| /* |
| * Mediatek MT7530 DSA Switch driver |
| * Copyright (C) 2017 Sean Wang <sean.wang@mediatek.com> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| */ |
| #include <linux/etherdevice.h> |
| #include <linux/if_bridge.h> |
| #include <linux/iopoll.h> |
| #include <linux/mdio.h> |
| #include <linux/mfd/syscon.h> |
| #include <linux/module.h> |
| #include <linux/netdevice.h> |
| #include <linux/of_gpio.h> |
| #include <linux/of_mdio.h> |
| #include <linux/of_net.h> |
| #include <linux/of_platform.h> |
| #include <linux/phy.h> |
| #include <linux/regmap.h> |
| #include <linux/regulator/consumer.h> |
| #include <linux/reset.h> |
| #include <linux/gpio/consumer.h> |
| #include <net/dsa.h> |
| #include <net/switchdev.h> |
| |
| #include "mt7530.h" |
| |
| /* String, offset, and register size in bytes if different from 4 bytes */ |
| static const struct mt7530_mib_desc mt7530_mib[] = { |
| MIB_DESC(1, 0x00, "TxDrop"), |
| MIB_DESC(1, 0x04, "TxCrcErr"), |
| MIB_DESC(1, 0x08, "TxUnicast"), |
| MIB_DESC(1, 0x0c, "TxMulticast"), |
| MIB_DESC(1, 0x10, "TxBroadcast"), |
| MIB_DESC(1, 0x14, "TxCollision"), |
| MIB_DESC(1, 0x18, "TxSingleCollision"), |
| MIB_DESC(1, 0x1c, "TxMultipleCollision"), |
| MIB_DESC(1, 0x20, "TxDeferred"), |
| MIB_DESC(1, 0x24, "TxLateCollision"), |
| MIB_DESC(1, 0x28, "TxExcessiveCollistion"), |
| MIB_DESC(1, 0x2c, "TxPause"), |
| MIB_DESC(1, 0x30, "TxPktSz64"), |
| MIB_DESC(1, 0x34, "TxPktSz65To127"), |
| MIB_DESC(1, 0x38, "TxPktSz128To255"), |
| MIB_DESC(1, 0x3c, "TxPktSz256To511"), |
| MIB_DESC(1, 0x40, "TxPktSz512To1023"), |
| MIB_DESC(1, 0x44, "Tx1024ToMax"), |
| MIB_DESC(2, 0x48, "TxBytes"), |
| MIB_DESC(1, 0x60, "RxDrop"), |
| MIB_DESC(1, 0x64, "RxFiltering"), |
| MIB_DESC(1, 0x6c, "RxMulticast"), |
| MIB_DESC(1, 0x70, "RxBroadcast"), |
| MIB_DESC(1, 0x74, "RxAlignErr"), |
| MIB_DESC(1, 0x78, "RxCrcErr"), |
| MIB_DESC(1, 0x7c, "RxUnderSizeErr"), |
| MIB_DESC(1, 0x80, "RxFragErr"), |
| MIB_DESC(1, 0x84, "RxOverSzErr"), |
| MIB_DESC(1, 0x88, "RxJabberErr"), |
| MIB_DESC(1, 0x8c, "RxPause"), |
| MIB_DESC(1, 0x90, "RxPktSz64"), |
| MIB_DESC(1, 0x94, "RxPktSz65To127"), |
| MIB_DESC(1, 0x98, "RxPktSz128To255"), |
| MIB_DESC(1, 0x9c, "RxPktSz256To511"), |
| MIB_DESC(1, 0xa0, "RxPktSz512To1023"), |
| MIB_DESC(1, 0xa4, "RxPktSz1024ToMax"), |
| MIB_DESC(2, 0xa8, "RxBytes"), |
| MIB_DESC(1, 0xb0, "RxCtrlDrop"), |
| MIB_DESC(1, 0xb4, "RxIngressDrop"), |
| MIB_DESC(1, 0xb8, "RxArlDrop"), |
| }; |
| |
| static int |
| mt7623_trgmii_write(struct mt7530_priv *priv, u32 reg, u32 val) |
| { |
| int ret; |
| |
| ret = regmap_write(priv->ethernet, TRGMII_BASE(reg), val); |
| if (ret < 0) |
| dev_err(priv->dev, |
| "failed to priv write register\n"); |
| return ret; |
| } |
| |
| static u32 |
| mt7623_trgmii_read(struct mt7530_priv *priv, u32 reg) |
| { |
| int ret; |
| u32 val; |
| |
| ret = regmap_read(priv->ethernet, TRGMII_BASE(reg), &val); |
| if (ret < 0) { |
| dev_err(priv->dev, |
| "failed to priv read register\n"); |
| return ret; |
| } |
| |
| return val; |
| } |
| |
| static void |
| mt7623_trgmii_rmw(struct mt7530_priv *priv, u32 reg, |
| u32 mask, u32 set) |
| { |
| u32 val; |
| |
| val = mt7623_trgmii_read(priv, reg); |
| val &= ~mask; |
| val |= set; |
| mt7623_trgmii_write(priv, reg, val); |
| } |
| |
| static void |
| mt7623_trgmii_set(struct mt7530_priv *priv, u32 reg, u32 val) |
| { |
| mt7623_trgmii_rmw(priv, reg, 0, val); |
| } |
| |
| static void |
| mt7623_trgmii_clear(struct mt7530_priv *priv, u32 reg, u32 val) |
| { |
| mt7623_trgmii_rmw(priv, reg, val, 0); |
| } |
| |
| static int |
| core_read_mmd_indirect(struct mt7530_priv *priv, int prtad, int devad) |
| { |
| struct mii_bus *bus = priv->bus; |
| int value, ret; |
| |
| /* Write the desired MMD Devad */ |
| ret = bus->write(bus, 0, MII_MMD_CTRL, devad); |
| if (ret < 0) |
| goto err; |
| |
| /* Write the desired MMD register address */ |
| ret = bus->write(bus, 0, MII_MMD_DATA, prtad); |
| if (ret < 0) |
| goto err; |
| |
| /* Select the Function : DATA with no post increment */ |
| ret = bus->write(bus, 0, MII_MMD_CTRL, (devad | MII_MMD_CTRL_NOINCR)); |
| if (ret < 0) |
| goto err; |
| |
| /* Read the content of the MMD's selected register */ |
| value = bus->read(bus, 0, MII_MMD_DATA); |
| |
| return value; |
| err: |
| dev_err(&bus->dev, "failed to read mmd register\n"); |
| |
| return ret; |
| } |
| |
| static int |
| core_write_mmd_indirect(struct mt7530_priv *priv, int prtad, |
| int devad, u32 data) |
| { |
| struct mii_bus *bus = priv->bus; |
| int ret; |
| |
| /* Write the desired MMD Devad */ |
| ret = bus->write(bus, 0, MII_MMD_CTRL, devad); |
| if (ret < 0) |
| goto err; |
| |
| /* Write the desired MMD register address */ |
| ret = bus->write(bus, 0, MII_MMD_DATA, prtad); |
| if (ret < 0) |
| goto err; |
| |
| /* Select the Function : DATA with no post increment */ |
| ret = bus->write(bus, 0, MII_MMD_CTRL, (devad | MII_MMD_CTRL_NOINCR)); |
| if (ret < 0) |
| goto err; |
| |
| /* Write the data into MMD's selected register */ |
| ret = bus->write(bus, 0, MII_MMD_DATA, data); |
| err: |
| if (ret < 0) |
| dev_err(&bus->dev, |
| "failed to write mmd register\n"); |
| return ret; |
| } |
| |
| static void |
| core_write(struct mt7530_priv *priv, u32 reg, u32 val) |
| { |
| struct mii_bus *bus = priv->bus; |
| |
| mutex_lock_nested(&bus->mdio_lock, MDIO_MUTEX_NESTED); |
| |
| core_write_mmd_indirect(priv, reg, MDIO_MMD_VEND2, val); |
| |
| mutex_unlock(&bus->mdio_lock); |
| } |
| |
| static void |
| core_rmw(struct mt7530_priv *priv, u32 reg, u32 mask, u32 set) |
| { |
| struct mii_bus *bus = priv->bus; |
| u32 val; |
| |
| mutex_lock_nested(&bus->mdio_lock, MDIO_MUTEX_NESTED); |
| |
| val = core_read_mmd_indirect(priv, reg, MDIO_MMD_VEND2); |
| val &= ~mask; |
| val |= set; |
| core_write_mmd_indirect(priv, reg, MDIO_MMD_VEND2, val); |
| |
| mutex_unlock(&bus->mdio_lock); |
| } |
| |
| static void |
| core_set(struct mt7530_priv *priv, u32 reg, u32 val) |
| { |
| core_rmw(priv, reg, 0, val); |
| } |
| |
| static void |
| core_clear(struct mt7530_priv *priv, u32 reg, u32 val) |
| { |
| core_rmw(priv, reg, val, 0); |
| } |
| |
| static int |
| mt7530_mii_write(struct mt7530_priv *priv, u32 reg, u32 val) |
| { |
| struct mii_bus *bus = priv->bus; |
| u16 page, r, lo, hi; |
| int ret; |
| |
| page = (reg >> 6) & 0x3ff; |
| r = (reg >> 2) & 0xf; |
| lo = val & 0xffff; |
| hi = val >> 16; |
| |
| /* MT7530 uses 31 as the pseudo port */ |
| ret = bus->write(bus, 0x1f, 0x1f, page); |
| if (ret < 0) |
| goto err; |
| |
| ret = bus->write(bus, 0x1f, r, lo); |
| if (ret < 0) |
| goto err; |
| |
| ret = bus->write(bus, 0x1f, 0x10, hi); |
| err: |
| if (ret < 0) |
| dev_err(&bus->dev, |
| "failed to write mt7530 register\n"); |
| return ret; |
| } |
| |
| static u32 |
| mt7530_mii_read(struct mt7530_priv *priv, u32 reg) |
| { |
| struct mii_bus *bus = priv->bus; |
| u16 page, r, lo, hi; |
| int ret; |
| |
| page = (reg >> 6) & 0x3ff; |
| r = (reg >> 2) & 0xf; |
| |
| /* MT7530 uses 31 as the pseudo port */ |
| ret = bus->write(bus, 0x1f, 0x1f, page); |
| if (ret < 0) { |
| dev_err(&bus->dev, |
| "failed to read mt7530 register\n"); |
| return ret; |
| } |
| |
| lo = bus->read(bus, 0x1f, r); |
| hi = bus->read(bus, 0x1f, 0x10); |
| |
| return (hi << 16) | (lo & 0xffff); |
| } |
| |
| static void |
| mt7530_write(struct mt7530_priv *priv, u32 reg, u32 val) |
| { |
| struct mii_bus *bus = priv->bus; |
| |
| mutex_lock_nested(&bus->mdio_lock, MDIO_MUTEX_NESTED); |
| |
| mt7530_mii_write(priv, reg, val); |
| |
| mutex_unlock(&bus->mdio_lock); |
| } |
| |
| static u32 |
| _mt7530_read(struct mt7530_dummy_poll *p) |
| { |
| struct mii_bus *bus = p->priv->bus; |
| u32 val; |
| |
| mutex_lock_nested(&bus->mdio_lock, MDIO_MUTEX_NESTED); |
| |
| val = mt7530_mii_read(p->priv, p->reg); |
| |
| mutex_unlock(&bus->mdio_lock); |
| |
| return val; |
| } |
| |
| static u32 |
| mt7530_read(struct mt7530_priv *priv, u32 reg) |
| { |
| struct mt7530_dummy_poll p; |
| |
| INIT_MT7530_DUMMY_POLL(&p, priv, reg); |
| return _mt7530_read(&p); |
| } |
| |
| static void |
| mt7530_rmw(struct mt7530_priv *priv, u32 reg, |
| u32 mask, u32 set) |
| { |
| struct mii_bus *bus = priv->bus; |
| u32 val; |
| |
| mutex_lock_nested(&bus->mdio_lock, MDIO_MUTEX_NESTED); |
| |
| val = mt7530_mii_read(priv, reg); |
| val &= ~mask; |
| val |= set; |
| mt7530_mii_write(priv, reg, val); |
| |
| mutex_unlock(&bus->mdio_lock); |
| } |
| |
| static void |
| mt7530_set(struct mt7530_priv *priv, u32 reg, u32 val) |
| { |
| mt7530_rmw(priv, reg, 0, val); |
| } |
| |
| static void |
| mt7530_clear(struct mt7530_priv *priv, u32 reg, u32 val) |
| { |
| mt7530_rmw(priv, reg, val, 0); |
| } |
| |
| static int |
| mt7530_fdb_cmd(struct mt7530_priv *priv, enum mt7530_fdb_cmd cmd, u32 *rsp) |
| { |
| u32 val; |
| int ret; |
| struct mt7530_dummy_poll p; |
| |
| /* Set the command operating upon the MAC address entries */ |
| val = ATC_BUSY | ATC_MAT(0) | cmd; |
| mt7530_write(priv, MT7530_ATC, val); |
| |
| INIT_MT7530_DUMMY_POLL(&p, priv, MT7530_ATC); |
| ret = readx_poll_timeout(_mt7530_read, &p, val, |
| !(val & ATC_BUSY), 20, 20000); |
| if (ret < 0) { |
| dev_err(priv->dev, "reset timeout\n"); |
| return ret; |
| } |
| |
| /* Additional sanity for read command if the specified |
| * entry is invalid |
| */ |
| val = mt7530_read(priv, MT7530_ATC); |
| if ((cmd == MT7530_FDB_READ) && (val & ATC_INVALID)) |
| return -EINVAL; |
| |
| if (rsp) |
| *rsp = val; |
| |
| return 0; |
| } |
| |
| static void |
| mt7530_fdb_read(struct mt7530_priv *priv, struct mt7530_fdb *fdb) |
| { |
| u32 reg[3]; |
| int i; |
| |
| /* Read from ARL table into an array */ |
| for (i = 0; i < 3; i++) { |
| reg[i] = mt7530_read(priv, MT7530_TSRA1 + (i * 4)); |
| |
| dev_dbg(priv->dev, "%s(%d) reg[%d]=0x%x\n", |
| __func__, __LINE__, i, reg[i]); |
| } |
| |
| fdb->vid = (reg[1] >> CVID) & CVID_MASK; |
| fdb->aging = (reg[2] >> AGE_TIMER) & AGE_TIMER_MASK; |
| fdb->port_mask = (reg[2] >> PORT_MAP) & PORT_MAP_MASK; |
| fdb->mac[0] = (reg[0] >> MAC_BYTE_0) & MAC_BYTE_MASK; |
| fdb->mac[1] = (reg[0] >> MAC_BYTE_1) & MAC_BYTE_MASK; |
| fdb->mac[2] = (reg[0] >> MAC_BYTE_2) & MAC_BYTE_MASK; |
| fdb->mac[3] = (reg[0] >> MAC_BYTE_3) & MAC_BYTE_MASK; |
| fdb->mac[4] = (reg[1] >> MAC_BYTE_4) & MAC_BYTE_MASK; |
| fdb->mac[5] = (reg[1] >> MAC_BYTE_5) & MAC_BYTE_MASK; |
| fdb->noarp = ((reg[2] >> ENT_STATUS) & ENT_STATUS_MASK) == STATIC_ENT; |
| } |
| |
| static void |
| mt7530_fdb_write(struct mt7530_priv *priv, u16 vid, |
| u8 port_mask, const u8 *mac, |
| u8 aging, u8 type) |
| { |
| u32 reg[3] = { 0 }; |
| int i; |
| |
| reg[1] |= vid & CVID_MASK; |
| reg[2] |= (aging & AGE_TIMER_MASK) << AGE_TIMER; |
| reg[2] |= (port_mask & PORT_MAP_MASK) << PORT_MAP; |
| /* STATIC_ENT indicate that entry is static wouldn't |
| * be aged out and STATIC_EMP specified as erasing an |
| * entry |
| */ |
| reg[2] |= (type & ENT_STATUS_MASK) << ENT_STATUS; |
| reg[1] |= mac[5] << MAC_BYTE_5; |
| reg[1] |= mac[4] << MAC_BYTE_4; |
| reg[0] |= mac[3] << MAC_BYTE_3; |
| reg[0] |= mac[2] << MAC_BYTE_2; |
| reg[0] |= mac[1] << MAC_BYTE_1; |
| reg[0] |= mac[0] << MAC_BYTE_0; |
| |
| /* Write array into the ARL table */ |
| for (i = 0; i < 3; i++) |
| mt7530_write(priv, MT7530_ATA1 + (i * 4), reg[i]); |
| } |
| |
| static int |
| mt7530_pad_clk_setup(struct dsa_switch *ds, int mode) |
| { |
| struct mt7530_priv *priv = ds->priv; |
| u32 ncpo1, ssc_delta, trgint, i; |
| |
| switch (mode) { |
| case PHY_INTERFACE_MODE_RGMII: |
| trgint = 0; |
| ncpo1 = 0x0c80; |
| ssc_delta = 0x87; |
| break; |
| case PHY_INTERFACE_MODE_TRGMII: |
| trgint = 1; |
| ncpo1 = 0x1400; |
| ssc_delta = 0x57; |
| break; |
| default: |
| dev_err(priv->dev, "xMII mode %d not supported\n", mode); |
| return -EINVAL; |
| } |
| |
| mt7530_rmw(priv, MT7530_P6ECR, P6_INTF_MODE_MASK, |
| P6_INTF_MODE(trgint)); |
| |
| /* Lower Tx Driving for TRGMII path */ |
| for (i = 0 ; i < NUM_TRGMII_CTRL ; i++) |
| mt7530_write(priv, MT7530_TRGMII_TD_ODT(i), |
| TD_DM_DRVP(8) | TD_DM_DRVN(8)); |
| |
| /* Setup core clock for MT7530 */ |
| if (!trgint) { |
| /* Disable MT7530 core clock */ |
| core_clear(priv, CORE_TRGMII_GSW_CLK_CG, REG_GSWCK_EN); |
| |
| /* Disable PLL, since phy_device has not yet been created |
| * provided for phy_[read,write]_mmd_indirect is called, we |
| * provide our own core_write_mmd_indirect to complete this |
| * function. |
| */ |
| core_write_mmd_indirect(priv, |
| CORE_GSWPLL_GRP1, |
| MDIO_MMD_VEND2, |
| 0); |
| |
| /* Set core clock into 500Mhz */ |
| core_write(priv, CORE_GSWPLL_GRP2, |
| RG_GSWPLL_POSDIV_500M(1) | |
| RG_GSWPLL_FBKDIV_500M(25)); |
| |
| /* Enable PLL */ |
| core_write(priv, CORE_GSWPLL_GRP1, |
| RG_GSWPLL_EN_PRE | |
| RG_GSWPLL_POSDIV_200M(2) | |
| RG_GSWPLL_FBKDIV_200M(32)); |
| |
| /* Enable MT7530 core clock */ |
| core_set(priv, CORE_TRGMII_GSW_CLK_CG, REG_GSWCK_EN); |
| } |
| |
| /* Setup the MT7530 TRGMII Tx Clock */ |
| core_set(priv, CORE_TRGMII_GSW_CLK_CG, REG_GSWCK_EN); |
| core_write(priv, CORE_PLL_GROUP5, RG_LCDDS_PCW_NCPO1(ncpo1)); |
| core_write(priv, CORE_PLL_GROUP6, RG_LCDDS_PCW_NCPO0(0)); |
| core_write(priv, CORE_PLL_GROUP10, RG_LCDDS_SSC_DELTA(ssc_delta)); |
| core_write(priv, CORE_PLL_GROUP11, RG_LCDDS_SSC_DELTA1(ssc_delta)); |
| core_write(priv, CORE_PLL_GROUP4, |
| RG_SYSPLL_DDSFBK_EN | RG_SYSPLL_BIAS_EN | |
| RG_SYSPLL_BIAS_LPF_EN); |
| core_write(priv, CORE_PLL_GROUP2, |
| RG_SYSPLL_EN_NORMAL | RG_SYSPLL_VODEN | |
| RG_SYSPLL_POSDIV(1)); |
| core_write(priv, CORE_PLL_GROUP7, |
| RG_LCDDS_PCW_NCPO_CHG | RG_LCCDS_C(3) | |
| RG_LCDDS_PWDB | RG_LCDDS_ISO_EN); |
| core_set(priv, CORE_TRGMII_GSW_CLK_CG, |
| REG_GSWCK_EN | REG_TRGMIICK_EN); |
| |
| if (!trgint) |
| for (i = 0 ; i < NUM_TRGMII_CTRL; i++) |
| mt7530_rmw(priv, MT7530_TRGMII_RD(i), |
| RD_TAP_MASK, RD_TAP(16)); |
| else |
| mt7623_trgmii_set(priv, GSW_INTF_MODE, INTF_MODE_TRGMII); |
| |
| return 0; |
| } |
| |
| static int |
| mt7623_pad_clk_setup(struct dsa_switch *ds) |
| { |
| struct mt7530_priv *priv = ds->priv; |
| int i; |
| |
| for (i = 0 ; i < NUM_TRGMII_CTRL; i++) |
| mt7623_trgmii_write(priv, GSW_TRGMII_TD_ODT(i), |
| TD_DM_DRVP(8) | TD_DM_DRVN(8)); |
| |
| mt7623_trgmii_set(priv, GSW_TRGMII_RCK_CTRL, RX_RST | RXC_DQSISEL); |
| mt7623_trgmii_clear(priv, GSW_TRGMII_RCK_CTRL, RX_RST); |
| |
| return 0; |
| } |
| |
| static void |
| mt7530_mib_reset(struct dsa_switch *ds) |
| { |
| struct mt7530_priv *priv = ds->priv; |
| |
| mt7530_write(priv, MT7530_MIB_CCR, CCR_MIB_FLUSH); |
| mt7530_write(priv, MT7530_MIB_CCR, CCR_MIB_ACTIVATE); |
| } |
| |
| static void |
| mt7530_port_set_status(struct mt7530_priv *priv, int port, int enable) |
| { |
| u32 mask = PMCR_TX_EN | PMCR_RX_EN; |
| |
| if (enable) |
| mt7530_set(priv, MT7530_PMCR_P(port), mask); |
| else |
| mt7530_clear(priv, MT7530_PMCR_P(port), mask); |
| } |
| |
| static int mt7530_phy_read(struct dsa_switch *ds, int port, int regnum) |
| { |
| struct mt7530_priv *priv = ds->priv; |
| |
| return mdiobus_read_nested(priv->bus, port, regnum); |
| } |
| |
| int mt7530_phy_write(struct dsa_switch *ds, int port, int regnum, u16 val) |
| { |
| struct mt7530_priv *priv = ds->priv; |
| |
| return mdiobus_write_nested(priv->bus, port, regnum, val); |
| } |
| |
| static void |
| mt7530_get_strings(struct dsa_switch *ds, int port, uint8_t *data) |
| { |
| int i; |
| |
| for (i = 0; i < ARRAY_SIZE(mt7530_mib); i++) |
| strncpy(data + i * ETH_GSTRING_LEN, mt7530_mib[i].name, |
| ETH_GSTRING_LEN); |
| } |
| |
| static void |
| mt7530_get_ethtool_stats(struct dsa_switch *ds, int port, |
| uint64_t *data) |
| { |
| struct mt7530_priv *priv = ds->priv; |
| const struct mt7530_mib_desc *mib; |
| u32 reg, i; |
| u64 hi; |
| |
| for (i = 0; i < ARRAY_SIZE(mt7530_mib); i++) { |
| mib = &mt7530_mib[i]; |
| reg = MT7530_PORT_MIB_COUNTER(port) + mib->offset; |
| |
| data[i] = mt7530_read(priv, reg); |
| if (mib->size == 2) { |
| hi = mt7530_read(priv, reg + 4); |
| data[i] |= hi << 32; |
| } |
| } |
| } |
| |
| static int |
| mt7530_get_sset_count(struct dsa_switch *ds) |
| { |
| return ARRAY_SIZE(mt7530_mib); |
| } |
| |
| static void mt7530_adjust_link(struct dsa_switch *ds, int port, |
| struct phy_device *phydev) |
| { |
| struct mt7530_priv *priv = ds->priv; |
| |
| if (phy_is_pseudo_fixed_link(phydev)) { |
| dev_dbg(priv->dev, "phy-mode for master device = %x\n", |
| phydev->interface); |
| |
| /* Setup TX circuit incluing relevant PAD and driving */ |
| mt7530_pad_clk_setup(ds, phydev->interface); |
| |
| /* Setup RX circuit, relevant PAD and driving on the host |
| * which must be placed after the setup on the device side is |
| * all finished. |
| */ |
| mt7623_pad_clk_setup(ds); |
| } |
| } |
| |
| static int |
| mt7530_cpu_port_enable(struct mt7530_priv *priv, |
| int port) |
| { |
| /* Enable Mediatek header mode on the cpu port */ |
| mt7530_write(priv, MT7530_PVC_P(port), |
| PORT_SPEC_TAG); |
| |
| /* Setup the MAC by default for the cpu port */ |
| mt7530_write(priv, MT7530_PMCR_P(port), PMCR_CPUP_LINK); |
| |
| /* Disable auto learning on the cpu port */ |
| mt7530_set(priv, MT7530_PSC_P(port), SA_DIS); |
| |
| /* Unknown unicast frame fordwarding to the cpu port */ |
| mt7530_set(priv, MT7530_MFC, UNU_FFP(BIT(port))); |
| |
| /* CPU port gets connected to all user ports of |
| * the switch |
| */ |
| mt7530_write(priv, MT7530_PCR_P(port), |
| PCR_MATRIX(priv->ds->enabled_port_mask)); |
| |
| return 0; |
| } |
| |
| static int |
| mt7530_port_enable(struct dsa_switch *ds, int port, |
| struct phy_device *phy) |
| { |
| struct mt7530_priv *priv = ds->priv; |
| |
| mutex_lock(&priv->reg_mutex); |
| |
| /* Setup the MAC for the user port */ |
| mt7530_write(priv, MT7530_PMCR_P(port), PMCR_USERP_LINK); |
| |
| /* Allow the user port gets connected to the cpu port and also |
| * restore the port matrix if the port is the member of a certain |
| * bridge. |
| */ |
| priv->ports[port].pm |= PCR_MATRIX(BIT(MT7530_CPU_PORT)); |
| priv->ports[port].enable = true; |
| mt7530_rmw(priv, MT7530_PCR_P(port), PCR_MATRIX_MASK, |
| priv->ports[port].pm); |
| mt7530_port_set_status(priv, port, 1); |
| |
| mutex_unlock(&priv->reg_mutex); |
| |
| return 0; |
| } |
| |
| static void |
| mt7530_port_disable(struct dsa_switch *ds, int port, |
| struct phy_device *phy) |
| { |
| struct mt7530_priv *priv = ds->priv; |
| |
| mutex_lock(&priv->reg_mutex); |
| |
| /* Clear up all port matrix which could be restored in the next |
| * enablement for the port. |
| */ |
| priv->ports[port].enable = false; |
| mt7530_rmw(priv, MT7530_PCR_P(port), PCR_MATRIX_MASK, |
| PCR_MATRIX_CLR); |
| mt7530_port_set_status(priv, port, 0); |
| |
| mutex_unlock(&priv->reg_mutex); |
| } |
| |
| static void |
| mt7530_stp_state_set(struct dsa_switch *ds, int port, u8 state) |
| { |
| struct mt7530_priv *priv = ds->priv; |
| u32 stp_state; |
| |
| switch (state) { |
| case BR_STATE_DISABLED: |
| stp_state = MT7530_STP_DISABLED; |
| break; |
| case BR_STATE_BLOCKING: |
| stp_state = MT7530_STP_BLOCKING; |
| break; |
| case BR_STATE_LISTENING: |
| stp_state = MT7530_STP_LISTENING; |
| break; |
| case BR_STATE_LEARNING: |
| stp_state = MT7530_STP_LEARNING; |
| break; |
| case BR_STATE_FORWARDING: |
| default: |
| stp_state = MT7530_STP_FORWARDING; |
| break; |
| } |
| |
| mt7530_rmw(priv, MT7530_SSP_P(port), FID_PST_MASK, stp_state); |
| } |
| |
| static int |
| mt7530_port_bridge_join(struct dsa_switch *ds, int port, |
| struct net_device *bridge) |
| { |
| struct mt7530_priv *priv = ds->priv; |
| u32 port_bitmap = BIT(MT7530_CPU_PORT); |
| int i; |
| |
| mutex_lock(&priv->reg_mutex); |
| |
| for (i = 0; i < MT7530_NUM_PORTS; i++) { |
| /* Add this port to the port matrix of the other ports in the |
| * same bridge. If the port is disabled, port matrix is kept |
| * and not being setup until the port becomes enabled. |
| */ |
| if (ds->enabled_port_mask & BIT(i) && i != port) { |
| if (ds->ports[i].bridge_dev != bridge) |
| continue; |
| if (priv->ports[i].enable) |
| mt7530_set(priv, MT7530_PCR_P(i), |
| PCR_MATRIX(BIT(port))); |
| priv->ports[i].pm |= PCR_MATRIX(BIT(port)); |
| |
| port_bitmap |= BIT(i); |
| } |
| } |
| |
| /* Add the all other ports to this port matrix. */ |
| if (priv->ports[port].enable) |
| mt7530_rmw(priv, MT7530_PCR_P(port), |
| PCR_MATRIX_MASK, PCR_MATRIX(port_bitmap)); |
| priv->ports[port].pm |= PCR_MATRIX(port_bitmap); |
| |
| mutex_unlock(&priv->reg_mutex); |
| |
| return 0; |
| } |
| |
| static void |
| mt7530_port_bridge_leave(struct dsa_switch *ds, int port, |
| struct net_device *bridge) |
| { |
| struct mt7530_priv *priv = ds->priv; |
| int i; |
| |
| mutex_lock(&priv->reg_mutex); |
| |
| for (i = 0; i < MT7530_NUM_PORTS; i++) { |
| /* Remove this port from the port matrix of the other ports |
| * in the same bridge. If the port is disabled, port matrix |
| * is kept and not being setup until the port becomes enabled. |
| */ |
| if (ds->enabled_port_mask & BIT(i) && i != port) { |
| if (ds->ports[i].bridge_dev != bridge) |
| continue; |
| if (priv->ports[i].enable) |
| mt7530_clear(priv, MT7530_PCR_P(i), |
| PCR_MATRIX(BIT(port))); |
| priv->ports[i].pm &= ~PCR_MATRIX(BIT(port)); |
| } |
| } |
| |
| /* Set the cpu port to be the only one in the port matrix of |
| * this port. |
| */ |
| if (priv->ports[port].enable) |
| mt7530_rmw(priv, MT7530_PCR_P(port), PCR_MATRIX_MASK, |
| PCR_MATRIX(BIT(MT7530_CPU_PORT))); |
| priv->ports[port].pm = PCR_MATRIX(BIT(MT7530_CPU_PORT)); |
| |
| mutex_unlock(&priv->reg_mutex); |
| } |
| |
| static int |
| mt7530_port_fdb_prepare(struct dsa_switch *ds, int port, |
| const struct switchdev_obj_port_fdb *fdb, |
| struct switchdev_trans *trans) |
| { |
| struct mt7530_priv *priv = ds->priv; |
| int ret; |
| |
| /* Because auto-learned entrie shares the same FDB table. |
| * an entry is reserved with no port_mask to make sure fdb_add |
| * is called while the entry is still available. |
| */ |
| mutex_lock(&priv->reg_mutex); |
| mt7530_fdb_write(priv, fdb->vid, 0, fdb->addr, -1, STATIC_ENT); |
| ret = mt7530_fdb_cmd(priv, MT7530_FDB_WRITE, 0); |
| mutex_unlock(&priv->reg_mutex); |
| |
| return ret; |
| } |
| |
| static void |
| mt7530_port_fdb_add(struct dsa_switch *ds, int port, |
| const struct switchdev_obj_port_fdb *fdb, |
| struct switchdev_trans *trans) |
| { |
| struct mt7530_priv *priv = ds->priv; |
| u8 port_mask = BIT(port); |
| |
| mutex_lock(&priv->reg_mutex); |
| mt7530_fdb_write(priv, fdb->vid, port_mask, fdb->addr, -1, STATIC_ENT); |
| mt7530_fdb_cmd(priv, MT7530_FDB_WRITE, 0); |
| mutex_unlock(&priv->reg_mutex); |
| } |
| |
| static int |
| mt7530_port_fdb_del(struct dsa_switch *ds, int port, |
| const struct switchdev_obj_port_fdb *fdb) |
| { |
| struct mt7530_priv *priv = ds->priv; |
| int ret; |
| u8 port_mask = BIT(port); |
| |
| mutex_lock(&priv->reg_mutex); |
| mt7530_fdb_write(priv, fdb->vid, port_mask, fdb->addr, -1, STATIC_EMP); |
| ret = mt7530_fdb_cmd(priv, MT7530_FDB_WRITE, 0); |
| mutex_unlock(&priv->reg_mutex); |
| |
| return ret; |
| } |
| |
| static int |
| mt7530_port_fdb_dump(struct dsa_switch *ds, int port, |
| struct switchdev_obj_port_fdb *fdb, |
| int (*cb)(struct switchdev_obj *obj)) |
| { |
| struct mt7530_priv *priv = ds->priv; |
| struct mt7530_fdb _fdb = { 0 }; |
| int cnt = MT7530_NUM_FDB_RECORDS; |
| int ret = 0; |
| u32 rsp = 0; |
| |
| mutex_lock(&priv->reg_mutex); |
| |
| ret = mt7530_fdb_cmd(priv, MT7530_FDB_START, &rsp); |
| if (ret < 0) |
| goto err; |
| |
| do { |
| if (rsp & ATC_SRCH_HIT) { |
| mt7530_fdb_read(priv, &_fdb); |
| if (_fdb.port_mask & BIT(port)) { |
| ether_addr_copy(fdb->addr, _fdb.mac); |
| fdb->vid = _fdb.vid; |
| fdb->ndm_state = _fdb.noarp ? |
| NUD_NOARP : NUD_REACHABLE; |
| ret = cb(&fdb->obj); |
| if (ret < 0) |
| break; |
| } |
| } |
| } while (--cnt && |
| !(rsp & ATC_SRCH_END) && |
| !mt7530_fdb_cmd(priv, MT7530_FDB_NEXT, &rsp)); |
| err: |
| mutex_unlock(&priv->reg_mutex); |
| |
| return 0; |
| } |
| |
| static enum dsa_tag_protocol |
| mtk_get_tag_protocol(struct dsa_switch *ds) |
| { |
| struct mt7530_priv *priv = ds->priv; |
| |
| if (!dsa_is_cpu_port(ds, MT7530_CPU_PORT)) { |
| dev_warn(priv->dev, |
| "port not matched with tagging CPU port\n"); |
| return DSA_TAG_PROTO_NONE; |
| } else { |
| return DSA_TAG_PROTO_MTK; |
| } |
| } |
| |
| static int |
| mt7530_setup(struct dsa_switch *ds) |
| { |
| struct mt7530_priv *priv = ds->priv; |
| int ret, i; |
| u32 id, val; |
| struct device_node *dn; |
| struct mt7530_dummy_poll p; |
| |
| /* The parent node of master_netdev which holds the common system |
| * controller also is the container for two GMACs nodes representing |
| * as two netdev instances. |
| */ |
| dn = ds->master_netdev->dev.of_node->parent; |
| priv->ethernet = syscon_node_to_regmap(dn); |
| if (IS_ERR(priv->ethernet)) |
| return PTR_ERR(priv->ethernet); |
| |
| regulator_set_voltage(priv->core_pwr, 1000000, 1000000); |
| ret = regulator_enable(priv->core_pwr); |
| if (ret < 0) { |
| dev_err(priv->dev, |
| "Failed to enable core power: %d\n", ret); |
| return ret; |
| } |
| |
| regulator_set_voltage(priv->io_pwr, 3300000, 3300000); |
| ret = regulator_enable(priv->io_pwr); |
| if (ret < 0) { |
| dev_err(priv->dev, "Failed to enable io pwr: %d\n", |
| ret); |
| return ret; |
| } |
| |
| /* Reset whole chip through gpio pin or memory-mapped registers for |
| * different type of hardware |
| */ |
| if (priv->mcm) { |
| reset_control_assert(priv->rstc); |
| usleep_range(1000, 1100); |
| reset_control_deassert(priv->rstc); |
| } else { |
| gpiod_set_value_cansleep(priv->reset, 0); |
| usleep_range(1000, 1100); |
| gpiod_set_value_cansleep(priv->reset, 1); |
| } |
| |
| /* Waiting for MT7530 got to stable */ |
| INIT_MT7530_DUMMY_POLL(&p, priv, MT7530_HWTRAP); |
| ret = readx_poll_timeout(_mt7530_read, &p, val, val != 0, |
| 20, 1000000); |
| if (ret < 0) { |
| dev_err(priv->dev, "reset timeout\n"); |
| return ret; |
| } |
| |
| id = mt7530_read(priv, MT7530_CREV); |
| id >>= CHIP_NAME_SHIFT; |
| if (id != MT7530_ID) { |
| dev_err(priv->dev, "chip %x can't be supported\n", id); |
| return -ENODEV; |
| } |
| |
| /* Reset the switch through internal reset */ |
| mt7530_write(priv, MT7530_SYS_CTRL, |
| SYS_CTRL_PHY_RST | SYS_CTRL_SW_RST | |
| SYS_CTRL_REG_RST); |
| |
| /* Enable Port 6 only; P5 as GMAC5 which currently is not supported */ |
| val = mt7530_read(priv, MT7530_MHWTRAP); |
| val &= ~MHWTRAP_P6_DIS & ~MHWTRAP_PHY_ACCESS; |
| val |= MHWTRAP_MANUAL; |
| mt7530_write(priv, MT7530_MHWTRAP, val); |
| |
| /* Enable and reset MIB counters */ |
| mt7530_mib_reset(ds); |
| |
| mt7530_clear(priv, MT7530_MFC, UNU_FFP_MASK); |
| |
| for (i = 0; i < MT7530_NUM_PORTS; i++) { |
| /* Disable forwarding by default on all ports */ |
| mt7530_rmw(priv, MT7530_PCR_P(i), PCR_MATRIX_MASK, |
| PCR_MATRIX_CLR); |
| |
| if (dsa_is_cpu_port(ds, i)) |
| mt7530_cpu_port_enable(priv, i); |
| else |
| mt7530_port_disable(ds, i, NULL); |
| } |
| |
| /* Flush the FDB table */ |
| ret = mt7530_fdb_cmd(priv, MT7530_FDB_FLUSH, 0); |
| if (ret < 0) |
| return ret; |
| |
| return 0; |
| } |
| |
| static struct dsa_switch_ops mt7530_switch_ops = { |
| .get_tag_protocol = mtk_get_tag_protocol, |
| .setup = mt7530_setup, |
| .get_strings = mt7530_get_strings, |
| .phy_read = mt7530_phy_read, |
| .phy_write = mt7530_phy_write, |
| .get_ethtool_stats = mt7530_get_ethtool_stats, |
| .get_sset_count = mt7530_get_sset_count, |
| .adjust_link = mt7530_adjust_link, |
| .port_enable = mt7530_port_enable, |
| .port_disable = mt7530_port_disable, |
| .port_stp_state_set = mt7530_stp_state_set, |
| .port_bridge_join = mt7530_port_bridge_join, |
| .port_bridge_leave = mt7530_port_bridge_leave, |
| .port_fdb_prepare = mt7530_port_fdb_prepare, |
| .port_fdb_add = mt7530_port_fdb_add, |
| .port_fdb_del = mt7530_port_fdb_del, |
| .port_fdb_dump = mt7530_port_fdb_dump, |
| }; |
| |
| static int |
| mt7530_probe(struct mdio_device *mdiodev) |
| { |
| struct mt7530_priv *priv; |
| struct device_node *dn; |
| |
| dn = mdiodev->dev.of_node; |
| |
| priv = devm_kzalloc(&mdiodev->dev, sizeof(*priv), GFP_KERNEL); |
| if (!priv) |
| return -ENOMEM; |
| |
| priv->ds = dsa_switch_alloc(&mdiodev->dev, DSA_MAX_PORTS); |
| if (!priv->ds) |
| return -ENOMEM; |
| |
| /* Use medatek,mcm property to distinguish hardware type that would |
| * casues a little bit differences on power-on sequence. |
| */ |
| priv->mcm = of_property_read_bool(dn, "mediatek,mcm"); |
| if (priv->mcm) { |
| dev_info(&mdiodev->dev, "MT7530 adapts as multi-chip module\n"); |
| |
| priv->rstc = devm_reset_control_get(&mdiodev->dev, "mcm"); |
| if (IS_ERR(priv->rstc)) { |
| dev_err(&mdiodev->dev, "Couldn't get our reset line\n"); |
| return PTR_ERR(priv->rstc); |
| } |
| } |
| |
| priv->core_pwr = devm_regulator_get(&mdiodev->dev, "core"); |
| if (IS_ERR(priv->core_pwr)) |
| return PTR_ERR(priv->core_pwr); |
| |
| priv->io_pwr = devm_regulator_get(&mdiodev->dev, "io"); |
| if (IS_ERR(priv->io_pwr)) |
| return PTR_ERR(priv->io_pwr); |
| |
| /* Not MCM that indicates switch works as the remote standalone |
| * integrated circuit so the GPIO pin would be used to complete |
| * the reset, otherwise memory-mapped register accessing used |
| * through syscon provides in the case of MCM. |
| */ |
| if (!priv->mcm) { |
| priv->reset = devm_gpiod_get_optional(&mdiodev->dev, "reset", |
| GPIOD_OUT_LOW); |
| if (IS_ERR(priv->reset)) { |
| dev_err(&mdiodev->dev, "Couldn't get our reset line\n"); |
| return PTR_ERR(priv->reset); |
| } |
| } |
| |
| priv->bus = mdiodev->bus; |
| priv->dev = &mdiodev->dev; |
| priv->ds->priv = priv; |
| priv->ds->ops = &mt7530_switch_ops; |
| mutex_init(&priv->reg_mutex); |
| dev_set_drvdata(&mdiodev->dev, priv); |
| |
| return dsa_register_switch(priv->ds, &mdiodev->dev); |
| } |
| |
| static void |
| mt7530_remove(struct mdio_device *mdiodev) |
| { |
| struct mt7530_priv *priv = dev_get_drvdata(&mdiodev->dev); |
| int ret = 0; |
| |
| ret = regulator_disable(priv->core_pwr); |
| if (ret < 0) |
| dev_err(priv->dev, |
| "Failed to disable core power: %d\n", ret); |
| |
| ret = regulator_disable(priv->io_pwr); |
| if (ret < 0) |
| dev_err(priv->dev, "Failed to disable io pwr: %d\n", |
| ret); |
| |
| dsa_unregister_switch(priv->ds); |
| mutex_destroy(&priv->reg_mutex); |
| } |
| |
| static const struct of_device_id mt7530_of_match[] = { |
| { .compatible = "mediatek,mt7530" }, |
| { /* sentinel */ }, |
| }; |
| |
| static struct mdio_driver mt7530_mdio_driver = { |
| .probe = mt7530_probe, |
| .remove = mt7530_remove, |
| .mdiodrv.driver = { |
| .name = "mt7530", |
| .of_match_table = mt7530_of_match, |
| }, |
| }; |
| |
| mdio_module_driver(mt7530_mdio_driver); |
| |
| MODULE_AUTHOR("Sean Wang <sean.wang@mediatek.com>"); |
| MODULE_DESCRIPTION("Driver for Mediatek MT7530 Switch"); |
| MODULE_LICENSE("GPL"); |
| MODULE_ALIAS("platform:mediatek-mt7530"); |