| #include <linux/init.h> |
| |
| #include <linux/mm.h> |
| #include <linux/spinlock.h> |
| #include <linux/smp.h> |
| #include <linux/interrupt.h> |
| #include <linux/export.h> |
| #include <linux/cpu.h> |
| |
| #include <asm/tlbflush.h> |
| #include <asm/mmu_context.h> |
| #include <asm/cache.h> |
| #include <asm/apic.h> |
| #include <asm/uv/uv.h> |
| #include <linux/debugfs.h> |
| |
| /* |
| * Smarter SMP flushing macros. |
| * c/o Linus Torvalds. |
| * |
| * These mean you can really definitely utterly forget about |
| * writing to user space from interrupts. (Its not allowed anyway). |
| * |
| * Optimizations Manfred Spraul <manfred@colorfullife.com> |
| * |
| * More scalable flush, from Andi Kleen |
| * |
| * Implement flush IPI by CALL_FUNCTION_VECTOR, Alex Shi |
| */ |
| |
| #ifdef CONFIG_SMP |
| |
| struct flush_tlb_info { |
| struct mm_struct *flush_mm; |
| unsigned long flush_start; |
| unsigned long flush_end; |
| }; |
| |
| /* |
| * We cannot call mmdrop() because we are in interrupt context, |
| * instead update mm->cpu_vm_mask. |
| */ |
| void leave_mm(int cpu) |
| { |
| struct mm_struct *active_mm = this_cpu_read(cpu_tlbstate.active_mm); |
| if (this_cpu_read(cpu_tlbstate.state) == TLBSTATE_OK) |
| BUG(); |
| if (cpumask_test_cpu(cpu, mm_cpumask(active_mm))) { |
| cpumask_clear_cpu(cpu, mm_cpumask(active_mm)); |
| load_cr3(swapper_pg_dir); |
| /* |
| * This gets called in the idle path where RCU |
| * functions differently. Tracing normally |
| * uses RCU, so we have to call the tracepoint |
| * specially here. |
| */ |
| trace_tlb_flush_rcuidle(TLB_FLUSH_ON_TASK_SWITCH, TLB_FLUSH_ALL); |
| } |
| } |
| EXPORT_SYMBOL_GPL(leave_mm); |
| |
| #endif /* CONFIG_SMP */ |
| |
| void switch_mm(struct mm_struct *prev, struct mm_struct *next, |
| struct task_struct *tsk) |
| { |
| unsigned long flags; |
| |
| local_irq_save(flags); |
| switch_mm_irqs_off(prev, next, tsk); |
| local_irq_restore(flags); |
| } |
| |
| void switch_mm_irqs_off(struct mm_struct *prev, struct mm_struct *next, |
| struct task_struct *tsk) |
| { |
| unsigned cpu = smp_processor_id(); |
| |
| if (likely(prev != next)) { |
| if (IS_ENABLED(CONFIG_VMAP_STACK)) { |
| /* |
| * If our current stack is in vmalloc space and isn't |
| * mapped in the new pgd, we'll double-fault. Forcibly |
| * map it. |
| */ |
| unsigned int stack_pgd_index = pgd_index(current_stack_pointer()); |
| |
| pgd_t *pgd = next->pgd + stack_pgd_index; |
| |
| if (unlikely(pgd_none(*pgd))) |
| set_pgd(pgd, init_mm.pgd[stack_pgd_index]); |
| } |
| |
| #ifdef CONFIG_SMP |
| this_cpu_write(cpu_tlbstate.state, TLBSTATE_OK); |
| this_cpu_write(cpu_tlbstate.active_mm, next); |
| #endif |
| |
| cpumask_set_cpu(cpu, mm_cpumask(next)); |
| |
| /* |
| * Re-load page tables. |
| * |
| * This logic has an ordering constraint: |
| * |
| * CPU 0: Write to a PTE for 'next' |
| * CPU 0: load bit 1 in mm_cpumask. if nonzero, send IPI. |
| * CPU 1: set bit 1 in next's mm_cpumask |
| * CPU 1: load from the PTE that CPU 0 writes (implicit) |
| * |
| * We need to prevent an outcome in which CPU 1 observes |
| * the new PTE value and CPU 0 observes bit 1 clear in |
| * mm_cpumask. (If that occurs, then the IPI will never |
| * be sent, and CPU 0's TLB will contain a stale entry.) |
| * |
| * The bad outcome can occur if either CPU's load is |
| * reordered before that CPU's store, so both CPUs must |
| * execute full barriers to prevent this from happening. |
| * |
| * Thus, switch_mm needs a full barrier between the |
| * store to mm_cpumask and any operation that could load |
| * from next->pgd. TLB fills are special and can happen |
| * due to instruction fetches or for no reason at all, |
| * and neither LOCK nor MFENCE orders them. |
| * Fortunately, load_cr3() is serializing and gives the |
| * ordering guarantee we need. |
| * |
| */ |
| load_cr3(next->pgd); |
| |
| trace_tlb_flush(TLB_FLUSH_ON_TASK_SWITCH, TLB_FLUSH_ALL); |
| |
| /* Stop flush ipis for the previous mm */ |
| cpumask_clear_cpu(cpu, mm_cpumask(prev)); |
| |
| /* Load per-mm CR4 state */ |
| load_mm_cr4(next); |
| |
| #ifdef CONFIG_MODIFY_LDT_SYSCALL |
| /* |
| * Load the LDT, if the LDT is different. |
| * |
| * It's possible that prev->context.ldt doesn't match |
| * the LDT register. This can happen if leave_mm(prev) |
| * was called and then modify_ldt changed |
| * prev->context.ldt but suppressed an IPI to this CPU. |
| * In this case, prev->context.ldt != NULL, because we |
| * never set context.ldt to NULL while the mm still |
| * exists. That means that next->context.ldt != |
| * prev->context.ldt, because mms never share an LDT. |
| */ |
| if (unlikely(prev->context.ldt != next->context.ldt)) |
| load_mm_ldt(next); |
| #endif |
| } |
| #ifdef CONFIG_SMP |
| else { |
| this_cpu_write(cpu_tlbstate.state, TLBSTATE_OK); |
| BUG_ON(this_cpu_read(cpu_tlbstate.active_mm) != next); |
| |
| if (!cpumask_test_cpu(cpu, mm_cpumask(next))) { |
| /* |
| * On established mms, the mm_cpumask is only changed |
| * from irq context, from ptep_clear_flush() while in |
| * lazy tlb mode, and here. Irqs are blocked during |
| * schedule, protecting us from simultaneous changes. |
| */ |
| cpumask_set_cpu(cpu, mm_cpumask(next)); |
| |
| /* |
| * We were in lazy tlb mode and leave_mm disabled |
| * tlb flush IPI delivery. We must reload CR3 |
| * to make sure to use no freed page tables. |
| * |
| * As above, load_cr3() is serializing and orders TLB |
| * fills with respect to the mm_cpumask write. |
| */ |
| load_cr3(next->pgd); |
| trace_tlb_flush(TLB_FLUSH_ON_TASK_SWITCH, TLB_FLUSH_ALL); |
| load_mm_cr4(next); |
| load_mm_ldt(next); |
| } |
| } |
| #endif |
| } |
| |
| #ifdef CONFIG_SMP |
| |
| /* |
| * The flush IPI assumes that a thread switch happens in this order: |
| * [cpu0: the cpu that switches] |
| * 1) switch_mm() either 1a) or 1b) |
| * 1a) thread switch to a different mm |
| * 1a1) set cpu_tlbstate to TLBSTATE_OK |
| * Now the tlb flush NMI handler flush_tlb_func won't call leave_mm |
| * if cpu0 was in lazy tlb mode. |
| * 1a2) update cpu active_mm |
| * Now cpu0 accepts tlb flushes for the new mm. |
| * 1a3) cpu_set(cpu, new_mm->cpu_vm_mask); |
| * Now the other cpus will send tlb flush ipis. |
| * 1a4) change cr3. |
| * 1a5) cpu_clear(cpu, old_mm->cpu_vm_mask); |
| * Stop ipi delivery for the old mm. This is not synchronized with |
| * the other cpus, but flush_tlb_func ignore flush ipis for the wrong |
| * mm, and in the worst case we perform a superfluous tlb flush. |
| * 1b) thread switch without mm change |
| * cpu active_mm is correct, cpu0 already handles flush ipis. |
| * 1b1) set cpu_tlbstate to TLBSTATE_OK |
| * 1b2) test_and_set the cpu bit in cpu_vm_mask. |
| * Atomically set the bit [other cpus will start sending flush ipis], |
| * and test the bit. |
| * 1b3) if the bit was 0: leave_mm was called, flush the tlb. |
| * 2) switch %%esp, ie current |
| * |
| * The interrupt must handle 2 special cases: |
| * - cr3 is changed before %%esp, ie. it cannot use current->{active_,}mm. |
| * - the cpu performs speculative tlb reads, i.e. even if the cpu only |
| * runs in kernel space, the cpu could load tlb entries for user space |
| * pages. |
| * |
| * The good news is that cpu_tlbstate is local to each cpu, no |
| * write/read ordering problems. |
| */ |
| |
| /* |
| * TLB flush funcation: |
| * 1) Flush the tlb entries if the cpu uses the mm that's being flushed. |
| * 2) Leave the mm if we are in the lazy tlb mode. |
| */ |
| static void flush_tlb_func(void *info) |
| { |
| struct flush_tlb_info *f = info; |
| |
| inc_irq_stat(irq_tlb_count); |
| |
| if (f->flush_mm && f->flush_mm != this_cpu_read(cpu_tlbstate.active_mm)) |
| return; |
| |
| count_vm_tlb_event(NR_TLB_REMOTE_FLUSH_RECEIVED); |
| if (this_cpu_read(cpu_tlbstate.state) == TLBSTATE_OK) { |
| if (f->flush_end == TLB_FLUSH_ALL) { |
| local_flush_tlb(); |
| trace_tlb_flush(TLB_REMOTE_SHOOTDOWN, TLB_FLUSH_ALL); |
| } else { |
| unsigned long addr; |
| unsigned long nr_pages = |
| (f->flush_end - f->flush_start) / PAGE_SIZE; |
| addr = f->flush_start; |
| while (addr < f->flush_end) { |
| __flush_tlb_single(addr); |
| addr += PAGE_SIZE; |
| } |
| trace_tlb_flush(TLB_REMOTE_SHOOTDOWN, nr_pages); |
| } |
| } else |
| leave_mm(smp_processor_id()); |
| |
| } |
| |
| void native_flush_tlb_others(const struct cpumask *cpumask, |
| struct mm_struct *mm, unsigned long start, |
| unsigned long end) |
| { |
| struct flush_tlb_info info; |
| |
| info.flush_mm = mm; |
| info.flush_start = start; |
| info.flush_end = end; |
| |
| count_vm_tlb_event(NR_TLB_REMOTE_FLUSH); |
| if (end == TLB_FLUSH_ALL) |
| trace_tlb_flush(TLB_REMOTE_SEND_IPI, TLB_FLUSH_ALL); |
| else |
| trace_tlb_flush(TLB_REMOTE_SEND_IPI, |
| (end - start) >> PAGE_SHIFT); |
| |
| if (is_uv_system()) { |
| unsigned int cpu; |
| |
| cpu = smp_processor_id(); |
| cpumask = uv_flush_tlb_others(cpumask, mm, start, end, cpu); |
| if (cpumask) |
| smp_call_function_many(cpumask, flush_tlb_func, |
| &info, 1); |
| return; |
| } |
| smp_call_function_many(cpumask, flush_tlb_func, &info, 1); |
| } |
| |
| /* |
| * See Documentation/x86/tlb.txt for details. We choose 33 |
| * because it is large enough to cover the vast majority (at |
| * least 95%) of allocations, and is small enough that we are |
| * confident it will not cause too much overhead. Each single |
| * flush is about 100 ns, so this caps the maximum overhead at |
| * _about_ 3,000 ns. |
| * |
| * This is in units of pages. |
| */ |
| static unsigned long tlb_single_page_flush_ceiling __read_mostly = 33; |
| |
| void flush_tlb_mm_range(struct mm_struct *mm, unsigned long start, |
| unsigned long end, unsigned long vmflag) |
| { |
| unsigned long addr; |
| /* do a global flush by default */ |
| unsigned long base_pages_to_flush = TLB_FLUSH_ALL; |
| |
| preempt_disable(); |
| |
| if ((end != TLB_FLUSH_ALL) && !(vmflag & VM_HUGETLB)) |
| base_pages_to_flush = (end - start) >> PAGE_SHIFT; |
| if (base_pages_to_flush > tlb_single_page_flush_ceiling) |
| base_pages_to_flush = TLB_FLUSH_ALL; |
| |
| if (current->active_mm != mm) { |
| /* Synchronize with switch_mm. */ |
| smp_mb(); |
| |
| goto out; |
| } |
| |
| if (!current->mm) { |
| leave_mm(smp_processor_id()); |
| |
| /* Synchronize with switch_mm. */ |
| smp_mb(); |
| |
| goto out; |
| } |
| |
| /* |
| * Both branches below are implicit full barriers (MOV to CR or |
| * INVLPG) that synchronize with switch_mm. |
| */ |
| if (base_pages_to_flush == TLB_FLUSH_ALL) { |
| count_vm_tlb_event(NR_TLB_LOCAL_FLUSH_ALL); |
| local_flush_tlb(); |
| } else { |
| /* flush range by one by one 'invlpg' */ |
| for (addr = start; addr < end; addr += PAGE_SIZE) { |
| count_vm_tlb_event(NR_TLB_LOCAL_FLUSH_ONE); |
| __flush_tlb_single(addr); |
| } |
| } |
| trace_tlb_flush(TLB_LOCAL_MM_SHOOTDOWN, base_pages_to_flush); |
| out: |
| if (base_pages_to_flush == TLB_FLUSH_ALL) { |
| start = 0UL; |
| end = TLB_FLUSH_ALL; |
| } |
| if (cpumask_any_but(mm_cpumask(mm), smp_processor_id()) < nr_cpu_ids) |
| flush_tlb_others(mm_cpumask(mm), mm, start, end); |
| preempt_enable(); |
| } |
| |
| void flush_tlb_page(struct vm_area_struct *vma, unsigned long start) |
| { |
| struct mm_struct *mm = vma->vm_mm; |
| |
| preempt_disable(); |
| |
| if (current->active_mm == mm) { |
| if (current->mm) { |
| /* |
| * Implicit full barrier (INVLPG) that synchronizes |
| * with switch_mm. |
| */ |
| __flush_tlb_one(start); |
| } else { |
| leave_mm(smp_processor_id()); |
| |
| /* Synchronize with switch_mm. */ |
| smp_mb(); |
| } |
| } |
| |
| if (cpumask_any_but(mm_cpumask(mm), smp_processor_id()) < nr_cpu_ids) |
| flush_tlb_others(mm_cpumask(mm), mm, start, start + PAGE_SIZE); |
| |
| preempt_enable(); |
| } |
| |
| static void do_flush_tlb_all(void *info) |
| { |
| count_vm_tlb_event(NR_TLB_REMOTE_FLUSH_RECEIVED); |
| __flush_tlb_all(); |
| if (this_cpu_read(cpu_tlbstate.state) == TLBSTATE_LAZY) |
| leave_mm(smp_processor_id()); |
| } |
| |
| void flush_tlb_all(void) |
| { |
| count_vm_tlb_event(NR_TLB_REMOTE_FLUSH); |
| on_each_cpu(do_flush_tlb_all, NULL, 1); |
| } |
| |
| static void do_kernel_range_flush(void *info) |
| { |
| struct flush_tlb_info *f = info; |
| unsigned long addr; |
| |
| /* flush range by one by one 'invlpg' */ |
| for (addr = f->flush_start; addr < f->flush_end; addr += PAGE_SIZE) |
| __flush_tlb_single(addr); |
| } |
| |
| void flush_tlb_kernel_range(unsigned long start, unsigned long end) |
| { |
| |
| /* Balance as user space task's flush, a bit conservative */ |
| if (end == TLB_FLUSH_ALL || |
| (end - start) > tlb_single_page_flush_ceiling * PAGE_SIZE) { |
| on_each_cpu(do_flush_tlb_all, NULL, 1); |
| } else { |
| struct flush_tlb_info info; |
| info.flush_start = start; |
| info.flush_end = end; |
| on_each_cpu(do_kernel_range_flush, &info, 1); |
| } |
| } |
| |
| static ssize_t tlbflush_read_file(struct file *file, char __user *user_buf, |
| size_t count, loff_t *ppos) |
| { |
| char buf[32]; |
| unsigned int len; |
| |
| len = sprintf(buf, "%ld\n", tlb_single_page_flush_ceiling); |
| return simple_read_from_buffer(user_buf, count, ppos, buf, len); |
| } |
| |
| static ssize_t tlbflush_write_file(struct file *file, |
| const char __user *user_buf, size_t count, loff_t *ppos) |
| { |
| char buf[32]; |
| ssize_t len; |
| int ceiling; |
| |
| len = min(count, sizeof(buf) - 1); |
| if (copy_from_user(buf, user_buf, len)) |
| return -EFAULT; |
| |
| buf[len] = '\0'; |
| if (kstrtoint(buf, 0, &ceiling)) |
| return -EINVAL; |
| |
| if (ceiling < 0) |
| return -EINVAL; |
| |
| tlb_single_page_flush_ceiling = ceiling; |
| return count; |
| } |
| |
| static const struct file_operations fops_tlbflush = { |
| .read = tlbflush_read_file, |
| .write = tlbflush_write_file, |
| .llseek = default_llseek, |
| }; |
| |
| static int __init create_tlb_single_page_flush_ceiling(void) |
| { |
| debugfs_create_file("tlb_single_page_flush_ceiling", S_IRUSR | S_IWUSR, |
| arch_debugfs_dir, NULL, &fops_tlbflush); |
| return 0; |
| } |
| late_initcall(create_tlb_single_page_flush_ceiling); |
| |
| #endif /* CONFIG_SMP */ |