| /* |
| * linux/arch/x86_64/kernel/head.S -- start in 32bit and switch to 64bit |
| * |
| * Copyright (C) 2000 Andrea Arcangeli <andrea@suse.de> SuSE |
| * Copyright (C) 2000 Pavel Machek <pavel@suse.cz> |
| * Copyright (C) 2000 Karsten Keil <kkeil@suse.de> |
| * Copyright (C) 2001,2002 Andi Kleen <ak@suse.de> |
| * Copyright (C) 2005 Eric Biederman <ebiederm@xmission.com> |
| */ |
| |
| |
| #include <linux/linkage.h> |
| #include <linux/threads.h> |
| #include <linux/init.h> |
| #include <asm/desc.h> |
| #include <asm/segment.h> |
| #include <asm/pgtable.h> |
| #include <asm/page.h> |
| #include <asm/msr.h> |
| #include <asm/cache.h> |
| |
| #ifdef CONFIG_PARAVIRT |
| #include <asm/asm-offsets.h> |
| #include <asm/paravirt.h> |
| #else |
| #define GET_CR2_INTO_RCX movq %cr2, %rcx |
| #endif |
| |
| /* we are not able to switch in one step to the final KERNEL ADRESS SPACE |
| * because we need identity-mapped pages. |
| * |
| */ |
| |
| .text |
| .section .text.head |
| .code64 |
| .globl startup_64 |
| startup_64: |
| |
| /* |
| * At this point the CPU runs in 64bit mode CS.L = 1 CS.D = 1, |
| * and someone has loaded an identity mapped page table |
| * for us. These identity mapped page tables map all of the |
| * kernel pages and possibly all of memory. |
| * |
| * %esi holds a physical pointer to real_mode_data. |
| * |
| * We come here either directly from a 64bit bootloader, or from |
| * arch/x86_64/boot/compressed/head.S. |
| * |
| * We only come here initially at boot nothing else comes here. |
| * |
| * Since we may be loaded at an address different from what we were |
| * compiled to run at we first fixup the physical addresses in our page |
| * tables and then reload them. |
| */ |
| |
| /* Compute the delta between the address I am compiled to run at and the |
| * address I am actually running at. |
| */ |
| leaq _text(%rip), %rbp |
| subq $_text - __START_KERNEL_map, %rbp |
| |
| /* Is the address not 2M aligned? */ |
| movq %rbp, %rax |
| andl $~LARGE_PAGE_MASK, %eax |
| testl %eax, %eax |
| jnz bad_address |
| |
| /* Is the address too large? */ |
| leaq _text(%rip), %rdx |
| movq $PGDIR_SIZE, %rax |
| cmpq %rax, %rdx |
| jae bad_address |
| |
| /* Fixup the physical addresses in the page table |
| */ |
| addq %rbp, init_level4_pgt + 0(%rip) |
| addq %rbp, init_level4_pgt + (258*8)(%rip) |
| addq %rbp, init_level4_pgt + (511*8)(%rip) |
| |
| addq %rbp, level3_ident_pgt + 0(%rip) |
| |
| addq %rbp, level3_kernel_pgt + (510*8)(%rip) |
| addq %rbp, level3_kernel_pgt + (511*8)(%rip) |
| |
| addq %rbp, level2_fixmap_pgt + (506*8)(%rip) |
| |
| /* Add an Identity mapping if I am above 1G */ |
| leaq _text(%rip), %rdi |
| andq $LARGE_PAGE_MASK, %rdi |
| |
| movq %rdi, %rax |
| shrq $PUD_SHIFT, %rax |
| andq $(PTRS_PER_PUD - 1), %rax |
| jz ident_complete |
| |
| leaq (level2_spare_pgt - __START_KERNEL_map + _KERNPG_TABLE)(%rbp), %rdx |
| leaq level3_ident_pgt(%rip), %rbx |
| movq %rdx, 0(%rbx, %rax, 8) |
| |
| movq %rdi, %rax |
| shrq $PMD_SHIFT, %rax |
| andq $(PTRS_PER_PMD - 1), %rax |
| leaq __PAGE_KERNEL_LARGE_EXEC(%rdi), %rdx |
| leaq level2_spare_pgt(%rip), %rbx |
| movq %rdx, 0(%rbx, %rax, 8) |
| ident_complete: |
| |
| /* Fixup the kernel text+data virtual addresses |
| */ |
| leaq level2_kernel_pgt(%rip), %rdi |
| leaq 4096(%rdi), %r8 |
| /* See if it is a valid page table entry */ |
| 1: testq $1, 0(%rdi) |
| jz 2f |
| addq %rbp, 0(%rdi) |
| /* Go to the next page */ |
| 2: addq $8, %rdi |
| cmp %r8, %rdi |
| jne 1b |
| |
| /* Fixup phys_base */ |
| addq %rbp, phys_base(%rip) |
| |
| #ifdef CONFIG_SMP |
| addq %rbp, trampoline_level4_pgt + 0(%rip) |
| addq %rbp, trampoline_level4_pgt + (511*8)(%rip) |
| #endif |
| #ifdef CONFIG_ACPI_SLEEP |
| addq %rbp, wakeup_level4_pgt + 0(%rip) |
| addq %rbp, wakeup_level4_pgt + (511*8)(%rip) |
| #endif |
| |
| /* Due to ENTRY(), sometimes the empty space gets filled with |
| * zeros. Better take a jmp than relying on empty space being |
| * filled with 0x90 (nop) |
| */ |
| jmp secondary_startup_64 |
| ENTRY(secondary_startup_64) |
| /* |
| * At this point the CPU runs in 64bit mode CS.L = 1 CS.D = 1, |
| * and someone has loaded a mapped page table. |
| * |
| * %esi holds a physical pointer to real_mode_data. |
| * |
| * We come here either from startup_64 (using physical addresses) |
| * or from trampoline.S (using virtual addresses). |
| * |
| * Using virtual addresses from trampoline.S removes the need |
| * to have any identity mapped pages in the kernel page table |
| * after the boot processor executes this code. |
| */ |
| |
| /* Enable PAE mode and PGE */ |
| xorq %rax, %rax |
| btsq $5, %rax |
| btsq $7, %rax |
| movq %rax, %cr4 |
| |
| /* Setup early boot stage 4 level pagetables. */ |
| movq $(init_level4_pgt - __START_KERNEL_map), %rax |
| addq phys_base(%rip), %rax |
| movq %rax, %cr3 |
| |
| /* Ensure I am executing from virtual addresses */ |
| movq $1f, %rax |
| jmp *%rax |
| 1: |
| |
| /* Check if nx is implemented */ |
| movl $0x80000001, %eax |
| cpuid |
| movl %edx,%edi |
| |
| /* Setup EFER (Extended Feature Enable Register) */ |
| movl $MSR_EFER, %ecx |
| rdmsr |
| btsl $_EFER_SCE, %eax /* Enable System Call */ |
| btl $20,%edi /* No Execute supported? */ |
| jnc 1f |
| btsl $_EFER_NX, %eax |
| 1: wrmsr /* Make changes effective */ |
| |
| /* Setup cr0 */ |
| #define CR0_PM 1 /* protected mode */ |
| #define CR0_MP (1<<1) |
| #define CR0_ET (1<<4) |
| #define CR0_NE (1<<5) |
| #define CR0_WP (1<<16) |
| #define CR0_AM (1<<18) |
| #define CR0_PAGING (1<<31) |
| movl $CR0_PM|CR0_MP|CR0_ET|CR0_NE|CR0_WP|CR0_AM|CR0_PAGING,%eax |
| /* Make changes effective */ |
| movq %rax, %cr0 |
| |
| /* Setup a boot time stack */ |
| movq init_rsp(%rip),%rsp |
| |
| /* zero EFLAGS after setting rsp */ |
| pushq $0 |
| popfq |
| |
| /* |
| * We must switch to a new descriptor in kernel space for the GDT |
| * because soon the kernel won't have access anymore to the userspace |
| * addresses where we're currently running on. We have to do that here |
| * because in 32bit we couldn't load a 64bit linear address. |
| */ |
| lgdt cpu_gdt_descr(%rip) |
| |
| /* set up data segments. actually 0 would do too */ |
| movl $__KERNEL_DS,%eax |
| movl %eax,%ds |
| movl %eax,%ss |
| movl %eax,%es |
| |
| /* |
| * We don't really need to load %fs or %gs, but load them anyway |
| * to kill any stale realmode selectors. This allows execution |
| * under VT hardware. |
| */ |
| movl %eax,%fs |
| movl %eax,%gs |
| |
| /* |
| * Setup up a dummy PDA. this is just for some early bootup code |
| * that does in_interrupt() |
| */ |
| movl $MSR_GS_BASE,%ecx |
| movq $empty_zero_page,%rax |
| movq %rax,%rdx |
| shrq $32,%rdx |
| wrmsr |
| |
| /* esi is pointer to real mode structure with interesting info. |
| pass it to C */ |
| movl %esi, %edi |
| |
| /* Finally jump to run C code and to be on real kernel address |
| * Since we are running on identity-mapped space we have to jump |
| * to the full 64bit address, this is only possible as indirect |
| * jump. In addition we need to ensure %cs is set so we make this |
| * a far return. |
| */ |
| movq initial_code(%rip),%rax |
| pushq $0 # fake return address to stop unwinder |
| pushq $__KERNEL_CS # set correct cs |
| pushq %rax # target address in negative space |
| lretq |
| |
| /* SMP bootup changes these two */ |
| #ifndef CONFIG_HOTPLUG_CPU |
| .pushsection .init.data |
| #endif |
| .align 8 |
| .globl initial_code |
| initial_code: |
| .quad x86_64_start_kernel |
| #ifndef CONFIG_HOTPLUG_CPU |
| .popsection |
| #endif |
| .globl init_rsp |
| init_rsp: |
| .quad init_thread_union+THREAD_SIZE-8 |
| |
| bad_address: |
| jmp bad_address |
| |
| ENTRY(early_idt_handler) |
| cmpl $2,early_recursion_flag(%rip) |
| jz 1f |
| incl early_recursion_flag(%rip) |
| xorl %eax,%eax |
| movq 8(%rsp),%rsi # get rip |
| movq (%rsp),%rdx |
| GET_CR2_INTO_RCX |
| leaq early_idt_msg(%rip),%rdi |
| call early_printk |
| cmpl $2,early_recursion_flag(%rip) |
| jz 1f |
| call dump_stack |
| #ifdef CONFIG_KALLSYMS |
| leaq early_idt_ripmsg(%rip),%rdi |
| movq 8(%rsp),%rsi # get rip again |
| call __print_symbol |
| #endif |
| 1: hlt |
| jmp 1b |
| early_recursion_flag: |
| .long 0 |
| |
| early_idt_msg: |
| .asciz "PANIC: early exception rip %lx error %lx cr2 %lx\n" |
| early_idt_ripmsg: |
| .asciz "RIP %s\n" |
| |
| .balign PAGE_SIZE |
| |
| #define NEXT_PAGE(name) \ |
| .balign PAGE_SIZE; \ |
| ENTRY(name) |
| |
| /* Automate the creation of 1 to 1 mapping pmd entries */ |
| #define PMDS(START, PERM, COUNT) \ |
| i = 0 ; \ |
| .rept (COUNT) ; \ |
| .quad (START) + (i << 21) + (PERM) ; \ |
| i = i + 1 ; \ |
| .endr |
| |
| /* |
| * This default setting generates an ident mapping at address 0x100000 |
| * and a mapping for the kernel that precisely maps virtual address |
| * 0xffffffff80000000 to physical address 0x000000. (always using |
| * 2Mbyte large pages provided by PAE mode) |
| */ |
| NEXT_PAGE(init_level4_pgt) |
| .quad level3_ident_pgt - __START_KERNEL_map + _KERNPG_TABLE |
| .fill 257,8,0 |
| .quad level3_ident_pgt - __START_KERNEL_map + _KERNPG_TABLE |
| .fill 252,8,0 |
| /* (2^48-(2*1024*1024*1024))/(2^39) = 511 */ |
| .quad level3_kernel_pgt - __START_KERNEL_map + _PAGE_TABLE |
| |
| NEXT_PAGE(level3_ident_pgt) |
| .quad level2_ident_pgt - __START_KERNEL_map + _KERNPG_TABLE |
| .fill 511,8,0 |
| |
| NEXT_PAGE(level3_kernel_pgt) |
| .fill 510,8,0 |
| /* (2^48-(2*1024*1024*1024)-((2^39)*511))/(2^30) = 510 */ |
| .quad level2_kernel_pgt - __START_KERNEL_map + _KERNPG_TABLE |
| .quad level2_fixmap_pgt - __START_KERNEL_map + _PAGE_TABLE |
| |
| NEXT_PAGE(level2_fixmap_pgt) |
| .fill 506,8,0 |
| .quad level1_fixmap_pgt - __START_KERNEL_map + _PAGE_TABLE |
| /* 8MB reserved for vsyscalls + a 2MB hole = 4 + 1 entries */ |
| .fill 5,8,0 |
| |
| NEXT_PAGE(level1_fixmap_pgt) |
| .fill 512,8,0 |
| |
| NEXT_PAGE(level2_ident_pgt) |
| /* Since I easily can, map the first 1G. |
| * Don't set NX because code runs from these pages. |
| */ |
| PMDS(0x0000000000000000, __PAGE_KERNEL_LARGE_EXEC, PTRS_PER_PMD) |
| |
| NEXT_PAGE(level2_kernel_pgt) |
| /* 40MB kernel mapping. The kernel code cannot be bigger than that. |
| When you change this change KERNEL_TEXT_SIZE in page.h too. */ |
| /* (2^48-(2*1024*1024*1024)-((2^39)*511)-((2^30)*510)) = 0 */ |
| PMDS(0x0000000000000000, __PAGE_KERNEL_LARGE_EXEC|_PAGE_GLOBAL, KERNEL_TEXT_SIZE/PMD_SIZE) |
| /* Module mapping starts here */ |
| .fill (PTRS_PER_PMD - (KERNEL_TEXT_SIZE/PMD_SIZE)),8,0 |
| |
| NEXT_PAGE(level2_spare_pgt) |
| .fill 512,8,0 |
| |
| #undef PMDS |
| #undef NEXT_PAGE |
| |
| .data |
| .align 16 |
| .globl cpu_gdt_descr |
| cpu_gdt_descr: |
| .word gdt_end-cpu_gdt_table-1 |
| gdt: |
| .quad cpu_gdt_table |
| #ifdef CONFIG_SMP |
| .rept NR_CPUS-1 |
| .word 0 |
| .quad 0 |
| .endr |
| #endif |
| |
| ENTRY(phys_base) |
| /* This must match the first entry in level2_kernel_pgt */ |
| .quad 0x0000000000000000 |
| |
| /* We need valid kernel segments for data and code in long mode too |
| * IRET will check the segment types kkeil 2000/10/28 |
| * Also sysret mandates a special GDT layout |
| */ |
| |
| .section .data.page_aligned, "aw" |
| .align PAGE_SIZE |
| |
| /* The TLS descriptors are currently at a different place compared to i386. |
| Hopefully nobody expects them at a fixed place (Wine?) */ |
| |
| ENTRY(cpu_gdt_table) |
| .quad 0x0000000000000000 /* NULL descriptor */ |
| .quad 0x00cf9b000000ffff /* __KERNEL32_CS */ |
| .quad 0x00af9b000000ffff /* __KERNEL_CS */ |
| .quad 0x00cf93000000ffff /* __KERNEL_DS */ |
| .quad 0x00cffb000000ffff /* __USER32_CS */ |
| .quad 0x00cff3000000ffff /* __USER_DS, __USER32_DS */ |
| .quad 0x00affb000000ffff /* __USER_CS */ |
| .quad 0x0 /* unused */ |
| .quad 0,0 /* TSS */ |
| .quad 0,0 /* LDT */ |
| .quad 0,0,0 /* three TLS descriptors */ |
| .quad 0x0000f40000000000 /* node/CPU stored in limit */ |
| gdt_end: |
| /* asm/segment.h:GDT_ENTRIES must match this */ |
| /* This should be a multiple of the cache line size */ |
| /* GDTs of other CPUs are now dynamically allocated */ |
| |
| /* zero the remaining page */ |
| .fill PAGE_SIZE / 8 - GDT_ENTRIES,8,0 |
| |
| .section .bss, "aw", @nobits |
| .align L1_CACHE_BYTES |
| ENTRY(idt_table) |
| .skip 256 * 16 |
| |
| .section .bss.page_aligned, "aw", @nobits |
| .align PAGE_SIZE |
| ENTRY(empty_zero_page) |
| .skip PAGE_SIZE |