| # |
| # For a description of the syntax of this configuration file, |
| # see Documentation/kbuild/kconfig-language.txt. |
| # |
| |
| mainmenu "IA-64 Linux Kernel Configuration" |
| |
| source "init/Kconfig" |
| |
| menu "Processor type and features" |
| |
| config IA64 |
| bool |
| default y |
| help |
| The Itanium Processor Family is Intel's 64-bit successor to |
| the 32-bit X86 line. The IA-64 Linux project has a home |
| page at <http://www.linuxia64.org/> and a mailing list at |
| <linux-ia64@vger.kernel.org>. |
| |
| config 64BIT |
| bool |
| default y |
| |
| config MMU |
| bool |
| default y |
| |
| config SWIOTLB |
| bool |
| default y |
| |
| config RWSEM_XCHGADD_ALGORITHM |
| bool |
| default y |
| |
| config GENERIC_CALIBRATE_DELAY |
| bool |
| default y |
| |
| config TIME_INTERPOLATION |
| bool |
| default y |
| |
| config EFI |
| bool |
| default y |
| |
| config GENERIC_IOMAP |
| bool |
| default y |
| |
| config SCHED_NO_NO_OMIT_FRAME_POINTER |
| bool |
| default y |
| |
| config IA64_UNCACHED_ALLOCATOR |
| bool |
| select GENERIC_ALLOCATOR |
| |
| choice |
| prompt "System type" |
| default IA64_GENERIC |
| |
| config IA64_GENERIC |
| bool "generic" |
| select ACPI |
| select NUMA |
| select ACPI_NUMA |
| help |
| This selects the system type of your hardware. A "generic" kernel |
| will run on any supported IA-64 system. However, if you configure |
| a kernel for your specific system, it will be faster and smaller. |
| |
| generic For any supported IA-64 system |
| DIG-compliant For DIG ("Developer's Interface Guide") compliant systems |
| HP-zx1/sx1000 For HP systems |
| HP-zx1/sx1000+swiotlb For HP systems with (broken) DMA-constrained devices. |
| SGI-SN2 For SGI Altix systems |
| Ski-simulator For the HP simulator <http://www.hpl.hp.com/research/linux/ski/> |
| |
| If you don't know what to do, choose "generic". |
| |
| config IA64_DIG |
| bool "DIG-compliant" |
| |
| config IA64_HP_ZX1 |
| bool "HP-zx1/sx1000" |
| help |
| Build a kernel that runs on HP zx1 and sx1000 systems. This adds |
| support for the HP I/O MMU. |
| |
| config IA64_HP_ZX1_SWIOTLB |
| bool "HP-zx1/sx1000 with software I/O TLB" |
| help |
| Build a kernel that runs on HP zx1 and sx1000 systems even when they |
| have broken PCI devices which cannot DMA to full 32 bits. Apart |
| from support for the HP I/O MMU, this includes support for the software |
| I/O TLB, which allows supporting the broken devices at the expense of |
| wasting some kernel memory (about 2MB by default). |
| |
| config IA64_SGI_SN2 |
| bool "SGI-SN2" |
| help |
| Selecting this option will optimize the kernel for use on sn2 based |
| systems, but the resulting kernel binary will not run on other |
| types of ia64 systems. If you have an SGI Altix system, it's safe |
| to select this option. If in doubt, select ia64 generic support |
| instead. |
| |
| config IA64_HP_SIM |
| bool "Ski-simulator" |
| |
| endchoice |
| |
| choice |
| prompt "Processor type" |
| default ITANIUM |
| |
| config ITANIUM |
| bool "Itanium" |
| help |
| Select your IA-64 processor type. The default is Itanium. |
| This choice is safe for all IA-64 systems, but may not perform |
| optimally on systems with, say, Itanium 2 or newer processors. |
| |
| config MCKINLEY |
| bool "Itanium 2" |
| help |
| Select this to configure for an Itanium 2 (McKinley) processor. |
| |
| endchoice |
| |
| choice |
| prompt "Kernel page size" |
| default IA64_PAGE_SIZE_16KB |
| |
| config IA64_PAGE_SIZE_4KB |
| bool "4KB" |
| help |
| This lets you select the page size of the kernel. For best IA-64 |
| performance, a page size of 8KB or 16KB is recommended. For best |
| IA-32 compatibility, a page size of 4KB should be selected (the vast |
| majority of IA-32 binaries work perfectly fine with a larger page |
| size). For Itanium 2 or newer systems, a page size of 64KB can also |
| be selected. |
| |
| 4KB For best IA-32 compatibility |
| 8KB For best IA-64 performance |
| 16KB For best IA-64 performance |
| 64KB Requires Itanium 2 or newer processor. |
| |
| If you don't know what to do, choose 16KB. |
| |
| config IA64_PAGE_SIZE_8KB |
| bool "8KB" |
| |
| config IA64_PAGE_SIZE_16KB |
| bool "16KB" |
| |
| config IA64_PAGE_SIZE_64KB |
| depends on !ITANIUM |
| bool "64KB" |
| |
| endchoice |
| |
| source kernel/Kconfig.hz |
| |
| config IA64_BRL_EMU |
| bool |
| depends on ITANIUM |
| default y |
| |
| # align cache-sensitive data to 128 bytes |
| config IA64_L1_CACHE_SHIFT |
| int |
| default "7" if MCKINLEY |
| default "6" if ITANIUM |
| |
| # align cache-sensitive data to 64 bytes |
| config IA64_CYCLONE |
| bool "Cyclone (EXA) Time Source support" |
| help |
| Say Y here to enable support for IBM EXA Cyclone time source. |
| If you're unsure, answer N. |
| |
| config IOSAPIC |
| bool |
| depends on !IA64_HP_SIM |
| default y |
| |
| config IA64_SGI_SN_XP |
| tristate "Support communication between SGI SSIs" |
| select IA64_UNCACHED_ALLOCATOR |
| help |
| An SGI machine can be divided into multiple Single System |
| Images which act independently of each other and have |
| hardware based memory protection from the others. Enabling |
| this feature will allow for direct communication between SSIs |
| based on a network adapter and DMA messaging. |
| |
| config FORCE_MAX_ZONEORDER |
| int "MAX_ORDER (11 - 17)" if !HUGETLB_PAGE |
| range 11 17 if !HUGETLB_PAGE |
| default "17" if HUGETLB_PAGE |
| default "11" |
| |
| config SMP |
| bool "Symmetric multi-processing support" |
| help |
| This enables support for systems with more than one CPU. If you have |
| a system with only one CPU, say N. If you have a system with more |
| than one CPU, say Y. |
| |
| If you say N here, the kernel will run on single and multiprocessor |
| systems, but will use only one CPU of a multiprocessor system. If |
| you say Y here, the kernel will run on many, but not all, |
| single processor systems. On a single processor system, the kernel |
| will run faster if you say N here. |
| |
| See also the <file:Documentation/smp.txt> and the SMP-HOWTO |
| available at <http://www.tldp.org/docs.html#howto>. |
| |
| If you don't know what to do here, say N. |
| |
| config NR_CPUS |
| int "Maximum number of CPUs (2-1024)" |
| range 2 1024 |
| depends on SMP |
| default "64" |
| help |
| You should set this to the number of CPUs in your system, but |
| keep in mind that a kernel compiled for, e.g., 2 CPUs will boot but |
| only use 2 CPUs on a >2 CPU system. Setting this to a value larger |
| than 64 will cause the use of a CPU mask array, causing a small |
| performance hit. |
| |
| config HOTPLUG_CPU |
| bool "Support for hot-pluggable CPUs (EXPERIMENTAL)" |
| depends on SMP && EXPERIMENTAL |
| select HOTPLUG |
| default n |
| ---help--- |
| Say Y here to experiment with turning CPUs off and on. CPUs |
| can be controlled through /sys/devices/system/cpu/cpu#. |
| Say N if you want to disable CPU hotplug. |
| |
| config SCHED_SMT |
| bool "SMT scheduler support" |
| depends on SMP |
| default off |
| help |
| Improves the CPU scheduler's decision making when dealing with |
| Intel IA64 chips with MultiThreading at a cost of slightly increased |
| overhead in some places. If unsure say N here. |
| |
| config PREEMPT |
| bool "Preemptible Kernel" |
| help |
| This option reduces the latency of the kernel when reacting to |
| real-time or interactive events by allowing a low priority process to |
| be preempted even if it is in kernel mode executing a system call. |
| This allows applications to run more reliably even when the system is |
| under load. |
| |
| Say Y here if you are building a kernel for a desktop, embedded |
| or real-time system. Say N if you are unsure. |
| |
| source "mm/Kconfig" |
| |
| config ARCH_SELECT_MEMORY_MODEL |
| def_bool y |
| |
| config ARCH_DISCONTIGMEM_ENABLE |
| def_bool y |
| help |
| Say Y to support efficient handling of discontiguous physical memory, |
| for architectures which are either NUMA (Non-Uniform Memory Access) |
| or have huge holes in the physical address space for other reasons. |
| See <file:Documentation/vm/numa> for more. |
| |
| config ARCH_FLATMEM_ENABLE |
| def_bool y |
| |
| config ARCH_SPARSEMEM_ENABLE |
| def_bool y |
| depends on ARCH_DISCONTIGMEM_ENABLE |
| |
| config ARCH_DISCONTIGMEM_DEFAULT |
| def_bool y if (IA64_SGI_SN2 || IA64_GENERIC || IA64_HP_ZX1 || IA64_HP_ZX1_SWIOTLB) |
| depends on ARCH_DISCONTIGMEM_ENABLE |
| |
| config NUMA |
| bool "NUMA support" |
| depends on !IA64_HP_SIM && !FLATMEM |
| default y if IA64_SGI_SN2 |
| help |
| Say Y to compile the kernel to support NUMA (Non-Uniform Memory |
| Access). This option is for configuring high-end multiprocessor |
| server systems. If in doubt, say N. |
| |
| # VIRTUAL_MEM_MAP and FLAT_NODE_MEM_MAP are functionally equivalent. |
| # VIRTUAL_MEM_MAP has been retained for historical reasons. |
| config VIRTUAL_MEM_MAP |
| bool "Virtual mem map" |
| depends on !SPARSEMEM |
| default y if !IA64_HP_SIM |
| help |
| Say Y to compile the kernel with support for a virtual mem map. |
| This code also only takes effect if a memory hole of greater than |
| 1 Gb is found during boot. You must turn this option on if you |
| require the DISCONTIGMEM option for your machine. If you are |
| unsure, say Y. |
| |
| config HOLES_IN_ZONE |
| bool |
| default y if VIRTUAL_MEM_MAP |
| |
| config HAVE_ARCH_EARLY_PFN_TO_NID |
| def_bool y |
| depends on NEED_MULTIPLE_NODES |
| |
| config IA32_SUPPORT |
| bool "Support for Linux/x86 binaries" |
| help |
| IA-64 processors can execute IA-32 (X86) instructions. By |
| saying Y here, the kernel will include IA-32 system call |
| emulation support which makes it possible to transparently |
| run IA-32 Linux binaries on an IA-64 Linux system. |
| If in doubt, say Y. |
| |
| config COMPAT |
| bool |
| depends on IA32_SUPPORT |
| default y |
| |
| config IA64_MCA_RECOVERY |
| tristate "MCA recovery from errors other than TLB." |
| |
| config PERFMON |
| bool "Performance monitor support" |
| help |
| Selects whether support for the IA-64 performance monitor hardware |
| is included in the kernel. This makes some kernel data-structures a |
| little bigger and slows down execution a bit, but it is generally |
| a good idea to turn this on. If you're unsure, say Y. |
| |
| config IA64_PALINFO |
| tristate "/proc/pal support" |
| help |
| If you say Y here, you are able to get PAL (Processor Abstraction |
| Layer) information in /proc/pal. This contains useful information |
| about the processors in your systems, such as cache and TLB sizes |
| and the PAL firmware version in use. |
| |
| To use this option, you have to ensure that the "/proc file system |
| support" (CONFIG_PROC_FS) is enabled, too. |
| |
| source "drivers/firmware/Kconfig" |
| |
| source "fs/Kconfig.binfmt" |
| |
| endmenu |
| |
| menu "Power management and ACPI" |
| |
| source "kernel/power/Kconfig" |
| |
| source "drivers/acpi/Kconfig" |
| |
| if PM |
| |
| source "arch/ia64/kernel/cpufreq/Kconfig" |
| |
| endif |
| |
| endmenu |
| |
| if !IA64_HP_SIM |
| |
| menu "Bus options (PCI, PCMCIA)" |
| |
| config PCI |
| bool "PCI support" |
| help |
| Real IA-64 machines all have PCI/PCI-X/PCI Express busses. Say Y |
| here unless you are using a simulator without PCI support. |
| |
| config PCI_DOMAINS |
| bool |
| default PCI |
| |
| source "drivers/pci/Kconfig" |
| |
| source "drivers/pci/hotplug/Kconfig" |
| |
| source "drivers/pcmcia/Kconfig" |
| |
| endmenu |
| |
| endif |
| |
| source "net/Kconfig" |
| |
| source "drivers/Kconfig" |
| |
| source "fs/Kconfig" |
| |
| source "lib/Kconfig" |
| |
| # |
| # Use the generic interrupt handling code in kernel/irq/: |
| # |
| config GENERIC_HARDIRQS |
| bool |
| default y |
| |
| config GENERIC_IRQ_PROBE |
| bool |
| default y |
| |
| config GENERIC_PENDING_IRQ |
| bool |
| depends on GENERIC_HARDIRQS && SMP |
| default y |
| |
| source "arch/ia64/hp/sim/Kconfig" |
| |
| menu "Instrumentation Support" |
| depends on EXPERIMENTAL |
| |
| source "arch/ia64/oprofile/Kconfig" |
| |
| config KPROBES |
| bool "Kprobes (EXPERIMENTAL)" |
| help |
| Kprobes allows you to trap at almost any kernel address and |
| execute a callback function. register_kprobe() establishes |
| a probepoint and specifies the callback. Kprobes is useful |
| for kernel debugging, non-intrusive instrumentation and testing. |
| If in doubt, say "N". |
| endmenu |
| |
| source "arch/ia64/Kconfig.debug" |
| |
| source "security/Kconfig" |
| |
| source "crypto/Kconfig" |