| /* |
| * Driver for keys on GPIO lines capable of generating interrupts. |
| * |
| * Copyright 2005 Phil Blundell |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/version.h> |
| |
| #include <linux/init.h> |
| #include <linux/fs.h> |
| #include <linux/interrupt.h> |
| #include <linux/irq.h> |
| #include <linux/sched.h> |
| #include <linux/pm.h> |
| #include <linux/sysctl.h> |
| #include <linux/proc_fs.h> |
| #include <linux/delay.h> |
| #include <linux/platform_device.h> |
| #include <linux/input.h> |
| #include <linux/irq.h> |
| |
| #include <asm/arch/pxa-regs.h> |
| #include <asm/arch/hardware.h> |
| |
| #include <asm/hardware/gpio_keys.h> |
| |
| static irqreturn_t gpio_keys_isr(int irq, void *dev_id) |
| { |
| int i; |
| struct platform_device *pdev = dev_id; |
| struct gpio_keys_platform_data *pdata = pdev->dev.platform_data; |
| struct input_dev *input = platform_get_drvdata(pdev); |
| |
| for (i = 0; i < pdata->nbuttons; i++) { |
| int gpio = pdata->buttons[i].gpio; |
| if (irq == IRQ_GPIO(gpio)) { |
| int state = ((GPLR(gpio) & GPIO_bit(gpio)) ? 1 : 0) ^ (pdata->buttons[i].active_low); |
| |
| input_report_key(input, pdata->buttons[i].keycode, state); |
| input_sync(input); |
| } |
| } |
| |
| return IRQ_HANDLED; |
| } |
| |
| static int __devinit gpio_keys_probe(struct platform_device *pdev) |
| { |
| struct gpio_keys_platform_data *pdata = pdev->dev.platform_data; |
| struct input_dev *input; |
| int i, error; |
| |
| input = input_allocate_device(); |
| if (!input) |
| return -ENOMEM; |
| |
| platform_set_drvdata(pdev, input); |
| |
| input->evbit[0] = BIT(EV_KEY); |
| |
| input->name = pdev->name; |
| input->phys = "gpio-keys/input0"; |
| input->cdev.dev = &pdev->dev; |
| input->private = pdata; |
| |
| input->id.bustype = BUS_HOST; |
| input->id.vendor = 0x0001; |
| input->id.product = 0x0001; |
| input->id.version = 0x0100; |
| |
| for (i = 0; i < pdata->nbuttons; i++) { |
| int code = pdata->buttons[i].keycode; |
| int irq = IRQ_GPIO(pdata->buttons[i].gpio); |
| |
| set_irq_type(irq, IRQ_TYPE_EDGE_BOTH); |
| error = request_irq(irq, gpio_keys_isr, IRQF_SAMPLE_RANDOM, |
| pdata->buttons[i].desc ? pdata->buttons[i].desc : "gpio_keys", |
| pdev); |
| if (error) { |
| printk(KERN_ERR "gpio-keys: unable to claim irq %d; error %d\n", irq, ret); |
| goto fail; |
| } |
| set_bit(code, input->keybit); |
| } |
| |
| error = input_register_device(input); |
| if (error) { |
| printk(KERN_ERR "Unable to register gpio-keys input device\n"); |
| goto fail; |
| } |
| |
| return 0; |
| |
| fail: |
| for (i = i - 1; i >= 0; i--) |
| free_irq(IRQ_GPIO(pdata->buttons[i].gpio), pdev); |
| |
| input_free_device(input); |
| |
| return error; |
| } |
| |
| static int __devexit gpio_keys_remove(struct platform_device *pdev) |
| { |
| struct gpio_keys_platform_data *pdata = pdev->dev.platform_data; |
| struct input_dev *input = platform_get_drvdata(pdev); |
| int i; |
| |
| for (i = 0; i < pdata->nbuttons; i++) { |
| int irq = IRQ_GPIO(pdata->buttons[i].gpio); |
| free_irq(irq, pdev); |
| } |
| |
| input_unregister_device(input); |
| |
| return 0; |
| } |
| |
| struct platform_driver gpio_keys_device_driver = { |
| .probe = gpio_keys_probe, |
| .remove = __devexit_p(gpio_keys_remove), |
| .driver = { |
| .name = "gpio-keys", |
| } |
| }; |
| |
| static int __init gpio_keys_init(void) |
| { |
| return platform_driver_register(&gpio_keys_device_driver); |
| } |
| |
| static void __exit gpio_keys_exit(void) |
| { |
| platform_driver_unregister(&gpio_keys_device_driver); |
| } |
| |
| module_init(gpio_keys_init); |
| module_exit(gpio_keys_exit); |
| |
| MODULE_LICENSE("GPL"); |
| MODULE_AUTHOR("Phil Blundell <pb@handhelds.org>"); |
| MODULE_DESCRIPTION("Keyboard driver for CPU GPIOs"); |