| /* Typhoon Radio Card driver for radio support |
| * (c) 1999 Dr. Henrik Seidel <Henrik.Seidel@gmx.de> |
| * |
| * Card manufacturer: |
| * http://194.18.155.92/idc/prod2.idc?nr=50753&lang=e |
| * |
| * Notes on the hardware |
| * |
| * This card has two output sockets, one for speakers and one for line. |
| * The speaker output has volume control, but only in four discrete |
| * steps. The line output has neither volume control nor mute. |
| * |
| * The card has auto-stereo according to its manual, although it all |
| * sounds mono to me (even with the Win/DOS drivers). Maybe it's my |
| * antenna - I really don't know for sure. |
| * |
| * Frequency control is done digitally. |
| * |
| * Volume control is done digitally, but there are only four different |
| * possible values. So you should better always turn the volume up and |
| * use line control. I got the best results by connecting line output |
| * to the sound card microphone input. For such a configuration the |
| * volume control has no effect, since volume control only influences |
| * the speaker output. |
| * |
| * There is no explicit mute/unmute. So I set the radio frequency to a |
| * value where I do expect just noise and turn the speaker volume down. |
| * The frequency change is necessary since the card never seems to be |
| * completely silent. |
| * |
| * Converted to V4L2 API by Mauro Carvalho Chehab <mchehab@infradead.org> |
| */ |
| |
| #include <linux/module.h> /* Modules */ |
| #include <linux/init.h> /* Initdata */ |
| #include <linux/ioport.h> /* request_region */ |
| #include <linux/proc_fs.h> /* radio card status report */ |
| #include <asm/io.h> /* outb, outb_p */ |
| #include <asm/uaccess.h> /* copy to/from user */ |
| #include <linux/videodev2.h> /* kernel radio structs */ |
| #include <media/v4l2-common.h> |
| |
| #include <linux/version.h> /* for KERNEL_VERSION MACRO */ |
| #define RADIO_VERSION KERNEL_VERSION(0,1,1) |
| #define BANNER "Typhoon Radio Card driver v0.1.1\n" |
| |
| static struct v4l2_queryctrl radio_qctrl[] = { |
| { |
| .id = V4L2_CID_AUDIO_MUTE, |
| .name = "Mute", |
| .minimum = 0, |
| .maximum = 1, |
| .default_value = 1, |
| .type = V4L2_CTRL_TYPE_BOOLEAN, |
| },{ |
| .id = V4L2_CID_AUDIO_VOLUME, |
| .name = "Volume", |
| .minimum = 0, |
| .maximum = 65535, |
| .step = 1<<14, |
| .default_value = 0xff, |
| .type = V4L2_CTRL_TYPE_INTEGER, |
| } |
| }; |
| |
| |
| #ifndef CONFIG_RADIO_TYPHOON_PORT |
| #define CONFIG_RADIO_TYPHOON_PORT -1 |
| #endif |
| |
| #ifndef CONFIG_RADIO_TYPHOON_MUTEFREQ |
| #define CONFIG_RADIO_TYPHOON_MUTEFREQ 0 |
| #endif |
| |
| #ifndef CONFIG_PROC_FS |
| #undef CONFIG_RADIO_TYPHOON_PROC_FS |
| #endif |
| |
| struct typhoon_device { |
| int users; |
| int iobase; |
| int curvol; |
| int muted; |
| unsigned long curfreq; |
| unsigned long mutefreq; |
| struct mutex lock; |
| }; |
| |
| static void typhoon_setvol_generic(struct typhoon_device *dev, int vol); |
| static int typhoon_setfreq_generic(struct typhoon_device *dev, |
| unsigned long frequency); |
| static int typhoon_setfreq(struct typhoon_device *dev, unsigned long frequency); |
| static void typhoon_mute(struct typhoon_device *dev); |
| static void typhoon_unmute(struct typhoon_device *dev); |
| static int typhoon_setvol(struct typhoon_device *dev, int vol); |
| #ifdef CONFIG_RADIO_TYPHOON_PROC_FS |
| static int typhoon_get_info(char *buf, char **start, off_t offset, int len); |
| #endif |
| |
| static void typhoon_setvol_generic(struct typhoon_device *dev, int vol) |
| { |
| mutex_lock(&dev->lock); |
| vol >>= 14; /* Map 16 bit to 2 bit */ |
| vol &= 3; |
| outb_p(vol / 2, dev->iobase); /* Set the volume, high bit. */ |
| outb_p(vol % 2, dev->iobase + 2); /* Set the volume, low bit. */ |
| mutex_unlock(&dev->lock); |
| } |
| |
| static int typhoon_setfreq_generic(struct typhoon_device *dev, |
| unsigned long frequency) |
| { |
| unsigned long outval; |
| unsigned long x; |
| |
| /* |
| * The frequency transfer curve is not linear. The best fit I could |
| * get is |
| * |
| * outval = -155 + exp((f + 15.55) * 0.057)) |
| * |
| * where frequency f is in MHz. Since we don't have exp in the kernel, |
| * I approximate this function by a third order polynomial. |
| * |
| */ |
| |
| mutex_lock(&dev->lock); |
| x = frequency / 160; |
| outval = (x * x + 2500) / 5000; |
| outval = (outval * x + 5000) / 10000; |
| outval -= (10 * x * x + 10433) / 20866; |
| outval += 4 * x - 11505; |
| |
| outb_p((outval >> 8) & 0x01, dev->iobase + 4); |
| outb_p(outval >> 9, dev->iobase + 6); |
| outb_p(outval & 0xff, dev->iobase + 8); |
| mutex_unlock(&dev->lock); |
| |
| return 0; |
| } |
| |
| static int typhoon_setfreq(struct typhoon_device *dev, unsigned long frequency) |
| { |
| typhoon_setfreq_generic(dev, frequency); |
| dev->curfreq = frequency; |
| return 0; |
| } |
| |
| static void typhoon_mute(struct typhoon_device *dev) |
| { |
| if (dev->muted == 1) |
| return; |
| typhoon_setvol_generic(dev, 0); |
| typhoon_setfreq_generic(dev, dev->mutefreq); |
| dev->muted = 1; |
| } |
| |
| static void typhoon_unmute(struct typhoon_device *dev) |
| { |
| if (dev->muted == 0) |
| return; |
| typhoon_setfreq_generic(dev, dev->curfreq); |
| typhoon_setvol_generic(dev, dev->curvol); |
| dev->muted = 0; |
| } |
| |
| static int typhoon_setvol(struct typhoon_device *dev, int vol) |
| { |
| if (dev->muted && vol != 0) { /* user is unmuting the card */ |
| dev->curvol = vol; |
| typhoon_unmute(dev); |
| return 0; |
| } |
| if (vol == dev->curvol) /* requested volume == current */ |
| return 0; |
| |
| if (vol == 0) { /* volume == 0 means mute the card */ |
| typhoon_mute(dev); |
| dev->curvol = vol; |
| return 0; |
| } |
| typhoon_setvol_generic(dev, vol); |
| dev->curvol = vol; |
| return 0; |
| } |
| |
| static int vidioc_querycap(struct file *file, void *priv, |
| struct v4l2_capability *v) |
| { |
| strlcpy(v->driver, "radio-typhoon", sizeof(v->driver)); |
| strlcpy(v->card, "Typhoon Radio", sizeof(v->card)); |
| sprintf(v->bus_info, "ISA"); |
| v->version = RADIO_VERSION; |
| v->capabilities = V4L2_CAP_TUNER; |
| return 0; |
| } |
| |
| static int vidioc_g_tuner(struct file *file, void *priv, |
| struct v4l2_tuner *v) |
| { |
| if (v->index > 0) |
| return -EINVAL; |
| |
| strcpy(v->name, "FM"); |
| v->type = V4L2_TUNER_RADIO; |
| v->rangelow = (87.5*16000); |
| v->rangehigh = (108*16000); |
| v->rxsubchans = V4L2_TUNER_SUB_MONO; |
| v->capability = V4L2_TUNER_CAP_LOW; |
| v->audmode = V4L2_TUNER_MODE_MONO; |
| v->signal = 0xFFFF; /* We can't get the signal strength */ |
| return 0; |
| } |
| |
| static int vidioc_s_tuner(struct file *file, void *priv, |
| struct v4l2_tuner *v) |
| { |
| if (v->index > 0) |
| return -EINVAL; |
| |
| return 0; |
| } |
| |
| static int vidioc_s_frequency(struct file *file, void *priv, |
| struct v4l2_frequency *f) |
| { |
| struct video_device *dev = video_devdata(file); |
| struct typhoon_device *typhoon = dev->priv; |
| |
| typhoon->curfreq = f->frequency; |
| typhoon_setfreq(typhoon, typhoon->curfreq); |
| return 0; |
| } |
| |
| static int vidioc_g_frequency(struct file *file, void *priv, |
| struct v4l2_frequency *f) |
| { |
| struct video_device *dev = video_devdata(file); |
| struct typhoon_device *typhoon = dev->priv; |
| |
| f->type = V4L2_TUNER_RADIO; |
| f->frequency = typhoon->curfreq; |
| |
| return 0; |
| } |
| |
| static int vidioc_queryctrl(struct file *file, void *priv, |
| struct v4l2_queryctrl *qc) |
| { |
| int i; |
| |
| for (i = 0; i < ARRAY_SIZE(radio_qctrl); i++) { |
| if (qc->id && qc->id == radio_qctrl[i].id) { |
| memcpy(qc, &(radio_qctrl[i]), |
| sizeof(*qc)); |
| return 0; |
| } |
| } |
| return -EINVAL; |
| } |
| |
| static int vidioc_g_ctrl(struct file *file, void *priv, |
| struct v4l2_control *ctrl) |
| { |
| struct video_device *dev = video_devdata(file); |
| struct typhoon_device *typhoon = dev->priv; |
| |
| switch (ctrl->id) { |
| case V4L2_CID_AUDIO_MUTE: |
| ctrl->value = typhoon->muted; |
| return 0; |
| case V4L2_CID_AUDIO_VOLUME: |
| ctrl->value = typhoon->curvol; |
| return 0; |
| } |
| return -EINVAL; |
| } |
| |
| static int vidioc_s_ctrl (struct file *file, void *priv, |
| struct v4l2_control *ctrl) |
| { |
| struct video_device *dev = video_devdata(file); |
| struct typhoon_device *typhoon = dev->priv; |
| |
| switch (ctrl->id) { |
| case V4L2_CID_AUDIO_MUTE: |
| if (ctrl->value) |
| typhoon_mute(typhoon); |
| else |
| typhoon_unmute(typhoon); |
| return 0; |
| case V4L2_CID_AUDIO_VOLUME: |
| typhoon_setvol(typhoon, ctrl->value); |
| return 0; |
| } |
| return -EINVAL; |
| } |
| |
| static int vidioc_g_audio(struct file *file, void *priv, |
| struct v4l2_audio *a) |
| { |
| if (a->index > 1) |
| return -EINVAL; |
| |
| strcpy(a->name, "Radio"); |
| a->capability = V4L2_AUDCAP_STEREO; |
| return 0; |
| } |
| |
| static int vidioc_g_input(struct file *filp, void *priv, unsigned int *i) |
| { |
| *i = 0; |
| return 0; |
| } |
| |
| static int vidioc_s_input(struct file *filp, void *priv, unsigned int i) |
| { |
| if (i != 0) |
| return -EINVAL; |
| return 0; |
| } |
| |
| static int vidioc_s_audio(struct file *file, void *priv, |
| struct v4l2_audio *a) |
| { |
| if (a->index != 0) |
| return -EINVAL; |
| return 0; |
| } |
| |
| static struct typhoon_device typhoon_unit = |
| { |
| .iobase = CONFIG_RADIO_TYPHOON_PORT, |
| .curfreq = CONFIG_RADIO_TYPHOON_MUTEFREQ, |
| .mutefreq = CONFIG_RADIO_TYPHOON_MUTEFREQ, |
| }; |
| |
| static const struct file_operations typhoon_fops = { |
| .owner = THIS_MODULE, |
| .open = video_exclusive_open, |
| .release = video_exclusive_release, |
| .ioctl = video_ioctl2, |
| .compat_ioctl = v4l_compat_ioctl32, |
| .llseek = no_llseek, |
| }; |
| |
| static struct video_device typhoon_radio = |
| { |
| .owner = THIS_MODULE, |
| .name = "Typhoon Radio", |
| .type = VID_TYPE_TUNER, |
| .hardware = 0, |
| .fops = &typhoon_fops, |
| .vidioc_querycap = vidioc_querycap, |
| .vidioc_g_tuner = vidioc_g_tuner, |
| .vidioc_s_tuner = vidioc_s_tuner, |
| .vidioc_g_audio = vidioc_g_audio, |
| .vidioc_s_audio = vidioc_s_audio, |
| .vidioc_g_input = vidioc_g_input, |
| .vidioc_s_input = vidioc_s_input, |
| .vidioc_g_frequency = vidioc_g_frequency, |
| .vidioc_s_frequency = vidioc_s_frequency, |
| .vidioc_queryctrl = vidioc_queryctrl, |
| .vidioc_g_ctrl = vidioc_g_ctrl, |
| .vidioc_s_ctrl = vidioc_s_ctrl, |
| }; |
| |
| #ifdef CONFIG_RADIO_TYPHOON_PROC_FS |
| |
| static int typhoon_get_info(char *buf, char **start, off_t offset, int len) |
| { |
| char *out = buf; |
| |
| #ifdef MODULE |
| #define MODULEPROCSTRING "Driver loaded as a module" |
| #else |
| #define MODULEPROCSTRING "Driver compiled into kernel" |
| #endif |
| |
| /* output must be kept under PAGE_SIZE */ |
| out += sprintf(out, BANNER); |
| out += sprintf(out, "Load type: " MODULEPROCSTRING "\n\n"); |
| out += sprintf(out, "frequency = %lu kHz\n", |
| typhoon_unit.curfreq >> 4); |
| out += sprintf(out, "volume = %d\n", typhoon_unit.curvol); |
| out += sprintf(out, "mute = %s\n", typhoon_unit.muted ? |
| "on" : "off"); |
| out += sprintf(out, "iobase = 0x%x\n", typhoon_unit.iobase); |
| out += sprintf(out, "mute frequency = %lu kHz\n", |
| typhoon_unit.mutefreq >> 4); |
| return out - buf; |
| } |
| |
| #endif /* CONFIG_RADIO_TYPHOON_PROC_FS */ |
| |
| MODULE_AUTHOR("Dr. Henrik Seidel"); |
| MODULE_DESCRIPTION("A driver for the Typhoon radio card (a.k.a. EcoRadio)."); |
| MODULE_LICENSE("GPL"); |
| |
| static int io = -1; |
| static int radio_nr = -1; |
| |
| module_param(io, int, 0); |
| MODULE_PARM_DESC(io, "I/O address of the Typhoon card (0x316 or 0x336)"); |
| module_param(radio_nr, int, 0); |
| |
| #ifdef MODULE |
| static unsigned long mutefreq = 0; |
| module_param(mutefreq, ulong, 0); |
| MODULE_PARM_DESC(mutefreq, "Frequency used when muting the card (in kHz)"); |
| #endif |
| |
| static int __init typhoon_init(void) |
| { |
| #ifdef MODULE |
| if (io == -1) { |
| printk(KERN_ERR "radio-typhoon: You must set an I/O address with io=0x316 or io=0x336\n"); |
| return -EINVAL; |
| } |
| typhoon_unit.iobase = io; |
| |
| if (mutefreq < 87000 || mutefreq > 108500) { |
| printk(KERN_ERR "radio-typhoon: You must set a frequency (in kHz) used when muting the card,\n"); |
| printk(KERN_ERR "radio-typhoon: e.g. with \"mutefreq=87500\" (87000 <= mutefreq <= 108500)\n"); |
| return -EINVAL; |
| } |
| typhoon_unit.mutefreq = mutefreq; |
| #endif /* MODULE */ |
| |
| printk(KERN_INFO BANNER); |
| mutex_init(&typhoon_unit.lock); |
| io = typhoon_unit.iobase; |
| if (!request_region(io, 8, "typhoon")) { |
| printk(KERN_ERR "radio-typhoon: port 0x%x already in use\n", |
| typhoon_unit.iobase); |
| return -EBUSY; |
| } |
| |
| typhoon_radio.priv = &typhoon_unit; |
| if (video_register_device(&typhoon_radio, VFL_TYPE_RADIO, radio_nr) == -1) |
| { |
| release_region(io, 8); |
| return -EINVAL; |
| } |
| printk(KERN_INFO "radio-typhoon: port 0x%x.\n", typhoon_unit.iobase); |
| printk(KERN_INFO "radio-typhoon: mute frequency is %lu kHz.\n", |
| typhoon_unit.mutefreq); |
| typhoon_unit.mutefreq <<= 4; |
| |
| /* mute card - prevents noisy bootups */ |
| typhoon_mute(&typhoon_unit); |
| |
| #ifdef CONFIG_RADIO_TYPHOON_PROC_FS |
| if (!create_proc_info_entry("driver/radio-typhoon", 0, NULL, |
| typhoon_get_info)) |
| printk(KERN_ERR "radio-typhoon: registering /proc/driver/radio-typhoon failed\n"); |
| #endif |
| |
| return 0; |
| } |
| |
| static void __exit typhoon_cleanup_module(void) |
| { |
| |
| #ifdef CONFIG_RADIO_TYPHOON_PROC_FS |
| remove_proc_entry("driver/radio-typhoon", NULL); |
| #endif |
| |
| video_unregister_device(&typhoon_radio); |
| release_region(io, 8); |
| } |
| |
| module_init(typhoon_init); |
| module_exit(typhoon_cleanup_module); |
| |