arch/arm/kernel/head-nommu.S - LeafOS-Devices/android_kernel_samsung_gta4xl - Gitiles

 /*
  *  linux/arch/arm/kernel/head-nommu.S
  *
  *  Copyright (C) 1994-2002 Russell King
  *  Copyright (C) 2003-2006 Hyok S. Choi
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  *
  *  Common kernel startup code (non-paged MM)
  *
  */
 #include <linux/linkage.h>
 #include <linux/init.h>

 #include <asm/assembler.h>
 #include <asm/ptrace.h>
 #include <asm/asm-offsets.h>
 #include <asm/memory.h>
 #include <asm/cp15.h>
 #include <asm/thread_info.h>
 #include <asm/v7m.h>
 #include <asm/mpu.h>
 #include <asm/page.h>

 /*
  * Kernel startup entry point.
  * ---------------------------
  *
  * This is normally called from the decompressor code.  The requirements
  * are: MMU = off, D-cache = off, I-cache = dont care, r0 = 0,
  * r1 = machine nr.
  *
  * See linux/arch/arm/tools/mach-types for the complete list of machine
  * numbers for r1.
  *
  */

 	__HEAD

 #ifdef CONFIG_CPU_THUMBONLY
 	.thumb
 ENTRY(stext)
 #else
 	.arm
 ENTRY(stext)

  THUMB(	adr	r9, BSYM(1f)	)	@ Kernel is always entered in ARM.
  THUMB(	bx	r9		)	@ If this is a Thumb-2 kernel,
  THUMB(	.thumb			)	@ switch to Thumb now.
  THUMB(1:			)
 #endif

 	setmode	PSR_F_BIT | PSR_I_BIT | SVC_MODE, r9 @ ensure svc mode
 						@ and irqs disabled
 #if defined(CONFIG_CPU_CP15)
 	mrc	p15, 0, r9, c0, c0		@ get processor id
 #elif defined(CONFIG_CPU_V7M)
 	ldr	r9, =BASEADDR_V7M_SCB
 	ldr	r9, [r9, V7M_SCB_CPUID]
 #else
 	ldr	r9, =CONFIG_PROCESSOR_ID
 #endif
 	bl	__lookup_processor_type		@ r5=procinfo r9=cpuid
 	movs	r10, r5				@ invalid processor (r5=0)?
 	beq	__error_p				@ yes, error 'p'

 #ifdef CONFIG_ARM_MPU
 	/* Calculate the size of a region covering just the kernel */
 	ldr	r5, =PHYS_OFFSET		@ Region start: PHYS_OFFSET
 	ldr     r6, =(_end)			@ Cover whole kernel
 	sub	r6, r6, r5			@ Minimum size of region to map
 	clz	r6, r6				@ Region size must be 2^N...
 	rsb	r6, r6, #31			@ ...so round up region size
 	lsl	r6, r6, #MPU_RSR_SZ		@ Put size in right field
 	orr	r6, r6, #(1 << MPU_RSR_EN)	@ Set region enabled bit
 	bl	__setup_mpu
 #endif
 	ldr	r13, =__mmap_switched		@ address to jump to after
 						@ initialising sctlr
 	adr	lr, BSYM(1f)			@ return (PIC) address
  ARM(	add	pc, r10, #PROCINFO_INITFUNC	)
  THUMB(	add	r12, r10, #PROCINFO_INITFUNC	)
  THUMB(	mov	pc, r12				)
  1:	b	__after_proc_init
 ENDPROC(stext)

 #ifdef CONFIG_SMP
 	__CPUINIT
 ENTRY(secondary_startup)
 	/*
 	 * Common entry point for secondary CPUs.
 	 *
 	 * Ensure that we're in SVC mode, and IRQs are disabled.  Lookup
 	 * the processor type - there is no need to check the machine type
 	 * as it has already been validated by the primary processor.
 	 */
 	setmode	PSR_F_BIT | PSR_I_BIT | SVC_MODE, r9
 #ifndef CONFIG_CPU_CP15
 	ldr	r9, =CONFIG_PROCESSOR_ID
 #else
 	mrc	p15, 0, r9, c0, c0		@ get processor id
 #endif
 	bl	__lookup_processor_type		@ r5=procinfo r9=cpuid
 	movs	r10, r5				@ invalid processor?
 	beq	__error_p			@ yes, error 'p'

 	adr	r4, __secondary_data
 	ldmia	r4, {r7, r12}

 #ifdef CONFIG_ARM_MPU
 	/* Use MPU region info supplied by __cpu_up */
 	ldr	r6, [r7]			@ get secondary_data.mpu_szr
 	bl      __setup_mpu			@ Initialize the MPU
 #endif

 	adr	lr, BSYM(__after_proc_init)	@ return address
 	mov	r13, r12			@ __secondary_switched address
  ARM(	add	pc, r10, #PROCINFO_INITFUNC	)
  THUMB(	add	r12, r10, #PROCINFO_INITFUNC	)
  THUMB(	mov	pc, r12				)
 ENDPROC(secondary_startup)

 ENTRY(__secondary_switched)
 	ldr	sp, [r7, #8]			@ set up the stack pointer
 	mov	fp, #0
 	b	secondary_start_kernel
 ENDPROC(__secondary_switched)

 	.type	__secondary_data, %object
 __secondary_data:
 	.long	secondary_data
 	.long	__secondary_switched
 #endif /* CONFIG_SMP */

 /*
  * Set the Control Register and Read the process ID.
  */
 __after_proc_init:
 #ifdef CONFIG_CPU_CP15
 	/*
 	 * CP15 system control register value returned in r0 from
 	 * the CPU init function.
 	 */
 #if defined(CONFIG_ALIGNMENT_TRAP) && __LINUX_ARM_ARCH__ < 6
 	orr	r0, r0, #CR_A
 #else
 	bic	r0, r0, #CR_A
 #endif
 #ifdef CONFIG_CPU_DCACHE_DISABLE
 	bic	r0, r0, #CR_C
 #endif
 #ifdef CONFIG_CPU_BPREDICT_DISABLE
 	bic	r0, r0, #CR_Z
 #endif
 #ifdef CONFIG_CPU_ICACHE_DISABLE
 	bic	r0, r0, #CR_I
 #endif
 #ifdef CONFIG_CPU_HIGH_VECTOR
 	orr	r0, r0, #CR_V
 #else
 	bic	r0, r0, #CR_V
 #endif
 	mcr	p15, 0, r0, c1, c0, 0		@ write control reg
 #endif /* CONFIG_CPU_CP15 */
 	mov	pc, r13
 ENDPROC(__after_proc_init)
 	.ltorg

 #ifdef CONFIG_ARM_MPU


 /* Set which MPU region should be programmed */
 .macro set_region_nr tmp, rgnr
 	mov	\tmp, \rgnr			@ Use static region numbers
 	mcr	p15, 0, \tmp, c6, c2, 0		@ Write RGNR
 .endm

 /* Setup a single MPU region, either D or I side (D-side for unified) */
 .macro setup_region bar, acr, sr, side = MPU_DATA_SIDE
 	mcr	p15, 0, \bar, c6, c1, (0 + \side)	@ I/DRBAR
 	mcr	p15, 0, \acr, c6, c1, (4 + \side)	@ I/DRACR
 	mcr	p15, 0, \sr, c6, c1, (2 + \side)		@ I/DRSR
 .endm

 /*
  * Setup the MPU and initial MPU Regions. We create the following regions:
  * Region 0: Use this for probing the MPU details, so leave disabled.
  * Region 1: Background region - covers the whole of RAM as strongly ordered
  * Region 2: Normal, Shared, cacheable for RAM. From PHYS_OFFSET, size from r6
  * Region 3: Normal, shared, inaccessible from PL0 to protect the vectors page
  *
  * r6: Value to be written to DRSR (and IRSR if required) for MPU_RAM_REGION
 */

 ENTRY(__setup_mpu)

 	/* Probe for v7 PMSA compliance */
 	mrc	p15, 0, r0, c0, c1, 4		@ Read ID_MMFR0
 	and	r0, r0, #(MMFR0_PMSA)		@ PMSA field
 	teq	r0, #(MMFR0_PMSAv7)		@ PMSA v7
 	bne	__error_p			@ Fail: ARM_MPU on NOT v7 PMSA

 	/* Determine whether the D/I-side memory map is unified. We set the
 	 * flags here and continue to use them for the rest of this function */
 	mrc	p15, 0, r0, c0, c0, 4		@ MPUIR
 	ands	r5, r0, #MPUIR_DREGION_SZMASK	@ 0 size d region => No MPU
 	beq	__error_p			@ Fail: ARM_MPU and no MPU
 	tst	r0, #MPUIR_nU			@ MPUIR_nU = 0 for unified

 	/* Setup second region first to free up r6 */
 	set_region_nr r0, #MPU_RAM_REGION
 	isb
 	/* Full access from PL0, PL1, shared for CONFIG_SMP, cacheable */
 	ldr	r0, =PHYS_OFFSET		@ RAM starts at PHYS_OFFSET
 	ldr	r5,=(MPU_AP_PL1RW_PL0RW | MPU_RGN_NORMAL)

 	setup_region r0, r5, r6, MPU_DATA_SIDE	@ PHYS_OFFSET, shared, enabled
 	beq	1f				@ Memory-map not unified
 	setup_region r0, r5, r6, MPU_INSTR_SIDE @ PHYS_OFFSET, shared, enabled
 1:	isb

 	/* First/background region */
 	set_region_nr r0, #MPU_BG_REGION
 	isb
 	/* Execute Never,  strongly ordered, inaccessible to PL0, rw PL1  */
 	mov	r0, #0				@ BG region starts at 0x0
 	ldr	r5,=(MPU_ACR_XN | MPU_RGN_STRONGLY_ORDERED | MPU_AP_PL1RW_PL0NA)
 	mov	r6, #MPU_RSR_ALL_MEM		@ 4GB region, enabled

 	setup_region r0, r5, r6, MPU_DATA_SIDE	@ 0x0, BG region, enabled
 	beq	2f				@ Memory-map not unified
 	setup_region r0, r5, r6, MPU_INSTR_SIDE @ 0x0, BG region, enabled
 2:	isb

 	/* Vectors region */
 	set_region_nr r0, #MPU_VECTORS_REGION
 	isb
 	/* Shared, inaccessible to PL0, rw PL1 */
 	mov	r0, #CONFIG_VECTORS_BASE	@ Cover from VECTORS_BASE
 	ldr	r5,=(MPU_AP_PL1RW_PL0NA | MPU_RGN_NORMAL)
 	/* Writing N to bits 5:1 (RSR_SZ) --> region size 2^N+1 */
 	mov	r6, #(((PAGE_SHIFT - 1) << MPU_RSR_SZ) | 1 << MPU_RSR_EN)

 	setup_region r0, r5, r6, MPU_DATA_SIDE	@ VECTORS_BASE, PL0 NA, enabled
 	beq	3f				@ Memory-map not unified
 	setup_region r0, r5, r6, MPU_INSTR_SIDE	@ VECTORS_BASE, PL0 NA, enabled
 3:	isb

 	/* Enable the MPU */
 	mrc	p15, 0, r0, c1, c0, 0		@ Read SCTLR
 	bic     r0, r0, #CR_BR			@ Disable the 'default mem-map'
 	orr	r0, r0, #CR_M			@ Set SCTRL.M (MPU on)
 	mcr	p15, 0, r0, c1, c0, 0		@ Enable MPU
 	isb
 	mov pc,lr
 ENDPROC(__setup_mpu)
 #endif
 #include "head-common.S"
	/*
	* linux/arch/arm/kernel/head-nommu.S
	*
	* Copyright (C) 1994-2002 Russell King
	* Copyright (C) 2003-2006 Hyok S. Choi
	*
	* This program is free software; you can redistribute it and/or modify
	* it under the terms of the GNU General Public License version 2 as
	* published by the Free Software Foundation.
	*
	* Common kernel startup code (non-paged MM)
	*
	*/
	#include <linux/linkage.h>
	#include <linux/init.h>

	#include <asm/assembler.h>
	#include <asm/ptrace.h>
	#include <asm/asm-offsets.h>
	#include <asm/memory.h>
	#include <asm/cp15.h>
	#include <asm/thread_info.h>
	#include <asm/v7m.h>
	#include <asm/mpu.h>
	#include <asm/page.h>

	/*
	* Kernel startup entry point.
	* ---------------------------
	*
	* This is normally called from the decompressor code. The requirements
	* are: MMU = off, D-cache = off, I-cache = dont care, r0 = 0,
	* r1 = machine nr.
	*
	* See linux/arch/arm/tools/mach-types for the complete list of machine
	* numbers for r1.
	*
	*/

	__HEAD

	#ifdef CONFIG_CPU_THUMBONLY
	.thumb
	ENTRY(stext)
	#else
	.arm
	ENTRY(stext)

	THUMB( adr r9, BSYM(1f) ) @ Kernel is always entered in ARM.
	THUMB( bx r9 ) @ If this is a Thumb-2 kernel,
	THUMB( .thumb ) @ switch to Thumb now.
	THUMB(1: )
	#endif

	setmode PSR_F_BIT \| PSR_I_BIT \| SVC_MODE, r9 @ ensure svc mode
	@ and irqs disabled
	#if defined(CONFIG_CPU_CP15)
	mrc p15, 0, r9, c0, c0 @ get processor id
	#elif defined(CONFIG_CPU_V7M)
	ldr r9, =BASEADDR_V7M_SCB
	ldr r9, [r9, V7M_SCB_CPUID]
	#else
	ldr r9, =CONFIG_PROCESSOR_ID
	#endif
	bl __lookup_processor_type @ r5=procinfo r9=cpuid
	movs r10, r5 @ invalid processor (r5=0)?
	beq __error_p @ yes, error 'p'

	#ifdef CONFIG_ARM_MPU
	/* Calculate the size of a region covering just the kernel */
	ldr r5, =PHYS_OFFSET @ Region start: PHYS_OFFSET
	ldr r6, =(_end) @ Cover whole kernel
	sub r6, r6, r5 @ Minimum size of region to map
	clz r6, r6 @ Region size must be 2^N...
	rsb r6, r6, #31 @ ...so round up region size
	lsl r6, r6, #MPU_RSR_SZ @ Put size in right field
	orr r6, r6, #(1 << MPU_RSR_EN) @ Set region enabled bit
	bl __setup_mpu
	#endif
	ldr r13, =__mmap_switched @ address to jump to after
	@ initialising sctlr
	adr lr, BSYM(1f) @ return (PIC) address
	ARM( add pc, r10, #PROCINFO_INITFUNC )
	THUMB( add r12, r10, #PROCINFO_INITFUNC )
	THUMB( mov pc, r12 )
	1: b __after_proc_init
	ENDPROC(stext)

	#ifdef CONFIG_SMP
	__CPUINIT
	ENTRY(secondary_startup)
	/*
	* Common entry point for secondary CPUs.
	*
	* Ensure that we're in SVC mode, and IRQs are disabled. Lookup
	* the processor type - there is no need to check the machine type
	* as it has already been validated by the primary processor.
	*/
	setmode PSR_F_BIT \| PSR_I_BIT \| SVC_MODE, r9
	#ifndef CONFIG_CPU_CP15
	ldr r9, =CONFIG_PROCESSOR_ID
	#else
	mrc p15, 0, r9, c0, c0 @ get processor id
	#endif
	bl __lookup_processor_type @ r5=procinfo r9=cpuid
	movs r10, r5 @ invalid processor?
	beq __error_p @ yes, error 'p'

	adr r4, __secondary_data
	ldmia r4, {r7, r12}

	#ifdef CONFIG_ARM_MPU
	/* Use MPU region info supplied by __cpu_up */
	ldr r6, [r7] @ get secondary_data.mpu_szr
	bl __setup_mpu @ Initialize the MPU
	#endif

	adr lr, BSYM(__after_proc_init) @ return address
	mov r13, r12 @ __secondary_switched address
	ARM( add pc, r10, #PROCINFO_INITFUNC )
	THUMB( add r12, r10, #PROCINFO_INITFUNC )
	THUMB( mov pc, r12 )
	ENDPROC(secondary_startup)

	ENTRY(__secondary_switched)
	ldr sp, [r7, #8] @ set up the stack pointer
	mov fp, #0
	b secondary_start_kernel
	ENDPROC(__secondary_switched)

	.type __secondary_data, %object
	__secondary_data:
	.long secondary_data
	.long __secondary_switched
	#endif /* CONFIG_SMP */

	/*
	* Set the Control Register and Read the process ID.
	*/
	__after_proc_init:
	#ifdef CONFIG_CPU_CP15
	/*
	* CP15 system control register value returned in r0 from
	* the CPU init function.
	*/
	#if defined(CONFIG_ALIGNMENT_TRAP) && __LINUX_ARM_ARCH__ < 6
	orr r0, r0, #CR_A
	#else
	bic r0, r0, #CR_A
	#endif
	#ifdef CONFIG_CPU_DCACHE_DISABLE
	bic r0, r0, #CR_C
	#endif
	#ifdef CONFIG_CPU_BPREDICT_DISABLE
	bic r0, r0, #CR_Z
	#endif
	#ifdef CONFIG_CPU_ICACHE_DISABLE
	bic r0, r0, #CR_I
	#endif
	#ifdef CONFIG_CPU_HIGH_VECTOR
	orr r0, r0, #CR_V
	#else
	bic r0, r0, #CR_V
	#endif
	mcr p15, 0, r0, c1, c0, 0 @ write control reg
	#endif /* CONFIG_CPU_CP15 */
	mov pc, r13
	ENDPROC(__after_proc_init)
	.ltorg

	#ifdef CONFIG_ARM_MPU


	/* Set which MPU region should be programmed */
	.macro set_region_nr tmp, rgnr
	mov \tmp, \rgnr @ Use static region numbers
	mcr p15, 0, \tmp, c6, c2, 0 @ Write RGNR
	.endm

	/* Setup a single MPU region, either D or I side (D-side for unified) */
	.macro setup_region bar, acr, sr, side = MPU_DATA_SIDE
	mcr p15, 0, \bar, c6, c1, (0 + \side) @ I/DRBAR
	mcr p15, 0, \acr, c6, c1, (4 + \side) @ I/DRACR
	mcr p15, 0, \sr, c6, c1, (2 + \side) @ I/DRSR
	.endm

	/*
	* Setup the MPU and initial MPU Regions. We create the following regions:
	* Region 0: Use this for probing the MPU details, so leave disabled.
	* Region 1: Background region - covers the whole of RAM as strongly ordered
	* Region 2: Normal, Shared, cacheable for RAM. From PHYS_OFFSET, size from r6
	* Region 3: Normal, shared, inaccessible from PL0 to protect the vectors page
	*
	* r6: Value to be written to DRSR (and IRSR if required) for MPU_RAM_REGION
	*/

	ENTRY(__setup_mpu)

	/* Probe for v7 PMSA compliance */
	mrc p15, 0, r0, c0, c1, 4 @ Read ID_MMFR0
	and r0, r0, #(MMFR0_PMSA) @ PMSA field
	teq r0, #(MMFR0_PMSAv7) @ PMSA v7
	bne __error_p @ Fail: ARM_MPU on NOT v7 PMSA

	/* Determine whether the D/I-side memory map is unified. We set the
	* flags here and continue to use them for the rest of this function */
	mrc p15, 0, r0, c0, c0, 4 @ MPUIR
	ands r5, r0, #MPUIR_DREGION_SZMASK @ 0 size d region => No MPU
	beq __error_p @ Fail: ARM_MPU and no MPU
	tst r0, #MPUIR_nU @ MPUIR_nU = 0 for unified

	/* Setup second region first to free up r6 */
	set_region_nr r0, #MPU_RAM_REGION
	isb
	/* Full access from PL0, PL1, shared for CONFIG_SMP, cacheable */
	ldr r0, =PHYS_OFFSET @ RAM starts at PHYS_OFFSET
	ldr r5,=(MPU_AP_PL1RW_PL0RW \| MPU_RGN_NORMAL)

	setup_region r0, r5, r6, MPU_DATA_SIDE @ PHYS_OFFSET, shared, enabled
	beq 1f @ Memory-map not unified
	setup_region r0, r5, r6, MPU_INSTR_SIDE @ PHYS_OFFSET, shared, enabled
	1: isb

	/* First/background region */
	set_region_nr r0, #MPU_BG_REGION
	isb
	/* Execute Never, strongly ordered, inaccessible to PL0, rw PL1 */
	mov r0, #0 @ BG region starts at 0x0
	ldr r5,=(MPU_ACR_XN \| MPU_RGN_STRONGLY_ORDERED \| MPU_AP_PL1RW_PL0NA)
	mov r6, #MPU_RSR_ALL_MEM @ 4GB region, enabled

	setup_region r0, r5, r6, MPU_DATA_SIDE @ 0x0, BG region, enabled
	beq 2f @ Memory-map not unified
	setup_region r0, r5, r6, MPU_INSTR_SIDE @ 0x0, BG region, enabled
	2: isb

	/* Vectors region */
	set_region_nr r0, #MPU_VECTORS_REGION
	isb
	/* Shared, inaccessible to PL0, rw PL1 */
	mov r0, #CONFIG_VECTORS_BASE @ Cover from VECTORS_BASE
	ldr r5,=(MPU_AP_PL1RW_PL0NA \| MPU_RGN_NORMAL)
	/* Writing N to bits 5:1 (RSR_SZ) --> region size 2^N+1 */
	mov r6, #(((PAGE_SHIFT - 1) << MPU_RSR_SZ) \| 1 << MPU_RSR_EN)

	setup_region r0, r5, r6, MPU_DATA_SIDE @ VECTORS_BASE, PL0 NA, enabled
	beq 3f @ Memory-map not unified
	setup_region r0, r5, r6, MPU_INSTR_SIDE @ VECTORS_BASE, PL0 NA, enabled
	3: isb

	/* Enable the MPU */
	mrc p15, 0, r0, c1, c0, 0 @ Read SCTLR
	bic r0, r0, #CR_BR @ Disable the 'default mem-map'
	orr r0, r0, #CR_M @ Set SCTRL.M (MPU on)
	mcr p15, 0, r0, c1, c0, 0 @ Enable MPU
	isb
	mov pc,lr
	ENDPROC(__setup_mpu)
	#endif
	#include "head-common.S"