
| } |
| |
| /* wait for up to timeout_us microseconds for the DSP |
| to signal state by DMA into dwDspAck |
| */ |
| static int wait_dsp_ack(struct hpi_hw_obj *phw, int state, int timeout_us) |
| { |
| struct bus_master_interface *interface = phw->p_interface_buffer; |
| int t = timeout_us / 4; |
| |
| rmb(); /* ensure interface->dsp_ack is up to date */ |
| while ((interface->dsp_ack != state) && --t) { |
| hpios_delay_micro_seconds(4); |
| rmb(); /* DSP changes dsp_ack by DMA */ |
| } |
| |
| /*HPI_DEBUG_LOG(VERBOSE, "Spun %d for %d\n", timeout_us/4-t, state); */ |
| return t * 4; |
| } |
| |
| /* set the busmaster interface to cmd, then interrupt the DSP */ |
| static void send_dsp_command(struct hpi_hw_obj *phw, int cmd) |
| { |
| struct bus_master_interface *interface = phw->p_interface_buffer; |
| u32 r; |
| |
| interface->host_cmd = cmd; |
| wmb(); /* DSP gets state by DMA, make sure it is written to memory */ |
| /* before we interrupt the DSP */ |
| r = ioread32(phw->prHDCR); |
| r |= (u32)C6205_HDCR_DSPINT; |
| iowrite32(r, phw->prHDCR); |
| r &= ~(u32)C6205_HDCR_DSPINT; |
| iowrite32(r, phw->prHDCR); |
| } |
| |
| static unsigned int message_count; |
| |
| static u16 message_response_sequence(struct hpi_adapter_obj *pao, |
| struct hpi_message *phm, struct hpi_response *phr) |
| { |
| u32 time_out, time_out2; |
| struct hpi_hw_obj *phw = pao->priv; |
| struct bus_master_interface *interface = phw->p_interface_buffer; |
| u16 err = 0; |
| |
| message_count++; |
| if (phm->size > sizeof(interface->u.message_buffer)) { |
| phr->error = HPI_ERROR_MESSAGE_BUFFER_TOO_SMALL; |
| phr->specific_error = sizeof(interface->u.message_buffer); |
| phr->size = sizeof(struct hpi_response_header); |
| HPI_DEBUG_LOG(ERROR, |
| "message len %d too big for buffer %zd \n", phm->size, |
| sizeof(interface->u.message_buffer)); |
| return 0; |
| } |
| |
| /* Assume buffer of type struct bus_master_interface |
| is allocated "noncacheable" */ |
| |
| if (!wait_dsp_ack(phw, H620_HIF_IDLE, HPI6205_TIMEOUT)) { |
| HPI_DEBUG_LOG(DEBUG, "timeout waiting for idle\n"); |
| return HPI6205_ERROR_MSG_RESP_IDLE_TIMEOUT; |
| } |
| |
| memcpy(&interface->u.message_buffer, phm, phm->size); |
| /* signal we want a response */ |
| send_dsp_command(phw, H620_HIF_GET_RESP); |
| |
| time_out2 = wait_dsp_ack(phw, H620_HIF_GET_RESP, HPI6205_TIMEOUT); |
| |
| if (!time_out2) { |
| HPI_DEBUG_LOG(ERROR, |
| "(%u) Timed out waiting for " "GET_RESP state [%x]\n", |
| message_count, interface->dsp_ack); |
| } else { |
| HPI_DEBUG_LOG(VERBOSE, |
| "(%u) transition to GET_RESP after %u\n", |
| message_count, HPI6205_TIMEOUT - time_out2); |
| } |
| /* spin waiting on HIF interrupt flag (end of msg process) */ |
| time_out = HPI6205_TIMEOUT; |
| |
| /* read the result */ |
| if (time_out) { |
| if (interface->u.response_buffer.response.size <= phr->size) |
| memcpy(phr, &interface->u.response_buffer, |
| interface->u.response_buffer.response.size); |
| else { |
| HPI_DEBUG_LOG(ERROR, |
| "response len %d too big for buffer %d\n", |
| interface->u.response_buffer.response.size, |
| phr->size); |
| memcpy(phr, &interface->u.response_buffer, |
| sizeof(struct hpi_response_header)); |
| phr->error = HPI_ERROR_RESPONSE_BUFFER_TOO_SMALL; |
| phr->specific_error = |
| interface->u.response_buffer.response.size; |
| phr->size = sizeof(struct hpi_response_header); |
| } |
| } |
| /* set interface back to idle */ |
| send_dsp_command(phw, H620_HIF_IDLE); |
| |
| if (!time_out || !time_out2) { |
| HPI_DEBUG_LOG(DEBUG, "something timed out!\n"); |
| return HPI6205_ERROR_MSG_RESP_TIMEOUT; |
| } |
| /* special case for adapter close - */ |
| /* wait for the DSP to indicate it is idle */ |
| if (phm->function == HPI_ADAPTER_CLOSE) { |
| if (!wait_dsp_ack(phw, H620_HIF_IDLE, HPI6205_TIMEOUT)) { |
| HPI_DEBUG_LOG(DEBUG, |
| "Timeout waiting for idle " |
| "(on adapter_close)\n"); |
| return HPI6205_ERROR_MSG_RESP_IDLE_TIMEOUT; |
| } |
| } |
| err = hpi_validate_response(phm, phr); |
| return err; |
| } |
| |
| static void hw_message(struct hpi_adapter_obj *pao, struct hpi_message *phm, |
| struct hpi_response *phr) |
| { |
| |
| u16 err = 0; |
| |
| hpios_dsplock_lock(pao); |
| |
| err = message_response_sequence(pao, phm, phr); |
| |
| /* maybe an error response */ |
| if (err) { |
| /* something failed in the HPI/DSP interface */ |
| if (err >= HPI_ERROR_BACKEND_BASE) { |
| phr->error = HPI_ERROR_DSP_COMMUNICATION; |
| phr->specific_error = err; |
| } else { |
| phr->error = err; |
| } |
| |
| pao->dsp_crashed++; |
| |
| /* just the header of the response is valid */ |
| phr->size = sizeof(struct hpi_response_header); |
| goto err; |
| } else |
| pao->dsp_crashed = 0; |
| |
| if (phr->error != 0) /* something failed in the DSP */ |
| goto err; |
| |
| switch (phm->function) { |
| case HPI_OSTREAM_WRITE: |
| case HPI_ISTREAM_ANC_WRITE: |
| err = hpi6205_transfer_data(pao, phm->u.d.u.data.pb_data, |
| phm->u.d.u.data.data_size, H620_HIF_SEND_DATA); |
| break; |
| |
| case HPI_ISTREAM_READ: |
| case HPI_OSTREAM_ANC_READ: |
| err = hpi6205_transfer_data(pao, phm->u.d.u.data.pb_data, |
| phm->u.d.u.data.data_size, H620_HIF_GET_DATA); |
| break; |
| |
| } |
| phr->error = err; |
| |
| err: |
| hpios_dsplock_unlock(pao); |
| |
| return; |
| } |