| /* |
| * Copyright 2001, 2007-2008 MontaVista Software Inc. |
| * Author: MontaVista Software, Inc. <source@mvista.com> |
| * |
| * Copyright (C) 2007 Ralf Baechle (ralf@linux-mips.org) |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License as published by the |
| * Free Software Foundation; either version 2 of the License, or (at your |
| * option) any later version. |
| * |
| * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED |
| * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF |
| * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN |
| * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, |
| * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT |
| * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF |
| * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON |
| * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT |
| * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF |
| * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
| * |
| * You should have received a copy of the GNU General Public License along |
| * with this program; if not, write to the Free Software Foundation, Inc., |
| * 675 Mass Ave, Cambridge, MA 02139, USA. |
| */ |
| |
| #include <linux/bitops.h> |
| #include <linux/init.h> |
| #include <linux/interrupt.h> |
| #include <linux/irq.h> |
| #include <linux/slab.h> |
| #include <linux/sysdev.h> |
| |
| #include <asm/irq_cpu.h> |
| #include <asm/mipsregs.h> |
| #include <asm/mach-au1x00/au1000.h> |
| #ifdef CONFIG_MIPS_PB1000 |
| #include <asm/mach-pb1x00/pb1000.h> |
| #endif |
| |
| static int au1x_ic_settype(struct irq_data *d, unsigned int flow_type); |
| |
| /* NOTE on interrupt priorities: The original writers of this code said: |
| * |
| * Because of the tight timing of SETUP token to reply transactions, |
| * the USB devices-side packet complete interrupt (USB_DEV_REQ_INT) |
| * needs the highest priority. |
| */ |
| |
| /* per-processor fixed function irqs */ |
| struct au1xxx_irqmap { |
| int im_irq; |
| int im_type; |
| int im_request; /* set 1 to get higher priority */ |
| }; |
| |
| struct au1xxx_irqmap au1000_irqmap[] __initdata = { |
| { AU1000_UART0_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, |
| { AU1000_UART1_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, |
| { AU1000_UART2_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, |
| { AU1000_UART3_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, |
| { AU1000_SSI0_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, |
| { AU1000_SSI1_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, |
| { AU1000_DMA_INT_BASE, IRQ_TYPE_LEVEL_HIGH, 0 }, |
| { AU1000_DMA_INT_BASE+1, IRQ_TYPE_LEVEL_HIGH, 0 }, |
| { AU1000_DMA_INT_BASE+2, IRQ_TYPE_LEVEL_HIGH, 0 }, |
| { AU1000_DMA_INT_BASE+3, IRQ_TYPE_LEVEL_HIGH, 0 }, |
| { AU1000_DMA_INT_BASE+4, IRQ_TYPE_LEVEL_HIGH, 0 }, |
| { AU1000_DMA_INT_BASE+5, IRQ_TYPE_LEVEL_HIGH, 0 }, |
| { AU1000_DMA_INT_BASE+6, IRQ_TYPE_LEVEL_HIGH, 0 }, |
| { AU1000_DMA_INT_BASE+7, IRQ_TYPE_LEVEL_HIGH, 0 }, |
| { AU1000_TOY_INT, IRQ_TYPE_EDGE_RISING, 0 }, |
| { AU1000_TOY_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 0 }, |
| { AU1000_TOY_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 0 }, |
| { AU1000_TOY_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 0 }, |
| { AU1000_RTC_INT, IRQ_TYPE_EDGE_RISING, 0 }, |
| { AU1000_RTC_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 0 }, |
| { AU1000_RTC_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 0 }, |
| { AU1000_RTC_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 1 }, |
| { AU1000_IRDA_TX_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, |
| { AU1000_IRDA_RX_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, |
| { AU1000_USB_DEV_REQ_INT, IRQ_TYPE_LEVEL_HIGH, 1 }, |
| { AU1000_USB_DEV_SUS_INT, IRQ_TYPE_EDGE_RISING, 0 }, |
| { AU1000_USB_HOST_INT, IRQ_TYPE_LEVEL_LOW, 0 }, |
| { AU1000_ACSYNC_INT, IRQ_TYPE_EDGE_RISING, 0 }, |
| { AU1000_MAC0_DMA_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, |
| { AU1000_MAC1_DMA_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, |
| { AU1000_AC97C_INT, IRQ_TYPE_EDGE_RISING, 0 }, |
| { -1, }, |
| }; |
| |
| struct au1xxx_irqmap au1500_irqmap[] __initdata = { |
| { AU1500_UART0_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, |
| { AU1500_PCI_INTA, IRQ_TYPE_LEVEL_LOW, 0 }, |
| { AU1500_PCI_INTB, IRQ_TYPE_LEVEL_LOW, 0 }, |
| { AU1500_UART3_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, |
| { AU1500_PCI_INTC, IRQ_TYPE_LEVEL_LOW, 0 }, |
| { AU1500_PCI_INTD, IRQ_TYPE_LEVEL_LOW, 0 }, |
| { AU1500_DMA_INT_BASE, IRQ_TYPE_LEVEL_HIGH, 0 }, |
| { AU1500_DMA_INT_BASE+1, IRQ_TYPE_LEVEL_HIGH, 0 }, |
| { AU1500_DMA_INT_BASE+2, IRQ_TYPE_LEVEL_HIGH, 0 }, |
| { AU1500_DMA_INT_BASE+3, IRQ_TYPE_LEVEL_HIGH, 0 }, |
| { AU1500_DMA_INT_BASE+4, IRQ_TYPE_LEVEL_HIGH, 0 }, |
| { AU1500_DMA_INT_BASE+5, IRQ_TYPE_LEVEL_HIGH, 0 }, |
| { AU1500_DMA_INT_BASE+6, IRQ_TYPE_LEVEL_HIGH, 0 }, |
| { AU1500_DMA_INT_BASE+7, IRQ_TYPE_LEVEL_HIGH, 0 }, |
| { AU1500_TOY_INT, IRQ_TYPE_EDGE_RISING, 0 }, |
| { AU1500_TOY_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 0 }, |
| { AU1500_TOY_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 0 }, |
| { AU1500_TOY_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 0 }, |
| { AU1500_RTC_INT, IRQ_TYPE_EDGE_RISING, 0 }, |
| { AU1500_RTC_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 0 }, |
| { AU1500_RTC_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 0 }, |
| { AU1500_RTC_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 1 }, |
| { AU1500_USB_DEV_REQ_INT, IRQ_TYPE_LEVEL_HIGH, 1 }, |
| { AU1500_USB_DEV_SUS_INT, IRQ_TYPE_EDGE_RISING, 0 }, |
| { AU1500_USB_HOST_INT, IRQ_TYPE_LEVEL_LOW, 0 }, |
| { AU1500_ACSYNC_INT, IRQ_TYPE_EDGE_RISING, 0 }, |
| { AU1500_MAC0_DMA_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, |
| { AU1500_MAC1_DMA_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, |
| { AU1500_AC97C_INT, IRQ_TYPE_EDGE_RISING, 0 }, |
| { -1, }, |
| }; |
| |
| struct au1xxx_irqmap au1100_irqmap[] __initdata = { |
| { AU1100_UART0_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, |
| { AU1100_UART1_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, |
| { AU1100_SD_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, |
| { AU1100_UART3_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, |
| { AU1100_SSI0_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, |
| { AU1100_SSI1_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, |
| { AU1100_DMA_INT_BASE, IRQ_TYPE_LEVEL_HIGH, 0 }, |
| { AU1100_DMA_INT_BASE+1, IRQ_TYPE_LEVEL_HIGH, 0 }, |
| { AU1100_DMA_INT_BASE+2, IRQ_TYPE_LEVEL_HIGH, 0 }, |
| { AU1100_DMA_INT_BASE+3, IRQ_TYPE_LEVEL_HIGH, 0 }, |
| { AU1100_DMA_INT_BASE+4, IRQ_TYPE_LEVEL_HIGH, 0 }, |
| { AU1100_DMA_INT_BASE+5, IRQ_TYPE_LEVEL_HIGH, 0 }, |
| { AU1100_DMA_INT_BASE+6, IRQ_TYPE_LEVEL_HIGH, 0 }, |
| { AU1100_DMA_INT_BASE+7, IRQ_TYPE_LEVEL_HIGH, 0 }, |
| { AU1100_TOY_INT, IRQ_TYPE_EDGE_RISING, 0 }, |
| { AU1100_TOY_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 0 }, |
| { AU1100_TOY_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 0 }, |
| { AU1100_TOY_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 0 }, |
| { AU1100_RTC_INT, IRQ_TYPE_EDGE_RISING, 0 }, |
| { AU1100_RTC_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 0 }, |
| { AU1100_RTC_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 0 }, |
| { AU1100_RTC_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 1 }, |
| { AU1100_IRDA_TX_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, |
| { AU1100_IRDA_RX_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, |
| { AU1100_USB_DEV_REQ_INT, IRQ_TYPE_LEVEL_HIGH, 1 }, |
| { AU1100_USB_DEV_SUS_INT, IRQ_TYPE_EDGE_RISING, 0 }, |
| { AU1100_USB_HOST_INT, IRQ_TYPE_LEVEL_LOW, 0 }, |
| { AU1100_ACSYNC_INT, IRQ_TYPE_EDGE_RISING, 0 }, |
| { AU1100_MAC0_DMA_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, |
| { AU1100_LCD_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, |
| { AU1100_AC97C_INT, IRQ_TYPE_EDGE_RISING, 0 }, |
| { -1, }, |
| }; |
| |
| struct au1xxx_irqmap au1550_irqmap[] __initdata = { |
| { AU1550_UART0_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, |
| { AU1550_PCI_INTA, IRQ_TYPE_LEVEL_LOW, 0 }, |
| { AU1550_PCI_INTB, IRQ_TYPE_LEVEL_LOW, 0 }, |
| { AU1550_DDMA_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, |
| { AU1550_CRYPTO_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, |
| { AU1550_PCI_INTC, IRQ_TYPE_LEVEL_LOW, 0 }, |
| { AU1550_PCI_INTD, IRQ_TYPE_LEVEL_LOW, 0 }, |
| { AU1550_PCI_RST_INT, IRQ_TYPE_LEVEL_LOW, 0 }, |
| { AU1550_UART1_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, |
| { AU1550_UART3_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, |
| { AU1550_PSC0_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, |
| { AU1550_PSC1_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, |
| { AU1550_PSC2_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, |
| { AU1550_PSC3_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, |
| { AU1550_TOY_INT, IRQ_TYPE_EDGE_RISING, 0 }, |
| { AU1550_TOY_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 0 }, |
| { AU1550_TOY_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 0 }, |
| { AU1550_TOY_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 0 }, |
| { AU1550_RTC_INT, IRQ_TYPE_EDGE_RISING, 0 }, |
| { AU1550_RTC_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 0 }, |
| { AU1550_RTC_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 0 }, |
| { AU1550_RTC_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 1 }, |
| { AU1550_NAND_INT, IRQ_TYPE_EDGE_RISING, 0 }, |
| { AU1550_USB_DEV_REQ_INT, IRQ_TYPE_LEVEL_HIGH, 1 }, |
| { AU1550_USB_DEV_SUS_INT, IRQ_TYPE_EDGE_RISING, 0 }, |
| { AU1550_USB_HOST_INT, IRQ_TYPE_LEVEL_LOW, 0 }, |
| { AU1550_MAC0_DMA_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, |
| { AU1550_MAC1_DMA_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, |
| { -1, }, |
| }; |
| |
| struct au1xxx_irqmap au1200_irqmap[] __initdata = { |
| { AU1200_UART0_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, |
| { AU1200_SWT_INT, IRQ_TYPE_EDGE_RISING, 0 }, |
| { AU1200_SD_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, |
| { AU1200_DDMA_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, |
| { AU1200_MAE_BE_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, |
| { AU1200_UART1_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, |
| { AU1200_MAE_FE_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, |
| { AU1200_PSC0_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, |
| { AU1200_PSC1_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, |
| { AU1200_AES_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, |
| { AU1200_CAMERA_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, |
| { AU1200_TOY_INT, IRQ_TYPE_EDGE_RISING, 0 }, |
| { AU1200_TOY_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 0 }, |
| { AU1200_TOY_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 0 }, |
| { AU1200_TOY_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 0 }, |
| { AU1200_RTC_INT, IRQ_TYPE_EDGE_RISING, 0 }, |
| { AU1200_RTC_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 0 }, |
| { AU1200_RTC_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 0 }, |
| { AU1200_RTC_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 1 }, |
| { AU1200_NAND_INT, IRQ_TYPE_EDGE_RISING, 0 }, |
| { AU1200_USB_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, |
| { AU1200_LCD_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, |
| { AU1200_MAE_BOTH_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, |
| { -1, }, |
| }; |
| |
| |
| static void au1x_ic0_unmask(struct irq_data *d) |
| { |
| unsigned int bit = d->irq - AU1000_INTC0_INT_BASE; |
| au_writel(1 << bit, IC0_MASKSET); |
| au_writel(1 << bit, IC0_WAKESET); |
| au_sync(); |
| } |
| |
| static void au1x_ic1_unmask(struct irq_data *d) |
| { |
| unsigned int bit = d->irq - AU1000_INTC1_INT_BASE; |
| au_writel(1 << bit, IC1_MASKSET); |
| au_writel(1 << bit, IC1_WAKESET); |
| |
| /* very hacky. does the pb1000 cpld auto-disable this int? |
| * nowhere in the current kernel sources is it disabled. --mlau |
| */ |
| #if defined(CONFIG_MIPS_PB1000) |
| if (d->irq == AU1000_GPIO15_INT) |
| au_writel(0x4000, PB1000_MDR); /* enable int */ |
| #endif |
| au_sync(); |
| } |
| |
| static void au1x_ic0_mask(struct irq_data *d) |
| { |
| unsigned int bit = d->irq - AU1000_INTC0_INT_BASE; |
| au_writel(1 << bit, IC0_MASKCLR); |
| au_writel(1 << bit, IC0_WAKECLR); |
| au_sync(); |
| } |
| |
| static void au1x_ic1_mask(struct irq_data *d) |
| { |
| unsigned int bit = d->irq - AU1000_INTC1_INT_BASE; |
| au_writel(1 << bit, IC1_MASKCLR); |
| au_writel(1 << bit, IC1_WAKECLR); |
| au_sync(); |
| } |
| |
| static void au1x_ic0_ack(struct irq_data *d) |
| { |
| unsigned int bit = d->irq - AU1000_INTC0_INT_BASE; |
| |
| /* |
| * This may assume that we don't get interrupts from |
| * both edges at once, or if we do, that we don't care. |
| */ |
| au_writel(1 << bit, IC0_FALLINGCLR); |
| au_writel(1 << bit, IC0_RISINGCLR); |
| au_sync(); |
| } |
| |
| static void au1x_ic1_ack(struct irq_data *d) |
| { |
| unsigned int bit = d->irq - AU1000_INTC1_INT_BASE; |
| |
| /* |
| * This may assume that we don't get interrupts from |
| * both edges at once, or if we do, that we don't care. |
| */ |
| au_writel(1 << bit, IC1_FALLINGCLR); |
| au_writel(1 << bit, IC1_RISINGCLR); |
| au_sync(); |
| } |
| |
| static void au1x_ic0_maskack(struct irq_data *d) |
| { |
| unsigned int bit = d->irq - AU1000_INTC0_INT_BASE; |
| |
| au_writel(1 << bit, IC0_WAKECLR); |
| au_writel(1 << bit, IC0_MASKCLR); |
| au_writel(1 << bit, IC0_RISINGCLR); |
| au_writel(1 << bit, IC0_FALLINGCLR); |
| au_sync(); |
| } |
| |
| static void au1x_ic1_maskack(struct irq_data *d) |
| { |
| unsigned int bit = d->irq - AU1000_INTC1_INT_BASE; |
| |
| au_writel(1 << bit, IC1_WAKECLR); |
| au_writel(1 << bit, IC1_MASKCLR); |
| au_writel(1 << bit, IC1_RISINGCLR); |
| au_writel(1 << bit, IC1_FALLINGCLR); |
| au_sync(); |
| } |
| |
| static int au1x_ic1_setwake(struct irq_data *d, unsigned int on) |
| { |
| int bit = d->irq - AU1000_INTC1_INT_BASE; |
| unsigned long wakemsk, flags; |
| |
| /* only GPIO 0-7 can act as wakeup source. Fortunately these |
| * are wired up identically on all supported variants. |
| */ |
| if ((bit < 0) || (bit > 7)) |
| return -EINVAL; |
| |
| local_irq_save(flags); |
| wakemsk = au_readl(SYS_WAKEMSK); |
| if (on) |
| wakemsk |= 1 << bit; |
| else |
| wakemsk &= ~(1 << bit); |
| au_writel(wakemsk, SYS_WAKEMSK); |
| au_sync(); |
| local_irq_restore(flags); |
| |
| return 0; |
| } |
| |
| /* |
| * irq_chips for both ICs; this way the mask handlers can be |
| * as short as possible. |
| */ |
| static struct irq_chip au1x_ic0_chip = { |
| .name = "Alchemy-IC0", |
| .irq_ack = au1x_ic0_ack, |
| .irq_mask = au1x_ic0_mask, |
| .irq_mask_ack = au1x_ic0_maskack, |
| .irq_unmask = au1x_ic0_unmask, |
| .irq_set_type = au1x_ic_settype, |
| }; |
| |
| static struct irq_chip au1x_ic1_chip = { |
| .name = "Alchemy-IC1", |
| .irq_ack = au1x_ic1_ack, |
| .irq_mask = au1x_ic1_mask, |
| .irq_mask_ack = au1x_ic1_maskack, |
| .irq_unmask = au1x_ic1_unmask, |
| .irq_set_type = au1x_ic_settype, |
| .irq_set_wake = au1x_ic1_setwake, |
| }; |
| |
| static int au1x_ic_settype(struct irq_data *d, unsigned int flow_type) |
| { |
| struct irq_chip *chip; |
| unsigned long icr[6]; |
| unsigned int bit, ic, irq = d->irq; |
| irq_flow_handler_t handler = NULL; |
| unsigned char *name = NULL; |
| int ret; |
| |
| if (irq >= AU1000_INTC1_INT_BASE) { |
| bit = irq - AU1000_INTC1_INT_BASE; |
| chip = &au1x_ic1_chip; |
| ic = 1; |
| } else { |
| bit = irq - AU1000_INTC0_INT_BASE; |
| chip = &au1x_ic0_chip; |
| ic = 0; |
| } |
| |
| if (bit > 31) |
| return -EINVAL; |
| |
| icr[0] = ic ? IC1_CFG0SET : IC0_CFG0SET; |
| icr[1] = ic ? IC1_CFG1SET : IC0_CFG1SET; |
| icr[2] = ic ? IC1_CFG2SET : IC0_CFG2SET; |
| icr[3] = ic ? IC1_CFG0CLR : IC0_CFG0CLR; |
| icr[4] = ic ? IC1_CFG1CLR : IC0_CFG1CLR; |
| icr[5] = ic ? IC1_CFG2CLR : IC0_CFG2CLR; |
| |
| ret = 0; |
| |
| switch (flow_type) { /* cfgregs 2:1:0 */ |
| case IRQ_TYPE_EDGE_RISING: /* 0:0:1 */ |
| au_writel(1 << bit, icr[5]); |
| au_writel(1 << bit, icr[4]); |
| au_writel(1 << bit, icr[0]); |
| handler = handle_edge_irq; |
| name = "riseedge"; |
| break; |
| case IRQ_TYPE_EDGE_FALLING: /* 0:1:0 */ |
| au_writel(1 << bit, icr[5]); |
| au_writel(1 << bit, icr[1]); |
| au_writel(1 << bit, icr[3]); |
| handler = handle_edge_irq; |
| name = "falledge"; |
| break; |
| case IRQ_TYPE_EDGE_BOTH: /* 0:1:1 */ |
| au_writel(1 << bit, icr[5]); |
| au_writel(1 << bit, icr[1]); |
| au_writel(1 << bit, icr[0]); |
| handler = handle_edge_irq; |
| name = "bothedge"; |
| break; |
| case IRQ_TYPE_LEVEL_HIGH: /* 1:0:1 */ |
| au_writel(1 << bit, icr[2]); |
| au_writel(1 << bit, icr[4]); |
| au_writel(1 << bit, icr[0]); |
| handler = handle_level_irq; |
| name = "hilevel"; |
| break; |
| case IRQ_TYPE_LEVEL_LOW: /* 1:1:0 */ |
| au_writel(1 << bit, icr[2]); |
| au_writel(1 << bit, icr[1]); |
| au_writel(1 << bit, icr[3]); |
| handler = handle_level_irq; |
| name = "lowlevel"; |
| break; |
| case IRQ_TYPE_NONE: /* 0:0:0 */ |
| au_writel(1 << bit, icr[5]); |
| au_writel(1 << bit, icr[4]); |
| au_writel(1 << bit, icr[3]); |
| break; |
| default: |
| ret = -EINVAL; |
| } |
| __irq_set_chip_handler_name_locked(d->irq, chip, handler, name); |
| |
| au_sync(); |
| |
| return ret; |
| } |
| |
| asmlinkage void plat_irq_dispatch(void) |
| { |
| unsigned int pending = read_c0_status() & read_c0_cause(); |
| unsigned long s, off; |
| |
| if (pending & CAUSEF_IP7) { |
| off = MIPS_CPU_IRQ_BASE + 7; |
| goto handle; |
| } else if (pending & CAUSEF_IP2) { |
| s = IC0_REQ0INT; |
| off = AU1000_INTC0_INT_BASE; |
| } else if (pending & CAUSEF_IP3) { |
| s = IC0_REQ1INT; |
| off = AU1000_INTC0_INT_BASE; |
| } else if (pending & CAUSEF_IP4) { |
| s = IC1_REQ0INT; |
| off = AU1000_INTC1_INT_BASE; |
| } else if (pending & CAUSEF_IP5) { |
| s = IC1_REQ1INT; |
| off = AU1000_INTC1_INT_BASE; |
| } else |
| goto spurious; |
| |
| s = au_readl(s); |
| if (unlikely(!s)) { |
| spurious: |
| spurious_interrupt(); |
| return; |
| } |
| off += __ffs(s); |
| handle: |
| do_IRQ(off); |
| } |
| |
| static void __init au1000_init_irq(struct au1xxx_irqmap *map) |
| { |
| unsigned int bit, irq_nr; |
| int i; |
| |
| /* |
| * Initialize interrupt controllers to a safe state. |
| */ |
| au_writel(0xffffffff, IC0_CFG0CLR); |
| au_writel(0xffffffff, IC0_CFG1CLR); |
| au_writel(0xffffffff, IC0_CFG2CLR); |
| au_writel(0xffffffff, IC0_MASKCLR); |
| au_writel(0xffffffff, IC0_ASSIGNCLR); |
| au_writel(0xffffffff, IC0_WAKECLR); |
| au_writel(0xffffffff, IC0_SRCSET); |
| au_writel(0xffffffff, IC0_FALLINGCLR); |
| au_writel(0xffffffff, IC0_RISINGCLR); |
| au_writel(0x00000000, IC0_TESTBIT); |
| |
| au_writel(0xffffffff, IC1_CFG0CLR); |
| au_writel(0xffffffff, IC1_CFG1CLR); |
| au_writel(0xffffffff, IC1_CFG2CLR); |
| au_writel(0xffffffff, IC1_MASKCLR); |
| au_writel(0xffffffff, IC1_ASSIGNCLR); |
| au_writel(0xffffffff, IC1_WAKECLR); |
| au_writel(0xffffffff, IC1_SRCSET); |
| au_writel(0xffffffff, IC1_FALLINGCLR); |
| au_writel(0xffffffff, IC1_RISINGCLR); |
| au_writel(0x00000000, IC1_TESTBIT); |
| |
| mips_cpu_irq_init(); |
| |
| /* register all 64 possible IC0+IC1 irq sources as type "none". |
| * Use set_irq_type() to set edge/level behaviour at runtime. |
| */ |
| for (i = AU1000_INTC0_INT_BASE; |
| (i < AU1000_INTC0_INT_BASE + 32); i++) |
| au1x_ic_settype(irq_get_irq_data(i), IRQ_TYPE_NONE); |
| |
| for (i = AU1000_INTC1_INT_BASE; |
| (i < AU1000_INTC1_INT_BASE + 32); i++) |
| au1x_ic_settype(irq_get_irq_data(i), IRQ_TYPE_NONE); |
| |
| /* |
| * Initialize IC0, which is fixed per processor. |
| */ |
| while (map->im_irq != -1) { |
| irq_nr = map->im_irq; |
| |
| if (irq_nr >= AU1000_INTC1_INT_BASE) { |
| bit = irq_nr - AU1000_INTC1_INT_BASE; |
| if (map->im_request) |
| au_writel(1 << bit, IC1_ASSIGNSET); |
| } else { |
| bit = irq_nr - AU1000_INTC0_INT_BASE; |
| if (map->im_request) |
| au_writel(1 << bit, IC0_ASSIGNSET); |
| } |
| |
| au1x_ic_settype(irq_get_irq_data(irq_nr), map->im_type); |
| ++map; |
| } |
| |
| set_c0_status(IE_IRQ0 | IE_IRQ1 | IE_IRQ2 | IE_IRQ3); |
| } |
| |
| void __init arch_init_irq(void) |
| { |
| switch (alchemy_get_cputype()) { |
| case ALCHEMY_CPU_AU1000: |
| au1000_init_irq(au1000_irqmap); |
| break; |
| case ALCHEMY_CPU_AU1500: |
| au1000_init_irq(au1500_irqmap); |
| break; |
| case ALCHEMY_CPU_AU1100: |
| au1000_init_irq(au1100_irqmap); |
| break; |
| case ALCHEMY_CPU_AU1550: |
| au1000_init_irq(au1550_irqmap); |
| break; |
| case ALCHEMY_CPU_AU1200: |
| au1000_init_irq(au1200_irqmap); |
| break; |
| } |
| } |
| |
| struct alchemy_ic_sysdev { |
| struct sys_device sysdev; |
| void __iomem *base; |
| unsigned long pmdata[7]; |
| }; |
| |
| static int alchemy_ic_suspend(struct sys_device *dev, pm_message_t state) |
| { |
| struct alchemy_ic_sysdev *icdev = |
| container_of(dev, struct alchemy_ic_sysdev, sysdev); |
| |
| icdev->pmdata[0] = __raw_readl(icdev->base + IC_CFG0RD); |
| icdev->pmdata[1] = __raw_readl(icdev->base + IC_CFG1RD); |
| icdev->pmdata[2] = __raw_readl(icdev->base + IC_CFG2RD); |
| icdev->pmdata[3] = __raw_readl(icdev->base + IC_SRCRD); |
| icdev->pmdata[4] = __raw_readl(icdev->base + IC_ASSIGNRD); |
| icdev->pmdata[5] = __raw_readl(icdev->base + IC_WAKERD); |
| icdev->pmdata[6] = __raw_readl(icdev->base + IC_MASKRD); |
| |
| return 0; |
| } |
| |
| static int alchemy_ic_resume(struct sys_device *dev) |
| { |
| struct alchemy_ic_sysdev *icdev = |
| container_of(dev, struct alchemy_ic_sysdev, sysdev); |
| |
| __raw_writel(0xffffffff, icdev->base + IC_MASKCLR); |
| __raw_writel(0xffffffff, icdev->base + IC_CFG0CLR); |
| __raw_writel(0xffffffff, icdev->base + IC_CFG1CLR); |
| __raw_writel(0xffffffff, icdev->base + IC_CFG2CLR); |
| __raw_writel(0xffffffff, icdev->base + IC_SRCCLR); |
| __raw_writel(0xffffffff, icdev->base + IC_ASSIGNCLR); |
| __raw_writel(0xffffffff, icdev->base + IC_WAKECLR); |
| __raw_writel(0xffffffff, icdev->base + IC_RISINGCLR); |
| __raw_writel(0xffffffff, icdev->base + IC_FALLINGCLR); |
| __raw_writel(0x00000000, icdev->base + IC_TESTBIT); |
| wmb(); |
| __raw_writel(icdev->pmdata[0], icdev->base + IC_CFG0SET); |
| __raw_writel(icdev->pmdata[1], icdev->base + IC_CFG1SET); |
| __raw_writel(icdev->pmdata[2], icdev->base + IC_CFG2SET); |
| __raw_writel(icdev->pmdata[3], icdev->base + IC_SRCSET); |
| __raw_writel(icdev->pmdata[4], icdev->base + IC_ASSIGNSET); |
| __raw_writel(icdev->pmdata[5], icdev->base + IC_WAKESET); |
| wmb(); |
| |
| __raw_writel(icdev->pmdata[6], icdev->base + IC_MASKSET); |
| wmb(); |
| |
| return 0; |
| } |
| |
| static struct sysdev_class alchemy_ic_sysdev_class = { |
| .name = "ic", |
| .suspend = alchemy_ic_suspend, |
| .resume = alchemy_ic_resume, |
| }; |
| |
| static int __init alchemy_ic_sysdev_init(void) |
| { |
| struct alchemy_ic_sysdev *icdev; |
| unsigned long icbase[2] = { IC0_PHYS_ADDR, IC1_PHYS_ADDR }; |
| int err, i; |
| |
| err = sysdev_class_register(&alchemy_ic_sysdev_class); |
| if (err) |
| return err; |
| |
| for (i = 0; i < 2; i++) { |
| icdev = kzalloc(sizeof(struct alchemy_ic_sysdev), GFP_KERNEL); |
| if (!icdev) |
| return -ENOMEM; |
| |
| icdev->base = ioremap(icbase[i], 0x1000); |
| |
| icdev->sysdev.id = i; |
| icdev->sysdev.cls = &alchemy_ic_sysdev_class; |
| err = sysdev_register(&icdev->sysdev); |
| if (err) { |
| kfree(icdev); |
| return err; |
| } |
| } |
| |
| return 0; |
| } |
| device_initcall(alchemy_ic_sysdev_init); |