| /* |
| * NEC NL8048HL11 Panel driver |
| * |
| * Copyright (C) 2010 Texas Instruments Inc. |
| * Author: Erik Gilling <konkers@android.com> |
| * Converted to new DSS device model: Tomi Valkeinen <tomi.valkeinen@ti.com> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/delay.h> |
| #include <linux/spi/spi.h> |
| #include <linux/gpio/consumer.h> |
| #include <linux/of_gpio.h> |
| |
| #include "../dss/omapdss.h" |
| |
| struct panel_drv_data { |
| struct omap_dss_device dssdev; |
| struct omap_dss_device *in; |
| |
| struct videomode vm; |
| |
| int data_lines; |
| |
| int res_gpio; |
| int qvga_gpio; |
| |
| struct spi_device *spi; |
| }; |
| |
| #define LCD_XRES 800 |
| #define LCD_YRES 480 |
| /* |
| * NEC PIX Clock Ratings |
| * MIN:21.8MHz TYP:23.8MHz MAX:25.7MHz |
| */ |
| #define LCD_PIXEL_CLOCK 23800000 |
| |
| static const struct { |
| unsigned char addr; |
| unsigned char dat; |
| } nec_8048_init_seq[] = { |
| { 3, 0x01 }, { 0, 0x00 }, { 1, 0x01 }, { 4, 0x00 }, { 5, 0x14 }, |
| { 6, 0x24 }, { 16, 0xD7 }, { 17, 0x00 }, { 18, 0x00 }, { 19, 0x55 }, |
| { 20, 0x01 }, { 21, 0x70 }, { 22, 0x1E }, { 23, 0x25 }, { 24, 0x25 }, |
| { 25, 0x02 }, { 26, 0x02 }, { 27, 0xA0 }, { 32, 0x2F }, { 33, 0x0F }, |
| { 34, 0x0F }, { 35, 0x0F }, { 36, 0x0F }, { 37, 0x0F }, { 38, 0x0F }, |
| { 39, 0x00 }, { 40, 0x02 }, { 41, 0x02 }, { 42, 0x02 }, { 43, 0x0F }, |
| { 44, 0x0F }, { 45, 0x0F }, { 46, 0x0F }, { 47, 0x0F }, { 48, 0x0F }, |
| { 49, 0x0F }, { 50, 0x00 }, { 51, 0x02 }, { 52, 0x02 }, { 53, 0x02 }, |
| { 80, 0x0C }, { 83, 0x42 }, { 84, 0x42 }, { 85, 0x41 }, { 86, 0x14 }, |
| { 89, 0x88 }, { 90, 0x01 }, { 91, 0x00 }, { 92, 0x02 }, { 93, 0x0C }, |
| { 94, 0x1C }, { 95, 0x27 }, { 98, 0x49 }, { 99, 0x27 }, { 102, 0x76 }, |
| { 103, 0x27 }, { 112, 0x01 }, { 113, 0x0E }, { 114, 0x02 }, |
| { 115, 0x0C }, { 118, 0x0C }, { 121, 0x30 }, { 130, 0x00 }, |
| { 131, 0x00 }, { 132, 0xFC }, { 134, 0x00 }, { 136, 0x00 }, |
| { 138, 0x00 }, { 139, 0x00 }, { 140, 0x00 }, { 141, 0xFC }, |
| { 143, 0x00 }, { 145, 0x00 }, { 147, 0x00 }, { 148, 0x00 }, |
| { 149, 0x00 }, { 150, 0xFC }, { 152, 0x00 }, { 154, 0x00 }, |
| { 156, 0x00 }, { 157, 0x00 }, { 2, 0x00 }, |
| }; |
| |
| static const struct videomode nec_8048_panel_vm = { |
| .hactive = LCD_XRES, |
| .vactive = LCD_YRES, |
| .pixelclock = LCD_PIXEL_CLOCK, |
| .hfront_porch = 6, |
| .hsync_len = 1, |
| .hback_porch = 4, |
| .vfront_porch = 3, |
| .vsync_len = 1, |
| .vback_porch = 4, |
| |
| .flags = DISPLAY_FLAGS_HSYNC_LOW | DISPLAY_FLAGS_VSYNC_LOW | |
| DISPLAY_FLAGS_DE_HIGH | DISPLAY_FLAGS_SYNC_POSEDGE | |
| DISPLAY_FLAGS_PIXDATA_POSEDGE, |
| }; |
| |
| #define to_panel_data(p) container_of(p, struct panel_drv_data, dssdev) |
| |
| static int nec_8048_spi_send(struct spi_device *spi, unsigned char reg_addr, |
| unsigned char reg_data) |
| { |
| int ret = 0; |
| unsigned int cmd = 0, data = 0; |
| |
| cmd = 0x0000 | reg_addr; /* register address write */ |
| data = 0x0100 | reg_data; /* register data write */ |
| data = (cmd << 16) | data; |
| |
| ret = spi_write(spi, (unsigned char *)&data, 4); |
| if (ret) |
| pr_err("error in spi_write %x\n", data); |
| |
| return ret; |
| } |
| |
| static int init_nec_8048_wvga_lcd(struct spi_device *spi) |
| { |
| unsigned int i; |
| /* Initialization Sequence */ |
| /* nec_8048_spi_send(spi, REG, VAL) */ |
| for (i = 0; i < (ARRAY_SIZE(nec_8048_init_seq) - 1); i++) |
| nec_8048_spi_send(spi, nec_8048_init_seq[i].addr, |
| nec_8048_init_seq[i].dat); |
| udelay(20); |
| nec_8048_spi_send(spi, nec_8048_init_seq[i].addr, |
| nec_8048_init_seq[i].dat); |
| return 0; |
| } |
| |
| static int nec_8048_connect(struct omap_dss_device *dssdev) |
| { |
| struct panel_drv_data *ddata = to_panel_data(dssdev); |
| struct omap_dss_device *in = ddata->in; |
| int r; |
| |
| if (omapdss_device_is_connected(dssdev)) |
| return 0; |
| |
| r = in->ops.dpi->connect(in, dssdev); |
| if (r) |
| return r; |
| |
| return 0; |
| } |
| |
| static void nec_8048_disconnect(struct omap_dss_device *dssdev) |
| { |
| struct panel_drv_data *ddata = to_panel_data(dssdev); |
| struct omap_dss_device *in = ddata->in; |
| |
| if (!omapdss_device_is_connected(dssdev)) |
| return; |
| |
| in->ops.dpi->disconnect(in, dssdev); |
| } |
| |
| static int nec_8048_enable(struct omap_dss_device *dssdev) |
| { |
| struct panel_drv_data *ddata = to_panel_data(dssdev); |
| struct omap_dss_device *in = ddata->in; |
| int r; |
| |
| if (!omapdss_device_is_connected(dssdev)) |
| return -ENODEV; |
| |
| if (omapdss_device_is_enabled(dssdev)) |
| return 0; |
| |
| if (ddata->data_lines) |
| in->ops.dpi->set_data_lines(in, ddata->data_lines); |
| in->ops.dpi->set_timings(in, &ddata->vm); |
| |
| r = in->ops.dpi->enable(in); |
| if (r) |
| return r; |
| |
| if (gpio_is_valid(ddata->res_gpio)) |
| gpio_set_value_cansleep(ddata->res_gpio, 1); |
| |
| dssdev->state = OMAP_DSS_DISPLAY_ACTIVE; |
| |
| return 0; |
| } |
| |
| static void nec_8048_disable(struct omap_dss_device *dssdev) |
| { |
| struct panel_drv_data *ddata = to_panel_data(dssdev); |
| struct omap_dss_device *in = ddata->in; |
| |
| if (!omapdss_device_is_enabled(dssdev)) |
| return; |
| |
| if (gpio_is_valid(ddata->res_gpio)) |
| gpio_set_value_cansleep(ddata->res_gpio, 0); |
| |
| in->ops.dpi->disable(in); |
| |
| dssdev->state = OMAP_DSS_DISPLAY_DISABLED; |
| } |
| |
| static void nec_8048_set_timings(struct omap_dss_device *dssdev, |
| struct videomode *vm) |
| { |
| struct panel_drv_data *ddata = to_panel_data(dssdev); |
| struct omap_dss_device *in = ddata->in; |
| |
| ddata->vm = *vm; |
| dssdev->panel.vm = *vm; |
| |
| in->ops.dpi->set_timings(in, vm); |
| } |
| |
| static void nec_8048_get_timings(struct omap_dss_device *dssdev, |
| struct videomode *vm) |
| { |
| struct panel_drv_data *ddata = to_panel_data(dssdev); |
| |
| *vm = ddata->vm; |
| } |
| |
| static int nec_8048_check_timings(struct omap_dss_device *dssdev, |
| struct videomode *vm) |
| { |
| struct panel_drv_data *ddata = to_panel_data(dssdev); |
| struct omap_dss_device *in = ddata->in; |
| |
| return in->ops.dpi->check_timings(in, vm); |
| } |
| |
| static struct omap_dss_driver nec_8048_ops = { |
| .connect = nec_8048_connect, |
| .disconnect = nec_8048_disconnect, |
| |
| .enable = nec_8048_enable, |
| .disable = nec_8048_disable, |
| |
| .set_timings = nec_8048_set_timings, |
| .get_timings = nec_8048_get_timings, |
| .check_timings = nec_8048_check_timings, |
| |
| .get_resolution = omapdss_default_get_resolution, |
| }; |
| |
| static int nec_8048_probe_of(struct spi_device *spi) |
| { |
| struct device_node *node = spi->dev.of_node; |
| struct panel_drv_data *ddata = dev_get_drvdata(&spi->dev); |
| struct omap_dss_device *in; |
| int gpio; |
| |
| gpio = of_get_named_gpio(node, "reset-gpios", 0); |
| if (!gpio_is_valid(gpio)) { |
| dev_err(&spi->dev, "failed to parse enable gpio\n"); |
| return gpio; |
| } |
| ddata->res_gpio = gpio; |
| |
| /* XXX the panel spec doesn't mention any QVGA pin?? */ |
| ddata->qvga_gpio = -ENOENT; |
| |
| in = omapdss_of_find_source_for_first_ep(node); |
| if (IS_ERR(in)) { |
| dev_err(&spi->dev, "failed to find video source\n"); |
| return PTR_ERR(in); |
| } |
| |
| ddata->in = in; |
| |
| return 0; |
| } |
| |
| static int nec_8048_probe(struct spi_device *spi) |
| { |
| struct panel_drv_data *ddata; |
| struct omap_dss_device *dssdev; |
| int r; |
| |
| dev_dbg(&spi->dev, "%s\n", __func__); |
| |
| spi->mode = SPI_MODE_0; |
| spi->bits_per_word = 32; |
| |
| r = spi_setup(spi); |
| if (r < 0) { |
| dev_err(&spi->dev, "spi_setup failed: %d\n", r); |
| return r; |
| } |
| |
| init_nec_8048_wvga_lcd(spi); |
| |
| ddata = devm_kzalloc(&spi->dev, sizeof(*ddata), GFP_KERNEL); |
| if (ddata == NULL) |
| return -ENOMEM; |
| |
| dev_set_drvdata(&spi->dev, ddata); |
| |
| ddata->spi = spi; |
| |
| if (!spi->dev.of_node) |
| return -ENODEV; |
| |
| r = nec_8048_probe_of(spi); |
| if (r) |
| return r; |
| |
| if (gpio_is_valid(ddata->qvga_gpio)) { |
| r = devm_gpio_request_one(&spi->dev, ddata->qvga_gpio, |
| GPIOF_OUT_INIT_HIGH, "lcd QVGA"); |
| if (r) |
| goto err_gpio; |
| } |
| |
| if (gpio_is_valid(ddata->res_gpio)) { |
| r = devm_gpio_request_one(&spi->dev, ddata->res_gpio, |
| GPIOF_OUT_INIT_LOW, "lcd RES"); |
| if (r) |
| goto err_gpio; |
| } |
| |
| ddata->vm = nec_8048_panel_vm; |
| |
| dssdev = &ddata->dssdev; |
| dssdev->dev = &spi->dev; |
| dssdev->driver = &nec_8048_ops; |
| dssdev->type = OMAP_DISPLAY_TYPE_DPI; |
| dssdev->owner = THIS_MODULE; |
| dssdev->panel.vm = ddata->vm; |
| |
| r = omapdss_register_display(dssdev); |
| if (r) { |
| dev_err(&spi->dev, "Failed to register panel\n"); |
| goto err_reg; |
| } |
| |
| return 0; |
| |
| err_reg: |
| err_gpio: |
| omap_dss_put_device(ddata->in); |
| return r; |
| } |
| |
| static int nec_8048_remove(struct spi_device *spi) |
| { |
| struct panel_drv_data *ddata = dev_get_drvdata(&spi->dev); |
| struct omap_dss_device *dssdev = &ddata->dssdev; |
| struct omap_dss_device *in = ddata->in; |
| |
| dev_dbg(&ddata->spi->dev, "%s\n", __func__); |
| |
| omapdss_unregister_display(dssdev); |
| |
| nec_8048_disable(dssdev); |
| nec_8048_disconnect(dssdev); |
| |
| omap_dss_put_device(in); |
| |
| return 0; |
| } |
| |
| #ifdef CONFIG_PM_SLEEP |
| static int nec_8048_suspend(struct device *dev) |
| { |
| struct spi_device *spi = to_spi_device(dev); |
| |
| nec_8048_spi_send(spi, 2, 0x01); |
| mdelay(40); |
| |
| return 0; |
| } |
| |
| static int nec_8048_resume(struct device *dev) |
| { |
| struct spi_device *spi = to_spi_device(dev); |
| |
| /* reinitialize the panel */ |
| spi_setup(spi); |
| nec_8048_spi_send(spi, 2, 0x00); |
| init_nec_8048_wvga_lcd(spi); |
| |
| return 0; |
| } |
| static SIMPLE_DEV_PM_OPS(nec_8048_pm_ops, nec_8048_suspend, |
| nec_8048_resume); |
| #define NEC_8048_PM_OPS (&nec_8048_pm_ops) |
| #else |
| #define NEC_8048_PM_OPS NULL |
| #endif |
| |
| static const struct of_device_id nec_8048_of_match[] = { |
| { .compatible = "omapdss,nec,nl8048hl11", }, |
| {}, |
| }; |
| |
| MODULE_DEVICE_TABLE(of, nec_8048_of_match); |
| |
| static struct spi_driver nec_8048_driver = { |
| .driver = { |
| .name = "panel-nec-nl8048hl11", |
| .pm = NEC_8048_PM_OPS, |
| .of_match_table = nec_8048_of_match, |
| .suppress_bind_attrs = true, |
| }, |
| .probe = nec_8048_probe, |
| .remove = nec_8048_remove, |
| }; |
| |
| module_spi_driver(nec_8048_driver); |
| |
| MODULE_ALIAS("spi:nec,nl8048hl11"); |
| MODULE_AUTHOR("Erik Gilling <konkers@android.com>"); |
| MODULE_DESCRIPTION("NEC-NL8048HL11 Driver"); |
| MODULE_LICENSE("GPL"); |