| /* |
| * Stuff used by all variants of the driver |
| * |
| * Copyright (c) 2001 by Stefan Eilers, |
| * Hansjoerg Lipp <hjlipp@web.de>, |
| * Tilman Schmidt <tilman@imap.cc>. |
| * |
| * ===================================================================== |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License as |
| * published by the Free Software Foundation; either version 2 of |
| * the License, or (at your option) any later version. |
| * ===================================================================== |
| */ |
| |
| #include "gigaset.h" |
| |
| /* ========================================================== */ |
| /* bit masks for pending commands */ |
| #define PC_DIAL 0x001 |
| #define PC_HUP 0x002 |
| #define PC_INIT 0x004 |
| #define PC_DLE0 0x008 |
| #define PC_DLE1 0x010 |
| #define PC_SHUTDOWN 0x020 |
| #define PC_ACCEPT 0x040 |
| #define PC_CID 0x080 |
| #define PC_NOCID 0x100 |
| #define PC_CIDMODE 0x200 |
| #define PC_UMMODE 0x400 |
| |
| /* types of modem responses */ |
| #define RT_NOTHING 0 |
| #define RT_ZSAU 1 |
| #define RT_RING 2 |
| #define RT_NUMBER 3 |
| #define RT_STRING 4 |
| #define RT_HEX 5 |
| #define RT_ZCAU 6 |
| |
| /* Possible ASCII responses */ |
| #define RSP_OK 0 |
| //#define RSP_BUSY 1 |
| //#define RSP_CONNECT 2 |
| #define RSP_ZGCI 3 |
| #define RSP_RING 4 |
| #define RSP_ZAOC 5 |
| #define RSP_ZCSTR 6 |
| #define RSP_ZCFGT 7 |
| #define RSP_ZCFG 8 |
| #define RSP_ZCCR 9 |
| #define RSP_EMPTY 10 |
| #define RSP_ZLOG 11 |
| #define RSP_ZCAU 12 |
| #define RSP_ZMWI 13 |
| #define RSP_ZABINFO 14 |
| #define RSP_ZSMLSTCHG 15 |
| #define RSP_VAR 100 |
| #define RSP_ZSAU (RSP_VAR + VAR_ZSAU) |
| #define RSP_ZDLE (RSP_VAR + VAR_ZDLE) |
| #define RSP_ZVLS (RSP_VAR + VAR_ZVLS) |
| #define RSP_ZCTP (RSP_VAR + VAR_ZCTP) |
| #define RSP_STR (RSP_VAR + VAR_NUM) |
| #define RSP_NMBR (RSP_STR + STR_NMBR) |
| #define RSP_ZCPN (RSP_STR + STR_ZCPN) |
| #define RSP_ZCON (RSP_STR + STR_ZCON) |
| #define RSP_ZBC (RSP_STR + STR_ZBC) |
| #define RSP_ZHLC (RSP_STR + STR_ZHLC) |
| #define RSP_ERROR -1 /* ERROR */ |
| #define RSP_WRONG_CID -2 /* unknown cid in cmd */ |
| //#define RSP_EMPTY -3 |
| #define RSP_UNKNOWN -4 /* unknown response */ |
| #define RSP_FAIL -5 /* internal error */ |
| #define RSP_INVAL -6 /* invalid response */ |
| |
| #define RSP_NONE -19 |
| #define RSP_STRING -20 |
| #define RSP_NULL -21 |
| //#define RSP_RETRYFAIL -22 |
| //#define RSP_RETRY -23 |
| //#define RSP_SKIP -24 |
| #define RSP_INIT -27 |
| #define RSP_ANY -26 |
| #define RSP_LAST -28 |
| #define RSP_NODEV -9 |
| |
| /* actions for process_response */ |
| #define ACT_NOTHING 0 |
| #define ACT_SETDLE1 1 |
| #define ACT_SETDLE0 2 |
| #define ACT_FAILINIT 3 |
| #define ACT_HUPMODEM 4 |
| #define ACT_CONFIGMODE 5 |
| #define ACT_INIT 6 |
| #define ACT_DLE0 7 |
| #define ACT_DLE1 8 |
| #define ACT_FAILDLE0 9 |
| #define ACT_FAILDLE1 10 |
| #define ACT_RING 11 |
| #define ACT_CID 12 |
| #define ACT_FAILCID 13 |
| #define ACT_SDOWN 14 |
| #define ACT_FAILSDOWN 15 |
| #define ACT_DEBUG 16 |
| #define ACT_WARN 17 |
| #define ACT_DIALING 18 |
| #define ACT_ABORTDIAL 19 |
| #define ACT_DISCONNECT 20 |
| #define ACT_CONNECT 21 |
| #define ACT_REMOTEREJECT 22 |
| #define ACT_CONNTIMEOUT 23 |
| #define ACT_REMOTEHUP 24 |
| #define ACT_ABORTHUP 25 |
| #define ACT_ICALL 26 |
| #define ACT_ACCEPTED 27 |
| #define ACT_ABORTACCEPT 28 |
| #define ACT_TIMEOUT 29 |
| #define ACT_GETSTRING 30 |
| #define ACT_SETVER 31 |
| #define ACT_FAILVER 32 |
| #define ACT_GOTVER 33 |
| #define ACT_TEST 34 |
| #define ACT_ERROR 35 |
| #define ACT_ABORTCID 36 |
| #define ACT_ZCAU 37 |
| #define ACT_NOTIFY_BC_DOWN 38 |
| #define ACT_NOTIFY_BC_UP 39 |
| #define ACT_DIAL 40 |
| #define ACT_ACCEPT 41 |
| #define ACT_PROTO_L2 42 |
| #define ACT_HUP 43 |
| #define ACT_IF_LOCK 44 |
| #define ACT_START 45 |
| #define ACT_STOP 46 |
| #define ACT_FAKEDLE0 47 |
| #define ACT_FAKEHUP 48 |
| #define ACT_FAKESDOWN 49 |
| #define ACT_SHUTDOWN 50 |
| #define ACT_PROC_CIDMODE 51 |
| #define ACT_UMODESET 52 |
| #define ACT_FAILUMODE 53 |
| #define ACT_CMODESET 54 |
| #define ACT_FAILCMODE 55 |
| #define ACT_IF_VER 56 |
| #define ACT_CMD 100 |
| |
| /* at command sequences */ |
| #define SEQ_NONE 0 |
| #define SEQ_INIT 100 |
| #define SEQ_DLE0 200 |
| #define SEQ_DLE1 250 |
| #define SEQ_CID 300 |
| #define SEQ_NOCID 350 |
| #define SEQ_HUP 400 |
| #define SEQ_DIAL 600 |
| #define SEQ_ACCEPT 720 |
| #define SEQ_SHUTDOWN 500 |
| #define SEQ_CIDMODE 10 |
| #define SEQ_UMMODE 11 |
| |
| |
| // 100: init, 200: dle0, 250:dle1, 300: get cid (dial), 350: "hup" (no cid), 400: hup, 500: reset, 600: dial, 700: ring |
| struct reply_t gigaset_tab_nocid_m10x[]= /* with dle mode */ |
| { |
| /* resp_code, min_ConState, max_ConState, parameter, new_ConState, timeout, action, command */ |
| |
| /* initialize device, set cid mode if possible */ |
| //{RSP_INIT, -1, -1,100, 900, 0, {ACT_TEST}}, |
| //{RSP_ERROR, 900,900, -1, 0, 0, {ACT_FAILINIT}}, |
| //{RSP_OK, 900,900, -1, 100, INIT_TIMEOUT, |
| // {ACT_TIMEOUT}}, |
| |
| {RSP_INIT, -1, -1,SEQ_INIT, 100, INIT_TIMEOUT, |
| {ACT_TIMEOUT}}, /* wait until device is ready */ |
| |
| {EV_TIMEOUT, 100,100, -1, 101, 3, {0}, "Z\r"}, /* device in transparent mode? try to initialize it. */ |
| {RSP_OK, 101,103, -1, 120, 5, {ACT_GETSTRING}, "+GMR\r"}, /* get version */ |
| |
| {EV_TIMEOUT, 101,101, -1, 102, 5, {0}, "Z\r"}, /* timeout => try once again. */ |
| {RSP_ERROR, 101,101, -1, 102, 5, {0}, "Z\r"}, /* error => try once again. */ |
| |
| {EV_TIMEOUT, 102,102, -1, 108, 5, {ACT_SETDLE1}, "^SDLE=0\r"}, /* timeout => try again in DLE mode. */ |
| {RSP_OK, 108,108, -1, 104,-1}, |
| {RSP_ZDLE, 104,104, 0, 103, 5, {0}, "Z\r"}, |
| {EV_TIMEOUT, 104,104, -1, 0, 0, {ACT_FAILINIT}}, |
| {RSP_ERROR, 108,108, -1, 0, 0, {ACT_FAILINIT}}, |
| |
| {EV_TIMEOUT, 108,108, -1, 105, 2, {ACT_SETDLE0, |
| ACT_HUPMODEM, |
| ACT_TIMEOUT}}, /* still timeout => connection in unimodem mode? */ |
| {EV_TIMEOUT, 105,105, -1, 103, 5, {0}, "Z\r"}, |
| |
| {RSP_ERROR, 102,102, -1, 107, 5, {0}, "^GETPRE\r"}, /* ERROR on ATZ => maybe in config mode? */ |
| {RSP_OK, 107,107, -1, 0, 0, {ACT_CONFIGMODE}}, |
| {RSP_ERROR, 107,107, -1, 0, 0, {ACT_FAILINIT}}, |
| {EV_TIMEOUT, 107,107, -1, 0, 0, {ACT_FAILINIT}}, |
| |
| {RSP_ERROR, 103,103, -1, 0, 0, {ACT_FAILINIT}}, |
| {EV_TIMEOUT, 103,103, -1, 0, 0, {ACT_FAILINIT}}, |
| |
| {RSP_STRING, 120,120, -1, 121,-1, {ACT_SETVER}}, |
| |
| {EV_TIMEOUT, 120,121, -1, 0, 0, {ACT_FAILVER, ACT_INIT}}, |
| {RSP_ERROR, 120,121, -1, 0, 0, {ACT_FAILVER, ACT_INIT}}, |
| {RSP_OK, 121,121, -1, 0, 0, {ACT_GOTVER, ACT_INIT}}, |
| #if 0 |
| {EV_TIMEOUT, 120,121, -1, 130, 5, {ACT_FAILVER}, "^SGCI=1\r"}, |
| {RSP_ERROR, 120,121, -1, 130, 5, {ACT_FAILVER}, "^SGCI=1\r"}, |
| {RSP_OK, 121,121, -1, 130, 5, {ACT_GOTVER}, "^SGCI=1\r"}, |
| |
| {RSP_OK, 130,130, -1, 0, 0, {ACT_INIT}}, |
| {RSP_ERROR, 130,130, -1, 0, 0, {ACT_FAILINIT}}, |
| {EV_TIMEOUT, 130,130, -1, 0, 0, {ACT_FAILINIT}}, |
| #endif |
| |
| /* leave dle mode */ |
| {RSP_INIT, 0, 0,SEQ_DLE0, 201, 5, {0}, "^SDLE=0\r"}, |
| {RSP_OK, 201,201, -1, 202,-1}, |
| //{RSP_ZDLE, 202,202, 0, 202, 0, {ACT_ERROR}},//DELETE |
| {RSP_ZDLE, 202,202, 0, 0, 0, {ACT_DLE0}}, |
| {RSP_NODEV, 200,249, -1, 0, 0, {ACT_FAKEDLE0}}, |
| {RSP_ERROR, 200,249, -1, 0, 0, {ACT_FAILDLE0}}, |
| {EV_TIMEOUT, 200,249, -1, 0, 0, {ACT_FAILDLE0}}, |
| |
| /* enter dle mode */ |
| {RSP_INIT, 0, 0,SEQ_DLE1, 251, 5, {0}, "^SDLE=1\r"}, |
| {RSP_OK, 251,251, -1, 252,-1}, |
| {RSP_ZDLE, 252,252, 1, 0, 0, {ACT_DLE1}}, |
| {RSP_ERROR, 250,299, -1, 0, 0, {ACT_FAILDLE1}}, |
| {EV_TIMEOUT, 250,299, -1, 0, 0, {ACT_FAILDLE1}}, |
| |
| /* incoming call */ |
| {RSP_RING, -1, -1, -1, -1,-1, {ACT_RING}}, |
| |
| /* get cid */ |
| //{RSP_INIT, 0, 0,300, 901, 0, {ACT_TEST}}, |
| //{RSP_ERROR, 901,901, -1, 0, 0, {ACT_FAILCID}}, |
| //{RSP_OK, 901,901, -1, 301, 5, {0}, "^SGCI?\r"}, |
| |
| {RSP_INIT, 0, 0,SEQ_CID, 301, 5, {0}, "^SGCI?\r"}, |
| {RSP_OK, 301,301, -1, 302,-1}, |
| {RSP_ZGCI, 302,302, -1, 0, 0, {ACT_CID}}, |
| {RSP_ERROR, 301,349, -1, 0, 0, {ACT_FAILCID}}, |
| {EV_TIMEOUT, 301,349, -1, 0, 0, {ACT_FAILCID}}, |
| |
| /* enter cid mode */ |
| {RSP_INIT, 0, 0,SEQ_CIDMODE, 150, 5, {0}, "^SGCI=1\r"}, |
| {RSP_OK, 150,150, -1, 0, 0, {ACT_CMODESET}}, |
| {RSP_ERROR, 150,150, -1, 0, 0, {ACT_FAILCMODE}}, |
| {EV_TIMEOUT, 150,150, -1, 0, 0, {ACT_FAILCMODE}}, |
| |
| /* leave cid mode */ |
| //{RSP_INIT, 0, 0,SEQ_UMMODE, 160, 5, {0}, "^SGCI=0\r"}, |
| {RSP_INIT, 0, 0,SEQ_UMMODE, 160, 5, {0}, "Z\r"}, |
| {RSP_OK, 160,160, -1, 0, 0, {ACT_UMODESET}}, |
| {RSP_ERROR, 160,160, -1, 0, 0, {ACT_FAILUMODE}}, |
| {EV_TIMEOUT, 160,160, -1, 0, 0, {ACT_FAILUMODE}}, |
| |
| /* abort getting cid */ |
| {RSP_INIT, 0, 0,SEQ_NOCID, 0, 0, {ACT_ABORTCID}}, |
| |
| /* reset */ |
| #if 0 |
| {RSP_INIT, 0, 0,SEQ_SHUTDOWN, 503, 5, {0}, "^SGCI=0\r"}, |
| {RSP_OK, 503,503, -1, 504, 5, {0}, "Z\r"}, |
| #endif |
| {RSP_INIT, 0, 0,SEQ_SHUTDOWN, 504, 5, {0}, "Z\r"}, |
| {RSP_OK, 504,504, -1, 0, 0, {ACT_SDOWN}}, |
| {RSP_ERROR, 501,599, -1, 0, 0, {ACT_FAILSDOWN}}, |
| {EV_TIMEOUT, 501,599, -1, 0, 0, {ACT_FAILSDOWN}}, |
| {RSP_NODEV, 501,599, -1, 0, 0, {ACT_FAKESDOWN}}, |
| |
| {EV_PROC_CIDMODE,-1, -1, -1, -1,-1, {ACT_PROC_CIDMODE}}, //FIXME |
| {EV_IF_LOCK, -1, -1, -1, -1,-1, {ACT_IF_LOCK}}, //FIXME |
| {EV_IF_VER, -1, -1, -1, -1,-1, {ACT_IF_VER}}, //FIXME |
| {EV_START, -1, -1, -1, -1,-1, {ACT_START}}, //FIXME |
| {EV_STOP, -1, -1, -1, -1,-1, {ACT_STOP}}, //FIXME |
| {EV_SHUTDOWN, -1, -1, -1, -1,-1, {ACT_SHUTDOWN}}, //FIXME |
| |
| /* misc. */ |
| {RSP_EMPTY, -1, -1, -1, -1,-1, {ACT_DEBUG}}, //FIXME |
| {RSP_ZCFGT, -1, -1, -1, -1,-1, {ACT_DEBUG}}, //FIXME |
| {RSP_ZCFG, -1, -1, -1, -1,-1, {ACT_DEBUG}}, //FIXME |
| {RSP_ZLOG, -1, -1, -1, -1,-1, {ACT_DEBUG}}, //FIXME |
| {RSP_ZMWI, -1, -1, -1, -1,-1, {ACT_DEBUG}}, //FIXME |
| {RSP_ZABINFO, -1, -1, -1, -1,-1, {ACT_DEBUG}}, //FIXME |
| {RSP_ZSMLSTCHG,-1, -1, -1, -1,-1, {ACT_DEBUG}}, //FIXME |
| |
| {RSP_ZCAU, -1, -1, -1, -1,-1, {ACT_ZCAU}}, |
| {RSP_NONE, -1, -1, -1, -1,-1, {ACT_DEBUG}}, |
| {RSP_ANY, -1, -1, -1, -1,-1, {ACT_WARN}}, |
| {RSP_LAST} |
| }; |
| |
| // 600: start dialing, 650: dial in progress, 800: connection is up, 700: ring, 400: hup, 750: accepted icall |
| struct reply_t gigaset_tab_cid_m10x[] = /* for M10x */ |
| { |
| /* resp_code, min_ConState, max_ConState, parameter, new_ConState, timeout, action, command */ |
| |
| /* dial */ |
| {EV_DIAL, -1, -1, -1, -1,-1, {ACT_DIAL}}, //FIXME |
| {RSP_INIT, 0, 0,SEQ_DIAL, 601, 5, {ACT_CMD+AT_BC}}, |
| {RSP_OK, 601,601, -1, 602, 5, {ACT_CMD+AT_HLC}}, |
| {RSP_NULL, 602,602, -1, 603, 5, {ACT_CMD+AT_PROTO}}, |
| {RSP_OK, 602,602, -1, 603, 5, {ACT_CMD+AT_PROTO}}, |
| {RSP_OK, 603,603, -1, 604, 5, {ACT_CMD+AT_TYPE}}, |
| {RSP_OK, 604,604, -1, 605, 5, {ACT_CMD+AT_MSN}}, |
| {RSP_OK, 605,605, -1, 606, 5, {ACT_CMD+AT_ISO}}, |
| {RSP_NULL, 605,605, -1, 606, 5, {ACT_CMD+AT_ISO}}, |
| {RSP_OK, 606,606, -1, 607, 5, {0}, "+VLS=17\r"}, /* set "Endgeraetemodus" */ |
| {RSP_OK, 607,607, -1, 608,-1}, |
| //{RSP_ZSAU, 608,608,ZSAU_PROCEEDING, 608, 0, {ACT_ERROR}},//DELETE |
| {RSP_ZSAU, 608,608,ZSAU_PROCEEDING, 609, 5, {ACT_CMD+AT_DIAL}}, |
| {RSP_OK, 609,609, -1, 650, 0, {ACT_DIALING}}, |
| |
| {RSP_ZVLS, 608,608, 17, -1,-1, {ACT_DEBUG}}, |
| {RSP_ZCTP, 609,609, -1, -1,-1, {ACT_DEBUG}}, |
| {RSP_ZCPN, 609,609, -1, -1,-1, {ACT_DEBUG}}, |
| {RSP_ERROR, 601,609, -1, 0, 0, {ACT_ABORTDIAL}}, |
| {EV_TIMEOUT, 601,609, -1, 0, 0, {ACT_ABORTDIAL}}, |
| |
| /* dialing */ |
| {RSP_ZCTP, 650,650, -1, -1,-1, {ACT_DEBUG}}, |
| {RSP_ZCPN, 650,650, -1, -1,-1, {ACT_DEBUG}}, |
| {RSP_ZSAU, 650,650,ZSAU_CALL_DELIVERED, -1,-1, {ACT_DEBUG}}, /* some devices don't send this */ |
| |
| /* connection established */ |
| {RSP_ZSAU, 650,650,ZSAU_ACTIVE, 800,-1, {ACT_CONNECT}}, //FIXME -> DLE1 |
| {RSP_ZSAU, 750,750,ZSAU_ACTIVE, 800,-1, {ACT_CONNECT}}, //FIXME -> DLE1 |
| |
| {EV_BC_OPEN, 800,800, -1, 800,-1, {ACT_NOTIFY_BC_UP}}, //FIXME new constate + timeout |
| |
| /* remote hangup */ |
| {RSP_ZSAU, 650,650,ZSAU_DISCONNECT_IND, 0, 0, {ACT_REMOTEREJECT}}, |
| {RSP_ZSAU, 750,750,ZSAU_DISCONNECT_IND, 0, 0, {ACT_REMOTEHUP}}, |
| {RSP_ZSAU, 800,800,ZSAU_DISCONNECT_IND, 0, 0, {ACT_REMOTEHUP}}, |
| |
| /* hangup */ |
| {EV_HUP, -1, -1, -1, -1,-1, {ACT_HUP}}, //FIXME |
| {RSP_INIT, -1, -1,SEQ_HUP, 401, 5, {0}, "+VLS=0\r"}, /* hang up */ //-1,-1? |
| {RSP_OK, 401,401, -1, 402, 5}, |
| {RSP_ZVLS, 402,402, 0, 403, 5}, |
| {RSP_ZSAU, 403,403,ZSAU_DISCONNECT_REQ, -1,-1, {ACT_DEBUG}}, /* if not remote hup */ |
| //{RSP_ZSAU, 403,403,ZSAU_NULL, 401, 0, {ACT_ERROR}}, //DELETE//FIXME -> DLE0 // should we do this _before_ hanging up for base driver? |
| {RSP_ZSAU, 403,403,ZSAU_NULL, 0, 0, {ACT_DISCONNECT}}, //FIXME -> DLE0 // should we do this _before_ hanging up for base driver? |
| {RSP_NODEV, 401,403, -1, 0, 0, {ACT_FAKEHUP}}, //FIXME -> DLE0 // should we do this _before_ hanging up for base driver? |
| {RSP_ERROR, 401,401, -1, 0, 0, {ACT_ABORTHUP}}, |
| {EV_TIMEOUT, 401,403, -1, 0, 0, {ACT_ABORTHUP}}, |
| |
| {EV_BC_CLOSED, 0, 0, -1, 0,-1, {ACT_NOTIFY_BC_DOWN}}, //FIXME new constate + timeout |
| |
| /* ring */ |
| {RSP_ZBC, 700,700, -1, -1,-1, {0}}, |
| {RSP_ZHLC, 700,700, -1, -1,-1, {0}}, |
| {RSP_NMBR, 700,700, -1, -1,-1, {0}}, |
| {RSP_ZCPN, 700,700, -1, -1,-1, {0}}, |
| {RSP_ZCTP, 700,700, -1, -1,-1, {0}}, |
| {EV_TIMEOUT, 700,700, -1, 720,720, {ACT_ICALL}}, |
| {EV_BC_CLOSED,720,720, -1, 0,-1, {ACT_NOTIFY_BC_DOWN}}, |
| |
| /*accept icall*/ |
| {EV_ACCEPT, -1, -1, -1, -1,-1, {ACT_ACCEPT}}, //FIXME |
| {RSP_INIT, 720,720,SEQ_ACCEPT, 721, 5, {ACT_CMD+AT_PROTO}}, |
| {RSP_OK, 721,721, -1, 722, 5, {ACT_CMD+AT_ISO}}, |
| {RSP_OK, 722,722, -1, 723, 5, {0}, "+VLS=17\r"}, /* set "Endgeraetemodus" */ |
| {RSP_OK, 723,723, -1, 724, 5, {0}}, |
| {RSP_ZVLS, 724,724, 17, 750,50, {ACT_ACCEPTED}}, |
| {RSP_ERROR, 721,729, -1, 0, 0, {ACT_ABORTACCEPT}}, |
| {EV_TIMEOUT, 721,729, -1, 0, 0, {ACT_ABORTACCEPT}}, |
| {RSP_ZSAU, 700,729,ZSAU_NULL, 0, 0, {ACT_ABORTACCEPT}}, |
| {RSP_ZSAU, 700,729,ZSAU_ACTIVE, 0, 0, {ACT_ABORTACCEPT}}, |
| {RSP_ZSAU, 700,729,ZSAU_DISCONNECT_IND, 0, 0, {ACT_ABORTACCEPT}}, |
| |
| {EV_TIMEOUT, 750,750, -1, 0, 0, {ACT_CONNTIMEOUT}}, |
| |
| /* B channel closed (general case) */ |
| {EV_BC_CLOSED, -1, -1, -1, -1,-1, {ACT_NOTIFY_BC_DOWN}}, //FIXME |
| |
| /* misc. */ |
| {EV_PROTO_L2, -1, -1, -1, -1,-1, {ACT_PROTO_L2}}, //FIXME |
| |
| {RSP_ZCON, -1, -1, -1, -1,-1, {ACT_DEBUG}}, //FIXME |
| {RSP_ZCCR, -1, -1, -1, -1,-1, {ACT_DEBUG}}, //FIXME |
| {RSP_ZAOC, -1, -1, -1, -1,-1, {ACT_DEBUG}}, //FIXME |
| {RSP_ZCSTR, -1, -1, -1, -1,-1, {ACT_DEBUG}}, //FIXME |
| |
| {RSP_ZCAU, -1, -1, -1, -1,-1, {ACT_ZCAU}}, |
| {RSP_NONE, -1, -1, -1, -1,-1, {ACT_DEBUG}}, |
| {RSP_ANY, -1, -1, -1, -1,-1, {ACT_WARN}}, |
| {RSP_LAST} |
| }; |
| |
| |
| #if 0 |
| static struct reply_t tab_nocid[]= /* no dle mode */ //FIXME |
| { |
| /* resp_code, min_ConState, max_ConState, parameter, new_ConState, timeout, action, command */ |
| |
| {RSP_ANY, -1, -1, -1, -1,-1, ACT_WARN, NULL}, |
| {RSP_LAST,0,0,0,0,0,0} |
| }; |
| |
| static struct reply_t tab_cid[] = /* no dle mode */ //FIXME |
| { |
| /* resp_code, min_ConState, max_ConState, parameter, new_ConState, timeout, action, command */ |
| |
| {RSP_ANY, -1, -1, -1, -1,-1, ACT_WARN, NULL}, |
| {RSP_LAST,0,0,0,0,0,0} |
| }; |
| #endif |
| |
| static struct resp_type_t resp_type[]= |
| { |
| /*{"", RSP_EMPTY, RT_NOTHING},*/ |
| {"OK", RSP_OK, RT_NOTHING}, |
| {"ERROR", RSP_ERROR, RT_NOTHING}, |
| {"ZSAU", RSP_ZSAU, RT_ZSAU}, |
| {"ZCAU", RSP_ZCAU, RT_ZCAU}, |
| {"RING", RSP_RING, RT_RING}, |
| {"ZGCI", RSP_ZGCI, RT_NUMBER}, |
| {"ZVLS", RSP_ZVLS, RT_NUMBER}, |
| {"ZCTP", RSP_ZCTP, RT_NUMBER}, |
| {"ZDLE", RSP_ZDLE, RT_NUMBER}, |
| {"ZCFGT", RSP_ZCFGT, RT_NUMBER}, |
| {"ZCCR", RSP_ZCCR, RT_NUMBER}, |
| {"ZMWI", RSP_ZMWI, RT_NUMBER}, |
| {"ZHLC", RSP_ZHLC, RT_STRING}, |
| {"ZBC", RSP_ZBC, RT_STRING}, |
| {"NMBR", RSP_NMBR, RT_STRING}, |
| {"ZCPN", RSP_ZCPN, RT_STRING}, |
| {"ZCON", RSP_ZCON, RT_STRING}, |
| {"ZAOC", RSP_ZAOC, RT_STRING}, |
| {"ZCSTR", RSP_ZCSTR, RT_STRING}, |
| {"ZCFG", RSP_ZCFG, RT_HEX}, |
| {"ZLOG", RSP_ZLOG, RT_NOTHING}, |
| {"ZABINFO", RSP_ZABINFO, RT_NOTHING}, |
| {"ZSMLSTCHG", RSP_ZSMLSTCHG, RT_NOTHING}, |
| {NULL,0,0} |
| }; |
| |
| /* |
| * Get integer from char-pointer |
| */ |
| static int isdn_getnum(char *p) |
| { |
| int v = -1; |
| |
| gig_dbg(DEBUG_TRANSCMD, "string: %s", p); |
| |
| while (*p >= '0' && *p <= '9') |
| v = ((v < 0) ? 0 : (v * 10)) + (int) ((*p++) - '0'); |
| if (*p) |
| v = -1; /* invalid Character */ |
| return v; |
| } |
| |
| /* |
| * Get integer from char-pointer |
| */ |
| static int isdn_gethex(char *p) |
| { |
| int v = 0; |
| int c; |
| |
| gig_dbg(DEBUG_TRANSCMD, "string: %s", p); |
| |
| if (!*p) |
| return -1; |
| |
| do { |
| if (v > (INT_MAX - 15) / 16) |
| return -1; |
| c = *p; |
| if (c >= '0' && c <= '9') |
| c -= '0'; |
| else if (c >= 'a' && c <= 'f') |
| c -= 'a' - 10; |
| else if (c >= 'A' && c <= 'F') |
| c -= 'A' - 10; |
| else |
| return -1; |
| v = v * 16 + c; |
| } while (*++p); |
| |
| return v; |
| } |
| |
| /* retrieve CID from parsed response |
| * returns 0 if no CID, -1 if invalid CID, or CID value 1..65535 |
| */ |
| static int cid_of_response(char *s) |
| { |
| int cid; |
| |
| if (s[-1] != ';') |
| return 0; /* no CID separator */ |
| cid = isdn_getnum(s); |
| if (cid < 0) |
| return 0; /* CID not numeric */ |
| if (cid < 1 || cid > 65535) |
| return -1; /* CID out of range */ |
| return cid; |
| //FIXME is ;<digit>+ at end of non-CID response really impossible? |
| } |
| |
| /* This function will be called via task queue from the callback handler. |
| * We received a modem response and have to handle it.. |
| */ |
| void gigaset_handle_modem_response(struct cardstate *cs) |
| { |
| unsigned char *argv[MAX_REC_PARAMS + 1]; |
| int params; |
| int i, j; |
| struct resp_type_t *rt; |
| int curarg; |
| unsigned long flags; |
| unsigned next, tail, head; |
| struct event_t *event; |
| int resp_code; |
| int param_type; |
| int abort; |
| size_t len; |
| int cid; |
| int rawstring; |
| |
| len = cs->cbytes; |
| if (!len) { |
| /* ignore additional LFs/CRs (M10x config mode or cx100) */ |
| gig_dbg(DEBUG_MCMD, "skipped EOL [%02X]", cs->respdata[len]); |
| return; |
| } |
| cs->respdata[len] = 0; |
| gig_dbg(DEBUG_TRANSCMD, "raw string: '%s'", cs->respdata); |
| argv[0] = cs->respdata; |
| params = 1; |
| if (cs->at_state.getstring) { |
| /* getstring only allowed without cid at the moment */ |
| cs->at_state.getstring = 0; |
| rawstring = 1; |
| cid = 0; |
| } else { |
| /* parse line */ |
| for (i = 0; i < len; i++) |
| switch (cs->respdata[i]) { |
| case ';': |
| case ',': |
| case '=': |
| if (params > MAX_REC_PARAMS) { |
| dev_warn(cs->dev, |
| "too many parameters in response\n"); |
| /* need last parameter (might be CID) */ |
| params--; |
| } |
| argv[params++] = cs->respdata + i + 1; |
| } |
| |
| rawstring = 0; |
| cid = params > 1 ? cid_of_response(argv[params-1]) : 0; |
| if (cid < 0) { |
| gigaset_add_event(cs, &cs->at_state, RSP_INVAL, |
| NULL, 0, NULL); |
| return; |
| } |
| |
| for (j = 1; j < params; ++j) |
| argv[j][-1] = 0; |
| |
| gig_dbg(DEBUG_TRANSCMD, "CMD received: %s", argv[0]); |
| if (cid) { |
| --params; |
| gig_dbg(DEBUG_TRANSCMD, "CID: %s", argv[params]); |
| } |
| gig_dbg(DEBUG_TRANSCMD, "available params: %d", params - 1); |
| for (j = 1; j < params; j++) |
| gig_dbg(DEBUG_TRANSCMD, "param %d: %s", j, argv[j]); |
| } |
| |
| spin_lock_irqsave(&cs->ev_lock, flags); |
| head = cs->ev_head; |
| tail = cs->ev_tail; |
| |
| abort = 1; |
| curarg = 0; |
| while (curarg < params) { |
| next = (tail + 1) % MAX_EVENTS; |
| if (unlikely(next == head)) { |
| dev_err(cs->dev, "event queue full\n"); |
| break; |
| } |
| |
| event = cs->events + tail; |
| event->at_state = NULL; |
| event->cid = cid; |
| event->ptr = NULL; |
| event->arg = NULL; |
| tail = next; |
| |
| if (rawstring) { |
| resp_code = RSP_STRING; |
| param_type = RT_STRING; |
| } else { |
| for (rt = resp_type; rt->response; ++rt) |
| if (!strcmp(argv[curarg], rt->response)) |
| break; |
| |
| if (!rt->response) { |
| event->type = RSP_UNKNOWN; |
| dev_warn(cs->dev, |
| "unknown modem response: %s\n", |
| argv[curarg]); |
| break; |
| } |
| |
| resp_code = rt->resp_code; |
| param_type = rt->type; |
| ++curarg; |
| } |
| |
| event->type = resp_code; |
| |
| switch (param_type) { |
| case RT_NOTHING: |
| break; |
| case RT_RING: |
| if (!cid) { |
| dev_err(cs->dev, |
| "received RING without CID!\n"); |
| event->type = RSP_INVAL; |
| abort = 1; |
| } else { |
| event->cid = 0; |
| event->parameter = cid; |
| abort = 0; |
| } |
| break; |
| case RT_ZSAU: |
| if (curarg >= params) { |
| event->parameter = ZSAU_NONE; |
| break; |
| } |
| if (!strcmp(argv[curarg], "OUTGOING_CALL_PROCEEDING")) |
| event->parameter = ZSAU_OUTGOING_CALL_PROCEEDING; |
| else if (!strcmp(argv[curarg], "CALL_DELIVERED")) |
| event->parameter = ZSAU_CALL_DELIVERED; |
| else if (!strcmp(argv[curarg], "ACTIVE")) |
| event->parameter = ZSAU_ACTIVE; |
| else if (!strcmp(argv[curarg], "DISCONNECT_IND")) |
| event->parameter = ZSAU_DISCONNECT_IND; |
| else if (!strcmp(argv[curarg], "NULL")) |
| event->parameter = ZSAU_NULL; |
| else if (!strcmp(argv[curarg], "DISCONNECT_REQ")) |
| event->parameter = ZSAU_DISCONNECT_REQ; |
| else { |
| event->parameter = ZSAU_UNKNOWN; |
| dev_warn(cs->dev, |
| "%s: unknown parameter %s after ZSAU\n", |
| __func__, argv[curarg]); |
| } |
| ++curarg; |
| break; |
| case RT_STRING: |
| if (curarg < params) { |
| event->ptr = kstrdup(argv[curarg], GFP_ATOMIC); |
| if (!event->ptr) |
| dev_err(cs->dev, "out of memory\n"); |
| ++curarg; |
| } |
| #ifdef CONFIG_GIGASET_DEBUG |
| if (!event->ptr) |
| gig_dbg(DEBUG_CMD, "string==NULL"); |
| else |
| gig_dbg(DEBUG_CMD, "string==%s", |
| (char *) event->ptr); |
| #endif |
| break; |
| case RT_ZCAU: |
| event->parameter = -1; |
| if (curarg + 1 < params) { |
| i = isdn_gethex(argv[curarg]); |
| j = isdn_gethex(argv[curarg + 1]); |
| if (i >= 0 && i < 256 && j >= 0 && j < 256) |
| event->parameter = (unsigned) i << 8 |
| | j; |
| curarg += 2; |
| } else |
| curarg = params - 1; |
| break; |
| case RT_NUMBER: |
| case RT_HEX: |
| if (curarg < params) { |
| if (param_type == RT_HEX) |
| event->parameter = |
| isdn_gethex(argv[curarg]); |
| else |
| event->parameter = |
| isdn_getnum(argv[curarg]); |
| ++curarg; |
| } else |
| event->parameter = -1; |
| #ifdef CONFIG_GIGASET_DEBUG |
| gig_dbg(DEBUG_CMD, "parameter==%d", event->parameter); |
| #endif |
| break; |
| } |
| |
| if (resp_code == RSP_ZDLE) |
| cs->dle = event->parameter; |
| |
| if (abort) |
| break; |
| } |
| |
| cs->ev_tail = tail; |
| spin_unlock_irqrestore(&cs->ev_lock, flags); |
| |
| if (curarg != params) |
| gig_dbg(DEBUG_ANY, |
| "invalid number of processed parameters: %d/%d", |
| curarg, params); |
| } |
| EXPORT_SYMBOL_GPL(gigaset_handle_modem_response); |
| |
| /* disconnect |
| * process closing of connection associated with given AT state structure |
| */ |
| static void disconnect(struct at_state_t **at_state_p) |
| { |
| unsigned long flags; |
| struct bc_state *bcs = (*at_state_p)->bcs; |
| struct cardstate *cs = (*at_state_p)->cs; |
| |
| spin_lock_irqsave(&cs->lock, flags); |
| ++(*at_state_p)->seq_index; |
| |
| /* revert to selected idle mode */ |
| if (!cs->cidmode) { |
| cs->at_state.pending_commands |= PC_UMMODE; |
| atomic_set(&cs->commands_pending, 1); //FIXME |
| gig_dbg(DEBUG_CMD, "Scheduling PC_UMMODE"); |
| } |
| spin_unlock_irqrestore(&cs->lock, flags); |
| |
| if (bcs) { |
| /* B channel assigned: invoke hardware specific handler */ |
| cs->ops->close_bchannel(bcs); |
| } else { |
| /* no B channel assigned: just deallocate */ |
| spin_lock_irqsave(&cs->lock, flags); |
| list_del(&(*at_state_p)->list); |
| kfree(*at_state_p); |
| *at_state_p = NULL; |
| spin_unlock_irqrestore(&cs->lock, flags); |
| } |
| } |
| |
| /* get_free_channel |
| * get a free AT state structure: either one of those associated with the |
| * B channels of the Gigaset device, or if none of those is available, |
| * a newly allocated one with bcs=NULL |
| * The structure should be freed by calling disconnect() after use. |
| */ |
| static inline struct at_state_t *get_free_channel(struct cardstate *cs, |
| int cid) |
| /* cids: >0: siemens-cid |
| 0: without cid |
| -1: no cid assigned yet |
| */ |
| { |
| unsigned long flags; |
| int i; |
| struct at_state_t *ret; |
| |
| for (i = 0; i < cs->channels; ++i) |
| if (gigaset_get_channel(cs->bcs + i)) { |
| ret = &cs->bcs[i].at_state; |
| ret->cid = cid; |
| return ret; |
| } |
| |
| spin_lock_irqsave(&cs->lock, flags); |
| ret = kmalloc(sizeof(struct at_state_t), GFP_ATOMIC); |
| if (ret) { |
| gigaset_at_init(ret, NULL, cs, cid); |
| list_add(&ret->list, &cs->temp_at_states); |
| } |
| spin_unlock_irqrestore(&cs->lock, flags); |
| return ret; |
| } |
| |
| static void init_failed(struct cardstate *cs, int mode) |
| { |
| int i; |
| struct at_state_t *at_state; |
| |
| cs->at_state.pending_commands &= ~PC_INIT; |
| atomic_set(&cs->mode, mode); |
| atomic_set(&cs->mstate, MS_UNINITIALIZED); |
| gigaset_free_channels(cs); |
| for (i = 0; i < cs->channels; ++i) { |
| at_state = &cs->bcs[i].at_state; |
| if (at_state->pending_commands & PC_CID) { |
| at_state->pending_commands &= ~PC_CID; |
| at_state->pending_commands |= PC_NOCID; |
| atomic_set(&cs->commands_pending, 1); |
| } |
| } |
| } |
| |
| static void schedule_init(struct cardstate *cs, int state) |
| { |
| if (cs->at_state.pending_commands & PC_INIT) { |
| gig_dbg(DEBUG_CMD, "not scheduling PC_INIT again"); |
| return; |
| } |
| atomic_set(&cs->mstate, state); |
| atomic_set(&cs->mode, M_UNKNOWN); |
| gigaset_block_channels(cs); |
| cs->at_state.pending_commands |= PC_INIT; |
| atomic_set(&cs->commands_pending, 1); |
| gig_dbg(DEBUG_CMD, "Scheduling PC_INIT"); |
| } |
| |
| /* Add "AT" to a command, add the cid, dle encode it, send the result to the |
| hardware. */ |
| static void send_command(struct cardstate *cs, const char *cmd, int cid, |
| int dle, gfp_t kmallocflags) |
| { |
| size_t cmdlen, buflen; |
| char *cmdpos, *cmdbuf, *cmdtail; |
| |
| cmdlen = strlen(cmd); |
| buflen = 11 + cmdlen; |
| if (unlikely(buflen <= cmdlen)) { |
| dev_err(cs->dev, "integer overflow in buflen\n"); |
| return; |
| } |
| |
| cmdbuf = kmalloc(buflen, kmallocflags); |
| if (unlikely(!cmdbuf)) { |
| dev_err(cs->dev, "out of memory\n"); |
| return; |
| } |
| |
| cmdpos = cmdbuf + 9; |
| cmdtail = cmdpos + cmdlen; |
| memcpy(cmdpos, cmd, cmdlen); |
| |
| if (cid > 0 && cid <= 65535) { |
| do { |
| *--cmdpos = '0' + cid % 10; |
| cid /= 10; |
| ++cmdlen; |
| } while (cid); |
| } |
| |
| cmdlen += 2; |
| *--cmdpos = 'T'; |
| *--cmdpos = 'A'; |
| |
| if (dle) { |
| cmdlen += 4; |
| *--cmdpos = '('; |
| *--cmdpos = 0x10; |
| *cmdtail++ = 0x10; |
| *cmdtail++ = ')'; |
| } |
| |
| cs->ops->write_cmd(cs, cmdpos, cmdlen, NULL); |
| kfree(cmdbuf); |
| } |
| |
| static struct at_state_t *at_state_from_cid(struct cardstate *cs, int cid) |
| { |
| struct at_state_t *at_state; |
| int i; |
| unsigned long flags; |
| |
| if (cid == 0) |
| return &cs->at_state; |
| |
| for (i = 0; i < cs->channels; ++i) |
| if (cid == cs->bcs[i].at_state.cid) |
| return &cs->bcs[i].at_state; |
| |
| spin_lock_irqsave(&cs->lock, flags); |
| |
| list_for_each_entry(at_state, &cs->temp_at_states, list) |
| if (cid == at_state->cid) { |
| spin_unlock_irqrestore(&cs->lock, flags); |
| return at_state; |
| } |
| |
| spin_unlock_irqrestore(&cs->lock, flags); |
| |
| return NULL; |
| } |
| |
| static void bchannel_down(struct bc_state *bcs) |
| { |
| if (bcs->chstate & CHS_B_UP) { |
| bcs->chstate &= ~CHS_B_UP; |
| gigaset_i4l_channel_cmd(bcs, ISDN_STAT_BHUP); |
| } |
| |
| if (bcs->chstate & (CHS_D_UP | CHS_NOTIFY_LL)) { |
| bcs->chstate &= ~(CHS_D_UP | CHS_NOTIFY_LL); |
| gigaset_i4l_channel_cmd(bcs, ISDN_STAT_DHUP); |
| } |
| |
| gigaset_free_channel(bcs); |
| |
| gigaset_bcs_reinit(bcs); |
| } |
| |
| static void bchannel_up(struct bc_state *bcs) |
| { |
| if (!(bcs->chstate & CHS_D_UP)) { |
| dev_notice(bcs->cs->dev, "%s: D channel not up\n", __func__); |
| bcs->chstate |= CHS_D_UP; |
| gigaset_i4l_channel_cmd(bcs, ISDN_STAT_DCONN); |
| } |
| |
| if (bcs->chstate & CHS_B_UP) { |
| dev_notice(bcs->cs->dev, "%s: B channel already up\n", |
| __func__); |
| return; |
| } |
| |
| bcs->chstate |= CHS_B_UP; |
| gigaset_i4l_channel_cmd(bcs, ISDN_STAT_BCONN); |
| } |
| |
| static void start_dial(struct at_state_t *at_state, void *data, unsigned seq_index) |
| { |
| struct bc_state *bcs = at_state->bcs; |
| struct cardstate *cs = at_state->cs; |
| int retval; |
| unsigned long flags; |
| |
| bcs->chstate |= CHS_NOTIFY_LL; |
| |
| spin_lock_irqsave(&cs->lock, flags); |
| if (at_state->seq_index != seq_index) { |
| spin_unlock_irqrestore(&cs->lock, flags); |
| goto error; |
| } |
| spin_unlock_irqrestore(&cs->lock, flags); |
| |
| retval = gigaset_isdn_setup_dial(at_state, data); |
| if (retval != 0) |
| goto error; |
| |
| |
| at_state->pending_commands |= PC_CID; |
| gig_dbg(DEBUG_CMD, "Scheduling PC_CID"); |
| atomic_set(&cs->commands_pending, 1); |
| return; |
| |
| error: |
| at_state->pending_commands |= PC_NOCID; |
| gig_dbg(DEBUG_CMD, "Scheduling PC_NOCID"); |
| atomic_set(&cs->commands_pending, 1); |
| return; |
| } |
| |
| static void start_accept(struct at_state_t *at_state) |
| { |
| struct cardstate *cs = at_state->cs; |
| int retval; |
| |
| retval = gigaset_isdn_setup_accept(at_state); |
| |
| if (retval == 0) { |
| at_state->pending_commands |= PC_ACCEPT; |
| gig_dbg(DEBUG_CMD, "Scheduling PC_ACCEPT"); |
| atomic_set(&cs->commands_pending, 1); |
| } else { |
| //FIXME |
| at_state->pending_commands |= PC_HUP; |
| gig_dbg(DEBUG_CMD, "Scheduling PC_HUP"); |
| atomic_set(&cs->commands_pending, 1); |
| } |
| } |
| |
| static void do_start(struct cardstate *cs) |
| { |
| gigaset_free_channels(cs); |
| |
| if (atomic_read(&cs->mstate) != MS_LOCKED) |
| schedule_init(cs, MS_INIT); |
| |
| cs->isdn_up = 1; |
| gigaset_i4l_cmd(cs, ISDN_STAT_RUN); |
| // FIXME: not in locked mode |
| // FIXME 2: only after init sequence |
| |
| cs->waiting = 0; |
| wake_up(&cs->waitqueue); |
| } |
| |
| static void finish_shutdown(struct cardstate *cs) |
| { |
| if (atomic_read(&cs->mstate) != MS_LOCKED) { |
| atomic_set(&cs->mstate, MS_UNINITIALIZED); |
| atomic_set(&cs->mode, M_UNKNOWN); |
| } |
| |
| /* Tell the LL that the device is not available .. */ |
| if (cs->isdn_up) { |
| cs->isdn_up = 0; |
| gigaset_i4l_cmd(cs, ISDN_STAT_STOP); |
| } |
| |
| /* The rest is done by cleanup_cs () in user mode. */ |
| |
| cs->cmd_result = -ENODEV; |
| cs->waiting = 0; |
| wake_up(&cs->waitqueue); |
| } |
| |
| static void do_shutdown(struct cardstate *cs) |
| { |
| gigaset_block_channels(cs); |
| |
| if (atomic_read(&cs->mstate) == MS_READY) { |
| atomic_set(&cs->mstate, MS_SHUTDOWN); |
| cs->at_state.pending_commands |= PC_SHUTDOWN; |
| atomic_set(&cs->commands_pending, 1); |
| gig_dbg(DEBUG_CMD, "Scheduling PC_SHUTDOWN"); |
| } else |
| finish_shutdown(cs); |
| } |
| |
| static void do_stop(struct cardstate *cs) |
| { |
| unsigned long flags; |
| |
| spin_lock_irqsave(&cs->lock, flags); |
| cs->connected = 0; |
| spin_unlock_irqrestore(&cs->lock, flags); |
| |
| do_shutdown(cs); |
| } |
| |
| /* Entering cid mode or getting a cid failed: |
| * try to initialize the device and try again. |
| * |
| * channel >= 0: getting cid for the channel failed |
| * channel < 0: entering cid mode failed |
| * |
| * returns 0 on failure |
| */ |
| static int reinit_and_retry(struct cardstate *cs, int channel) |
| { |
| int i; |
| |
| if (--cs->retry_count <= 0) |
| return 0; |
| |
| for (i = 0; i < cs->channels; ++i) |
| if (cs->bcs[i].at_state.cid > 0) |
| return 0; |
| |
| if (channel < 0) |
| dev_warn(cs->dev, |
| "Could not enter cid mode. Reinit device and try again.\n"); |
| else { |
| dev_warn(cs->dev, |
| "Could not get a call id. Reinit device and try again.\n"); |
| cs->bcs[channel].at_state.pending_commands |= PC_CID; |
| } |
| schedule_init(cs, MS_INIT); |
| return 1; |
| } |
| |
| static int at_state_invalid(struct cardstate *cs, |
| struct at_state_t *test_ptr) |
| { |
| unsigned long flags; |
| unsigned channel; |
| struct at_state_t *at_state; |
| int retval = 0; |
| |
| spin_lock_irqsave(&cs->lock, flags); |
| |
| if (test_ptr == &cs->at_state) |
| goto exit; |
| |
| list_for_each_entry(at_state, &cs->temp_at_states, list) |
| if (at_state == test_ptr) |
| goto exit; |
| |
| for (channel = 0; channel < cs->channels; ++channel) |
| if (&cs->bcs[channel].at_state == test_ptr) |
| goto exit; |
| |
| retval = 1; |
| exit: |
| spin_unlock_irqrestore(&cs->lock, flags); |
| return retval; |
| } |
| |
| static void handle_icall(struct cardstate *cs, struct bc_state *bcs, |
| struct at_state_t **p_at_state) |
| { |
| int retval; |
| struct at_state_t *at_state = *p_at_state; |
| |
| retval = gigaset_isdn_icall(at_state); |
| switch (retval) { |
| case ICALL_ACCEPT: |
| break; |
| default: |
| dev_err(cs->dev, "internal error: disposition=%d\n", retval); |
| /* --v-- fall through --v-- */ |
| case ICALL_IGNORE: |
| case ICALL_REJECT: |
| /* hang up actively |
| * Device doc says that would reject the call. |
| * In fact it doesn't. |
| */ |
| at_state->pending_commands |= PC_HUP; |
| atomic_set(&cs->commands_pending, 1); |
| break; |
| } |
| } |
| |
| static int do_lock(struct cardstate *cs) |
| { |
| int mode; |
| int i; |
| |
| switch (atomic_read(&cs->mstate)) { |
| case MS_UNINITIALIZED: |
| case MS_READY: |
| if (cs->cur_at_seq || !list_empty(&cs->temp_at_states) || |
| cs->at_state.pending_commands) |
| return -EBUSY; |
| |
| for (i = 0; i < cs->channels; ++i) |
| if (cs->bcs[i].at_state.pending_commands) |
| return -EBUSY; |
| |
| if (!gigaset_get_channels(cs)) |
| return -EBUSY; |
| |
| break; |
| case MS_LOCKED: |
| //retval = -EACCES; |
| break; |
| default: |
| return -EBUSY; |
| } |
| |
| mode = atomic_read(&cs->mode); |
| atomic_set(&cs->mstate, MS_LOCKED); |
| atomic_set(&cs->mode, M_UNKNOWN); |
| |
| return mode; |
| } |
| |
| static int do_unlock(struct cardstate *cs) |
| { |
| if (atomic_read(&cs->mstate) != MS_LOCKED) |
| return -EINVAL; |
| |
| atomic_set(&cs->mstate, MS_UNINITIALIZED); |
| atomic_set(&cs->mode, M_UNKNOWN); |
| gigaset_free_channels(cs); |
| if (cs->connected) |
| schedule_init(cs, MS_INIT); |
| |
| return 0; |
| } |
| |
| static void do_action(int action, struct cardstate *cs, |
| struct bc_state *bcs, |
| struct at_state_t **p_at_state, char **pp_command, |
| int *p_genresp, int *p_resp_code, |
| struct event_t *ev) |
| { |
| struct at_state_t *at_state = *p_at_state; |
| struct at_state_t *at_state2; |
| unsigned long flags; |
| |
| int channel; |
| |
| unsigned char *s, *e; |
| int i; |
| unsigned long val; |
| |
| switch (action) { |
| case ACT_NOTHING: |
| break; |
| case ACT_TIMEOUT: |
| at_state->waiting = 1; |
| break; |
| case ACT_INIT: |
| cs->at_state.pending_commands &= ~PC_INIT; |
| cs->cur_at_seq = SEQ_NONE; |
| atomic_set(&cs->mode, M_UNIMODEM); |
| spin_lock_irqsave(&cs->lock, flags); |
| if (!cs->cidmode) { |
| spin_unlock_irqrestore(&cs->lock, flags); |
| gigaset_free_channels(cs); |
| atomic_set(&cs->mstate, MS_READY); |
| break; |
| } |
| spin_unlock_irqrestore(&cs->lock, flags); |
| cs->at_state.pending_commands |= PC_CIDMODE; |
| atomic_set(&cs->commands_pending, 1); |
| gig_dbg(DEBUG_CMD, "Scheduling PC_CIDMODE"); |
| break; |
| case ACT_FAILINIT: |
| dev_warn(cs->dev, "Could not initialize the device.\n"); |
| cs->dle = 0; |
| init_failed(cs, M_UNKNOWN); |
| cs->cur_at_seq = SEQ_NONE; |
| break; |
| case ACT_CONFIGMODE: |
| init_failed(cs, M_CONFIG); |
| cs->cur_at_seq = SEQ_NONE; |
| break; |
| case ACT_SETDLE1: |
| cs->dle = 1; |
| /* cs->inbuf[0].inputstate |= INS_command | INS_DLE_command; */ |
| cs->inbuf[0].inputstate &= |
| ~(INS_command | INS_DLE_command); |
| break; |
| case ACT_SETDLE0: |
| cs->dle = 0; |
| cs->inbuf[0].inputstate = |
| (cs->inbuf[0].inputstate & ~INS_DLE_command) |
| | INS_command; |
| break; |
| case ACT_CMODESET: |
| if (atomic_read(&cs->mstate) == MS_INIT || |
| atomic_read(&cs->mstate) == MS_RECOVER) { |
| gigaset_free_channels(cs); |
| atomic_set(&cs->mstate, MS_READY); |
| } |
| atomic_set(&cs->mode, M_CID); |
| cs->cur_at_seq = SEQ_NONE; |
| break; |
| case ACT_UMODESET: |
| atomic_set(&cs->mode, M_UNIMODEM); |
| cs->cur_at_seq = SEQ_NONE; |
| break; |
| case ACT_FAILCMODE: |
| cs->cur_at_seq = SEQ_NONE; |
| if (atomic_read(&cs->mstate) == MS_INIT || |
| atomic_read(&cs->mstate) == MS_RECOVER) { |
| init_failed(cs, M_UNKNOWN); |
| break; |
| } |
| if (!reinit_and_retry(cs, -1)) |
| schedule_init(cs, MS_RECOVER); |
| break; |
| case ACT_FAILUMODE: |
| cs->cur_at_seq = SEQ_NONE; |
| schedule_init(cs, MS_RECOVER); |
| break; |
| case ACT_HUPMODEM: |
| /* send "+++" (hangup in unimodem mode) */ |
| if (cs->connected) |
| cs->ops->write_cmd(cs, "+++", 3, NULL); |
| break; |
| case ACT_RING: |
| /* get fresh AT state structure for new CID */ |
| at_state2 = get_free_channel(cs, ev->parameter); |
| if (!at_state2) { |
| dev_warn(cs->dev, |
| "RING ignored: could not allocate channel structure\n"); |
| break; |
| } |
| |
| /* initialize AT state structure |
| * note that bcs may be NULL if no B channel is free |
| */ |
| at_state2->ConState = 700; |
| kfree(at_state2->str_var[STR_NMBR]); |
| at_state2->str_var[STR_NMBR] = NULL; |
| kfree(at_state2->str_var[STR_ZCPN]); |
| at_state2->str_var[STR_ZCPN] = NULL; |
| kfree(at_state2->str_var[STR_ZBC]); |
| at_state2->str_var[STR_ZBC] = NULL; |
| kfree(at_state2->str_var[STR_ZHLC]); |
| at_state2->str_var[STR_ZHLC] = NULL; |
| at_state2->int_var[VAR_ZCTP] = -1; |
| |
| spin_lock_irqsave(&cs->lock, flags); |
| at_state2->timer_expires = RING_TIMEOUT; |
| at_state2->timer_active = 1; |
| spin_unlock_irqrestore(&cs->lock, flags); |
| break; |
| case ACT_ICALL: |
| handle_icall(cs, bcs, p_at_state); |
| break; |
| case ACT_FAILSDOWN: |
| dev_warn(cs->dev, "Could not shut down the device.\n"); |
| /* fall through */ |
| case ACT_FAKESDOWN: |
| case ACT_SDOWN: |
| cs->cur_at_seq = SEQ_NONE; |
| finish_shutdown(cs); |
| break; |
| case ACT_CONNECT: |
| if (cs->onechannel) { |
| at_state->pending_commands |= PC_DLE1; |
| atomic_set(&cs->commands_pending, 1); |
| break; |
| } |
| bcs->chstate |= CHS_D_UP; |
| gigaset_i4l_channel_cmd(bcs, ISDN_STAT_DCONN); |
| cs->ops->init_bchannel(bcs); |
| break; |
| case ACT_DLE1: |
| cs->cur_at_seq = SEQ_NONE; |
| bcs = cs->bcs + cs->curchannel; |
| |
| bcs->chstate |= CHS_D_UP; |
| gigaset_i4l_channel_cmd(bcs, ISDN_STAT_DCONN); |
| cs->ops->init_bchannel(bcs); |
| break; |
| case ACT_FAKEHUP: |
| at_state->int_var[VAR_ZSAU] = ZSAU_NULL; |
| /* fall through */ |
| case ACT_DISCONNECT: |
| cs->cur_at_seq = SEQ_NONE; |
| at_state->cid = -1; |
| if (bcs && cs->onechannel && cs->dle) { |
| /* Check for other open channels not needed: |
| * DLE only used for M10x with one B channel. |
| */ |
| at_state->pending_commands |= PC_DLE0; |
| atomic_set(&cs->commands_pending, 1); |
| } else |
| disconnect(p_at_state); |
| break; |
| case ACT_FAKEDLE0: |
| at_state->int_var[VAR_ZDLE] = 0; |
| cs->dle = 0; |
| /* fall through */ |
| case ACT_DLE0: |
| cs->cur_at_seq = SEQ_NONE; |
| at_state2 = &cs->bcs[cs->curchannel].at_state; |
| disconnect(&at_state2); |
| break; |
| case ACT_ABORTHUP: |
| cs->cur_at_seq = SEQ_NONE; |
| dev_warn(cs->dev, "Could not hang up.\n"); |
| at_state->cid = -1; |
| if (bcs && cs->onechannel) |
| at_state->pending_commands |= PC_DLE0; |
| else |
| disconnect(p_at_state); |
| schedule_init(cs, MS_RECOVER); |
| break; |
| case ACT_FAILDLE0: |
| cs->cur_at_seq = SEQ_NONE; |
| dev_warn(cs->dev, "Could not leave DLE mode.\n"); |
| at_state2 = &cs->bcs[cs->curchannel].at_state; |
| disconnect(&at_state2); |
| schedule_init(cs, MS_RECOVER); |
| break; |
| case ACT_FAILDLE1: |
| cs->cur_at_seq = SEQ_NONE; |
| dev_warn(cs->dev, |
| "Could not enter DLE mode. Trying to hang up.\n"); |
| channel = cs->curchannel; |
| cs->bcs[channel].at_state.pending_commands |= PC_HUP; |
| atomic_set(&cs->commands_pending, 1); |
| break; |
| |
| case ACT_CID: /* got cid; start dialing */ |
| cs->cur_at_seq = SEQ_NONE; |
| channel = cs->curchannel; |
| if (ev->parameter > 0 && ev->parameter <= 65535) { |
| cs->bcs[channel].at_state.cid = ev->parameter; |
| cs->bcs[channel].at_state.pending_commands |= |
| PC_DIAL; |
| atomic_set(&cs->commands_pending, 1); |
| break; |
| } |
| /* fall through */ |
| case ACT_FAILCID: |
| cs->cur_at_seq = SEQ_NONE; |
| channel = cs->curchannel; |
| if (!reinit_and_retry(cs, channel)) { |
| dev_warn(cs->dev, |
| "Could not get a call ID. Cannot dial.\n"); |
| at_state2 = &cs->bcs[channel].at_state; |
| disconnect(&at_state2); |
| } |
| break; |
| case ACT_ABORTCID: |
| cs->cur_at_seq = SEQ_NONE; |
| at_state2 = &cs->bcs[cs->curchannel].at_state; |
| disconnect(&at_state2); |
| break; |
| |
| case ACT_DIALING: |
| case ACT_ACCEPTED: |
| cs->cur_at_seq = SEQ_NONE; |
| break; |
| |
| case ACT_ABORTACCEPT: /* hangup/error/timeout during ICALL processing */ |
| disconnect(p_at_state); |
| break; |
| |
| case ACT_ABORTDIAL: /* error/timeout during dial preparation */ |
| cs->cur_at_seq = SEQ_NONE; |
| at_state->pending_commands |= PC_HUP; |
| atomic_set(&cs->commands_pending, 1); |
| break; |
| |
| case ACT_REMOTEREJECT: /* DISCONNECT_IND after dialling */ |
| case ACT_CONNTIMEOUT: /* timeout waiting for ZSAU=ACTIVE */ |
| case ACT_REMOTEHUP: /* DISCONNECT_IND with established connection */ |
| at_state->pending_commands |= PC_HUP; |
| atomic_set(&cs->commands_pending, 1); |
| break; |
| case ACT_GETSTRING: /* warning: RING, ZDLE, ... |
| are not handled properly anymore */ |
| at_state->getstring = 1; |
| break; |
| case ACT_SETVER: |
| if (!ev->ptr) { |
| *p_genresp = 1; |
| *p_resp_code = RSP_ERROR; |
| break; |
| } |
| s = ev->ptr; |
| |
| if (!strcmp(s, "OK")) { |
| *p_genresp = 1; |
| *p_resp_code = RSP_ERROR; |
| break; |
| } |
| |
| for (i = 0; i < 4; ++i) { |
| val = simple_strtoul(s, (char **) &e, 10); |
| if (val > INT_MAX || e == s) |
| break; |
| if (i == 3) { |
| if (*e) |
| break; |
| } else if (*e != '.') |
| break; |
| else |
| s = e + 1; |
| cs->fwver[i] = val; |
| } |
| if (i != 4) { |
| *p_genresp = 1; |
| *p_resp_code = RSP_ERROR; |
| break; |
| } |
| /*at_state->getstring = 1;*/ |
| cs->gotfwver = 0; |
| break; |
| case ACT_GOTVER: |
| if (cs->gotfwver == 0) { |
| cs->gotfwver = 1; |
| gig_dbg(DEBUG_ANY, |
| "firmware version %02d.%03d.%02d.%02d", |
| cs->fwver[0], cs->fwver[1], |
| cs->fwver[2], cs->fwver[3]); |
| break; |
| } |
| /* fall through */ |
| case ACT_FAILVER: |
| cs->gotfwver = -1; |
| dev_err(cs->dev, "could not read firmware version.\n"); |
| break; |
| #ifdef CONFIG_GIGASET_DEBUG |
| case ACT_ERROR: |
| *p_genresp = 1; |
| *p_resp_code = RSP_ERROR; |
| break; |
| case ACT_TEST: |
| { |
| static int count = 3; //2; //1; |
| *p_genresp = 1; |
| *p_resp_code = count ? RSP_ERROR : RSP_OK; |
| if (count > 0) |
| --count; |
| } |
| break; |
| #endif |
| case ACT_DEBUG: |
| gig_dbg(DEBUG_ANY, "%s: resp_code %d in ConState %d", |
| __func__, ev->type, at_state->ConState); |
| break; |
| case ACT_WARN: |
| dev_warn(cs->dev, "%s: resp_code %d in ConState %d!\n", |
| __func__, ev->type, at_state->ConState); |
| break; |
| case ACT_ZCAU: |
| dev_warn(cs->dev, "cause code %04x in connection state %d.\n", |
| ev->parameter, at_state->ConState); |
| break; |
| |
| /* events from the LL */ |
| case ACT_DIAL: |
| start_dial(at_state, ev->ptr, ev->parameter); |
| break; |
| case ACT_ACCEPT: |
| start_accept(at_state); |
| break; |
| case ACT_PROTO_L2: |
| gig_dbg(DEBUG_CMD, "set protocol to %u", |
| (unsigned) ev->parameter); |
| at_state->bcs->proto2 = ev->parameter; |
| break; |
| case ACT_HUP: |
| at_state->pending_commands |= PC_HUP; |
| atomic_set(&cs->commands_pending, 1); |
| gig_dbg(DEBUG_CMD, "Scheduling PC_HUP"); |
| break; |
| |
| /* hotplug events */ |
| case ACT_STOP: |
| do_stop(cs); |
| break; |
| case ACT_START: |
| do_start(cs); |
| break; |
| |
| /* events from the interface */ // FIXME without ACT_xxxx? |
| case ACT_IF_LOCK: |
| cs->cmd_result = ev->parameter ? do_lock(cs) : do_unlock(cs); |
| cs->waiting = 0; |
| wake_up(&cs->waitqueue); |
| break; |
| case ACT_IF_VER: |
| if (ev->parameter != 0) |
| cs->cmd_result = -EINVAL; |
| else if (cs->gotfwver != 1) { |
| cs->cmd_result = -ENOENT; |
| } else { |
| memcpy(ev->arg, cs->fwver, sizeof cs->fwver); |
| cs->cmd_result = 0; |
| } |
| cs->waiting = 0; |
| wake_up(&cs->waitqueue); |
| break; |
| |
| /* events from the proc file system */ // FIXME without ACT_xxxx? |
| case ACT_PROC_CIDMODE: |
| spin_lock_irqsave(&cs->lock, flags); |
| if (ev->parameter != cs->cidmode) { |
| cs->cidmode = ev->parameter; |
| if (ev->parameter) { |
| cs->at_state.pending_commands |= PC_CIDMODE; |
| gig_dbg(DEBUG_CMD, "Scheduling PC_CIDMODE"); |
| } else { |
| cs->at_state.pending_commands |= PC_UMMODE; |
| gig_dbg(DEBUG_CMD, "Scheduling PC_UMMODE"); |
| } |
| atomic_set(&cs->commands_pending, 1); |
| } |
| spin_unlock_irqrestore(&cs->lock, flags); |
| cs->waiting = 0; |
| wake_up(&cs->waitqueue); |
| break; |
| |
| /* events from the hardware drivers */ |
| case ACT_NOTIFY_BC_DOWN: |
| bchannel_down(bcs); |
| break; |
| case ACT_NOTIFY_BC_UP: |
| bchannel_up(bcs); |
| break; |
| case ACT_SHUTDOWN: |
| do_shutdown(cs); |
| break; |
| |
| |
| default: |
| if (action >= ACT_CMD && action < ACT_CMD + AT_NUM) { |
| *pp_command = at_state->bcs->commands[action - ACT_CMD]; |
| if (!*pp_command) { |
| *p_genresp = 1; |
| *p_resp_code = RSP_NULL; |
| } |
| } else |
| dev_err(cs->dev, "%s: action==%d!\n", __func__, action); |
| } |
| } |
| |
| /* State machine to do the calling and hangup procedure */ |
| static void process_event(struct cardstate *cs, struct event_t *ev) |
| { |
| struct bc_state *bcs; |
| char *p_command = NULL; |
| struct reply_t *rep; |
| int rcode; |
| int genresp = 0; |
| int resp_code = RSP_ERROR; |
| int sendcid; |
| struct at_state_t *at_state; |
| int index; |
| int curact; |
| unsigned long flags; |
| |
| if (ev->cid >= 0) { |
| at_state = at_state_from_cid(cs, ev->cid); |
| if (!at_state) { |
| gigaset_add_event(cs, &cs->at_state, RSP_WRONG_CID, |
| NULL, 0, NULL); |
| return; |
| } |
| } else { |
| at_state = ev->at_state; |
| if (at_state_invalid(cs, at_state)) { |
| gig_dbg(DEBUG_ANY, "event for invalid at_state %p", |
| at_state); |
| return; |
| } |
| } |
| |
| gig_dbg(DEBUG_CMD, "connection state %d, event %d", |
| at_state->ConState, ev->type); |
| |
| bcs = at_state->bcs; |
| sendcid = at_state->cid; |
| |
| /* Setting the pointer to the dial array */ |
| rep = at_state->replystruct; |
| |
| spin_lock_irqsave(&cs->lock, flags); |
| if (ev->type == EV_TIMEOUT) { |
| if (ev->parameter != at_state->timer_index |
| || !at_state->timer_active) { |
| ev->type = RSP_NONE; /* old timeout */ |
| gig_dbg(DEBUG_ANY, "old timeout"); |
| } else if (!at_state->waiting) |
| gig_dbg(DEBUG_ANY, "timeout occurred"); |
| else |
| gig_dbg(DEBUG_ANY, "stopped waiting"); |
| } |
| spin_unlock_irqrestore(&cs->lock, flags); |
| |
| /* if the response belongs to a variable in at_state->int_var[VAR_XXXX] |
| or at_state->str_var[STR_XXXX], set it */ |
| if (ev->type >= RSP_VAR && ev->type < RSP_VAR + VAR_NUM) { |
| index = ev->type - RSP_VAR; |
| at_state->int_var[index] = ev->parameter; |
| } else if (ev->type >= RSP_STR && ev->type < RSP_STR + STR_NUM) { |
| index = ev->type - RSP_STR; |
| kfree(at_state->str_var[index]); |
| at_state->str_var[index] = ev->ptr; |
| ev->ptr = NULL; /* prevent process_events() from |
| deallocating ptr */ |
| } |
| |
| if (ev->type == EV_TIMEOUT || ev->type == RSP_STRING) |
| at_state->getstring = 0; |
| |
| /* Search row in dial array which matches modem response and current |
| constate */ |
| for (;; rep++) { |
| rcode = rep->resp_code; |
| if (rcode == RSP_LAST) { |
| /* found nothing...*/ |
| dev_warn(cs->dev, "%s: rcode=RSP_LAST: " |
| "resp_code %d in ConState %d!\n", |
| __func__, ev->type, at_state->ConState); |
| return; |
| } |
| if ((rcode == RSP_ANY || rcode == ev->type) |
| && ((int) at_state->ConState >= rep->min_ConState) |
| && (rep->max_ConState < 0 |
| || (int) at_state->ConState <= rep->max_ConState) |
| && (rep->parameter < 0 || rep->parameter == ev->parameter)) |
| break; |
| } |
| |
| p_command = rep->command; |
| |
| at_state->waiting = 0; |
| for (curact = 0; curact < MAXACT; ++curact) { |
| /* The row tells us what we should do .. |
| */ |
| do_action(rep->action[curact], cs, bcs, &at_state, &p_command, &genresp, &resp_code, ev); |
| if (!at_state) |
| break; /* may be freed after disconnect */ |
| } |
| |
| if (at_state) { |
| /* Jump to the next con-state regarding the array */ |
| if (rep->new_ConState >= 0) |
| at_state->ConState = rep->new_ConState; |
| |
| if (genresp) { |
| spin_lock_irqsave(&cs->lock, flags); |
| at_state->timer_expires = 0; //FIXME |
| at_state->timer_active = 0; //FIXME |
| spin_unlock_irqrestore(&cs->lock, flags); |
| gigaset_add_event(cs, at_state, resp_code, NULL, 0, NULL); |
| } else { |
| /* Send command to modem if not NULL... */ |
| if (p_command/*rep->command*/) { |
| if (cs->connected) |
| send_command(cs, p_command, |
| sendcid, cs->dle, |
| GFP_ATOMIC); |
| else |
| gigaset_add_event(cs, at_state, |
| RSP_NODEV, |
| NULL, 0, NULL); |
| } |
| |
| spin_lock_irqsave(&cs->lock, flags); |
| if (!rep->timeout) { |
| at_state->timer_expires = 0; |
| at_state->timer_active = 0; |
| } else if (rep->timeout > 0) { /* new timeout */ |
| at_state->timer_expires = rep->timeout * 10; |
| at_state->timer_active = 1; |
| ++at_state->timer_index; |
| } |
| spin_unlock_irqrestore(&cs->lock, flags); |
| } |
| } |
| } |
| |
| static void schedule_sequence(struct cardstate *cs, |
| struct at_state_t *at_state, int sequence) |
| { |
| cs->cur_at_seq = sequence; |
| gigaset_add_event(cs, at_state, RSP_INIT, NULL, sequence, NULL); |
| } |
| |
| static void process_command_flags(struct cardstate *cs) |
| { |
| struct at_state_t *at_state = NULL; |
| struct bc_state *bcs; |
| int i; |
| int sequence; |
| unsigned long flags; |
| |
| atomic_set(&cs->commands_pending, 0); |
| |
| if (cs->cur_at_seq) { |
| gig_dbg(DEBUG_CMD, "not searching scheduled commands: busy"); |
| return; |
| } |
| |
| gig_dbg(DEBUG_CMD, "searching scheduled commands"); |
| |
| sequence = SEQ_NONE; |
| |
| /* clear pending_commands and hangup channels on shutdown */ |
| if (cs->at_state.pending_commands & PC_SHUTDOWN) { |
| cs->at_state.pending_commands &= ~PC_CIDMODE; |
| for (i = 0; i < cs->channels; ++i) { |
| bcs = cs->bcs + i; |
| at_state = &bcs->at_state; |
| at_state->pending_commands &= |
| ~(PC_DLE1 | PC_ACCEPT | PC_DIAL); |
| if (at_state->cid > 0) |
| at_state->pending_commands |= PC_HUP; |
| if (at_state->pending_commands & PC_CID) { |
| at_state->pending_commands |= PC_NOCID; |
| at_state->pending_commands &= ~PC_CID; |
| } |
| } |
| } |
| |
| /* clear pending_commands and hangup channels on reset */ |
| if (cs->at_state.pending_commands & PC_INIT) { |
| cs->at_state.pending_commands &= ~PC_CIDMODE; |
| for (i = 0; i < cs->channels; ++i) { |
| bcs = cs->bcs + i; |
| at_state = &bcs->at_state; |
| at_state->pending_commands &= |
| ~(PC_DLE1 | PC_ACCEPT | PC_DIAL); |
| if (at_state->cid > 0) |
| at_state->pending_commands |= PC_HUP; |
| if (atomic_read(&cs->mstate) == MS_RECOVER) { |
| if (at_state->pending_commands & PC_CID) { |
| at_state->pending_commands |= PC_NOCID; |
| at_state->pending_commands &= ~PC_CID; |
| } |
| } |
| } |
| } |
| |
| /* only switch back to unimodem mode, if no commands are pending and no channels are up */ |
| spin_lock_irqsave(&cs->lock, flags); |
| if (cs->at_state.pending_commands == PC_UMMODE |
| && !cs->cidmode |
| && list_empty(&cs->temp_at_states) |
| && atomic_read(&cs->mode) == M_CID) { |
| sequence = SEQ_UMMODE; |
| at_state = &cs->at_state; |
| for (i = 0; i < cs->channels; ++i) { |
| bcs = cs->bcs + i; |
| if (bcs->at_state.pending_commands || |
| bcs->at_state.cid > 0) { |
| sequence = SEQ_NONE; |
| break; |
| } |
| } |
| } |
| spin_unlock_irqrestore(&cs->lock, flags); |
| cs->at_state.pending_commands &= ~PC_UMMODE; |
| if (sequence != SEQ_NONE) { |
| schedule_sequence(cs, at_state, sequence); |
| return; |
| } |
| |
| for (i = 0; i < cs->channels; ++i) { |
| bcs = cs->bcs + i; |
| if (bcs->at_state.pending_commands & PC_HUP) { |
| bcs->at_state.pending_commands &= ~PC_HUP; |
| if (bcs->at_state.pending_commands & PC_CID) { |
| /* not yet dialing: PC_NOCID is sufficient */ |
| bcs->at_state.pending_commands |= PC_NOCID; |
| bcs->at_state.pending_commands &= ~PC_CID; |
| } else { |
| schedule_sequence(cs, &bcs->at_state, SEQ_HUP); |
| return; |
| } |
| } |
| if (bcs->at_state.pending_commands & PC_NOCID) { |
| bcs->at_state.pending_commands &= ~PC_NOCID; |
| cs->curchannel = bcs->channel; |
| schedule_sequence(cs, &cs->at_state, SEQ_NOCID); |
| return; |
| } else if (bcs->at_state.pending_commands & PC_DLE0) { |
| bcs->at_state.pending_commands &= ~PC_DLE0; |
| cs->curchannel = bcs->channel; |
| schedule_sequence(cs, &cs->at_state, SEQ_DLE0); |
| return; |
| } |
| } |
| |
| list_for_each_entry(at_state, &cs->temp_at_states, list) |
| if (at_state->pending_commands & PC_HUP) { |
| at_state->pending_commands &= ~PC_HUP; |
| schedule_sequence(cs, at_state, SEQ_HUP); |
| return; |
| } |
| |
| if (cs->at_state.pending_commands & PC_INIT) { |
| cs->at_state.pending_commands &= ~PC_INIT; |
| cs->dle = 0; //FIXME |
| cs->inbuf->inputstate = INS_command; |
| //FIXME reset card state (or -> LOCK0)? |
| schedule_sequence(cs, &cs->at_state, SEQ_INIT); |
| return; |
| } |
| if (cs->at_state.pending_commands & PC_SHUTDOWN) { |
| cs->at_state.pending_commands &= ~PC_SHUTDOWN; |
| schedule_sequence(cs, &cs->at_state, SEQ_SHUTDOWN); |
| return; |
| } |
| if (cs->at_state.pending_commands & PC_CIDMODE) { |
| cs->at_state.pending_commands &= ~PC_CIDMODE; |
| if (atomic_read(&cs->mode) == M_UNIMODEM) { |
| cs->retry_count = 1; |
| schedule_sequence(cs, &cs->at_state, SEQ_CIDMODE); |
| return; |
| } |
| } |
| |
| for (i = 0; i < cs->channels; ++i) { |
| bcs = cs->bcs + i; |
| if (bcs->at_state.pending_commands & PC_DLE1) { |
| bcs->at_state.pending_commands &= ~PC_DLE1; |
| cs->curchannel = bcs->channel; |
| schedule_sequence(cs, &cs->at_state, SEQ_DLE1); |
| return; |
| } |
| if (bcs->at_state.pending_commands & PC_ACCEPT) { |
| bcs->at_state.pending_commands &= ~PC_ACCEPT; |
| schedule_sequence(cs, &bcs->at_state, SEQ_ACCEPT); |
| return; |
| } |
| if (bcs->at_state.pending_commands & PC_DIAL) { |
| bcs->at_state.pending_commands &= ~PC_DIAL; |
| schedule_sequence(cs, &bcs->at_state, SEQ_DIAL); |
| return; |
| } |
| if (bcs->at_state.pending_commands & PC_CID) { |
| switch (atomic_read(&cs->mode)) { |
| case M_UNIMODEM: |
| cs->at_state.pending_commands |= PC_CIDMODE; |
| gig_dbg(DEBUG_CMD, "Scheduling PC_CIDMODE"); |
| atomic_set(&cs->commands_pending, 1); |
| return; |
| #ifdef GIG_MAYINITONDIAL |
| case M_UNKNOWN: |
| schedule_init(cs, MS_INIT); |
| return; |
| #endif |
| } |
| bcs->at_state.pending_commands &= ~PC_CID; |
| cs->curchannel = bcs->channel; |
| #ifdef GIG_RETRYCID |
| cs->retry_count = 2; |
| #else |
| cs->retry_count = 1; |
| #endif |
| schedule_sequence(cs, &cs->at_state, SEQ_CID); |
| return; |
| } |
| } |
| } |
| |
| static void process_events(struct cardstate *cs) |
| { |
| struct event_t *ev; |
| unsigned head, tail; |
| int i; |
| int check_flags = 0; |
| int was_busy; |
| unsigned long flags; |
| |
| spin_lock_irqsave(&cs->ev_lock, flags); |
| head = cs->ev_head; |
| |
| for (i = 0; i < 2 * MAX_EVENTS; ++i) { |
| tail = cs->ev_tail; |
| if (tail == head) { |
| if (!check_flags && !atomic_read(&cs->commands_pending)) |
| break; |
| check_flags = 0; |
| spin_unlock_irqrestore(&cs->ev_lock, flags); |
| process_command_flags(cs); |
| spin_lock_irqsave(&cs->ev_lock, flags); |
| tail = cs->ev_tail; |
| if (tail == head) { |
| if (!atomic_read(&cs->commands_pending)) |
| break; |
| continue; |
| } |
| } |
| |
| ev = cs->events + head; |
| was_busy = cs->cur_at_seq != SEQ_NONE; |
| spin_unlock_irqrestore(&cs->ev_lock, flags); |
| process_event(cs, ev); |
| spin_lock_irqsave(&cs->ev_lock, flags); |
| kfree(ev->ptr); |
| ev->ptr = NULL; |
| if (was_busy && cs->cur_at_seq == SEQ_NONE) |
| check_flags = 1; |
| |
| head = (head + 1) % MAX_EVENTS; |
| cs->ev_head = head; |
| } |
| |
| spin_unlock_irqrestore(&cs->ev_lock, flags); |
| |
| if (i == 2 * MAX_EVENTS) { |
| dev_err(cs->dev, |
| "infinite loop in process_events; aborting.\n"); |
| } |
| } |
| |
| /* tasklet scheduled on any event received from the Gigaset device |
| * parameter: |
| * data ISDN controller state structure |
| */ |
| void gigaset_handle_event(unsigned long data) |
| { |
| struct cardstate *cs = (struct cardstate *) data; |
| |
| /* handle incoming data on control/common channel */ |
| if (atomic_read(&cs->inbuf->head) != atomic_read(&cs->inbuf->tail)) { |
| gig_dbg(DEBUG_INTR, "processing new data"); |
| cs->ops->handle_input(cs->inbuf); |
| } |
| |
| process_events(cs); |
| } |